From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/1 v2] arm: add generic smp twd timer
Date: Thu, 4 Oct 2012 12:55:35 +0200 [thread overview]
Message-ID: <1349348135-509-1-git-send-email-plagnioj@jcrosoft.com> (raw)
on Cortex A9 and Cortex A5 we have a generic timer which we can use as
clocksource
Limit the timer frequency to < 25Mhz
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
v2:
move to clocksource
drop header
Best Regards,
J.
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/clocksource/arm_smp_twd.c | 101 +++++++++++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
create mode 100644 drivers/clocksource/arm_smp_twd.c
diff --git a/drivers/Kconfig b/drivers/Kconfig
index d0b5e3a..6f78644 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -11,6 +11,7 @@ source "drivers/usb/Kconfig"
source "drivers/video/Kconfig"
source "drivers/mci/Kconfig"
source "drivers/clk/Kconfig"
+source "drivers/clocksource/Kconfig"
source "drivers/mfd/Kconfig"
source "drivers/misc/Kconfig"
source "drivers/led/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 2a1f8b0..742a5bd 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_I2C) += i2c/
obj-$(CONFIG_MCI) += mci/
obj-$(CONFIG_VIDEO) += video/
obj-y += clk/
+obj-y += clocksource/
obj-y += mfd/
obj-$(CONFIG_LED) += led/
obj-y += eeprom/
diff --git a/drivers/clocksource/arm_smp_twd.c b/drivers/clocksource/arm_smp_twd.c
new file mode 100644
index 0000000..746d566
--- /dev/null
+++ b/drivers/clocksource/arm_smp_twd.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPL v2
+ */
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <io.h>
+#include <driver.h>
+#include <errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#define TWD_TIMER_LOAD 0x00
+#define TWD_TIMER_COUNTER 0x04
+#define TWD_TIMER_CONTROL 0x08
+#define TWD_TIMER_INTSTAT 0x0C
+
+#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
+
+#define TWD_TIMER_CONTROL_PRESC(x) (((x) & 0xff) << 8)
+
+static __iomem void *twd_base;
+static struct clk *twd_clk;
+
+static uint64_t smp_twd_read(void)
+{
+ return ~readl(twd_base + TWD_TIMER_COUNTER);
+}
+
+static struct clocksource smp_twd_clksrc = {
+ .read = smp_twd_read,
+ .shift = 20,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+#define SMP_TWD_MAX_FREQ (25 *1000 * 1000)
+
+static int smp_twd_probe(struct device_d *dev)
+{
+ u32 tick_rate;
+ u32 val;
+ int ret;
+ u32 presc = 0;
+
+ twd_clk = clk_get(dev, NULL);
+ if (IS_ERR(twd_clk)) {
+ ret = PTR_ERR(twd_clk);
+ dev_err(dev, "clock not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(twd_clk);
+ if (ret < 0) {
+ dev_err(dev, "clock failed to enable: %d\n", ret);
+ clk_put(twd_clk);
+ return ret;
+ }
+
+ twd_base = dev_request_mem_region(dev, 0);
+
+ tick_rate = clk_get_rate(twd_clk);
+ if (tick_rate > SMP_TWD_MAX_FREQ) {
+ presc = tick_rate / SMP_TWD_MAX_FREQ;
+ if (presc)
+ presc--;
+ presc = min((u32)0xff, presc);
+ tick_rate /= presc + 1;
+ }
+
+ val = TWD_TIMER_CONTROL_PRESC(presc) |
+ TWD_TIMER_CONTROL_PERIODIC;
+ writel(val, twd_base + TWD_TIMER_CONTROL);
+
+ writel(0xffffffff, twd_base + TWD_TIMER_LOAD);
+
+ val = readl(twd_base + TWD_TIMER_CONTROL);
+ val |= TWD_TIMER_CONTROL_ENABLE;
+ writel(val, twd_base + TWD_TIMER_CONTROL);
+
+ smp_twd_clksrc.mult = clocksource_hz2mult(tick_rate, smp_twd_clksrc.shift);
+
+ init_clock(&smp_twd_clksrc);
+
+ return 0;
+}
+
+static struct driver_d smp_twd_driver = {
+ .name = "smp_twd",
+ .probe = smp_twd_probe,
+};
+
+static int smp_twd_init(void)
+{
+ return platform_driver_register(&smp_twd_driver);
+}
+coredevice_initcall(smp_twd_init);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-10-04 10:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 10:55 Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-10-04 11:06 ` Sascha Hauer
2012-10-04 12:05 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349348135-509-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox