From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] i.MX SoC work
Date: Fri, 5 Oct 2012 12:53:28 +0200 [thread overview]
Message-ID: <1349434416-4231-1-git-send-email-s.hauer@pengutronix.de> (raw)
This is some general i.MX work. The iomuxes are converted to drivers,
the silicon revision and bootsource settings are streamlined.
Sascha
----------------------------------------------------------------
Sascha Hauer (8):
ARM i.MX27: Use standard IMX_CHIP_REV_* defines
ARM i.MX: streamline imx_silicon_revision
ARM i.MX1: move iomux definitions to separate header file
ARM i.MX boards: Use IMX_GPIO_NR
ARM i.MX iomux-v1: Add separate header file
ARM i.MX: Turn iomux-v2 into driver
ARM i.MX: Turn iomux-v3 into driver
ARM i.MX: rework bootsource setting
arch/arm/boards/ccxmx51/ccxmx51.c | 1 +
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 1 +
arch/arm/boards/freescale-mx51-pdk/board.c | 1 +
arch/arm/boards/freescale-mx53-loco/board.c | 1 +
arch/arm/boards/freescale-mx6-sabrelite/board.c | 2 +-
arch/arm/boards/karo-tx25/board.c | 10 +-
arch/arm/boards/pcm038/pcm038.c | 8 +-
arch/arm/boards/scb9328/scb9328.c | 1 +
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/boot.c | 178 ++++++++++++++++-------
arch/arm/mach-imx/clk-imx27.c | 5 +-
arch/arm/mach-imx/imx.c | 27 ++++
arch/arm/mach-imx/imx1.c | 3 +
arch/arm/mach-imx/imx21.c | 11 +-
arch/arm/mach-imx/imx25.c | 7 +
arch/arm/mach-imx/imx27.c | 34 ++++-
arch/arm/mach-imx/imx31.c | 1 +
arch/arm/mach-imx/imx35.c | 14 +-
arch/arm/mach-imx/imx51.c | 83 +----------
arch/arm/mach-imx/imx53.c | 16 +-
arch/arm/mach-imx/imx6.c | 1 +
arch/arm/mach-imx/include/mach/generic.h | 21 ++-
arch/arm/mach-imx/include/mach/imx-regs.h | 55 -------
arch/arm/mach-imx/include/mach/imx1-regs.h | 130 -----------------
arch/arm/mach-imx/include/mach/imx27-regs.h | 10 --
arch/arm/mach-imx/include/mach/iomux-mx1.h | 133 +++++++++++++++++
arch/arm/mach-imx/include/mach/iomux-mx21.h | 1 +
arch/arm/mach-imx/include/mach/iomux-mx27.h | 1 +
arch/arm/mach-imx/include/mach/iomux-v1.h | 48 ++++++
arch/arm/mach-imx/include/mach/revision.h | 22 +++
arch/arm/mach-imx/iomux-v1.c | 123 ++++++++++------
arch/arm/mach-imx/iomux-v2.c | 66 +++++++--
arch/arm/mach-imx/iomux-v3.c | 42 +++++-
33 files changed, 639 insertions(+), 420 deletions(-)
create mode 100644 arch/arm/mach-imx/imx.c
create mode 100644 arch/arm/mach-imx/include/mach/iomux-mx1.h
create mode 100644 arch/arm/mach-imx/include/mach/iomux-v1.h
create mode 100644 arch/arm/mach-imx/include/mach/revision.h
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-10-05 10:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-05 10:53 Sascha Hauer [this message]
2012-10-05 10:53 ` [PATCH 1/8] ARM i.MX27: Use standard IMX_CHIP_REV_* defines Sascha Hauer
2012-10-05 10:53 ` [PATCH 2/8] ARM i.MX: streamline imx_silicon_revision Sascha Hauer
2012-10-05 10:53 ` [PATCH 3/8] ARM i.MX1: move iomux definitions to separate header file Sascha Hauer
2012-10-05 10:53 ` [PATCH 4/8] ARM i.MX boards: Use IMX_GPIO_NR Sascha Hauer
2012-10-05 10:53 ` [PATCH 5/8] ARM i.MX iomux-v1: Add separate header file Sascha Hauer
2012-10-05 10:53 ` [PATCH 6/8] ARM i.MX: Turn iomux-v2 into driver Sascha Hauer
2012-10-05 10:53 ` [PATCH 7/8] ARM i.MX: Turn iomux-v3 " Sascha Hauer
2012-10-05 10:53 ` [PATCH 8/8] ARM i.MX: rework bootsource setting Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349434416-4231-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox