mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jan Weitzel <j.weitzel@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC
Date: Wed, 18 Jul 2012 14:37:11 +0200	[thread overview]
Message-ID: <1342615033-3232-2-git-send-email-j.weitzel@phytec.de> (raw)
In-Reply-To: <1342615033-3232-1-git-send-email-j.weitzel@phytec.de>

GPMC could be already configured by xloader or rom bootloader
Use the configured buswidth (width == 0) or set it explicit in the board file.

Use autodetect on pcm049

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
---
 arch/arm/boards/pcm049/board.c         |    4 ++--
 arch/arm/mach-omap/devices-gpmc-nand.c |   23 ++++++++++++++++++-----
 arch/arm/mach-omap/gpmc.c              |   19 +++++++++++++++++++
 arch/arm/mach-omap/include/mach/gpmc.h |    8 ++++++++
 4 files changed, 47 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index 3a2b574..4f056e0 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -112,9 +112,9 @@ static int pcm049_devices_init(void)
 
 	pcm049_network_init();
 
-	gpmc_generic_nand_devices_init(0, 8,
+	/* Autodetect buswidth*/
+	gpmc_generic_nand_devices_init(0, 0,
 			OMAP_ECC_BCH8_CODE_HW, &omap4_nand_cfg);
-
 #ifdef CONFIG_PARTITION
 	devfs_add_partition("nand0", 0x00000, SZ_128K,
 			DEVFS_PARTITION_FIXED, "xload_raw");
diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
index cf87b57..06f9576 100644
--- a/arch/arm/mach-omap/devices-gpmc-nand.c
+++ b/arch/arm/mach-omap/devices-gpmc-nand.c
@@ -35,9 +35,7 @@
 #include <mach/silicon.h>
 #include <mach/gpmc.h>
 #include <mach/gpmc_nand.h>
-
-#define GPMC_CONF1_VALx8	0x00000800
-#define GPMC_CONF1_VALx16	0x00001800
+#include <mach/xload.h>
 
 /** NAND platform specific settings settings */
 static struct gpmc_nand_platform_data nand_plat = {
@@ -51,15 +49,30 @@ static struct gpmc_nand_platform_data nand_plat = {
  *
  * @return success/fail based on device function
  */
+
 int gpmc_generic_nand_devices_init(int cs, int width,
 		enum gpmc_ecc_mode eccmode, struct gpmc_config *nand_cfg)
 {
 	nand_plat.cs = cs;
 
+	if (width == 0) {
+		struct gpmc_config cfg;
+		/* try to get buswidth from gpmc */
+		gpmc_get_config(cs, &cfg);
+		width = (cfg.cfg[0] & GPMC_CONFIG1_DEVICETYPE_NAND) ? 16 : 8;
+
+		if (!(cfg.cfg[0] & GPMC_CONFIG1_DEVICETYPE_NAND))
+			debug("GPMC not configured for NAND, "
+					"try width %d bit\n", width);
+
+		debug("%s cfg0 %x width %d\n", __func__, cfg.cfg[0], width);
+	}
+
 	if (width == 16)
-		nand_cfg->cfg[0] = GPMC_CONF1_VALx16;
+		nand_cfg->cfg[0] = GPMC_CONFIG1_DEVICETYPE_NAND |
+					GPMC_CONFIG1_DEVICESIZE_16;
 	else
-		nand_cfg->cfg[0] = GPMC_CONF1_VALx8;
+		nand_cfg->cfg[0] = GPMC_CONFIG1_DEVICETYPE_NAND;
 
 	nand_plat.device_width = width;
 	nand_plat.ecc_mode = eccmode;
diff --git a/arch/arm/mach-omap/gpmc.c b/arch/arm/mach-omap/gpmc.c
index e8946d7..399f68a 100644
--- a/arch/arm/mach-omap/gpmc.c
+++ b/arch/arm/mach-omap/gpmc.c
@@ -115,3 +115,22 @@ void gpmc_cs_config(char cs, struct gpmc_config *config)
 	mdelay(1);		/* Settling time */
 }
 EXPORT_SYMBOL(gpmc_cs_config);
+
+void gpmc_get_config(char cs, struct gpmc_config *config)
+{
+	unsigned int reg = GPMC_REG(CONFIG1_0) + (cs * GPMC_CONFIG_CS_SIZE);
+	unsigned int cfg7;
+	unsigned char i;
+
+	/* Read the CFG1-6 regs */
+	for (i = 0; i < 6; i++) {
+		config->cfg[i] = readl(reg);
+		reg += GPMC_CONFIG_REG_OFF;
+	}
+
+	cfg7 = readl(reg);
+
+	config->size = (cfg7 >> 8) & 0xf;
+	config->base = (cfg7 & 0x3F) << 24;
+}
+EXPORT_SYMBOL(gpmc_get_config);
diff --git a/arch/arm/mach-omap/include/mach/gpmc.h b/arch/arm/mach-omap/include/mach/gpmc.h
index 3ddc5f5..84260fc 100644
--- a/arch/arm/mach-omap/include/mach/gpmc.h
+++ b/arch/arm/mach-omap/include/mach/gpmc.h
@@ -140,6 +140,11 @@
 
 #define NAND_WP_BIT		0x00000010
 
+#define GPMC_CONFIG1_DEVICESIZE(val)	((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16	GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)	((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NAND	GPMC_CONFIG1_DEVICETYPE(2)
+
 #ifndef __ASSEMBLY__
 
 /** Generic GPMC configuration structure to be used to configure a
@@ -157,6 +162,9 @@ void gpmc_generic_init(unsigned int cfg);
 /** Configuration for a specific chip select */
 void gpmc_cs_config(char cs, struct gpmc_config *config);
 
+/** Get Configuration for a specific chip select */
+void gpmc_get_config(char cs, struct gpmc_config *config);
+
 #endif
 
 #endif /* __ASM_ARCH_OMAP_GPMC_H */
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-07-18 12:37 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-18 12:37 [PATCH 0/3] omap gpmc nand autodetect Jan Weitzel
2012-07-18 12:37 ` Jan Weitzel [this message]
2012-07-18 22:11   ` [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC Sascha Hauer
2012-07-19  7:54     ` [PATCH 1/3 v2] " Jan Weitzel
2012-07-19  8:31     ` [PATCH 1/3] " Jan Weitzel
2012-07-19 13:09       ` Sascha Hauer
2012-07-18 12:37 ` [PATCH 2/3] gpmc: Add reset to gpmc_generic_init Jan Weitzel
2012-07-18 22:10   ` Sascha Hauer
2012-07-19  7:58     ` [PATCH 2/3 v2] " Jan Weitzel
2012-07-20  7:20       ` Sascha Hauer
2012-07-18 12:37 ` [RFC 3/3] mtd omap nand: reconfigure buswidth Jan Weitzel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1342615033-3232-2-git-send-email-j.weitzel@phytec.de \
    --to=j.weitzel@phytec.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox