* [PATCH 2/7] globalvar: add support to set a value to of all globalvars beginning with 'match'
2012-09-11 10:19 [PATCH 1/7] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-11 10:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globalvar Jean-Christophe PLAGNIOL-VILLARD
` (5 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-11 10:19 UTC (permalink / raw)
To: barebox
via c global_set_match and global -r
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
commands/global.c | 51 ++++++++++++++++++++++++++++++++++++++++-----------
common/globalvar.c | 10 ++++++++++
include/globalvar.h | 3 +++
3 files changed, 53 insertions(+), 11 deletions(-)
diff --git a/commands/global.c b/commands/global.c
index de6b13e..b7c3743 100644
--- a/commands/global.c
+++ b/commands/global.c
@@ -24,39 +24,68 @@
#include <command.h>
#include <globalvar.h>
#include <environment.h>
+#include <getopt.h>
-static int do_global(int argc, char *argv[])
+static int globalvar_set(char* name, char* value)
{
int ret;
+
+ ret = globalvar_add_simple(name);
+
+ if (value) {
+ char *tmp = asprintf("global.%s", name);
+ ret = setenv(tmp, value);
+ free(tmp);
+ }
+
+ return ret ? 1 : 0;
+}
+
+static int do_global(int argc, char *argv[])
+{
+ int opt;
+ int do_set_match = 0;
char *value;
- if (argc != 2)
+ while ((opt = getopt(argc, argv, "r")) > 0) {
+ switch (opt) {
+ case 'r':
+ do_set_match = 1;
+ break;
+ }
+ }
+
+ argc -= optind;
+ argv += optind;
+
+ if (argc != 1)
return COMMAND_ERROR_USAGE;
- value = strchr(argv[1], '=');
+ value = strchr(argv[0], '=');
if (value) {
*value = 0;
value++;
}
- ret = globalvar_add_simple(argv[1]);
+ if (do_set_match) {
+ if (!value)
+ value = "";
- if (value) {
- char *name = asprintf("global.%s", argv[1]);
- ret = setenv(name, value);
- free(name);
+ globalvar_set_match(argv[0], value);
+ return 0;
}
- return ret ? 1 : 0;
+ return globalvar_set(argv[0], value);
}
BAREBOX_CMD_HELP_START(global)
-BAREBOX_CMD_HELP_USAGE("global <var>[=<value]\n")
+BAREBOX_CMD_HELP_USAGE("global [-r] <var>[=<value]\n")
BAREBOX_CMD_HELP_SHORT("add a new global variable named <var>, optionally set to <value>\n")
+BAREBOX_CMD_HELP_SHORT("-r to set a value to of all globalvars beginning with 'match'")
BAREBOX_CMD_HELP_END
BAREBOX_CMD_START(global)
.cmd = do_global,
- .usage = "create global variables",
+ .usage = "create or set global variables",
BAREBOX_CMD_HELP(cmd_global_help)
BAREBOX_CMD_END
diff --git a/common/globalvar.c b/common/globalvar.c
index 71296ff..a8aaa72 100644
--- a/common/globalvar.c
+++ b/common/globalvar.c
@@ -46,6 +46,16 @@ char *globalvar_get_match(const char *match, const char *seperator)
return val;
}
+void globalvar_set_match(const char *match, const char *val)
+{
+ struct param_d *param;
+
+ list_for_each_entry(param, &global_device.parameters, list) {
+ if (!strncmp(match, param->name, strlen(match)))
+ dev_set_param(&global_device, param->name, val);
+ }
+}
+
/*
* globalvar_add_simple
*
diff --git a/include/globalvar.h b/include/globalvar.h
index a127a05..ddf885f 100644
--- a/include/globalvar.h
+++ b/include/globalvar.h
@@ -9,6 +9,7 @@ int globalvar_add(const char *name,
const char *(*get)(struct device_d *, struct param_d *p),
unsigned long flags);
char *globalvar_get_match(const char *match, const char *seperator);
+void globalvar_set_match(const char *match, const char *val);
#else
static inline int globalvar_add_simple(const char *name)
{
@@ -27,6 +28,8 @@ static inline char *globalvar_get_match(const char *match, const char *seperator
{
return NULL;
}
+
+static inline void globalvar_set_match(const char *match, const char *val) {}
#endif
#endif /* __GLOBALVAR_H */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globalvar
2012-09-11 10:19 [PATCH 1/7] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 2/7] globalvar: add support to set a value to of all globalvars beginning with 'match' Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-11 10:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 4/7] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globalvar Jean-Christophe PLAGNIOL-VILLARD
` (4 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-11 10:19 UTC (permalink / raw)
To: barebox
linux.bootargs.dyn.* will be cleared at the beginning of boot
This is need for boot sequence to do not have the previous boot param.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
defaultenv-2/base/bin/bootargs-ip | 4 ++--
defaultenv-2/base/bin/bootargs-ip-barebox | 2 +-
defaultenv-2/base/bin/bootargs-ip-dhcp | 2 +-
defaultenv-2/base/bin/bootargs-ip-none | 2 +-
defaultenv-2/base/bin/bootargs-root-disk | 2 +-
defaultenv-2/base/bin/bootargs-root-ext | 2 +-
defaultenv-2/base/bin/bootargs-root-initrd | 2 +-
defaultenv-2/base/bin/bootargs-root-jffs2 | 2 +-
defaultenv-2/base/bin/bootargs-root-nfs | 2 +-
defaultenv-2/base/bin/bootargs-root-ubi | 2 +-
defaultenv-2/base/bin/init | 5 +++--
defaultenv-2/base/boot/initrd | 2 +-
12 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/defaultenv-2/base/bin/bootargs-ip b/defaultenv-2/base/bin/bootargs-ip
index 15041c6..2d4486c 100644
--- a/defaultenv-2/base/bin/bootargs-ip
+++ b/defaultenv-2/base/bin/bootargs-ip
@@ -5,7 +5,7 @@
. /env/network/eth0
if [ $ip = dhcp ]; then
- global.linux.bootargs.ip="ip=dhcp"
+ global.linux.bootargs.dyn.ip="ip=dhcp"
else
- global.linux.bootargs.ip="ip=$ipaddr:$serverip:$gateway:$netmask::eth0:"
+ global.linux.bootargs.dyn.ip="ip=$ipaddr:$serverip:$gateway:$netmask::eth0:"
fi
diff --git a/defaultenv-2/base/bin/bootargs-ip-barebox b/defaultenv-2/base/bin/bootargs-ip-barebox
index 986c142..5a3b984 100644
--- a/defaultenv-2/base/bin/bootargs-ip-barebox
+++ b/defaultenv-2/base/bin/bootargs-ip-barebox
@@ -4,4 +4,4 @@
ifup eth0
-global.linux.bootargs.ip="ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask::eth0:"
+global.linux.bootargs.dyn.ip="ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask::eth0:"
diff --git a/defaultenv-2/base/bin/bootargs-ip-dhcp b/defaultenv-2/base/bin/bootargs-ip-dhcp
index c542b24..dec8ae4 100644
--- a/defaultenv-2/base/bin/bootargs-ip-dhcp
+++ b/defaultenv-2/base/bin/bootargs-ip-dhcp
@@ -2,4 +2,4 @@
# Do dhcp in Linux
-global.linux.bootargs.ip="ip=dhcp"
+global.linux.bootargs.dyn.ip="ip=dhcp"
diff --git a/defaultenv-2/base/bin/bootargs-ip-none b/defaultenv-2/base/bin/bootargs-ip-none
index c010154..88aaa21 100644
--- a/defaultenv-2/base/bin/bootargs-ip-none
+++ b/defaultenv-2/base/bin/bootargs-ip-none
@@ -2,4 +2,4 @@
# disable ip setup in Linux
-global.linux.bootargs.ip="ip=none"
+global.linux.bootargs.dyn.ip="ip=none"
diff --git a/defaultenv-2/base/bin/bootargs-root-disk b/defaultenv-2/base/bin/bootargs-root-disk
index df8750e..aa60cf3 100644
--- a/defaultenv-2/base/bin/bootargs-root-disk
+++ b/defaultenv-2/base/bin/bootargs-root-disk
@@ -23,4 +23,4 @@ if [ -z "${fstype}" ]; then
exit 1
fi
-global.linux.bootargs.root="root=/dev/$part rootfstype=$fstype rootwait"
+global.linux.bootargs.dyn.root="root=/dev/$part rootfstype=$fstype rootwait"
diff --git a/defaultenv-2/base/bin/bootargs-root-ext b/defaultenv-2/base/bin/bootargs-root-ext
index 45fcd5a..dbdddb9 100644
--- a/defaultenv-2/base/bin/bootargs-root-ext
+++ b/defaultenv-2/base/bin/bootargs-root-ext
@@ -9,4 +9,4 @@ while getopt "m:r:" opt; do
fi
done
-global.linux.bootargs.root="root=/dev/$part rootfstype=ext$type rootwait"
+global.linux.bootargs.dyn.root="root=/dev/$part rootfstype=ext$type rootwait"
diff --git a/defaultenv-2/base/bin/bootargs-root-initrd b/defaultenv-2/base/bin/bootargs-root-initrd
index 7072cea..cc711a1 100644
--- a/defaultenv-2/base/bin/bootargs-root-initrd
+++ b/defaultenv-2/base/bin/bootargs-root-initrd
@@ -13,4 +13,4 @@ while getopt "i:h" opt; do
fi
done
-global.linux.bootargs.root="root=/dev/ram0 rdinit=${rdinit}"
+global.linux.bootargs.dyn.root="root=/dev/ram0 rdinit=${rdinit}"
diff --git a/defaultenv-2/base/bin/bootargs-root-jffs2 b/defaultenv-2/base/bin/bootargs-root-jffs2
index 74d59af..a8eb5e7 100644
--- a/defaultenv-2/base/bin/bootargs-root-jffs2
+++ b/defaultenv-2/base/bin/bootargs-root-jffs2
@@ -18,4 +18,4 @@ if [ -z "$mtd" ]; then
exit 1
fi
-global.linux.bootargs.root="root=$mtd rootfstype=jffs2"
+global.linux.bootargs.dyn.root="root=$mtd rootfstype=jffs2"
diff --git a/defaultenv-2/base/bin/bootargs-root-nfs b/defaultenv-2/base/bin/bootargs-root-nfs
index 27bb6c4..355f93d 100644
--- a/defaultenv-2/base/bin/bootargs-root-nfs
+++ b/defaultenv-2/base/bin/bootargs-root-nfs
@@ -17,4 +17,4 @@ if [ -n ${serverip} ]; then
nfsroot="$serverip:$nfsroot"
fi
-global.linux.bootargs.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
+global.linux.bootargs.dyn.root="root=/dev/nfs nfsroot=$nfsroot,v3,tcp"
diff --git a/defaultenv-2/base/bin/bootargs-root-ubi b/defaultenv-2/base/bin/bootargs-root-ubi
index fb7f328..4260336 100644
--- a/defaultenv-2/base/bin/bootargs-root-ubi
+++ b/defaultenv-2/base/bin/bootargs-root-ubi
@@ -21,4 +21,4 @@ if [ -z "$mtd" ]; then
exit 1
fi
-global.linux.bootargs.root="root=ubi0:$ubiroot ubi.mtd=$mtd rootfstype=ubifs"
+global.linux.bootargs.dyn.root="root=ubi0:$ubiroot ubi.mtd=$mtd rootfstype=ubifs"
diff --git a/defaultenv-2/base/bin/init b/defaultenv-2/base/bin/init
index 9d7eb2e..8e8871d 100644
--- a/defaultenv-2/base/bin/init
+++ b/defaultenv-2/base/bin/init
@@ -8,8 +8,9 @@ global autoboot_timeout=3
global boot.default=net
global allow_color=true
global linux.bootargs.base
-global linux.bootargs.ip
-global linux.bootargs.root
+#linux.bootargs.dyn.* will be clearer at the beginning of boot
+global linux.bootargs.dyn.ip
+global linux.bootargs.dyn.root
global editcmd=sedit
/env/init/general
diff --git a/defaultenv-2/base/boot/initrd b/defaultenv-2/base/boot/initrd
index 79a353a..7c44d07 100644
--- a/defaultenv-2/base/boot/initrd
+++ b/defaultenv-2/base/boot/initrd
@@ -11,7 +11,7 @@ global.bootm.initrd="${path}/initramfs"
bootargs-root-initrd
#global.bootm.oftree=<path to oftree>
-global.linux.bootargs.root="root=/dev/ram0"
+global.linux.bootargs.dyn.root="root=/dev/ram0"
#bootargs-root-nfs -n "<path on server>" -s <serverip>
#bootargs-root-ubi -r <volume> -m <mtdname>
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 4/7] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globalvar
2012-09-11 10:19 [PATCH 1/7] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 2/7] globalvar: add support to set a value to of all globalvars beginning with 'match' Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 3/7] defaultenv-2: boot use global.linux.bootargs.dyn for dynamic globalvar Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-11 10:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 5/7] echo: always allow to pass -e option Jean-Christophe PLAGNIOL-VILLARD
` (3 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-11 10:19 UTC (permalink / raw)
To: barebox
This is need for boot sequence to do not have the previous boot param.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
defaultenv-2/base/bin/boot | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
index 4ebda3f..103eb87 100644
--- a/defaultenv-2/base/bin/boot
+++ b/defaultenv-2/base/bin/boot
@@ -33,6 +33,10 @@ while getopt "vdhl" opt; do
fi
done
+# clear linux.bootargs.dyn.* and bootm.*
+global -r linux.bootargs.dyn.
+global -r bootm.
+
if [ $# = 0 ]; then
scr="$global.boot.default"
else
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 5/7] echo: always allow to pass -e option
2012-09-11 10:19 [PATCH 1/7] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
` (2 preceding siblings ...)
2012-09-11 10:19 ` [PATCH 4/7] defaultenv-2: boot reset linux.bootargs.dyn. and bootm. globalvar Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-11 10:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 6/7] defaultenv-2/ansi-colors: export color only if enable Jean-Christophe PLAGNIOL-VILLARD
` (2 subsequent siblings)
6 siblings, 0 replies; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-11 10:19 UTC (permalink / raw)
To: barebox
This will allow to do not taint if not enabled
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
commands/echo.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/commands/echo.c b/commands/echo.c
index a19d992..4a5c981 100644
--- a/commands/echo.c
+++ b/commands/echo.c
@@ -33,10 +33,9 @@ static int do_echo(int argc, char *argv[])
int fd = stdout, opt, newline = 1;
char *file = NULL;
int oflags = O_WRONLY | O_CREAT;
-#ifdef CONFIG_CMD_ECHO_E
char str[CONFIG_CBSIZE];
int process_escape = 0;
-#endif
+
/* We can't use getopt() here because we want to
* echo all things we don't understand.
*/
@@ -66,11 +65,9 @@ static int do_echo(int argc, char *argv[])
goto no_optarg_out;
optind++;
break;
-#ifdef CONFIG_CMD_ECHO_E
case 'e':
- process_escape = 1;
+ process_escape = IS_ENABLED(CONFIG_CMD_ECHO_E);
break;
-#endif
default:
goto exit_parse;
}
@@ -89,13 +86,12 @@ exit_parse:
for (i = optind; i < argc; i++) {
if (i > optind)
fputc(fd, ' ');
-#ifdef CONFIG_CMD_ECHO_E
if (process_escape) {
process_escape_sequence(argv[i], str, CONFIG_CBSIZE);
fputs(fd, str);
- } else
-#endif
+ } else {
fputs(fd, argv[i]);
+ }
}
if (newline)
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 6/7] defaultenv-2/ansi-colors: export color only if enable
2012-09-11 10:19 [PATCH 1/7] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
` (3 preceding siblings ...)
2012-09-11 10:19 ` [PATCH 5/7] echo: always allow to pass -e option Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-11 10:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 10:19 ` [PATCH 7/7] defaultenv-2: add boot sequence Jean-Christophe PLAGNIOL-VILLARD
2012-09-11 11:21 ` [PATCH 1/7] globalbar: add inline when not enabled Sascha Hauer
6 siblings, 0 replies; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-11 10:19 UTC (permalink / raw)
To: barebox
This will allow to do not check it everywhere
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
defaultenv-2/base/data/ansi-colors | 4 ++++
defaultenv-2/menu/menu/mainmenu | 4 +---
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/defaultenv-2/base/data/ansi-colors b/defaultenv-2/base/data/ansi-colors
index c71b6b7..6365329 100644
--- a/defaultenv-2/base/data/ansi-colors
+++ b/defaultenv-2/base/data/ansi-colors
@@ -1,5 +1,9 @@
#!/bin/sh
+if [ ${global.allow_color} != "true" ]; then
+ exit
+fi
+
# Colors
export RED='\e[1;31m'
export BLUE='\e[1;34m'
diff --git a/defaultenv-2/menu/menu/mainmenu b/defaultenv-2/menu/menu/mainmenu
index d7b0033..5bd7027 100644
--- a/defaultenv-2/menu/menu/mainmenu
+++ b/defaultenv-2/menu/menu/mainmenu
@@ -3,9 +3,7 @@
savepath=$PATH
export menupath=$PATH:/env/menu
-if [ ${global.allow_color} = "true" ]; then
- . /env/data/ansi-colors
-fi
+. /env/data/ansi-colors
while true; do
export PATH=${menupath}
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 7/7] defaultenv-2: add boot sequence
2012-09-11 10:19 [PATCH 1/7] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
` (4 preceding siblings ...)
2012-09-11 10:19 ` [PATCH 6/7] defaultenv-2/ansi-colors: export color only if enable Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-11 10:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-12 7:20 ` Sascha Hauer
2012-09-11 11:21 ` [PATCH 1/7] globalbar: add inline when not enabled Sascha Hauer
6 siblings, 1 reply; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-11 10:19 UTC (permalink / raw)
To: barebox
Boot will boot run sequentially the script in /env/boot.d
drop global.boot.default as we start the boot sequence by default
update the current board using the defaultenv-2 at the sametime
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
.../arm/boards/crystalfontz-cfa10036/env/boot.d/01 | 1 +
.../arm/boards/crystalfontz-cfa10036/env/boot.d/02 | 1 +
.../arm/boards/crystalfontz-cfa10036/env/boot.d/03 | 1 +
.../boards/crystalfontz-cfa10036/env/init/general | 3 --
.../boards/freescale-mx6-sabrelite/env/boot.d/01 | 1 +
.../boards/freescale-mx6-sabrelite/env/boot.d/02 | 1 +
arch/arm/boards/pcm038/env/boot.d/01 | 1 +
arch/arm/boards/pcm038/env/boot.d/02 | 1 +
arch/arm/boards/pcm038/env/boot.d/03 | 1 +
arch/arm/boards/tqma53/env/boot.d/01 | 1 +
arch/arm/boards/tqma53/env/boot.d/02 | 1 +
common/Kconfig | 2 +
defaultenv-2/base/bin/boot | 51 +++++++++++++++++---
defaultenv-2/base/init/general | 3 --
14 files changed, 57 insertions(+), 12 deletions(-)
create mode 120000 arch/arm/boards/crystalfontz-cfa10036/env/boot.d/01
create mode 120000 arch/arm/boards/crystalfontz-cfa10036/env/boot.d/02
create mode 120000 arch/arm/boards/crystalfontz-cfa10036/env/boot.d/03
create mode 120000 arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/01
create mode 120000 arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/02
create mode 120000 arch/arm/boards/pcm038/env/boot.d/01
create mode 120000 arch/arm/boards/pcm038/env/boot.d/02
create mode 120000 arch/arm/boards/pcm038/env/boot.d/03
create mode 120000 arch/arm/boards/tqma53/env/boot.d/01
create mode 120000 arch/arm/boards/tqma53/env/boot.d/02
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/01 b/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/01
new file mode 120000
index 0000000..1e6fecc
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/01
@@ -0,0 +1 @@
+../boot/mmc-ext3
\ No newline at end of file
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/02 b/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/02
new file mode 120000
index 0000000..70b8ea3
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/02
@@ -0,0 +1 @@
+../boot/net
\ No newline at end of file
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/03 b/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/03
new file mode 120000
index 0000000..b41f2fd
--- /dev/null
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/boot.d/03
@@ -0,0 +1 @@
+../boot/initrd
\ No newline at end of file
diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/init/general b/arch/arm/boards/crystalfontz-cfa10036/env/init/general
index 5cb3a75..125de5d 100644
--- a/arch/arm/boards/crystalfontz-cfa10036/env/init/general
+++ b/arch/arm/boards/crystalfontz-cfa10036/env/init/general
@@ -7,6 +7,3 @@ fi
# timeout in seconds before the default boot entry is started
global.autoboot_timeout=3
-
-# default boot entry (one of /env/boot/*)
-global.boot.default=mmc-ext3
diff --git a/arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/01 b/arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/01
new file mode 120000
index 0000000..70b8ea3
--- /dev/null
+++ b/arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/01
@@ -0,0 +1 @@
+../boot/net
\ No newline at end of file
diff --git a/arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/02 b/arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/02
new file mode 120000
index 0000000..b41f2fd
--- /dev/null
+++ b/arch/arm/boards/freescale-mx6-sabrelite/env/boot.d/02
@@ -0,0 +1 @@
+../boot/initrd
\ No newline at end of file
diff --git a/arch/arm/boards/pcm038/env/boot.d/01 b/arch/arm/boards/pcm038/env/boot.d/01
new file mode 120000
index 0000000..d1b275c
--- /dev/null
+++ b/arch/arm/boards/pcm038/env/boot.d/01
@@ -0,0 +1 @@
+../boot/nand-ubi
\ No newline at end of file
diff --git a/arch/arm/boards/pcm038/env/boot.d/02 b/arch/arm/boards/pcm038/env/boot.d/02
new file mode 120000
index 0000000..70b8ea3
--- /dev/null
+++ b/arch/arm/boards/pcm038/env/boot.d/02
@@ -0,0 +1 @@
+../boot/net
\ No newline at end of file
diff --git a/arch/arm/boards/pcm038/env/boot.d/03 b/arch/arm/boards/pcm038/env/boot.d/03
new file mode 120000
index 0000000..b41f2fd
--- /dev/null
+++ b/arch/arm/boards/pcm038/env/boot.d/03
@@ -0,0 +1 @@
+../boot/initrd
\ No newline at end of file
diff --git a/arch/arm/boards/tqma53/env/boot.d/01 b/arch/arm/boards/tqma53/env/boot.d/01
new file mode 120000
index 0000000..70b8ea3
--- /dev/null
+++ b/arch/arm/boards/tqma53/env/boot.d/01
@@ -0,0 +1 @@
+../boot/net
\ No newline at end of file
diff --git a/arch/arm/boards/tqma53/env/boot.d/02 b/arch/arm/boards/tqma53/env/boot.d/02
new file mode 120000
index 0000000..b41f2fd
--- /dev/null
+++ b/arch/arm/boards/tqma53/env/boot.d/02
@@ -0,0 +1 @@
+../boot/initrd
\ No newline at end of file
diff --git a/common/Kconfig b/common/Kconfig
index b97392c..f411719 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -563,6 +563,8 @@ config DEFAULT_ENVIRONMENT_GENERIC_NEW
select CMD_GLOBAL
select CMD_AUTOMOUNT
select CMD_BASENAME
+ select CMD_READLINK
+ select CMD_DIRNAME
select FLEXIBLE_BOOTARGS
prompt "Generic environment template"
diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
index 103eb87..68e9e89 100644
--- a/defaultenv-2/base/bin/boot
+++ b/defaultenv-2/base/bin/boot
@@ -2,6 +2,8 @@
verbose=
dryrun=
+# ensure sequence is init at something
+sequence=t
usage="
$0 [OPTIONS] [source]\n
@@ -10,11 +12,27 @@ $0 [OPTIONS] [source]\n
-l list boot sources\n
-h help"
+. /env/data/ansi-colors
+
for i in /env/boot/*; do
basename $i s
sources="$sources$s "
done
+if [ -d /env/boot.d ]; then
+ sources="$sources\n\nboot sequence:"
+ for i in /env/boot.d/*; do
+ readlink -f $i s
+ basename $s link
+ basename $i s
+ sources="$sources\n ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
+ done
+else
+ sequence=n
+ sources="$sources\n\nboot sequence:\nnone"
+ echo "${RED}WARNING: boot sequence: none${NC}"
+fi
+
while getopt "vdhl" opt; do
if [ ${opt} = v ]; then
if [ -n "$verbose" ]; then
@@ -23,7 +41,7 @@ while getopt "vdhl" opt; do
verbose="-v"
fi
elif [ ${opt} = d ]; then
- dryrun=1
+ dryrun="-d"
elif [ ${opt} = l ]; then
echo -e "boot sources:\n$sources"
exit 0
@@ -37,18 +55,39 @@ done
global -r linux.bootargs.dyn.
global -r bootm.
-if [ $# = 0 ]; then
- scr="$global.boot.default"
+if [ $# = 0 -a "x$sequence" = "xt" ]; then
+ sequence=y
else
scr="$1"
fi
+if [ "x$sequence" = "xy" ]; then
+ if [ ! -d /env/boot.d ]; then
+ echo -e "${GREEN}boot sequence ${RED}none${NC}"
+ exit 1
+ fi
+ echo -e "${GREEN}Start boot sequence${NC}"
+ for i in /env/boot.d/*; do
+ readlink -f $i s
+ basename $s link
+ basename $i s
+ msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
+ echo -e "${msg}"
+ boot $dryrun $s
+ echo -e "${msg} ${RED}failled${NC}"
+ ret=$?
+ done
+ echo -e "${GREEN}boot sequence ${RED}failled${NC}"
+ exit $ret
+fi
+
if [ -n "$scr" ]; then
- if [ ! -f /env/boot/$scr ]; then
- echo -e "/env/boot/$scr does not exist.Valid choices:\n$sources"
+ if [ ! -f /env/boot.d/$scr -a ! -f /env/boot/$scr ]; then
+ echo -e "/env/boot/$scr or /env/boot.d/$scr does not exist.Valid choices:\n$sources"
exit
fi
- /env/boot/$scr
+ [ -f /env/boot.d/$scr ] && /env/boot.d/$scr
+ [ -f /env/boot/$scr ] && /env/boot/$scr
fi
if [ -n "$dryrun" ]; then
diff --git a/defaultenv-2/base/init/general b/defaultenv-2/base/init/general
index 98a92d1..e7fffdd 100644
--- a/defaultenv-2/base/init/general
+++ b/defaultenv-2/base/init/general
@@ -10,6 +10,3 @@ global.user=sha
# timeout in seconds before the default boot entry is started
global.autoboot_timeout=3
-
-# default boot entry (one of /env/boot/*)
-global.boot.default=net
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH 7/7] defaultenv-2: add boot sequence
2012-09-11 10:19 ` [PATCH 7/7] defaultenv-2: add boot sequence Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-12 7:20 ` Sascha Hauer
2012-09-12 9:01 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 15+ messages in thread
From: Sascha Hauer @ 2012-09-12 7:20 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Tue, Sep 11, 2012 at 12:19:27PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Boot will boot run sequentially the script in /env/boot.d
>
> diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> index 103eb87..68e9e89 100644
> --- a/defaultenv-2/base/bin/boot
> +++ b/defaultenv-2/base/bin/boot
> @@ -2,6 +2,8 @@
>
> verbose=
> dryrun=
> +# ensure sequence is init at something
> +sequence=t
This looks unnecessary.
>
> usage="
> $0 [OPTIONS] [source]\n
> @@ -10,11 +12,27 @@ $0 [OPTIONS] [source]\n
> -l list boot sources\n
> -h help"
>
> +. /env/data/ansi-colors
> +
> for i in /env/boot/*; do
> basename $i s
> sources="$sources$s "
> done
>
> +if [ -d /env/boot.d ]; then
> + sources="$sources\n\nboot sequence:"
> + for i in /env/boot.d/*; do
> + readlink -f $i s
> + basename $s link
> + basename $i s
> + sources="$sources\n ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> + done
> +else
> + sequence=n
> + sources="$sources\n\nboot sequence:\nnone"
> + echo "${RED}WARNING: boot sequence: none${NC}"
> +fi
> +
> while getopt "vdhl" opt; do
> if [ ${opt} = v ]; then
> if [ -n "$verbose" ]; then
> @@ -23,7 +41,7 @@ while getopt "vdhl" opt; do
> verbose="-v"
> fi
> elif [ ${opt} = d ]; then
> - dryrun=1
> + dryrun="-d"
> elif [ ${opt} = l ]; then
> echo -e "boot sources:\n$sources"
> exit 0
> @@ -37,18 +55,39 @@ done
> global -r linux.bootargs.dyn.
> global -r bootm.
>
> -if [ $# = 0 ]; then
> - scr="$global.boot.default"
> +if [ $# = 0 -a "x$sequence" = "xt" ]; then
> + sequence=y
> else
> scr="$1"
> fi
You could merge the 'if [ -d /env/boot.d ]' above with this if/else. The
result would be easier to read IMO.
Also you don't seem to catch the case when no /env/boot.d/* exist and
nothing is given on the command line.
>
> +if [ "x$sequence" = "xy" ]; then
This x quirk is not necessary anymore. Do if [ "$sequence" = y ]
instead.
> + if [ ! -d /env/boot.d ]; then
> + echo -e "${GREEN}boot sequence ${RED}none${NC}"
> + exit 1
> + fi
> + echo -e "${GREEN}Start boot sequence${NC}"
> + for i in /env/boot.d/*; do
> + readlink -f $i s
> + basename $s link
> + basename $i s
> + msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> + echo -e "${msg}"
> + boot $dryrun $s
> + echo -e "${msg} ${RED}failled${NC}"
> + ret=$?
> + done
> + echo -e "${GREEN}boot sequence ${RED}failled${NC}"
s/failled/failed/
> + exit $ret
> +fi
> +
> if [ -n "$scr" ]; then
> - if [ ! -f /env/boot/$scr ]; then
> - echo -e "/env/boot/$scr does not exist.Valid choices:\n$sources"
> + if [ ! -f /env/boot.d/$scr -a ! -f /env/boot/$scr ]; then
> + echo -e "/env/boot/$scr or /env/boot.d/$scr does not exist.Valid choices:\n$sources"
You could add the missing whitespace between 'exist' and 'valid'
> exit
> fi
> - /env/boot/$scr
> + [ -f /env/boot.d/$scr ] && /env/boot.d/$scr
> + [ -f /env/boot/$scr ] && /env/boot/$scr
> fi
>
> if [ -n "$dryrun" ]; then
> diff --git a/defaultenv-2/base/init/general b/defaultenv-2/base/init/general
> index 98a92d1..e7fffdd 100644
> --- a/defaultenv-2/base/init/general
> +++ b/defaultenv-2/base/init/general
> @@ -10,6 +10,3 @@ global.user=sha
>
> # timeout in seconds before the default boot entry is started
> global.autoboot_timeout=3
> -
> -# default boot entry (one of /env/boot/*)
> -global.boot.default=net
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH 7/7] defaultenv-2: add boot sequence
2012-09-12 7:20 ` Sascha Hauer
@ 2012-09-12 9:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-12 9:44 ` Sascha Hauer
0 siblings, 1 reply; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-12 9:01 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 09:20 Wed 12 Sep , Sascha Hauer wrote:
> On Tue, Sep 11, 2012 at 12:19:27PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Boot will boot run sequentially the script in /env/boot.d
> >
> > diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> > index 103eb87..68e9e89 100644
> > --- a/defaultenv-2/base/bin/boot
> > +++ b/defaultenv-2/base/bin/boot
> > @@ -2,6 +2,8 @@
> >
> > verbose=
> > dryrun=
> > +# ensure sequence is init at something
> > +sequence=t
>
> This looks unnecessary.
I beleive it too but
no as you run boot again the sequence keep the previous set I set it after
trial
>
> >
> > usage="
> > $0 [OPTIONS] [source]\n
> > @@ -10,11 +12,27 @@ $0 [OPTIONS] [source]\n
> > -l list boot sources\n
> > -h help"
> >
> > +. /env/data/ansi-colors
> > +
> > for i in /env/boot/*; do
> > basename $i s
> > sources="$sources$s "
> > done
> >
> > +if [ -d /env/boot.d ]; then
> > + sources="$sources\n\nboot sequence:"
> > + for i in /env/boot.d/*; do
> > + readlink -f $i s
> > + basename $s link
> > + basename $i s
> > + sources="$sources\n ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> > + done
> > +else
> > + sequence=n
> > + sources="$sources\n\nboot sequence:\nnone"
> > + echo "${RED}WARNING: boot sequence: none${NC}"
> > +fi
> > +
> > while getopt "vdhl" opt; do
> > if [ ${opt} = v ]; then
> > if [ -n "$verbose" ]; then
> > @@ -23,7 +41,7 @@ while getopt "vdhl" opt; do
> > verbose="-v"
> > fi
> > elif [ ${opt} = d ]; then
> > - dryrun=1
> > + dryrun="-d"
> > elif [ ${opt} = l ]; then
> > echo -e "boot sources:\n$sources"
> > exit 0
> > @@ -37,18 +55,39 @@ done
> > global -r linux.bootargs.dyn.
> > global -r bootm.
> >
> > -if [ $# = 0 ]; then
> > - scr="$global.boot.default"
> > +if [ $# = 0 -a "x$sequence" = "xt" ]; then
> > + sequence=y
> > else
> > scr="$1"
> > fi
>
> You could merge the 'if [ -d /env/boot.d ]' above with this if/else. The
> result would be easier to read IMO.
> Also you don't seem to catch the case when no /env/boot.d/* exist and
> nothing is given on the command line.
the idea it to check bot /env/boot.d and /env/boot as you may want to boot
something no in the boot sequence but for test as example
>
> >
> > +if [ "x$sequence" = "xy" ]; then
>
> This x quirk is not necessary anymore. Do if [ "$sequence" = y ]
> instead.
>
> > + if [ ! -d /env/boot.d ]; then
> > + echo -e "${GREEN}boot sequence ${RED}none${NC}"
> > + exit 1
> > + fi
> > + echo -e "${GREEN}Start boot sequence${NC}"
> > + for i in /env/boot.d/*; do
> > + readlink -f $i s
> > + basename $s link
> > + basename $i s
> > + msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> > + echo -e "${msg}"
> > + boot $dryrun $s
> > + echo -e "${msg} ${RED}failled${NC}"
> > + ret=$?
> > + done
> > + echo -e "${GREEN}boot sequence ${RED}failled${NC}"
>
> s/failled/failed/
>
> > + exit $ret
> > +fi
> > +
> > if [ -n "$scr" ]; then
> > - if [ ! -f /env/boot/$scr ]; then
> > - echo -e "/env/boot/$scr does not exist.Valid choices:\n$sources"
> > + if [ ! -f /env/boot.d/$scr -a ! -f /env/boot/$scr ]; then
> > + echo -e "/env/boot/$scr or /env/boot.d/$scr does not exist.Valid choices:\n$sources"
>
> You could add the missing whitespace between 'exist' and 'valid'
>
> > exit
> > fi
> > - /env/boot/$scr
> > + [ -f /env/boot.d/$scr ] && /env/boot.d/$scr
> > + [ -f /env/boot/$scr ] && /env/boot/$scr
> > fi
> >
> > if [ -n "$dryrun" ]; then
> > diff --git a/defaultenv-2/base/init/general b/defaultenv-2/base/init/general
> > index 98a92d1..e7fffdd 100644
> > --- a/defaultenv-2/base/init/general
> > +++ b/defaultenv-2/base/init/general
> > @@ -10,6 +10,3 @@ global.user=sha
> >
> > # timeout in seconds before the default boot entry is started
> > global.autoboot_timeout=3
> > -
> > -# default boot entry (one of /env/boot/*)
> > -global.boot.default=net
> > --
> > 1.7.10.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH 7/7] defaultenv-2: add boot sequence
2012-09-12 9:01 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-12 9:44 ` Sascha Hauer
2012-09-12 10:42 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-13 17:16 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 2 replies; 15+ messages in thread
From: Sascha Hauer @ 2012-09-12 9:44 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Wed, Sep 12, 2012 at 11:01:28AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 09:20 Wed 12 Sep , Sascha Hauer wrote:
> > On Tue, Sep 11, 2012 at 12:19:27PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > Boot will boot run sequentially the script in /env/boot.d
> > >
> > > diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> > > index 103eb87..68e9e89 100644
> > > --- a/defaultenv-2/base/bin/boot
> > > +++ b/defaultenv-2/base/bin/boot
> > > @@ -2,6 +2,8 @@
> > >
> > > verbose=
> > > dryrun=
> > > +# ensure sequence is init at something
> > > +sequence=t
> >
> > This looks unnecessary.
> I beleive it too but
> no as you run boot again the sequence keep the previous set I set it after
> trial
Then you must have exported it from the command line before calling the
script. Initializing variables is a good idea, but you should set it to
be empty.
> >
> > >
> > > usage="
> > > $0 [OPTIONS] [source]\n
> > > @@ -10,11 +12,27 @@ $0 [OPTIONS] [source]\n
> > > -l list boot sources\n
> > > -h help"
> > >
> > > +. /env/data/ansi-colors
> > > +
> > > for i in /env/boot/*; do
> > > basename $i s
> > > sources="$sources$s "
> > > done
> > >
> > > +if [ -d /env/boot.d ]; then
> > > + sources="$sources\n\nboot sequence:"
> > > + for i in /env/boot.d/*; do
> > > + readlink -f $i s
> > > + basename $s link
> > > + basename $i s
> > > + sources="$sources\n ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> > > + done
> > > +else
> > > + sequence=n
> > > + sources="$sources\n\nboot sequence:\nnone"
> > > + echo "${RED}WARNING: boot sequence: none${NC}"
-e missing here.
> > > +fi
> > > +
> > > while getopt "vdhl" opt; do
> > > if [ ${opt} = v ]; then
> > > if [ -n "$verbose" ]; then
> > > @@ -23,7 +41,7 @@ while getopt "vdhl" opt; do
> > > verbose="-v"
> > > fi
> > > elif [ ${opt} = d ]; then
> > > - dryrun=1
> > > + dryrun="-d"
> > > elif [ ${opt} = l ]; then
> > > echo -e "boot sources:\n$sources"
> > > exit 0
> > > @@ -37,18 +55,39 @@ done
> > > global -r linux.bootargs.dyn.
> > > global -r bootm.
> > >
> > > -if [ $# = 0 ]; then
> > > - scr="$global.boot.default"
> > > +if [ $# = 0 -a "x$sequence" = "xt" ]; then
> > > + sequence=y
> > > else
> > > scr="$1"
> > > fi
> >
> > You could merge the 'if [ -d /env/boot.d ]' above with this if/else. The
> > result would be easier to read IMO.
> > Also you don't seem to catch the case when no /env/boot.d/* exist and
> > nothing is given on the command line.
> the idea it to check bot /env/boot.d and /env/boot as you may want to boot
> something no in the boot sequence but for test as example
> >
> > >
> > > +if [ "x$sequence" = "xy" ]; then
> >
> > This x quirk is not necessary anymore. Do if [ "$sequence" = y ]
> > instead.
> >
> > > + if [ ! -d /env/boot.d ]; then
> > > + echo -e "${GREEN}boot sequence ${RED}none${NC}"
> > > + exit 1
> > > + fi
> > > + echo -e "${GREEN}Start boot sequence${NC}"
> > > + for i in /env/boot.d/*; do
> > > + readlink -f $i s
> > > + basename $s link
> > > + basename $i s
> > > + msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> > > + echo -e "${msg}"
> > > + boot $dryrun $s
> > > + echo -e "${msg} ${RED}failled${NC}"
> > > + ret=$?
> > > + done
> > > + echo -e "${GREEN}boot sequence ${RED}failled${NC}"
> >
> > s/failled/failed/
> >
> > > + exit $ret
> > > +fi
> > > +
> > > if [ -n "$scr" ]; then
> > > - if [ ! -f /env/boot/$scr ]; then
> > > - echo -e "/env/boot/$scr does not exist.Valid choices:\n$sources"
> > > + if [ ! -f /env/boot.d/$scr -a ! -f /env/boot/$scr ]; then
This check does not work as expected, probably a bug in the test
command.
Check out this:
#!/bin/sh
verbose=
dryrun=
usage="
$0 [OPTIONS] [source]\n
-v verbose\n
-d dryrun\n
-l list boot sources\n
-h help"
. /env/data/ansi-colors
for i in /env/boot/*; do
basename $i s
sources="$sources$s "
done
if [ -d /env/boot.d ]; then
sources="$sources\n\nboot sequence:"
for i in /env/boot.d/*; do
readlink -f $i s
basename $s link
basename $i s
sources="$sources\n ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
done
sequence=y
else
sources="$sources\n\nboot sequence:\nnone"
echo -e "${RED}WARNING: boot sequence: none${NC}"
sequence=n
fi
while getopt "vdhl" opt; do
if [ ${opt} = v ]; then
if [ -n "$verbose" ]; then
verbose="-v -v"
else
verbose="-v"
fi
elif [ ${opt} = d ]; then
dryrun="-d"
elif [ ${opt} = l ]; then
echo -e "boot sources:\n$sources"
exit 0
elif [ ${opt} = h ]; then
echo -e "$usage"
exit 0
fi
done
# clear linux.bootargs.dyn.* and bootm.*
global -r linux.bootargs.dyn.
global -r bootm.
if [ $# != 0 ]; then
sequence=n
fi
if [ "$sequence" = y ]; then
if [ ! -d /env/boot.d ]; then
echo -e "${GREEN}boot sequence ${RED}none${NC}"
exit 1
fi
echo -e "${GREEN}Start boot sequence${NC}"
for i in /env/boot.d/*; do
readlink -f $i s
basename $s link
basename $i s
msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
echo -e "${msg}"
boot $dryrun $s
echo -e "${msg} ${RED}failled${NC}"
ret=$?
done
echo -e "${GREEN}boot sequence ${RED}failed${NC}"
exit $ret
else
file=$1
scr=
echo -e "${GREEN}booting ${YELLOW}$file${NC}"
[ -f /env/boot.d/$file ] && scr=/env/boot.d/$file
[ -f /env/boot/$file ] && scr=/env/boot/$file
if [ -z "$scr" ]; then
echo -e "/env/boot/$file or /env/boot.d/$file does not exist. Valid choices:\n$sources"
exit
fi
/env/boot/$scr
fi
if [ -n "$dryrun" ]; then
exit 0
fi
bootm $verbose
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH 7/7] defaultenv-2: add boot sequence
2012-09-12 9:44 ` Sascha Hauer
@ 2012-09-12 10:42 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-12 10:55 ` Sascha Hauer
2012-09-13 17:16 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 1 reply; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-12 10:42 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 11:44 Wed 12 Sep , Sascha Hauer wrote:
> On Wed, Sep 12, 2012 at 11:01:28AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 09:20 Wed 12 Sep , Sascha Hauer wrote:
> > > On Tue, Sep 11, 2012 at 12:19:27PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > Boot will boot run sequentially the script in /env/boot.d
> > > >
> > > > diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> > > > index 103eb87..68e9e89 100644
> > > > --- a/defaultenv-2/base/bin/boot
> > > > +++ b/defaultenv-2/base/bin/boot
> > > > @@ -2,6 +2,8 @@
> > > >
> > > > verbose=
> > > > dryrun=
> > > > +# ensure sequence is init at something
> > > > +sequence=t
> > >
> > > This looks unnecessary.
> > I beleive it too but
> > no as you run boot again the sequence keep the previous set I set it after
> > trial
>
> Then you must have exported it from the command line before calling the
> script. Initializing variables is a good idea, but you should set it to
> be empty.
agreed except this does not work that's why I for to a value
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/7] defaultenv-2: add boot sequence
2012-09-12 10:42 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-12 10:55 ` Sascha Hauer
0 siblings, 0 replies; 15+ messages in thread
From: Sascha Hauer @ 2012-09-12 10:55 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Wed, Sep 12, 2012 at 12:42:34PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 11:44 Wed 12 Sep , Sascha Hauer wrote:
> > On Wed, Sep 12, 2012 at 11:01:28AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > On 09:20 Wed 12 Sep , Sascha Hauer wrote:
> > > > On Tue, Sep 11, 2012 at 12:19:27PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > > Boot will boot run sequentially the script in /env/boot.d
> > > > >
> > > > > diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> > > > > index 103eb87..68e9e89 100644
> > > > > --- a/defaultenv-2/base/bin/boot
> > > > > +++ b/defaultenv-2/base/bin/boot
> > > > > @@ -2,6 +2,8 @@
> > > > >
> > > > > verbose=
> > > > > dryrun=
> > > > > +# ensure sequence is init at something
> > > > > +sequence=t
> > > >
> > > > This looks unnecessary.
> > > I beleive it too but
> > > no as you run boot again the sequence keep the previous set I set it after
> > > trial
> >
> > Then you must have exported it from the command line before calling the
> > script. Initializing variables is a good idea, but you should set it to
> > be empty.
> agreed except this does not work that's why I for to a value
What exactly does not work? Can you give an example script and how you
call it?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 7/7] defaultenv-2: add boot sequence
2012-09-12 9:44 ` Sascha Hauer
2012-09-12 10:42 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-13 17:16 ` Jean-Christophe PLAGNIOL-VILLARD
1 sibling, 0 replies; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-13 17:16 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 11:44 Wed 12 Sep , Sascha Hauer wrote:
> On Wed, Sep 12, 2012 at 11:01:28AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 09:20 Wed 12 Sep , Sascha Hauer wrote:
> > > On Tue, Sep 11, 2012 at 12:19:27PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > > Boot will boot run sequentially the script in /env/boot.d
> > > >
> > > > diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> > > > index 103eb87..68e9e89 100644
> > > > --- a/defaultenv-2/base/bin/boot
> > > > +++ b/defaultenv-2/base/bin/boot
> > > > @@ -2,6 +2,8 @@
> > > >
> > > > verbose=
> > > > dryrun=
> > > > +# ensure sequence is init at something
> > > > +sequence=t
> > >
> > > This looks unnecessary.
> > I beleive it too but
> > no as you run boot again the sequence keep the previous set I set it after
> > trial
>
> Then you must have exported it from the command line before calling the
> script. Initializing variables is a good idea, but you should set it to
> be empty.
>
> > >
> > > >
> > > > usage="
> > > > $0 [OPTIONS] [source]\n
> > > > @@ -10,11 +12,27 @@ $0 [OPTIONS] [source]\n
> > > > -l list boot sources\n
> > > > -h help"
> > > >
> > > > +. /env/data/ansi-colors
> > > > +
> > > > for i in /env/boot/*; do
> > > > basename $i s
> > > > sources="$sources$s "
> > > > done
> > > >
> > > > +if [ -d /env/boot.d ]; then
> > > > + sources="$sources\n\nboot sequence:"
> > > > + for i in /env/boot.d/*; do
> > > > + readlink -f $i s
> > > > + basename $s link
> > > > + basename $i s
> > > > + sources="$sources\n ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> > > > + done
> > > > +else
> > > > + sequence=n
> > > > + sources="$sources\n\nboot sequence:\nnone"
> > > > + echo "${RED}WARNING: boot sequence: none${NC}"
>
> -e missing here.
>
> > > > +fi
> > > > +
> > > > while getopt "vdhl" opt; do
> > > > if [ ${opt} = v ]; then
> > > > if [ -n "$verbose" ]; then
> > > > @@ -23,7 +41,7 @@ while getopt "vdhl" opt; do
> > > > verbose="-v"
> > > > fi
> > > > elif [ ${opt} = d ]; then
> > > > - dryrun=1
> > > > + dryrun="-d"
> > > > elif [ ${opt} = l ]; then
> > > > echo -e "boot sources:\n$sources"
> > > > exit 0
> > > > @@ -37,18 +55,39 @@ done
> > > > global -r linux.bootargs.dyn.
> > > > global -r bootm.
> > > >
> > > > -if [ $# = 0 ]; then
> > > > - scr="$global.boot.default"
> > > > +if [ $# = 0 -a "x$sequence" = "xt" ]; then
> > > > + sequence=y
> > > > else
> > > > scr="$1"
> > > > fi
> > >
> > > You could merge the 'if [ -d /env/boot.d ]' above with this if/else. The
> > > result would be easier to read IMO.
> > > Also you don't seem to catch the case when no /env/boot.d/* exist and
> > > nothing is given on the command line.
> > the idea it to check bot /env/boot.d and /env/boot as you may want to boot
> > something no in the boot sequence but for test as example
>
> > >
> > > >
> > > > +if [ "x$sequence" = "xy" ]; then
> > >
> > > This x quirk is not necessary anymore. Do if [ "$sequence" = y ]
> > > instead.
> > >
> > > > + if [ ! -d /env/boot.d ]; then
> > > > + echo -e "${GREEN}boot sequence ${RED}none${NC}"
> > > > + exit 1
> > > > + fi
> > > > + echo -e "${GREEN}Start boot sequence${NC}"
> > > > + for i in /env/boot.d/*; do
> > > > + readlink -f $i s
> > > > + basename $s link
> > > > + basename $i s
> > > > + msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> > > > + echo -e "${msg}"
> > > > + boot $dryrun $s
> > > > + echo -e "${msg} ${RED}failled${NC}"
> > > > + ret=$?
> > > > + done
> > > > + echo -e "${GREEN}boot sequence ${RED}failled${NC}"
> > >
> > > s/failled/failed/
> > >
> > > > + exit $ret
> > > > +fi
> > > > +
> > > > if [ -n "$scr" ]; then
> > > > - if [ ! -f /env/boot/$scr ]; then
> > > > - echo -e "/env/boot/$scr does not exist.Valid choices:\n$sources"
> > > > + if [ ! -f /env/boot.d/$scr -a ! -f /env/boot/$scr ]; then
>
> This check does not work as expected, probably a bug in the test
> command.
>
> Check out this:
>
>
> #!/bin/sh
>
> verbose=
> dryrun=
>
> usage="
> $0 [OPTIONS] [source]\n
> -v verbose\n
> -d dryrun\n
> -l list boot sources\n
> -h help"
>
> . /env/data/ansi-colors
>
> for i in /env/boot/*; do
> basename $i s
> sources="$sources$s "
> done
>
> if [ -d /env/boot.d ]; then
> sources="$sources\n\nboot sequence:"
> for i in /env/boot.d/*; do
> readlink -f $i s
> basename $s link
> basename $i s
> sources="$sources\n ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> done
> sequence=y
> else
> sources="$sources\n\nboot sequence:\nnone"
> echo -e "${RED}WARNING: boot sequence: none${NC}"
> sequence=n
> fi
>
> while getopt "vdhl" opt; do
> if [ ${opt} = v ]; then
> if [ -n "$verbose" ]; then
> verbose="-v -v"
> else
> verbose="-v"
> fi
> elif [ ${opt} = d ]; then
> dryrun="-d"
> elif [ ${opt} = l ]; then
> echo -e "boot sources:\n$sources"
> exit 0
> elif [ ${opt} = h ]; then
> echo -e "$usage"
> exit 0
> fi
> done
>
> # clear linux.bootargs.dyn.* and bootm.*
> global -r linux.bootargs.dyn.
> global -r bootm.
>
> if [ $# != 0 ]; then
> sequence=n
> fi
>
> if [ "$sequence" = y ]; then
> if [ ! -d /env/boot.d ]; then
> echo -e "${GREEN}boot sequence ${RED}none${NC}"
> exit 1
> fi
> echo -e "${GREEN}Start boot sequence${NC}"
> for i in /env/boot.d/*; do
> readlink -f $i s
> basename $s link
> basename $i s
> msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> echo -e "${msg}"
> boot $dryrun $s
> echo -e "${msg} ${RED}failled${NC}"
> ret=$?
> done
> echo -e "${GREEN}boot sequence ${RED}failed${NC}"
> exit $ret
> else
> file=$1
> scr=
> echo -e "${GREEN}booting ${YELLOW}$file${NC}"
> [ -f /env/boot.d/$file ] && scr=/env/boot.d/$file
> [ -f /env/boot/$file ] && scr=/env/boot/$file
>
> if [ -z "$scr" ]; then
> echo -e "/env/boot/$file or /env/boot.d/$file does not exist. Valid choices:\n$sources"
> exit
> fi
> /env/boot/$scr
$src
and it work
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/7] globalbar: add inline when not enabled
2012-09-11 10:19 [PATCH 1/7] globalbar: add inline when not enabled Jean-Christophe PLAGNIOL-VILLARD
` (5 preceding siblings ...)
2012-09-11 10:19 ` [PATCH 7/7] defaultenv-2: add boot sequence Jean-Christophe PLAGNIOL-VILLARD
@ 2012-09-11 11:21 ` Sascha Hauer
2012-09-11 12:12 ` Jean-Christophe PLAGNIOL-VILLARD
6 siblings, 1 reply; 15+ messages in thread
From: Sascha Hauer @ 2012-09-11 11:21 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
Repeating my comment I made last time:
Subject: s/globalbar/globalvar/
Sascha
On Tue, Sep 11, 2012 at 12:19:21PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> include/globalvar.h | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/include/globalvar.h b/include/globalvar.h
> index 7cc3976..a127a05 100644
> --- a/include/globalvar.h
> +++ b/include/globalvar.h
> @@ -1,6 +1,7 @@
> #ifndef __GLOBALVAR_H
> #define __GLOBALVAR_H
>
> +#ifdef CONFIG_GLOBALVAR
> int globalvar_add_simple(const char *name);
>
> int globalvar_add(const char *name,
> @@ -8,5 +9,24 @@ int globalvar_add(const char *name,
> const char *(*get)(struct device_d *, struct param_d *p),
> unsigned long flags);
> char *globalvar_get_match(const char *match, const char *seperator);
> +#else
> +static inline int globalvar_add_simple(const char *name)
> +{
> + return 0;
> +}
> +
> +static inline int globalvar_add(const char *name,
> + int (*set)(struct device_d *dev, struct param_d *p, const char *val),
> + const char *(*get)(struct device_d *, struct param_d *p),
> + unsigned long flags)
> +{
> + return 0;
> +}
> +
> +static inline char *globalvar_get_match(const char *match, const char *seperator)
> +{
> + return NULL;
> +}
> +#endif
>
> #endif /* __GLOBALVAR_H */
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH 1/7] globalbar: add inline when not enabled
2012-09-11 11:21 ` [PATCH 1/7] globalbar: add inline when not enabled Sascha Hauer
@ 2012-09-11 12:12 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 15+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-09-11 12:12 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 13:21 Tue 11 Sep , Sascha Hauer wrote:
> Repeating my comment I made last time:
>
> Subject: s/globalbar/globalvar/
>
I change the oherone forget this one tag updated
Best Regards,
J.
> Sascha
>
> On Tue, Sep 11, 2012 at 12:19:21PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> > include/globalvar.h | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> > diff --git a/include/globalvar.h b/include/globalvar.h
> > index 7cc3976..a127a05 100644
> > --- a/include/globalvar.h
> > +++ b/include/globalvar.h
> > @@ -1,6 +1,7 @@
> > #ifndef __GLOBALVAR_H
> > #define __GLOBALVAR_H
> >
> > +#ifdef CONFIG_GLOBALVAR
> > int globalvar_add_simple(const char *name);
> >
> > int globalvar_add(const char *name,
> > @@ -8,5 +9,24 @@ int globalvar_add(const char *name,
> > const char *(*get)(struct device_d *, struct param_d *p),
> > unsigned long flags);
> > char *globalvar_get_match(const char *match, const char *seperator);
> > +#else
> > +static inline int globalvar_add_simple(const char *name)
> > +{
> > + return 0;
> > +}
> > +
> > +static inline int globalvar_add(const char *name,
> > + int (*set)(struct device_d *dev, struct param_d *p, const char *val),
> > + const char *(*get)(struct device_d *, struct param_d *p),
> > + unsigned long flags)
> > +{
> > + return 0;
> > +}
> > +
> > +static inline char *globalvar_get_match(const char *match, const char *seperator)
> > +{
> > + return NULL;
> > +}
> > +#endif
> >
> > #endif /* __GLOBALVAR_H */
> > --
> > 1.7.10.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread