From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] devicetree probe support
Date: Wed, 12 Sep 2012 22:06:32 +0200 [thread overview]
Message-ID: <1347480407-16865-1-git-send-email-s.hauer@pengutronix.de> (raw)
Hi All,
The following patch series adds support for probing barebox from
devicetree.
Most of the of helper code is taken directly from the Linux Kernel,
only little glue code is needed to populate the barebox devicetree
from a dtb.
Currently the dtb can be probed with 'oftree -p <dtb>'. After calling
this command the devices found in the dtb are probed. Devices which
were present before are not probed again, instead the corresponding
device nodes are attached to the barebox devices.
Further directions could be that barebox takes the dtb directly from
a first stage loader, so a second stage barebox could be started just
like a Linux Kernel. I have some experimental code for that. Another
possibility would be to compile a dtb into barebox, but this is not
done yet.
This series contains support for the basic probing, GPIO, SPI and
several i.MX devices. The devicetree probe support nearly compiles
away if disabled and takes about 6k in an uncompressed image when
enabled.
Here is an example session:
barebox@Phytec phyCORE-i.MX27:/ oftree -p mnt/tftp/sha-oftree-pcm038
barebox@Phytec phyCORE-i.MX27:/ devinfo 1000c000.serial
resources:
num : 0
start : 0x1000c000
size : 0x00001000
driver: imx_serial
no info available for 1000c000.serial
no parameters available
device node: /soc/aipi@10000000/serial@1000c000
serial@1000c000 {
compatible: "fsl,imx27-uart", "fsl,imx21-uart"
reg: <0x1000c000 0x1000>
interrupts: <0x12>
status: "okay"
fsl,uart-has-rtscts:
};
Sascha
The following changes since commit c9556d4a54db100a1786506ce199c86d3b231a3b:
drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch (2012-09-11 16:10:23 +0200)
are available in the git repository at:
git://git.pengutronix.de/git/barebox.git work/dt
for you to fetch changes up to c931520ecb121b299bf362b4c2481fc5f7e232cc:
ARM i.MX: Add devicetree support for clocksource driver (2012-09-12 21:32:29 +0200)
----------------------------------------------------------------
Sascha Hauer (15):
driver: add dev_get_drvdata function
of: add devicetree probing support
oftree command: Add devicetree probe support
of: Add devicetree partition parsing
spi: add oftree support
ARM i.MX: Use platform_device_id for gpio driver
ARM i.MX: implement clocksource as driver
serial i.MX: oftree support
net fec_imx: oftree support
spi imx: dt support
mfd mc13xxx: Add devicetree support
cfi-flash: Add devicetree probe support
mci i.MX esdhc: Add oftree support
ARM i.MX: add devicetree support for gpio driver
ARM i.MX: Add devicetree support for clocksource driver
arch/arm/mach-imx/clocksource.c | 85 ++-
arch/arm/mach-imx/gpio.c | 111 +++-
arch/arm/mach-imx/imx1.c | 9 +-
arch/arm/mach-imx/imx21.c | 13 +-
arch/arm/mach-imx/imx25.c | 10 +-
arch/arm/mach-imx/imx27.c | 15 +-
arch/arm/mach-imx/imx31.c | 7 +-
arch/arm/mach-imx/imx35.c | 7 +-
arch/arm/mach-imx/imx51.c | 9 +-
arch/arm/mach-imx/imx53.c | 16 +-
arch/arm/mach-imx/imx6.c | 15 +-
arch/arm/mach-imx/include/mach/imx1-regs.h | 23 -
arch/arm/mach-imx/include/mach/imx21-regs.h | 24 -
arch/arm/mach-imx/include/mach/imx25-regs.h | 27 -
arch/arm/mach-imx/include/mach/imx27-regs.h | 23 -
arch/arm/mach-imx/include/mach/imx31-regs.h | 27 -
arch/arm/mach-imx/include/mach/imx35-regs.h | 28 -
arch/arm/mach-imx/include/mach/imx51-regs.h | 19 -
arch/arm/mach-imx/include/mach/imx53-regs.h | 19 -
arch/arm/mach-imx/include/mach/imx6-regs.h | 19 -
commands/Kconfig | 12 +-
commands/oftree.c | 28 +-
common/oftree.c | 4 +-
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/base/driver.c | 35 +-
drivers/base/platform.c | 5 +
drivers/mci/imx-esdhc.c | 25 +-
drivers/mfd/mc13xxx.c | 12 +
drivers/net/fec_imx.c | 34 +-
drivers/nor/cfi_flash.c | 29 +-
drivers/of/Kconfig | 2 +
drivers/of/Makefile | 3 +
drivers/of/base.c | 802 +++++++++++++++++++++++++++
drivers/of/gpio.c | 28 +
drivers/of/partition.c | 64 +++
drivers/serial/serial_imx.c | 17 +-
drivers/spi/imx_spi.c | 49 +-
drivers/spi/spi.c | 34 +-
include/driver.h | 10 +
include/of.h | 113 ++++
include/spi/spi.h | 6 +
42 files changed, 1493 insertions(+), 327 deletions(-)
create mode 100644 drivers/of/Kconfig
create mode 100644 drivers/of/Makefile
create mode 100644 drivers/of/base.c
create mode 100644 drivers/of/gpio.c
create mode 100644 drivers/of/partition.c
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-09-12 20:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-12 20:06 Sascha Hauer [this message]
2012-09-12 20:06 ` [PATCH 01/15] driver: add dev_get_drvdata function Sascha Hauer
2012-09-12 20:06 ` [PATCH 02/15] of: add devicetree probing support Sascha Hauer
2012-09-18 15:48 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-12 20:06 ` [PATCH 03/15] oftree command: Add devicetree probe support Sascha Hauer
2012-09-12 20:06 ` [PATCH 04/15] of: Add devicetree partition parsing Sascha Hauer
2012-09-12 20:06 ` [PATCH 05/15] spi: add oftree support Sascha Hauer
2012-09-12 20:06 ` [PATCH 06/15] ARM i.MX: Use platform_device_id for gpio driver Sascha Hauer
2012-09-12 20:06 ` [PATCH 07/15] ARM i.MX: implement clocksource as driver Sascha Hauer
2012-09-17 16:17 ` Sascha Hauer
2012-09-12 20:06 ` [PATCH 08/15] serial i.MX: oftree support Sascha Hauer
2012-09-12 20:06 ` [PATCH 09/15] net fec_imx: " Sascha Hauer
2012-09-12 20:06 ` [PATCH 10/15] spi imx: dt support Sascha Hauer
2012-09-12 20:06 ` [PATCH 11/15] mfd mc13xxx: Add devicetree support Sascha Hauer
2012-09-12 20:06 ` [PATCH 12/15] cfi-flash: Add devicetree probe support Sascha Hauer
2012-09-12 20:06 ` [PATCH 13/15] mci i.MX esdhc: Add oftree support Sascha Hauer
2012-09-12 20:06 ` [PATCH 14/15] ARM i.MX: add devicetree support for gpio driver Sascha Hauer
2012-09-12 20:06 ` [PATCH 15/15] ARM i.MX: Add devicetree support for clocksource driver Sascha Hauer
2012-09-20 18:45 ` [PATCH] devicetree probe support Jean-Christophe PLAGNIOL-VILLARD
2012-09-20 18:51 ` [PATCH 1/1] fb: add it's own bus for fb devices Jean-Christophe PLAGNIOL-VILLARD
2012-09-20 21:17 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347480407-16865-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox