mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs
Date: Wed,  5 Sep 2012 17:52:14 +0200	[thread overview]
Message-ID: <1346860337-777-7-git-send-email-jlu@pengutronix.de> (raw)
In-Reply-To: <1346860337-777-1-git-send-email-jlu@pengutronix.de>

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
 arch/arm/mach-omap/include/mach/emac_defs.h |   53 +++
 drivers/net/Kconfig                         |    5 +
 drivers/net/Makefile                        |    1 +
 drivers/net/davinci_emac.c                  |  615 +++++++++++++++++++++++++++
 drivers/net/davinci_emac.h                  |  318 ++++++++++++++
 5 files changed, 992 insertions(+)
 create mode 100644 arch/arm/mach-omap/include/mach/emac_defs.h
 create mode 100644 drivers/net/davinci_emac.c
 create mode 100644 drivers/net/davinci_emac.h

diff --git a/arch/arm/mach-omap/include/mach/emac_defs.h b/arch/arm/mach-omap/include/mach/emac_defs.h
new file mode 100644
index 0000000..ef930fc
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/emac_defs.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ *
+ */
+
+#ifndef _AM3517_EMAC_H_
+#define _AM3517_EMAC_H_
+
+#define EMAC_BASE_ADDR                 0x5C010000
+#define EMAC_WRAPPER_BASE_ADDR         0x5C000000
+#define EMAC_WRAPPER_RAM_ADDR          0x5C020000
+#define EMAC_MDIO_BASE_ADDR            0x5C030000
+#define EMAC_HW_RAM_ADDR               0x01E20000
+
+#define EMAC_MDIO_BUS_FREQ             166000000       /* 166 MHZ check */
+#define EMAC_MDIO_CLOCK_FREQ           1000000         /* 2.0 MHz */
+
+/* SOFTRESET macro definition interferes with emac_regs structure definition */
+#undef SOFTRESET
+
+#define DAVINCI_EMAC_VERSION2
+
+#endif  /* _AM3517_EMAC_H_ */
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dac1eb9..bfde54b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -43,6 +43,11 @@ config DRIVER_NET_SMC91111
 	  This option enables support for the SMSC LAN91C111
 	  ethernet chip.
 
+config DRIVER_NET_DAVINCI_EMAC
+	bool "TI Davinci/OMAP EMAC ethernet driver"
+	depends on ARCH_DAVINCI || ARCH_OMAP3
+	select MIIDEV
+
 config DRIVER_NET_DM9K
 	bool "Davicom dm9k[E|A|B] ethernet driver"
 	depends on HAS_DM9000
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 951a220..52611f8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_DRIVER_NET_CS8900)		+= cs8900.o
 obj-$(CONFIG_DRIVER_NET_SMC911X)	+= smc911x.o
 obj-$(CONFIG_DRIVER_NET_SMC91111)	+= smc91111.o
+obj-$(CONFIG_DRIVER_NET_DAVINCI_EMAC)	+= davinci_emac.o
 obj-$(CONFIG_DRIVER_NET_DM9K)		+= dm9k.o
 obj-$(CONFIG_DRIVER_NET_NETX)		+= netx_eth.o
 obj-$(CONFIG_DRIVER_NET_AT91_ETHER)	+= at91_ether.o
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
new file mode 100644
index 0000000..3615f96
--- /dev/null
+++ b/drivers/net/davinci_emac.c
@@ -0,0 +1,615 @@
+/*
+ * Copyright (C) 2012 Jan Luebbe <j.luebbe@pengutronix.de>
+ *
+ * Ethernet driver for TI TMS320DM644x (DaVinci) chips.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright
+ * follows:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.c
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot.
+ * ver  1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors
+ *
+ */
+
+#include <common.h>
+#include <io.h>
+#include <clock.h>
+#include <net.h>
+#include <miidev.h>
+#include <malloc.h>
+#include <init.h>
+#include <asm/mmu.h>
+#include <asm/system.h>
+#include <mach/emac_defs.h>
+#include "davinci_emac.h"
+
+struct davinci_emac_priv {
+	struct device_d *dev;
+	struct eth_device edev;
+	struct mii_device miidev;
+
+	/* EMAC Addresses */
+	struct emac_regs *adap_emac; /* = EMAC_BASE_ADDR */
+	struct ewrap_regs *adap_ewrap; /* = EMAC_WRAPPER_BASE_ADDR */
+	struct mdio_regs *adap_mdio; /* = EMAC_MDIO_BASE_ADDR */
+
+	/* EMAC descriptors */
+	struct emac_desc *emac_rx_desc; /* = EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE */
+	struct emac_desc *emac_tx_desc; /* = EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE */
+	struct emac_desc *emac_rx_active_head; /* = 0 */
+	struct emac_desc *emac_rx_active_tail; /* = 0 */
+	int emac_rx_queue_active; /* = 0 */
+
+	/* Receive packet buffers */
+	unsigned char *emac_rx_buffers; /* [EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)] */
+
+	/* PHY address for a discovered PHY (0xff - not found) */
+	uint8_t active_phy_addr; /* = 0xff */
+
+	/* mac_addr[0] goes out on the wire first */
+	uint8_t mac_addr[6];
+};
+
+#ifdef EMAC_HW_RAM_ADDR
+static inline uint32_t BD_TO_HW(struct emac_desc *x)
+{
+	if (x == 0)
+		return 0;
+
+	return (uint32_t)(x) - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR;
+}
+
+static inline struct emac_desc* HW_TO_BD(uint32_t x)
+{
+	if (x == 0)
+		return 0;
+
+	return (struct emac_desc*)(x - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR);
+}
+#else
+#define BD_TO_HW(x)     (x)
+#define HW_TO_BD(x)     (x)
+#endif
+
+static void davinci_eth_mdio_enable(struct davinci_emac_priv *priv)
+{
+	uint32_t	clkdiv;
+
+	clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+
+	dev_dbg(priv->dev, "mdio_enable + 0x%08x\n", priv->adap_mdio->CONTROL);
+	writel((clkdiv & 0xff) |
+		MDIO_CONTROL_ENABLE |
+		MDIO_CONTROL_FAULT |
+		MDIO_CONTROL_FAULT_ENABLE,
+		&priv->adap_mdio->CONTROL);
+	dev_dbg(priv->dev, "mdio_enable - 0x%08x\n", priv->adap_mdio->CONTROL);
+
+	while (readl(&priv->adap_mdio->CONTROL) & MDIO_CONTROL_IDLE);
+}
+
+/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
+static int davinci_eth_phy_read(struct davinci_emac_priv *priv, uint8_t phy_addr, uint8_t reg_num, uint16_t *data)
+{
+	int	tmp;
+
+	while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO);
+
+	writel(MDIO_USERACCESS0_GO |
+		MDIO_USERACCESS0_WRITE_READ |
+		((reg_num & 0x1f) << 21) |
+		((phy_addr & 0x1f) << 16),
+		&priv->adap_mdio->USERACCESS0);
+
+	/* Wait for command to complete */
+	while ((tmp = readl(&priv->adap_mdio->USERACCESS0)) & MDIO_USERACCESS0_GO);
+
+	if (tmp & MDIO_USERACCESS0_ACK) {
+		*data = tmp & 0xffff;
+		dev_dbg(priv->dev, "emac_phy_read: addr=0x%02x reg=0x%02x data=0x%04x\n",
+			   phy_addr, reg_num, *data);
+		return 1;
+	}
+
+	*data = -1;
+	return 0;
+}
+
+/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
+static int davinci_eth_phy_write(struct davinci_emac_priv *priv, uint8_t phy_addr, uint8_t reg_num, uint16_t data)
+{
+
+	while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO);
+
+	dev_dbg(priv->dev, "emac_phy_write: addr=0x%02x reg=0x%02x data=0x%04x\n",
+		   phy_addr, reg_num, data);
+	writel(MDIO_USERACCESS0_GO |
+				MDIO_USERACCESS0_WRITE_WRITE |
+				((reg_num & 0x1f) << 21) |
+				((phy_addr & 0x1f) << 16) |
+				(data & 0xffff),
+		&priv->adap_mdio->USERACCESS0);
+
+	/* Wait for command to complete */
+	while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO);
+
+	return 1;
+}
+
+static int davinci_miidev_read(struct mii_device *dev, int addr, int reg)
+{
+	struct davinci_emac_priv *priv = (struct davinci_emac_priv *)dev->edev->priv;
+	uint16_t value = 0;
+	return davinci_eth_phy_read(priv, addr, reg, &value) ? value : -1;
+}
+
+static int davinci_miidev_write(struct mii_device *dev, int addr, int reg, int value)
+{
+	struct davinci_emac_priv *priv = (struct davinci_emac_priv *)dev->edev->priv;
+	return davinci_eth_phy_write(priv, addr, reg, value) ? 0 : -1;
+}
+
+static int davinci_emac_get_ethaddr(struct eth_device *edev, unsigned char *adr)
+{
+	return -1;
+}
+
+/*
+ * This function must be called before emac_open() if you want to override
+ * the default mac address.
+ */
+static int davinci_emac_set_ethaddr(struct eth_device *edev, unsigned char *addr)
+{
+	struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+	int i;
+
+	for (i = 0; i < sizeof(priv->mac_addr); i++)
+		priv->mac_addr[i] = addr[i];
+	return 0;
+}
+
+static int davinci_emac_init(struct eth_device *edev)
+{
+	dev_dbg(&edev->dev, "* emac_init\n");
+	return 0;
+}
+
+static int davinci_emac_open(struct eth_device *edev)
+{
+	struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+
+	uint32_t	clkdiv, cnt;
+	struct emac_desc	*rx_desc;
+	unsigned long mac_hi, mac_lo;
+	int ret;
+
+	dev_dbg(priv->dev, "+ emac_open\n");
+
+	dev_dbg(priv->dev, "emac->TXIDVER: 0x%08x\n", priv->adap_emac->TXIDVER);
+	dev_dbg(priv->dev, "emac->RXIDVER: 0x%08x\n", priv->adap_emac->RXIDVER);
+
+	/* Reset EMAC module and disable interrupts in wrapper */
+	writel(1, &priv->adap_emac->SOFTRESET);
+	while (readl(&priv->adap_emac->SOFTRESET) != 0);
+	writel(1, &priv->adap_ewrap->softrst);
+	while (readl(&priv->adap_ewrap->softrst) != 0);
+
+	writel(0, &priv->adap_ewrap->c0rxen);
+	writel(0, &priv->adap_ewrap->c1rxen);
+	writel(0, &priv->adap_ewrap->c2rxen);
+	writel(0, &priv->adap_ewrap->c0txen);
+	writel(0, &priv->adap_ewrap->c1txen);
+	writel(0, &priv->adap_ewrap->c2txen);
+	writel(0, &priv->adap_ewrap->c0miscen);
+	writel(0, &priv->adap_ewrap->c1miscen);
+	writel(0, &priv->adap_ewrap->c2miscen);
+
+	rx_desc = priv->emac_rx_desc;
+
+	/*
+	 * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
+	 * receive)
+	 * Use channel 0 only - other channels are disabled
+	 */
+	writel(0, &priv->adap_emac->MACINDEX);
+	mac_hi = (priv->mac_addr[3] << 24) |
+		 (priv->mac_addr[2] << 16) |
+		 (priv->mac_addr[1] << 8)  |
+		 (priv->mac_addr[0]);
+	mac_lo = (priv->mac_addr[5] << 8) |
+		 (priv->mac_addr[4]);
+
+	writel(mac_hi, &priv->adap_emac->MACADDRHI);
+	writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
+	       &priv->adap_emac->MACADDRLO);
+
+	/* Set source MAC address - REQUIRED */
+	writel(mac_hi, &priv->adap_emac->MACSRCADDRHI);
+	writel(mac_lo, &priv->adap_emac->MACSRCADDRLO);
+
+	/* Set DMA head and completion pointers to 0 */
+	for(cnt = 0; cnt < 8; cnt++) {
+		writel(0, (void *)&priv->adap_emac->TX0HDP + 4 * cnt);
+		writel(0, (void *)&priv->adap_emac->RX0HDP + 4 * cnt);
+		writel(0, (void *)&priv->adap_emac->TX0CP + 4 * cnt);
+		writel(0, (void *)&priv->adap_emac->RX0CP + 4 * cnt);
+	}
+
+	/* Clear Statistics (do this before setting MacControl register) */
+	for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++)
+		writel(0, (void *)&priv->adap_emac->RXGOODFRAMES + 4 * cnt);
+
+	/* No multicast addressing */
+	writel(0, &priv->adap_emac->MACHASH1);
+	writel(0, &priv->adap_emac->MACHASH2);
+
+	writel(0x01, &priv->adap_emac->TXCONTROL);
+	writel(0x01, &priv->adap_emac->RXCONTROL);
+
+	/* Create RX queue and set receive process in place */
+	priv->emac_rx_active_head = priv->emac_rx_desc;
+	for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
+		rx_desc->next = BD_TO_HW(rx_desc + 1);
+		rx_desc->buffer = &priv->emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
+		rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
+		rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
+		rx_desc++;
+	}
+
+	/* Set the last descriptor's "next" parameter to 0 to end the RX desc list */
+	rx_desc--;
+	rx_desc->next = 0;
+	priv->emac_rx_active_tail = rx_desc;
+	priv->emac_rx_queue_active = 1;
+
+	/* Enable TX/RX */
+	writel(EMAC_MAX_ETHERNET_PKT_SIZE, &priv->adap_emac->RXMAXLEN);
+	writel(0, &priv->adap_emac->RXBUFFEROFFSET);
+
+	/* No fancy configs - Use this for promiscous for debug - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */
+	writel(EMAC_RXMBPENABLE_RXBROADEN, &priv->adap_emac->RXMBPENABLE);
+
+	/* Enable ch 0 only */
+	writel(0x01, &priv->adap_emac->RXUNICASTSET);
+
+	/* Enable MII interface and full duplex mode (using RMMI) */
+	writel((EMAC_MACCONTROL_MIIEN_ENABLE |
+		EMAC_MACCONTROL_FULLDUPLEX_ENABLE |
+		EMAC_MACCONTROL_RMIISPEED_100),
+	       &priv->adap_emac->MACCONTROL);
+
+	/* Init MDIO & get link state */
+	clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+	writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT,
+		&priv->adap_mdio->CONTROL);
+
+	/* Start receive process */
+	writel(BD_TO_HW(priv->emac_rx_desc), &priv->adap_emac->RX0HDP);
+
+	ret = miidev_wait_aneg(&priv->miidev);
+	if (ret)
+		return ret;
+
+	ret = miidev_get_status(&priv->miidev);
+	if (ret < 0)
+		return ret;
+
+	miidev_print_status(&priv->miidev);
+
+	dev_dbg(priv->dev, "- emac_open\n");
+
+	return 0;
+}
+
+/* EMAC Channel Teardown */
+static void davinci_eth_ch_teardown(struct davinci_emac_priv *priv, int ch)
+{
+	uint32_t dly = 0xff;
+	uint32_t cnt;
+
+	dev_dbg(priv->dev, "+ emac_ch_teardown\n");
+
+	if (ch == EMAC_CH_TX) {
+		/* Init TX channel teardown */
+		writel(0, &priv->adap_emac->TXTEARDOWN);
+		for(cnt = 0; cnt != 0xfffffffc; cnt = readl(&priv->adap_emac->TX0CP)) {
+			/* Wait here for Tx teardown completion interrupt to occur
+			 * Note: A task delay can be called here to pend rather than
+			 * occupying CPU cycles - anyway it has been found that teardown
+			 * takes very few cpu cycles and does not affect functionality */
+			 dly--;
+			 udelay(1);
+			 if (dly == 0)
+				break;
+		}
+		writel(cnt, &priv->adap_emac->TX0CP);
+		writel(0, &priv->adap_emac->TX0HDP);
+	} else {
+		/* Init RX channel teardown */
+		writel(0, &priv->adap_emac->RXTEARDOWN);
+		for(cnt = 0; cnt != 0xfffffffc; cnt = readl(&priv->adap_emac->RX0CP)) {
+			/* Wait here for Rx teardown completion interrupt to occur
+			 * Note: A task delay can be called here to pend rather than
+			 * occupying CPU cycles - anyway it has been found that teardown
+			 * takes very few cpu cycles and does not affect functionality */
+			 dly--;
+			 udelay(1);
+			 if (dly == 0)
+				break;
+		}
+		writel(cnt, &priv->adap_emac->RX0CP);
+		writel(0, &priv->adap_emac->RX0HDP);
+	}
+
+	dev_dbg(priv->dev, "- emac_ch_teardown\n");
+}
+
+static void davinci_emac_halt(struct eth_device *edev)
+{
+	struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+
+	dev_dbg(priv->dev, "+ emac_halt\n");
+
+	davinci_eth_ch_teardown(priv, EMAC_CH_TX);	/* TX Channel teardown */
+	davinci_eth_ch_teardown(priv, EMAC_CH_RX);	/* RX Channel teardown */
+
+	/* Reset EMAC module and disable interrupts in wrapper */
+	writel(1, &priv->adap_emac->SOFTRESET);
+	writel(1, &priv->adap_ewrap->softrst);
+
+	writel(0, &priv->adap_ewrap->c0rxen);
+	writel(0, &priv->adap_ewrap->c1rxen);
+	writel(0, &priv->adap_ewrap->c2rxen);
+	writel(0, &priv->adap_ewrap->c0txen);
+	writel(0, &priv->adap_ewrap->c1txen);
+	writel(0, &priv->adap_ewrap->c2txen);
+	writel(0, &priv->adap_ewrap->c0miscen);
+	writel(0, &priv->adap_ewrap->c1miscen);
+	writel(0, &priv->adap_ewrap->c2miscen);
+
+	dev_dbg(priv->dev, "- emac_halt\n");
+}
+
+/*
+ * This function sends a single packet on the network and returns
+ * positive number (number of bytes transmitted) or negative for error
+ */
+static int davinci_emac_send(struct eth_device *edev, void *packet, int length)
+{
+	struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+	uint64_t start;
+	int ret_status = -1;
+
+	dev_dbg(priv->dev, "+ emac_send (length %d)\n", length);
+
+	/* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */
+	if (length < EMAC_MIN_ETHERNET_PKT_SIZE) {
+		length = EMAC_MIN_ETHERNET_PKT_SIZE;
+	}
+
+	/* Populate the TX descriptor */
+	writel(0, &priv->emac_tx_desc->next);
+	writel((uint8_t *) packet, &priv->emac_tx_desc->buffer);
+	writel((length & 0xffff), &priv->emac_tx_desc->buff_off_len);
+	writel(((length & 0xffff) | EMAC_CPPI_SOP_BIT |
+				    EMAC_CPPI_OWNERSHIP_BIT |
+				    EMAC_CPPI_EOP_BIT),
+		&priv->emac_tx_desc->pkt_flag_len);
+	dma_flush_range((ulong) packet, (ulong)packet + length);
+	/* Send the packet */
+	writel(BD_TO_HW(priv->emac_tx_desc), &priv->adap_emac->TX0HDP);
+
+	/* Wait for packet to complete or link down */
+	start = get_time_ns();
+	while (1) {
+		if (readl(&priv->adap_emac->TXINTSTATRAW) & 0x01) {
+			/* Acknowledge the TX descriptor */
+			writel(BD_TO_HW(priv->emac_tx_desc), &priv->adap_emac->TX0CP);
+			ret_status = length;
+			break;
+		}
+		if (is_timeout(start, 100 * MSECOND)) {
+			ret_status = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	dev_dbg(priv->dev, "- emac_send (ret_status %i)\n", ret_status);
+	return ret_status;
+}
+
+/*
+ * This function handles receipt of a packet from the network
+ */
+static int davinci_emac_recv(struct eth_device *edev)
+{
+	struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv;
+	struct emac_desc *rx_curr_desc;
+	struct emac_desc *curr_desc;
+	struct emac_desc *tail_desc;
+	unsigned char *pkt;
+	int status, len, ret = -1;
+
+	dev_dbg(priv->dev, "+ emac_recv\n");
+
+	rx_curr_desc = priv->emac_rx_active_head;
+	status = readl(&rx_curr_desc->pkt_flag_len);
+	if (status & EMAC_CPPI_OWNERSHIP_BIT) {
+		ret = 0;
+		goto out;
+	}
+
+	if (status & EMAC_CPPI_RX_ERROR_FRAME) {
+		/* Error in packet - discard it and requeue desc */
+		dev_warn(priv->dev, "WARN: emac_rcv_pkt: Error in packet\n");
+	} else {
+		pkt = (unsigned char *)readl(&rx_curr_desc->buffer);
+		len = readl(&rx_curr_desc->buff_off_len) & 0xffff;
+		dev_dbg(priv->dev, "| emac_recv got packet (length %i)\n", len);
+		dma_inv_range((ulong)pkt,
+				(ulong)rx_curr_desc->buffer + len);
+		net_receive(pkt, len);
+		ret = len;
+	}
+
+	/* Ack received packet descriptor */
+	writel(BD_TO_HW(rx_curr_desc), &priv->adap_emac->RX0CP);
+	curr_desc = rx_curr_desc;
+	priv->emac_rx_active_head = HW_TO_BD(readl(&rx_curr_desc->next));
+
+	if (status & EMAC_CPPI_EOQ_BIT) {
+		if (priv->emac_rx_active_head) {
+			writel(BD_TO_HW(priv->emac_rx_active_head),
+				&priv->adap_emac->RX0HDP);
+		} else {
+			priv->emac_rx_queue_active = 0;
+			dev_info(priv->dev, "INFO:emac_rcv_packet: RX Queue not active\n");
+		}
+	}
+
+	/* Recycle RX descriptor */
+	writel(EMAC_MAX_ETHERNET_PKT_SIZE, &rx_curr_desc->buff_off_len);
+	writel(EMAC_CPPI_OWNERSHIP_BIT, &rx_curr_desc->pkt_flag_len);
+	writel(0, &rx_curr_desc->next);
+
+	if (priv->emac_rx_active_head == 0) {
+		dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue head = 0\n");
+		priv->emac_rx_active_head = curr_desc;
+		priv->emac_rx_active_tail = curr_desc;
+		if (priv->emac_rx_queue_active != 0) {
+			writel(BD_TO_HW(priv->emac_rx_active_head), &priv->adap_emac->RX0HDP);
+			dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
+			priv->emac_rx_queue_active = 1;
+		}
+	} else {
+		tail_desc = priv->emac_rx_active_tail;
+		priv->emac_rx_active_tail = curr_desc;
+		writel(BD_TO_HW(curr_desc), &tail_desc->next);
+		status = readl(&tail_desc->pkt_flag_len);
+		if (status & EMAC_CPPI_EOQ_BIT) {
+			writel(BD_TO_HW(curr_desc), &priv->adap_emac->RX0HDP);
+			status &= ~EMAC_CPPI_EOQ_BIT;
+			writel(status, &tail_desc->pkt_flag_len);
+		}
+	}
+
+out:
+	dev_dbg(priv->dev, "- emac_recv\n");
+
+	return ret;
+}
+
+static int davinci_emac_probe(struct device_d *dev)
+{
+	struct davinci_emac_priv *priv;
+	uint64_t start;
+
+	dev_dbg(dev, "+ emac_probe\n");
+
+	priv = xzalloc(sizeof(*priv));
+	dev->priv = priv;
+
+	priv->dev = dev;
+
+	priv->adap_emac = (struct emac_regs *)dev_request_mem_region(dev, 0);
+	priv->adap_ewrap = (struct ewrap_regs *)dev_request_mem_region(dev, 1);
+	priv->adap_mdio = (struct mdio_regs *)dev_request_mem_region(dev, 2);
+
+	/* EMAC descriptors */
+	priv->emac_rx_desc = (struct emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE);
+	priv->emac_tx_desc = (struct emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
+	priv->emac_rx_active_head = 0;
+	priv->emac_rx_active_tail = 0;
+	priv->emac_rx_queue_active = 0;
+
+	/* Receive packet buffers */
+	priv->emac_rx_buffers = xmemalign(4096, EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN));
+
+	/* PHY address for a discovered PHY (0xff - not found) */
+	priv->active_phy_addr = 0xff;
+
+	priv->edev.priv = priv;
+	priv->edev.init = davinci_emac_init;
+	priv->edev.open = davinci_emac_open;
+	priv->edev.halt = davinci_emac_halt;
+	priv->edev.send = davinci_emac_send;
+	priv->edev.recv = davinci_emac_recv;
+	priv->edev.get_ethaddr = davinci_emac_get_ethaddr;
+	priv->edev.set_ethaddr = davinci_emac_set_ethaddr;
+	priv->edev.parent = dev;
+
+	davinci_eth_mdio_enable(priv);
+
+	start = get_time_ns();
+	while (1) {
+		if (readl(&priv->adap_mdio->ALIVE))
+			break;
+		if (is_timeout(start, 256 * MSECOND)) {
+			dev_err(dev, "No ETH PHY detected!\n");
+			break;
+		}
+	}
+
+	priv->miidev.read = davinci_miidev_read;
+	priv->miidev.write = davinci_miidev_write;
+	priv->miidev.address = 0x01;
+	priv->miidev.flags = MIIDEV_FORCE_LINK;
+	priv->miidev.edev = &priv->edev;
+	priv->miidev.parent = dev;
+
+	mii_register(&priv->miidev);
+
+	eth_register(&priv->edev);
+
+	dev_dbg(dev, "- emac_probe\n");
+	return 0;
+}
+
+static void davinci_emac_remove(struct device_d *dev)
+{
+	struct davinci_emac_priv *priv = dev->priv;
+
+	davinci_emac_halt(&priv->edev);
+}
+
+static struct driver_d davinci_emac_driver = {
+	.name   = "davinci_emac",
+	.probe  = davinci_emac_probe,
+	.remove = davinci_emac_remove,
+};
+
+static int davinci_emac_register(void)
+{
+	register_driver(&davinci_emac_driver);
+	return 0;
+}
+
+device_initcall(davinci_emac_register);
diff --git a/drivers/net/davinci_emac.h b/drivers/net/davinci_emac.h
new file mode 100644
index 0000000..b5d1dfa
--- /dev/null
+++ b/drivers/net/davinci_emac.h
@@ -0,0 +1,318 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ *
+ */
+
+#ifndef _DAVINCI_EMAC_H_
+#define _DAVINCI_EMAC_H_
+
+/* PHY mask - set only those phy number bits where phy is/can be connected */
+#define EMAC_MDIO_PHY_NUM           1
+#define EMAC_MDIO_PHY_MASK          (1 << EMAC_MDIO_PHY_NUM)
+
+/* Ethernet Min/Max packet size */
+#define EMAC_MIN_ETHERNET_PKT_SIZE	60
+#define EMAC_MAX_ETHERNET_PKT_SIZE	1518
+#define EMAC_PKT_ALIGN			18	/* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */
+
+/* Number of RX packet buffers
+ * NOTE: Only 1 buffer supported as of now
+ */
+#define EMAC_MAX_RX_BUFFERS		10
+
+/***********************************************
+ ******** Internally used macros ***************
+ ***********************************************/
+
+#define EMAC_CH_TX			1
+#define EMAC_CH_RX			0
+
+/* Each descriptor occupies 4 words, lets start RX desc's at 0 and
+ * reserve space for 64 descriptors max
+ */
+#define EMAC_RX_DESC_BASE		0x0
+#define EMAC_TX_DESC_BASE		0x1000
+
+/* EMAC Teardown value */
+#define EMAC_TEARDOWN_VALUE		0xfffffffc
+
+/* MII Status Register */
+#define MII_STATUS_REG			1
+
+/* Number of statistics registers */
+#define EMAC_NUM_STATS			36
+
+
+/* EMAC Descriptor */
+struct emac_desc {
+	uint32_t	next;		/* Pointer to next descriptor in chain */
+	uint8_t		*buffer;	/* Pointer to data buffer */
+	uint32_t	buff_off_len;	/* Buffer Offset(MSW) and Length(LSW) */
+	uint32_t	pkt_flag_len;	/* Packet Flags(MSW) and Length(LSW) */
+};
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT		(0x80000000)
+#define EMAC_CPPI_EOP_BIT		(0x40000000)
+#define EMAC_CPPI_OWNERSHIP_BIT		(0x20000000)
+#define EMAC_CPPI_EOQ_BIT		(0x10000000)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT	(0x08000000)
+#define EMAC_CPPI_PASS_CRC_BIT		(0x04000000)
+
+#define EMAC_CPPI_RX_ERROR_FRAME	(0x03fc0000)
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE		(0x20)
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE	(0x1)
+#define EMAC_MACCONTROL_GIGABIT_ENABLE		(1 << 7)
+#define EMAC_MACCONTROL_GIGFORCE		(1 << 17)
+#define EMAC_MACCONTROL_RMIISPEED_100		(1 << 15)
+
+#define EMAC_MAC_ADDR_MATCH		(1 << 19)
+#define EMAC_MAC_ADDR_IS_VALID		(1 << 20)
+
+#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE	(0x200000)
+#define EMAC_RXMBPENABLE_RXBROADEN	(0x2000)
+
+
+#define MDIO_CONTROL_IDLE		(0x80000000)
+#define MDIO_CONTROL_ENABLE		(0x40000000)
+#define MDIO_CONTROL_FAULT_ENABLE	(0x40000)
+#define MDIO_CONTROL_FAULT		(0x80000)
+#define MDIO_USERACCESS0_GO		(0x80000000)
+#define MDIO_USERACCESS0_WRITE_READ	(0x0)
+#define MDIO_USERACCESS0_WRITE_WRITE	(0x40000000)
+#define MDIO_USERACCESS0_ACK		(0x20000000)
+
+/* Ethernet MAC Registers Structure */
+struct emac_regs {
+	uint32_t	TXIDVER;
+	uint32_t	TXCONTROL;
+	uint32_t	TXTEARDOWN;
+	uint8_t		RSVD0[4];
+	uint32_t	RXIDVER;
+	uint32_t	RXCONTROL;
+	uint32_t	RXTEARDOWN;
+	uint8_t		RSVD1[100];
+	uint32_t	TXINTSTATRAW;
+	uint32_t	TXINTSTATMASKED;
+	uint32_t	TXINTMASKSET;
+	uint32_t	TXINTMASKCLEAR;
+	uint32_t	MACINVECTOR;
+	uint8_t		RSVD2[12];
+	uint32_t	RXINTSTATRAW;
+	uint32_t	RXINTSTATMASKED;
+	uint32_t	RXINTMASKSET;
+	uint32_t	RXINTMASKCLEAR;
+	uint32_t	MACINTSTATRAW;
+	uint32_t	MACINTSTATMASKED;
+	uint32_t	MACINTMASKSET;
+	uint32_t	MACINTMASKCLEAR;
+	uint8_t		RSVD3[64];
+	uint32_t	RXMBPENABLE;
+	uint32_t	RXUNICASTSET;
+	uint32_t	RXUNICASTCLEAR;
+	uint32_t	RXMAXLEN;
+	uint32_t	RXBUFFEROFFSET;
+	uint32_t	RXFILTERLOWTHRESH;
+	uint8_t		RSVD4[8];
+	uint32_t	RX0FLOWTHRESH;
+	uint32_t	RX1FLOWTHRESH;
+	uint32_t	RX2FLOWTHRESH;
+	uint32_t	RX3FLOWTHRESH;
+	uint32_t	RX4FLOWTHRESH;
+	uint32_t	RX5FLOWTHRESH;
+	uint32_t	RX6FLOWTHRESH;
+	uint32_t	RX7FLOWTHRESH;
+	uint32_t	RX0FREEBUFFER;
+	uint32_t	RX1FREEBUFFER;
+	uint32_t	RX2FREEBUFFER;
+	uint32_t	RX3FREEBUFFER;
+	uint32_t	RX4FREEBUFFER;
+	uint32_t	RX5FREEBUFFER;
+	uint32_t	RX6FREEBUFFER;
+	uint32_t	RX7FREEBUFFER;
+	uint32_t	MACCONTROL;
+	uint32_t	MACSTATUS;
+	uint32_t	EMCONTROL;
+	uint32_t	FIFOCONTROL;
+	uint32_t	MACCONFIG;
+	uint32_t	SOFTRESET;
+	uint8_t		RSVD5[88];
+	uint32_t	MACSRCADDRLO;
+	uint32_t	MACSRCADDRHI;
+	uint32_t	MACHASH1;
+	uint32_t	MACHASH2;
+	uint32_t	BOFFTEST;
+	uint32_t	TPACETEST;
+	uint32_t	RXPAUSE;
+	uint32_t	TXPAUSE;
+	uint8_t		RSVD6[16];
+	uint32_t	RXGOODFRAMES;
+	uint32_t	RXBCASTFRAMES;
+	uint32_t	RXMCASTFRAMES;
+	uint32_t	RXPAUSEFRAMES;
+	uint32_t	RXCRCERRORS;
+	uint32_t	RXALIGNCODEERRORS;
+	uint32_t	RXOVERSIZED;
+	uint32_t	RXJABBER;
+	uint32_t	RXUNDERSIZED;
+	uint32_t	RXFRAGMENTS;
+	uint32_t	RXFILTERED;
+	uint32_t	RXQOSFILTERED;
+	uint32_t	RXOCTETS;
+	uint32_t	TXGOODFRAMES;
+	uint32_t	TXBCASTFRAMES;
+	uint32_t	TXMCASTFRAMES;
+	uint32_t	TXPAUSEFRAMES;
+	uint32_t	TXDEFERRED;
+	uint32_t	TXCOLLISION;
+	uint32_t	TXSINGLECOLL;
+	uint32_t	TXMULTICOLL;
+	uint32_t	TXEXCESSIVECOLL;
+	uint32_t	TXLATECOLL;
+	uint32_t	TXUNDERRUN;
+	uint32_t	TXCARRIERSENSE;
+	uint32_t	TXOCTETS;
+	uint32_t	FRAME64;
+	uint32_t	FRAME65T127;
+	uint32_t	FRAME128T255;
+	uint32_t	FRAME256T511;
+	uint32_t	FRAME512T1023;
+	uint32_t	FRAME1024TUP;
+	uint32_t	NETOCTETS;
+	uint32_t	RXSOFOVERRUNS;
+	uint32_t	RXMOFOVERRUNS;
+	uint32_t	RXDMAOVERRUNS;
+	uint8_t		RSVD7[624];
+	uint32_t	MACADDRLO;
+	uint32_t	MACADDRHI;
+	uint32_t	MACINDEX;
+	uint8_t		RSVD8[244];
+	uint32_t	TX0HDP;
+	uint32_t	TX1HDP;
+	uint32_t	TX2HDP;
+	uint32_t	TX3HDP;
+	uint32_t	TX4HDP;
+	uint32_t	TX5HDP;
+	uint32_t	TX6HDP;
+	uint32_t	TX7HDP;
+	uint32_t	RX0HDP;
+	uint32_t	RX1HDP;
+	uint32_t	RX2HDP;
+	uint32_t	RX3HDP;
+	uint32_t	RX4HDP;
+	uint32_t	RX5HDP;
+	uint32_t	RX6HDP;
+	uint32_t	RX7HDP;
+	uint32_t	TX0CP;
+	uint32_t	TX1CP;
+	uint32_t	TX2CP;
+	uint32_t	TX3CP;
+	uint32_t	TX4CP;
+	uint32_t	TX5CP;
+	uint32_t	TX6CP;
+	uint32_t	TX7CP;
+	uint32_t	RX0CP;
+	uint32_t	RX1CP;
+	uint32_t	RX2CP;
+	uint32_t	RX3CP;
+	uint32_t	RX4CP;
+	uint32_t	RX5CP;
+	uint32_t	RX6CP;
+	uint32_t	RX7CP;
+};
+
+/* EMAC Wrapper Registers Structure */
+struct ewrap_regs {
+#ifdef DAVINCI_EMAC_VERSION2
+	uint32_t	idver;
+	uint32_t	softrst;
+	uint32_t	emctrl;
+	uint32_t	c0rxthreshen;
+	uint32_t	c0rxen;
+	uint32_t	c0txen;
+	uint32_t	c0miscen;
+	uint32_t	c1rxthreshen;
+	uint32_t	c1rxen;
+	uint32_t	c1txen;
+	uint32_t	c1miscen;
+	uint32_t	c2rxthreshen;
+	uint32_t	c2rxen;
+	uint32_t	c2txen;
+	uint32_t	c2miscen;
+	uint32_t	c0rxthreshstat;
+	uint32_t	c0rxstat;
+	uint32_t	c0txstat;
+	uint32_t	c0miscstat;
+	uint32_t	c1rxthreshstat;
+	uint32_t	c1rxstat;
+	uint32_t	c1txstat;
+	uint32_t	c1miscstat;
+	uint32_t	c2rxthreshstat;
+	uint32_t	c2rxstat;
+	uint32_t	c2txstat;
+	uint32_t	c2miscstat;
+	uint32_t	c0rximax;
+	uint32_t	c0tximax;
+	uint32_t	c1rximax;
+	uint32_t	c1tximax;
+	uint32_t	c2rximax;
+	uint32_t	c2tximax;
+#else
+	uint8_t		RSVD0[4100];
+	uint32_t	EWCTL;
+	uint32_t	EWINTTCNT;
+#endif
+};
+
+/* EMAC MDIO Registers Structure */
+struct mdio_regs {
+	uint32_t	VERSION;
+	uint32_t	CONTROL;
+	uint32_t	ALIVE;
+	uint32_t	LINK;
+	uint32_t	LINKINTRAW;
+	uint32_t	LINKINTMASKED;
+	uint8_t	RSVD0[8];
+	uint32_t	USERINTRAW;
+	uint32_t	USERINTMASKED;
+	uint32_t	USERINTMASKSET;
+	uint32_t	USERINTMASKCLEAR;
+	uint8_t	RSVD1[80];
+	uint32_t	USERACCESS0;
+	uint32_t	USERPHYSEL0;
+	uint32_t	USERACCESS1;
+	uint32_t	USERPHYSEL1;
+};
+
+#endif  /* _DAVINCI_EMAC_H_ */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-09-05 15:52 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-05 15:52 Prepare support for TI AM35xx Jan Luebbe
2012-09-05 15:52 ` [PATCH 1/8] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-09-05 15:52 ` [PATCH 2/8] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-09-05 18:05   ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 19:10     ` Jan Luebbe
2012-09-05 20:19       ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 15:52 ` [PATCH 3/8] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-09-05 15:52 ` [PATCH 4/8] common: split out meminfo output and make it optional Jan Luebbe
2012-09-05 15:52 ` [PATCH 5/8] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-09-05 15:52 ` Jan Luebbe [this message]
2012-09-05 18:03   ` [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs Jean-Christophe PLAGNIOL-VILLARD
2012-09-06  7:20     ` Sascha Hauer
2012-09-06  8:58       ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 15:52 ` [PATCH 7/8] omap3: remove unused coded for clock configuration Jan Luebbe
2012-09-05 15:52 ` [PATCH 8/8] drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs Jan Luebbe
2012-09-05 18:04   ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346860337-777-7-git-send-email-jlu@pengutronix.de \
    --to=jlu@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox