From: "André Lochotzke" <Andre.Lochotzke@stud.fh-erfurt.de>
To: oselas@community.pengutronix.de, barebox@lists.infradead.org
Subject: NOR boot support for barebox on the mini2440
Date: Wed, 06 Jun 2012 14:00:02 +0200 [thread overview]
Message-ID: <1338984002.2874.12.camel@andre> (raw)
Hello,
for a small student project I want to add support to barebox for booting
from the NOR flash on the mini2440. I hope that it will not be too
difficult since barebox can already boot from NOR on different boards.
Did somebody already do some work to enable NOR boot on the mini2440?
Do you have any suggestion of where I should start?
There is already an u-boot version since 2010 [1] that supports it. The
code can be found here [2].
Are the u-boot and barebox NOR subsystems very different? How much time
do you think would it take to get this done?
Regards
André
[1]
http://bliterness.blogspot.de/2010/04/new-nor-flash-support-in-u-boot.html
[2] http://repo.or.cz/w/u-boot-openmoko/mini2440.git
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-06-06 13:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 12:00 André Lochotzke [this message]
2012-06-07 18:13 ` Sascha Hauer
2012-06-06 12:01 André Lochotzke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338984002.2874.12.camel@andre \
--to=andre.lochotzke@stud.fh-erfurt.de \
--cc=barebox@lists.infradead.org \
--cc=oselas@community.pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox