mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch
Date: Fri,  6 Jul 2012 11:45:58 +0200	[thread overview]
Message-ID: <1341567958-8543-1-git-send-email-jlu@pengutronix.de> (raw)

It start the switch and provides basic access to the registers.

This driver could also work with some other Micrel switches, possibly
with some small changes.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
 drivers/net/Kconfig      |    7 ++
 drivers/net/Makefile     |    1 +
 drivers/net/ksz8864rmn.c |  177 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 drivers/net/ksz8864rmn.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 172cc39..2abea9b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -110,5 +110,12 @@ config DRIVER_NET_KS8851_MLL
 
 source "drivers/net/usb/Kconfig"
 
+config DRIVER_NET_MICREL
+	depends on SPI
+	bool "Micrel KSZ8864RMN Ethernet Switch driver"
+	help
+	  This option enables support for enabling the Micrel
+	  KSZ8864RMN Ethernet Switch over SPI.
+
 endmenu
 
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 34dbee9..e7b1e2d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_MIIDEV)			+= miidev.o
 obj-$(CONFIG_NET_USB)			+= usb/
 obj-$(CONFIG_DRIVER_NET_TSE)		+= altera_tse.o
 obj-$(CONFIG_DRIVER_NET_KS8851_MLL)	+= ks8851_mll.o
+obj-$(CONFIG_DRIVER_NET_MICREL)		+= ksz8864rmn.o
diff --git a/drivers/net/ksz8864rmn.c b/drivers/net/ksz8864rmn.c
new file mode 100644
index 0000000..2f86c77
--- /dev/null
+++ b/drivers/net/ksz8864rmn.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2012 Jan Luebbe, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <spi/spi.h>
+#include <errno.h>
+
+#define REG_ID0			0x00
+#define REG_ID1			0x01
+
+#define REG_GC00		0x02
+#define REG_GC01		0x03
+#define REG_GC02		0x04
+#define REG_GC03		0x05
+#define REG_GC04		0x06
+#define REG_GC05		0x07
+#define REG_GC06		0x08
+#define REG_GC07		0x09
+#define REG_GC08		0x0a
+#define REG_GC09		0x0b
+#define REG_GC10		0x0c
+#define REG_GC11		0x0d
+
+#define REG_PSTAT1(p)		(0x10 * p + 0xe)
+#define REG_PSTAT2(p)		(0x10 * p + 0xf)
+
+#define CMD_WRITE		0x02
+#define CMD_READ		0x03
+
+static int micrel_switch_read_reg(struct spi_device *spi, uint8_t reg)
+{
+	uint8_t tx[2];
+	uint8_t rx[1];
+	int ret;
+
+	tx[0] = CMD_READ;
+	tx[1] = reg;
+
+	ret = spi_write_then_read(spi, tx, 2, rx, 1);
+	if (ret < 0)
+		return ret;
+
+	return rx[0];
+}
+
+static void micrel_switch_write_reg(struct spi_device *spi, uint8_t reg, uint8_t val)
+{
+	uint8_t tx[3];
+
+	tx[0] = CMD_WRITE;
+	tx[1] = reg;
+	tx[2] = val;
+
+	spi_write_then_read(spi, tx, 3, NULL, 0);
+}
+
+static int micrel_switch_enable_set(struct device_d *dev, struct param_d *param,
+		const char *val)
+{
+	struct spi_device *spi = (struct spi_device *)dev->type_data;
+	int enable;
+	char *new;
+
+	if (!val)
+		return dev_param_set_generic(dev, param, NULL);
+
+	enable = simple_strtoul(val, NULL, 0);
+
+	if (enable) {
+		micrel_switch_write_reg(spi, REG_ID1, 1);
+		new = "1";
+	} else {
+		micrel_switch_write_reg(spi, REG_ID1, 0);
+		new = "0";
+	}
+
+	dev_param_set_generic(dev, param, new);
+
+	return 0;
+}
+
+static void micrel_switch_print_reg(struct spi_device *spi, const char *name, uint8_t reg)
+{
+	uint8_t tx[2];
+	uint8_t rx[1];
+	int ret;
+
+	tx[0] = CMD_READ;
+	tx[1] = reg;
+
+	ret = spi_write_then_read(spi, tx, 2, rx, 1);
+	if (ret < 0)
+		printf("%s@0x%02x: SPI error\n", name, reg);
+
+	printf("%s@0x%02x: 0x%02x\n", name, reg, rx[0]);
+}
+
+static void micrel_switch_info(struct device_d *dev)
+{
+	struct spi_device *spi = (struct spi_device *)dev->type_data;
+
+	printf("Registers:\n");
+	micrel_switch_print_reg(spi, " Chip ID 0", REG_ID0);
+	micrel_switch_print_reg(spi, " Chip ID 1", REG_ID1);
+	micrel_switch_print_reg(spi, " Global Control  0", REG_GC00);
+	micrel_switch_print_reg(spi, " Global Control  1", REG_GC01);
+	micrel_switch_print_reg(spi, " Global Control  2", REG_GC02);
+	micrel_switch_print_reg(spi, " Global Control  3", REG_GC03);
+	micrel_switch_print_reg(spi, " Global Control  4", REG_GC04);
+	micrel_switch_print_reg(spi, " Global Control  5", REG_GC05);
+	micrel_switch_print_reg(spi, " Global Control  6", REG_GC06);
+	micrel_switch_print_reg(spi, " Global Control  7", REG_GC07);
+	micrel_switch_print_reg(spi, " Global Control  8", REG_GC08);
+	micrel_switch_print_reg(spi, " Global Control  9", REG_GC09);
+	micrel_switch_print_reg(spi, " Global Control 10", REG_GC10);
+	micrel_switch_print_reg(spi, " Global Control 11", REG_GC11);
+	micrel_switch_print_reg(spi, " Port 1 Status 1", REG_PSTAT1(1));
+	micrel_switch_print_reg(spi, " Port 1 Status 2", REG_PSTAT2(1));
+	micrel_switch_print_reg(spi, " Port 2 Status 1", REG_PSTAT1(2));
+	micrel_switch_print_reg(spi, " Port 2 Status 2", REG_PSTAT2(2));
+}
+
+static int micrel_switch_probe(struct device_d *dev)
+{
+	struct spi_device *spi = (struct spi_device *)dev->type_data;
+	int ret = 0;
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+
+	ret = micrel_switch_read_reg(spi, REG_ID0);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to read device id\n");
+		return ret;
+	}
+	if (ret != 0x95) {
+		dev_err(&spi->dev, "unknown device id: %02x\n", ret);
+		return -1;
+	}
+
+	dev_add_param(dev, "enable", micrel_switch_enable_set, NULL, 0);
+	dev_set_param(dev, "enable", "1");
+
+	return 0;
+}
+
+static struct driver_d micrel_switch_driver = {
+	.name  = "ksz8864rmn",
+	.probe = micrel_switch_probe,
+	.info  = micrel_switch_info,
+};
+
+static int micrel_switch_init(void)
+{
+	register_driver(&micrel_switch_driver);
+	return 0;
+}
+device_initcall(micrel_switch_init);
-- 
1.7.10


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

                 reply	other threads:[~2012-07-06  9:46 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1341567958-8543-1-git-send-email-jlu@pengutronix.de \
    --to=jlu@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox