From: Renaud Barbier <renaud.barbier@ge.com>
To: barebox@lists.infradead.org
Subject: [PATCH 4/6] IMX driver: replace imx -> fsl
Date: Fri, 31 Aug 2012 15:10:33 +0100 [thread overview]
Message-ID: <1346422235-3949-5-git-send-email-renaud.barbier@ge.com> (raw)
In-Reply-To: <1346335217-9686-1-git-send-email-renaud.barbier@ge.com>
The IMX i2c driver is to be used by SOCs on both the ARM and PPC architetures.
Use a more neutral name for the structure, function names and #define.
The driver name is now "i2c-fsl".
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
---
drivers/i2c/busses/i2c-imx.c | 235 +++++++++++++++++++++---------------------
1 files changed, 118 insertions(+), 117 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index da6218f..8bbe87b 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1,4 +1,5 @@
/*
+ * Copyright 2012 GE Intelligent Platforms, Inc
* Copyright (C) 2002 Motorola GSG-China
* 2009 Marc Kleine-Budde, Pengutronix
*
@@ -50,19 +51,19 @@
#include <mach/clock.h>
/* This will be the driver name */
-#define DRIVER_NAME "i2c-imx"
+#define DRIVER_NAME "i2c-fsl"
/* Default value */
-#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
+#define FSL_I2C_BIT_RATE 100000 /* 100kHz */
-/* IMX I2C registers */
-#define IMX_I2C_IADR 0x00 /* i2c slave address */
-#define IMX_I2C_IFDR 0x04 /* i2c frequency divider */
-#define IMX_I2C_I2CR 0x08 /* i2c control */
-#define IMX_I2C_I2SR 0x0C /* i2c status */
-#define IMX_I2C_I2DR 0x10 /* i2c transfer data */
+/* FSL I2C registers */
+#define FSL_I2C_IADR 0x00 /* i2c slave address */
+#define FSL_I2C_IFDR 0x04 /* i2c frequency divider */
+#define FSL_I2C_I2CR 0x08 /* i2c control */
+#define FSL_I2C_I2SR 0x0C /* i2c status */
+#define FSL_I2C_I2DR 0x10 /* i2c transfer data */
-/* Bits of IMX I2C registers */
+/* Bits of FSL I2C registers */
#define I2SR_RXAK 0x01
#define I2SR_IIF 0x02
#define I2SR_SRW 0x04
@@ -101,23 +102,23 @@ static u16 i2c_clk_div[50][2] = {
{ 3072, 0x1E }, { 3840, 0x1F }
};
-struct imx_i2c_struct {
+struct fsl_i2c_struct {
void __iomem *base;
struct i2c_adapter adapter;
unsigned int disable_delay;
int stopped;
- unsigned int ifdr; /* IMX_I2C_IFDR */
+ unsigned int ifdr; /* FSL_I2C_IFDR */
};
-#define to_imx_i2c_struct(a) container_of(a, struct imx_i2c_struct, adapter)
+#define to_fsl_i2c_struct(a) container_of(a, struct fsl_i2c_struct, adapter)
#ifdef CONFIG_I2C_DEBUG
-static void i2c_imx_dump_reg(struct i2c_adapter *adapter)
+static void i2c_fsl_dump_reg(struct i2c_adapter *adapter)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
u32 reg_cr, reg_sr;
- reg_cr = readb(i2c_imx->base + IMX_I2C_I2CR);
- reg_sr = readb(i2c_imx->base + IMX_I2C_I2SR);
+ reg_cr = readb(i2c_fsl->base + FSL_I2C_I2CR);
+ reg_sr = readb(i2c_fsl->base + FSL_I2C_I2SR);
dev_dbg(adapter->dev, "CONTROL:\t"
"IEN =%d, IIEN=%d, MSTA=%d, MTX =%d, TXAK=%d, RSTA=%d\n",
@@ -133,22 +134,22 @@ static void i2c_imx_dump_reg(struct i2c_adapter *adapter)
(reg_sr & I2SR_RXAK ? 1 : 0));
}
#else
-static inline void i2c_imx_dump_reg(struct i2c_adapter *adapter)
+static inline void i2c_fsl_dump_reg(struct i2c_adapter *adapter)
{
return;
}
#endif
-static int i2c_imx_bus_busy(struct i2c_adapter *adapter, int for_busy)
+static int i2c_fsl_bus_busy(struct i2c_adapter *adapter, int for_busy)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
uint64_t start;
unsigned int temp;
start = get_time_ns();
while (1) {
- temp = readb(base + IMX_I2C_I2SR);
+ temp = readb(base + FSL_I2C_I2SR);
if (for_busy && (temp & I2SR_IBB))
break;
if (!for_busy && !(temp & I2SR_IBB))
@@ -164,15 +165,15 @@ static int i2c_imx_bus_busy(struct i2c_adapter *adapter, int for_busy)
return 0;
}
-static int i2c_imx_trx_complete(struct i2c_adapter *adapter)
+static int i2c_fsl_trx_complete(struct i2c_adapter *adapter)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
uint64_t start;
start = get_time_ns();
while (1) {
- unsigned int reg = readb(base + IMX_I2C_I2SR);
+ unsigned int reg = readb(base + FSL_I2C_I2SR);
if (reg & I2SR_IIF)
break;
@@ -181,20 +182,20 @@ static int i2c_imx_trx_complete(struct i2c_adapter *adapter)
return -EIO;
}
}
- writeb(0, base + IMX_I2C_I2SR);
+ writeb(0, base + FSL_I2C_I2SR);
return 0;
}
-static int i2c_imx_acked(struct i2c_adapter *adapter)
+static int i2c_fsl_acked(struct i2c_adapter *adapter)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
uint64_t start;
start = get_time_ns();
while (1) {
- unsigned int reg = readb(base + IMX_I2C_I2SR);
+ unsigned int reg = readb(base + FSL_I2C_I2SR);
if (!(reg & I2SR_RXAK))
break;
@@ -207,71 +208,71 @@ static int i2c_imx_acked(struct i2c_adapter *adapter)
return 0;
}
-static int i2c_imx_start(struct i2c_adapter *adapter)
+static int i2c_fsl_start(struct i2c_adapter *adapter)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
unsigned int temp = 0;
int result;
- writeb(i2c_imx->ifdr, base + IMX_I2C_IFDR);
+ writeb(i2c_fsl->ifdr, base + FSL_I2C_IFDR);
/* Enable I2C controller */
- writeb(0, base + IMX_I2C_I2SR);
- writeb(I2CR_IEN, base + IMX_I2C_I2CR);
+ writeb(0, base + FSL_I2C_I2SR);
+ writeb(I2CR_IEN, base + FSL_I2C_I2CR);
/* Wait controller to be stable */
udelay(100);
/* Start I2C transaction */
- temp = readb(base + IMX_I2C_I2CR);
+ temp = readb(base + FSL_I2C_I2CR);
temp |= I2CR_MSTA;
- writeb(temp, base + IMX_I2C_I2CR);
+ writeb(temp, base + FSL_I2C_I2CR);
- result = i2c_imx_bus_busy(adapter, 1);
+ result = i2c_fsl_bus_busy(adapter, 1);
if (result)
return result;
- i2c_imx->stopped = 0;
+ i2c_fsl->stopped = 0;
temp |= I2CR_MTX | I2CR_TXAK;
- writeb(temp, base + IMX_I2C_I2CR);
+ writeb(temp, base + FSL_I2C_I2CR);
return result;
}
-static void i2c_imx_stop(struct i2c_adapter *adapter)
+static void i2c_fsl_stop(struct i2c_adapter *adapter)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
unsigned int temp = 0;
- if (!i2c_imx->stopped) {
+ if (!i2c_fsl->stopped) {
/* Stop I2C transaction */
- temp = readb(base + IMX_I2C_I2CR);
+ temp = readb(base + FSL_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
- writeb(temp, base + IMX_I2C_I2CR);
+ writeb(temp, base + FSL_I2C_I2CR);
/* wait for the stop condition to be send, otherwise the i2c
* controller is disabled before the STOP is sent completely */
- i2c_imx->stopped = i2c_imx_bus_busy(adapter, 0) ? 0 : 1;
+ i2c_fsl->stopped = i2c_fsl_bus_busy(adapter, 0) ? 0 : 1;
}
if (cpu_is_mx1()) {
/*
* This delay caused by an i.MXL hardware bug.
* If no (or too short) delay, no "STOP" bit will be generated.
*/
- udelay(i2c_imx->disable_delay);
+ udelay(i2c_fsl->disable_delay);
}
- if (!i2c_imx->stopped) {
- i2c_imx_bus_busy(adapter, 0);
- i2c_imx->stopped = 1;
+ if (!i2c_fsl->stopped) {
+ i2c_fsl_bus_busy(adapter, 0);
+ i2c_fsl->stopped = 1;
}
/* Disable I2C controller, and force our state to stopped */
- writeb(0, base + IMX_I2C_I2CR);
+ writeb(0, base + FSL_I2C_I2CR);
}
-static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
+static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
unsigned int rate)
{
unsigned int i2c_clk_rate;
@@ -279,7 +280,7 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
int i;
/* Divider value calculation */
- i2c_clk_rate = imx_get_i2cclk();
+ i2c_clk_rate = fsl_get_i2cclk();
div = (i2c_clk_rate + rate - 1) / rate;
if (div < i2c_clk_div[0][0])
i = 0;
@@ -290,7 +291,7 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
;
/* Store divider value */
- i2c_imx->ifdr = i2c_clk_div[i][1];
+ i2c_fsl->ifdr = i2c_clk_div[i][1];
/*
* There dummy delay is calculated.
@@ -298,20 +299,20 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
* This delay is used in I2C bus disable function
* to fix chip hardware bug.
*/
- i2c_imx->disable_delay =
+ i2c_fsl->disable_delay =
(500000U * i2c_clk_div[i][0] + (i2c_clk_rate / 2) - 1) /
(i2c_clk_rate / 2);
- dev_dbg(i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
+ dev_dbg(i2c_fsl->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
__func__, i2c_clk_rate, div);
- dev_dbg(i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
+ dev_dbg(i2c_fsl->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
__func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
}
-static int i2c_imx_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
+static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
int i, result;
if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
@@ -320,12 +321,12 @@ static int i2c_imx_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
__func__, msgs->addr << 1);
/* write slave address */
- writeb(msgs->addr << 1, base + IMX_I2C_I2DR);
+ writeb(msgs->addr << 1, base + FSL_I2C_I2DR);
- result = i2c_imx_trx_complete(adapter);
+ result = i2c_fsl_trx_complete(adapter);
if (result)
return result;
- result = i2c_imx_acked(adapter);
+ result = i2c_fsl_acked(adapter);
if (result)
return result;
}
@@ -335,27 +336,27 @@ static int i2c_imx_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
dev_dbg(adapter->dev,
"<%s> write byte: B%d=0x%02X\n",
__func__, i, msgs->buf[i]);
- writeb(msgs->buf[i], base + IMX_I2C_I2DR);
+ writeb(msgs->buf[i], base + FSL_I2C_I2DR);
- result = i2c_imx_trx_complete(adapter);
+ result = i2c_fsl_trx_complete(adapter);
if (result)
return result;
- result = i2c_imx_acked(adapter);
+ result = i2c_fsl_acked(adapter);
if (result)
return result;
}
return 0;
}
-static int i2c_imx_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
+static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
int i, result;
unsigned int temp;
/* clear IIF */
- writeb(0x0, base + IMX_I2C_I2SR);
+ writeb(0x0, base + FSL_I2C_I2SR);
if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
dev_dbg(adapter->dev,
@@ -363,28 +364,28 @@ static int i2c_imx_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
__func__, (msgs->addr << 1) | 0x01);
/* write slave address */
- writeb((msgs->addr << 1) | 0x01, base + IMX_I2C_I2DR);
+ writeb((msgs->addr << 1) | 0x01, base + FSL_I2C_I2DR);
- result = i2c_imx_trx_complete(adapter);
+ result = i2c_fsl_trx_complete(adapter);
if (result)
return result;
- result = i2c_imx_acked(adapter);
+ result = i2c_fsl_acked(adapter);
if (result)
return result;
}
/* setup bus to read data */
- temp = readb(base + IMX_I2C_I2CR);
+ temp = readb(base + FSL_I2C_I2CR);
temp &= ~I2CR_MTX;
if (msgs->len - 1)
temp &= ~I2CR_TXAK;
- writeb(temp, base + IMX_I2C_I2CR);
+ writeb(temp, base + FSL_I2C_I2CR);
- readb(base + IMX_I2C_I2DR); /* dummy read */
+ readb(base + FSL_I2C_I2DR); /* dummy read */
/* read data */
for (i = 0; i < msgs->len; i++) {
- result = i2c_imx_trx_complete(adapter);
+ result = i2c_fsl_trx_complete(adapter);
if (result)
return result;
@@ -393,23 +394,23 @@ static int i2c_imx_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
* It must generate STOP before read I2DR to prevent
* controller from generating another clock cycle
*/
- temp = readb(base + IMX_I2C_I2CR);
+ temp = readb(base + FSL_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
- writeb(temp, base + IMX_I2C_I2CR);
+ writeb(temp, base + FSL_I2C_I2CR);
/*
* adding this delay helps on low bitrates
*/
- udelay(i2c_imx->disable_delay);
+ udelay(i2c_fsl->disable_delay);
- i2c_imx_bus_busy(adapter, 0);
- i2c_imx->stopped = 1;
+ i2c_fsl_bus_busy(adapter, 0);
+ i2c_fsl->stopped = 1;
} else if (i == (msgs->len - 2)) {
- temp = readb(base + IMX_I2C_I2CR);
+ temp = readb(base + FSL_I2C_I2CR);
temp |= I2CR_TXAK;
- writeb(temp, base + IMX_I2C_I2CR);
+ writeb(temp, base + FSL_I2C_I2CR);
}
- msgs->buf[i] = readb(base + IMX_I2C_I2DR);
+ msgs->buf[i] = readb(base + FSL_I2C_I2DR);
dev_dbg(adapter->dev, "<%s> read byte: B%d=0x%02X\n",
__func__, i, msgs->buf[i]);
@@ -417,76 +418,76 @@ static int i2c_imx_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
return 0;
}
-static int i2c_imx_xfer(struct i2c_adapter *adapter,
+static int i2c_fsl_xfer(struct i2c_adapter *adapter,
struct i2c_msg *msgs, int num)
{
- struct imx_i2c_struct *i2c_imx = to_imx_i2c_struct(adapter);
- void __iomem *base = i2c_imx->base;
+ struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
+ void __iomem *base = i2c_fsl->base;
unsigned int i, temp;
int result;
/* Start I2C transfer */
- result = i2c_imx_start(adapter);
+ result = i2c_fsl_start(adapter);
if (result)
goto fail0;
/* read/write data */
for (i = 0; i < num; i++) {
if (i && !(msgs[i].flags & I2C_M_DATA_ONLY)) {
- temp = readb(base + IMX_I2C_I2CR);
+ temp = readb(base + FSL_I2C_I2CR);
temp |= I2CR_RSTA;
- writeb(temp, base + IMX_I2C_I2CR);
+ writeb(temp, base + FSL_I2C_I2CR);
- result = i2c_imx_bus_busy(adapter, 1);
+ result = i2c_fsl_bus_busy(adapter, 1);
if (result)
goto fail0;
}
- i2c_imx_dump_reg(adapter);
+ i2c_fsl_dump_reg(adapter);
/* write/read data */
if (msgs[i].flags & I2C_M_RD)
- result = i2c_imx_read(adapter, &msgs[i]);
+ result = i2c_fsl_read(adapter, &msgs[i]);
else
- result = i2c_imx_write(adapter, &msgs[i]);
+ result = i2c_fsl_write(adapter, &msgs[i]);
if (result)
goto fail0;
}
fail0:
/* Stop I2C transfer */
- i2c_imx_stop(adapter);
+ i2c_fsl_stop(adapter);
return (result < 0) ? result : num;
}
-static int __init i2c_imx_probe(struct device_d *pdev)
+static int __init i2c_fsl_probe(struct device_d *pdev)
{
- struct imx_i2c_struct *i2c_imx;
+ struct fsl_i2c_struct *i2c_fsl;
struct i2c_platform_data *pdata;
int ret;
pdata = pdev->platform_data;
- i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
+ i2c_fsl = kzalloc(sizeof(struct fsl_i2c_struct), GFP_KERNEL);
- /* Setup i2c_imx driver structure */
- i2c_imx->adapter.master_xfer = i2c_imx_xfer;
- i2c_imx->adapter.nr = pdev->id;
- i2c_imx->adapter.dev = pdev;
- i2c_imx->base = dev_request_mem_region(pdev, 0);
+ /* Setup i2c_fsl driver structure */
+ i2c_fsl->adapter.master_xfer = i2c_fsl_xfer;
+ i2c_fsl->adapter.nr = pdev->id;
+ i2c_fsl->adapter.dev = pdev;
+ i2c_fsl->base = dev_request_mem_region(pdev, 0);
/* Set up clock divider */
if (pdata && pdata->bitrate)
- i2c_imx_set_clk(i2c_imx, pdata->bitrate);
+ i2c_fsl_set_clk(i2c_fsl, pdata->bitrate);
else
- i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+ i2c_fsl_set_clk(i2c_fsl, FSL_I2C_BIT_RATE);
/* Set up chip registers to defaults */
- writeb(0, i2c_imx->base + IMX_I2C_I2CR);
- writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+ writeb(0, i2c_fsl->base + FSL_I2C_I2CR);
+ writeb(0, i2c_fsl->base + FSL_I2C_I2SR);
/* Add I2C adapter */
- ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
+ ret = i2c_add_numbered_adapter(&i2c_fsl->adapter);
if (ret < 0) {
dev_err(pdev, "registration failed\n");
goto fail;
@@ -495,17 +496,17 @@ static int __init i2c_imx_probe(struct device_d *pdev)
return 0;
fail:
- kfree(i2c_imx);
+ kfree(i2c_fsl);
return ret;
}
-static struct driver_d i2c_imx_driver = {
- .probe = i2c_imx_probe,
+static struct driver_d i2c_fsl_driver = {
+ .probe = i2c_fsl_probe,
.name = DRIVER_NAME,
};
-static int __init i2c_adap_imx_init(void)
+static int __init i2c_adap_fsl_init(void)
{
- return register_driver(&i2c_imx_driver);
+ return register_driver(&i2c_fsl_driver);
}
-device_initcall(i2c_adap_imx_init);
+device_initcall(i2c_adap_fsl_init);
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-08-31 14:10 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-30 14:00 [PATCH 0/5] IMX i2c driver update for the PPC 85xx Renaud Barbier
2012-08-30 14:00 ` [PATCH 1/5] mpc85xx: i2c frequency Renaud Barbier
2012-08-30 14:00 ` [PATCH 2/5] ppc/asm/fsl_i2c.h is removed Renaud Barbier
2012-08-30 14:00 ` [PATCH 3/5] mpc85xx: header update Renaud Barbier
2012-08-31 7:16 ` Sascha Hauer
2012-08-30 14:00 ` [PATCH 4/5] i2c: adapt the i2c-imx driver to mpc85xx machines Renaud Barbier
2012-08-31 7:24 ` Sascha Hauer
2012-08-30 14:00 ` [PATCH 5/5] ppc: p2020rdb i2c support Renaud Barbier
2012-08-31 14:10 ` [PATCH V2 0/6 ] IMX i2c driver update for the PPC 85xx Renaud Barbier
2012-09-03 7:39 ` Sascha Hauer
2012-08-31 14:10 ` [PATCH 1/6] mpc85xx: i2c frequency Renaud Barbier
2012-08-31 14:10 ` [PATCH 2/6] ppc/asm/fsl_i2c.h is removed Renaud Barbier
2012-08-31 14:10 ` [PATCH 3/6] mpc85xx: header update Renaud Barbier
2012-08-31 14:10 ` Renaud Barbier [this message]
2012-08-31 14:10 ` [PATCH 5/6] i2c: adapt the i2c-imx driver to mpc85xx machines Renaud Barbier
2012-08-31 14:10 ` [PATCH 6/6] ppc: p2020rdb i2c support Renaud Barbier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346422235-3949-5-git-send-email-renaud.barbier@ge.com \
--to=renaud.barbier@ge.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox