From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 7/8] ARM: fix netx/MLO/s5p image build for pbl
Date: Sun, 12 Aug 2012 16:22:45 +0200 [thread overview]
Message-ID: <1344781367-13547-8-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1344781367-13547-1-git-send-email-s.hauer@pengutronix.de>
If pbl support is enabled only zbarebox.bin was built, but
not the SoC specific images. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/Makefile | 45 +++++++++++++++++++++++++++++----------------
1 file changed, 29 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 948eb4e..8e660be 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,7 +160,16 @@ CPPFLAGS += -fdata-sections -ffunction-sections
LDFLAGS_barebox += -static --gc-sections
endif
-barebox.netx: barebox.bin
+ifdef CONFIG_IMAGE_COMPRESSION
+KBUILD_BINARY := arch/arm/pbl/zbarebox.bin
+KBUILD_TARGET := zbarebox.bin
+$(KBUILD_BINARY): $(KBUILD_TARGET)
+else
+KBUILD_BINARY := barebox.bin
+KBUILD_TARGET := barebox.bin
+endif
+
+barebox.netx: $(KBUILD_BINARY)
$(Q)scripts/gen_netx_image -i $< -o barebox.netx \
--sdramctrl=$(CONFIG_NETX_SDRAM_CTRL) \
--sdramtimctrl=$(CONFIG_NETX_SDRAM_TIMING_CTRL) \
@@ -169,36 +178,38 @@ barebox.netx: barebox.bin
--cookie=$(CONFIG_NETX_COOKIE);
ifeq ($(machine-y),netx)
-KBUILD_IMAGE := barebox.netx
+KBUILD_TARGET := barebox.netx
+KBUILD_BINARY := $(KBUILD_TARGET)
endif
-barebox.s5p: barebox.bin
+barebox.s5p: $(KBUILD_BINARY)
$(Q)scripts/s5p_cksum $< barebox.s5p
ifeq ($(CONFIG_ARCH_S5PCxx),y)
-KBUILD_IMAGE := barebox.s5p
+KBUILD_TARGET := barebox.s5p
+KBUILD_BINARY := $(KBUILD_TARGET)
endif
-MLO: barebox.bin
- @echo " IFT " $@
- $(Q)scripts/omap_signGP $< $(TEXT_BASE) 1
- $(Q)test -e $<.ift && mv $<.ift MLO
+quiet_cmd_mlo ?= IFT $@
+ cmd_mlo ?= scripts/omap_signGP $< $(TEXT_BASE) 1; \
+ test -e $<.ift && mv $<.ift MLO
+
+MLO: $(KBUILD_BINARY)
+ $(call if_changed,mlo)
ifeq ($(CONFIG_OMAP_BUILD_IFT),y)
-KBUILD_IMAGE := MLO
+KBUILD_TARGET := MLO
+KBUILD_BINARY := $(KBUILD_TARGET)
endif
-barebox.ubl: barebox.bin
+barebox.ubl: $(KBUILD_BINARY)
@echo " UBL " $@
$(Q)scripts/mkublheader $< > barebox.ubl
$(Q)cat $< >> barebox.ubl
ifeq ($(CONFIG_ARCH_DAVINCI),y)
-KBUILD_IMAGE := barebox.ubl
-endif
-
-ifdef CONFIG_IMAGE_COMPRESSION
-KBUILD_IMAGE := zbarebox.bin
+KBUILD_TARGET := barebox.ubl
+KBUILD_BINARY := $(KBUILD_TARGET)
endif
pbl := arch/arm/pbl
@@ -208,6 +219,8 @@ zbarebox.S zbarebox.bin zbarebox: barebox.bin
archclean:
$(MAKE) $(clean)=$(pbl)
+KBUILD_IMAGE := $(KBUILD_BINARY)
+
archprepare: maketools
maketools:
$(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h
@@ -231,4 +244,4 @@ common-y += arch/arm/lib/ arch/arm/cpu/
lds-y := arch/arm/lib/barebox.lds
-CLEAN_FILES += include/generated/mach-types.h arch/arm/lib/barebox.lds
+CLEAN_FILES += include/generated/mach-types.h arch/arm/lib/barebox.lds barebox-flash-image
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-12 14:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-12 14:22 [PATCH v2] pbl updates Sascha Hauer
2012-08-12 14:22 ` [PATCH 1/8] Makefile.lib: add disasm and ln commands Sascha Hauer
2012-08-12 14:22 ` [PATCH 2/8] Makefile: generate a barebox-flash-image link Sascha Hauer
2012-08-12 14:22 ` [PATCH 4/8] ARM s3c boards: Do not hardcode image sizes Sascha Hauer
2012-08-12 14:37 ` Juergen Beisert
2012-08-12 14:22 ` [PATCH 5/8] ARM boards: Make boards pbl safe Sascha Hauer
2012-08-12 14:22 ` [PATCH 6/8] ARM Makefile: Do not hardcode targets in MLO/netx/davinci/s5p Sascha Hauer
2012-08-12 14:22 ` Sascha Hauer [this message]
2012-08-12 14:22 ` [PATCH 8/8] ARM pbl: generate zbarebox.map in $(obj) Sascha Hauer
2012-08-12 18:03 ` [PATCH v2] pbl updates Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344781367-13547-8-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox