From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 5.mo5.mail-out.ovh.net ([87.98.173.103] helo=mo5.mail-out.ovh.net) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TFMkF-0006c8-3Q for barebox@lists.infradead.org; Sat, 22 Sep 2012 10:15:38 +0000 Received: from mail404.ha.ovh.net (b9.ovh.net [213.186.33.59]) by mo5.mail-out.ovh.net (Postfix) with SMTP id AC2E2FFAB64 for ; Sat, 22 Sep 2012 12:21:22 +0200 (CEST) From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 22 Sep 2012 12:12:54 +0200 Message-Id: <1348308774-32378-1-git-send-email-plagnioj@jcrosoft.com> In-Reply-To: <20120922100757.GR26553@game.jcrosoft.org> References: <20120922100757.GR26553@game.jcrosoft.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/1] net: introduce phylib To: barebox@lists.infradead.org Adapt phylib from linux switch all the driver to it reimplement mii bus This will allow to have - phy drivers - to only connect the phy at then opening of the device - if the phy is not ready or not up fail on open Same behaviour as in linux and will allow to share code and simplify porting. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/boards/freescale-mx6-arm2/board.c | 43 +- arch/arm/boards/freescale-mx6-sabrelite/board.c | 40 +- arch/arm/configs/phycard_a_l1_defconfig | 2 +- arch/arm/configs/tx51stk5_defconfig | 2 +- drivers/net/Kconfig | 30 +- drivers/net/Makefile | 2 +- drivers/net/altera_tse.c | 48 +- drivers/net/altera_tse.h | 3 +- drivers/net/at91_ether.c | 49 +- drivers/net/designware.c | 62 ++- drivers/net/dm9k.c | 50 +- drivers/net/ep93xx.c | 35 +- drivers/net/ep93xx.h | 2 +- drivers/net/fec_imx.c | 89 +-- drivers/net/fec_imx.h | 6 +- drivers/net/fec_mpc5200.c | 54 +- drivers/net/fec_mpc5200.h | 4 +- drivers/net/gianfar.c | 61 +- drivers/net/gianfar.h | 2 +- drivers/net/ks8851_mll.c | 36 +- drivers/net/macb.c | 79 +-- drivers/net/miidev.c | 316 ----------- drivers/net/netx_eth.c | 26 +- drivers/net/phy/Kconfig | 17 + drivers/net/phy/Makefile | 2 + include/fec.h => drivers/net/phy/generic.c | 43 +- drivers/net/phy/mdio_bus.c | 250 +++++++++ drivers/net/phy/phy.c | 568 +++++++++++++++++++ drivers/net/smc91111.c | 47 +- drivers/net/smc911x.c | 37 +- drivers/net/usb/Kconfig | 4 +- drivers/net/usb/asix.c | 29 +- drivers/net/usb/smsc95xx.c | 41 +- drivers/net/usb/usbnet.c | 11 +- include/fec.h | 3 + include/linux/ethtool.h | 114 ++++ include/linux/mii.h | 675 +++++++++++++++-------- include/linux/phy.h | 266 +++++++++ include/miidev.h | 51 +- include/net.h | 4 + include/usb/usbnet.h | 5 +- net/eth.c | 8 +- 42 files changed, 2140 insertions(+), 1076 deletions(-) delete mode 100644 drivers/net/miidev.c create mode 100644 drivers/net/phy/Kconfig create mode 100644 drivers/net/phy/Makefile copy include/fec.h => drivers/net/phy/generic.c (53%) create mode 100644 drivers/net/phy/mdio_bus.c create mode 100644 drivers/net/phy/phy.c create mode 100644 include/linux/ethtool.h rewrite include/linux/mii.h (70%) create mode 100644 include/linux/phy.h diff --git a/arch/arm/boards/freescale-mx6-arm2/board.c b/arch/arm/boards/freescale-mx6-arm2/board.c index e4a9a49..0e853a6 100644 --- a/arch/arm/boards/freescale-mx6-arm2/board.c +++ b/arch/arm/boards/freescale-mx6-arm2/board.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include @@ -104,50 +104,39 @@ static int arm2_mem_init(void) } mem_initcall(arm2_mem_init); -static struct fec_platform_data fec_info = { - .xcv_type = RGMII, - .phy_addr = 0, -}; - -static int mx6_rgmii_rework(void) +static void mx6_rgmii_rework(struct phy_device *dev) { - struct mii_device *mdev; u16 val; - mdev = mii_open("phy0"); - if (!mdev) { - printf("unable to open phy0\n"); - return -ENODEV; - } - /* To enable AR8031 ouput a 125MHz clk from CLK_25M */ - mii_write(mdev, mdev->address, 0xd, 0x7); - mii_write(mdev, mdev->address, 0xe, 0x8016); - mii_write(mdev, mdev->address, 0xd, 0x4007); + phy_write(dev, 0xd, 0x7); + phy_write(dev, 0xe, 0x8016); + phy_write(dev, 0xd, 0x4007); - val = mii_read(mdev, mdev->address, 0xe); + val = phy_read(dev, 0xe); val &= 0xffe3; val |= 0x18; - mii_write(mdev, mdev->address, 0xe, val); + phy_write(dev, 0xe, val); /* introduce tx clock delay */ - mii_write(mdev, mdev->address, 0x1d, 0x5); + phy_write(dev, 0x1d, 0x5); - val = mii_read(mdev, mdev->address, 0x1e); + val = phy_read(dev, 0x1e); val |= 0x0100; - mii_write(mdev, mdev->address, 0x1e, val); - - mii_close(mdev); - - return 0; + phy_write(dev, 0x1e, val); } +static struct fec_platform_data fec_info = { + .xcv_type = RGMII, + .phy_init = mx6_rgmii_rework, + .phy_addr = 0, +}; + static int arm2_devices_init(void) { imx6_add_mmc3(NULL); imx6_add_fec(&fec_info); - mx6_rgmii_rework(); armlinux_set_bootparams((void *)0x10000100); armlinux_set_architecture(3837); diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c index c5bcf8b..6070e2e 100644 --- a/arch/arm/boards/freescale-mx6-sabrelite/board.c +++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include #include @@ -136,38 +136,27 @@ static int sabrelite_mem_init(void) } mem_initcall(sabrelite_mem_init); -static struct fec_platform_data fec_info = { - .xcv_type = RGMII, - .phy_addr = 6, -}; - -int mx6_rgmii_rework(void) +static void mx6_rgmii_rework(struct phy_device *dev) { - struct mii_device *mdev; - - mdev = mii_open("phy0"); - if (!mdev) { - printf("unable to open phy0\n"); - return -ENODEV; - } - - mii_write(mdev, mdev->address, 0x09, 0x0f00); + phy_write(dev, 0x09, 0x0f00); /* do same as linux kernel */ /* min rx data delay */ - mii_write(mdev, mdev->address, 0x0b, 0x8105); - mii_write(mdev, mdev->address, 0x0c, 0x0000); + phy_write(dev, 0x0b, 0x8105); + phy_write(dev, 0x0c, 0x0000); /* max rx/tx clock delay, min rx/tx control delay */ - mii_write(mdev, mdev->address, 0x0b, 0x8104); - mii_write(mdev, mdev->address, 0x0c, 0xf0f0); - mii_write(mdev, mdev->address, 0x0b, 0x104); - - mii_close(mdev); - - return 0; + phy_write(dev, 0x0b, 0x8104); + phy_write(dev, 0x0c, 0xf0f0); + phy_write(dev, 0x0b, 0x104); } +static struct fec_platform_data fec_info = { + .xcv_type = RGMII, + .phy_init = mx6_rgmii_rework, + .phy_addr = 6, +}; + static int sabrelite_ksz9021rn_setup(void) { mxc_iomux_v3_setup_multiple_pads(sabrelite_enet_pads, ARRAY_SIZE(sabrelite_enet_pads)); @@ -266,7 +255,6 @@ static int sabrelite_devices_init(void) sabrelite_ksz9021rn_setup(); imx6_iim_register_fec_ethaddr(); imx6_add_fec(&fec_info); - mx6_rgmii_rework(); sabrelite_ehci_init(); diff --git a/arch/arm/configs/phycard_a_l1_defconfig b/arch/arm/configs/phycard_a_l1_defconfig index cf980f7..4cf2d21 100644 --- a/arch/arm/configs/phycard_a_l1_defconfig +++ b/arch/arm/configs/phycard_a_l1_defconfig @@ -134,7 +134,7 @@ CONFIG_NET_NETCONSOLE=y CONFIG_NET_RESOLV=y CONFIG_DRIVER_SERIAL_NS16550=y CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y -CONFIG_MIIDEV=y +CONFIG_PHYLIB=y CONFIG_DRIVER_NET_SMC911X=y CONFIG_DRIVER_NET_SMC911X_ADDRESS_SHIFT=0 CONFIG_SPI=n diff --git a/arch/arm/configs/tx51stk5_defconfig b/arch/arm/configs/tx51stk5_defconfig index 7fff0f0..2c83189 100644 --- a/arch/arm/configs/tx51stk5_defconfig +++ b/arch/arm/configs/tx51stk5_defconfig @@ -110,7 +110,7 @@ CONFIG_NET_TFTP=y CONFIG_NET_TFTP_PUSH=y CONFIG_DRIVER_SERIAL_IMX=y CONFIG_ARCH_HAS_FEC_IMX=y -CONFIG_MIIDEV=y +CONFIG_PHYLIB=y CONFIG_DRIVER_NET_FEC_IMX=y CONFIG_DRIVER_SPI_IMX_2_3=y CONFIG_MTD=y diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3c5f729..99757d3 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -19,26 +19,28 @@ config HAS_DESIGNWARE_ETH config ARCH_HAS_FEC_IMX bool -config MIIDEV +config PHYLIB bool menu "Network drivers " depends on NET +source "drivers/net/phy/Kconfig" + config DRIVER_NET_CS8900 bool "cs8900 ethernet driver" depends on HAS_CS8900 config DRIVER_NET_SMC911X bool "smc911x ethernet driver" - select MIIDEV + select PHYLIB help This option enables support for the SMSC LAN9[12]1[567] ethernet chip. config DRIVER_NET_SMC91111 bool "smc91111 ethernet driver" - select MIIDEV + select PHYLIB help This option enables support for the SMSC LAN91C111 ethernet chip. @@ -46,37 +48,37 @@ config DRIVER_NET_SMC91111 config DRIVER_NET_DM9K bool "Davicom dm9k[E|A|B] ethernet driver" depends on HAS_DM9000 - select MIIDEV + select PHYLIB config DRIVER_NET_NETX bool "Hilscher Netx ethernet driver" depends on HAS_NETX_ETHER - select MIIDEV + select PHYLIB config DRIVER_NET_AT91_ETHER bool "at91 ethernet driver" depends on HAS_AT91_ETHER - select MIIDEV + select PHYLIB config DRIVER_NET_MPC5200 bool "MPC5200 Ethernet driver" depends on ARCH_MPC5200 - select MIIDEV + select PHYLIB config DRIVER_NET_FEC_IMX bool "i.MX FEC Ethernet driver" depends on ARCH_HAS_FEC_IMX - select MIIDEV + select PHYLIB config DRIVER_NET_EP93XX bool "EP93xx Ethernet driver" depends on ARCH_EP93XX - select MIIDEV + select PHYLIB config DRIVER_NET_MACB bool "macb Ethernet driver" depends on HAS_MACB - select MIIDEV + select PHYLIB config DRIVER_NET_TAP bool "tap Ethernet driver" @@ -85,7 +87,7 @@ config DRIVER_NET_TAP config DRIVER_NET_TSE depends on NIOS2 bool "Altera TSE ethernet driver" - select MIIDEV + select PHYLIB help This option enables support for the Altera TSE MAC. @@ -100,14 +102,14 @@ config TSE_USE_DEDICATED_DESC_MEM config DRIVER_NET_KS8851_MLL bool "ks8851 mll ethernet driver" - select MIIDEV + select PHYLIB help This option enables support for the Micrel KS8851 MLL ethernet chip. config DRIVER_NET_DESIGNWARE bool "Designware Universal MAC ethernet driver" - select MIIDEV + select PHYLIB depends on HAS_DESIGNWARE_ETH help This option enables support for the Synopsys @@ -121,7 +123,7 @@ config DRIVER_NET_DESIGNWARE_ALTDESCRIPTOR config DRIVER_NET_GIANFAR bool "Gianfar Ethernet" depends on ARCH_MPC85XX - select MIIDEV + select PHYLIB source "drivers/net/usb/Kconfig" diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4d960e8..4939b7f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_DRIVER_NET_FEC_IMX) += fec_imx.o obj-$(CONFIG_DRIVER_NET_EP93XX) += ep93xx.o obj-$(CONFIG_DRIVER_NET_MACB) += macb.o obj-$(CONFIG_DRIVER_NET_TAP) += tap.o -obj-$(CONFIG_MIIDEV) += miidev.o +obj-$(CONFIG_PHYLIB) += phy/ obj-$(CONFIG_NET_USB) += usb/ obj-$(CONFIG_DRIVER_NET_TSE) += altera_tse.o obj-$(CONFIG_DRIVER_NET_KS8851_MLL) += ks8851_mll.o diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c index 5353a68..aedd5da 100644 --- a/drivers/net/altera_tse.c +++ b/drivers/net/altera_tse.c @@ -26,10 +26,10 @@ #include #include -#include #include #include #include +#include #include #include @@ -247,10 +247,9 @@ static int tse_set_ethaddr(struct eth_device *edev, unsigned char *m) return 0; } -static int tse_phy_read(struct mii_device *mdev, int phy_addr, int reg) +static int tse_phy_read(struct mii_bus *bus, int phy_addr, int reg) { - struct eth_device *edev = mdev->edev; - struct altera_tse_priv *priv = edev->priv; + struct altera_tse_priv *priv = bus->priv; struct alt_tse_mac *mac_dev = priv->tse_regs; uint32_t *mdio_regs; @@ -261,10 +260,9 @@ static int tse_phy_read(struct mii_device *mdev, int phy_addr, int reg) return readl(&mdio_regs[reg]) & 0xFFFF; } -static int tse_phy_write(struct mii_device *mdev, int phy_addr, int reg, int val) +static int tse_phy_write(struct mii_bus *bus, int phy_addr, int reg, u16 val) { - struct eth_device *edev = mdev->edev; - struct altera_tse_priv *priv = edev->priv; + struct altera_tse_priv *priv = bus->priv; struct alt_tse_mac *mac_dev = priv->tse_regs; uint32_t *mdio_regs; @@ -347,9 +345,12 @@ static void tse_reset(struct eth_device *edev) static int tse_eth_open(struct eth_device *edev) { struct altera_tse_priv *priv = edev->priv; + int ret; - miidev_wait_aneg(priv->miidev); - miidev_print_status(priv->miidev); + ret = phy_device_connect(edev, priv->miibus, priv->phy_addr, NULL, 0, + PHY_INTERFACE_MODE_NA); + if (ret) + return ret; return 0; } @@ -488,15 +489,13 @@ static int tse_init_dev(struct eth_device *edev) /* enable MAC */ writel(ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK, &mac_dev->command_config); - miidev_restart_aneg(priv->miidev); - return 0; } static int tse_probe(struct device_d *dev) { struct altera_tse_priv *priv; - struct mii_device *miidev; + struct mii_bus *miibus; struct eth_device *edev; struct alt_sgdma_descriptor *rx_desc; struct alt_sgdma_descriptor *tx_desc; @@ -505,7 +504,7 @@ static int tse_probe(struct device_d *dev) #endif edev = xzalloc(sizeof(struct eth_device)); priv = xzalloc(sizeof(struct altera_tse_priv)); - miidev = xzalloc(sizeof(struct mii_device)); + miibus = xzalloc(sizeof(struct mii_bus)); edev->priv = priv; @@ -527,7 +526,7 @@ static int tse_probe(struct device_d *dev) if (!tx_desc) { free(edev); - free(miidev); + free(miibus); return 0; } #endif @@ -541,22 +540,19 @@ static int tse_probe(struct device_d *dev) priv->rx_desc = rx_desc; priv->tx_desc = tx_desc; - priv->miidev = miidev; + priv->miibus = miibus; - miidev->read = tse_phy_read; - miidev->write = tse_phy_write; - miidev->flags = 0; - miidev->edev = edev; - miidev->parent = dev; + miibus->read = tse_phy_read; + miibus->write = tse_phy_write; + miibus->priv = priv; + miibus->parent = dev; if (dev->platform_data != NULL) - miidev->address = *((int8_t *)(dev->platform_data)); - else { - printf("No PHY address specified.\n"); - return -ENODEV; - } + priv->phy_addr = *((int8_t *)(dev->platform_data)); + else + priv->phy_addr = -1; - mii_register(miidev); + mdiobus_register(miibus); return eth_register(edev); } diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h index 866dbce..5a66a7d 100644 --- a/drivers/net/altera_tse.h +++ b/drivers/net/altera_tse.h @@ -292,7 +292,8 @@ struct altera_tse_priv { void __iomem *sgdma_tx_regs; void __iomem *rx_desc; void __iomem *tx_desc; - struct mii_device *miidev; + int phy_addr; + struct mii_bus *miibus; }; #endif /* _ALTERA_TSE_H_ */ diff --git a/drivers/net/at91_ether.c b/drivers/net/at91_ether.c index 3592141..13ca745 100644 --- a/drivers/net/at91_ether.c +++ b/drivers/net/at91_ether.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -40,18 +39,18 @@ #include #include #include +#include #include "at91_ether.h" -#define SPEED_100 1 -#define DUPLEX_FULL 1 - struct ether_device { struct eth_device netdev; - struct mii_device miidev; + struct mii_bus miibus; struct rbf_t *rbfp; struct rbf_t *rbfdt; unsigned char *rbf_framebuf; + int phy_addr; + phy_interface_t interface; }; #define to_ether(_nd) container_of(_nd, struct ether_device, netdev) @@ -98,7 +97,7 @@ static inline int at91_phy_wait(void) return 0; } -static int at91_ether_mii_read(struct mii_device *dev, int addr, int reg) +static int at91_ether_mii_read(struct mii_bus *dev, int addr, int reg) { int value; @@ -120,7 +119,7 @@ out: return value; } -static int at91_ether_mii_write(struct mii_device *dev, int addr, int reg, int val) +static int at91_ether_mii_write(struct mii_bus *dev, int addr, int reg, u16 val) { int ret; @@ -136,19 +135,19 @@ static int at91_ether_mii_write(struct mii_device *dev, int addr, int reg, int v return ret; } -static void update_linkspeed(struct mii_device *dev, int speed, int duplex) +static void update_linkspeed(struct eth_device *edev) { unsigned int mac_cfg; /* Update the MAC */ mac_cfg = at91_emac_read(AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD); - if (speed == SPEED_100) { - if (duplex == DUPLEX_FULL) /* 100 Full Duplex */ + if (edev->phydev->speed == SPEED_100) { + if (edev->phydev->duplex) mac_cfg |= AT91_EMAC_SPD | AT91_EMAC_FD; else /* 100 Half Duplex */ mac_cfg |= AT91_EMAC_SPD; } else { - if (duplex == DUPLEX_FULL) /* 10 Full Duplex */ + if (edev->phydev->duplex) mac_cfg |= AT91_EMAC_FD; else {} /* 10 Half Duplex */ } @@ -161,11 +160,12 @@ static int at91_ether_open(struct eth_device *edev) unsigned long ctl; struct ether_device *etdev = to_ether(edev); unsigned char *rbf_framebuf = etdev->rbf_framebuf; + int ret; - miidev_wait_aneg(&etdev->miidev); - miidev_print_status(&etdev->miidev); - - update_linkspeed(&etdev->miidev, SPEED_100, DUPLEX_FULL); + ret = phy_device_connect(edev, &etdev->miibus, etdev->phy_addr, + update_linkspeed, 0, etdev->interface); + if (ret) + return ret; /* Clear internal statistics */ ctl = at91_emac_read(AT91_EMAC_CTL); @@ -299,7 +299,7 @@ static int at91_ether_probe(struct device_d *dev) unsigned int mac_cfg; struct ether_device *ether_dev; struct eth_device *edev; - struct mii_device *miidev; + struct mii_bus *miibus; unsigned long ether_hz; struct clk *pclk; struct at91_ether_platform_data *pdata; @@ -314,7 +314,7 @@ static int at91_ether_probe(struct device_d *dev) ether_dev = xzalloc(sizeof(struct ether_device)); edev = ðer_dev->netdev; - miidev = ðer_dev->miidev; + miibus = ðer_dev->miibus; edev->priv = ether_dev; edev->init = at91_ether_init; @@ -327,10 +327,9 @@ static int at91_ether_probe(struct device_d *dev) ether_dev->rbf_framebuf = dma_alloc_coherent(MAX_RX_DESCR * MAX_RBUFF_SZ); ether_dev->rbfdt = dma_alloc_coherent(sizeof(struct rbf_t) * MAX_RX_DESCR); - miidev->address = pdata->phy_addr; - miidev->read = at91_ether_mii_read; - miidev->write = at91_ether_mii_write; - miidev->edev = edev; + ether_dev->phy_addr = pdata->phy_addr; + miibus->read = at91_ether_mii_read; + miibus->write = at91_ether_mii_write; /* Sanitize the clocks */ mac_cfg = at91_emac_read(AT91_EMAC_CFG); @@ -347,12 +346,16 @@ static int at91_ether_probe(struct device_d *dev) mac_cfg |= AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG; - if (pdata->flags & AT91SAM_ETHER_RMII) + if (pdata->flags & AT91SAM_ETHER_RMII) { + ether_dev->interface = PHY_INTERFACE_MODE_RGMII; mac_cfg |= AT91_EMAC_RMII; + } else { + ether_dev->interface = PHY_INTERFACE_MODE_MII; + } at91_emac_write(AT91_EMAC_CFG, mac_cfg); - mii_register(miidev); + mdiobus_register(miibus); eth_register(edev); return 0; diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 379b4e3..2a87d26 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -29,15 +29,15 @@ #include #include #include -#include #include #include +#include #include "designware.h" struct dw_eth_dev { struct eth_device netdev; - struct mii_device miidev; + struct mii_bus miibus; void (*fix_mac_speed)(int speed); u8 macaddr[6]; @@ -52,6 +52,7 @@ struct dw_eth_dev { struct eth_mac_regs *mac_regs_p; struct eth_dma_regs *dma_regs_p; + int phy_addr; }; /* Speed specific definitions */ @@ -64,9 +65,9 @@ struct dw_eth_dev { #define FULL_DUPLEX 2 -static int dwc_ether_mii_read(struct mii_device *dev, int addr, int reg) +static int dwc_ether_mii_read(struct mii_bus *dev, int addr, int reg) { - struct dw_eth_dev *priv = dev->edev->priv; + struct dw_eth_dev *priv = dev->priv; struct eth_mac_regs *mac_p = priv->mac_regs_p; u64 start; u32 miiaddr; @@ -86,9 +87,9 @@ static int dwc_ether_mii_read(struct mii_device *dev, int addr, int reg) return readl(&mac_p->miidata) & 0xffff; } -static int dwc_ether_mii_write(struct mii_device *dev, int addr, int reg, int val) +static int dwc_ether_mii_write(struct mii_bus *dev, int addr, int reg, u16 val) { - struct dw_eth_dev *priv = dev->edev->priv; + struct dw_eth_dev *priv = dev->priv; struct eth_mac_regs *mac_p = priv->mac_regs_p; u64 start; u32 miiaddr; @@ -222,34 +223,37 @@ static int dwc_ether_init(struct eth_device *dev) return 0; } -static int dwc_ether_open(struct eth_device *dev) +static void dwc_update_linkspeed(struct eth_device *edev) { - struct dw_eth_dev *priv = dev->priv; - struct eth_mac_regs *mac_p = priv->mac_regs_p; - struct eth_dma_regs *dma_p = priv->dma_regs_p; + struct dw_eth_dev *priv = edev->priv; u32 conf; - int link, speed; - miidev_wait_aneg(&priv->miidev); - miidev_print_status(&priv->miidev); - link = miidev_get_status(&priv->miidev); - - if (priv->fix_mac_speed) { - speed = link & MIIDEV_STATUS_IS_1000MBIT ? 1000 : - (link & MIIDEV_STATUS_IS_100MBIT ? 100 : 10); - priv->fix_mac_speed(speed); - } + if (priv->fix_mac_speed) + priv->fix_mac_speed(edev->phydev->speed); conf = readl(&mac_p->conf); - if (link & MIIDEV_STATUS_IS_FULL_DUPLEX) + if (edev->phydev->duplex) conf |= FULLDPLXMODE; else conf &= ~FULLDPLXMODE; - if (link & MIIDEV_STATUS_IS_1000MBIT) + if (edev->phydev->speed == SPEED_1000) conf &= ~MII_PORTSELECT; else conf |= MII_PORTSELECT; writel(conf, &mac_p->conf); +} + +static int dwc_ether_open(struct eth_device *dev) +{ + struct dw_eth_dev *priv = dev->priv; + struct eth_mac_regs *mac_p = priv->mac_regs_p; + struct eth_dma_regs *dma_p = priv->dma_regs_p; + int ret; + + ret = phy_device_connect(dev, &priv->miibus, priv->phy_addr, + 0, PHY_INTERFACE_MODE_NA); + if (ret) + return ret; descs_init(dev); @@ -373,7 +377,7 @@ static int dwc_ether_probe(struct device_d *dev) { struct dw_eth_dev *priv; struct eth_device *edev; - struct mii_device *miidev; + struct mii_bus *miibus; void __iomem *base; struct dwc_ether_platform_data *pdata = dev->platform_data; @@ -397,7 +401,7 @@ static int dwc_ether_probe(struct device_d *dev) priv->fix_mac_speed = pdata->fix_mac_speed; edev = &priv->netdev; - miidev = &priv->miidev; + miibus = &priv->miibus; edev->priv = priv; edev->init = dwc_ether_init; @@ -408,12 +412,12 @@ static int dwc_ether_probe(struct device_d *dev) edev->get_ethaddr = dwc_ether_get_ethaddr; edev->set_ethaddr = dwc_ether_set_ethaddr; - miidev->address = pdata->phy_addr; - miidev->read = dwc_ether_mii_read; - miidev->write = dwc_ether_mii_write; - miidev->edev = edev; + priv->phy_addr = pdata->phy_addr; + miibus->read = dwc_ether_mii_read; + miibus->write = dwc_ether_mii_write; + miibus->priv = priv; - mii_register(miidev); + mdiobus_register(miibus); eth_register(edev); return 0; } diff --git a/drivers/net/dm9k.c b/drivers/net/dm9k.c index 0222d98..ac18be2 100644 --- a/drivers/net/dm9k.c +++ b/drivers/net/dm9k.c @@ -26,12 +26,12 @@ #include #include #include -#include #include #include #include #include #include +#include #define DM9K_ID 0x90000A46 #define CHIPR_DM9000A 0x19 @@ -160,7 +160,7 @@ struct dm9k { void __iomem *iobase; void __iomem *iodata; - struct mii_device miidev; + struct mii_bus miibus; int buswidth; int srom; uint8_t pckt[2048]; @@ -353,12 +353,11 @@ static void dm9k_wd(int b_width, void __iomem *port, const void *src, int length /* ----------------- end of data move functions -------------------------- */ -static int dm9k_phy_read(struct mii_device *mdev, int addr, int reg) +static int dm9k_phy_read(struct mii_bus *bus, int addr, int reg) { unsigned val; - struct eth_device *edev = mdev->edev; - struct device_d *dev = edev->parent; - struct dm9k *priv = edev->priv; + struct dm9k *priv = bus->priv; + struct device_d *dev = &bus->dev; /* Fill the phyxcer register into REG_0C */ dm9k_iow(priv, DM9K_EPAR, DM9K_PHY | reg); @@ -374,11 +373,10 @@ static int dm9k_phy_read(struct mii_device *mdev, int addr, int reg) return val; } -static int dm9k_phy_write(struct mii_device *mdev, int addr, int reg, int val) +static int dm9k_phy_write(struct mii_bus *bus, int addr, int reg, u16 val) { - struct eth_device *edev = mdev->edev; - struct device_d *dev = edev->parent; - struct dm9k *priv = edev->priv; + struct dm9k *priv = bus->priv; + struct device_d *dev = &bus->dev; /* Fill the phyxcer register into REG_0C */ dm9k_iow(priv, DM9K_EPAR, DM9K_PHY | reg); @@ -397,7 +395,7 @@ static int dm9k_phy_write(struct mii_device *mdev, int addr, int reg, int val) static int dm9k_check_id(struct dm9k *priv) { - struct device_d *dev = priv->miidev.parent; + struct device_d *dev = priv->miibus.parent; u32 id; char c; @@ -461,7 +459,7 @@ static void dm9k_enable(struct dm9k *priv) static void dm9k_reset(struct dm9k *priv) { - struct device_d *dev = priv->miidev.parent; + struct device_d *dev = priv->miibus.parent; dev_dbg(dev, "%s\n", __func__); dm9k_iow(priv, DM9K_NCR, NCR_RST); @@ -472,9 +470,8 @@ static int dm9k_eth_open(struct eth_device *edev) { struct dm9k *priv = (struct dm9k *)edev->priv; - miidev_wait_aneg(&priv->miidev); - miidev_print_status(&priv->miidev); - return 0; + return phy_device_connect(edev, &priv->miibus, 0, NULL, + 0, PHY_INTERFACE_MODE_NA); } static void dm9k_write_length(struct dm9k *priv, unsigned length) @@ -485,7 +482,7 @@ static void dm9k_write_length(struct dm9k *priv, unsigned length) static int dm9k_wait_for_trans_end(struct dm9k *priv) { - struct device_d *dev = priv->miidev.parent; + struct device_d *dev = priv->miibus.parent; static const uint64_t toffs = 1 * SECOND; uint8_t status; uint64_t start = get_time_ns(); @@ -511,7 +508,7 @@ static int dm9k_wait_for_trans_end(struct dm9k *priv) static int dm9k_eth_send(struct eth_device *edev, void *packet, int length) { struct dm9k *priv = (struct dm9k *)edev->priv; - struct device_d *dev = priv->miidev.parent; + struct device_d *dev = priv->miibus.parent; dev_dbg(dev, "%s: %d bytes\n", __func__, length); @@ -537,7 +534,7 @@ static int dm9k_eth_send(struct eth_device *edev, void *packet, int length) static int dm9k_check_for_rx_packet(struct dm9k *priv) { uint8_t status; - struct device_d *dev = priv->miidev.parent; + struct device_d *dev = priv->miibus.parent; status = dm9k_ior(priv, DM9K_ISR); if (!(status & ISR_PR)) @@ -550,7 +547,7 @@ static int dm9k_check_for_rx_packet(struct dm9k *priv) static int dm9k_validate_entry(struct dm9k *priv) { - struct device_d *dev = priv->miidev.parent; + struct device_d *dev = priv->miibus.parent; uint8_t p_stat; /* @@ -696,9 +693,6 @@ static int dm9k_set_ethaddr(struct eth_device *edev, unsigned char *adr) static int dm9k_init_dev(struct eth_device *edev) { - struct dm9k *priv = (struct dm9k *)edev->priv; - - miidev_restart_aneg(&priv->miidev); return 0; } @@ -740,12 +734,10 @@ static int dm9k_probe(struct device_d *dev) edev->get_ethaddr = dm9k_get_ethaddr; edev->parent = dev; - priv->miidev.read = dm9k_phy_read; - priv->miidev.write = dm9k_phy_write; - priv->miidev.address = 0; - priv->miidev.flags = 0; - priv->miidev.edev = edev; - priv->miidev.parent = dev; + priv->miibus.read = dm9k_phy_read; + priv->miibus.write = dm9k_phy_write; + priv->miibus.priv = priv; + priv->miibus.parent = dev; /* RESET device */ dm9k_reset(priv); @@ -778,7 +770,7 @@ static int dm9k_probe(struct device_d *dev) dm9k_enable(priv); - mii_register(&priv->miidev); + mdiobus_register(&priv->miibus); eth_register(edev); return 0; diff --git a/drivers/net/ep93xx.c b/drivers/net/ep93xx.c index c28fb79..a14c0ea 100644 --- a/drivers/net/ep93xx.c +++ b/drivers/net/ep93xx.c @@ -34,17 +34,17 @@ #include #include #include -#include #include #include #include +#include #include "ep93xx.h" #define EP93XX_MAX_PKT_SIZE 1536 -static int ep93xx_phy_read(struct mii_device *mdev, int phy_addr, int phy_reg); -static int ep93xx_phy_write(struct mii_device *mdev, int phy_addr, int phy_reg, - int value); +static int ep93xx_phy_read(struct mii_bus *bus, int phy_addr, int phy_reg); +static int ep93xx_phy_write(struct mii_bus *bus, int phy_addr, int phy_reg, + u16 value); static inline struct ep93xx_eth_priv *ep93xx_get_priv(struct eth_device *edev) { @@ -199,9 +199,15 @@ static int ep93xx_eth_open(struct eth_device *edev) struct ep93xx_eth_priv *priv = ep93xx_get_priv(edev); struct mac_regs *regs = ep93xx_get_regs(edev); int i; + int ret; pr_debug("+ep93xx_eth_open\n"); + ret = phy_device_connect(edev, &priv->miibus, 0, NULL, + 0, PHY_INTERFACE_MODE_NA); + if (ret) + return ret; + ep93xx_eth_reset(edev); /* Reset the descriptor queues' current and end address values */ @@ -498,11 +504,10 @@ static int ep93xx_eth_probe(struct device_d *dev) edev->set_ethaddr = ep93xx_eth_set_ethaddr; edev->parent = dev; - priv->miidev.read = ep93xx_phy_read; - priv->miidev.write = ep93xx_phy_write; - priv->miidev.address = 0; - priv->miidev.flags = 0; - priv->miidev.parent = dev; + priv->miibus.read = ep93xx_phy_read; + priv->miibus.write = ep93xx_phy_write; + priv->miibus.parent = dev; + priv->miibus.priv = edev; priv->tx_dq.base = calloc(NUMTXDESC, sizeof(struct tx_descriptor)); @@ -532,7 +537,7 @@ static int ep93xx_eth_probe(struct device_d *dev) goto eth_probe_failed_3; } - mii_register(&priv->miidev); + mdiobus_register(&priv->miibus); eth_register(edev); ret = 0; @@ -575,9 +580,9 @@ eth_probe_done: /** * Read a 16-bit value from an MII register. */ -static int ep93xx_phy_read(struct mii_device *mdev, int phy_addr, int phy_reg) +static int ep93xx_phy_read(struct mii_bus *bus, int phy_addr, int phy_reg) { - struct mac_regs *regs = ep93xx_get_regs(mdev->edev); + struct mac_regs *regs = ep93xx_get_regs(bus->priv); int value = -1; uint32_t self_ctl; @@ -618,10 +623,10 @@ static int ep93xx_phy_read(struct mii_device *mdev, int phy_addr, int phy_reg) /** * Write a 16-bit value to an MII register. */ -static int ep93xx_phy_write(struct mii_device *mdev, int phy_addr, - int phy_reg, int value) +static int ep93xx_phy_write(struct mii_bus *bus, int phy_addr, + int phy_reg, u16 value) { - struct mac_regs *regs = ep93xx_get_regs(mdev->edev); + struct mac_regs *regs = ep93xx_get_regs(bus->priv); uint32_t self_ctl; pr_debug("+ep93xx_phy_write\n"); diff --git a/drivers/net/ep93xx.h b/drivers/net/ep93xx.h index 875715f..4d50f70 100644 --- a/drivers/net/ep93xx.h +++ b/drivers/net/ep93xx.h @@ -141,7 +141,7 @@ struct ep93xx_eth_priv { struct tx_descriptor_queue tx_dq; struct tx_status_queue tx_sq; - struct mii_device miidev; + struct mii_bus miibus; }; #endif diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c index 599a9b4..453185a 100644 --- a/drivers/net/fec_imx.c +++ b/drivers/net/fec_imx.c @@ -23,11 +23,11 @@ #include #include #include -#include #include #include #include #include +#include #include @@ -50,10 +50,9 @@ struct fec_frame { /* * MII-interface related functions */ -static int fec_miidev_read(struct mii_device *mdev, int phyAddr, int regAddr) +static int fec_miibus_read(struct mii_bus *bus, int phyAddr, int regAddr) { - struct eth_device *edev = mdev->edev; - struct fec_priv *fec = (struct fec_priv *)edev->priv; + struct fec_priv *fec = (struct fec_priv *)bus->priv; uint32_t reg; /* convenient holder for the PHY register */ uint32_t phy; /* convenient holder for the PHY */ @@ -93,11 +92,10 @@ static int fec_miidev_read(struct mii_device *mdev, int phyAddr, int regAddr) return readl(fec->regs + FEC_MII_DATA); } -static int fec_miidev_write(struct mii_device *mdev, int phyAddr, - int regAddr, int data) +static int fec_miibus_write(struct mii_bus *bus, int phyAddr, + int regAddr, u16 data) { - struct eth_device *edev = mdev->edev; - struct fec_priv *fec = (struct fec_priv *)edev->priv; + struct fec_priv *fec = (struct fec_priv *)bus->priv; uint32_t reg; /* convenient holder for the PHY register */ uint32_t phy; /* convenient holder for the PHY */ @@ -347,12 +345,20 @@ static int fec_init(struct eth_device *dev) /* size of each buffer */ writel(FEC_MAX_PKT_SIZE, fec->regs + FEC_EMRBR); - if (fec->xcv_type != SEVENWIRE) - miidev_restart_aneg(&fec->miidev); - return 0; } +static void fec_update_linkspeed(struct eth_device *edev) +{ + struct fec_priv *fec = (struct fec_priv *)edev->priv; + + if (edev->phydev->speed == SPEED_10) { + u32 rcntl = readl(fec->regs + FEC_R_CNTRL); + rcntl |= FEC_R_CNTRL_RMII_10T; + writel(rcntl, fec->regs + FEC_R_CNTRL); + } +} + /** * Start the FEC engine * @param[in] edev Our device to handle @@ -363,6 +369,17 @@ static int fec_open(struct eth_device *edev) int ret; u32 ecr; + if (fec->xcv_type != SEVENWIRE) { + ret = phy_device_connect(edev, &fec->miibus, fec->phy_addr, + fec_update_linkspeed, fec->phy_flags, + fec->interface); + if (ret) + return ret; + + if (fec->phy_init) + fec->phy_init(edev->phydev); + } + /* * Initialize RxBD/TxBD rings */ @@ -388,24 +405,6 @@ static int fec_open(struct eth_device *edev) */ fec_rx_task_enable(fec); - if (fec->xcv_type != SEVENWIRE) { - ret = miidev_wait_aneg(&fec->miidev); - if (ret) - return ret; - - ret = miidev_get_status(&fec->miidev); - if (ret < 0) - return ret; - - if (ret & MIIDEV_STATUS_IS_10MBIT) { - u32 rcntl = readl(fec->regs + FEC_R_CNTRL); - rcntl |= FEC_R_CNTRL_RMII_10T; - writel(rcntl, fec->regs + FEC_R_CNTRL); - } - - miidev_print_status(&fec->miidev); - } - return 0; } @@ -659,14 +658,30 @@ static int fec_probe(struct device_d *dev) fec->xcv_type = pdata->xcv_type; if (fec->xcv_type != SEVENWIRE) { - fec->miidev.read = fec_miidev_read; - fec->miidev.write = fec_miidev_write; - fec->miidev.address = pdata->phy_addr; - fec->miidev.flags = pdata->xcv_type == MII10 ? MIIDEV_FORCE_10 : 0; - fec->miidev.edev = edev; - fec->miidev.parent = dev; - - mii_register(&fec->miidev); + fec->phy_init = pdata->phy_init; + fec->miibus.read = fec_miibus_read; + fec->miibus.write = fec_miibus_write; + fec->phy_addr = pdata->phy_addr; + switch (pdata->xcv_type) { + case RMII: + fec->interface = PHY_INTERFACE_MODE_RMII; + break; + case RGMII: + fec->interface = PHY_INTERFACE_MODE_RGMII; + break; + case MII10: + fec->phy_flags = PHYLIB_FORCE_10; + case MII100: + fec->interface = PHY_INTERFACE_MODE_MII; + break; + case SEVENWIRE: + fec->interface = PHY_INTERFACE_MODE_NA; + break; + } + fec->miibus.priv = fec; + fec->miibus.parent = dev; + + mdiobus_register(&fec->miibus); } eth_register(edev); diff --git a/drivers/net/fec_imx.h b/drivers/net/fec_imx.h index b75b4d6..c8e758b 100644 --- a/drivers/net/fec_imx.h +++ b/drivers/net/fec_imx.h @@ -137,7 +137,11 @@ struct fec_priv { int rbd_index; /* next receive BD to read */ struct buffer_descriptor __iomem *tbd_base; /* TBD ring */ int tbd_index; /* next transmit BD to write */ - struct mii_device miidev; + int phy_addr; + phy_interface_t interface; + u32 phy_flags; + struct mii_bus miibus; + void (*phy_init)(struct phy_device *dev); }; /** diff --git a/drivers/net/fec_mpc5200.c b/drivers/net/fec_mpc5200.c index c3f2099..1f65014 100644 --- a/drivers/net/fec_mpc5200.c +++ b/drivers/net/fec_mpc5200.c @@ -11,12 +11,11 @@ #include #include #include -#include #include #include #include #include -#include +#include #include "fec_mpc5200.h" #define CONFIG_PHY_ADDR 1 /* FIXME */ @@ -31,10 +30,9 @@ typedef struct { /* * MII-interface related functions */ -static int fec5xxx_miidev_read(struct mii_device *mdev, int phyAddr, int regAddr) +static int fec5xxx_miibus_read(struct mii_bus *bus, int phyAddr, int regAddr) { - struct eth_device *edev = mdev->edev; - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)edev->priv; + mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)bus->priv; uint32_t reg; /* convenient holder for the PHY register */ uint32_t phy; /* convenient holder for the PHY */ @@ -70,11 +68,10 @@ static int fec5xxx_miidev_read(struct mii_device *mdev, int phyAddr, int regAddr return fec->eth->mii_data; } -static int fec5xxx_miidev_write(struct mii_device *mdev, int phyAddr, - int regAddr, int data) +static int fec5xxx_miibus_write(struct mii_bus *bus, int phyAddr, + int regAddr, u16 data) { - struct eth_device *edev = mdev->edev; - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)edev->priv; + mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)bus->priv; uint32_t reg; /* convenient holder for the PHY register */ uint32_t phy; /* convenient holder for the PHY */ @@ -381,9 +378,6 @@ static int mpc5xxx_fec_init(struct eth_device *dev) debug("mpc5xxx_fec_init... Done \n"); - if (fec->xcv_type != SEVENWIRE) - miidev_restart_aneg(&fec->miidev); - return 0; } @@ -413,8 +407,8 @@ static int mpc5xxx_fec_open(struct eth_device *edev) SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); if (fec->xcv_type != SEVENWIRE) { - miidev_wait_aneg(&fec->miidev); - miidev_print_status(&fec->miidev); + return phy_device_connect(edev, &fec->miibus, CONFIG_PHY_ADDR, + NULL, fec->phy_flags, fec->interface); } return 0; @@ -556,7 +550,7 @@ static int mpc5xxx_fec_send(struct eth_device *dev, void *eth_data, */ if (fec->xcv_type != SEVENWIRE) { uint16_t phyStatus; - phyStatus = fec5xxx_miidev_read(&fec->miidev, 0, 0x1); + phyStatus = fec5xxx_miibus_read(&fec->miibus, 0, 0x1); } /* @@ -683,14 +677,28 @@ int mpc5xxx_fec_probe(struct device_d *dev) loadtask(0, 2); if (fec->xcv_type != SEVENWIRE) { - fec->miidev.read = fec5xxx_miidev_read; - fec->miidev.write = fec5xxx_miidev_write; - fec->miidev.address = CONFIG_PHY_ADDR; - fec->miidev.flags = pdata->xcv_type == MII10 ? MIIDEV_FORCE_10 : 0; - fec->miidev.edev = edev; - fec->miidev.parent = dev; - - mii_register(&fec->miidev); + fec->miibus.read = fec5xxx_miibus_read; + fec->miibus.write = fec5xxx_miibus_write; + switch (pdata->xcv_type) { + case RMII: + fec->interface = PHY_INTERFACE_MODE_RMII; + break; + case RGMII: + fec->interface = PHY_INTERFACE_MODE_RGMII; + break; + case MII10: + fec->phy_flags = PHYLIB_FORCE_10; + case MII100: + fec->interface = PHY_INTERFACE_MODE_MII; + break; + case SEVENWIRE: + fec->interface = PHY_INTERFACE_MODE_NA; + break; + } + fec->miibus.priv = fec; + fec->miibus.parent = dev; + + mdiobus_register(&fec->miibus); } eth_register(edev); diff --git a/drivers/net/fec_mpc5200.h b/drivers/net/fec_mpc5200.h index f6da3e5..20ac607 100644 --- a/drivers/net/fec_mpc5200.h +++ b/drivers/net/fec_mpc5200.h @@ -260,7 +260,9 @@ typedef struct { uint16_t usedTbdIndex; /* next transmit BD to clean */ uint16_t cleanTbdNum; /* the number of available transmit BDs */ - struct mii_device miidev; + phy_interface_t interface; + u32 phy_flags; + struct mii_bus miibus; } mpc5xxx_fec_priv; /* Ethernet parameter area */ diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 19544de..20fd102 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -17,10 +17,10 @@ #include #include #include -#include #include #include #include +#include #include "gianfar.h" /* 2 seems to be the minimum number of TX descriptors to make it work. */ @@ -80,22 +80,16 @@ static void gfar_init_registers(void __iomem *regs) static void gfar_adjust_link(struct eth_device *edev) { struct gfar_private *priv = edev->priv; - struct device_d *mdev = priv->miidev.parent; void __iomem *regs = priv->regs; u32 ecntrl, maccfg2; uint32_t status; - status = miidev_get_status(&priv->miidev); + priv->link = edev->phydev->link; + priv->duplexity =edev->phydev->duplex; - priv->link = status & MIIDEV_STATUS_IS_UP; - if (status & MIIDEV_STATUS_IS_FULL_DUPLEX) - priv->duplexity = 1; - else - priv->duplexity = 0; - - if (status & MIIDEV_STATUS_IS_1000MBIT) + if (edev->phydev->speed == SPEED_1000) priv->speed = 1000; - else if (status & MIIDEV_STATUS_IS_100MBIT) + if (edev->phydev->speed == SPEED_100) priv->speed = 100; else priv->speed = 10; @@ -128,18 +122,18 @@ static void gfar_adjust_link(struct eth_device *edev) ecntrl |= GFAR_ECNTRL_R100; break; default: - dev_info(mdev, "Speed is unknown\n"); + dev_info(&edev->dev, "Speed is unknown\n"); break; } out_be32(regs + GFAR_ECNTRL_OFFSET, ecntrl); out_be32(regs + GFAR_MACCFG2_OFFSET, maccfg2); - dev_info(mdev, "Speed: %d, %s duplex\n", priv->speed, + dev_info(&edev->dev, "Speed: %d, %s duplex\n", priv->speed, (priv->duplexity) ? "full" : "half"); } else { - dev_info(mdev, "No link.\n"); + dev_info(&edev->dev, "No link.\n"); } } @@ -184,8 +178,6 @@ static int gfar_init(struct eth_device *edev) gfar_init_registers(regs); - miidev_restart_aneg(&priv->miidev); - return 0; } @@ -194,6 +186,12 @@ static int gfar_open(struct eth_device *edev) int ix; struct gfar_private *priv = edev->priv; void __iomem *regs = priv->regs; + int ret; + + ret = phy_device_connect(edev, &priv->miibus, priv->phyaddr, + gfar_adjust_link, 0, PHY_INTERFACE_MODE_NA); + if (ret) + return ret; /* Point to the buffer descriptors */ out_be32(regs + GFAR_TBASE0_OFFSET, (unsigned int)priv->txbd); @@ -215,9 +213,6 @@ static int gfar_open(struct eth_device *edev) } priv->txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP; - miidev_wait_aneg(&priv->miidev); - gfar_adjust_link(edev); - /* Enable Transmit and Receive */ setbits_be32(regs + GFAR_MACCFG1_OFFSET, GFAR_MACCFG1_RX_EN | GFAR_MACCFG1_TX_EN); @@ -437,11 +432,10 @@ static int gfar_recv(struct eth_device *edev) } /* Read a MII PHY register. */ -static int gfar_miiphy_read(struct mii_device *mdev, int addr, int reg) +static int gfar_miiphy_read(struct mii_bus *bus, int addr, int reg) { - struct eth_device *edev = mdev->edev; - struct device_d *dev = edev->parent; - struct gfar_private *priv = edev->priv; + struct device_d *dev = bus->parent; + struct gfar_private *priv = bus->priv; int ret; ret = gfar_local_mdio_read(priv->phyregs, addr, reg); @@ -452,12 +446,11 @@ static int gfar_miiphy_read(struct mii_device *mdev, int addr, int reg) } /* Write a MII PHY register. */ -static int gfar_miiphy_write(struct mii_device *mdev, int addr, int reg, - int value) +static int gfar_miiphy_write(struct mii_bus *bus, int addr, int reg, + u16 value) { - struct eth_device *edev = mdev->edev; - struct device_d *dev = edev->parent; - struct gfar_private *priv = edev->priv; + struct device_d *dev = bus->parent; + struct gfar_private *priv = bus->priv; unsigned short val = value; int ret; @@ -520,16 +513,14 @@ static int gfar_probe(struct device_d *dev) udelay(2); clrbits_be32(priv->regs + GFAR_MACCFG1_OFFSET, GFAR_MACCFG1_SOFT_RESET); - priv->miidev.read = gfar_miiphy_read; - priv->miidev.write = gfar_miiphy_write; - priv->miidev.address = priv->phyaddr; - priv->miidev.flags = 0; - priv->miidev.edev = edev; - priv->miidev.parent = dev; + priv->miibus.read = gfar_miiphy_read; + priv->miibus.write = gfar_miiphy_write; + priv->miibus.priv = priv; + priv->miibus.parent = dev; gfar_init_phy(edev); - mii_register(&priv->miidev); + mdiobus_register(&priv->miibus); return eth_register(edev); } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index a4ad99e..b52cc5a 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -269,7 +269,7 @@ struct gfar_private { void __iomem *phyregs; void __iomem *phyregs_sgmii; struct phy_info *phyinfo; - struct mii_device miidev; + struct mii_bus miibus; volatile struct txbd8 *txbd; volatile struct rxbd8 *rxbd; uint txidx; diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index 71391cc..926c433 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -26,13 +26,13 @@ #include #include -#include #include #include #include #include #include #include +#include #define MAX_RECV_FRAMES 32 #define MAX_BUF_SIZE 2048 @@ -372,7 +372,7 @@ struct ks_net { struct eth_device edev; - struct mii_device miidev; + struct mii_bus miibus; void __iomem *hw_addr; void __iomem *hw_addr_cmd; struct platform_device *pdev; @@ -536,10 +536,9 @@ static int ks_phy_reg(int reg) * caller. The mii-tool that the driver was tested with takes any -ve error * as real PHY capabilities, thus displaying incorrect data to the user. */ -static int ks_phy_read(struct mii_device *mdev, int addr, int reg) +static int ks_phy_read(struct mii_bus *bus, int addr, int reg) { - struct eth_device *edev = mdev->edev; - struct ks_net *priv = (struct ks_net *)edev->priv; + struct ks_net *priv = (struct ks_net *)bus->priv; int ksreg; int result; @@ -552,10 +551,9 @@ static int ks_phy_read(struct mii_device *mdev, int addr, int reg) return result; } -static int ks_phy_write(struct mii_device *mdev, int addr, int reg, int val) +static int ks_phy_write(struct mii_bus *bus, int addr, int reg, u16 val) { - struct eth_device *edev = mdev->edev; - struct ks_net *priv = (struct ks_net *)edev->priv; + struct ks_net *priv = (struct ks_net *)bus->priv; int ksreg; ksreg = ks_phy_reg(reg); @@ -783,11 +781,14 @@ static int ks8851_eth_open(struct eth_device *edev) { struct ks_net *priv = (struct ks_net *)edev->priv; struct device_d *dev = &edev->dev; + int ret; ks_enable_qmu(priv); - miidev_wait_aneg(&priv->miidev); - miidev_print_status(&priv->miidev); + ret = phy_device_connect(edev, &priv->miibus, 1, NULL, + 0, PHY_INTERFACE_MODE_NA); + if (ret) + return ret; dev_dbg(dev, "eth_open\n"); @@ -796,9 +797,6 @@ static int ks8851_eth_open(struct eth_device *edev) static int ks8851_init_dev(struct eth_device *edev) { - struct ks_net *priv = (struct ks_net *)edev->priv; - - miidev_restart_aneg(&priv->miidev); return 0; } @@ -842,12 +840,10 @@ static int ks8851_probe(struct device_d *dev) edev->parent = dev; /* setup mii state */ - ks->miidev.read = ks_phy_read; - ks->miidev.write = ks_phy_write; - ks->miidev.address = 1; - ks->miidev.flags = 0; - ks->miidev.edev = edev; - ks->miidev.parent = dev; + ks->miibus.read = ks_phy_read; + ks->miibus.write = ks_phy_write; + ks->miibus.priv = ks; + ks->miibus.parent = dev; /* simple check for a valid chip being connected to the bus */ @@ -868,7 +864,7 @@ static int ks8851_probe(struct device_d *dev) ks_soft_reset(ks, GRR_GSR); ks_setup(ks); - mii_register(&ks->miidev); + mdiobus_register(&ks->miibus); eth_register(edev); dev_dbg(dev, "%s MARL 0x%04x MARM 0x%04x MARH 0x%04x\n", __func__, ks_rdreg16(ks, KS_MARL), ks_rdreg16(ks, KS_MARM), diff --git a/drivers/net/macb.c b/drivers/net/macb.c index feffea5..feb8ac6 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -44,13 +44,13 @@ #include #include #include -#include #include #include #include #include #include #include +#include #include "macb.h" @@ -97,12 +97,16 @@ struct macb_device { struct macb_dma_desc *rx_ring; struct macb_dma_desc *tx_ring; + int phy_addr; + const struct device *dev; struct eth_device netdev; - struct mii_device miidev; + phy_interface_t interface; + + struct mii_bus miibus; - unsigned int flags; + unsigned int phy_flags; }; static int macb_send(struct eth_device *edev, void *packet, @@ -214,26 +218,32 @@ static int macb_recv(struct eth_device *edev) return 0; } -static int macb_open(struct eth_device *edev) +static void macb_adjust_link(struct eth_device *edev) { struct macb_device *macb = edev->priv; - int duplex = 1, speed = 1; - u32 ncfgr; + u32 reg; - debug("%s\n", __func__); + reg = readl(macb->regs + MACB_NCFGR); + reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD)); - miidev_wait_aneg(&macb->miidev); - miidev_print_status(&macb->miidev); + if (edev->phydev->duplex) + reg |= MACB_BIT(FD); + if (edev->phydev->speed == SPEED_100) + reg |= MACB_BIT(SPD); - ncfgr = readl(macb->regs + MACB_NCFGR); - ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD)); - if (speed) - ncfgr |= MACB_BIT(SPD); - if (duplex) - ncfgr |= MACB_BIT(FD); - writel(ncfgr, macb->regs + MACB_NCFGR); + writel(reg, macb->regs + MACB_NCFGR); +} - return 0; +static int macb_open(struct eth_device *edev) +{ + struct macb_device *macb = edev->priv; + + debug("%s\n", __func__); + + /* Obtain the PHY's address/id */ + return phy_device_connect(edev, &macb->miibus, macb->phy_addr, + macb_adjust_link, macb->phy_flags, + macb->interface); } static int macb_init(struct eth_device *edev) @@ -267,7 +277,7 @@ static int macb_init(struct eth_device *edev) writel((ulong)macb->rx_ring, macb->regs + MACB_RBQP); writel((ulong)macb->tx_ring, macb->regs + MACB_TBQP); - if (macb->flags & AT91SAM_ETHER_RMII) + if (macb->interface == PHY_INTERFACE_MODE_RMII) val |= MACB_BIT(RMII); else val &= ~MACB_BIT(RMII); @@ -301,10 +311,9 @@ static void macb_halt(struct eth_device *edev) writel(MACB_BIT(CLRSTAT), macb->regs + MACB_NCR); } -static int macb_phy_read(struct mii_device *mdev, int addr, int reg) +static int macb_phy_read(struct mii_bus *bus, int addr, int reg) { - struct eth_device *edev = mdev->edev; - struct macb_device *macb = edev->priv; + struct macb_device *macb = bus->priv; unsigned long netctl; unsigned long netstat; @@ -344,10 +353,9 @@ static int macb_phy_read(struct mii_device *mdev, int addr, int reg) return value; } -static int macb_phy_write(struct mii_device *mdev, int addr, int reg, int value) +static int macb_phy_write(struct mii_bus *bus, int addr, int reg, u16 value) { - struct eth_device *edev = mdev->edev; - struct macb_device *macb = edev->priv; + struct macb_device *macb = bus->priv; unsigned long netctl; unsigned long netstat; unsigned long frame; @@ -428,14 +436,19 @@ static int macb_probe(struct device_d *dev) edev->set_ethaddr = macb_set_ethaddr; edev->parent = dev; - macb->miidev.read = macb_phy_read; - macb->miidev.write = macb_phy_write; - macb->miidev.address = pdata->phy_addr; - macb->miidev.flags = pdata->flags & AT91SAM_ETHER_FORCE_LINK ? - MIIDEV_FORCE_LINK : 0; - macb->miidev.edev = edev; - macb->miidev.parent = dev; - macb->flags = pdata->flags; + macb->miibus.read = macb_phy_read; + macb->miibus.write = macb_phy_write; + macb->phy_addr = pdata->phy_addr; + macb->miibus.priv = macb; + macb->miibus.parent = dev; + + if (pdata->flags & AT91SAM_ETHER_RMII) { + macb->interface = PHY_INTERFACE_MODE_RGMII; + } else { + macb->interface = PHY_INTERFACE_MODE_MII; + macb->phy_flags = pdata->flags & AT91SAM_ETHER_FORCE_LINK ? + PHYLIB_FORCE_LINK : 0; + } macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE); macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE * sizeof(struct macb_dma_desc)); @@ -470,7 +483,7 @@ static int macb_probe(struct device_d *dev) writel(ncfgr, macb->regs + MACB_NCFGR); - mii_register(&macb->miidev); + mdiobus_register(&macb->miibus); eth_register(edev); return 0; diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c deleted file mode 100644 index e0f9d67..0000000 --- a/drivers/net/miidev.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * miidev.c - generic phy abstraction - * - * Copyright (c) 2007 Sascha Hauer , Pengutronix - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -static LIST_HEAD(miidev_list); - -int miidev_restart_aneg(struct mii_device *mdev) -{ - int status, timeout; - uint64_t start; - - status = mii_write(mdev, mdev->address, MII_BMCR, BMCR_RESET); - if (status) - return status; - - start = get_time_ns(); - do { - status = mii_read(mdev, mdev->address, MII_BMCR); - if (status < 0) - return status; - - if (is_timeout(start, SECOND)) - return -ETIMEDOUT; - - } while (status & BMCR_RESET); - - if (mdev->flags & MIIDEV_FORCE_LINK) - return 0; - - if (mdev->flags & MIIDEV_FORCE_10) { - printf("Forcing 10 Mbps ethernet link... "); - - status = mii_read(mdev, mdev->address, MII_BMSR); - if (status < 0) - return status; - - status = mii_write(mdev, mdev->address, MII_BMCR, BMCR_FULLDPLX | BMCR_CTST); - if (status) - return status; - - timeout = 20; - do { /* wait for link status to go down */ - udelay(10000); - if ((timeout--) == 0) { - debug("hmmm, should not have waited..."); - break; - } - status = mii_read(mdev, mdev->address, MII_BMSR); - if (status < 0) - return status; - } while (status & BMSR_LSTATUS); - - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - status = mii_read(mdev, mdev->address, MII_ADVERTISE); - if (status < 0) - return status; - - status |= ADVERTISE_ALL; - - status = mii_write(mdev, mdev->address, MII_ADVERTISE, status); - if (status) - return status; - - status = mii_write(mdev, mdev->address, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART); - if (status) - return status; - } - - return 0; -} - -int miidev_wait_aneg(struct mii_device *mdev) -{ - int status; - uint64_t start = get_time_ns(); - - if (mdev->flags & MIIDEV_FORCE_LINK) - return 0; - - do { - status = mii_read(mdev, mdev->address, MII_BMSR); - if (status < 0) - return status; - - if (is_timeout(start, 5 * SECOND)) { - printf("%s: Autonegotiation timeout\n", mdev->cdev.name); - return -ETIMEDOUT; - } - - } while (!(status & BMSR_ANEGCOMPLETE)); - - return 0; -} - -int miidev_get_status(struct mii_device *mdev) -{ - int ret, status, adv, lpa; - - ret = mii_read(mdev, mdev->address, MII_BMSR); - if (ret < 0) - goto err_out; - - status = ret & BMSR_LSTATUS ? MIIDEV_STATUS_IS_UP : 0; - - if (ret & BMSR_ESTATEN) { - ret = mii_read(mdev, mdev->address, MII_ESTATUS); - if (ret < 0) - goto err_out; - if (ret & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF)) - mdev->capabilities = MIIDEV_CAPABLE_1000M; - } - - ret = mii_read(mdev, mdev->address, MII_BMCR); - if (ret < 0) - goto err_out; - - if (ret & BMCR_ANENABLE) { - if (mdev->capabilities & MIIDEV_CAPABLE_1000M) { - lpa = mii_read(mdev, mdev->address, MII_STAT1000); - if (lpa < 0) - goto err_out; - adv = mii_read(mdev, mdev->address, MII_CTRL1000); - if (adv < 0) - goto err_out; - lpa &= adv << 2; - if (lpa & (LPA_1000FULL | LPA_1000HALF)) { - if (lpa & LPA_1000FULL) - status |= MIIDEV_STATUS_IS_FULL_DUPLEX; - status |= MIIDEV_STATUS_IS_1000MBIT; - return status; - } - } - lpa = mii_read(mdev, mdev->address, MII_LPA); - if (lpa < 0) - goto err_out; - adv = mii_read(mdev, mdev->address, MII_ADVERTISE); - if (adv < 0) - goto err_out; - lpa &= adv; - status |= lpa & LPA_DUPLEX ? MIIDEV_STATUS_IS_FULL_DUPLEX : 0; - status |= lpa & LPA_100 ? MIIDEV_STATUS_IS_100MBIT : - MIIDEV_STATUS_IS_10MBIT; - } else { - status |= ret & BMCR_FULLDPLX ? MIIDEV_STATUS_IS_FULL_DUPLEX : 0; - status |= ret & BMCR_SPEED100 ? MIIDEV_STATUS_IS_100MBIT : - MIIDEV_STATUS_IS_10MBIT; - } - - return status; -err_out: - printf("%s: failed to read (%d)\n", mdev->cdev.name, ret); - return ret; -} - -int miidev_print_status(struct mii_device *mdev) -{ - char *duplex; - int speed, status; - - if (mdev->flags & MIIDEV_FORCE_LINK) { - printf("Forcing link present...\n"); - return 0; - } - - status = miidev_get_status(mdev); - if (status < 0) - return status; - - duplex = status & MIIDEV_STATUS_IS_FULL_DUPLEX ? "Full" : "Half"; - speed = status & MIIDEV_STATUS_IS_1000MBIT ? 1000 : - (status & MIIDEV_STATUS_IS_100MBIT ? 100 : 10); - - printf("%s: Link is %s", mdev->cdev.name, - status & MIIDEV_STATUS_IS_UP ? "up" : "down"); - printf(" - %d/%s\n", speed, duplex); - - return 0; -} - -static ssize_t miidev_read(struct cdev *cdev, void *_buf, size_t count, loff_t offset, ulong flags) -{ - int i = count; - uint16_t *buf = _buf; - struct mii_device *mdev = cdev->priv; - - while (i > 0) { - *buf = mii_read(mdev, mdev->address, offset / 2); - buf++; - i -= 2; - offset += 2; - } - - return count; -} - -static ssize_t miidev_write(struct cdev *cdev, const void *_buf, size_t count, loff_t offset, ulong flags) -{ - int i = count; - const uint16_t *buf = _buf; - struct mii_device *mdev = cdev->priv; - - while (i > 0) { - mii_write(mdev, mdev->address, offset / 2, *buf); - buf++; - i -= 2; - offset += 2; - } - - return count; -} - -static struct file_operations miidev_ops = { - .read = miidev_read, - .write = miidev_write, - .lseek = dev_lseek_default, -}; - -static int miidev_probe(struct device_d *dev) -{ - struct mii_device *mdev = dev->priv; - - mdev->capabilities = 0; - mdev->cdev.name = asprintf("phy%d", dev->id); - mdev->cdev.size = 64; - mdev->cdev.ops = &miidev_ops; - mdev->cdev.priv = mdev; - mdev->cdev.dev = dev; - devfs_create(&mdev->cdev); - list_add_tail(&mdev->list, &miidev_list); - return 0; -} - -static void miidev_remove(struct device_d *dev) -{ - struct mii_device *mdev = dev->priv; - - list_del(&mdev->list); - - free(mdev->cdev.name); - devfs_remove(&mdev->cdev); -} - -struct mii_device *mii_open(const char *name) -{ - struct mii_device *mdev; - - list_for_each_entry(mdev, &miidev_list, list) { - if (!strcmp(name, mdev->cdev.name)) - return mdev; - } - return NULL; -} - -void mii_close(struct mii_device *mdev) -{ -} - -static struct driver_d miidev_drv = { - .name = "miidev", - .probe = miidev_probe, - .remove = miidev_remove, -}; - -int mii_register(struct mii_device *mdev) -{ - mdev->dev.priv = mdev; - mdev->dev.id = DEVICE_ID_DYNAMIC; - strcpy(mdev->dev.name, "miidev"); - if (mdev->parent) - dev_add_child(mdev->parent, &mdev->dev); - - return register_device(&mdev->dev); -} - -void mii_unregister(struct mii_device *mdev) -{ - unregister_device(&mdev->dev); -} - -static int miidev_init(void) -{ - register_driver(&miidev_drv); - return 0; -} - -device_initcall(miidev_init); - diff --git a/drivers/net/netx_eth.c b/drivers/net/netx_eth.c index 2d92a2e..a476425 100644 --- a/drivers/net/netx_eth.c +++ b/drivers/net/netx_eth.c @@ -2,13 +2,13 @@ #include #include #include -#include #include #include #include #include #include #include +#include #define ETH_MAC_LOCAL_CONFIG 0x1560 #define ETH_MAC_4321 0x1564 @@ -47,7 +47,7 @@ #define CON_FIFO_PORT_LO(xcno) (6 + ((xcno) << 3)) /* Index of the FIFO where sent Data packages are confirmed */ struct netx_eth_priv { - struct mii_device miidev; + struct mii_bus miibus; int xcno; }; @@ -118,7 +118,7 @@ static int netx_eth_rx (struct eth_device *edev) return 0; } -static int netx_miidev_read(struct mii_device *mdev, int phy_addr, int reg) +static int netx_miibus_read(struct mii_bus *bus, int phy_addr, int reg) { int value; @@ -135,8 +135,8 @@ static int netx_miidev_read(struct mii_device *mdev, int phy_addr, int reg) return value; } -static int netx_miidev_write(struct mii_device *mdev, int phy_addr, - int reg, int val) +static int netx_miibus_write(struct mii_bus *bus, int phy_addr, + int reg, u16 val) { debug("%s: addr: 0x%02x reg: 0x%02x val: 0x%04x\n",__func__, phy_addr, reg, val); @@ -189,13 +189,15 @@ static int netx_eth_init_dev(struct eth_device *edev) for (i = 2; i <= 18; i++) PFIFO_REG( PFIFO_BASE(EMPTY_PTR_FIFO(xcno)) ) = FIFO_PTR_FRAMENO(i) | FIFO_PTR_SEGMENT(xcno); - miidev_restart_aneg(&priv->miidev); return 0; } static int netx_eth_open(struct eth_device *edev) { - return 0; + struct netx_eth_priv *priv = (struct netx_eth_priv *)edev->priv; + + return phy_device_connect(edev, &priv->miibus, 0, NULL, + 0, PHY_INTERFACE_MODE_NA); } static void netx_eth_halt (struct eth_device *edev) @@ -259,14 +261,12 @@ static int netx_eth_probe(struct device_d *dev) edev->set_ethaddr = netx_eth_set_ethaddr; edev->parent = dev; - priv->miidev.read = netx_miidev_read; - priv->miidev.write = netx_miidev_write; - priv->miidev.address = 0; - priv->miidev.flags = 0; - priv->miidev.parent = dev; + priv->miibus.read = netx_miibus_read; + priv->miibus.write = netx_miibus_write; + priv->miibus.parent = dev; netx_eth_init_phy(); - mii_register(&priv->miidev); + mdiobus_register(&priv->miibus); eth_register(edev); return 0; diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig new file mode 100644 index 0000000..b66261a --- /dev/null +++ b/drivers/net/phy/Kconfig @@ -0,0 +1,17 @@ +# +# PHY Layer Configuration +# + +menu "phylib " + +if PHYLIB + +comment "MII PHY device drivers" + +config GENERIC_PHY + bool "Drivers for the Generic PHYs" + default y + +endif + +endmenu diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile new file mode 100644 index 0000000..82e90d4 --- /dev/null +++ b/drivers/net/phy/Makefile @@ -0,0 +1,2 @@ +obj-y += phy.o mdio_bus.o +obj-$(CONFIG_GENERIC_PHY) += generic.o diff --git a/include/fec.h b/drivers/net/phy/generic.c similarity index 53% copy from include/fec.h copy to drivers/net/phy/generic.c index f56b023..3f5f127 100644 --- a/include/fec.h +++ b/drivers/net/phy/generic.c @@ -1,6 +1,5 @@ /* - * (C) Copyright 2007 Pengutronix, Sascha Hauer - * (C) Copyright 2007 Pengutronix, Juergen Beisert + * Copyright (c) 2009 Jean-Christophe PLAGNIOL-VILLARD * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -16,34 +15,22 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA + * */ -/** - * @file - * @brief Shared structures and constants between i.MX27's and MPC52xx's FEC - */ -#ifndef __INCLUDE_NETWORK_FEC_H -#define __INCLUDE_NETWORK_FEC_H - -/* - * Supported phy types on this platform - */ -typedef enum { - SEVENWIRE, - MII10, - MII100, - RMII, - RGMII, -} xceiver_type; +#include +#include +#include -/* - * Define the phy connected externally for FEC drivers - * (like MPC52xx and i.MX27) - */ -struct fec_platform_data { - xceiver_type xcv_type; - int phy_addr; +static struct phy_driver generic_phy = { + .drv.name = "Generic PHY", + .phy_id = PHY_ANY_UID, + .phy_id_mask = PHY_ANY_UID, + .features = 0, }; -#endif /* __INCLUDE_NETWORK_FEC_H */ - +static int generic_phy_register(void) +{ + return phy_driver_register(&generic_phy); +} +device_initcall(generic_phy_register); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c new file mode 100644 index 0000000..93d6fe1 --- /dev/null +++ b/drivers/net/phy/mdio_bus.c @@ -0,0 +1,250 @@ +/* + * drivers/net/phy/mdio_bus.c + * + * MDIO Bus interface + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus + * @bus: target mii_bus + * + * Description: Called by a bus driver to bring up all the PHYs + * on a given bus, and attach them to the bus. + * + * Returns 0 on success or < 0 on error. + */ +int mdiobus_register(struct mii_bus *bus) +{ + int i, err; + + if (NULL == bus || + NULL == bus->read || + NULL == bus->write) + return -EINVAL; + + bus->dev.priv = bus; + bus->dev.id = DEVICE_ID_DYNAMIC; + strcpy(bus->dev.name, "miibus"); + bus->dev.parent = bus->parent; + if (bus->parent) + dev_add_child(bus->parent, &bus->dev); + + err = register_device(&bus->dev); + if (err) { + pr_err("mii_bus %s failed to register\n", bus->dev.name); + return -EINVAL; + } + + if (bus->reset) + bus->reset(bus); + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if ((bus->phy_mask & (1 << i)) == 0) { + struct phy_device *phydev; + + phydev = mdiobus_scan(bus, i); + if (IS_ERR(phydev)) { + err = PTR_ERR(phydev); + goto error; + } + } + } + + pr_info("%s: probed\n", dev_name(&bus->dev)); + return 0; + +error: + while (--i >= 0) { + if (bus->phy_map[i]) { + kfree(bus->phy_map[i]); + bus->phy_map[i] = NULL; + } + } + return err; +} +EXPORT_SYMBOL(mdiobus_register); + +void mdiobus_unregister(struct mii_bus *bus) +{ + int i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if (bus->phy_map[i]) + unregister_device(&bus->phy_map[i]->dev); + bus->phy_map[i] = NULL; + } +} +EXPORT_SYMBOL(mdiobus_unregister); + +struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) +{ + struct phy_device *phydev; + + phydev = get_phy_device(bus, addr); + if (IS_ERR(phydev) || phydev == NULL) + return phydev; + + bus->phy_map[addr] = phydev; + + return phydev; +} +EXPORT_SYMBOL(mdiobus_scan); + +/** + * mdio_bus_match - determine if given PHY driver supports the given PHY device + * @dev: target PHY device + * @drv: given PHY driver + * + * Description: Given a PHY device, and a PHY driver, return 1 if + * the driver supports the device. Otherwise, return 0. + */ +static int mdio_bus_match(struct device_d *dev, struct driver_d *drv) +{ + struct phy_device *phydev = to_phy_device(dev); + struct phy_driver *phydrv = to_phy_driver(drv); + + return ((phydrv->phy_id & phydrv->phy_id_mask) == + (phydev->phy_id & phydrv->phy_id_mask)); +} + +static ssize_t phydev_read(struct cdev *cdev, void *_buf, size_t count, loff_t offset, ulong flags) +{ + int i = count; + uint16_t *buf = _buf; + struct phy_device *phydev = cdev->priv; + + while (i > 0) { + *buf = phy_read(phydev, offset / 2); + buf++; + i -= 2; + offset += 2; + } + + return count; +} + +static ssize_t phydev_write(struct cdev *cdev, const void *_buf, size_t count, loff_t offset, ulong flags) +{ + int i = count; + const uint16_t *buf = _buf; + struct phy_device *phydev = cdev->priv; + + while (i > 0) { + phy_write(phydev, offset / 2, *buf); + buf++; + i -= 2; + offset += 2; + } + + return count; +} + +static struct file_operations phydev_ops = { + .read = phydev_read, + .write = phydev_write, + .lseek = dev_lseek_default, +}; + +static int mdio_bus_probe(struct device_d *_dev) +{ + struct phy_device *dev = to_phy_device(_dev); + struct phy_driver *drv = to_phy_driver(_dev->driver); + + char str[16]; + + dev->attached_dev->phydev = dev; + dev->dev.parent = &dev->attached_dev->dev; + dev_add_child(dev->dev.parent, _dev); + + if (drv->probe) { + int ret; + + ret = drv->probe(dev); + if (ret) { + dev->attached_dev->phydev = NULL; + dev->attached_dev = NULL; + return ret; + } + } + + if (dev->dev_flags) { + if (dev->dev_flags & PHYLIB_FORCE_10) { + dev->speed = SPEED_10; + dev->duplex = DUPLEX_FULL; + dev->autoneg = !AUTONEG_ENABLE; + } + } + + /* Start out supporting everything. Eventually, + * a controller will attach, and may modify one + * or both of these values */ + dev->supported = drv->features; + dev->advertising = drv->features; + + drv->config_init(dev); + + /* Sanitize settings based on PHY capabilities */ + if ((dev->supported & SUPPORTED_Autoneg) == 0) + dev->autoneg = AUTONEG_DISABLE; + + sprintf(str, "%d", dev->addr); + dev_add_param_fixed(&dev->dev, "phy_addr", str); + + dev->cdev.name = asprintf("phy%d", _dev->id); + dev->cdev.size = 64; + dev->cdev.ops = &phydev_ops; + dev->cdev.priv = dev; + dev->cdev.dev = _dev; + devfs_create(&dev->cdev); + + return 0; +} + +static void mdio_bus_remove(struct device_d *_dev) +{ + struct phy_device *dev = to_phy_device(_dev); + struct phy_driver *drv = to_phy_driver(_dev->driver); + + if (drv->remove) + drv->remove(dev); + + free(dev->cdev.name); + devfs_remove(&dev->cdev); +} + +struct bus_type mdio_bus_type = { + .name = "mdio_bus", + .match = mdio_bus_match, + .probe = mdio_bus_probe, + .remove = mdio_bus_remove, +}; +EXPORT_SYMBOL(mdio_bus_type); + +#if 0 +static int mdio_bus_init(void) +{ + return bus_register(&mdio_bus_type); +} +pure_initcall(mdio_bus_init); +#endif diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c new file mode 100644 index 0000000..2ea190a --- /dev/null +++ b/drivers/net/phy/phy.c @@ -0,0 +1,568 @@ +/* + * drivers/net/phy/phy.c + * + * Framework for finding and configuring PHYs. + * Also contains generic PHY driver + * + * Copyright (c) 2009-2012 Jean-Christophe PLAGNIOL-VILLARD + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define PHY_AN_TIMEOUT 10 + +static int genphy_config_init(struct phy_device *phydev); + +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id) +{ + struct phy_device *dev; + + /* We allocate the device, and initialize the + * default values */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + + if (NULL == dev) + return (struct phy_device*) PTR_ERR((void*)-ENOMEM); + + dev->speed = 0; + dev->duplex = -1; + dev->pause = dev->asym_pause = 0; + dev->link = 1; + dev->autoneg = AUTONEG_ENABLE; + + dev->addr = addr; + dev->phy_id = phy_id; + + dev->bus = bus; + dev->dev.parent = bus->parent; + dev->dev.bus = &mdio_bus_type; + + strcpy(dev->dev.name, "phy"); + dev->dev.id = DEVICE_ID_DYNAMIC; + + return dev; +} +/** + * get_phy_id - reads the specified addr for its ID. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, stores it in @phy_id and returns zero on success. + */ +int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) +{ + int phy_reg; + + /* Grab the bits from PHYIR1, and put them + * in the upper half */ + phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); + + io (phy_reg < 0) + return -EIO; + + *phy_id = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); + + if (phy_reg < 0) + return -EIO; + + *phy_id |= (phy_reg & 0xffff); + + return 0; +} + +/** + * get_phy_device - reads the specified PHY device and returns its @phy_device struct + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, then allocates and returns the phy_device to represent it. + */ +struct phy_device *get_phy_device(struct mii_bus *bus, int addr) +{ + struct phy_device *dev = NULL; + u32 phy_id = 0; + int r; + + r = get_phy_id(bus, addr, &phy_id); + if (r) + return ERR_PTR(r); + + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) == 0x1fffffff) + return NULL; + + dev = phy_device_create(bus, addr, phy_id); + + return dev; +} + +/* Automatically gets and returns the PHY device */ +int phy_device_connect(struct eth_device *edev, struct mii_bus *bus, int addr, + void (*adjust_link) (struct eth_device *edev), + u32 flags, phy_interface_t interface) +{ + struct phy_driver* drv; + struct phy_device* dev = NULL; + unsigned int i; + int ret = -EINVAL; + + if (!edev->phydev) { + if (addr >= 0) { + dev = bus->phy_map[addr]; + if (!dev) { + ret = -EIO; + goto fail; + } + + dev->attached_dev = edev; + dev->interface = interface; + dev->dev_flags = flags; + + ret = register_device(&dev->dev); + if (ret) + goto fail; + } else { + for (i = 0; i < PHY_MAX_ADDR && !edev->phydev; i++) { + dev = bus->phy_map[i]; + if (!dev || dev->attached_dev) + continue; + + dev->attached_dev = edev; + dev->interface = interface; + dev->dev_flags = flags; + + ret = register_device(&dev->dev); + if (ret) + goto fail; + + break; + } + } + + if (!edev->phydev) { + ret = -EIO; + goto fail; + } + } + + dev = edev->phydev; + drv = to_phy_driver(dev->dev.driver); + + drv->config_aneg(dev); + + ret = drv->read_status(dev); + if (ret < 0) + return ret; + + if (dev->link) + printf("%dMbps %s duplex link detected\n", dev->speed, + dev->duplex ? "full" : "half"); + + if (adjust_link) + adjust_link(edev); + + return 0; + +fail: + if (dev) + dev->attached_dev = NULL; + puts("Unable to find a PHY (unknown ID?)\n"); + return ret; +} + +/* Generic PHY support and helper functions */ + +/** + * genphy_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. + */ +int genphy_config_advert(struct phy_device *phydev) +{ + u32 advertise; + int oldadv, adv; + int err, changed = 0; + + /* Only allow advertising what + * this PHY supports */ + phydev->advertising &= phydev->supported; + advertise = phydev->advertising; + + /* Setup standard advertisement */ + oldadv = adv = phy_read(phydev, MII_ADVERTISE); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + adv |= ethtool_adv_to_mii_adv_t(advertise); + + if (adv != oldadv) { + err = phy_write(phydev, MII_ADVERTISE, adv); + + if (err < 0) + return err; + changed = 1; + } + + /* Configure gigabit if it's supported */ + if (phydev->supported & (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full)) { + oldadv = adv = phy_read(phydev, MII_CTRL1000); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + adv |= ethtool_adv_to_mii_ctrl1000_t(advertise); + + if (adv != oldadv) { + err = phy_write(phydev, MII_CTRL1000, adv); + + if (err < 0) + return err; + changed = 1; + } + } + + return changed; +} + +/** + * genphy_setup_forced - configures/forces speed/duplex from @phydev + * @phydev: target phy_device struct + * + * Description: Configures MII_BMCR to force speed/duplex + * to the values in phydev. Assumes that the values are valid. + * Please see phy_sanitize_settings(). + */ +int genphy_setup_forced(struct phy_device *phydev) +{ + int err; + int ctl = 0; + + phydev->pause = phydev->asym_pause = 0; + + if (SPEED_1000 == phydev->speed) + ctl |= BMCR_SPEED1000; + else if (SPEED_100 == phydev->speed) + ctl |= BMCR_SPEED100; + + if (DUPLEX_FULL == phydev->duplex) + ctl |= BMCR_FULLDPLX; + + err = phy_write(phydev, MII_BMCR, ctl); + + return err; +} + +static int phy_aneg_done(struct phy_device *phydev) +{ + uint64_t start = get_time_ns(); + int ctl; + + while (!is_timeout(start, PHY_AN_TIMEOUT * SECOND)) { + ctl = phy_read(phydev, MII_BMSR); + if (ctl & BMSR_ANEGCOMPLETE) { + phydev->link = 1; + return 0; + } + + /* Restart auto-negotiation if remote fault */ + if (ctl & BMSR_RFAULT) { + puts("PHY remote fault detected\n" + "PHY restarting auto-negotiation\n"); + phy_write(phydev, MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART); + } + } + + phydev->link = 0; + return -ETIMEDOUT; +} + +/** + * genphy_restart_aneg - Enable and Restart Autonegotiation + * @phydev: target phy_device struct + */ +int genphy_restart_aneg(struct phy_device *phydev) +{ + int ctl; + + ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + + /* Don't isolate the PHY if we're negotiating */ + ctl &= ~(BMCR_ISOLATE); + + ctl = phy_write(phydev, MII_BMCR, ctl); + + if (ctl < 0) + return ctl; + + return phy_aneg_done(phydev); +} + +/** + * genphy_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. + */ +int genphy_config_aneg(struct phy_device *phydev) +{ + int result; + + if (AUTONEG_ENABLE != phydev->autoneg) + return genphy_setup_forced(phydev); + + result = genphy_config_advert(phydev); + + if (result < 0) /* error */ + return result; + + if (result == 0) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + result = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. */ + if (result > 0) + result = genphy_restart_aneg(phydev); + + return result; +} + +/** + * genphy_update_link - update link status in @phydev + * @phydev: target phy_device struct + * + * Description: Update the value in phydev->link to reflect the + * current link value. In order to do this, we need to read + * the status register twice, keeping the second value. + */ +int genphy_update_link(struct phy_device *phydev) +{ + int status; + + /* Do a fake read */ + status = phy_read(phydev, MII_BMSR); + + if (status < 0) + return status; + + /* wait phy status update in the phy */ + udelay(1000); + + /* Read link and autonegotiation status */ + status = phy_read(phydev, MII_BMSR); + + if (status < 0) + return status; + + if ((status & BMSR_LSTATUS) == 0) + phydev->link = 0; + else + phydev->link = 1; + + return 0; +} + +/** + * genphy_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. Start by checking the gigabit possibilities, + * then move on to 10/100. + */ +int genphy_read_status(struct phy_device *phydev) +{ + int adv; + int err; + int lpa; + int lpagb = 0; + + /* Update the link, but return if there + * was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + if (AUTONEG_ENABLE == phydev->autoneg) { + if (phydev->supported & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + lpagb = phy_read(phydev, MII_STAT1000); + + if (lpagb < 0) + return lpagb; + + adv = phy_read(phydev, MII_CTRL1000); + + if (adv < 0) + return adv; + + lpagb &= adv << 2; + } + + lpa = phy_read(phydev, MII_LPA); + + if (lpa < 0) + return lpa; + + adv = phy_read(phydev, MII_ADVERTISE); + + if (adv < 0) + return adv; + + lpa &= adv; + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + phydev->pause = phydev->asym_pause = 0; + + if (lpagb & (LPA_1000FULL | LPA_1000HALF)) { + phydev->speed = SPEED_1000; + + if (lpagb & LPA_1000FULL) + phydev->duplex = DUPLEX_FULL; + } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (lpa & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + } else + if (lpa & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + + if (phydev->duplex == DUPLEX_FULL) { + phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + phydev->pause = phydev->asym_pause = 0; + } + + return 0; +} + +static int genphy_config_init(struct phy_device *phydev) +{ + int val; + u32 features; + + /* For now, I'll claim that the generic driver supports + * all possible port types */ + features = (SUPPORTED_TP | SUPPORTED_MII + | SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC); + + /* Do we support autonegotiation? */ + val = phy_read(phydev, MII_BMSR); + + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MII_ESTATUS); + + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported = features; + phydev->advertising = features; + + return 0; +} + +int phy_driver_register(struct phy_driver *phydrv) +{ + phydrv->drv.bus = &mdio_bus_type; + + if (!phydrv->config_init) + phydrv->config_init = genphy_config_init; + + if (!phydrv->config_aneg) + phydrv->config_aneg = genphy_config_aneg; + + if (!phydrv->read_status) + phydrv->read_status = genphy_read_status; + + return register_driver(&phydrv->drv); +} diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c index cbd9f48..3da7b82 100644 --- a/drivers/net/smc91111.c +++ b/drivers/net/smc91111.c @@ -67,13 +67,13 @@ #include #include -#include #include #include #include #include #include #include +#include /*--------------------------------------------------------------- . @@ -451,7 +451,7 @@ struct accessors { }; struct smc91c111_priv { - struct mii_device miidev; + struct mii_bus miibus; struct accessors a; void __iomem *base; }; @@ -621,11 +621,10 @@ static void smc_wait_mmu_release_complete(struct smc91c111_priv *priv) } } -static int smc91c111_phy_write(struct mii_device *mdev, int phyaddr, - int phyreg, int phydata) +static int smc91c111_phy_write(struct mii_bus *bus, int phyaddr, + int phyreg, u16 phydata) { - struct eth_device *edev = mdev->edev; - struct smc91c111_priv *priv = (struct smc91c111_priv *)edev->priv; + struct smc91c111_priv *priv = (struct smc91c111_priv *)bus->priv; int oldBank; int i; unsigned mask; @@ -723,10 +722,9 @@ static int smc91c111_phy_write(struct mii_device *mdev, int phyaddr, return 0; } -static int smc91c111_phy_read(struct mii_device *mdev, int phyaddr, int phyreg) +static int smc91c111_phy_read(struct mii_bus *bus, int phyaddr, int phyreg) { - struct eth_device *edev = mdev->edev; - struct smc91c111_priv *priv = (struct smc91c111_priv *)edev->priv; + struct smc91c111_priv *priv = (struct smc91c111_priv *)bus->priv; int oldBank; int i; unsigned char mask; @@ -892,12 +890,15 @@ static void smc91c111_enable(struct eth_device *edev) static int smc91c111_eth_open(struct eth_device *edev) { struct smc91c111_priv *priv = (struct smc91c111_priv *)edev->priv; - smc91c111_enable(edev); - miidev_wait_aneg(&priv->miidev); - miidev_print_status(&priv->miidev); + /* Configure the Receive/Phy Control register */ + SMC_SELECT_BANK(priv, 0); + SMC_outw(priv, RPC_DEFAULT, RPC_REG); - return 0; + smc91c111_enable(edev); + + return phy_device_connect(edev, &priv->miibus, 0, NULL, + 0, PHY_INTERFACE_MODE_NA); } static int smc91c111_eth_send(struct eth_device *edev, void *packet, @@ -1279,14 +1280,6 @@ static void print_packet( unsigned char * buf, int length ) static int smc91c111_init_dev(struct eth_device *edev) { - struct smc91c111_priv *priv = (struct smc91c111_priv *)edev->priv; - - /* Configure the Receive/Phy Control register */ - SMC_SELECT_BANK(priv, 0); - SMC_outw(priv, RPC_DEFAULT, RPC_REG); - - miidev_restart_aneg(&priv->miidev); - return 0; } @@ -1312,17 +1305,15 @@ static int smc91c111_probe(struct device_d *dev) edev->set_ethaddr = smc91c111_set_ethaddr; edev->parent = dev; - priv->miidev.read = smc91c111_phy_read; - priv->miidev.write = smc91c111_phy_write; - priv->miidev.address = 0; - priv->miidev.flags = 0; - priv->miidev.edev = edev; - priv->miidev.parent = dev; + priv->miibus.read = smc91c111_phy_read; + priv->miibus.write = smc91c111_phy_write; + priv->miibus.priv = priv; + priv->miibus.parent = dev; priv->base = dev_request_mem_region(dev, 0); smc91c111_reset(edev); - mii_register(&priv->miidev); + mdiobus_register(&priv->miibus); eth_register(edev); return 0; diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index f697608..c58ea72 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -30,7 +30,6 @@ #include #include -#include #include #include #include @@ -38,12 +37,13 @@ #include #include #include +#include #include "smc911x.h" struct smc911x_priv { struct eth_device edev; - struct mii_device miidev; + struct mii_bus miibus; void __iomem *base; int shift; @@ -198,9 +198,9 @@ static int smc911x_set_ethaddr(struct eth_device *edev, unsigned char *m) return 0; } -static int smc911x_phy_read(struct mii_device *mdev, int phy_addr, int reg) +static int smc911x_phy_read(struct mii_bus *bus, int phy_addr, int reg) { - struct eth_device *edev = mdev->edev; + struct eth_device *edev = bus->priv; while (smc911x_get_mac_csr(edev, MII_ACC) & MII_ACC_MII_BUSY); @@ -212,10 +212,10 @@ static int smc911x_phy_read(struct mii_device *mdev, int phy_addr, int reg) return smc911x_get_mac_csr(edev, MII_DATA); } -static int smc911x_phy_write(struct mii_device *mdev, int phy_addr, - int reg, int val) +static int smc911x_phy_write(struct mii_bus *bus, int phy_addr, + int reg, u16 val) { - struct eth_device *edev = mdev->edev; + struct eth_device *edev = bus->priv; while (smc911x_get_mac_csr(edev, MII_ACC) & MII_ACC_MII_BUSY); @@ -308,9 +308,12 @@ static void smc911x_enable(struct eth_device *edev) static int smc911x_eth_open(struct eth_device *edev) { struct smc911x_priv *priv = (struct smc911x_priv *)edev->priv; + int ret; - miidev_wait_aneg(&priv->miidev); - miidev_print_status(&priv->miidev); + ret = phy_device_connect(edev, &priv->miibus, 1, NULL, + 0, PHY_INTERFACE_MODE_NA); + if (ret) + return ret; /* Turn on Tx + Rx */ smc911x_enable(edev); @@ -405,13 +408,9 @@ static int smc911x_eth_rx(struct eth_device *edev) static int smc911x_init_dev(struct eth_device *edev) { - struct smc911x_priv *priv = (struct smc911x_priv *)edev->priv; - smc911x_set_mac_csr(edev, MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS); - miidev_restart_aneg(&priv->miidev); - return 0; } @@ -536,17 +535,15 @@ static int smc911x_probe(struct device_d *dev) edev->set_ethaddr = smc911x_set_ethaddr; edev->parent = dev; - priv->miidev.read = smc911x_phy_read; - priv->miidev.write = smc911x_phy_write; - priv->miidev.address = 1; - priv->miidev.flags = 0; - priv->miidev.edev = edev; - priv->miidev.parent = dev; + priv->miibus.read = smc911x_phy_read; + priv->miibus.write = smc911x_phy_write; + priv->miibus.priv = edev; + priv->miibus.parent = dev; smc911x_reset(edev); smc911x_phy_reset(edev); - mii_register(&priv->miidev); + mdiobus_register(&priv->miibus); eth_register(edev); return 0; diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index b53dcc7..adb1b0b 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -5,11 +5,11 @@ menuconfig NET_USB if NET_USB config NET_USB_ASIX - select MIIDEV + select PHYLIB bool "Asix compatible" config NET_USB_SMSC95XX - select MIIDEV + select PHYLIB bool "SMSC95xx" endif diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index be5a170..97680cf 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1,7 +1,7 @@ #include #include #include -#include +#include #include #include #include @@ -231,10 +231,9 @@ static inline int asix_set_hw_mii(struct usbnet *dev) return ret; } -static int asix_mdio_read(struct mii_device *mdev, int phy_id, int loc) +static int asix_mdio_read(struct mii_bus *bus, int phy_id, int loc) { - struct eth_device *eth = mdev->edev; - struct usbnet *dev = eth->priv; + struct usbnet *dev = bus->priv; __le16 res; asix_set_sw_mii(dev); @@ -248,10 +247,9 @@ static int asix_mdio_read(struct mii_device *mdev, int phy_id, int loc) return le16_to_cpu(res); } -static int asix_mdio_write(struct mii_device *mdev, int phy_id, int loc, int val) +static int asix_mdio_write(struct mii_bus *bus, int phy_id, int loc, u16 val) { - struct eth_device *eth = mdev->edev; - struct usbnet *dev = eth->priv; + struct usbnet *dev = bus->priv; __le16 res = cpu_to_le16(val); dev_dbg(&dev->edev.dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", @@ -469,14 +467,13 @@ static int asix_tx_fixup(struct usbnet *dev, static int asix_init_mii(struct usbnet *dev) { - dev->miidev.read = asix_mdio_read; - dev->miidev.write = asix_mdio_write; - dev->miidev.address = asix_get_phy_addr(dev); - dev->miidev.flags = 0; - dev->miidev.edev = &dev->edev; - dev->miidev.parent = &dev->udev->dev; - - return mii_register(&dev->miidev); + dev->miibus.read = asix_mdio_read; + dev->miibus.write = asix_mdio_write; + dev->phy_addr = asix_get_phy_addr(dev); + dev->miibus.priv = dev; + dev->miibus.parent = &dev->udev->dev; + + return mdiobus_register(&dev->miibus); } static int ax88172_link_reset(struct usbnet *dev) @@ -631,7 +628,7 @@ out: static void asix_unbind(struct usbnet *dev) { - mii_unregister(&dev->miidev); + mdiobus_unregister(&dev->miibus); } static struct driver_info ax8817x_info = { diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index c21705e..11f2795 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include "smsc95xx.h" #define SMSC_CHIPNAME "smsc95xx" @@ -123,10 +123,9 @@ static int smsc95xx_phy_wait_not_busy(struct usbnet *dev) return -EIO; } -static int smsc95xx_mdio_read(struct mii_device *mdev, int phy_id, int idx) +static int smsc95xx_mdio_read(struct mii_bus *bus, int phy_id, int idx) { - struct eth_device *eth = mdev->edev; - struct usbnet *dev = eth->priv; + struct usbnet *dev = bus->priv; u32 val, addr; /* confirm MII not busy */ @@ -149,11 +148,10 @@ static int smsc95xx_mdio_read(struct mii_device *mdev, int phy_id, int idx) return val & 0xffff; } -static int smsc95xx_mdio_write(struct mii_device *mdev, int phy_id, int idx, - int regval) +static int smsc95xx_mdio_write(struct mii_bus *bus, int phy_id, int idx, + u16 regval) { - struct eth_device *eth = mdev->edev; - struct usbnet *dev = eth->priv; + struct usbnet *dev = bus->priv; u32 val, addr; /* confirm MII not busy */ @@ -439,20 +437,19 @@ static int smsc95xx_phy_initialize(struct usbnet *dev) uint16_t val, bmcr; /* Initialize MII structure */ - dev->miidev.read = smsc95xx_mdio_read; - dev->miidev.write = smsc95xx_mdio_write; - dev->miidev.address = 1; /* FIXME: asix_get_phy_addr(dev); */ - dev->miidev.flags = 0; - dev->miidev.edev = &dev->edev; - dev->miidev.parent = &dev->udev->dev; -// dev->miidev.name = dev->edev.name; + dev->miibus.read = smsc95xx_mdio_read; + dev->miibus.write = smsc95xx_mdio_write; + dev->phy_addr = 1; /* FIXME: asix_get_phy_addr(dev); */ + dev->miibus.priv = dev; + dev->miibus.parent = &dev->udev->dev; +// dev->miibus.name = dev->edev.name; /* reset phy and wait for reset to complete */ - smsc95xx_mdio_write(&dev->miidev, phy_id, MII_BMCR, BMCR_RESET); + smsc95xx_mdio_write(&dev->miibus, phy_id, MII_BMCR, BMCR_RESET); do { udelay(10 * 1000); - bmcr = smsc95xx_mdio_read(&dev->miidev, phy_id, MII_BMCR); + bmcr = smsc95xx_mdio_read(&dev->miibus, phy_id, MII_BMCR); timeout++; } while ((bmcr & MII_BMCR) && (timeout < 100)); @@ -461,14 +458,14 @@ static int smsc95xx_phy_initialize(struct usbnet *dev) return -EIO; } - smsc95xx_mdio_write(&dev->miidev, phy_id, MII_ADVERTISE, + smsc95xx_mdio_write(&dev->miibus, phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); /* read to clear */ - val = smsc95xx_mdio_read(&dev->miidev, phy_id, PHY_INT_SRC); + val = smsc95xx_mdio_read(&dev->miibus, phy_id, PHY_INT_SRC); - smsc95xx_mdio_write(&dev->miidev, phy_id, PHY_INT_MASK, + smsc95xx_mdio_write(&dev->miibus, phy_id, PHY_INT_MASK, PHY_INT_MASK_DEFAULT_); netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n"); @@ -751,7 +748,7 @@ static int smsc95xx_bind(struct usbnet *dev) dev->edev.get_ethaddr = smsc95xx_get_ethaddr; dev->edev.set_ethaddr = smsc95xx_set_ethaddr; - mii_register(&dev->miidev); + mdiobus_register(&dev->miibus); return 0; } @@ -760,7 +757,7 @@ static void smsc95xx_unbind(struct usbnet *dev) { struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); - mii_unregister(&dev->miidev); + mdiobus_unregister(&dev->miibus); if (pdata) { netif_dbg(dev, ifdown, dev->net, "free pdata\n"); diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index c7e3606..80b4ae7 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -4,6 +4,7 @@ #include #include #include +#include static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) { @@ -160,8 +161,6 @@ static int usbnet_init(struct eth_device *edev) return ret; } - miidev_restart_aneg(&dev->miidev); - return 0; } @@ -171,12 +170,8 @@ static int usbnet_open(struct eth_device *edev) dev_dbg(&edev->dev, "%s\n",__func__); - if (miidev_wait_aneg(&dev->miidev)) - return -1; - - miidev_print_status(&dev->miidev); - - return 0; + return phy_device_connect(edev, &dev->miibus, dev->phy_addr, NULL, + 0, PHY_INTERFACE_MODE_NA); } static void usbnet_halt(struct eth_device *edev) diff --git a/include/fec.h b/include/fec.h index f56b023..6e1e1cd 100644 --- a/include/fec.h +++ b/include/fec.h @@ -25,6 +25,8 @@ #ifndef __INCLUDE_NETWORK_FEC_H #define __INCLUDE_NETWORK_FEC_H +#include + /* * Supported phy types on this platform */ @@ -43,6 +45,7 @@ typedef enum { struct fec_platform_data { xceiver_type xcv_type; int phy_addr; + void (*phy_init)(struct phy_device *dev); }; #endif /* __INCLUDE_NETWORK_FEC_H */ diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h new file mode 100644 index 0000000..4d83fe0 --- /dev/null +++ b/include/linux/ethtool.h @@ -0,0 +1,114 @@ +/* + * ethtool.h: Defines for Linux ethtool. + * + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * Copyright 2001 Jeff Garzik + * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) + * Portions Copyright 2002 Intel (eli.kupermann@intel.com, + * christopher.leech@intel.com, + * scott.feldman@intel.com) + * Portions Copyright (C) Sun Microsystems 2008 + */ + +#ifndef _LINUX_ETHTOOL_H +#define _LINUX_ETHTOOL_H + +/* Indicates what features are supported by the interface. */ +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) +#define SUPPORTED_Pause (1 << 13) +#define SUPPORTED_Asym_Pause (1 << 14) +#define SUPPORTED_2500baseX_Full (1 << 15) +#define SUPPORTED_Backplane (1 << 16) +#define SUPPORTED_1000baseKX_Full (1 << 17) +#define SUPPORTED_10000baseKX4_Full (1 << 18) +#define SUPPORTED_10000baseKR_Full (1 << 19) +#define SUPPORTED_10000baseR_FEC (1 << 20) + +/* Indicates what features are advertised by the interface. */ +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) +#define ADVERTISED_Pause (1 << 13) +#define ADVERTISED_Asym_Pause (1 << 14) +#define ADVERTISED_2500baseX_Full (1 << 15) +#define ADVERTISED_Backplane (1 << 16) +#define ADVERTISED_1000baseKX_Full (1 << 17) +#define ADVERTISED_10000baseKX4_Full (1 << 18) +#define ADVERTISED_10000baseKR_Full (1 << 19) +#define ADVERTISED_10000baseR_FEC (1 << 20) + +/* The following are all involved in forcing a particular link + * mode for the device for setting things. When getting the + * devices settings, these indicate the current mode and whether + * it was foced up into this mode or autonegotiated. + */ + +/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_2500 2500 +#define SPEED_10000 10000 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 + +/* Which connector port. */ +#define PORT_TP 0x00 +#define PORT_AUI 0x01 +#define PORT_MII 0x02 +#define PORT_FIBRE 0x03 +#define PORT_BNC 0x04 +#define PORT_OTHER 0xff + +/* Which transceiver to use. */ +#define XCVR_INTERNAL 0x00 +#define XCVR_EXTERNAL 0x01 +#define XCVR_DUMMY1 0x02 +#define XCVR_DUMMY2 0x03 +#define XCVR_DUMMY3 0x04 + +/* Enable or disable autonegotiation. If this is set to enable, + * the forced link modes above are completely ignored. + */ +#define AUTONEG_DISABLE 0x00 +#define AUTONEG_ENABLE 0x01 + +/* Mode MDI or MDI-X */ +#define ETH_TP_MDI_INVALID 0x00 +#define ETH_TP_MDI 0x01 +#define ETH_TP_MDI_X 0x02 + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +#endif /* _LINUX_ETHTOOL_H */ diff --git a/include/linux/mii.h b/include/linux/mii.h dissimilarity index 70% index 7345172..5bac6c2 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -1,232 +1,443 @@ -/* - * linux/mii.h: definitions for MII-compatible transceivers - * Originally drivers/net/sunhme.h. - * - * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) - */ - -#ifndef __LINUX_MII_H__ -#define __LINUX_MII_H__ - -/* Generic MII registers. */ - -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -#define MII_ESTATUS 0x0f /* Extended Status */ -#define MII_DCOUNTER 0x12 /* Disconnect counter */ -#define MII_FCSCOUNTER 0x13 /* False carrier counter */ -#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ -#define MII_RERRCOUNTER 0x15 /* Receive error counter */ -#define MII_SREVISION 0x16 /* Silicon revision */ -#define MII_RESV1 0x17 /* Reserved... */ -#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ -#define MII_PHYADDR 0x19 /* PHY address */ -#define MII_RESV2 0x1a /* Reserved... */ -#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ -#define MII_NCONFIG 0x1c /* Network interface config */ - -/* Basic mode control register. */ -#define BMCR_SPEED_MASK 0x2040 /* 10/100/1000 */ -#define BMCR_SPEED10 0x0000 /* Select 10Mbps */ -#define BMCR_RESV 0x003f /* Unused... */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ -#define BMCR_CTST 0x0080 /* Collision test */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ -#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ -#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ -#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ -#define BMCR_RESET 0x8000 /* Reset the DP83840 */ - -/* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_JCD 0x0002 /* Jabber detected */ -#define BMSR_LSTATUS 0x0004 /* Link status */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_RFAULT 0x0010 /* Remote fault detected */ -#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x00c0 /* Unused... */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ -#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ - -/* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ -#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ -#define ADVERTISE_RESV 0x1000 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ - -#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) - -/* Link partner ability register. */ -#define LPA_SLCT 0x001f /* Same as advertise selector */ -#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ -#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ -#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ -#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ -#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ -#define LPA_PAUSE_CAP 0x0400 /* Can pause */ -#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ -#define LPA_RESV 0x1000 /* Unused... */ -#define LPA_RFAULT 0x2000 /* Link partner faulted */ -#define LPA_LPACK 0x4000 /* Link partner acked us */ -#define LPA_NPAGE 0x8000 /* Next page bit */ - -#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) -#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) - -/* Expansion register for auto-negotiation. */ -#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ -#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ -#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ -#define EXPANSION_RESV 0xffe0 /* Unused... */ - -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ - -/* N-way test register. */ -#define NWAYTEST_RESV1 0x00ff /* Unused... */ -#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ -#define NWAYTEST_RESV2 0xfe00 /* Unused... */ - -/* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ - -/* 1000BASE-T Status register */ -#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ -#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ -#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ -#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ - -/* Flow control flags */ -#define FLOW_CTRL_TX 0x01 -#define FLOW_CTRL_RX 0x02 - -/** - * mii_nway_result - * @negotiated: value of MII ANAR and'd with ANLPAR - * - * Given a set of MII abilities, check each bit and returns the - * currently supported media, in the priority order defined by - * IEEE 802.3u. We use LPA_xxx constants but note this is not the - * value of LPA solely, as described above. - * - * The one exception to IEEE 802.3u is that 100baseT4 is placed - * between 100T-full and 100T-half. If your phy does not support - * 100T4 this is fine. If your phy places 100T4 elsewhere in the - * priority order, you will need to roll your own function. - */ -static inline unsigned int mii_nway_result (unsigned int negotiated) -{ - unsigned int ret; - - if (negotiated & LPA_100FULL) - ret = LPA_100FULL; - else if (negotiated & LPA_100BASE4) - ret = LPA_100BASE4; - else if (negotiated & LPA_100HALF) - ret = LPA_100HALF; - else if (negotiated & LPA_10FULL) - ret = LPA_10FULL; - else - ret = LPA_10HALF; - - return ret; -} - -/** - * mii_duplex - * @duplex_lock: Non-zero if duplex is locked at full - * @negotiated: value of MII ANAR and'd with ANLPAR - * - * A small helper function for a common case. Returns one - * if the media is operating or locked at full duplex, and - * returns zero otherwise. - */ -static inline unsigned int mii_duplex (unsigned int duplex_lock, - unsigned int negotiated) -{ - if (duplex_lock) - return 1; - if (mii_nway_result(negotiated) & LPA_DUPLEX) - return 1; - return 0; -} - -/** - * mii_advertise_flowctrl - get flow control advertisement flags - * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both) - */ -static inline u16 mii_advertise_flowctrl(int cap) -{ - u16 adv = 0; - - if (cap & FLOW_CTRL_RX) - adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; - if (cap & FLOW_CTRL_TX) - adv ^= ADVERTISE_PAUSE_ASYM; - - return adv; -} - -/** - * mii_resolve_flowctrl_fdx - * @lcladv: value of MII ADVERTISE register - * @rmtadv: value of MII LPA register - * - * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3 - */ -static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) -{ - u8 cap = 0; - - if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) { - cap = FLOW_CTRL_TX | FLOW_CTRL_RX; - } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) { - if (lcladv & ADVERTISE_PAUSE_CAP) - cap = FLOW_CTRL_RX; - else if (rmtadv & ADVERTISE_PAUSE_CAP) - cap = FLOW_CTRL_TX; - } - - return cap; -} - -#endif /* __LINUX_MII_H__ */ +/* + * linux/mii.h: definitions for MII-compatible transceivers + * Originally drivers/net/sunhme.h. + * + * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) + */ + +#ifndef __LINUX_MII_H__ +#define __LINUX_MII_H__ + +#include +#include + +/* Generic MII registers. */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ +#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ +#define MII_ESTATUS 0x0f /* Extended Status */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ + +/* Basic mode control register. */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ +#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */ +#define BMCR_PDOWN 0x0800 /* Enable low power state */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset to default state */ + +/* Basic mode status register. */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_RFAULT 0x0010 /* Remote fault detected */ +#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ +#define BMSR_RESV 0x00c0 /* Unused... */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ +#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ + +/* Advertisement control register. */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ +#define ADVERTISE_RESV 0x1000 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ + +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) + +/* Link partner ability register. */ +#define LPA_SLCT 0x001f /* Same as advertise selector */ +#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ +#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ +#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ +#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ +#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ +#define LPA_PAUSE_CAP 0x0400 /* Can pause */ +#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ +#define LPA_RESV 0x1000 /* Unused... */ +#define LPA_RFAULT 0x2000 /* Link partner faulted */ +#define LPA_LPACK 0x4000 /* Link partner acked us */ +#define LPA_NPAGE 0x8000 /* Next page bit */ + +#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) +#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) + +/* Expansion register for auto-negotiation. */ +#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ +#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ +#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ + +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ + +/* N-way test register. */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ + +/* 1000BASE-T Control register */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define CTL1000_AS_MASTER 0x0800 +#define CTL1000_ENABLE_MASTER 0x1000 + +/* 1000BASE-T Status register */ +#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ +#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ +#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ +#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ + +/* Flow control flags */ +#define FLOW_CTRL_TX 0x01 +#define FLOW_CTRL_RX 0x02 + +/* MMD Access Control register fields */ +#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ +#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ +#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ +#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ +#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ + + +/** + * mii_nway_result + * @negotiated: value of MII ANAR and'd with ANLPAR + * + * Given a set of MII abilities, check each bit and returns the + * currently supported media, in the priority order defined by + * IEEE 802.3u. We use LPA_xxx constants but note this is not the + * value of LPA solely, as described above. + * + * The one exception to IEEE 802.3u is that 100baseT4 is placed + * between 100T-full and 100T-half. If your phy does not support + * 100T4 this is fine. If your phy places 100T4 elsewhere in the + * priority order, you will need to roll your own function. + */ +static inline unsigned int mii_nway_result (unsigned int negotiated) +{ + unsigned int ret; + + if (negotiated & LPA_100FULL) + ret = LPA_100FULL; + else if (negotiated & LPA_100BASE4) + ret = LPA_100BASE4; + else if (negotiated & LPA_100HALF) + ret = LPA_100HALF; + else if (negotiated & LPA_10FULL) + ret = LPA_10FULL; + else + ret = LPA_10HALF; + + return ret; +} + +/** + * mii_duplex + * @duplex_lock: Non-zero if duplex is locked at full + * @negotiated: value of MII ANAR and'd with ANLPAR + * + * A small helper function for a common case. Returns one + * if the media is operating or locked at full duplex, and + * returns zero otherwise. + */ +static inline unsigned int mii_duplex (unsigned int duplex_lock, + unsigned int negotiated) +{ + if (duplex_lock) + return 1; + if (mii_nway_result(negotiated) & LPA_DUPLEX) + return 1; + return 0; +} + +/** + * ethtool_adv_to_mii_adv_t + * @ethadv: the ethtool advertisement settings + * + * A small helper function that translates ethtool advertisement + * settings to phy autonegotiation advertisements for the + * MII_ADVERTISE register. + */ +static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv) +{ + u32 result = 0; + + if (ethadv & ADVERTISED_10baseT_Half) + result |= ADVERTISE_10HALF; + if (ethadv & ADVERTISED_10baseT_Full) + result |= ADVERTISE_10FULL; + if (ethadv & ADVERTISED_100baseT_Half) + result |= ADVERTISE_100HALF; + if (ethadv & ADVERTISED_100baseT_Full) + result |= ADVERTISE_100FULL; + if (ethadv & ADVERTISED_Pause) + result |= ADVERTISE_PAUSE_CAP; + if (ethadv & ADVERTISED_Asym_Pause) + result |= ADVERTISE_PAUSE_ASYM; + + return result; +} + +/** + * mii_adv_to_ethtool_adv_t + * @adv: value of the MII_ADVERTISE register + * + * A small helper function that translates MII_ADVERTISE bits + * to ethtool advertisement settings. + */ +static inline u32 mii_adv_to_ethtool_adv_t(u32 adv) +{ + u32 result = 0; + + if (adv & ADVERTISE_10HALF) + result |= ADVERTISED_10baseT_Half; + if (adv & ADVERTISE_10FULL) + result |= ADVERTISED_10baseT_Full; + if (adv & ADVERTISE_100HALF) + result |= ADVERTISED_100baseT_Half; + if (adv & ADVERTISE_100FULL) + result |= ADVERTISED_100baseT_Full; + if (adv & ADVERTISE_PAUSE_CAP) + result |= ADVERTISED_Pause; + if (adv & ADVERTISE_PAUSE_ASYM) + result |= ADVERTISED_Asym_Pause; + + return result; +} + +/** + * ethtool_adv_to_mii_ctrl1000_t + * @ethadv: the ethtool advertisement settings + * + * A small helper function that translates ethtool advertisement + * settings to phy autonegotiation advertisements for the + * MII_CTRL1000 register when in 1000T mode. + */ +static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv) +{ + u32 result = 0; + + if (ethadv & ADVERTISED_1000baseT_Half) + result |= ADVERTISE_1000HALF; + if (ethadv & ADVERTISED_1000baseT_Full) + result |= ADVERTISE_1000FULL; + + return result; +} + +/** + * mii_ctrl1000_to_ethtool_adv_t + * @adv: value of the MII_CTRL1000 register + * + * A small helper function that translates MII_CTRL1000 + * bits, when in 1000Base-T mode, to ethtool + * advertisement settings. + */ +static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv) +{ + u32 result = 0; + + if (adv & ADVERTISE_1000HALF) + result |= ADVERTISED_1000baseT_Half; + if (adv & ADVERTISE_1000FULL) + result |= ADVERTISED_1000baseT_Full; + + return result; +} + +/** + * mii_lpa_to_ethtool_lpa_t + * @adv: value of the MII_LPA register + * + * A small helper function that translates MII_LPA + * bits, when in 1000Base-T mode, to ethtool + * LP advertisement settings. + */ +static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa) +{ + u32 result = 0; + + if (lpa & LPA_LPACK) + result |= ADVERTISED_Autoneg; + + return result | mii_adv_to_ethtool_adv_t(lpa); +} + +/** + * mii_stat1000_to_ethtool_lpa_t + * @adv: value of the MII_STAT1000 register + * + * A small helper function that translates MII_STAT1000 + * bits, when in 1000Base-T mode, to ethtool + * advertisement settings. + */ +static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa) +{ + u32 result = 0; + + if (lpa & LPA_1000HALF) + result |= ADVERTISED_1000baseT_Half; + if (lpa & LPA_1000FULL) + result |= ADVERTISED_1000baseT_Full; + + return result; +} + +/** + * ethtool_adv_to_mii_adv_x + * @ethadv: the ethtool advertisement settings + * + * A small helper function that translates ethtool advertisement + * settings to phy autonegotiation advertisements for the + * MII_CTRL1000 register when in 1000Base-X mode. + */ +static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv) +{ + u32 result = 0; + + if (ethadv & ADVERTISED_1000baseT_Half) + result |= ADVERTISE_1000XHALF; + if (ethadv & ADVERTISED_1000baseT_Full) + result |= ADVERTISE_1000XFULL; + if (ethadv & ADVERTISED_Pause) + result |= ADVERTISE_1000XPAUSE; + if (ethadv & ADVERTISED_Asym_Pause) + result |= ADVERTISE_1000XPSE_ASYM; + + return result; +} + +/** + * mii_adv_to_ethtool_adv_x + * @adv: value of the MII_CTRL1000 register + * + * A small helper function that translates MII_CTRL1000 + * bits, when in 1000Base-X mode, to ethtool + * advertisement settings. + */ +static inline u32 mii_adv_to_ethtool_adv_x(u32 adv) +{ + u32 result = 0; + + if (adv & ADVERTISE_1000XHALF) + result |= ADVERTISED_1000baseT_Half; + if (adv & ADVERTISE_1000XFULL) + result |= ADVERTISED_1000baseT_Full; + if (adv & ADVERTISE_1000XPAUSE) + result |= ADVERTISED_Pause; + if (adv & ADVERTISE_1000XPSE_ASYM) + result |= ADVERTISED_Asym_Pause; + + return result; +} + +/** + * mii_lpa_to_ethtool_lpa_x + * @adv: value of the MII_LPA register + * + * A small helper function that translates MII_LPA + * bits, when in 1000Base-X mode, to ethtool + * LP advertisement settings. + */ +static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa) +{ + u32 result = 0; + + if (lpa & LPA_LPACK) + result |= ADVERTISED_Autoneg; + + return result | mii_adv_to_ethtool_adv_x(lpa); +} + +/** + * mii_advertise_flowctrl - get flow control advertisement flags + * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both) + */ +static inline u16 mii_advertise_flowctrl(int cap) +{ + u16 adv = 0; + + if (cap & FLOW_CTRL_RX) + adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + if (cap & FLOW_CTRL_TX) + adv ^= ADVERTISE_PAUSE_ASYM; + + return adv; +} + +/** + * mii_resolve_flowctrl_fdx + * @lcladv: value of MII ADVERTISE register + * @rmtadv: value of MII LPA register + * + * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3 + */ +static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) +{ + u8 cap = 0; + + if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) { + cap = FLOW_CTRL_TX | FLOW_CTRL_RX; + } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) { + if (lcladv & ADVERTISE_PAUSE_CAP) + cap = FLOW_CTRL_RX; + else if (rmtadv & ADVERTISE_PAUSE_CAP) + cap = FLOW_CTRL_TX; + } + + return cap; +} + +#endif /* __LINUX_MII_H__ */ diff --git a/include/linux/phy.h b/include/linux/phy.h new file mode 100644 index 0000000..8fe6b86 --- /dev/null +++ b/include/linux/phy.h @@ -0,0 +1,266 @@ +/* + * Copyright (c) 2009-2012 Jean-Christophe PLAGNIOL-VILLARD + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __PHY_H +#define __PHY_H + +#include +#include +#include + +#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) + +#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) + +/* Interface Mode definitions */ +typedef enum { + PHY_INTERFACE_MODE_NA, + PHY_INTERFACE_MODE_MII, + PHY_INTERFACE_MODE_GMII, + PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_TBI, + PHY_INTERFACE_MODE_RMII, + PHY_INTERFACE_MODE_RGMII, + PHY_INTERFACE_MODE_RGMII_ID, + PHY_INTERFACE_MODE_RGMII_RXID, + PHY_INTERFACE_MODE_RGMII_TXID, + PHY_INTERFACE_MODE_RTBI, + PHY_INTERFACE_MODE_SMII, +} phy_interface_t; + +#define PHY_INIT_TIMEOUT 100000 +#define PHY_FORCE_TIMEOUT 10 +#define PHY_AN_TIMEOUT 10 + +#define PHY_MAX_ADDR 32 + +/* + * Need to be a little smaller than phydev->dev.bus_id to leave room + * for the ":%02x" + */ +#define MII_BUS_ID_SIZE (20 - 3) + +#define PHYLIB_FORCE_10 (1 << 0) +#define PHYLIB_FORCE_LINK (1 << 1) + +#define PHYLIB_CAPABLE_1000M (1 << 0) + +/* + * The Bus class for PHYs. Devices which provide access to + * PHYs should register using this structure + */ +struct mii_bus { + void *priv; + int (*read)(struct mii_bus *bus, int phy_id, int regnum); + int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); + int (*reset)(struct mii_bus *bus); + + struct device_d *parent; + + struct device_d dev; + + /* list of all PHYs on bus */ + struct phy_device *phy_map[PHY_MAX_ADDR]; + + /* PHY addresses to be ignored when probing */ + u32 phy_mask; +}; +#define to_mii_bus(d) container_of(d, struct mii_bus, dev) + +int mdiobus_register(struct mii_bus *bus); +void mdiobus_unregister(struct mii_bus *bus); +struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); + +/** + * mdiobus_read - Convenience function for reading a given MII mgmt register + * @bus: the mii_bus struct + * @addr: the phy address + * @regnum: register number to read + */ +static inline int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum) +{ + return bus->read(bus, addr, regnum); +} + +/** + * mdiobus_write - Convenience function for writing a given MII mgmt register + * @bus: the mii_bus struct + * @addr: the phy address + * @regnum: register number to write + * @val: value to write to @regnum + */ +static inline int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val) +{ + return bus->write(bus, addr, regnum, val); +} + +/* phy_device: An instance of a PHY + * + * bus: Pointer to the bus this PHY is on + * dev: driver model device structure for this PHY + * phy_id: UID for this device found during discovery + * dev_flags: Device-specific flags used by the PHY driver. + * addr: Bus address of PHY + * attached_dev: The attached enet driver's device instance ptr + * + * speed, duplex, pause, supported, advertising, and + * autoneg are used like in mii_if_info + */ +struct phy_device { + struct mii_bus *bus; + + struct device_d dev; + + u32 phy_id; + + u32 dev_flags; + + phy_interface_t interface; + + /* Bus address of the PHY (0-31) */ + int addr; + + /* + * forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + int asym_pause; + + /* The most recently read link state */ + int link; + + /* Union of PHY and Attached devices' supported modes */ + /* See mii.h for more info */ + u32 supported; + u32 advertising; + + int autoneg; + + + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; + + struct eth_device *attached_dev; + + struct cdev cdev; +}; +#define to_phy_device(d) container_of(d, struct phy_device, dev) + +/* struct phy_driver: Driver structure for a particular PHY type + * + * phy_id: The result of reading the UID registers of this PHY + * type, and ANDing them with the phy_id_mask. This driver + * only works for PHYs with IDs which match this field + * phy_id_mask: Defines the important bits of the phy_id + * features: A list of features (speed, duplex, etc) supported + * by this PHY + * + * The drivers must implement config_aneg and read_status. All + * other functions are optional. Note that none of these + * functions should be called from interrupt time. The goal is + * for the bus read/write functions to be able to block when the + * bus transaction is happening, and be freed up by an interrupt + * (The MPC85xx has this ability, though it is not currently + * supported in the driver). + */ +struct phy_driver { + u32 phy_id; + unsigned int phy_id_mask; + u32 features; + + /* + * Called to initialize the PHY, + * including after a reset + */ + int (*config_init)(struct phy_device *phydev); + + /* + * Called during discovery. Used to set + * up device-specific structures, if any + */ + int (*probe)(struct phy_device *phydev); + + /* + * Configures the advertisement and resets + * autonegotiation if phydev->autoneg is on, + * forces the speed to the current settings in phydev + * if phydev->autoneg is off + */ + int (*config_aneg)(struct phy_device *phydev); + + /* Determines the negotiated speed and duplex */ + int (*read_status)(struct phy_device *phydev); + + /* Clears up any memory if needed */ + void (*remove)(struct phy_device *phydev); + + struct driver_d drv; +}; +#define to_phy_driver(d) container_of(d, struct phy_driver, drv) + +#define PHY_ANY_ID "MATCH ANY PHY" +#define PHY_ANY_UID 0xffffffff + +int phy_driver_register(struct phy_driver *drv); +struct phy_device *get_phy_device(struct mii_bus *bus, int addr); +int phy_init(void); + +/** + * phy_read - Convenience function for reading a given PHY register + * @phydev: the phy_device struct + * @regnum: register number to read + */ +static inline int phy_read(struct phy_device *phydev, u32 regnum) +{ + return mdiobus_read(phydev->bus, phydev->addr, regnum); +} + +/** + * phy_write - Convenience function for writing a given PHY register + * @phydev: the phy_device struct + * @regnum: register number to write + * @val: value to write to @regnum + */ +static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) +{ + return mdiobus_write(phydev->bus, phydev->addr, regnum, val); +} + +int phy_device_connect(struct eth_device *dev, struct mii_bus *bus, int addr, + void (*adjust_link) (struct eth_device *edev), + u32 flags, phy_interface_t interface); + +/* Generic PHY support and helper functions */ +int genphy_restart_aneg(struct phy_device *phydev); +int genphy_config_aneg(struct phy_device *phydev); +int genphy_update_link(struct phy_device *phydev); +int genphy_read_status(struct phy_device *phydev); +int genphy_config_advert(struct phy_device *phydev); +int genphy_setup_forced(struct phy_device *phydev); +int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); + +extern struct bus_type mdio_bus_type; +#endif /* __PHYDEV_H__ */ diff --git a/include/miidev.h b/include/miidev.h index 4bbf94c..13f8f85 100644 --- a/include/miidev.h +++ b/include/miidev.h @@ -22,56 +22,23 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -#ifndef __MIIDEV_H__ -#define __MIIDEV_H__ +#ifndef __PHYLIB_H__ +#define __PHYLIB_H__ #include #include -#define MIIDEV_FORCE_10 (1 << 0) -#define MIIDEV_FORCE_LINK (1 << 1) - -#define MIIDEV_CAPABLE_1000M (1 << 0) - -struct mii_device { +struct mii_bus { struct device_d dev; struct device_d *parent; + void *priv; - int address; /* The address the phy has on the bus */ - int (*read) (struct mii_device *dev, int addr, int reg); - int (*write) (struct mii_device *dev, int addr, int reg, int value); - - int flags; - int capabilities; - - struct eth_device *edev; - struct cdev cdev; - struct list_head list; + int (*read) (struct mii_bus *dev, int addr, int reg); + int (*write) (struct mii_bus *dev, int addr, int reg, int value); }; -int mii_register(struct mii_device *dev); -void mii_unregister(struct mii_device *mdev); -int miidev_restart_aneg(struct mii_device *mdev); -int miidev_wait_aneg(struct mii_device *mdev); -int miidev_get_status(struct mii_device *mdev); -#define MIIDEV_STATUS_IS_UP (1 << 0) -#define MIIDEV_STATUS_IS_FULL_DUPLEX (1 << 1) -#define MIIDEV_STATUS_IS_10MBIT (1 << 2) -#define MIIDEV_STATUS_IS_100MBIT (1 << 3) -#define MIIDEV_STATUS_IS_1000MBIT (1 << 4) -int miidev_print_status(struct mii_device *mdev); - -static int inline mii_write(struct mii_device *dev, int addr, int reg, int value) -{ - return dev->write(dev, addr, reg, value); -} - -static int inline mii_read(struct mii_device *dev, int addr, int reg) -{ - return dev->read(dev, addr, reg); -} +int mdiobus_register(struct mii_bus *dev); +void mdiobus_unregister(struct mii_bus *bus); -struct mii_device *mii_open(const char *name); -void mii_close(struct mii_device *mdev); -#endif /* __MIIDEV_H__ */ +#endif /* __PHYLIB_H__ */ diff --git a/include/net.h b/include/net.h index 9152943..39fad12 100644 --- a/include/net.h +++ b/include/net.h @@ -19,6 +19,7 @@ #include #include #include +#include #include /* for nton* / ntoh* stuff */ /* How often do we retry to send packages */ @@ -44,6 +45,9 @@ struct eth_device { struct eth_device *next; void *priv; + /* phy device may attach itself for hardware timestamping */ + struct phy_device *phydev; + struct device_d dev; struct device_d *parent; diff --git a/include/usb/usbnet.h b/include/usb/usbnet.h index 1609b2e..cb8ff03 100644 --- a/include/usb/usbnet.h +++ b/include/usb/usbnet.h @@ -23,7 +23,7 @@ #define __LINUX_USB_USBNET_H #include -#include +#include /* interface from usbnet core to each USB networking link we handle */ struct usbnet { @@ -40,7 +40,8 @@ struct usbnet { /* protocol/interface state */ struct eth_device edev; - struct mii_device miidev; + struct mii_bus miibus; + int phy_addr; int msg_enable; unsigned long data [5]; diff --git a/net/eth.c b/net/eth.c index c034eaa..6cfe4f2 100644 --- a/net/eth.c +++ b/net/eth.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include @@ -139,7 +139,11 @@ int eth_send(void *packet, int length) ret = eth_current->open(eth_current); if (ret) return ret; - eth_current->active = 1; + + if (eth_current->phydev) + eth_current->active = eth_current->phydev->link; + else + eth_current->active = 1; } led_trigger_network(LED_TRIGGER_NET_TX); -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox