From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 13/13] omap3_clock: avoid initializing cores not present on TI AM35xx
Date: Mon, 20 Aug 2012 16:20:28 +0200 [thread overview]
Message-ID: <1345472428-17417-14-git-send-email-jlu@pengutronix.de> (raw)
In-Reply-To: <1345472428-17417-1-git-send-email-jlu@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
arch/arm/mach-omap/include/mach/sys_info.h | 2 ++
arch/arm/mach-omap/omap3_clock.c | 18 +++++++++++++++---
arch/arm/mach-omap/omap3_generic.c | 7 +++++++
3 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/sys_info.h b/arch/arm/mach-omap/include/mach/sys_info.h
index f0594bf..ca7471f 100644
--- a/arch/arm/mach-omap/include/mach/sys_info.h
+++ b/arch/arm/mach-omap/include/mach/sys_info.h
@@ -50,6 +50,7 @@
#define CPU_2430 0x2430
#define CPU_3430 0x3430
#define CPU_3630 0x3630
+#define CPU_AM35XX 0x3500
/**
* Define CPU revisions
@@ -85,6 +86,7 @@
* Hawkeye definitions to identify silicon families
*/
#define OMAP_HAWKEYE_34XX 0xB7AE
+#define OMAP_HAWKEYE_AM35XX 0xB868
#define OMAP_HAWKEYE_36XX 0xB891
/** These are implemented by the System specific code in omapX-generic.c */
diff --git a/arch/arm/mach-omap/omap3_clock.c b/arch/arm/mach-omap/omap3_clock.c
index 1b0c65c..454bccb 100644
--- a/arch/arm/mach-omap/omap3_clock.c
+++ b/arch/arm/mach-omap/omap3_clock.c
@@ -627,6 +627,11 @@ void prcm_init(void)
init_mpu_dpll_34x(cpu_rev, clk_index);
init_iva_dpll_34x(cpu_rev, clk_index);
}
+ else if (cpu_type == CPU_AM35XX) {
+ init_core_dpll_34x(cpu_rev, clk_index);
+ init_per_dpll_34x(cpu_rev, clk_index);
+ init_mpu_dpll_34x(cpu_rev, clk_index);
+ }
else if (cpu_type == CPU_3630) {
init_core_dpll_36x(cpu_rev, clk_index);
init_per_dpll_36x(cpu_rev, clk_index);
@@ -667,6 +672,10 @@ void prcm_init(void)
*/
static void per_clocks_enable(void)
{
+#ifdef CONFIG_OMAP_CLOCK_ALL
+ u32 cpu_type = get_cpu_type();
+#endif
+
/* Enable GP2 timer. */
sr32(CM_REG(CLKSEL_PER), 0, 1, 0x1); /* GPT2 = sys clk */
sr32(CM_REG(ICLKEN_PER), 3, 1, 0x1); /* ICKen GPT2 */
@@ -713,7 +722,8 @@ static void per_clocks_enable(void)
#define ICK_CAM_ON 0x00000001
#define FCK_PER_ON 0x0003ffff
#define ICK_PER_ON 0x0003ffff
- sr32(CM_REG(FCLKEN_IVA2), 0, 32, FCK_IVA2_ON);
+ if (cpu_type != CPU_AM35XX) /* AM35xx has no IVA */
+ sr32(CM_REG(FCLKEN_IVA2), 0, 32, FCK_IVA2_ON);
sr32(CM_REG(FCLKEN1_CORE), 0, 32, FCK_CORE1_ON);
sr32(CM_REG(ICLKEN1_CORE), 0, 32, ICK_CORE1_ON);
sr32(CM_REG(ICLKEN2_CORE), 0, 32, ICK_CORE2_ON);
@@ -721,8 +731,10 @@ static void per_clocks_enable(void)
sr32(CM_REG(ICLKEN_WKUP), 0, 32, ICK_WKUP_ON);
sr32(CM_REG(FCLKEN_DSS), 0, 32, FCK_DSS_ON);
sr32(CM_REG(ICLKEN_DSS), 0, 32, ICK_DSS_ON);
- sr32(CM_REG(FCLKEN_CAM), 0, 32, FCK_CAM_ON);
- sr32(CM_REG(ICLKEN_CAM), 0, 32, ICK_CAM_ON);
+ if (cpu_type != CPU_AM35XX) { /* AM35xx has no CAM */
+ sr32(CM_REG(FCLKEN_CAM), 0, 32, FCK_CAM_ON);
+ sr32(CM_REG(ICLKEN_CAM), 0, 32, ICK_CAM_ON);
+ }
sr32(CM_REG(FCLKEN_PER), 0, 32, FCK_PER_ON);
sr32(CM_REG(ICLKEN_PER), 0, 32, ICK_PER_ON);
#endif
diff --git a/arch/arm/mach-omap/omap3_generic.c b/arch/arm/mach-omap/omap3_generic.c
index 4ab265a..662995d 100644
--- a/arch/arm/mach-omap/omap3_generic.c
+++ b/arch/arm/mach-omap/omap3_generic.c
@@ -82,6 +82,9 @@ u32 get_cpu_type(void)
if (hawkeye == OMAP_HAWKEYE_34XX)
return CPU_3430;
+ if (hawkeye == OMAP_HAWKEYE_AM35XX)
+ return CPU_AM35XX;
+
if (hawkeye == OMAP_HAWKEYE_36XX)
return CPU_3630;
@@ -125,6 +128,10 @@ u32 get_cpu_rev(void)
retval = OMAP36XX_ES1_2;
}
break;
+ case CPU_AM35XX:
+ /*
+ * Same as default case
+ */
case CPU_3430:
/*
* Same as default case
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-08-20 14:21 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-20 14:20 Jan Luebbe
2012-08-20 14:20 ` [PATCH 01/13] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-08-20 14:20 ` [PATCH 02/13] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-08-20 14:40 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:51 ` Jan Luebbe
2012-08-21 13:04 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 03/13] common: split out meminfo output and make it optional Jan Luebbe
2012-08-20 14:42 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:55 ` Jan Luebbe
2012-08-20 14:20 ` [PATCH 04/13] omap: add SPI as a boot mode for xload Jan Luebbe
2012-08-20 14:20 ` [PATCH 05/13] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-08-20 14:20 ` [PATCH 06/13] drivers/net: add driver for the EMAC device found in some TI SoCs Jan Luebbe
2012-08-20 14:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 6:59 ` Jan Luebbe
2012-08-21 12:16 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 07/13] omap3: allow enabling clocks for UART3, MMC1 and SPI Jan Luebbe
2012-08-20 14:47 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 7:08 ` Jan Luebbe
2012-08-21 12:15 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 08/13] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs Jan Luebbe
2012-08-20 14:58 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-21 7:16 ` Jan Luebbe
2012-08-21 12:14 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 09/13] m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-08-20 14:20 ` [PATCH 10/13] defaultenv: support NAND and NOR kernel partitions at the same time Jan Luebbe
2012-08-20 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 11/13] defaultenv: use /env/oftree if it exists Jan Luebbe
2012-08-20 15:00 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` [PATCH 12/13] defaultenv: support kernel and oftree on a filesystem Jan Luebbe
2012-08-20 15:00 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-20 14:20 ` Jan Luebbe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345472428-17417-14-git-send-email-jlu@pengutronix.de \
--to=jlu@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox