From: Renaud Barbier <renaud.barbier@ge.com>
To: barebox@lists.infradead.org
Subject: [PATCH 3/4] fsl: Freescale TSEC specific initialization.
Date: Tue, 7 Aug 2012 15:30:57 +0100 [thread overview]
Message-ID: <1344349858-6068-4-git-send-email-renaud.barbier@ge.com> (raw)
In-Reply-To: <1343232061-1789-1-git-send-email-renaud.barbier@ge.com>
The fsl_eth_init function maps the TSEC registers (MAC, TBI and
external PHY access registers). It also passes the PHY address and
TBI registers initialization values.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
---
arch/ppc/mach-mpc85xx/Makefile | 1 +
arch/ppc/mach-mpc85xx/eth-devices.c | 49 +++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+), 0 deletions(-)
create mode 100644 arch/ppc/mach-mpc85xx/eth-devices.c
diff --git a/arch/ppc/mach-mpc85xx/Makefile b/arch/ppc/mach-mpc85xx/Makefile
index 03addaf..af9be29 100644
--- a/arch/ppc/mach-mpc85xx/Makefile
+++ b/arch/ppc/mach-mpc85xx/Makefile
@@ -6,3 +6,4 @@ obj-y += fsl_law.o
obj-y += speed.o
obj-y +=time.o
obj-$(CONFIG_MP) += mp.o
+obj-$(CONFIG_DRIVER_NET_GIANFAR) += eth-devices.o
diff --git a/arch/ppc/mach-mpc85xx/eth-devices.c b/arch/ppc/mach-mpc85xx/eth-devices.c
new file mode 100644
index 0000000..02a3722
--- /dev/null
+++ b/arch/ppc/mach-mpc85xx/eth-devices.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2012 GE Intelligent Platforms, Inc
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <mach/immap_85xx.h>
+#include <mach/gianfar.h>
+
+int fsl_eth_init(int num, struct gfar_info_struct *gf)
+{
+ struct resource *res;
+
+ res = xzalloc(3 * sizeof(struct resource));
+ /* TSEC interface registers */
+ res[0].start = GFAR_BASE_ADDR + ((num - 1) * 0x1000);
+ res[0].end = res[0].start + 0x1000;
+ res[0].flags = IORESOURCE_MEM;
+ /* External PHY access always through eTSEC1 */
+ res[1].start = MDIO_BASE_ADDR;
+ res[1].end = res[1].start + 0x1000;
+ res[1].flags = IORESOURCE_MEM;
+ /* Access to TBI/RTBI interface. */
+ res[2].start = MDIO_BASE_ADDR + ((num - 1) * 0x1000);
+ res[2].end = res[2].start + 0x1000;
+ res[2].flags = IORESOURCE_MEM;
+
+ add_generic_device_res("gfar", DEVICE_ID_DYNAMIC, res, 3, gf);
+
+ return 0;
+}
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-07 14:31 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-25 16:00 [PATCH 0/3] ppc: Freescale TSEC driver Renaud Barbier
2012-07-25 16:00 ` [PATCH 1/3] ppc: GIANFAR base address definition Renaud Barbier
2012-07-25 16:01 ` [PATCH 2/3] net: GIANFAR driver Renaud Barbier
2012-07-27 7:43 ` Sascha Hauer
2012-07-25 16:01 ` [PATCH 3/3] ppc: P2020RDB Ethernet configuration Renaud Barbier
2012-07-27 7:45 ` Sascha Hauer
2012-08-07 14:30 ` [PATCH V2 0/4] ppc: Freescale TSEC driver Renaud Barbier
2012-08-10 19:16 ` Sascha Hauer
2012-08-07 14:30 ` [PATCH 1/4] ppc: GIANFAR base address definition Renaud Barbier
2012-08-07 14:30 ` [PATCH 2/4] net: GIANFAR driver Renaud Barbier
2012-08-07 14:30 ` Renaud Barbier [this message]
2012-08-07 14:30 ` [PATCH 4/4] ppc: P2020RDB Ethernet configuration Renaud Barbier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344349858-6068-4-git-send-email-renaud.barbier@ge.com \
--to=renaud.barbier@ge.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox