mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 6/7] smc911x: update chip detection
Date: Sat,  1 Sep 2012 10:52:43 +0200	[thread overview]
Message-ID: <1346489564-16176-6-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1346489564-16176-1-git-send-email-plagnioj@jcrosoft.com>

Use linux kernel chip detection from 3.5

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/net/smc911x.c |   60 ++++++++++++++++++++++++++++---------------------
 drivers/net/smc911x.h |   13 -----------
 2 files changed, 34 insertions(+), 39 deletions(-)

diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 8528527..7639a92 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -47,29 +47,12 @@ struct smc911x_priv {
 	void __iomem *base;
 
 	int shift;
+	int generation;
 
 	u32 (*reg_read)(struct smc911x_priv *priv, u32 reg);
 	void (*reg_write)(struct smc911x_priv *priv, u32 reg, u32 val);
 };
 
-struct chip_id {
-	u16 id;
-	char *name;
-};
-
-static const struct chip_id chip_ids[] =  {
-	{ CHIP_9115, "LAN9115" },
-	{ CHIP_9116, "LAN9116" },
-	{ CHIP_9117, "LAN9117" },
-	{ CHIP_9118, "LAN9118" },
-	{ CHIP_9215, "LAN9215" },
-	{ CHIP_9216, "LAN9216" },
-	{ CHIP_9217, "LAN9217" },
-	{ CHIP_9218, "LAN9218" },
-	{ CHIP_9221, "LAN9221" },
-	{ 0, NULL },
-};
-
 #define DRIVERNAME "smc911x"
 
 #define __smc_shift(priv, reg) ((reg) << ((priv)->shift))
@@ -437,7 +420,7 @@ static int smc911x_probe(struct device_d *dev)
 	struct eth_device *edev;
 	struct smc911x_priv *priv;
 	uint32_t val;
-	int i, is_32bit;
+	int is_32bit;
 	struct smc911x_plat *pdata = dev->platform_data;
 
 	priv = xzalloc(sizeof(*priv));
@@ -495,16 +478,41 @@ static int smc911x_probe(struct device_d *dev)
 		return -ENODEV;
 	}
 
-	val = smc911x_reg_read(priv, ID_REV) >> 16;
-	for(i = 0; chip_ids[i].id != 0; i++) {
-		if (chip_ids[i].id == val) break;
-	}
-	if (!chip_ids[i].id) {
-		dev_err(dev, "Unknown chip ID %04x\n", val);
+	val = smc911x_reg_read(priv, ID_REV);
+	switch (val & 0xFFFF0000) {
+	case 0x01180000:
+	case 0x01170000:
+	case 0x01160000:
+	case 0x01150000:
+	case 0x218A0000:
+		/* LAN911[5678] family */
+		priv->generation = val & 0x0000FFFF;
+		break;
+
+	case 0x118A0000:
+	case 0x117A0000:
+	case 0x116A0000:
+	case 0x115A0000:
+		/* LAN921[5678] family */
+		priv->generation = 3;
+		break;
+
+	case 0x92100000:
+	case 0x92110000:
+	case 0x92200000:
+	case 0x92210000:
+		/* LAN9210/LAN9211/LAN9220/LAN9221 */
+		priv->generation = 4;
+		break;
+
+	default:
+		dev_err(dev, "LAN911x not identified, idrev: 0x%08X\n",
+			  val);
 		return -ENODEV;
 	}
 
-	dev_info(dev, "detected %s controller\n", chip_ids[i].name);
+	dev_info(dev, "LAN911x identified, idrev: 0x%08X, generation: %d\n",
+		   val, priv->generation);
 
 	edev = &priv->edev;
 	edev->priv = priv;
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index d409247..572c1f8 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -340,16 +340,3 @@
 #define WUCSR_MPR			0x00000020
 #define WUCSR_WAKE_EN			0x00000004
 #define WUCSR_MPEN			0x00000002
-
-/* Chip ID values */
-#define CHIP_9115	0x115
-#define CHIP_9116	0x116
-#define CHIP_9117	0x117
-#define CHIP_9118	0x118
-#define CHIP_9215	0x115a
-#define CHIP_9216	0x116a
-#define CHIP_9217	0x117a
-#define CHIP_9218	0x118a
-#define CHIP_9221	0x9221
-
-
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-09-01  8:52 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-01  8:47 [PATCH 0/7 v3] smsc911x: runtime configuration improvement Jean-Christophe PLAGNIOL-VILLARD
2012-09-01  8:52 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-09-01  8:52   ` [PATCH 2/7] smc911x: introduce read/write ops Jean-Christophe PLAGNIOL-VILLARD
2012-09-01  8:52   ` [PATCH 3/7] smc911x: add 16bit bus width support Jean-Christophe PLAGNIOL-VILLARD
2012-09-01  8:52   ` [PATCH 4/7] smc911x: add support to pass the shift via platform data Jean-Christophe PLAGNIOL-VILLARD
2012-09-01  8:52   ` [PATCH 5/7] smc911x: improve detection handle Jean-Christophe PLAGNIOL-VILLARD
2012-09-01  8:52   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-01  8:52   ` [PATCH 7/7] smc911x: check if the device is ready before using it Jean-Christophe PLAGNIOL-VILLARD
2012-09-03  7:49 ` [PATCH 0/7 v3] smsc911x: runtime configuration improvement Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2012-08-29  4:27 [PATCH 0/7 2] " Jean-Christophe PLAGNIOL-VILLARD
2012-08-29  5:06 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-08-29  5:06   ` [PATCH 6/7] smc911x: update chip detection Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:25 [PATCH 0/7] smsc911x: runtime configuration improvement Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:32 ` [PATCH 1/7] smc911x: move register define to smc911x.h Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 17:32   ` [PATCH 6/7] smc911x: update chip detection Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346489564-16176-6-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox