* [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module
@ 2012-07-04 13:07 Maxime Ripard
2012-07-04 13:07 ` [PATCH 1/2] Add bootargs script to boot on ext filesystems Maxime Ripard
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Maxime Ripard @ 2012-07-04 13:07 UTC (permalink / raw)
To: barebox; +Cc: brian
Hi everyone,
This is the second version of the initial support of the CFA-10036 module.
The module basically has a iMX28 SoC, plus a micro-SD slot, 3 pins to
access the DUART, a USB OTG port, a OLED screen using the Solomon
SSD1307 controller over I2C and a 200-pins SODIMM port to plug an
expansion board.
Support for this board and the additional devices will come
eventually.
Changes from v1:
* Switched to the new default environment
Maxime Ripard (2):
Add bootargs script to boot on ext filesystems
Add support for the Crystalfontz CFA-10036 board
arch/arm/Makefile | 1 +
arch/arm/boards/crystalfontz-cfa10036/Makefile | 1 +
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 106 ++++++++++++++++++++
arch/arm/boards/crystalfontz-cfa10036/config.h | 16 +++
.../boards/crystalfontz-cfa10036/env/boot/mmc-ext3 | 10 ++
.../crystalfontz-cfa10036/env/init/automount | 9 ++
.../crystalfontz-cfa10036/env/init/bootargs-base | 8 ++
.../boards/crystalfontz-cfa10036/env/init/general | 12 +++
.../boards/crystalfontz-cfa10036/env/init/hostname | 8 ++
arch/arm/configs/cfa10036_defconfig | 42 ++++++++
arch/arm/mach-mxs/Kconfig | 8 ++
defaultenv-2/base/bin/bootargs-root-ext | 12 +++
12 files changed, 233 insertions(+)
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/Makefile
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/config.h
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/boot/mmc-ext3
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/automount
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/bootargs-base
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/general
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/hostname
create mode 100644 arch/arm/configs/cfa10036_defconfig
create mode 100644 defaultenv-2/base/bin/bootargs-root-ext
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/2] Add bootargs script to boot on ext filesystems
2012-07-04 13:07 [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module Maxime Ripard
@ 2012-07-04 13:07 ` Maxime Ripard
2012-07-04 13:07 ` [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board Maxime Ripard
2012-07-04 21:28 ` [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Maxime Ripard @ 2012-07-04 13:07 UTC (permalink / raw)
To: barebox; +Cc: brian
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
---
defaultenv-2/base/bin/bootargs-root-ext | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 defaultenv-2/base/bin/bootargs-root-ext
diff --git a/defaultenv-2/base/bin/bootargs-root-ext b/defaultenv-2/base/bin/bootargs-root-ext
new file mode 100644
index 0000000..45fcd5a
--- /dev/null
+++ b/defaultenv-2/base/bin/bootargs-root-ext
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+while getopt "m:r:" opt; do
+ if [ ${opt} = m ]; then
+ part=${OPTARG}
+ fi
+ if [ ${opt} = r ]; then
+ type=${OPTARG}
+ fi
+done
+
+global.linux.bootargs.root="root=/dev/$part rootfstype=ext$type rootwait"
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board
2012-07-04 13:07 [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module Maxime Ripard
2012-07-04 13:07 ` [PATCH 1/2] Add bootargs script to boot on ext filesystems Maxime Ripard
@ 2012-07-04 13:07 ` Maxime Ripard
2012-07-04 21:28 ` [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Maxime Ripard @ 2012-07-04 13:07 UTC (permalink / raw)
To: barebox; +Cc: brian
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/crystalfontz-cfa10036/Makefile | 1 +
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 106 ++++++++++++++++++++
arch/arm/boards/crystalfontz-cfa10036/config.h | 16 +++
.../boards/crystalfontz-cfa10036/env/boot/mmc-ext3 | 10 ++
.../crystalfontz-cfa10036/env/init/automount | 9 ++
.../crystalfontz-cfa10036/env/init/bootargs-base | 8 ++
.../boards/crystalfontz-cfa10036/env/init/general | 12 +++
.../boards/crystalfontz-cfa10036/env/init/hostname | 8 ++
arch/arm/configs/cfa10036_defconfig | 42 ++++++++
arch/arm/mach-mxs/Kconfig | 8 ++
11 files changed, 221 insertions(+)
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/Makefile
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/config.h
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/boot/mmc-ext3
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/automount
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/bootargs-base
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/general
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/hostname
create mode 100644 arch/arm/configs/cfa10036_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bd684dc..b8280fe 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -118,6 +118,7 @@ board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
board-$(CONFIG_MACH_CHUMBY) := chumby_falconwing
board-$(CONFIG_MACH_TX28) := karo-tx28
board-$(CONFIG_MACH_MX28EVK) := freescale-mx28-evk
+board-$(CONFIG_MACH_CFA10036) := crystalfontz-cfa10036
board-$(CONFIG_MACH_FREESCALE_MX51_PDK) := freescale-mx51-pdk
board-$(CONFIG_MACH_FREESCALE_MX53_LOCO) := freescale-mx53-loco
board-$(CONFIG_MACH_FREESCALE_MX53_SMD) := freescale-mx53-smd
diff --git a/arch/arm/boards/crystalfontz-cfa10036/Makefile b/arch/arm/boards/crystalfontz-cfa10036/Makefile
new file mode 100644
index 0000000..75f0020
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/Makefile
@@ -0,0 +1 @@
+obj-y += cfa10036.o
diff --git a/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c b/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
new file mode 100644
index 0000000..e454afd
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2010 Juergen Beisert, Pengutronix <kernel@pengutronix.de>
+ * Copyright (C) 2011 Marc Kleine-Budde, Pengutronix <mkl@pengutronix.de>
+ * Copyright (C) 2011 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ * Copyright (C) 2012 Maxime Ripard, Free Electrons <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <environment.h>
+#include <errno.h>
+#include <fec.h>
+#include <gpio.h>
+#include <init.h>
+#include <mci.h>
+#include <io.h>
+
+#include <mach/clock.h>
+#include <mach/imx-regs.h>
+#include <mach/iomux-imx28.h>
+#include <mach/mci.h>
+
+#include <asm/armlinux.h>
+#include <asm/mmu.h>
+
+#include <mach/fb.h>
+
+#include <generated/mach-types.h>
+
+/* setup the CPU card internal signals */
+static const uint32_t cfa10036_pads[] = {
+ /* duart */
+ FUNC(2) | PORTF(3, 2) | VE_3_3V,
+ FUNC(2) | PORTF(3, 3) | VE_3_3V,
+
+ /* mmc0 */
+ SSP0_D0 | VE_3_3V | PULLUP(1),
+ SSP0_D1 | VE_3_3V | PULLUP(1),
+ SSP0_D2 | VE_3_3V | PULLUP(1),
+ SSP0_D3 | VE_3_3V | PULLUP(1),
+ SSP0_D4 | VE_3_3V | PULLUP(1),
+ SSP0_D5 | VE_3_3V | PULLUP(1),
+ SSP0_D6 | VE_3_3V | PULLUP(1),
+ SSP0_D7 | VE_3_3V | PULLUP(1),
+ SSP0_CMD | VE_3_3V | PULLUP(1),
+ SSP0_CD | VE_3_3V | PULLUP(1),
+ SSP0_SCK | VE_3_3V | BITKEEPER(0),
+ /* MCI slot power control 1 = off */
+ PWM3_GPIO | VE_3_3V | GPIO_OUT | GPIO_VALUE(0),
+};
+
+static struct mxs_mci_platform_data mci_pdata = {
+ .caps = MMC_MODE_8BIT,
+ .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, /* fixed to 3.3 V */
+ .f_min = 400 * 1000,
+ .f_max = 25000000,
+};
+
+static int cfa10036_mem_init(void)
+{
+ arm_add_mem_device("ram0", IMX_MEMORY_BASE, 128 * 1024 * 1024);
+
+ return 0;
+}
+mem_initcall(cfa10036_mem_init);
+
+static int cfa10036_devices_init(void)
+{
+ int i;
+
+ /* initizalize muxing */
+ for (i = 0; i < ARRAY_SIZE(cfa10036_pads); i++)
+ imx_gpio_mode(cfa10036_pads[i]);
+
+ /* enable IOCLK0 to run at the PLL frequency */
+ imx_set_ioclk(0, 480000000);
+ /* run the SSP unit clock at 100 MHz */
+ imx_set_sspclk(0, 100000000, 1);
+
+ armlinux_set_bootparams((void *)IMX_MEMORY_BASE + 0x100);
+ armlinux_set_architecture(MACH_TYPE_CFA10036);
+
+ add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, 0,
+ IORESOURCE_MEM, &mci_pdata);
+
+ return 0;
+}
+device_initcall(cfa10036_devices_init);
+
+static int cfa10036_console_init(void)
+{
+ add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192,
+ IORESOURCE_MEM, NULL);
+
+ return 0;
+}
+console_initcall(cfa10036_console_init);
diff --git a/arch/arm/boards/crystalfontz-cfa10036/config.h b/arch/arm/boards/crystalfontz-cfa10036/config.h
new file mode 100644
index 0000000..8f18fda
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/config.h
@@ -0,0 +1,16 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CONFIG_H_
+# define _CONFIG_H_
+
+#endif /* _CONFIG_H_ */
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/boot/mmc-ext3 b/arch/arm/boards/crystalfontz-cfa10036/env/boot/mmc-ext3
new file mode 100644
index 0000000..7d7eb50
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/boot/mmc-ext3
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "MMC (ext)"
+ exit
+fi
+
+global.bootm.image="/mnt/disk0.1/zImage-cfa10036"
+global.bootm.oftree="/mnt/disk0.1/oftree-cfa10036"
+bootargs-root-ext -r 3 -m mmcblk0p3
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/init/automount b/arch/arm/boards/crystalfontz-cfa10036/env/init/automount
new file mode 100644
index 0000000..fe67e55
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/init/automount
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Automountpoints"
+ exit
+fi
+
+mkdir -p /mnt/disk0.1
+automount -d /mnt/disk0.1 '[ -e /dev/disk0.1 ] && mount /dev/disk0.1 fat /mnt/disk0.1'
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/init/bootargs-base b/arch/arm/boards/crystalfontz-cfa10036/env/init/bootargs-base
new file mode 100644
index 0000000..4dda550
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/init/bootargs-base
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Base bootargs"
+ exit
+fi
+
+global.linux.bootargs.base="console=ttyAMA0,115200"
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/init/general b/arch/arm/boards/crystalfontz-cfa10036/env/init/general
new file mode 100644
index 0000000..5cb3a75
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/init/general
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "general config settings"
+ exit
+fi
+
+# timeout in seconds before the default boot entry is started
+global.autoboot_timeout=3
+
+# default boot entry (one of /env/boot/*)
+global.boot.default=mmc-ext3
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/init/hostname b/arch/arm/boards/crystalfontz-cfa10036/env/init/hostname
new file mode 100644
index 0000000..1dbe346
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/init/hostname
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "hostname"
+ exit
+fi
+
+global.hostname=cfa10036
diff --git a/arch/arm/configs/cfa10036_defconfig b/arch/arm/configs/cfa10036_defconfig
new file mode 100644
index 0000000..67a0e8f
--- /dev/null
+++ b/arch/arm/configs/cfa10036_defconfig
@@ -0,0 +1,42 @@
+CONFIG_ARCH_MXS=y
+CONFIG_ARCH_IMX28=y
+CONFIG_MACH_CFA10036=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x43000000
+CONFIG_MALLOC_SIZE=0x800000
+CONFIG_BROKEN=y
+CONFIG_LONGHELP=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/crystalfontz-cfa10036/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_MXS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 3348a3c..aa5f241 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -6,12 +6,14 @@ config ARCH_TEXT_BASE
default 0x42000000 if MACH_CHUMBY
default 0x47000000 if MACH_TX28
default 0x47000000 if MACH_MX28EVK
+ default 0x47000000 if MACH_CFA10036
config BOARDINFO
default "Freescale i.MX23-EVK" if MACH_MX23EVK
default "Chumby Falconwing" if MACH_CHUMBY
default "Karo TX28" if MACH_TX28
default "Freescale i.MX28-EVK" if MACH_MX28EVK
+ default "Crystalfontz CFA-10036" if MACH_CFA10036
comment "Freescale i.MX System-on-Chip"
@@ -64,6 +66,12 @@ config MACH_MX28EVK
help
Say Y here if you are using the Freescale i.MX28-EVK board
+config MACH_CFA10036
+ bool "cfa-10036"
+ select HAVE_DEFAULT_ENVIRONMENT_NEW
+ help
+ Say Y here if you are using the Crystalfontz CFA-10036 module
+
endchoice
endif
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module
2012-07-04 13:07 [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module Maxime Ripard
2012-07-04 13:07 ` [PATCH 1/2] Add bootargs script to boot on ext filesystems Maxime Ripard
2012-07-04 13:07 ` [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board Maxime Ripard
@ 2012-07-04 21:28 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2012-07-04 21:28 UTC (permalink / raw)
To: Maxime Ripard; +Cc: barebox, brian
On Wed, Jul 04, 2012 at 03:07:51PM +0200, Maxime Ripard wrote:
> Hi everyone,
>
> This is the second version of the initial support of the CFA-10036 module.
>
> The module basically has a iMX28 SoC, plus a micro-SD slot, 3 pins to
> access the DUART, a USB OTG port, a OLED screen using the Solomon
> SSD1307 controller over I2C and a 200-pins SODIMM port to plug an
> expansion board.
>
> Support for this board and the additional devices will come
> eventually.
>
> Changes from v1:
> * Switched to the new default environment
>
> Maxime Ripard (2):
> Add bootargs script to boot on ext filesystems
> Add support for the Crystalfontz CFA-10036 board
>
Applied, thanks
Sascha
> arch/arm/Makefile | 1 +
> arch/arm/boards/crystalfontz-cfa10036/Makefile | 1 +
> arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 106 ++++++++++++++++++++
> arch/arm/boards/crystalfontz-cfa10036/config.h | 16 +++
> .../boards/crystalfontz-cfa10036/env/boot/mmc-ext3 | 10 ++
> .../crystalfontz-cfa10036/env/init/automount | 9 ++
> .../crystalfontz-cfa10036/env/init/bootargs-base | 8 ++
> .../boards/crystalfontz-cfa10036/env/init/general | 12 +++
> .../boards/crystalfontz-cfa10036/env/init/hostname | 8 ++
> arch/arm/configs/cfa10036_defconfig | 42 ++++++++
> arch/arm/mach-mxs/Kconfig | 8 ++
> defaultenv-2/base/bin/bootargs-root-ext | 12 +++
> 12 files changed, 233 insertions(+)
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/Makefile
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/config.h
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/boot/mmc-ext3
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/automount
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/bootargs-base
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/general
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/hostname
> create mode 100644 arch/arm/configs/cfa10036_defconfig
> create mode 100644 defaultenv-2/base/bin/bootargs-root-ext
>
> --
> 1.7.9.5
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-07-04 21:29 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-04 13:07 [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module Maxime Ripard
2012-07-04 13:07 ` [PATCH 1/2] Add bootargs script to boot on ext filesystems Maxime Ripard
2012-07-04 13:07 ` [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board Maxime Ripard
2012-07-04 21:28 ` [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox