From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 7/7] smm911x: check if the device is ready before using it
Date: Wed, 29 Aug 2012 07:06:18 +0200 [thread overview]
Message-ID: <1346216778-14100-7-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1346216778-14100-1-git-send-email-plagnioj@jcrosoft.com>
poll the READY bit in PMT_CTRL. Any other access to the device is
forbidden while this bit isn't set. Try for 100ms
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/net/smc911x.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index cfcd83f..3695d32 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -422,6 +422,7 @@ static int smc911x_probe(struct device_d *dev)
uint32_t val;
int is_32bit;
struct smc911x_plat *pdata = dev->platform_data;
+ unsigned int to = 100;
priv = xzalloc(sizeof(*priv));
is_32bit = dev->resource[0].flags & IORESOURCE_MEM_TYPE_MASK;
@@ -452,6 +453,17 @@ static int smc911x_probe(struct device_d *dev)
}
}
+ /*
+ * poll the READY bit in PMT_CTRL. Any other access to the device is
+ * forbidden while this bit isn't set. Try for 100ms
+ */
+ while (!(smc911x_reg_read(priv, PMT_CTRL) & PMT_CTRL_READY) && --to)
+ udelay(1000);
+ if (to == 0) {
+ dev_err(dev, "Device not READY in 100ms aborting\n");
+ return -ENODEV;
+ }
+
val = smc911x_reg_read(priv, BYTE_TEST);
if (val == 0x43218765) {
dev_info(dev, "BYTE_TEST looks swapped, "
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-29 5:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-29 4:27 [PATCH 0/7 2] smsc911x: runtime configuration improvement Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 2/7] smc911x: introduce read/write ops Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 3/7] smc911x: add 16bit bus width support Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 4/7] smc911x: add support to pass the shift via platform data Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` [PATCH 5/7] smc911x: improve detection handle Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 6:52 ` Sascha Hauer
2012-08-29 8:36 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 9:04 ` Sascha Hauer
2012-08-29 5:06 ` [PATCH 6/7] smc911x: update chip detection Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 5:06 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-08-29 6:53 ` [PATCH 7/7] smm911x: check if the device is ready before using it Sascha Hauer
2012-08-29 8:35 ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-29 9:04 ` Sascha Hauer
2012-08-29 10:07 ` Christian Hemp
-- strict thread matches above, loose matches on Subject: below --
2012-08-14 17:25 [PATCH 0/7] smsc911x: runtime configuration improvement Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:32 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:32 ` [PATCH 7/7] smm911x: check if the device is ready before using it Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346216778-14100-7-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox