From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/8] ARM i.MX27: Use standard IMX_CHIP_REV_* defines
Date: Fri, 5 Oct 2012 12:53:29 +0200 [thread overview]
Message-ID: <1349434416-4231-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1349434416-4231-1-git-send-email-s.hauer@pengutronix.de>
We have IMX_CHIP_REV_* defines which are used for most i.MX SoCs.
Use them for i.MX27 aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/clk-imx27.c | 4 ++--
arch/arm/mach-imx/imx27.c | 15 ++++++++++++++-
arch/arm/mach-imx/include/mach/generic.h | 2 --
arch/arm/mach-imx/include/mach/imx-regs.h | 1 +
4 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index abfde0f..74d70db 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -92,7 +92,7 @@ static int imx27_ccm_probe(struct device_d *dev)
clks[spll] = imx_clk_pllv1("spll", "ckih", base + CCM_SPCTL0);
clks[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
- if (imx_silicon_revision() >= IMX27_CHIP_REVISION_2_0) {
+ if (imx_silicon_revision() >= IMX_CHIP_REV_2_0) {
clks[ahb] = imx_clk_divider("ahb", "mpll_main2", base + CCM_CSCR, 8, 2);
clks[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
} else {
@@ -110,7 +110,7 @@ static int imx27_ccm_probe(struct device_d *dev)
ARRAY_SIZE(cpu_sel_clks));
clks[clko_sel] = imx_clk_mux("clko_sel", base + CCM_CCSR, 0, 5, clko_sel_clks,
ARRAY_SIZE(clko_sel_clks));
- if (imx_silicon_revision() >= IMX27_CHIP_REVISION_2_0)
+ if (imx_silicon_revision() >= IMX_CHIP_REV_2_0)
clks[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", base + CCM_CSCR, 12, 2);
else
clks[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", base + CCM_CSCR, 13, 3);
diff --git a/arch/arm/mach-imx/imx27.c b/arch/arm/mach-imx/imx27.c
index 8116e6f..cd429d0 100644
--- a/arch/arm/mach-imx/imx27.c
+++ b/arch/arm/mach-imx/imx27.c
@@ -20,7 +20,20 @@
int imx_silicon_revision(void)
{
- return CID >> 28;
+ uint32_t val;
+
+ val = readl(MX27_SYSCTRL_BASE_ADDR);
+
+ switch (val >> 28) {
+ case 0:
+ return IMX_CHIP_REV_1_0;
+ case 1:
+ return IMX_CHIP_REV_2_0;
+ case 2:
+ return IMX_CHIP_REV_2_1;
+ default:
+ return IMX_CHIP_REV_UNKNOWN;
+ }
}
void imx27_setup_weimcs(size_t cs, unsigned upper, unsigned lower,
diff --git a/arch/arm/mach-imx/include/mach/generic.h b/arch/arm/mach-imx/include/mach/generic.h
index 99f3012..018ea91 100644
--- a/arch/arm/mach-imx/include/mach/generic.h
+++ b/arch/arm/mach-imx/include/mach/generic.h
@@ -1,7 +1,5 @@
int imx_silicon_revision(void);
-#define IMX27_CHIP_REVISION_1_0 0
-#define IMX27_CHIP_REVISION_2_0 1
u64 imx_uid(void);
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
index 235bac3..2b836c9 100644
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx-regs.h
@@ -115,5 +115,6 @@
#define IMX_CHIP_REV_3_0 0x30
#define IMX_CHIP_REV_3_1 0x31
#define IMX_CHIP_REV_3_2 0x32
+#define IMX_CHIP_REV_UNKNOWN 0xff
#endif /* _IMX_REGS_H */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-10-05 10:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-05 10:53 [PATCH] i.MX SoC work Sascha Hauer
2012-10-05 10:53 ` Sascha Hauer [this message]
2012-10-05 10:53 ` [PATCH 2/8] ARM i.MX: streamline imx_silicon_revision Sascha Hauer
2012-10-05 10:53 ` [PATCH 3/8] ARM i.MX1: move iomux definitions to separate header file Sascha Hauer
2012-10-05 10:53 ` [PATCH 4/8] ARM i.MX boards: Use IMX_GPIO_NR Sascha Hauer
2012-10-05 10:53 ` [PATCH 5/8] ARM i.MX iomux-v1: Add separate header file Sascha Hauer
2012-10-05 10:53 ` [PATCH 6/8] ARM i.MX: Turn iomux-v2 into driver Sascha Hauer
2012-10-05 10:53 ` [PATCH 7/8] ARM i.MX: Turn iomux-v3 " Sascha Hauer
2012-10-05 10:53 ` [PATCH 8/8] ARM i.MX: rework bootsource setting Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349434416-4231-2-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox