[PATCH] Addd the Samsung S3C6410 SoC to Barebox

[PATCH] Addd the Samsung S3C6410 SoC to Barebox

[Juergen Beisert]

This patch series tries to add support for the Samsung's S3C6410 ARMv11 SoC
and with this main support also two popular platforms which are using this
SoC: FriendlyARM's Mini6410 and Tiny6410.

Comments are welcome.

If someone wants to try this series it can be found here
git://git.pengutronix.de/git/jbe/barebox.git, branch "master_s3c6410_inclusion"

Note: this series depends on the previously sent patch series
"ARM/Samsung: more clean up..."

Juergen


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/8] ARM/Samsung: add S3C6410 SoC iomap

[Juergen Beisert]

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/include/mach/s3c-iomap.h     |    3 ++
 arch/arm/mach-samsung/include/mach/s3c64xx-iomap.h |   51 ++++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm/mach-samsung/include/mach/s3c64xx-iomap.h

diff --git a/arch/arm/mach-samsung/include/mach/s3c-iomap.h b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
index d34ace4..09a6891 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-iomap.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-iomap.h
@@ -22,6 +22,9 @@
 #ifdef CONFIG_ARCH_S3C24xx
 # include <mach/s3c24xx-iomap.h>
 #endif
+#ifdef CONFIG_ARCH_S3C64xx
+# include <mach/s3c64xx-iomap.h>
+#endif
 #ifdef CONFIG_ARCH_S5PCxx
 # include <mach/s5pcxx-iomap.h>
 #endif
diff --git a/arch/arm/mach-samsung/include/mach/s3c64xx-iomap.h b/arch/arm/mach-samsung/include/mach/s3c64xx-iomap.h
new file mode 100644
index 0000000..9cc3a1b
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s3c64xx-iomap.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* S3C64xx device base addresses */
+#define S3C_SROM_SFR		0x70000000
+#define S3C_NAND_BASE		0x70200000
+#define S3C_SDI0_BASE		0x7c200000
+#define S3C_SDI0_SIZE		0x100
+#define S3C_SDI1_BASE		0x7c300000
+#define S3C_SDI1_SIZE		0x100
+#define S3C_SDI2_BASE		0x7c400000
+#define S3C_SDI2_SIZE		0x100
+#define S3C_DRAMC		0x7e001000
+#define S3C_WATCHDOG_BASE	0x7e004000
+#define S3C_CLOCK_POWER_BASE	0x7e00f000
+#define S3C_UART_BASE		0x7f005000
+#define S3C_TIMER_BASE		0x7f006000
+#define S3C_GPIO_BASE		0x7f008000
+
+#define S3C_UART1_BASE (S3C_UART_BASE)
+#define S3C_UART1_SIZE 0x400
+#define S3C_UART2_BASE (S3C_UART_BASE + 0x400)
+#define S3C_UART2_SIZE 0x400
+#define S3C_UART3_BASE (S3C_UART_BASE + 0x800)
+#define S3C_UART3_SIZE 0x400
+#define S3C_UART4_BASE (S3C_UART_BASE + 0xc00)
+#define S3C_UART4_SIZE 0x400
+
+#define S3C_SDRAM_BASE 0x50000000
+#define S3C_SDRAM_END (S3C_SDRAM_BASE + 0x10000000)
+
+#define S3C_SROM_BW (S3C_SROM_SFR)
+#define S3C_SROM_BC0 (S3C_SROM_SFR + 4)
+
+#define S3C_CS0_BASE 0x10000000
+#define S3C_CS1_BASE 0x18000000
+#define S3C_CS2_BASE 0x20000000
+#define S3C_CS3_BASE 0x28000000
+#define S3C_CS4_BASE 0x30000000
+#define S3C_CS5_BASE 0x38000000
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/8] ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC

[Juergen Beisert]

The S3C64XX SoC has a real 32 bit counter, but almost the same style of
registers. It's enough to change the parameters, to get the routines work on
this SoC.

TODO: what about the S5P SoCs?

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/s3c-timer.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-samsung/s3c-timer.c b/arch/arm/mach-samsung/s3c-timer.c
index 6665c8c..271f97d 100644
--- a/arch/arm/mach-samsung/s3c-timer.c
+++ b/arch/arm/mach-samsung/s3c-timer.c
@@ -37,11 +37,20 @@
 #define S3C_TCNTB4 (S3C_TIMER_BASE + 0x3c)
 #define S3C_TCNTO4 (S3C_TIMER_BASE + 0x40)
 
-#define TIMER_WIDTH 16
-#define TIMER_SHIFT 10
-#define PRE_MUX 3
-#define PRE_MUX_ADD 1
+#ifdef CONFIG_ARCH_S3C24xx
+# define TIMER_WIDTH 16
+# define TIMER_SHIFT 10
+# define PRE_MUX 3
+# define PRE_MUX_ADD 1
 static const uint32_t max = 0x0000ffff;
+#endif
+#ifdef CONFIG_ARCH_S3C64xx
+# define TIMER_WIDTH 32
+# define TIMER_SHIFT 10
+# define PRE_MUX 4
+# define PRE_MUX_ADD 0
+static const uint32_t max = ~0;
+#endif
 
 static void s3c_init_t4_clk_source(void)
 {
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/8] ARM/Samsung: add the clock tree support for the S3C6410 SoC

[Juergen Beisert]

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/Makefile                     |    1 +
 arch/arm/mach-samsung/clocks-s3c64xx.c             |  296 ++++++++++++++++++++
 arch/arm/mach-samsung/include/mach/s3c-clocks.h    |    3 +
 .../arm/mach-samsung/include/mach/s3c64xx-clocks.h |   58 ++++
 drivers/serial/serial_s3c.c                        |    3 +
 5 files changed, 361 insertions(+)
 create mode 100644 arch/arm/mach-samsung/clocks-s3c64xx.c
 create mode 100644 arch/arm/mach-samsung/include/mach/s3c64xx-clocks.h

diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 40180d7..807e91b 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -2,4 +2,5 @@ obj-y += s3c-timer.o generic.o
 obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
 obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o
 obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24xx.o mem-s3c24x0.o
+obj-$(CONFIG_ARCH_S3C64xx) += clocks-s3c64xx.o
 obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/clocks-s3c64xx.c b/arch/arm/mach-samsung/clocks-s3c64xx.c
new file mode 100644
index 0000000..a4beaf7
--- /dev/null
+++ b/arch/arm/mach-samsung/clocks-s3c64xx.c
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <asm-generic/div64.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+#include <mach/s3c-clocks.h>
+
+/*
+ * The main clock tree:
+ *
+ *  ref_in ----o-----------\
+ *             |            MUX -o------------\
+ *             |           / ^   |             MUX --- DIV_APLL ------- ARMCLK -> CPU core
+ *             o--- APLL --  |   |            / |
+ *             |             |   o--/2 -------  |
+ *             |       APLL_SEL  |              |<-MISC_CON_SYN667
+ *             |                 \              |
+ *             o-----------\      MUX-o-------\ |
+ *             |            MUX--/ ^  |        MUX --- DIV -o--------- HCLKx2 -> SDRAM (max. 266 MHz)
+ *             |           / ^     |  |       /             |
+ *             o---- MPLL--  |     |  o--/5 --              o-- DIV -- HCLK -> AXI / AHB (max. 133 MHz)
+ *             |             |     |                        |
+ *             |       MPLL_SEL  OTHERS_CLK_SELECT          o-- DIV -- PCLK -> APB (max. 66 MHz)
+ *             |
+ *             o-----------\
+ *             |            MUX---- to various hardware
+ *             |           / ^
+ *             o---- EPLL--  EPLL_SEL
+ *
+ */
+
+static unsigned s3c_get_apllclk(void)
+{
+	uint32_t m, p, s, reg_val;
+
+	if (!(readl(S3C_CLK_SRC) & S3C_CLK_SRC_FOUTAPLL))
+		return S3C64XX_CLOCK_REFERENCE;
+
+	reg_val = readl(S3C_APLLCON);
+	m = S3C_APLLCON_GET_MDIV(reg_val);
+	p = S3C_APLLCON_GET_PDIV(reg_val);
+	s = S3C_APLLCON_GET_SDIV(reg_val);
+
+	return (S3C64XX_CLOCK_REFERENCE * m) / (p << s);
+}
+
+uint32_t s3c_get_mpllclk(void)
+{
+	uint32_t m, p, s, reg_val;
+
+	if (!(readl(S3C_CLK_SRC) & S3C_CLK_SRC_FOUTMPLL))
+		return S3C64XX_CLOCK_REFERENCE;
+
+	reg_val = readl(S3C_MPLLCON);
+	m = S3C_MPLLCON_GET_MDIV(reg_val);
+	p = S3C_MPLLCON_GET_PDIV(reg_val);
+	s = S3C_MPLLCON_GET_SDIV(reg_val);
+
+	return (S3C64XX_CLOCK_REFERENCE * m) / (p << s);
+}
+
+unsigned s3c_get_epllclk(void)
+{
+	u32 m, p, s, k, reg0_val, reg1_val;
+	u64 tmp;
+
+	if (!(readl(S3C_CLK_SRC) & S3C_CLK_SRC_FOUTEPLL))
+		return S3C64XX_CLOCK_REFERENCE;
+
+	reg0_val = readl(S3C_EPLLCON0);
+	reg1_val = readl(S3C_EPLLCON1);
+	m = S3C_EPLLCON0_GET_MDIV(reg0_val);
+	p = S3C_EPLLCON0_GET_PDIV(reg0_val);
+	s = S3C_EPLLCON0_GET_SDIV(reg0_val);
+	k = S3C_EPLLCON1_GET_KDIV(reg1_val);
+
+	tmp = S3C64XX_CLOCK_REFERENCE;
+	tmp *= (m << 16) + k;
+	do_div(tmp, (p << s));
+
+	return (unsigned)tmp >> 16;
+}
+
+uint32_t s3c_get_fclk(void)
+{
+	unsigned clk;
+
+	clk = s3c_get_apllclk();
+	if (readl(S3C_MISC_CON) & S3C_MISC_CON_SYN667)
+		clk /= 2;
+
+	return clk / (S3C_CLK_DIV0_GET_ADIV(readl(S3C_CLK_DIV0)) + 1);
+}
+
+static unsigned s3c_get_hclk_in(void)
+{
+	unsigned clk;
+
+	if (readl(S3C_OTHERS) & S3C_OTHERS_CLK_SELECT)
+		clk = s3c_get_apllclk();
+	else
+		clk = s3c_get_mpllclk();
+
+	if (readl(S3C_MISC_CON) & S3C_MISC_CON_SYN667)
+		clk /= 5;
+
+	return clk;
+}
+
+static unsigned s3c_get_hclkx2(void)
+{
+	return s3c_get_hclk_in() /
+			(S3C_CLK_DIV0_GET_HCLK2(readl(S3C_CLK_DIV0)) + 1);
+}
+
+uint32_t s3c_get_hclk(void)
+{
+	return s3c_get_hclkx2() /
+			(S3C_CLK_DIV0_GET_HCLK(readl(S3C_CLK_DIV0)) + 1);
+}
+
+uint32_t s3c_get_pclk(void)
+{
+	return s3c_get_hclkx2() /
+			(S3C_CLK_DIV0_GET_PCLK(readl(S3C_CLK_DIV0)) + 1);
+}
+
+static void s3c_init_mpll_dout(void)
+{
+	unsigned reg;
+
+	/* keep it at the same frequency as HCLKx2 */
+	reg = readl(S3C_CLK_DIV0) | S3C_CLK_DIV0_SET_MPLL_DIV(1); /* e.g. / 2 */
+	writel(reg, S3C_CLK_DIV0);
+}
+
+/* configure and enable UCLK1 */
+static int s3c_init_uart_clock(void)
+{
+	unsigned reg;
+
+	s3c_init_mpll_dout();	/* to have a reliable clock source */
+
+	/* source the UART clock from the MPLL, currently *not* from EPLL */
+	reg = readl(S3C_CLK_SRC) | S3C_CLK_SRC_UARTMPLL;
+	writel(reg, S3C_CLK_SRC);
+
+	/* keep UART clock at the same frequency than the PCLK */
+	reg = readl(S3C_CLK_DIV2) & ~S3C_CLK_DIV2_UART_MASK;
+	reg |= S3C_CLK_DIV2_SET_UART(0x3);	/* / 4 */
+	writel(reg, S3C_CLK_DIV2);
+
+	/* ensure this very special clock is running */
+	reg = readl(S3C_SCLK_GATE) | S3C_SCLK_GATE_UART;
+	writel(reg, S3C_SCLK_GATE);
+
+	return 0;
+}
+core_initcall(s3c_init_uart_clock);
+
+/*
+ * The UART related clock path:
+ *
+ * PCLK --------------------------------------o-----0-\
+ * ???? -------------------------------UCLK0--|-----1--\MUX----- UART
+ * MPLL -----DIV0------\                      +-----2--/ ^
+ *                     MUX---DIV2------UCLK1--------3-/  UART setting (source)
+ * EPLL ---------------/
+ *                      ^SRC_UARTMPLL
+ */
+unsigned s3c_get_uart_clk(unsigned source)
+{
+	u32 reg;
+	unsigned clk, pdiv, uartpdiv;
+
+	switch (source) {
+	default: /* PCLK */
+		clk = s3c_get_pclk();
+		pdiv = uartpdiv = 1;
+		break;
+	case 1: /* UCLK0 */
+		clk = 0;
+		pdiv = uartpdiv = 1;	/* TODO */
+		break;
+	case 3: /* UCLK1 */
+		reg = readl(S3C_CLK_SRC);
+		if (reg & S3C_CLK_SRC_UARTMPLL) {
+			clk = s3c_get_mpllclk();
+			pdiv = S3C_CLK_DIV0_GET_MPLL_DIV(readl(S3C_CLK_DIV0)) + 1;
+		} else {
+			clk = s3c_get_epllclk();
+			pdiv = 1;
+		}
+		uartpdiv = S3C_CLK_DIV2_GET_UART(readl(S3C_CLK_DIV2)) + 1;
+		break;
+	}
+
+	return clk / pdiv / uartpdiv;
+}
+
+/*
+ * The MMC related clock path:
+ *
+ *             MMCx_SEL
+ *                |
+ * EPLLout --0-\  v
+ * MPLLout --1--\MUX----SCLK_MMCx----DIV_MMCx------>HSMMCx
+ * EPLLin  --2--/       on/off     / 1..16
+ * 27 MHz  --3-/
+ *
+ * The datasheet is not very precise here, so the schematic shown above was
+ * made by checking various bits in the SYSCON.
+ */
+unsigned s3c_get_hsmmc_clk(int id)
+{
+	u32 sel, div, sclk = readl(S3C_SCLK_GATE);
+	unsigned bclk;
+
+	if (!(sclk & S3C_SCLK_GATE_MMC(id)))
+		return 0; /* disabled */
+
+	sel = S3C_CLK_SRC_GET_MMC_SEL(id, readl(S3C_CLK_SRC));
+	switch (sel) {
+	case 0:
+		bclk = s3c_get_epllclk();
+		break;
+	case 1:
+		bclk = s3c_get_mpllclk();
+		break;
+	case 2:
+		bclk = S3C64XX_CLOCK_REFERENCE;
+		break;
+	case 3:
+		bclk = 27000000;
+		break;
+	}
+
+	div = S3C_CLK_DIV0_GET_MMC(id, readl(S3C_CLK_DIV0)) + 1;
+
+	return bclk / div;
+}
+
+void s3c_set_hsmmc_clk(int id, int src, unsigned div)
+{
+	u32 reg;
+
+	if (!div)
+		div = 1;
+
+	writel(readl(S3C_SCLK_GATE) & ~S3C_SCLK_GATE_MMC(id), S3C_SCLK_GATE);
+
+	/* select the new clock source */
+	reg = readl(S3C_CLK_SRC) & ~S3C_CLK_SRC_SET_MMC_SEL(id, ~0);
+	reg |= S3C_CLK_SRC_SET_MMC_SEL(id, src);
+	writel(reg, S3C_CLK_SRC);
+
+	/* select the new pre-divider */
+	reg = readl(S3C_CLK_DIV0) & ~ S3C_CLK_DIV0_SET_MMC(id, ~0);
+	reg |= S3C_CLK_DIV0_SET_MMC(id, div - 1);
+	writel(reg, S3C_CLK_DIV0);
+
+	/* calling this function implies enabling of the clock */
+	writel(readl(S3C_SCLK_GATE) | S3C_SCLK_GATE_MMC(id), S3C_SCLK_GATE);
+}
+
+int s3c64xx_dump_clocks(void)
+{
+	printf("refclk:  %7d kHz\n", S3C64XX_CLOCK_REFERENCE / 1000);
+	printf("apll:    %7d kHz\n", s3c_get_apllclk() / 1000);
+	printf("mpll:    %7d kHz\n", s3c_get_mpllclk() / 1000);
+	printf("epll:    %7d kHz\n", s3c_get_epllclk() / 1000);
+	printf("CPU:     %7d kHz\n", s3c_get_fclk() / 1000);
+	printf("hclkx2:  %7d kHz\n", s3c_get_hclkx2() / 1000);
+	printf("hclk:    %7d kHz\n", s3c_get_hclk() / 1000);
+	printf("pclk:    %7d kHz\n", s3c_get_pclk() / 1000);
+	return 0;
+}
+
+late_initcall(s3c64xx_dump_clocks);
diff --git a/arch/arm/mach-samsung/include/mach/s3c-clocks.h b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
index f577306..6920ca9 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-clocks.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-clocks.h
@@ -25,6 +25,9 @@
 #ifdef CONFIG_ARCH_S3C24xx
 # include <mach/s3c24xx-clocks.h>
 #endif
+#ifdef CONFIG_ARCH_S3C64xx
+# include <mach/s3c64xx-clocks.h>
+#endif
 #ifdef CONFIG_ARCH_S5PCxx
 # include <mach/s5pcxx-clocks.h>
 #endif
diff --git a/arch/arm/mach-samsung/include/mach/s3c64xx-clocks.h b/arch/arm/mach-samsung/include/mach/s3c64xx-clocks.h
new file mode 100644
index 0000000..9646705
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/s3c64xx-clocks.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define S3C_APLLCON (S3C_CLOCK_POWER_BASE + 0x0c)
+# define S3C_APLLCON_GET_MDIV(x) (((x) >> 16) & 0x3ff)
+# define S3C_APLLCON_GET_PDIV(x) (((x) >> 8) & 0x3f)
+# define S3C_APLLCON_GET_SDIV(x) ((x) & 0x7)
+#define S3C_MPLLCON (S3C_CLOCK_POWER_BASE + 0x10)
+# define S3C_MPLLCON_GET_MDIV(x) (((x) >> 16) & 0x3ff)
+# define S3C_MPLLCON_GET_PDIV(x) (((x) >> 8) & 0x3f)
+# define S3C_MPLLCON_GET_SDIV(x) ((x) & 0x7)
+#define S3C_EPLLCON0 (S3C_CLOCK_POWER_BASE + 0x14)
+# define S3C_EPLLCON0_GET_MDIV(x) (((x) >> 16) & 0x3ff)
+# define S3C_EPLLCON0_GET_PDIV(x) (((x) >> 8) & 0x3f)
+# define S3C_EPLLCON0_GET_SDIV(x) ((x) & 0x7)
+#define S3C_EPLLCON1 (S3C_CLOCK_POWER_BASE + 0x18)
+# define S3C_EPLLCON1_GET_KDIV(x) ((x) & 0xffff)
+#define S3C_CLKCON (S3C_CLOCK_POWER_BASE + 0xc)
+#define S3C_CLKSLOW (S3C_CLOCK_POWER_BASE + 0x10)
+#define S3C_CLKDIVN (S3C_CLOCK_POWER_BASE + 0x14)
+#define S3C_CLK_SRC (S3C_CLOCK_POWER_BASE + 0x01c)
+# define S3C_CLK_SRC_GET_MMC_SEL(x, v) (((v) >> (18 + (x * 2))) & 0x3)
+# define S3C_CLK_SRC_SET_MMC_SEL(x, v) (((v) & 0x3) << (18 + (x * 2)))
+# define S3C_CLK_SRC_UARTMPLL (1 << 13)
+# define S3C_CLK_SRC_FOUTEPLL (1 << 2)
+# define S3C_CLK_SRC_FOUTMPLL (1 << 1)
+# define S3C_CLK_SRC_FOUTAPLL (1 << 0)
+#define S3C_CLK_DIV0 (S3C_CLOCK_POWER_BASE + 0x020)
+# define S3C_CLK_DIV0_GET_ADIV(x) ((x) & 0xf)
+# define S3C_CLK_DIV0_GET_HCLK2(x) (((x) >> 9) & 0x7)
+# define S3C_CLK_DIV0_GET_HCLK(x) (((x) >> 8) & 0x1)
+# define S3C_CLK_DIV0_GET_PCLK(x) (((x) >> 12) & 0xf)
+# define S3C_CLK_DIV0_SET_MPLL_DIV(x) (((x) & 0x1) << 4)
+# define S3C_CLK_DIV0_GET_MPLL_DIV(x) (((x) >> 4) & 0x1)
+# define S3C_CLK_DIV0_GET_MMC(x, v) (((v) >> (4 * x)) & 0xf)
+# define S3C_CLK_DIV0_SET_MMC(x, v) (((v) & 0xf) << (4 * x))
+#define S3C_CLK_DIV2 (S3C_CLOCK_POWER_BASE + 0x028)
+# define S3C_CLK_DIV2_UART_MASK (0xf << 16)
+# define S3C_CLK_DIV2_SET_UART(x) ((x) << 16)
+# define S3C_CLK_DIV2_GET_UART(x) (((x) >> 16) & 0xf)
+#define S3C_SCLK_GATE (S3C_CLOCK_POWER_BASE + 0x038)
+# define S3C_SCLK_GATE_UART (1 << 5)
+# define S3C_SCLK_GATE_MMC(x) (1 << (24 + x))
+#define S3C_MISC_CON (S3C_CLOCK_POWER_BASE + 0x838)
+# define S3C_MISC_CON_SYN667 (1 << 19)
+#define S3C_OTHERS (S3C_CLOCK_POWER_BASE + 0x900)
+# define S3C_OTHERS_CLK_SELECT (1 << 6)
diff --git a/drivers/serial/serial_s3c.c b/drivers/serial/serial_s3c.c
index 53ac77f..0611f24 100644
--- a/drivers/serial/serial_s3c.c
+++ b/drivers/serial/serial_s3c.c
@@ -58,6 +58,9 @@ static unsigned s3c_select_arch_input_clock(void)
 	/* S3C24xx: 0=2=PCLK, 1=UEXTCLK, 3=FCLK/n */
 	if (IS_ENABLED(CONFIG_ARCH_S3C24xx))
 		return 0;	/* use the internal PCLK */
+	/* S3C64xx: 0=2=PCLK, 1=UCLK0, 3=UCLK1 */
+	if (IS_ENABLED(CONFIG_ARCH_S3C64xx))
+		return 3;	/* use the internal UCLK1 */
 	/* S5PCxx: 0=PCLK, 1=SCLK_UART */
 	if (IS_ENABLED(CONFIG_ARCH_S5PCxx))
 		return 0;	/* use the internal PCLK */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/8] ARM/Samsung: add GPIO handling support for the S3C6410 SoC

[Juergen Beisert]

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/Makefile                     |    2 +-
 arch/arm/mach-samsung/gpio-s3c64xx.c               |  301 +++++++++++
 arch/arm/mach-samsung/include/mach/gpio.h          |    3 +
 arch/arm/mach-samsung/include/mach/iomux-s3c64xx.h |  542 ++++++++++++++++++++
 4 files changed, 847 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-samsung/gpio-s3c64xx.c
 create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s3c64xx.h

diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 807e91b..9a2484f 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -2,5 +2,5 @@ obj-y += s3c-timer.o generic.o
 obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
 obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o
 obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24xx.o mem-s3c24x0.o
-obj-$(CONFIG_ARCH_S3C64xx) += clocks-s3c64xx.o
+obj-$(CONFIG_ARCH_S3C64xx) += gpio-s3c64xx.o clocks-s3c64xx.o
 obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/gpio-s3c64xx.c b/arch/arm/mach-samsung/gpio-s3c64xx.c
new file mode 100644
index 0000000..bb3ac52
--- /dev/null
+++ b/arch/arm/mach-samsung/gpio-s3c64xx.c
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This codes bases partially on code from the Linux kernel:
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <io.h>
+#include <gpio.h>
+#include <mach/s3c-iomap.h>
+
+#define S3C_GPACON (S3C_GPIO_BASE)
+#define S3C_GPADAT (S3C_GPIO_BASE + 0x04)
+#define S3C_GPAPUD (S3C_GPIO_BASE + 0x08)
+
+static const unsigned short group_offset[] = {
+	0x000,	/* GPA */ /* 8 pins, 4 bit each */
+	0x020,	/* GPB */ /* 7 pins, 4 bit each */
+	0x040,	/* GPC */ /* 8 pins, 4 bit each */
+	0x060,	/* GPD */ /* 5 pins, 4 bit each */
+	0x080,	/* GPE */ /* 5 pins, 4 bit each */
+	0x0a0,	/* GPF */ /* 16 pins, 2 bit each */
+	0x0c0,	/* GPG */ /* 7 pins, 4 bit each */
+	0x0e0,	/* GPH */ /* two registers, 8 + 2 pins, 4 bit each */
+	0x100,	/* GPI */ /* 16 pins, 2 bit each */
+	0x120,	/* GPJ */ /* 12 pins, 2 bit each */
+	0x800,	/* GPK */ /* two registers, 8 + 8 pins, 4 bit each */
+	0x810,	/* GPL */ /* two registers, 8 + 8 pins, 4 bit each */
+	0x820,	/* GPM */ /* 6 pins, 4 bit each */
+	0x830,	/* GPN */ /* 16 pins, 2 bit each */
+	0x140,	/* GPO */ /* 16 pins, 2 bit each */
+	0x160,	/* GPP */ /* 15 pins, 2 bit each */
+	0x180,	/* GPQ */ /* 9 pins, 2 bit each */
+};
+
+void gpio_set_value(unsigned gpio, int value)
+{
+	unsigned group = GET_GROUP(gpio);
+	unsigned bit = GET_BIT(gpio);
+	unsigned offset;
+	uint32_t reg;
+
+	offset = group_offset[group];
+
+	switch (group) {
+	case 7:		/* GPH */
+	case 10:	/* GPK */
+	case 11:	/* GPL */
+		offset += 4;
+		break;
+	}
+
+	reg = readl(S3C_GPADAT + offset);
+	reg &= ~(1 << bit);
+	reg |= (!!value) << bit;
+	writel(reg, S3C_GPADAT + offset);
+}
+
+int gpio_get_value(unsigned gpio)
+{
+	unsigned group = GET_GROUP(gpio);
+	unsigned bit = GET_BIT(gpio);
+	unsigned offset;
+	uint32_t reg;
+
+	offset = group_offset[group];
+
+	switch (group) {
+	case 7:		/* GPH */
+	case 10:	/* GPK */
+	case 11:	/* GPL */
+		offset += 4;
+		break;
+	}
+
+	/* value */
+	reg = readl(S3C_GPADAT + offset);
+
+	return !!(reg & (1 << bit));
+}
+
+static void gpio_direction_input_4b(unsigned offset, unsigned bit)
+{
+	uint32_t reg;
+
+	if (bit > 31) {
+		offset += 4;
+		bit -= 32;
+	}
+
+	reg = readl(S3C_GPACON + offset) & ~(0xf << bit);
+	writel(reg, S3C_GPACON + offset); /* b0000 means 'GPIO input' */
+}
+
+static void gpio_direction_input_2b(unsigned offset, unsigned bit)
+{
+	uint32_t reg;
+
+	reg = readl(S3C_GPACON + offset) & ~(0x3 << bit);
+	writel(reg, S3C_GPACON + offset); /* b00 means 'GPIO input' */
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned group = GET_GROUP(gpio);
+	unsigned bit = GET_BIT(gpio);
+	unsigned offset;
+
+	offset = group_offset[group];
+
+	switch (group) {
+	case 5:		/* GPF */
+	case 8:		/* GPI */
+	case 9:		/* GPJ */
+	case 13:	/* GPN */
+	case 14:	/* GPO */
+	case 15:	/* GPP */
+	case 16:	/* GPQ */
+		gpio_direction_input_2b(offset, bit << 1);
+		break;
+	default:
+		gpio_direction_input_4b(offset, bit << 2);
+	}
+
+	return 0;
+}
+
+static void gpio_direction_output_4b(unsigned offset, unsigned bit)
+{
+	uint32_t reg;
+
+	if (bit > 31) {
+		offset += 4;
+		bit -= 32;
+	}
+
+	reg = readl(S3C_GPACON + offset) & ~(0xf << bit);
+	reg |= 0x1 << bit;
+	writel(reg, S3C_GPACON + offset); /* b0001 means 'GPIO output' */
+}
+
+static void gpio_direction_output_2b(unsigned offset, unsigned bit)
+{
+	uint32_t reg;
+
+	/* direction */
+	reg = readl(S3C_GPACON + offset) & ~(0x3 << bit);
+	reg |= 0x1 << bit;
+	writel(reg, S3C_GPACON + offset);
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned group = GET_GROUP(gpio);
+	unsigned bit = GET_BIT(gpio);
+	unsigned offset;
+
+	gpio_set_value(gpio, value);
+
+	offset = group_offset[group];
+	switch (group) {
+	case 5:		/* GPF */
+	case 8:		/* GPI */
+	case 9:		/* GPJ */
+	case 13:	/* GPN */
+	case 14:	/* GPO */
+	case 15:	/* GPP */
+	case 16:	/* GPQ */
+		gpio_direction_output_2b(offset, bit << 1);
+		break;
+	default:
+		gpio_direction_output_4b(offset, bit << 2);
+	}
+
+	return 0;
+}
+
+/* one register, 2 bits per function -> GPF, GPI, GPJ, GPN, GPO, GPP, GPQ */
+static void s3c_d2pins(unsigned offset, unsigned pin_mode)
+{
+	unsigned bit = GET_BIT(pin_mode);
+	unsigned func = GET_FUNC(pin_mode);
+	unsigned reg;
+
+	if (PUD_PRESENT(pin_mode)) {
+		reg = readl(S3C_GPAPUD + offset);
+		reg &= ~(PUD_MASK << bit);
+		reg |= GET_PUD(pin_mode) << bit;
+		writel(reg, S3C_GPAPUD + offset);
+	}
+
+	/* in the case of pin's function is GPIO it also sets up the direction */
+	reg = readl(S3C_GPACON + offset) & ~(0x3 << bit);
+	writel(reg | (func << bit), S3C_GPACON + offset);
+
+	if (func == 1) { /* output? if yes, also set the initial value */
+		reg = readl(S3C_GPADAT + offset) & ~(1 << (bit >> 1));
+		reg |= GET_GPIOVAL(pin_mode) << (bit >> 1);
+		writel(reg, S3C_GPADAT + offset);
+	}
+}
+
+/* one register, 4 bits per function -> GPA, GPB, GPC, GPD, GPE, GPG, GPM */
+static void s3c_d4pins(unsigned offset, unsigned pin_mode)
+{
+	unsigned bit = GET_BIT(pin_mode);
+	unsigned func = GET_FUNC(pin_mode);
+	unsigned reg;
+
+	if (PUD_PRESENT(pin_mode)) {
+		reg = readl(S3C_GPAPUD + offset);
+		reg &= ~(PUD_MASK << (bit >> 1));
+		reg |= GET_PUD(pin_mode) << (bit >> 1);
+		writel(reg, S3C_GPAPUD + offset);
+	}
+
+	/* in the case of pin's function is GPIO it also sets up the direction */
+	reg = readl(S3C_GPACON + offset) & ~(0xf << bit);
+	writel(reg | (func << bit), S3C_GPACON + offset);
+
+	if (func == 1) { /* output? if yes, also set the initial value */
+		reg = readl(S3C_GPADAT + offset) & ~(1 << (bit >> 2));
+		reg |= GET_GPIOVAL(pin_mode) << (bit >> 2);
+		writel(reg, S3C_GPADAT + offset);
+	}
+}
+
+/* two registers, 4 bits per pin -> GPH, GPK, GPL */
+static void s3c_d42pins(unsigned offset, unsigned pin_mode)
+{
+	unsigned bit = GET_BIT(pin_mode);
+	unsigned func = GET_FUNC(pin_mode);
+	uint32_t reg;
+	unsigned reg_offs = 0;
+
+	if (PUD_PRESENT(pin_mode)) {
+		reg = readl(S3C_GPAPUD + 4 + offset);
+		reg &= ~(PUD_MASK << (bit >> 1));
+		reg |= GET_PUD(pin_mode) << (bit >> 1);
+		writel(reg, S3C_GPACON + 4 + offset);
+	}
+
+	if (bit > 31) {
+		reg_offs = 4;
+		bit -= 32;
+	}
+
+	/* in the case of pin's function is GPIO it also sets up the direction */
+	reg = readl(S3C_GPACON + offset + reg_offs) & ~(0xf << bit);
+	writel(reg | (func << bit), S3C_GPACON + offset + reg_offs);
+
+	if (func == 1) { /* output? if yes, also set the initial value */
+		reg = readl(S3C_GPADAT + 4 + offset) & ~(1 << (bit >> 2));
+		reg |= GET_GPIOVAL(pin_mode) << (bit >> 2);
+		writel(reg, S3C_GPADAT + 4 + offset);
+	}
+}
+
+/* 'gpio_mode' must be one of the 'GP?_*' macros */
+void s3c_gpio_mode(unsigned gpio_mode)
+{
+	unsigned group, offset;
+
+	group = GET_GROUP(gpio_mode);
+	offset = group_offset[group];
+
+	switch (group) {
+	case 5:		/* GPF */
+	case 8:		/* GPI */
+	case 9:		/* GPJ */
+	case 13:	/* GPN */
+	case 14:	/* GPO */
+	case 15:	/* GPP */
+	case 16:	/* GPQ */
+		s3c_d2pins(offset, gpio_mode);
+		break;
+	case 7:		/* GPH */
+	case 10:	/* GPK */
+	case 11:	/* GPL */
+		s3c_d42pins(offset, gpio_mode);
+		break;
+	default:
+		s3c_d4pins(offset, gpio_mode);
+	}
+}
diff --git a/arch/arm/mach-samsung/include/mach/gpio.h b/arch/arm/mach-samsung/include/mach/gpio.h
index 4d7d217..2b45695 100644
--- a/arch/arm/mach-samsung/include/mach/gpio.h
+++ b/arch/arm/mach-samsung/include/mach/gpio.h
@@ -16,6 +16,9 @@
 #ifdef CONFIG_ARCH_S3C24xx
 # include <mach/iomux-s3c24x0.h>
 #endif
+#ifdef CONFIG_ARCH_S3C64xx
+# include <mach/iomux-s3c64xx.h>
+#endif
 #ifdef CONFIG_ARCH_S5PCxx
 # include <mach/iomux-s5pcxx.h>
 #endif
diff --git a/arch/arm/mach-samsung/include/mach/iomux-s3c64xx.h b/arch/arm/mach-samsung/include/mach/iomux-s3c64xx.h
new file mode 100644
index 0000000..5d68b71
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/iomux-s3c64xx.h
@@ -0,0 +1,542 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_IOMUX_S3C64XX_H
+# define __MACH_IOMUX_S3C64XX_H
+
+/* 3322222222221111111111
+ * 10987654321098765432109876543210
+ *                           ^^^^^^_ Bit offset
+ *                      ^^^^^_______ Group Number
+ *                  ^^^^____________ Function
+ *                 ^________________ initial GPIO out value
+ *                ^_________________ Pull up/down feature present
+ *              ^^__________________ initial pull up/down setting
+ */
+
+#define PIN(group,bit) ((group << 6) + bit)
+#define FUNC(x) (((x) & 0xf) << 11)
+#define GET_FUNC(x) (((x) >> 11) & 0xf)
+#define GET_GROUP(x) (((x) >> 6) & 0x1f)
+#define GET_BIT(x) ((x) & 0x3f)
+#define GET_GPIOVAL(x) (!!((x) & (1 << 15)))
+#define GPIO_OUT (1 << 11)
+#define GPIO_IN (0 << 11)
+#define GPIO_VAL(x) ((!!(x)) << 15)
+#define PUD_MASK 0x3
+#define PUD (1 << 16)
+#define PUD_PRESENT(x) (!!((x) & (1 << 16)))
+#define DISABLE_PUD (0 << 17)
+#define ENABLE_PU (2 << 17)
+#define ENABLE_PD (1 << 17)
+#define GET_PUD(x) (((x) >> 17) & PUD_MASK)
+
+/*
+ * To have a chance for simple GPIO manipulation routines
+ * define the GPIO numbers with a real simple scheme.
+ *
+ * Keep in mind: The 'GPIO_2_NO' creates a value to be used with the real gpio
+ * routines and *not* for the multiplexer routines!
+ */
+#define GPIO_2_NO(x,y) (PIN(x,y))
+
+/*
+ * Group A: GPIO 0...7
+ * Used GPIO: 0...7
+ * These pins can also act as GPIO outputs
+ */
+#define GPA0		(PIN(0,0) | PUD)
+#define GPA0_GPIO	(GPA0 | FUNC(0))
+#define GPA0_RXD0	(GPA0 | FUNC(2))
+#define GPA1		(PIN(0,4) | PUD)
+#define GPA1_GPIO	(GPA1 | FUNC(0))
+#define GPA1_TXD0	(GPA1 | FUNC(2))
+#define GPA2		(PIN(0,8) | PUD)
+#define GPA2_GPIO	(GPA2 | FUNC(0))
+#define GPA2_NCTS0	(GPA2 | FUNC(2))
+#define GPA3		(PIN(0,12) | PUD)
+#define GPA3_GPIO	(GPA3 | FUNC(0))
+#define GPA3_NRTS0	(GPA3 | FUNC(2))
+#define GPA4		(PIN(0,16) | PUD)
+#define GPA4_GPIO	(GPA4 | FUNC(0))
+#define GPA4_RXD1	(GPA4 | FUNC(2))
+#define GPA5		(PIN(0,20) | PUD)
+#define GPA5_GPIO	(GPA5 | FUNC(0))
+#define GPA5_TXD1	(GPA5 | FUNC(2))
+#define GPA6		(PIN(0,24) | PUD)
+#define GPA6_GPIO	(GPA6 | FUNC(0))
+#define GPA6_NCTS1	(GPA6 | FUNC(2))
+#define GPA7		(PIN(0,28) | PUD)
+#define GPA7_GPIO	(GPA7 | FUNC(0))
+#define GPA7_NRTS1	(GPA7 | FUNC(2))
+
+/*
+ * Group B: GPIO 0...7
+ * Used GPIO: 8...15
+ * These pins can also act as GPIO outputs
+ */
+#define GPB0		(PIN(1,0) | PUD)
+#define GPB0_GPIO	(GPB0 | FUNC(0))
+#define GPB0_RXD2	(GPB0 | FUNC(2))
+#define GPB0_DMAREQ	(GPB0 | FUNC(3))
+#define GPB0_IRDA_RXD	(GPB0 | FUNC(4))
+#define GPB0_ADDR_CF0	(GPB0 | FUNC(5))
+#define GPB1		(PIN(1,4) | PUD)
+#define GPB1_GPIO	(GPB1 | FUNC(0))
+#define GPB1_TXD2	(GPB1 | FUNC(2))
+#define GPB1_DMAREQ	(GPB1 | FUNC(3))
+#define GPB1_IRDA_TXD	(GPB1 | FUNC(4))
+#define GPB1_ADDR_CF1	(GPB1 | FUNC(5))
+#define GPB2		(PIN(1,8) | PUD)
+#define GPB2_GPIO	(GPB2 | FUNC(0))
+#define GPB2_RXD3	(GPB2 | FUNC(2))
+#define GPB2_IRDA_RXD	(GPB2 | FUNC(3))
+#define GPB2_DMAREQ	(GPB2 | FUNC(4))
+#define GPB2_ADDR_CF2	(GPB2 | FUNC(5))
+#define GPB2_IIC1_SCL	(GPB2 | FUNC(6))
+#define GPB3		(PIN(1,12) | PUD)
+#define GPB3_GPIO	(GPB3 | FUNC(0))
+#define GPB3_TXD3	(GPB3 | FUNC(2))
+#define GPB3_IRDA_TXD	(GPB3 | FUNC(3))
+#define GPB3_DMAREQ	(GPB3 | FUNC(4))
+#define GPB3_IIC1_SDA	(GPB3 | FUNC(6))
+#define GPB4		(PIN(1,16) | PUD)
+#define GPB4_GPIO	(GPB4 | FUNC(0))
+#define GPB4_SDBW	(GPB4 | FUNC(2))
+#define GPB4_CAM_FLD	(GPB4 | FUNC(3))
+#define GPB4_CF_DIR	(GPB4 | FUNC(4))
+#define GPB5		(PIN(1,20) | PUD)
+#define GPB5_GPIO	(GPB5 | FUNC(0))
+#define GPB5_IIC0_SCL	(GPB5 | FUNC(2))
+#define GPB6		(PIN(1,24) | PUD)
+#define GPB6_GPIO	(GPB6 | FUNC(0))
+#define GPB6_IIC0_SDA	(GPB6 | FUNC(2))
+
+#define GPC0		(PIN(2,0) | PUD)
+#define GPC0_GPIO	(GPC0 | FUNC(0))
+#define GPC0_SPI0_MISO	(GPC0 | FUNC(2))
+#define GPC1		(PIN(2,4) | PUD)
+#define GPC1_GPIO	(GPC1 | FUNC(0))
+#define GPC1_SPI0_CLK	(GPC1 | FUNC(2))
+#define GPC2		(PIN(2,8) | PUD)
+#define GPC2_GPIO	(GPC2 | FUNC(0))
+#define GPC2_SPI0_MOSI	(GPC2 | FUNC(2))
+#define GPC3		(PIN(2,12) | PUD)
+#define GPC3_GPIO	(GPC3 | FUNC(0))
+#define GPC3_SPI0_NCS	(GPC3 | FUNC(2))
+#define GPC4		(PIN(2,16) | PUD)
+#define GPC4_GPIO	(GPC4 | FUNC(0))
+#define GPC4_SPI1_MISO	(GPC4 | FUNC(2))
+#define GPC5		(PIN(2,20) | PUD)
+#define GPC5_GPIO	(GPC5 | FUNC(0))
+#define GPC5_SPI1_CLK	(GPC5 | FUNC(2))
+#define GPC6		(PIN(2,24) | PUD)
+#define GPC6_GPIO	(GPC6 | FUNC(0))
+#define GPC6_SPI1_MOSI	(GPC6 | FUNC(2))
+#define GPC7		(PIN(2,28) | PUD)
+#define GPC7_GPIO	(GPC7 | FUNC(0))
+#define GPC7_SPI1_NCS	(GPC7 | FUNC(2))
+
+#define GPD0		(PIN(3,0) | PUD)
+#define GPD0_AC97_BITCLK (GPD0 | FUNC(4))
+#define GPD1		(PIN(3,4) | PUD)
+#define GPD1_AC97_NRST	(GPD1 | FUNC(4))
+#define GPD2		(PIN(3,8) | PUD)
+#define GPD2_AC97_SYNC	(GPD2 | FUNC(4))
+#define GPD3		(PIN(3,12) | PUD)
+#define GPD3_AC97_SDI	(GPD3 | FUNC(4))
+#define GPD4		(PIN(3,16) | PUD)
+#define GPD4_AC97_SDO	(GPD4 | FUNC(4))
+
+#define GPE0		(PIN(4,0) | PUD)
+#define GPE0_GPIO	(GPE0 | FUNC(0))
+#define GPE1		(PIN(4,4) | PUD)
+#define GPE1_GPIO	(GPE1 | FUNC(0))
+#define GPE2		(PIN(4,8) | PUD)
+#define GPE2_GPIO	(GPE2 | FUNC(0))
+#define GPE3		(PIN(4,12) | PUD)
+#define GPE3_GPIO	(GPE3 | FUNC(0))
+#define GPE4		(PIN(4,16) | PUD)
+#define GPE4_GPIO	(GPE4 | FUNC(0))
+
+#define GPF0		(PIN(5,0) | PUD)
+#define GPF0_GPIO	(GPF0 | FUNC(0))
+#define GPF1		(PIN(5,2) | PUD)
+#define GPF1_GPIO	(GPF1 | FUNC(0))
+#define GPF2		(PIN(5,4) | PUD)
+#define GPF2_GPIO	(GPF2 | FUNC(0))
+#define GPF3		(PIN(5,6) | PUD)
+#define GPF3_GPIO	(GPF3 | FUNC(0))
+#define GPF4		(PIN(5,8) | PUD)
+#define GPF4_GPIO	(GPF4 | FUNC(0))
+#define GPF5		(PIN(5,10) | PUD)
+#define GPF5_GPIO	(GPF5 | FUNC(0))
+#define GPF6		(PIN(5,12) | PUD)
+#define GPF6_GPIO	(GPF6 | FUNC(0))
+#define GPF7		(PIN(5,14) | PUD)
+#define GPF7_GPIO	(GPF7 | FUNC(0))
+#define GPF8		(PIN(5,16) | PUD)
+#define GPF8_GPIO	(GPF8 | FUNC(0))
+#define GPF9		(PIN(5,18) | PUD)
+#define GPF9_GPIO	(GPF9 | FUNC(0))
+#define GPF10		(PIN(5,20) | PUD)
+#define GPF10_GPIO	(GPF10 | FUNC(0))
+#define GPF11		(PIN(5,22) | PUD)
+#define GPF11_GPIO	(GPF11 | FUNC(0))
+#define GPF12		(PIN(5,24) | PUD)
+#define GPF12_GPIO	(GPF12 | FUNC(0))
+#define GPF13		(PIN(5,26) | PUD)
+#define GPF13_GPIO	(GPF13 | FUNC(0))
+#define GPF14		(PIN(5,28) | PUD)
+#define GPF14_GPIO	(GPF14 | FUNC(0))
+#define GPF14_PWM0	(GPF14 | FUNC(2))
+#define GPF14_CLKOUT	(GPF14 | FUNC(3))
+#define GPF15		(PIN(5,30) | PUD)
+#define GPF15_GPIO	(GPF15 | FUNC(0))
+#define GPF15_PWM1	(GPF15 | FUNC(2))
+
+#define GPG0		(PIN(6,0) | PUD)
+#define GPG0_MMC0_CLK	(GPG0 | FUNC(2))
+#define GPG1		(PIN(6,4) | PUD)
+#define GPG1_MMC0_CMD	(GPG1 | FUNC(2))
+#define GPG2		(PIN(6,8) | PUD)
+#define GPG2_MMC0_DAT0	(GPG2 | FUNC(2))
+#define GPG3		(PIN(6,12) | PUD)
+#define GPG3_MMC0_DAT1	(GPG3 | FUNC(2))
+#define GPG4		(PIN(6,16) | PUD)
+#define GPG4_MMC0_DAT2	(GPG4 | FUNC(2))
+#define GPG5		(PIN(6,20) | PUD)
+#define GPG5_MMC0_DAT3	(GPG5 | FUNC(2))
+#define GPG6		(PIN(6,24) | PUD)
+#define GPG6_MMC0_NCD	(GPG6 | FUNC(2))
+
+#define GPH0		(PIN(7,0) | PUD)
+#define GPH0_GPIO	(GPH0 | FUNC(0))
+#define GPH1		(PIN(7,4) | PUD)
+#define GPH1_GPIO	(GPH1 | FUNC(0))
+#define GPH2		(PIN(7,8) | PUD)
+#define GPH2_GPIO	(GPH2 | FUNC(0))
+#define GPH3		(PIN(7,12) | PUD)
+#define GPH3_GPIO	(GPH3 | FUNC(0))
+#define GPH4		(PIN(7,16) | PUD)
+#define GPH4_GPIO	(GPH4 | FUNC(0))
+#define GPH5		(PIN(7,20) | PUD)
+#define GPH5_GPIO	(GPH5 | FUNC(0))
+#define GPH6		(PIN(7,24) | PUD)
+#define GPH6_GPIO	(GPH6 | FUNC(0))
+#define GPH7		(PIN(7,28) | PUD)
+#define GPH7_GPIO	(GPH7 | FUNC(0))
+#define GPH8		(PIN(7,32) | PUD)
+#define GPH8_GPIO	(GPH8 | FUNC(0))
+#define GPH9		(PIN(7,36) | PUD)
+#define GPH9_GPIO	(GPH9 | FUNC(0))
+
+#define GPI0		(PIN(8,0) | PUD)
+#define GPI0_GPIO	(GPI0 | FUNC(0))
+#define GPI1		(PIN(8,2) | PUD)
+#define GPI1_GPIO	(GPI1 | FUNC(0))
+#define GPI2		(PIN(8,4) | PUD)
+#define GPI2_GPIO	(GPI2 | FUNC(0))
+#define GPI3		(PIN(8,6) | PUD)
+#define GPI3_GPIO	(GPI3 | FUNC(0))
+#define GPI4		(PIN(8,8) | PUD)
+#define GPI4_GPIO	(GPI4 | FUNC(0))
+#define GPI5		(PIN(8,10) | PUD)
+#define GPI5_GPIO	(GPI5 | FUNC(0))
+#define GPI6		(PIN(8,12) | PUD)
+#define GPI6_GPIO	(GPI6 | FUNC(0))
+#define GPI7		(PIN(8,14) | PUD)
+#define GPI7_GPIO	(GPI7 | FUNC(0))
+#define GPI8		(PIN(8,16) | PUD)
+#define GPI8_GPIO	(GPI8 | FUNC(0))
+#define GPI9		(PIN(8,18) | PUD)
+#define GPI9_GPIO	(GPI9 | FUNC(0))
+#define GPI10		(PIN(8,20) | PUD)
+#define GPI10_GPIO	(GPI10 | FUNC(0))
+#define GPI11		(PIN(8,22) | PUD)
+#define GPI11_GPIO	(GPI11 | FUNC(0))
+#define GPI12		(PIN(8,24) | PUD)
+#define GPI12_GPIO	(GPI12 | FUNC(0))
+#define GPI13		(PIN(8,26) | PUD)
+#define GPI13_GPIO	(GPI13 | FUNC(0))
+#define GPI14		(PIN(8,28) | PUD)
+#define GPI14_GPIO	(GPI14 | FUNC(0))
+#define GPI15		(PIN(8,30) | PUD)
+#define GPI15_GPIO	(GPI15 | FUNC(0))
+
+#define GPJ0		(PIN(9,0) | PUD)
+#define GPJ0_GPIO	(GPJ0 | FUNC(0))
+#define GPJ1		(PIN(9,2) | PUD)
+#define GPJ1_GPIO	(GPJ1 | FUNC(0))
+#define GPJ2		(PIN(9,4) | PUD)
+#define GPJ2_GPIO	(GPJ2 | FUNC(0))
+#define GPJ3		(PIN(9,6) | PUD)
+#define GPJ3_GPIO	(GPJ3 | FUNC(0))
+#define GPJ4		(PIN(9,8) | PUD)
+#define GPJ4_GPIO	(GPJ4 | FUNC(0))
+#define GPJ5		(PIN(9,10) | PUD)
+#define GPJ5_GPIO	(GPJ5 | FUNC(0))
+#define GPJ6		(PIN(9,12) | PUD)
+#define GPJ6_GPIO	(GPJ6 | FUNC(0))
+#define GPJ7		(PIN(9,14) | PUD)
+#define GPJ7_GPIO	(GPJ7 | FUNC(0))
+#define GPJ8		(PIN(9,16) | PUD)
+#define GPJ8_GPIO	(GPJ8 | FUNC(0))
+#define GPJ9		(PIN(9,18) | PUD)
+#define GPJ9_GPIO	(GPJ9 | FUNC(0))
+#define GPJ10		(PIN(9,20) | PUD)
+#define GPJ10_GPIO	(GPJ10 | FUNC(0))
+#define GPJ11		(PIN(9,22) | PUD)
+#define GPJ11_GPIO	(GPJ11 | FUNC(0))
+
+#define GPK0		(PIN(10,0) | PUD)
+#define GPK0_DATA0	(GPK0 | FUNC(2))
+#define GPK0_GPIO	(GPK0 | FUNC(0))
+#define GPK1		(PIN(10,4) | PUD)
+#define GPK1_DATA1	(GPK1 | FUNC(2))
+#define GPK1_GPIO	(GPK1 | FUNC(0))
+#define GPK2		(PIN(10,8) | PUD)
+#define GPK2_DATA2	(GPK2 | FUNC(2))
+#define GPK2_GPIO	(GPK2 | FUNC(0))
+#define GPK3		(PIN(10,12) | PUD)
+#define GPK3_DATA3	(GPK3 | FUNC(2))
+#define GPK3_GPIO	(GPK3 | FUNC(0))
+#define GPK4		(PIN(10,16) | PUD)
+#define GPK4_DATA4	(GPK4 | FUNC(2))
+#define GPK4_GPIO	(GPK4 | FUNC(0))
+#define GPK5		(PIN(10,20) | PUD)
+#define GPK5_DATA5	(GPK5 | FUNC(2))
+#define GPK5_GPIO	(GPK5 | FUNC(0))
+#define GPK6		(PIN(10,24) | PUD)
+#define GPK6_DATA6	(GPK6 | FUNC(2))
+#define GPK6_GPIO	(GPK6 | FUNC(0))
+#define GPK7		(PIN(10,28) | PUD)
+#define GPK7_DATA7	(GPK7 | FUNC(2))
+#define GPK7_GPIO	(GPK7 | FUNC(0))
+#define GPK8		(PIN(10,32) | PUD)
+#define GPK8_DATA8	(GPK8 | FUNC(2))
+#define GPK8_GPIO	(GPK8 | FUNC(0))
+#define GPK9		(PIN(10,36) | PUD)
+#define GPK9_DATA9	(GPK9 | FUNC(2))
+#define GPK9_GPIO	(GPK9 | FUNC(0))
+#define GPK10		(PIN(10,40) | PUD)
+#define GPK10_DATA10	(GPK10 | FUNC(2))
+#define GPK10_GPIO	(GPK10 | FUNC(0))
+#define GPK11		(PIN(10,44) | PUD)
+#define GPK11_DATA11	(GPK11 | FUNC(2))
+#define GPK11_GPIO	(GPK11 | FUNC(0))
+#define GPK12		(PIN(10,48) | PUD)
+#define GPK12_DATA12	(GPK12 | FUNC(2))
+#define GPK12_GPIO	(GPK12 | FUNC(0))
+#define GPK13		(PIN(10,52) | PUD)
+#define GPK13_DATA13	(GPK13 | FUNC(2))
+#define GPK13_GPIO	(GPK13 | FUNC(0))
+#define GPK14		(PIN(10,56) | PUD)
+#define GPK14_DATA14	(GPK14 | FUNC(2))
+#define GPK14_GPIO	(GPK14 | FUNC(0))
+#define GPK15		(PIN(10,60) | PUD)
+#define GPK15_DATA15	(GPK15 | FUNC(2))
+#define GPK15_GPIO	(GPK15 | FUNC(0))
+
+#define GPL0		(PIN(11,0) | PUD)
+#define GPL0_ADDR0	(GPL0 | FUNC(2))
+#define GPL0_GPIO	(GPL0 | FUNC(0))
+#define GPL1		(PIN(11,4) | PUD)
+#define GPL1_ADDR1	(GPL1 | FUNC(2))
+#define GPL1_GPIO	(GPL1 | FUNC(0))
+#define GPL2		(PIN(11,8) | PUD)
+#define GPL2_ADDR2	(GPL2 | FUNC(2))
+#define GPL2_GPIO	(GPL2 | FUNC(0))
+#define GPL3		(PIN(11,12) | PUD)
+#define GPL3_ADDR3	(GPL3 | FUNC(2))
+#define GPL3_GPIO	(GPL3 | FUNC(0))
+#define GPL4		(PIN(11,16) | PUD)
+#define GPL4_ADDR3	(GPL4 | FUNC(2))
+#define GPL4_GPIO	(GPL4 | FUNC(0))
+#define GPL5		(PIN(11,20) | PUD)
+#define GPL5_ADDR3	(GPL5 | FUNC(2))
+#define GPL5_GPIO	(GPL5 | FUNC(0))
+#define GPL6		(PIN(11,24) | PUD)
+#define GPL6_ADDR3	(GPL6 | FUNC(2))
+#define GPL6_GPIO	(GPL6 | FUNC(0))
+#define GPL7		(PIN(11,28) | PUD)
+#define GPL7_ADDR3	(GPL7 | FUNC(2))
+#define GPL7_GPIO	(GPL7 | FUNC(0))
+#define GPL8		(PIN(11,32) | PUD)
+#define GPL8_ADDR3	(GPL8 | FUNC(2))
+#define GPL8_GPIO	(GPL8 | FUNC(0))
+#define GPL9		(PIN(11,36) | PUD)
+#define GPL9_ADDR3	(GPL9 | FUNC(2))
+#define GPL9_GPIO	(GPL9 | FUNC(0))
+#define GPL10		(PIN(11,40) | PUD)
+#define GPL10_ADDR3	(GPL10 | FUNC(2))
+#define GPL10_GPIO	(GPL10 | FUNC(0))
+#define GPL11		(PIN(11,44) | PUD)
+#define GPL11_ADDR3	(GPL11 | FUNC(2))
+#define GPL11_GPIO	(GPL11 | FUNC(0))
+#define GPL12		(PIN(11,48) | PUD)
+#define GPL12_ADDR3	(GPL12 | FUNC(2))
+#define GPL12_GPIO	(GPL12 | FUNC(0))
+#define GPL13		(PIN(11,52) | PUD)
+#define GPL13_ADDR16	(GPL13 | FUNC(2))
+#define GPL13_GPIO	(GPL13 | FUNC(0))
+#define GPL14		(PIN(11,65) | PUD)
+#define GPL14_ADDR17	(GPL14 | FUNC(2))
+#define GPL14_GPIO	(GPL14 | FUNC(0))
+
+#define GPM0		(PIN(12,0) | PUD)
+#define GPM0_GPIO	(GPM0 | FUNC(0))
+#define GPM1		(PIN(12,4) | PUD)
+#define GPM1_GPIO	(GPM1 | FUNC(0))
+#define GPM2		(PIN(12,8) | PUD)
+#define GPM2_GPIO	(GPM2 | FUNC(0))
+#define GPM3		(PIN(12,12) | PUD)
+#define GPM3_GPIO	(GPM3 | FUNC(0))
+#define GPM4		(PIN(12,16) | PUD)
+#define GPM4_GPIO	(GPM4 | FUNC(0))
+#define GPM5		(PIN(12,20) | PUD)
+#define GPM5_GPIO	(GPM5 | FUNC(0))
+
+#define GPN0		(PIN(13,0) | PUD)
+#define GPN0_GPIO	(GPN0 | FUNC(0))
+#define GPN1		(PIN(13,0) | PUD)
+#define GPN1_GPIO	(GPN1 | FUNC(0))
+#define GPN2		(PIN(13,0) | PUD)
+#define GPN2_GPIO	(GPN2 | FUNC(0))
+#define GPN3		(PIN(13,0) | PUD)
+#define GPN3_GPIO	(GPN3 | FUNC(0))
+#define GPN4		(PIN(13,0) | PUD)
+#define GPN4_GPIO	(GPN4 | FUNC(0))
+#define GPN5		(PIN(13,0) | PUD)
+#define GPN5_GPIO	(GPN5 | FUNC(0))
+#define GPN6		(PIN(13,0) | PUD)
+#define GPN6_GPIO	(GPN6 | FUNC(0))
+#define GPN7		(PIN(13,0) | PUD)
+#define GPN7_GPIO	(GPN7 | FUNC(0))
+#define GPN8		(PIN(13,0) | PUD)
+#define GPN8_GPIO	(GPN8 | FUNC(0))
+#define GPN9		(PIN(13,0) | PUD)
+#define GPN9_GPIO	(GPN9 | FUNC(0))
+#define GPN10		(PIN(13,20) | PUD)
+#define GPN10_GPIO	(GPN10 | FUNC(0))
+#define GPN11		(PIN(13,20) | PUD)
+#define GPN11_GPIO	(GPN11 | FUNC(0))
+#define GPN12		(PIN(13,20) | PUD)
+#define GPN12_GPIO	(GPN12 | FUNC(0))
+#define GPN13		(PIN(13,20) | PUD)
+#define GPN13_GPIO	(GPN13 | FUNC(0))
+#define GPN14		(PIN(13,20) | PUD)
+#define GPN14_GPIO	(GPN14 | FUNC(0))
+#define GPN15		(PIN(13,20) | PUD)
+#define GPN15_GPIO	(GPN15 | FUNC(0))
+
+#define GPO0		(PIN(14,0) | PUD)
+#define GPO0_GPIO	(GPO0 | FUNC(0))
+#define GPO0_NCS2	(GPO0 | FUNC(2))
+#define GPO1		(PIN(14,2) | PUD)
+#define GPO1_GPIO	(GPO1 | FUNC(0))
+#define GPO1_NCS3	(GPO1 | FUNC(2))
+#define GPO2		(PIN(14,4) | PUD)
+#define GPO2_GPIO	(GPO2 | FUNC(0))
+#define GPO2_NCS4	(GPO2 | FUNC(2))
+#define GPO3		(PIN(14,6) | PUD)
+#define GPO3_GPIO	(GPO3 | FUNC(0))
+#define GPO3_NCS5	(GPO3 | FUNC(2))
+#define GPO4		(PIN(14,8) | PUD)
+#define GPO4_GPIO	(GPO4 | FUNC(0))
+#define GPO5		(PIN(14,10) | PUD)
+#define GPO5_GPIO	(GPO5 | FUNC(0))
+#define GPO6		(PIN(14,12) | PUD)
+#define GPO6_GPIO	(GPO6 | FUNC(0))
+#define GPO6_ADDR6	(GPO6 | FUNC(2))
+#define GPO7		(PIN(14,14) | PUD)
+#define GPO7_GPIO	(GPO7 | FUNC(0))
+#define GPO7_ADDR7	(GPO7 | FUNC(2))
+#define GPO8		(PIN(14,16) | PUD)
+#define GPO8_GPIO	(GPO8 | FUNC(0))
+#define GPO8_ADDR8	(GPO8 | FUNC(2))
+#define GPO9		(PIN(14,18) | PUD)
+#define GPO9_GPIO	(GPO9 | FUNC(0))
+#define GPO9_ADDR9	(GPO9 | FUNC(2))
+#define GPO10		(PIN(14,20) | PUD)
+#define GPO10_GPIO	(GPO10 | FUNC(2))
+#define GPO10_ADDR10	(GPO10 | FUNC(2))
+#define GPO11		(PIN(14,22) | PUD)
+#define GPO11_GPIO	(GPO11 | FUNC(0))
+#define GPO11_ADDR11	(GPO11 | FUNC(2))
+#define GPO12		(PIN(14,24) | PUD)
+#define GPO12_GPIO	(GPO12 | FUNC(0))
+#define GPO12_ADDR12	(GPO12 | FUNC(2))
+#define GPO13		(PIN(14,26) | PUD)
+#define GPO13_GPIO	(GPO13 | FUNC(0))
+#define GPO13_ADDR13	(GPO13 | FUNC(2))
+#define GPO14		(PIN(14,28) | PUD)
+#define GPO14_GPIO	(GPO14 | FUNC(0))
+#define GPO14_ADDR14	(GPO14 | FUNC(2))
+#define GPO15		(PIN(14,30) | PUD)
+#define GPO15_GPIO	(GPO15 | FUNC(0))
+#define GPO15_ADDR15	(GPO15 | FUNC(2))
+
+#define GPP0		(PIN(15,0) | PUD)
+#define GPP0_GPIO	(GPP0 | FUNC(0))
+#define GPP1		(PIN(15,2) | PUD)
+#define GPP1_GPIO	(GPP1 | FUNC(0))
+#define GPP2		(PIN(15,4) | PUD)
+#define GPP2_NWAIT	(GPP2 | FUNC(2))
+#define GPP3		(PIN(15,6) | PUD)
+#define GPP3_FALE	(GPP3 | FUNC(2))
+#define GPP4		(PIN(15,8) | PUD)
+#define GPP4_FCLE	(GPP4 | FUNC(2))
+#define GPP5		(PIN(15,10) | PUD)
+#define GPP5_FWE	(GPP5 | FUNC(2))
+#define GPP6		(PIN(15,12) | PUD)
+#define GPP6_FRE	(GPP6 | FUNC(2))
+#define GPP7		(PIN(15,14) | PUD)
+#define GPP7_RNB	(GPP7 | FUNC(2))
+#define GPP8		(PIN(15,16) | PUD)
+#define GPP8_GPIO	(GPP8 | FUNC(0))
+#define GPP9		(PIN(15,18) | PUD)
+#define GPP9_GPIO	(GPP9 | FUNC(0))
+#define GPP10		(PIN(15,20) | PUD)
+#define GPP10_GPIO	(GPP10 | FUNC(0))
+#define GPP11		(PIN(15,22) | PUD)
+#define GPP11_GPIO	(GPP11 | FUNC(0))
+#define GPP12		(PIN(15,24) | PUD)
+#define GPP12_GPIO	(GPP12 | FUNC(0))
+#define GPP13		(PIN(15,26) | PUD)
+#define GPP13_GPIO	(GPP13 | FUNC(0))
+#define GPP14		(PIN(15,28) | PUD)
+#define GPP14_GPIO	(GPP14 | FUNC(0))
+
+#define GPQ0		(PIN(16,0) | PUD)
+#define GPQ0_GPIO	(GPQ0 | FUNC(0))
+#define GPQ1		(PIN(16,2) | PUD)
+#define GPQ1_GPIO	(GPQ1 | FUNC(0))
+#define GPQ2		(PIN(16,4) | PUD)
+#define GPQ2_GPIO	(GPQ2 | FUNC(0))
+#define GPQ3		(PIN(16,8) | PUD)
+#define GPQ3_GPIO	(GPQ3 | FUNC(0))
+#define GPQ4		(PIN(16,8) | PUD)
+#define GPQ4_GPIO	(GPQ4 | FUNC(0))
+#define GPQ5		(PIN(16,10) | PUD)
+#define GPQ5_GPIO	(GPQ5 | FUNC(0))
+#define GPQ6		(PIN(16,12) | PUD)
+#define GPQ6_GPIO	(GPQ6 | FUNC(0))
+#define GPQ7		(PIN(16,14) | PUD)
+#define GPQ7_GPIO	(GPQ7 | FUNC(0))
+#define GPQ8		(PIN(16,16) | PUD)
+#define GPQ8_GPIO	(GPQ7 | FUNC(0))
+
+
+#endif /* __MACH_IOMUX_S3C64XX_H */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 5/8] ARM/Samsung: add generic S3C6410 SoC specific functions

[Juergen Beisert]

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/mach-samsung/Makefile                     |    2 +-
 .../mach-samsung/include/mach/devices-s3c64xx.h    |   40 ++++++++++++
 arch/arm/mach-samsung/include/mach/s3c-generic.h   |   16 +++++
 arch/arm/mach-samsung/mem-s3c64xx.c                |   66 ++++++++++++++++++++
 4 files changed, 123 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-samsung/include/mach/devices-s3c64xx.h
 create mode 100644 arch/arm/mach-samsung/mem-s3c64xx.c

diff --git a/arch/arm/mach-samsung/Makefile b/arch/arm/mach-samsung/Makefile
index 9a2484f..42a6708 100644
--- a/arch/arm/mach-samsung/Makefile
+++ b/arch/arm/mach-samsung/Makefile
@@ -2,5 +2,5 @@ obj-y += s3c-timer.o generic.o
 obj-lowlevel-$(CONFIG_ARCH_S3C24xx) += lowlevel-s3c24x0.o
 obj-lowlevel-$(CONFIG_ARCH_S5PCxx) += lowlevel-s5pcxx.o
 obj-$(CONFIG_ARCH_S3C24xx) += gpio-s3c24x0.o clocks-s3c24xx.o mem-s3c24x0.o
-obj-$(CONFIG_ARCH_S3C64xx) += gpio-s3c64xx.o clocks-s3c64xx.o
+obj-$(CONFIG_ARCH_S3C64xx) += gpio-s3c64xx.o clocks-s3c64xx.o mem-s3c64xx.o
 obj-$(CONFIG_S3C_LOWLEVEL_INIT) += $(obj-lowlevel-y)
diff --git a/arch/arm/mach-samsung/include/mach/devices-s3c64xx.h b/arch/arm/mach-samsung/include/mach/devices-s3c64xx.h
new file mode 100644
index 0000000..bcbee97
--- /dev/null
+++ b/arch/arm/mach-samsung/include/mach/devices-s3c64xx.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef INCLUDE_MACH_DEVICES_S3C64XX_H
+# define INCLUDE_MACH_DEVICES_S3C64XX_H
+
+#include <driver.h>
+#include <mach/s3c64xx-iomap.h>
+
+static inline void s3c64xx_add_uart1(void)
+{
+	add_generic_device("s3c_serial", DEVICE_ID_DYNAMIC, NULL, S3C_UART1_BASE,
+			S3C_UART1_SIZE, IORESOURCE_MEM, NULL);
+}
+
+static inline void s3c64xx_add_uart2(void)
+{
+	add_generic_device("s3c_serial", DEVICE_ID_DYNAMIC, NULL, S3C_UART2_BASE,
+			S3C_UART2_SIZE, IORESOURCE_MEM, NULL);
+}
+
+static inline void s3c64xx_add_uart3(void)
+{
+	add_generic_device("s3c_serial", DEVICE_ID_DYNAMIC, NULL, S3C_UART3_BASE,
+			S3C_UART3_SIZE, IORESOURCE_MEM, NULL);
+}
+
+#endif /* INCLUDE_MACH_DEVICES_S3C64XX_H */
diff --git a/arch/arm/mach-samsung/include/mach/s3c-generic.h b/arch/arm/mach-samsung/include/mach/s3c-generic.h
index 11b083d..b4a9e69 100644
--- a/arch/arm/mach-samsung/include/mach/s3c-generic.h
+++ b/arch/arm/mach-samsung/include/mach/s3c-generic.h
@@ -41,3 +41,19 @@ void s3c24xx_disable_second_sdram_bank(void);
 #ifdef CONFIG_ARCH_S5PCxx
 void s5p_init_pll(void);
 #endif
+
+#ifdef CONFIG_ARCH_S3C64xx
+uint32_t s3c_get_epllclk(void);
+unsigned s3c_get_hsmmc_clk(int);
+void s3c_set_hsmmc_clk(int, int, unsigned);
+unsigned s3c6410_get_memory_size(void);
+struct s3c6410_chipselect {
+	unsigned adr_setup_t; /* in [ns] */
+	unsigned access_setup_t; /* in [ns] */
+	unsigned access_t; /* in [ns] */
+	unsigned cs_hold_t; /* in [ns] */
+	unsigned adr_hold_t; /* in [ns] */
+	unsigned char width; /* 8 or 16 */
+};
+int s3c6410_setup_chipselect(int, const struct s3c6410_chipselect*);
+#endif
diff --git a/arch/arm/mach-samsung/mem-s3c64xx.c b/arch/arm/mach-samsung/mem-s3c64xx.c
new file mode 100644
index 0000000..aca2cf5
--- /dev/null
+++ b/arch/arm/mach-samsung/mem-s3c64xx.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <io.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+
+#define S3C_DRAMC_CHIP_0_CFG (S3C_DRAMC + 0x200)
+
+/* note: this routine honors the first memory bank only */
+unsigned s3c6410_get_memory_size(void)
+{
+	unsigned reg = readl(S3C_DRAMC_CHIP_0_CFG) & 0xff;
+
+	return ~(reg << 24) + 1;
+}
+
+/* configure the timing of one of the available external chip select lines */
+int s3c6410_setup_chipselect(int no, const struct s3c6410_chipselect *c)
+{
+	unsigned per_t = 1000000000 / s3c_get_hclk();
+	unsigned tacs, tcos, tacc, tcoh, tcah, shift;
+	uint32_t reg;
+
+	/* start of cycle to chip select assertion (= address/data setup) */
+	tacs = DIV_ROUND_UP(c->adr_setup_t, per_t);
+	/* start of CS to read/write assertion (= access setup) */
+	tcos = DIV_ROUND_UP(c->access_setup_t, per_t);
+	/* length of read/write assertion (= access lenght) */
+	tacc = DIV_ROUND_UP(c->access_t, per_t) - 1;
+	/* CS hold after access is finished */
+	tcoh = DIV_ROUND_UP(c->cs_hold_t, per_t);
+	/* adress/data hold after CS is deasserted */
+	tcah = DIV_ROUND_UP(c->adr_hold_t, per_t);
+
+	shift = no * 4;
+	reg = readl(S3C_SROM_BW) & ~(0xf << shift);
+	if (c->width == 16)
+		reg |= 0x1 << shift;
+	writel(reg, S3C_SROM_BW);
+#ifdef DEBUG
+	if (tacs > 15 || tcos > 15 || tacc > 31 || tcoh > 15 || tcah > 15) {
+		pr_err("At least one of the timings are invalid\n");
+		return -EINVAL;
+	}
+	pr_info("Will write 0x%08X\n", tacs << 28 | tcos << 24 | tacc << 16 |
+					tcoh << 12 | tcah << 8);
+#endif
+	writel(tacs << 28 | tcos << 24 | tacc << 16 | tcoh << 12 | tcah << 8,
+						S3C_SROM_BC0 + shift);
+
+	return 0;
+}
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 6/8] ARM/Samsung: add the S3C6410 SoC

[Juergen Beisert]

After adding the base support, the CPU can now be enabled in the build system.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/Kconfig              |    6 ++++++
 arch/arm/mach-samsung/Kconfig |   21 ++++++++++++++++++++-
 2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2dbac66..4b7a39c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -79,6 +79,12 @@ config ARCH_S5PCxx
 	select CPU_V7
 	select GENERIC_GPIO
 
+config ARCH_S3C64xx
+	bool "Samsung S3C64xx"
+	select ARCH_SAMSUNG
+	select CPU_V6
+	select GENERIC_GPIO
+
 config ARCH_VERSATILE
 	bool "ARM Versatile boards (ARM926EJ-S)"
 	select CPU_ARM926T
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 37d1aa3..8f63963 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -17,6 +17,8 @@ config BOARDINFO
 config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
 	hex
 	default 0x1ff0 if ARCH_S5PCxx
+# TODO
+	default 0x2000 if ARCH_S3C64xx
 
 config SAMSUNG_IMPROVED_UART
 	bool
@@ -87,6 +89,24 @@ endmenu
 
 endif
 
+if ARCH_S3C64xx
+
+config CPU_S3C6410
+	select SAMSUNG_IMPROVED_UART
+	bool
+
+choice
+
+	prompt "S3C64xx Board Type"
+
+endchoice
+
+menu "Board specific settings       "
+
+endmenu
+
+endif
+
 if ARCH_S5PCxx
 
 config CPU_S5PC110
@@ -106,7 +126,6 @@ config CPU_S5PV210
 
 endif
 
-
 menu "S3C Features              "
 
 config S3C_LOWLEVEL_INIT
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 7/8] ARM/Samsung: add the Mini6410 platform as the first user of the S3C6410 SoC

[Juergen Beisert]

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/Makefile                               |    1 +
 arch/arm/boards/friendlyarm-mini6410/Makefile   |    1 +
 arch/arm/boards/friendlyarm-mini6410/config.h   |    8 +
 arch/arm/boards/friendlyarm-mini6410/env/config |   56 +++++
 arch/arm/boards/friendlyarm-mini6410/mini6410.c |  305 +++++++++++++++++++++++
 arch/arm/configs/friendlyarm_mini6410_defconfig |   40 +++
 arch/arm/mach-samsung/Kconfig                   |   10 +
 7 files changed, 421 insertions(+)
 create mode 100644 arch/arm/boards/friendlyarm-mini6410/Makefile
 create mode 100644 arch/arm/boards/friendlyarm-mini6410/config.h
 create mode 100644 arch/arm/boards/friendlyarm-mini6410/env/config
 create mode 100644 arch/arm/boards/friendlyarm-mini6410/mini6410.c
 create mode 100644 arch/arm/configs/friendlyarm_mini6410_defconfig

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1225df7..bd03fe6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -123,6 +123,7 @@ board-$(CONFIG_MACH_FREESCALE_MX53_LOCO)	:= freescale-mx53-loco
 board-$(CONFIG_MACH_FREESCALE_MX53_SMD)		:= freescale-mx53-smd
 board-$(CONFIG_MACH_GUF_CUPID)			:= guf-cupid
 board-$(CONFIG_MACH_MINI2440)			:= mini2440
+board-$(CONFIG_MACH_MINI6410)			:= friendlyarm-mini6410
 board-$(CONFIG_MACH_QIL_A9260)			:= qil-a9260
 board-$(CONFIG_MACH_TNY_A9260)			:= tny-a926x
 board-$(CONFIG_MACH_TNY_A9263)			:= tny-a926x
diff --git a/arch/arm/boards/friendlyarm-mini6410/Makefile b/arch/arm/boards/friendlyarm-mini6410/Makefile
new file mode 100644
index 0000000..cd7a427
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/Makefile
@@ -0,0 +1 @@
+obj-y += mini6410.o
diff --git a/arch/arm/boards/friendlyarm-mini6410/config.h b/arch/arm/boards/friendlyarm-mini6410/config.h
new file mode 100644
index 0000000..ee38192
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/config.h
@@ -0,0 +1,8 @@
+/* FriendlyARM Mini6410 specific global settings */
+
+#ifndef _MINI6410_CONFIG_H_
+# define _MINI6410_CONFIG_H_
+
+#define S3C64XX_CLOCK_REFERENCE 12000000
+
+#endif /* _MINI6410_CONFIG_H_ */
diff --git a/arch/arm/boards/friendlyarm-mini6410/env/config b/arch/arm/boards/friendlyarm-mini6410/env/config
new file mode 100644
index 0000000..a1c86e1
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/env/config
@@ -0,0 +1,56 @@
+#!/bin/sh
+
+machine=mini6410
+eth0.serverip=a.b.c.d.e
+user=
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d.e
+#eth0.netmask=a.b.c.d.e
+#eth0.gateway=a.b.c.d.e
+eth0.ethaddr=08:90:90:90:90:90
+
+# can be either 'nfs', 'tftp' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root-${machine}.${rootfs_type}
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+kernelimage_type=zimage
+kernelimage=zImage-${machine}
+#kernelimage_type=uimage
+#kernelimage=uImage-$machine
+#kernelimage_type=raw
+#kernelimage=Image-$machine
+#kernelimage_type=raw_lzo
+#kernelimage=Image-$machine.lzo
+
+if [ -n $user ]; then
+	kernelimage="${user}"-"${kernelimage}"
+	nfsroot="${eth0.serverip}:/home/${user}/nfsroot/${machine}"
+	rootfsimage="${user}"-"${rootfsimage}"
+else
+	nfsroot="${eth0.serverip}:/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+#
+# "mini6410" kernel parameter
+# 0 .. 9 = screen type
+# i = touchscreen with propritary FriendlyARM protocol
+# Note: can be "minit6410= " if nothing of these components are connected
+#
+bootargs="console=ttySAC0,115200 mini6410=0"
+
+nand_device="nand"
+nand_parts="256k(barebox),128k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nand=3
diff --git a/arch/arm/boards/friendlyarm-mini6410/mini6410.c b/arch/arm/boards/friendlyarm-mini6410/mini6410.c
new file mode 100644
index 0000000..01437ac
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/mini6410.c
@@ -0,0 +1,305 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <dm9000.h>
+#include <gpio.h>
+#include <generated/mach-types.h>
+#include <asm/armlinux.h>
+#include <mach/s3c-iomap.h>
+#include <mach/devices-s3c64xx.h>
+#include <mach/s3c-generic.h>
+
+/*
+ * dm9000 network controller onboard
+ * Connected to CS line 1 and interrupt line EINT7,
+ * data width is 16 bit
+ * Area 1: Offset 0x300...0x301
+ * Area 2: Offset 0x304...0x305
+ */
+static struct dm9000_platform_data dm9000_data = {
+	.srom = 0,	/* no serial ROM for the ethernet address */
+};
+
+static const unsigned pin_usage[] = {
+	/* UART2 (spare, 3,3 V TTL level only) */
+	GPA4_RXD1 | ENABLE_PU,
+	GPA5_TXD1,
+	GPA6_NCTS1 | ENABLE_PU,
+	GPA7_NRTS1,
+	/* UART3 (spare, 3,3 V TTL level only) */
+	GPB0_RXD2 | ENABLE_PU,
+	GPB1_TXD2,
+	/* UART4 (spare, 3,3 V TTL level only) */
+	GPB2_RXD3 | ENABLE_PU,
+	GPB3_TXD3,
+
+	GPB4_GPIO | GPIO_IN | ENABLE_PU,
+
+	/* I2C bus */
+	GPB5_IIC0_SCL,	/* external PU */
+	GPB6_IIC0_SDA,	/* external PU */
+
+	GPC0_SPI0_MISO | ENABLE_PU,
+	GPC1_SPI0_CLK,
+	GPC2_SPI0_MOSI,
+	GPC3_SPI0_NCS,
+
+	GPC4_SPI1_MISO | ENABLE_PU,
+	GPC5_SPI1_CLK,
+	GPC6_SPI1_MOSI,
+	GPC7_SPI1_NCS,
+
+	GPD0_AC97_BITCLK,
+	GPD1_AC97_NRST,
+	GPD2_AC97_SYNC,
+	GPD3_AC97_SDI | ENABLE_PU,
+	GPD4_AC97_SDO,
+
+	GPE0_GPIO | GPIO_OUT | GPIO_VAL(0), /* LCD backlight off */
+	GPE1_GPIO | GPIO_IN | ENABLE_PU,
+	GPE2_GPIO | GPIO_IN | ENABLE_PU,
+	GPE3_GPIO | GPIO_IN | ENABLE_PU,
+	GPE4_GPIO | GPIO_IN | ENABLE_PU,
+
+	/* keep all camera signals at reasonable values */
+	GPF0_GPIO | GPIO_IN | ENABLE_PU,
+	GPF1_GPIO | GPIO_IN | ENABLE_PU,
+	GPF2_GPIO | GPIO_IN | ENABLE_PU,
+	GPF3_GPIO | GPIO_IN | ENABLE_PU,
+	GPF4_GPIO | GPIO_IN | ENABLE_PU,
+	GPF5_GPIO | GPIO_IN | ENABLE_PU,
+	GPF6_GPIO | GPIO_IN | ENABLE_PU,
+	GPF7_GPIO | GPIO_IN | ENABLE_PU,
+	GPF8_GPIO | GPIO_IN | ENABLE_PU,
+	GPF9_GPIO | GPIO_IN | ENABLE_PU,
+	GPF10_GPIO | GPIO_IN | ENABLE_PU,
+	GPF11_GPIO | GPIO_IN | ENABLE_PU,
+	GPF12_GPIO | GPIO_IN | ENABLE_PU,
+	GPF13_GPIO | GPIO_OUT | GPIO_VAL(0), /* USB power off */
+#if 0
+	GPF14_CLKOUT, /* for testing purposes, but very noisy */
+#else
+	GPF14_GPIO | GPIO_OUT | GPIO_VAL(0), /* Buzzer off */
+#endif
+	GPF15_GPIO | GPIO_OUT | GPIO_VAL(0), /* Backlight PWM inactive */
+
+	/* SD card slot (all signals have external 10k PU) */
+	GPG0_MMC0_CLK,
+	GPG1_MMC0_CMD,
+	GPG2_MMC0_DAT0,
+	GPG3_MMC0_DAT1,
+	GPG4_MMC0_DAT2,
+	GPG5_MMC0_DAT3,
+	GPG6_MMC0_NCD,
+
+	/* SDIO slot (all used signals have external PU) */
+	GPH0_GPIO | GPIO_IN,	/* CLK */
+	GPH1_GPIO | GPIO_IN,	/* CMD */
+	GPH2_GPIO | GPIO_IN,	/* DAT0 */
+	GPH3_GPIO | GPIO_IN,	/* DAT1 */
+	GPH4_GPIO | GPIO_IN,	/* DAT2 */
+	GPH5_GPIO | GPIO_IN,	/* DAT3 */
+	GPH6_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+	GPH7_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+	GPH8_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+	GPH9_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+
+	/* as long as we are not using the LCD controller, disable the pins */
+	GPI0_GPIO | GPIO_IN | ENABLE_PD,
+	GPI1_GPIO | GPIO_IN | ENABLE_PD,
+	GPI2_GPIO | GPIO_IN | ENABLE_PD,
+	GPI3_GPIO | GPIO_IN | ENABLE_PD,
+	GPI4_GPIO | GPIO_IN | ENABLE_PD,
+	GPI5_GPIO | GPIO_IN | ENABLE_PD,
+	GPI6_GPIO | GPIO_IN | ENABLE_PD,
+	GPI7_GPIO | GPIO_IN | ENABLE_PD,
+	GPI8_GPIO | GPIO_IN | ENABLE_PD,
+	GPI9_GPIO | GPIO_IN | ENABLE_PD,
+	GPI10_GPIO | GPIO_IN | ENABLE_PD,
+	GPI11_GPIO | GPIO_IN | ENABLE_PD,
+	GPI12_GPIO | GPIO_IN | ENABLE_PD,
+	GPI13_GPIO | GPIO_IN | ENABLE_PD,
+	GPI14_GPIO | GPIO_IN | ENABLE_PD,
+	GPI15_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ0_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ1_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ2_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ3_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ4_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ5_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ6_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ7_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ8_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ9_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ10_GPIO | GPIO_IN | ENABLE_PD,
+	GPJ11_GPIO | GPIO_IN | ENABLE_PD,
+
+	GPK0_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPK1_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPK2_GPIO | GPIO_IN,
+	GPK3_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPK4_GPIO | GPIO_OUT | GPIO_VAL(1),	/* LED #1 (high = LED off) */
+	GPK5_GPIO | GPIO_OUT | GPIO_VAL(1),	/* LED #2 (high = LED off) */
+	GPK6_GPIO | GPIO_OUT | GPIO_VAL(1),	/* LED #3 (high = LED off) */
+	GPK7_GPIO | GPIO_OUT | GPIO_VAL(1),	/* LED #4 (high = LED off) */
+	GPK8_GPIO | GPIO_IN, 			/* (external PU) */
+	GPK9_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPK10_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPK11_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPK12_GPIO | GPIO_IN,			/* OCT_DET */
+	GPK13_GPIO | GPIO_IN,			/* WIFI power (external PU) */
+	GPK14_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPK15_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+
+	GPL0_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL1_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL2_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL3_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL4_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL5_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL6_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL7_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPL8_GPIO | GPIO_IN,			/* EINT16 (external PU) */
+	GPL9_GPIO | GPIO_IN | ENABLE_PU,	/* EINT17 */
+	GPL10_GPIO | GPIO_IN | ENABLE_PU,	/* EINT18 */
+	GPL11_GPIO | GPIO_IN,			/* EINT19 + K7 (external PU) */
+	GPL12_GPIO | GPIO_IN,			/* EINT20 + K6 (external PU) */
+	GPL13_GPIO | GPIO_IN,			/* SD0 WP (external PU) */
+	GPL14_GPIO | GPIO_IN,			/* SD1 WP (external PU) */
+
+	GPM0_GPIO | GPIO_IN,			/* (external PU) */
+	GPM1_GPIO | GPIO_IN,			/* (external PU) */
+	GPM2_GPIO | GPIO_IN,			/* (external PU) */
+	GPM3_GPIO | GPIO_IN,			/* (external PU) */
+	GPM4_GPIO | GPIO_IN,			/* (external PU) */
+	GPM5_GPIO | GPIO_IN,			/* (external PU) */
+
+	GPN0_GPIO | GPIO_IN,			/* EINT0 (external PU) */
+	GPN1_GPIO | GPIO_IN,			/* EINT1 (external PU) */
+	GPN2_GPIO | GPIO_IN,			/* EINT2 (external PU) */
+	GPN3_GPIO | GPIO_IN,			/* EINT3 (external PU) */
+	GPN4_GPIO | GPIO_IN,			/* EINT4 (external PU) */
+	GPN5_GPIO | GPIO_IN,			/* EINT5 (external PU) */
+	GPN6_GPIO | GPIO_IN,			/* EINT6 (external PU) */
+	GPN7_GPIO | GPIO_IN | ENABLE_PU,	/* EINT7 DM9000 interrupt */
+	GPN8_GPIO | GPIO_IN,			/* EINT8 USB detect (external PU) */
+	GPN9_GPIO | GPIO_IN,			/* EINT9 (external PU) */
+	GPN10_GPIO | GPIO_IN,			/* SD1 CD (external PU) */
+	GPN11_GPIO | GPIO_IN,			/* EINT11 (external PU) */
+	GPN12_GPIO | GPIO_IN,			/* EINT12 IR in (external PU) */
+	GPN13_GPIO | GPIO_IN,			/* BOOT0/EINT13 (externally fixed) */
+	GPN14_GPIO | GPIO_IN,			/* BOOT1/EINT14 (externally fixed) */
+	GPN15_GPIO | GPIO_IN,			/* BOOT2/EINT15 (externally fixed) */
+
+	GPO0_NCS2,				/* NAND */
+	GPO1_NCS3,				/* NAND */
+	GPO2_NCS4,				/* CON5 */
+	GPO3_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO4_GPIO | GPIO_IN | ENABLE_PU,	/* CON5 pin 8 */
+	GPO5_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO6_ADDR6,				/* CON5 */
+	GPO7_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO8_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO9_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO10_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO11_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO12_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO13_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO14_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPO15_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+
+	GPP0_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPP1_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPP2_NWAIT | ENABLE_PU,			/* CON5 */
+	GPP3_FALE,				/* NAND */
+	GPP4_FCLE,				/* NAND */
+	GPP5_FWE,				/* NAND */
+	GPP6_FRE,				/* NAND */
+	GPP7_RNB,				/* NAND (external PU) */
+	GPP8_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPP9_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPP10_GPIO | GPIO_IN,			/* (external PU) */
+	GPP11_GPIO | GPIO_IN,			/* (external PU) */
+	GPP12_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPP13_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+	GPP14_GPIO | GPIO_IN | ENABLE_PU,	/* not used */
+
+	GPQ0_GPIO | GPIO_IN | ENABLE_PU,	/* not used as LADDR18 */
+	GPQ1_GPIO | GPIO_IN,			/* (external PU) */
+	GPQ2_GPIO | GPIO_IN,			/* (external PU) */
+	GPQ3_GPIO | GPIO_IN,			/* (external PU) */
+	GPQ4_GPIO | GPIO_IN,			/* (external PU) */
+	GPQ5_GPIO | GPIO_IN,			/* (external PU) */
+	GPQ6_GPIO | GPIO_IN,			/* (external PU) */
+	GPQ7_GPIO | GPIO_IN | ENABLE_PU,	/* not used as LADDR17 */
+	GPQ8_GPIO | GPIO_IN | ENABLE_PU,	/* not used as LADDR16 */
+};
+
+static int mini6410_mem_init(void)
+{
+	arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c6410_get_memory_size());
+
+	return 0;
+}
+mem_initcall(mini6410_mem_init);
+
+static const struct s3c6410_chipselect dm900_cs = {
+	.adr_setup_t = 0,
+	.access_setup_t = 0,
+	.access_t = 20,
+	.cs_hold_t = 3,
+	.adr_hold_t = 20, /* CS must be de-asserted for at least 20 ns */
+	.width = 16,
+};
+
+static void mini6410_setup_dm9000_cs(void)
+{
+	s3c6410_setup_chipselect(1, &dm900_cs);
+}
+
+static int mini6410_devices_init(void)
+{
+	int i;
+
+	/* ----------- configure the access to the outer space ---------- */
+	for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
+		s3c_gpio_mode(pin_usage[i]);
+
+	mini6410_setup_dm9000_cs();
+	add_dm9000_device(0, S3C_CS1_BASE + 0x300, S3C_CS1_BASE + 0x304,
+				IORESOURCE_MEM_16BIT, &dm9000_data);
+
+	armlinux_set_bootparams((void *)S3C_SDRAM_BASE + 0x100);
+	armlinux_set_architecture(MACH_TYPE_MINI6410);
+
+	return 0;
+}
+
+device_initcall(mini6410_devices_init);
+
+static int mini6410_console_init(void)
+{
+	s3c_gpio_mode(GPA0_RXD0 | ENABLE_PU);
+	s3c_gpio_mode(GPA1_TXD0);
+	s3c_gpio_mode(GPA2_NCTS0 | ENABLE_PU);
+	s3c_gpio_mode(GPA3_NRTS0);
+
+	s3c64xx_add_uart1();
+
+	return 0;
+}
+
+console_initcall(mini6410_console_init);
diff --git a/arch/arm/configs/friendlyarm_mini6410_defconfig b/arch/arm/configs/friendlyarm_mini6410_defconfig
new file mode 100644
index 0000000..b80f8fb
--- /dev/null
+++ b/arch/arm/configs/friendlyarm_mini6410_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARCH_S3C64xx=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_BROKEN=y
+CONFIG_PROMPT="mini6410:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/friendlyarm-mini6410/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_DRIVER_NET_DM9K=y
+# CONFIG_SPI is not set
+CONFIG_ZLIB=y
+CONFIG_BZLIB=y
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 8f63963..e621259 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -6,11 +6,13 @@ if ARCH_SAMSUNG
 config ARCH_TEXT_BASE
 	hex
 	default 0x31fc0000 if MACH_MINI2440
+	default 0x57fc0000 if MACH_MINI6410
 	default 0x31fc0000 if MACH_A9M2440
 	default 0x31fc0000 if MACH_A9M2410
 
 config BOARDINFO
 	default "Mini 2440"    if MACH_MINI2440
+	default "Mini 6410"    if MACH_MINI6410
 	default "Digi A9M2440" if MACH_A9M2440
 	default "Digi A9M2410" if MACH_A9M2410
 
@@ -99,6 +101,14 @@ choice
 
 	prompt "S3C64xx Board Type"
 
+config MACH_MINI6410
+	bool "Mini 6410"
+	select CPU_S3C6410
+	select HAS_DM9000
+	help
+	  Say Y here if you are using FriendlyARM Mini6410 board equipped
+	  with a Samsung S3C6410 Processor
+
 endchoice
 
 menu "Board specific settings       "
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 8/8] ARM/Samsung: add the Tiny6410 platform as the second user of the S3C6410 SoC

[Juergen Beisert]

The Tiny6410 and its base board is a pure development platform.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 arch/arm/Makefile                                  |    1 +
 arch/arm/boards/friendlyarm-tiny6410/Kconfig       |   19 ++++
 arch/arm/boards/friendlyarm-tiny6410/Makefile      |    3 +
 arch/arm/boards/friendlyarm-tiny6410/config.h      |    8 ++
 .../friendlyarm-tiny6410/development-board.c       |  100 ++++++++++++++++++++
 arch/arm/boards/friendlyarm-tiny6410/env/config    |   56 +++++++++++
 arch/arm/boards/friendlyarm-tiny6410/tiny6410.c    |   80 ++++++++++++++++
 arch/arm/boards/friendlyarm-tiny6410/tiny6410.h    |   14 +++
 arch/arm/configs/friendlyarm_tiny6410_defconfig    |   41 ++++++++
 arch/arm/configs/tiny6410_defconfig                |   41 ++++++++
 arch/arm/mach-samsung/Kconfig                      |   11 +++
 11 files changed, 374 insertions(+)
 create mode 100644 arch/arm/boards/friendlyarm-tiny6410/Kconfig
 create mode 100644 arch/arm/boards/friendlyarm-tiny6410/Makefile
 create mode 100644 arch/arm/boards/friendlyarm-tiny6410/config.h
 create mode 100644 arch/arm/boards/friendlyarm-tiny6410/development-board.c
 create mode 100644 arch/arm/boards/friendlyarm-tiny6410/env/config
 create mode 100644 arch/arm/boards/friendlyarm-tiny6410/tiny6410.c
 create mode 100644 arch/arm/boards/friendlyarm-tiny6410/tiny6410.h
 create mode 100644 arch/arm/configs/friendlyarm_tiny6410_defconfig
 create mode 100644 arch/arm/configs/tiny6410_defconfig

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bd03fe6..ab3f730 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -124,6 +124,7 @@ board-$(CONFIG_MACH_FREESCALE_MX53_SMD)		:= freescale-mx53-smd
 board-$(CONFIG_MACH_GUF_CUPID)			:= guf-cupid
 board-$(CONFIG_MACH_MINI2440)			:= mini2440
 board-$(CONFIG_MACH_MINI6410)			:= friendlyarm-mini6410
+board-$(CONFIG_MACH_TINY6410)			:= friendlyarm-tiny6410
 board-$(CONFIG_MACH_QIL_A9260)			:= qil-a9260
 board-$(CONFIG_MACH_TNY_A9260)			:= tny-a926x
 board-$(CONFIG_MACH_TNY_A9263)			:= tny-a926x
diff --git a/arch/arm/boards/friendlyarm-tiny6410/Kconfig b/arch/arm/boards/friendlyarm-tiny6410/Kconfig
new file mode 100644
index 0000000..374820f
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/Kconfig
@@ -0,0 +1,19 @@
+if MACH_TINY6410
+
+choice
+	prompt "FriendlyARM Tiny6410 baseboard"
+	help
+	  Since the Tiny6410 is a CPU card only, it requires a basebord to make
+	  it work. Select here the baseboard Barebox should expect and
+	  configure.
+
+config MACH_TINY6410_FA
+	bool
+	select HAS_DM9000
+	prompt "FA development platform"
+	help
+	  FriendlyARM's Tiny6410 evaluation board.
+
+endchoice
+
+endif
diff --git a/arch/arm/boards/friendlyarm-tiny6410/Makefile b/arch/arm/boards/friendlyarm-tiny6410/Makefile
new file mode 100644
index 0000000..b3ab12e
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/Makefile
@@ -0,0 +1,3 @@
+obj-y += tiny6410.o
+
+obj-$(CONFIG_MACH_TINY6410_FA) += development-board.o
diff --git a/arch/arm/boards/friendlyarm-tiny6410/config.h b/arch/arm/boards/friendlyarm-tiny6410/config.h
new file mode 100644
index 0000000..04f6857
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/config.h
@@ -0,0 +1,8 @@
+/* FriendlyARM Tiny6410 specific global settings */
+
+#ifndef _TINY6410_CONFIG_H_
+# define _TINY6410_CONFIG_H_
+
+#define S3C64XX_CLOCK_REFERENCE 12000000
+
+#endif /* _TINY6410_CONFIG_H_ */
diff --git a/arch/arm/boards/friendlyarm-tiny6410/development-board.c b/arch/arm/boards/friendlyarm-tiny6410/development-board.c
new file mode 100644
index 0000000..5595900
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/development-board.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * The FriendlyARM's Tiny6410 evaluation board comes with all connectors and
+ * devices to make the Tiny6410 CPU card work. This includes:
+ *
+ * - the DM9000 network controller
+ * - USB/MCI connectors
+ * - display connector
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <gpio.h>
+#include <dm9000.h>
+#include <mach/devices-s3c64xx.h>
+#include <mach/s3c-generic.h>
+
+#include "tiny6410.h"
+
+/*
+ * dm9000 network controller onboard
+ * Connected to CS line 1 and interrupt line EINT7,
+ * data width is 16 bit
+ * Area 1: Offset 0x300...0x301
+ * Area 2: Offset 0x304...0x305
+ */
+static struct dm9000_platform_data dm9000_data = {
+	.srom = 0,	/* no serial ROM for the ethernet address */
+};
+
+static const struct s3c6410_chipselect dm900_cs = {
+	.adr_setup_t = 0,
+	.access_setup_t = 0,
+	.access_t = 20,
+	.cs_hold_t = 3,
+	.adr_hold_t = 20, /* CS must be de-asserted for at least 20 ns */
+	.width = 16,
+};
+
+static void tiny6410evk_setup_dm9000_cs(void)
+{
+	s3c6410_setup_chipselect(1, &dm900_cs);
+}
+
+static const unsigned tiny6410evk_pin_usage[] = {
+	/* UART1 (V24) */
+	GPA4_RXD1 | ENABLE_PU,
+	GPA5_TXD1,
+	GPA6_NCTS1 | ENABLE_PU,
+	GPA7_NRTS1,
+	/* UART2 (V24) */
+	GPB0_RXD2 | ENABLE_PU,
+	GPB1_TXD2,
+	/* UART3 (spare, 3,3 V TTL level only) */
+	GPB2_RXD3 | ENABLE_PU,
+	GPB3_TXD3,
+};
+
+static int tiny6410evk_devices_init(void)
+{
+	int i;
+
+	/* init CPU card specific devices first */
+	tiny6410_init("FA EVK");
+
+	/* ----------- configure the access to the outer space ---------- */
+	for (i = 0; i < ARRAY_SIZE(tiny6410evk_pin_usage); i++)
+		s3c_gpio_mode(tiny6410evk_pin_usage[i]);
+
+	tiny6410evk_setup_dm9000_cs();
+	add_dm9000_device(0, S3C_CS1_BASE + 0x300, S3C_CS1_BASE + 0x304,
+				IORESOURCE_MEM_16BIT, &dm9000_data);
+	return 0;
+}
+device_initcall(tiny6410evk_devices_init);
+
+static int tiny6410evk_console_init(void)
+{
+	/* note: UART0 has no RTS/CTS connected */
+	s3c_gpio_mode(GPA0_RXD0 | ENABLE_PU);
+	s3c_gpio_mode(GPA1_TXD0);
+
+	s3c64xx_add_uart1();
+
+	return 0;
+}
+console_initcall(tiny6410evk_console_init);
+
diff --git a/arch/arm/boards/friendlyarm-tiny6410/env/config b/arch/arm/boards/friendlyarm-tiny6410/env/config
new file mode 100644
index 0000000..35d0fac
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/env/config
@@ -0,0 +1,56 @@
+#!/bin/sh
+
+machine=tiny6410
+eth0.serverip=a.b.c.d.e
+user=
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d.e
+#eth0.netmask=a.b.c.d.e
+#eth0.gateway=a.b.c.d.e
+eth0.ethaddr=08:90:90:90:90:90
+
+# can be either 'nfs', 'tftp' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root-${machine}.${rootfs_type}
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+kernelimage_type=zimage
+kernelimage=zImage-${machine}
+#kernelimage_type=uimage
+#kernelimage=uImage-$machine
+#kernelimage_type=raw
+#kernelimage=Image-$machine
+#kernelimage_type=raw_lzo
+#kernelimage=Image-$machine.lzo
+
+if [ -n $user ]; then
+	kernelimage="${user}"-"${kernelimage}"
+	nfsroot="${eth0.serverip}:/home/${user}/nfsroot/${machine}"
+	rootfsimage="${user}"-"${rootfsimage}"
+else
+	nfsroot="${eth0.serverip}:/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+#
+# "tiny6410" kernel parameter
+# 0 .. 9 = screen type
+# i = touchscreen with propritary FriendlyARM protocol
+# Note: can be "tiny6410= " if nothing of these components are connected
+#
+bootargs="console=ttySAC0,115200 tiny6410=0"
+
+nand_device="nand"
+nand_parts="256k(barebox),128k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nand=3
diff --git a/arch/arm/boards/friendlyarm-tiny6410/tiny6410.c b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.c
new file mode 100644
index 0000000..db13c06
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <gpio.h>
+#include <generated/mach-types.h>
+#include <asm/armlinux.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+
+static const unsigned tiny6410_pin_usage[] = {
+	/* UART0 */
+	GPA2_GPIO | GPIO_IN | ENABLE_PU, /* CTS not connected */
+	GPA3_GPIO | GPIO_IN | ENABLE_PU, /* RTS not connected */
+
+	/* local bus' D0 ... D15 are always active */
+	/* local bus' A0...A5 are always active */
+
+	/* internal NAND memory */
+	GPO0_NCS2,	/* NAND's first chip select line */
+	/* NAND's second chip select line, not used */
+	GPO1_GPIO | GPIO_OUT | GPIO_VAL(1),
+	GPP3_FALE,
+	GPP4_FCLE,
+	GPP5_FWE,
+	GPP6_FRE,
+	GPP7_RNB, /* external pull-up */
+
+	GPF13_GPIO  | GPIO_OUT | GPIO_VAL(0), /* OTG power supply, 0 = off */
+
+	/* nowhere connected */
+	GPO2_GPIO | GPIO_IN | ENABLE_PU,
+	GPO3_GPIO | GPIO_IN | ENABLE_PU,
+	GPO4_GPIO | GPIO_IN | ENABLE_PU,
+	GPO5_GPIO | GPIO_IN | ENABLE_PU,
+
+	/* local bus address lines 6...15 are nowhere connected */
+	GPO6_GPIO | GPIO_IN | ENABLE_PU,
+	GPO7_GPIO | GPIO_IN | ENABLE_PU,
+	GPO8_GPIO | GPIO_IN | ENABLE_PU,
+	GPO9_GPIO | GPIO_IN | ENABLE_PU,
+	GPO10_GPIO | GPIO_IN | ENABLE_PU,
+	GPO11_GPIO | GPIO_IN | ENABLE_PU,
+	GPO12_GPIO | GPIO_IN | ENABLE_PU,
+	GPO13_GPIO | GPIO_IN | ENABLE_PU,
+	GPO14_GPIO | GPIO_IN | ENABLE_PU,
+	GPO15_GPIO | GPIO_IN | ENABLE_PU,
+};
+
+static int tiny6410_mem_init(void)
+{
+	arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c6410_get_memory_size());
+
+	return 0;
+}
+mem_initcall(tiny6410_mem_init);
+
+void tiny6410_init(const char *bb_name)
+{
+	int i;
+
+	/* ----------- configure the access to the outer space ---------- */
+	for (i = 0; i < ARRAY_SIZE(tiny6410_pin_usage); i++)
+		s3c_gpio_mode(tiny6410_pin_usage[i]);
+
+	armlinux_set_bootparams((void *)S3C_SDRAM_BASE + 0x100);
+	armlinux_set_architecture(MACH_TYPE_TINY6410);
+}
diff --git a/arch/arm/boards/friendlyarm-tiny6410/tiny6410.h b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.h
new file mode 100644
index 0000000..98db422
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.h
@@ -0,0 +1,14 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* to be called by the base board */
+void tiny6410_init(const char*);
diff --git a/arch/arm/configs/friendlyarm_tiny6410_defconfig b/arch/arm/configs/friendlyarm_tiny6410_defconfig
new file mode 100644
index 0000000..3af5e04
--- /dev/null
+++ b/arch/arm/configs/friendlyarm_tiny6410_defconfig
@@ -0,0 +1,41 @@
+CONFIG_ARCH_S3C64xx=y
+CONFIG_MACH_TINY6410=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_BROKEN=y
+CONFIG_PROMPT="mini6410:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/friendlyarm-mini6410/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_DRIVER_NET_DM9K=y
+# CONFIG_SPI is not set
+CONFIG_ZLIB=y
+CONFIG_BZLIB=y
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/tiny6410_defconfig b/arch/arm/configs/tiny6410_defconfig
new file mode 100644
index 0000000..5246196
--- /dev/null
+++ b/arch/arm/configs/tiny6410_defconfig
@@ -0,0 +1,41 @@
+CONFIG_ARCH_S3C64xx=y
+CONFIG_MACH_TINY6410=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_BROKEN=y
+CONFIG_PROMPT="tiny6410:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/friendlyarm-tiny6410/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_DRIVER_NET_DM9K=y
+# CONFIG_SPI is not set
+CONFIG_ZLIB=y
+CONFIG_BZLIB=y
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index e621259..51253db 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -7,12 +7,14 @@ config ARCH_TEXT_BASE
 	hex
 	default 0x31fc0000 if MACH_MINI2440
 	default 0x57fc0000 if MACH_MINI6410
+	default 0x57fc0000 if MACH_TINY6410
 	default 0x31fc0000 if MACH_A9M2440
 	default 0x31fc0000 if MACH_A9M2410
 
 config BOARDINFO
 	default "Mini 2440"    if MACH_MINI2440
 	default "Mini 6410"    if MACH_MINI6410
+	default "Tiny 6410"    if MACH_TINY6410
 	default "Digi A9M2440" if MACH_A9M2440
 	default "Digi A9M2410" if MACH_A9M2410
 
@@ -109,10 +111,19 @@ config MACH_MINI6410
 	  Say Y here if you are using FriendlyARM Mini6410 board equipped
 	  with a Samsung S3C6410 Processor
 
+config MACH_TINY6410
+	bool "Tiny 6410"
+	select CPU_S3C6410
+	help
+	  Say Y here if you are using FriendlyARM Tiny6410 CPU card equipped
+	  with a Samsung S3C6410 Processor
+
 endchoice
 
 menu "Board specific settings       "
 
+source arch/arm/boards/friendlyarm-tiny6410/Kconfig
+
 endmenu
 
 endif
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox