From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs
Date: Mon, 3 Sep 2012 13:46:03 +0200 [thread overview]
Message-ID: <1346672765-16162-9-git-send-email-jlu@pengutronix.de> (raw)
In-Reply-To: <1346672765-16162-1-git-send-email-jlu@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
arch/arm/mach-omap/include/mach/emac_defs.h | 53 +++
drivers/net/Kconfig | 5 +
drivers/net/Makefile | 1 +
drivers/net/davinci_emac.c | 619 +++++++++++++++++++++++++++
drivers/net/davinci_emac.h | 331 ++++++++++++++
5 files changed, 1009 insertions(+)
create mode 100644 arch/arm/mach-omap/include/mach/emac_defs.h
create mode 100644 drivers/net/davinci_emac.c
create mode 100644 drivers/net/davinci_emac.h
diff --git a/arch/arm/mach-omap/include/mach/emac_defs.h b/arch/arm/mach-omap/include/mach/emac_defs.h
new file mode 100644
index 0000000..ef930fc
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/emac_defs.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ *
+ */
+
+#ifndef _AM3517_EMAC_H_
+#define _AM3517_EMAC_H_
+
+#define EMAC_BASE_ADDR 0x5C010000
+#define EMAC_WRAPPER_BASE_ADDR 0x5C000000
+#define EMAC_WRAPPER_RAM_ADDR 0x5C020000
+#define EMAC_MDIO_BASE_ADDR 0x5C030000
+#define EMAC_HW_RAM_ADDR 0x01E20000
+
+#define EMAC_MDIO_BUS_FREQ 166000000 /* 166 MHZ check */
+#define EMAC_MDIO_CLOCK_FREQ 1000000 /* 2.0 MHz */
+
+/* SOFTRESET macro definition interferes with emac_regs structure definition */
+#undef SOFTRESET
+
+#define DAVINCI_EMAC_VERSION2
+
+#endif /* _AM3517_EMAC_H_ */
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0fa4f14..68c11eb 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -49,6 +49,11 @@ config DRIVER_NET_SMC91111
This option enables support for the SMSC LAN91C111
ethernet chip.
+config DRIVER_NET_DAVINCI_EMAC
+ bool "TI Davinci/OMAP EMAC ethernet driver"
+ depends on ARCH_DAVINCI || ARCH_OMAP3
+ select MIIDEV
+
config DRIVER_NET_DM9K
bool "Davicom dm9k[E|A|B] ethernet driver"
depends on HAS_DM9000
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b589240..0f1363f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o
obj-$(CONFIG_DRIVER_NET_SMC911X) += smc911x.o
obj-$(CONFIG_DRIVER_NET_SMC91111) += smc91111.o
+obj-$(CONFIG_DRIVER_NET_DAVINCI_EMAC) += davinci_emac.o
obj-$(CONFIG_DRIVER_NET_DM9K) += dm9k.o
obj-$(CONFIG_DRIVER_NET_NETX) += netx_eth.o
obj-$(CONFIG_DRIVER_NET_AT91_ETHER) += at91_ether.o
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
new file mode 100644
index 0000000..b9670ca
--- /dev/null
+++ b/drivers/net/davinci_emac.c
@@ -0,0 +1,619 @@
+/*
+ * Copyright (C) 2012 Jan Luebbe <j.luebbe@pengutronix.de>
+ *
+ * Ethernet driver for TI TMS320DM644x (DaVinci) chips.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright
+ * follows:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.c
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot.
+ * ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors
+ *
+ */
+
+#include <common.h>
+#include <io.h>
+#include <clock.h>
+#include <net.h>
+#include <miidev.h>
+#include <malloc.h>
+#include <init.h>
+#include <asm/mmu.h>
+#include <asm/system.h>
+#include <mach/emac_defs.h>
+#include "davinci_emac.h"
+
+struct davinci_emac_priv {
+ struct device_d *dev;
+ struct eth_device edev;
+ struct mii_device miidev;
+ void __iomem *regs;
+
+ /* EMAC Addresses */
+ emac_regs *adap_emac; /* = (emac_regs *)EMAC_BASE_ADDR; */
+ ewrap_regs *adap_ewrap; /* = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; */
+ mdio_regs *adap_mdio; /* = (mdio_regs *)EMAC_MDIO_BASE_ADDR; */
+
+ /* EMAC descriptors */
+ emac_desc *emac_rx_desc; /* = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE); */
+ emac_desc *emac_tx_desc; /* = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE); */
+ emac_desc *emac_rx_active_head; /* = 0; */
+ emac_desc *emac_rx_active_tail; /* = 0; */
+ int emac_rx_queue_active; /* = 0; */
+
+ /* Receive packet buffers */
+ unsigned char *emac_rx_buffers; /* [EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; */
+
+ /* PHY address for a discovered PHY (0xff - not found) */
+ u_int8_t active_phy_addr; /* = 0xff; */
+};
+
+/* davinci_eth_mac_addr[0] goes out on the wire first */
+
+static u_int8_t davinci_eth_mac_addr[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0x00 };
+
+/*
+ * This function must be called before emac_open() if you want to override
+ * the default mac address.
+ */
+void davinci_eth_set_mac_addr(const u_int8_t *addr)
+{
+ int i;
+
+ for (i = 0; i < sizeof(davinci_eth_mac_addr); i++)
+ davinci_eth_mac_addr[i] = addr[i];
+}
+
+#ifdef EMAC_HW_RAM_ADDR
+static inline dv_reg BD_TO_HW(emac_desc *x)
+{
+ if (x == 0)
+ return 0;
+
+ return (dv_reg)(x) - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR;
+}
+
+static inline emac_desc* HW_TO_BD(dv_reg x)
+{
+ if (x == 0)
+ return 0;
+
+ return (emac_desc*)(x - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR);
+}
+#else
+#define BD_TO_HW(x) (x)
+#define HW_TO_BD(x) (x)
+#endif
+
+static void davinci_eth_mdio_enable(struct davinci_emac_priv *priv)
+{
+ u_int32_t clkdiv;
+
+ clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+
+ dev_dbg(priv->dev, "mdio_enable + 0x%08x\n", priv->adap_mdio->CONTROL);
+ writel((clkdiv & 0xff) |
+ MDIO_CONTROL_ENABLE |
+ MDIO_CONTROL_FAULT |
+ MDIO_CONTROL_FAULT_ENABLE,
+ &priv->adap_mdio->CONTROL);
+ dev_dbg(priv->dev, "mdio_enable - 0x%08x\n", priv->adap_mdio->CONTROL);
+
+ while (readl(&priv->adap_mdio->CONTROL) & MDIO_CONTROL_IDLE);
+}
+
+/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
+int davinci_eth_phy_read(struct davinci_emac_priv *priv, u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+{
+ int tmp;
+
+ while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO);
+
+ writel(MDIO_USERACCESS0_GO |
+ MDIO_USERACCESS0_WRITE_READ |
+ ((reg_num & 0x1f) << 21) |
+ ((phy_addr & 0x1f) << 16),
+ &priv->adap_mdio->USERACCESS0);
+
+ /* Wait for command to complete */
+ while ((tmp = readl(&priv->adap_mdio->USERACCESS0)) & MDIO_USERACCESS0_GO);
+
+ if (tmp & MDIO_USERACCESS0_ACK) {
+ *data = tmp & 0xffff;
+ dev_dbg(priv->dev, "emac_phy_read: addr=0x%02x reg=0x%02x data=0x%04x\n",
+ phy_addr, reg_num, *data);
+ return 1;
+ }
+
+ *data = -1;
+ return 0;
+}
+
+/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
+int davinci_eth_phy_write(struct davinci_emac_priv *priv, u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+{
+
+ while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO);
+
+ dev_dbg(priv->dev, "emac_phy_write: addr=0x%02x reg=0x%02x data=0x%04x\n",
+ phy_addr, reg_num, data);
+ writel(MDIO_USERACCESS0_GO |
+ MDIO_USERACCESS0_WRITE_WRITE |
+ ((reg_num & 0x1f) << 21) |
+ ((phy_addr & 0x1f) << 16) |
+ (data & 0xffff),
+ &priv->adap_mdio->USERACCESS0);
+
+ /* Wait for command to complete */
+ while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO);
+
+ return 1;
+}
+
+static int davinci_miidev_read(struct mii_device *dev, int addr, int reg)
+{
+ struct davinci_emac_priv *priv = (struct davinci_emac_priv *)dev->edev->priv;
+ uint16_t value = 0;
+ return davinci_eth_phy_read(priv, addr, reg, &value) ? value : -1;
+}
+
+static int davinci_miidev_write(struct mii_device *dev, int addr, int reg, int value)
+{
+ struct davinci_emac_priv *priv = (struct davinci_emac_priv *)dev->edev->priv;
+ return davinci_eth_phy_write(priv, addr, reg, value) ? 0 : -1;
+}
+
+static int davinci_emac_get_ethaddr(struct eth_device *edev, unsigned char *adr)
+{
+ return -1;
+}
+
+static int davinci_emac_set_ethaddr(struct eth_device *edev, unsigned char *adr)
+{
+ davinci_eth_set_mac_addr(adr);
+ return 0;
+}
+
+static int davinci_emac_init(struct eth_device *edev)
+{
+ dev_dbg(&edev->dev, "* emac_init\n");
+ return 0;
+}
+
+static int davinci_emac_open(struct eth_device *edev)
+{
+ struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+
+ dv_reg_p addr;
+ u_int32_t clkdiv, cnt;
+ emac_desc *rx_desc;
+ unsigned long mac_hi, mac_lo;
+ int ret;
+
+ dev_dbg(priv->dev, "+ emac_open\n");
+
+ dev_dbg(priv->dev, "emac->TXIDVER: 0x%08x\n", priv->adap_emac->TXIDVER);
+ dev_dbg(priv->dev, "emac->RXIDVER: 0x%08x\n", priv->adap_emac->RXIDVER);
+
+ /* Reset EMAC module and disable interrupts in wrapper */
+ writel(1, &priv->adap_emac->SOFTRESET);
+ while (readl(&priv->adap_emac->SOFTRESET) != 0);
+ writel(1, &priv->adap_ewrap->softrst);
+ while (readl(&priv->adap_ewrap->softrst) != 0);
+
+ writel(0, &priv->adap_ewrap->c0rxen);
+ writel(0, &priv->adap_ewrap->c1rxen);
+ writel(0, &priv->adap_ewrap->c2rxen);
+ writel(0, &priv->adap_ewrap->c0txen);
+ writel(0, &priv->adap_ewrap->c1txen);
+ writel(0, &priv->adap_ewrap->c2txen);
+ writel(0, &priv->adap_ewrap->c0miscen);
+ writel(0, &priv->adap_ewrap->c1miscen);
+ writel(0, &priv->adap_ewrap->c2miscen);
+
+ rx_desc = priv->emac_rx_desc;
+
+ /*
+ * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
+ * receive)
+ * Use channel 0 only - other channels are disabled
+ */
+ writel(0, &priv->adap_emac->MACINDEX);
+ mac_hi = (davinci_eth_mac_addr[3] << 24) |
+ (davinci_eth_mac_addr[2] << 16) |
+ (davinci_eth_mac_addr[1] << 8) |
+ (davinci_eth_mac_addr[0]);
+ mac_lo = (davinci_eth_mac_addr[5] << 8) |
+ (davinci_eth_mac_addr[4]);
+
+ writel(mac_hi, &priv->adap_emac->MACADDRHI);
+ writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
+ &priv->adap_emac->MACADDRLO);
+
+ /* Set source MAC address - REQUIRED */
+ writel(mac_hi, &priv->adap_emac->MACSRCADDRHI);
+ writel(mac_lo, &priv->adap_emac->MACSRCADDRLO);
+
+ /* Set DMA 8 TX / 8 RX Head pointers to 0 */
+ addr = &priv->adap_emac->TX0HDP;
+ for(cnt = 0; cnt < 16; cnt++)
+ *addr++ = 0;
+
+ addr = &priv->adap_emac->RX0HDP;
+ for(cnt = 0; cnt < 16; cnt++)
+ *addr++ = 0;
+
+ /* Clear Statistics (do this before setting MacControl register) */
+ addr = &priv->adap_emac->RXGOODFRAMES;
+ for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++)
+ *addr++ = 0;
+
+ /* No multicast addressing */
+ writel(0, &priv->adap_emac->MACHASH1);
+ writel(0, &priv->adap_emac->MACHASH2);
+
+ writel(0x01, &priv->adap_emac->TXCONTROL);
+ writel(0x01, &priv->adap_emac->RXCONTROL);
+
+ /* Create RX queue and set receive process in place */
+ priv->emac_rx_active_head = priv->emac_rx_desc;
+ for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
+ rx_desc->next = BD_TO_HW(rx_desc + 1);
+ rx_desc->buffer = &priv->emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
+ rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
+ rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
+ rx_desc++;
+ }
+
+ /* Set the last descriptor's "next" parameter to 0 to end the RX desc list */
+ rx_desc--;
+ rx_desc->next = 0;
+ priv->emac_rx_active_tail = rx_desc;
+ priv->emac_rx_queue_active = 1;
+
+ /* Enable TX/RX */
+ writel(EMAC_MAX_ETHERNET_PKT_SIZE, &priv->adap_emac->RXMAXLEN);
+ writel(0, &priv->adap_emac->RXBUFFEROFFSET);
+
+ /* No fancy configs - Use this for promiscous for debug - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */
+ writel(EMAC_RXMBPENABLE_RXBROADEN, &priv->adap_emac->RXMBPENABLE);
+
+ /* Enable ch 0 only */
+ writel(0x01, &priv->adap_emac->RXUNICASTSET);
+
+ /* Enable MII interface and full duplex mode (using RMMI) */
+ writel((EMAC_MACCONTROL_MIIEN_ENABLE |
+ EMAC_MACCONTROL_FULLDUPLEX_ENABLE |
+ EMAC_MACCONTROL_RMIISPEED_100),
+ &priv->adap_emac->MACCONTROL);
+
+ /* Init MDIO & get link state */
+ clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+ writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT,
+ &priv->adap_mdio->CONTROL);
+
+ /* Start receive process */
+ writel(BD_TO_HW(priv->emac_rx_desc), &priv->adap_emac->RX0HDP);
+
+ ret = miidev_wait_aneg(&priv->miidev);
+ if (ret)
+ return ret;
+
+ ret = miidev_get_status(&priv->miidev);
+ if (ret < 0)
+ return ret;
+
+ miidev_print_status(&priv->miidev);
+
+ dev_dbg(priv->dev, "- emac_open\n");
+
+ return 0;
+}
+
+/* EMAC Channel Teardown */
+static void davinci_eth_ch_teardown(struct davinci_emac_priv *priv, int ch)
+{
+ dv_reg dly = 0xff;
+ dv_reg cnt;
+
+ dev_dbg(priv->dev, "+ emac_ch_teardown\n");
+
+ if (ch == EMAC_CH_TX) {
+ /* Init TX channel teardown */
+ writel(0, &priv->adap_emac->TXTEARDOWN);
+ for(cnt = 0; cnt != 0xfffffffc; cnt = readl(&priv->adap_emac->TX0CP)) {
+ /* Wait here for Tx teardown completion interrupt to occur
+ * Note: A task delay can be called here to pend rather than
+ * occupying CPU cycles - anyway it has been found that teardown
+ * takes very few cpu cycles and does not affect functionality */
+ dly--;
+ udelay(1);
+ if (dly == 0)
+ break;
+ }
+ writel(cnt, &priv->adap_emac->TX0CP);
+ writel(0, &priv->adap_emac->TX0HDP);
+ } else {
+ /* Init RX channel teardown */
+ writel(0, &priv->adap_emac->RXTEARDOWN);
+ for(cnt = 0; cnt != 0xfffffffc; cnt = readl(&priv->adap_emac->RX0CP)) {
+ /* Wait here for Rx teardown completion interrupt to occur
+ * Note: A task delay can be called here to pend rather than
+ * occupying CPU cycles - anyway it has been found that teardown
+ * takes very few cpu cycles and does not affect functionality */
+ dly--;
+ udelay(1);
+ if (dly == 0)
+ break;
+ }
+ writel(cnt, &priv->adap_emac->RX0CP);
+ writel(0, &priv->adap_emac->RX0HDP);
+ }
+
+ dev_dbg(priv->dev, "- emac_ch_teardown\n");
+}
+
+static void davinci_emac_halt(struct eth_device *edev)
+{
+ struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+
+ dev_dbg(priv->dev, "+ emac_halt\n");
+
+ davinci_eth_ch_teardown(priv, EMAC_CH_TX); /* TX Channel teardown */
+ davinci_eth_ch_teardown(priv, EMAC_CH_RX); /* RX Channel teardown */
+
+ /* Reset EMAC module and disable interrupts in wrapper */
+ writel(1, &priv->adap_emac->SOFTRESET);
+ writel(1, &priv->adap_ewrap->softrst);
+
+ writel(0, &priv->adap_ewrap->c0rxen);
+ writel(0, &priv->adap_ewrap->c1rxen);
+ writel(0, &priv->adap_ewrap->c2rxen);
+ writel(0, &priv->adap_ewrap->c0txen);
+ writel(0, &priv->adap_ewrap->c1txen);
+ writel(0, &priv->adap_ewrap->c2txen);
+ writel(0, &priv->adap_ewrap->c0miscen);
+ writel(0, &priv->adap_ewrap->c1miscen);
+ writel(0, &priv->adap_ewrap->c2miscen);
+
+ dev_dbg(priv->dev, "- emac_halt\n");
+}
+
+/*
+ * This function sends a single packet on the network and returns
+ * positive number (number of bytes transmitted) or negative for error
+ */
+static int davinci_emac_send(struct eth_device *edev, void *packet, int length)
+{
+ struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+ uint64_t start = 0;
+ int ret_status = -1;
+
+ dev_dbg(priv->dev, "+ emac_send (length %d)\n", length);
+
+ /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */
+ if (length < EMAC_MIN_ETHERNET_PKT_SIZE) {
+ length = EMAC_MIN_ETHERNET_PKT_SIZE;
+ }
+
+ /* Populate the TX descriptor */
+ writel(0, &priv->emac_tx_desc->next);
+ writel((u_int8_t *) packet, &priv->emac_tx_desc->buffer);
+ writel((length & 0xffff), &priv->emac_tx_desc->buff_off_len);
+ writel(((length & 0xffff) | EMAC_CPPI_SOP_BIT |
+ EMAC_CPPI_OWNERSHIP_BIT |
+ EMAC_CPPI_EOP_BIT),
+ &priv->emac_tx_desc->pkt_flag_len);
+ dma_flush_range((ulong) packet, (ulong)packet + length);
+ /* Send the packet */
+ writel(BD_TO_HW(priv->emac_tx_desc), &priv->adap_emac->TX0HDP);
+
+ /* Wait for packet to complete or link down */
+ start = get_time_ns();
+ while (1) {
+ if (readl(&priv->adap_emac->TXINTSTATRAW) & 0x01) {
+ /* Acknowledge the TX descriptor */
+ writel(BD_TO_HW(priv->emac_tx_desc), &priv->adap_emac->TX0CP);
+ ret_status = length;
+ break;
+ }
+ }
+
+ dev_dbg(priv->dev, "- emac_send (ret_status %i)\n", ret_status);
+ return ret_status;
+}
+
+/*
+ * This function handles receipt of a packet from the network
+ */
+static int davinci_emac_recv(struct eth_device *edev)
+{
+ struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+ emac_desc *rx_curr_desc;
+ emac_desc *curr_desc;
+ emac_desc *tail_desc;
+ unsigned char *pkt;
+ int status, len, ret = -1;
+
+ dev_dbg(priv->dev, "+ emac_recv\n");
+
+ rx_curr_desc = priv->emac_rx_active_head;
+ status = readl(&rx_curr_desc->pkt_flag_len);
+ if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) {
+ if (status & EMAC_CPPI_RX_ERROR_FRAME) {
+ /* Error in packet - discard it and requeue desc */
+ dev_warn(priv->dev, "WARN: emac_rcv_pkt: Error in packet\n");
+ } else {
+ pkt = (unsigned char *)readl(&rx_curr_desc->buffer);
+ len = readl(&rx_curr_desc->buff_off_len) & 0xffff;
+ dev_dbg(priv->dev, "| emac_recv got packet (length %i)\n", len);
+ dma_inv_range((ulong)pkt,
+ (ulong)rx_curr_desc->buffer + len);
+ net_receive(pkt, len);
+ ret = len;
+ }
+
+ /* Ack received packet descriptor */
+ writel(BD_TO_HW(rx_curr_desc), &priv->adap_emac->RX0CP);
+ curr_desc = rx_curr_desc;
+ priv->emac_rx_active_head = HW_TO_BD(readl(&rx_curr_desc->next));
+
+ if (status & EMAC_CPPI_EOQ_BIT) {
+ if (priv->emac_rx_active_head) {
+ writel(BD_TO_HW(priv->emac_rx_active_head),
+ &priv->adap_emac->RX0HDP);
+ } else {
+ priv->emac_rx_queue_active = 0;
+ dev_info(priv->dev, "INFO:emac_rcv_packet: RX Queue not active\n");
+ }
+ }
+
+ /* Recycle RX descriptor */
+ writel(EMAC_MAX_ETHERNET_PKT_SIZE, &rx_curr_desc->buff_off_len);
+ writel(EMAC_CPPI_OWNERSHIP_BIT, &rx_curr_desc->pkt_flag_len);
+ writel(0, &rx_curr_desc->next);
+
+ if (priv->emac_rx_active_head == 0) {
+ dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue head = 0\n");
+ priv->emac_rx_active_head = curr_desc;
+ priv->emac_rx_active_tail = curr_desc;
+ if (priv->emac_rx_queue_active != 0) {
+ writel(BD_TO_HW(priv->emac_rx_active_head), &priv->adap_emac->RX0HDP);
+ dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
+ priv->emac_rx_queue_active = 1;
+ }
+ } else {
+ tail_desc = priv->emac_rx_active_tail;
+ priv->emac_rx_active_tail = curr_desc;
+ writel(BD_TO_HW(curr_desc), &tail_desc->next);
+ status = readl(&tail_desc->pkt_flag_len);
+ if (status & EMAC_CPPI_EOQ_BIT) {
+ writel(BD_TO_HW(curr_desc), &priv->adap_emac->RX0HDP);
+ status &= ~EMAC_CPPI_EOQ_BIT;
+ writel(status, &tail_desc->pkt_flag_len);
+ }
+ }
+ return ret;
+ }
+
+ dev_dbg(priv->dev, "- emac_recv\n");
+
+ return 0;
+}
+
+static int davinci_emac_probe(struct device_d *dev)
+{
+ struct davinci_emac_priv *priv;
+ int i;
+
+ dev_dbg(dev, "+ emac_probe\n");
+
+ priv = xzalloc(sizeof(*priv));
+ dev->priv = priv;
+
+ priv->dev = dev;
+
+ priv->adap_emac = (emac_regs *)EMAC_BASE_ADDR;
+ priv->adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
+ priv->adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR;
+
+ /* EMAC descriptors */
+ priv->emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE);
+ priv->emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
+ priv->emac_rx_active_head = 0;
+ priv->emac_rx_active_tail = 0;
+ priv->emac_rx_queue_active = 0;
+
+ /* Receive packet buffers */
+ priv->emac_rx_buffers = xmemalign(4096, EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN));
+
+ /* PHY address for a discovered PHY (0xff - not found) */
+ priv->active_phy_addr = 0xff;
+
+ priv->edev.priv = priv;
+ priv->edev.init = davinci_emac_init;
+ priv->edev.open = davinci_emac_open;
+ priv->edev.halt = davinci_emac_halt;
+ priv->edev.send = davinci_emac_send;
+ priv->edev.recv = davinci_emac_recv;
+ priv->edev.get_ethaddr = davinci_emac_get_ethaddr;
+ priv->edev.set_ethaddr = davinci_emac_set_ethaddr;
+ priv->edev.parent = dev;
+
+ priv->regs = dev_request_mem_region(dev, 0);
+
+ davinci_eth_mdio_enable(priv);
+
+ for (i = 0; i < 256; i++) {
+ if (priv->adap_mdio->ALIVE)
+ break;
+ udelay(1000);
+ }
+
+ if (i >= 256) {
+ dev_err(dev, "No ETH PHY detected!\n");
+ }
+
+ priv->miidev.read = davinci_miidev_read;
+ priv->miidev.write = davinci_miidev_write;
+ priv->miidev.address = 0x01;
+ priv->miidev.flags = MIIDEV_FORCE_LINK;
+ priv->miidev.edev = &priv->edev;
+ priv->miidev.parent = dev;
+
+ mii_register(&priv->miidev);
+
+ eth_register(&priv->edev);
+
+ dev_dbg(dev, "- emac_probe\n");
+ return 0;
+}
+
+static void davinci_emac_remove(struct device_d *dev)
+{
+ struct davinci_emac_priv *priv = dev->priv;
+
+ davinci_emac_halt(&priv->edev);
+}
+
+static struct driver_d davinci_emac_driver = {
+ .name = "davinci_emac",
+ .probe = davinci_emac_probe,
+ .remove = davinci_emac_remove,
+};
+
+static int davinci_emac_register(void)
+{
+ register_driver(&davinci_emac_driver);
+ return 0;
+}
+
+device_initcall(davinci_emac_register);
diff --git a/drivers/net/davinci_emac.h b/drivers/net/davinci_emac.h
new file mode 100644
index 0000000..4e97ce5
--- /dev/null
+++ b/drivers/net/davinci_emac.h
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ *
+ */
+
+#ifndef _DAVINCI_EMAC_H_
+#define _DAVINCI_EMAC_H_
+
+/* PHY mask - set only those phy number bits where phy is/can be connected */
+#define EMAC_MDIO_PHY_NUM 1
+#define EMAC_MDIO_PHY_MASK (1 << EMAC_MDIO_PHY_NUM)
+
+/* Ethernet Min/Max packet size */
+#define EMAC_MIN_ETHERNET_PKT_SIZE 60
+#define EMAC_MAX_ETHERNET_PKT_SIZE 1518
+#define EMAC_PKT_ALIGN 18 /* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */
+
+/* Number of RX packet buffers
+ * NOTE: Only 1 buffer supported as of now
+ */
+#define EMAC_MAX_RX_BUFFERS 10
+
+typedef unsigned int dv_reg;
+typedef unsigned int *dv_reg_p;
+
+/***********************************************
+ ******** Internally used macros ***************
+ ***********************************************/
+
+#define EMAC_CH_TX 1
+#define EMAC_CH_RX 0
+
+/* Each descriptor occupies 4 words, lets start RX desc's at 0 and
+ * reserve space for 64 descriptors max
+ */
+#define EMAC_RX_DESC_BASE 0x0
+#define EMAC_TX_DESC_BASE 0x1000
+
+/* EMAC Teardown value */
+#define EMAC_TEARDOWN_VALUE 0xfffffffc
+
+/* MII Status Register */
+#define MII_STATUS_REG 1
+
+/* Number of statistics registers */
+#define EMAC_NUM_STATS 36
+
+
+/* EMAC Descriptor */
+typedef struct
+{
+ u_int32_t next; /* Pointer to next descriptor in chain */
+ u_int8_t *buffer; /* Pointer to data buffer */
+ u_int32_t buff_off_len; /* Buffer Offset(MSW) and Length(LSW) */
+ u_int32_t pkt_flag_len; /* Packet Flags(MSW) and Length(LSW) */
+} emac_desc;
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT (0x80000000)
+#define EMAC_CPPI_EOP_BIT (0x40000000)
+#define EMAC_CPPI_OWNERSHIP_BIT (0x20000000)
+#define EMAC_CPPI_EOQ_BIT (0x10000000)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT (0x08000000)
+#define EMAC_CPPI_PASS_CRC_BIT (0x04000000)
+
+#define EMAC_CPPI_RX_ERROR_FRAME (0x03fc0000)
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20)
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1)
+#define EMAC_MACCONTROL_GIGABIT_ENABLE (1 << 7)
+#define EMAC_MACCONTROL_GIGFORCE (1 << 17)
+#define EMAC_MACCONTROL_RMIISPEED_100 (1 << 15)
+
+#define EMAC_MAC_ADDR_MATCH (1 << 19)
+#define EMAC_MAC_ADDR_IS_VALID (1 << 20)
+
+#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE (0x200000)
+#define EMAC_RXMBPENABLE_RXBROADEN (0x2000)
+
+
+#define MDIO_CONTROL_IDLE (0x80000000)
+#define MDIO_CONTROL_ENABLE (0x40000000)
+#define MDIO_CONTROL_FAULT_ENABLE (0x40000)
+#define MDIO_CONTROL_FAULT (0x80000)
+#define MDIO_USERACCESS0_GO (0x80000000)
+#define MDIO_USERACCESS0_WRITE_READ (0x0)
+#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000)
+#define MDIO_USERACCESS0_ACK (0x20000000)
+
+/* Ethernet MAC Registers Structure */
+typedef struct {
+ dv_reg TXIDVER;
+ dv_reg TXCONTROL;
+ dv_reg TXTEARDOWN;
+ u_int8_t RSVD0[4];
+ dv_reg RXIDVER;
+ dv_reg RXCONTROL;
+ dv_reg RXTEARDOWN;
+ u_int8_t RSVD1[100];
+ dv_reg TXINTSTATRAW;
+ dv_reg TXINTSTATMASKED;
+ dv_reg TXINTMASKSET;
+ dv_reg TXINTMASKCLEAR;
+ dv_reg MACINVECTOR;
+ u_int8_t RSVD2[12];
+ dv_reg RXINTSTATRAW;
+ dv_reg RXINTSTATMASKED;
+ dv_reg RXINTMASKSET;
+ dv_reg RXINTMASKCLEAR;
+ dv_reg MACINTSTATRAW;
+ dv_reg MACINTSTATMASKED;
+ dv_reg MACINTMASKSET;
+ dv_reg MACINTMASKCLEAR;
+ u_int8_t RSVD3[64];
+ dv_reg RXMBPENABLE;
+ dv_reg RXUNICASTSET;
+ dv_reg RXUNICASTCLEAR;
+ dv_reg RXMAXLEN;
+ dv_reg RXBUFFEROFFSET;
+ dv_reg RXFILTERLOWTHRESH;
+ u_int8_t RSVD4[8];
+ dv_reg RX0FLOWTHRESH;
+ dv_reg RX1FLOWTHRESH;
+ dv_reg RX2FLOWTHRESH;
+ dv_reg RX3FLOWTHRESH;
+ dv_reg RX4FLOWTHRESH;
+ dv_reg RX5FLOWTHRESH;
+ dv_reg RX6FLOWTHRESH;
+ dv_reg RX7FLOWTHRESH;
+ dv_reg RX0FREEBUFFER;
+ dv_reg RX1FREEBUFFER;
+ dv_reg RX2FREEBUFFER;
+ dv_reg RX3FREEBUFFER;
+ dv_reg RX4FREEBUFFER;
+ dv_reg RX5FREEBUFFER;
+ dv_reg RX6FREEBUFFER;
+ dv_reg RX7FREEBUFFER;
+ dv_reg MACCONTROL;
+ dv_reg MACSTATUS;
+ dv_reg EMCONTROL;
+ dv_reg FIFOCONTROL;
+ dv_reg MACCONFIG;
+ dv_reg SOFTRESET;
+ u_int8_t RSVD5[88];
+ dv_reg MACSRCADDRLO;
+ dv_reg MACSRCADDRHI;
+ dv_reg MACHASH1;
+ dv_reg MACHASH2;
+ dv_reg BOFFTEST;
+ dv_reg TPACETEST;
+ dv_reg RXPAUSE;
+ dv_reg TXPAUSE;
+ u_int8_t RSVD6[16];
+ dv_reg RXGOODFRAMES;
+ dv_reg RXBCASTFRAMES;
+ dv_reg RXMCASTFRAMES;
+ dv_reg RXPAUSEFRAMES;
+ dv_reg RXCRCERRORS;
+ dv_reg RXALIGNCODEERRORS;
+ dv_reg RXOVERSIZED;
+ dv_reg RXJABBER;
+ dv_reg RXUNDERSIZED;
+ dv_reg RXFRAGMENTS;
+ dv_reg RXFILTERED;
+ dv_reg RXQOSFILTERED;
+ dv_reg RXOCTETS;
+ dv_reg TXGOODFRAMES;
+ dv_reg TXBCASTFRAMES;
+ dv_reg TXMCASTFRAMES;
+ dv_reg TXPAUSEFRAMES;
+ dv_reg TXDEFERRED;
+ dv_reg TXCOLLISION;
+ dv_reg TXSINGLECOLL;
+ dv_reg TXMULTICOLL;
+ dv_reg TXEXCESSIVECOLL;
+ dv_reg TXLATECOLL;
+ dv_reg TXUNDERRUN;
+ dv_reg TXCARRIERSENSE;
+ dv_reg TXOCTETS;
+ dv_reg FRAME64;
+ dv_reg FRAME65T127;
+ dv_reg FRAME128T255;
+ dv_reg FRAME256T511;
+ dv_reg FRAME512T1023;
+ dv_reg FRAME1024TUP;
+ dv_reg NETOCTETS;
+ dv_reg RXSOFOVERRUNS;
+ dv_reg RXMOFOVERRUNS;
+ dv_reg RXDMAOVERRUNS;
+ u_int8_t RSVD7[624];
+ dv_reg MACADDRLO;
+ dv_reg MACADDRHI;
+ dv_reg MACINDEX;
+ u_int8_t RSVD8[244];
+ dv_reg TX0HDP;
+ dv_reg TX1HDP;
+ dv_reg TX2HDP;
+ dv_reg TX3HDP;
+ dv_reg TX4HDP;
+ dv_reg TX5HDP;
+ dv_reg TX6HDP;
+ dv_reg TX7HDP;
+ dv_reg RX0HDP;
+ dv_reg RX1HDP;
+ dv_reg RX2HDP;
+ dv_reg RX3HDP;
+ dv_reg RX4HDP;
+ dv_reg RX5HDP;
+ dv_reg RX6HDP;
+ dv_reg RX7HDP;
+ dv_reg TX0CP;
+ dv_reg TX1CP;
+ dv_reg TX2CP;
+ dv_reg TX3CP;
+ dv_reg TX4CP;
+ dv_reg TX5CP;
+ dv_reg TX6CP;
+ dv_reg TX7CP;
+ dv_reg RX0CP;
+ dv_reg RX1CP;
+ dv_reg RX2CP;
+ dv_reg RX3CP;
+ dv_reg RX4CP;
+ dv_reg RX5CP;
+ dv_reg RX6CP;
+ dv_reg RX7CP;
+} emac_regs;
+
+/* EMAC Wrapper Registers Structure */
+typedef struct {
+#ifdef DAVINCI_EMAC_VERSION2
+ dv_reg idver;
+ dv_reg softrst;
+ dv_reg emctrl;
+ dv_reg c0rxthreshen;
+ dv_reg c0rxen;
+ dv_reg c0txen;
+ dv_reg c0miscen;
+ dv_reg c1rxthreshen;
+ dv_reg c1rxen;
+ dv_reg c1txen;
+ dv_reg c1miscen;
+ dv_reg c2rxthreshen;
+ dv_reg c2rxen;
+ dv_reg c2txen;
+ dv_reg c2miscen;
+ dv_reg c0rxthreshstat;
+ dv_reg c0rxstat;
+ dv_reg c0txstat;
+ dv_reg c0miscstat;
+ dv_reg c1rxthreshstat;
+ dv_reg c1rxstat;
+ dv_reg c1txstat;
+ dv_reg c1miscstat;
+ dv_reg c2rxthreshstat;
+ dv_reg c2rxstat;
+ dv_reg c2txstat;
+ dv_reg c2miscstat;
+ dv_reg c0rximax;
+ dv_reg c0tximax;
+ dv_reg c1rximax;
+ dv_reg c1tximax;
+ dv_reg c2rximax;
+ dv_reg c2tximax;
+#else
+ u_int8_t RSVD0[4100];
+ dv_reg EWCTL;
+ dv_reg EWINTTCNT;
+#endif
+} ewrap_regs;
+
+/* EMAC MDIO Registers Structure */
+typedef struct {
+ dv_reg VERSION;
+ dv_reg CONTROL;
+ dv_reg ALIVE;
+ dv_reg LINK;
+ dv_reg LINKINTRAW;
+ dv_reg LINKINTMASKED;
+ u_int8_t RSVD0[8];
+ dv_reg USERINTRAW;
+ dv_reg USERINTMASKED;
+ dv_reg USERINTMASKSET;
+ dv_reg USERINTMASKCLEAR;
+ u_int8_t RSVD1[80];
+ dv_reg USERACCESS0;
+ dv_reg USERPHYSEL0;
+ dv_reg USERACCESS1;
+ dv_reg USERPHYSEL1;
+} mdio_regs;
+
+typedef struct
+{
+ char name[64];
+ int (*init)(int phy_addr);
+ int (*is_phy_connected)(int phy_addr);
+ int (*get_link_speed)(int phy_addr);
+ int (*auto_negotiate)(int phy_addr);
+} phy_t;
+
+#endif /* _DAVINCI_EMAC_H_ */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-09-03 11:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-03 11:45 Prepare support for TI AM35xx Jan Luebbe
2012-09-03 11:45 ` [PATCH 01/10] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-09-03 11:45 ` [PATCH 02/10] drivers/nor/m25p80: add MEMGETINFO ioctl Jan Luebbe
2012-09-04 8:20 ` Sascha Hauer
2012-09-03 11:45 ` [PATCH 03/10] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-09-03 16:22 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-03 11:45 ` [PATCH 04/10] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-09-04 8:27 ` Sascha Hauer
2012-09-03 11:46 ` [PATCH 05/10] common: split out meminfo output and make it optional Jan Luebbe
2012-09-03 11:46 ` [PATCH 06/10] omap: add SPI as a boot mode for xload Jan Luebbe
2012-09-03 16:24 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 7:41 ` Jan Weitzel
2012-09-03 11:46 ` [PATCH 07/10] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-09-03 11:46 ` Jan Luebbe [this message]
2012-09-03 16:27 ` [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 8:42 ` Sascha Hauer
2012-09-03 11:46 ` [PATCH 09/10] omap3: allow enabling clocks for UART3, MMC1 and SPI Jan Luebbe
2012-09-04 8:48 ` Sascha Hauer
2012-09-05 9:28 ` Jan Lübbe
2012-09-03 11:46 ` [PATCH 10/10] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs Jan Luebbe
2012-09-03 16:32 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-04 8:58 ` Sascha Hauer
2012-09-05 9:20 ` Jan Lübbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346672765-16162-9-git-send-email-jlu@pengutronix.de \
--to=jlu@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox