From: Jan Luebbe <jlu@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 7/8] omap3: remove unused coded for clock configuration
Date: Wed, 5 Sep 2012 17:52:15 +0200 [thread overview]
Message-ID: <1346860337-777-8-git-send-email-jlu@pengutronix.de> (raw)
In-Reply-To: <1346860337-777-1-git-send-email-jlu@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
arch/arm/mach-omap/Kconfig | 17 -----------------
arch/arm/mach-omap/omap3_clock.c | 14 +-------------
2 files changed, 1 insertion(+), 30 deletions(-)
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index a781287..98750c4 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -52,20 +52,7 @@ config ARCH_OMAP4
endchoice
-### Generic Clock configurations to be enabled by Mach - invisible to enable.
-config OMAP_CLOCK_UART
- bool
-config OMAP_CLOCK_UART2
- bool
-config OMAP_CLOCK_UART3
- bool
-config OMAP_CLOCK_I2C
- bool
-
# Blind enable all possible clocks.. think twice before you do this.
-config OMAP_CLOCK_ALL
- bool
-
config OMAP_CLOCK_SOURCE_S32K
bool
@@ -117,14 +104,12 @@ choice
config MACH_OMAP343xSDP
bool "Texas Instrument's SDP343x"
- select OMAP_CLOCK_ALL
depends on ARCH_OMAP3
help
Say Y here if you are using SDP343x platform
config MACH_BEAGLE
bool "Texas Instrument's Beagle Board"
- select OMAP_CLOCK_ALL
select HAVE_NOSHELL
depends on ARCH_OMAP3
help
@@ -132,7 +117,6 @@ config MACH_BEAGLE
config MACH_OMAP3EVM
bool "Texas Instrument's OMAP3 EVM"
- select OMAP_CLOCK_ALL
select HAVE_NOSHELL
depends on ARCH_OMAP3
help
@@ -157,7 +141,6 @@ config MACH_PCM049
config MACH_PCAAL1
bool "Phytec phyCARD-A-L1"
- select OMAP_CLOCK_ALL
select HAVE_NOSHELL
depends on ARCH_OMAP3
help
diff --git a/arch/arm/mach-omap/omap3_clock.c b/arch/arm/mach-omap/omap3_clock.c
index 646235e..463633a 100644
--- a/arch/arm/mach-omap/omap3_clock.c
+++ b/arch/arm/mach-omap/omap3_clock.c
@@ -674,18 +674,6 @@ static void per_clocks_enable(void)
/* Enable the ICLK for 32K Sync Timer as its used in udelay */
sr32(CM_REG(ICLKEN_WKUP), 2, 1, 0x1);
-#ifdef CONFIG_OMAP_CLOCK_UART
- /* Enable UART1 clocks */
- sr32(CM_REG(FCLKEN1_CORE), 13, 1, 0x1);
- sr32(CM_REG(ICLKEN1_CORE), 13, 1, 0x1);
-#endif
-#ifdef CONFIG_OMAP_CLOCK_I2C
- /* Turn on all 3 I2C clocks */
- sr32(CM_REG(FCLKEN1_CORE), 15, 3, 0x7);
- sr32(CM_REG(ICLKEN1_CORE), 15, 3, 0x7); /* I2C1,2,3 = on */
-#endif
-
-#ifdef CONFIG_OMAP_CLOCK_ALL
#define FCK_IVA2_ON 0x00000001
#define FCK_CORE1_ON 0x03fffe29
#define ICK_CORE1_ON 0x3ffffffb
@@ -710,7 +698,7 @@ static void per_clocks_enable(void)
sr32(CM_REG(ICLKEN_CAM), 0, 32, ICK_CAM_ON);
sr32(CM_REG(FCLKEN_PER), 0, 32, FCK_PER_ON);
sr32(CM_REG(ICLKEN_PER), 0, 32, ICK_PER_ON);
-#endif
+
/* Settle down my friend */
sdelay(1000);
}
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-09-05 15:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-05 15:52 Prepare support for TI AM35xx Jan Luebbe
2012-09-05 15:52 ` [PATCH 1/8] drivers/nor/m25p80: add JEDEC ID for Micron/Numonyx SPI NOR flash Jan Luebbe
2012-09-05 15:52 ` [PATCH 2/8] Makefile: add target to produce a SPL compatible uimage Jan Luebbe
2012-09-05 18:05 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 19:10 ` Jan Luebbe
2012-09-05 20:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 15:52 ` [PATCH 3/8] scripts: add tool to create image for SPI boot on AM35xx Jan Luebbe
2012-09-05 15:52 ` [PATCH 4/8] common: split out meminfo output and make it optional Jan Luebbe
2012-09-05 15:52 ` [PATCH 5/8] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch Jan Luebbe
2012-09-05 15:52 ` [PATCH 6/8] drivers/net: add driver for the EMAC device found in some TI SoCs Jan Luebbe
2012-09-05 18:03 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-06 7:20 ` Sascha Hauer
2012-09-06 8:58 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-05 15:52 ` Jan Luebbe [this message]
2012-09-05 15:52 ` [PATCH 8/8] drivers/spi: add driver for the Multichannel SPI controller found in " Jan Luebbe
2012-09-05 18:04 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346860337-777-8-git-send-email-jlu@pengutronix.de \
--to=jlu@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox