From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] i.MX register cleanups
Date: Mon, 24 Sep 2012 12:46:09 +0200 [thread overview]
Message-ID: <1348483583-12586-1-git-send-email-s.hauer@pengutronix.de> (raw)
The following replaces the register base defines from IMX_ to SoC
specific variants. The new names/base address defines are from the
Kernel.
Sascha
----------------------------------------------------------------
Sascha Hauer (14):
ARM i.MX31: give register base addresses a proper MX31_ prefix
ARM i.MX35: give register base addresses a proper MX35_ prefix
ARM i.MX21: give register base addresses a proper MX21_ prefix
ARM i.MX1: give register base addresses a proper MX1_ prefix
ARM i.MX27: give register base addresses a proper MX27_ prefix
ARM i.MX25: give register base addresses a proper MX25_ prefix
ARM i.MX/MXS: Allow to include imx*-regs.h directly
ARM i.MX51: Use defines rather than hardcoded addresses
ARM i.MX: Add header file for WEIM cs setup
ARM i.MX1: Add function to setup chipselect
ARM i.MX21: Add function to setup chipselect
ARM i.MX31: Add function to setup chipselect
ARM i.MX35: Add function to setup chipselect
ARM i.MX25: Add function to setup chipselect
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 32 +--
arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 32 +--
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 5 +-
arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S | 4 +-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 100 ++++-----
arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 24 +-
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 20 +-
.../boards/freescale-mx25-3-stack/lowlevel_init.S | 26 +--
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 88 ++++----
.../boards/freescale-mx35-3-stack/lowlevel_init.S | 6 +-
arch/arm/boards/guf-cupid/board.c | 80 +++----
arch/arm/boards/guf-cupid/lowlevel.c | 28 +--
arch/arm/boards/guf-neso/board.c | 12 +-
arch/arm/boards/guf-neso/lowlevel.c | 4 +-
arch/arm/boards/imx21ads/imx21ads.c | 33 ++-
arch/arm/boards/imx21ads/lowlevel_init.S | 4 +-
arch/arm/boards/imx27ads/imx27ads.c | 5 +-
arch/arm/boards/karo-tx25/board.c | 6 +-
arch/arm/boards/karo-tx25/lowlevel.c | 14 +-
arch/arm/boards/pcm037/lowlevel_init.S | 42 ++--
arch/arm/boards/pcm037/pcm037.c | 66 +++---
arch/arm/boards/pcm038/lowlevel.c | 4 +-
arch/arm/boards/pcm038/pcm038.c | 1 +
arch/arm/boards/pcm038/pcm970.c | 17 +-
arch/arm/boards/pcm043/lowlevel.c | 26 +--
arch/arm/boards/pcm043/pcm043.c | 83 ++++---
arch/arm/boards/phycard-i.MX27/lowlevel_init.S | 4 +-
arch/arm/boards/phycard-i.MX27/pca100.c | 20 +-
arch/arm/boards/scb9328/scb9328.c | 19 +-
arch/arm/mach-imx/external-nand-boot.c | 2 +-
arch/arm/mach-imx/imx1.c | 19 +-
arch/arm/mach-imx/imx21.c | 24 +-
arch/arm/mach-imx/imx25.c | 29 ++-
arch/arm/mach-imx/imx27.c | 27 ++-
arch/arm/mach-imx/imx31.c | 20 +-
arch/arm/mach-imx/imx35.c | 23 +-
arch/arm/mach-imx/imx51.c | 10 +-
arch/arm/mach-imx/include/mach/devices-imx1.h | 4 +-
arch/arm/mach-imx/include/mach/devices-imx21.h | 8 +-
arch/arm/mach-imx/include/mach/devices-imx25.h | 55 ++++-
arch/arm/mach-imx/include/mach/devices-imx27.h | 28 +--
arch/arm/mach-imx/include/mach/devices-imx31.h | 34 ++-
arch/arm/mach-imx/include/mach/devices-imx35.h | 34 ++-
arch/arm/mach-imx/include/mach/imx1-regs.h | 131 +++++------
arch/arm/mach-imx/include/mach/imx21-regs.h | 173 +++++++++------
arch/arm/mach-imx/include/mach/imx25-regs.h | 132 ++++++-----
arch/arm/mach-imx/include/mach/imx27-regs.h | 229 ++++++++++++--------
arch/arm/mach-imx/include/mach/imx31-regs.h | 217 ++++++++++---------
arch/arm/mach-imx/include/mach/imx35-regs.h | 170 ++++++++++-----
arch/arm/mach-imx/include/mach/weim.h | 20 ++
arch/arm/mach-imx/speed-imx25.c | 22 +-
arch/arm/mach-imx/speed-imx31.c | 8 +-
arch/arm/mach-imx/speed-imx35.c | 30 +--
arch/arm/mach-mxs/include/mach/imx23-regs.h | 7 -
arch/arm/mach-mxs/include/mach/imx28-regs.h | 7 -
55 files changed, 1282 insertions(+), 986 deletions(-)
create mode 100644 arch/arm/mach-imx/include/mach/weim.h
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-09-24 10:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-24 10:46 Sascha Hauer [this message]
2012-09-24 10:46 ` [PATCH 01/14] ARM i.MX31: give register base addresses a proper MX31_ prefix Sascha Hauer
2012-09-24 10:46 ` [PATCH 02/14] ARM i.MX35: give register base addresses a proper MX35_ prefix Sascha Hauer
2012-09-24 10:46 ` [PATCH 03/14] ARM i.MX21: give register base addresses a proper MX21_ prefix Sascha Hauer
2012-09-24 10:46 ` [PATCH 04/14] ARM i.MX1: give register base addresses a proper MX1_ prefix Sascha Hauer
2012-09-24 10:46 ` [PATCH 05/14] ARM i.MX27: give register base addresses a proper MX27_ prefix Sascha Hauer
2012-09-24 10:46 ` [PATCH 06/14] ARM i.MX25: give register base addresses a proper MX25_ prefix Sascha Hauer
2012-09-24 10:46 ` [PATCH 07/14] ARM i.MX/MXS: Allow to include imx*-regs.h directly Sascha Hauer
2012-09-24 10:46 ` [PATCH 08/14] ARM i.MX51: Use defines rather than hardcoded addresses Sascha Hauer
2012-09-24 10:46 ` [PATCH 09/14] ARM i.MX: Add header file for WEIM cs setup Sascha Hauer
2012-09-24 10:46 ` [PATCH 10/14] ARM i.MX1: Add function to setup chipselect Sascha Hauer
2012-09-24 10:46 ` [PATCH 11/14] ARM i.MX21: " Sascha Hauer
2012-09-24 10:46 ` [PATCH 12/14] ARM i.MX31: " Sascha Hauer
2012-09-24 10:46 ` [PATCH 13/14] ARM i.MX35: " Sascha Hauer
2012-09-24 10:46 ` [PATCH 14/14] ARM i.MX25: " Sascha Hauer
2012-09-24 12:04 ` Roberto Nibali
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348483583-12586-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox