From: Vicente <vicencb@gmail.com>
To: barebox@lists.infradead.org
Cc: Vicente <vicencb@gmail.com>
Subject: [PATCH 00/13] archosg9: add support for tablet, fourth round
Date: Mon, 8 Oct 2012 00:01:14 +0200 [thread overview]
Message-ID: <1349647287-28224-1-git-send-email-vicencb@gmail.com> (raw)
Hello,
here is the fourth round of patches including all of the modifications
suggested by your comments, which are greatly appreciated.
The change 29e4031b460d1c84c1a8fc276199d40680b354d4 "ARM OMAP: switch to
gpiolib support" breaks support for the tablet and it's reverted here only to
make this patch-list feature-complete.
Can somebody check if gpiolib works for other OMAP4460-based boards?
New things added in this series:
bootm: do not leave files open
uimage: improve transfer speed
fs: improve robustness
Regards,
Vicente.
Vicente (13):
twl6030: add debug info
omap4: add rename definitions to match datasheet
ARM: ensure irqs are disabled
omap: revert gpiolib
omap4: add usb boot source
bootm: close open files
uimage: improve transfer speed
fs: improve robustness
omap4: add support for booting cpu from usb
omap4: add serial communications over usb boot
omap4: add filesystem support over usb boot
omap4: add support for loading second stage from usb
Add support for Archos G9 tablet
Documentation/oamp4_usb_booting.txt | 27 ++
arch/arm/Kconfig | 1 -
arch/arm/Makefile | 1 +
arch/arm/boards/archosg9/Makefile | 3 +
arch/arm/boards/archosg9/board.c | 71 ++++
arch/arm/boards/archosg9/config.h | 1 +
arch/arm/boards/archosg9/env/config | 1 +
arch/arm/boards/archosg9/env/init/usbboot | 5 +
arch/arm/boards/archosg9/lowlevel.c | 79 ++++
arch/arm/boards/archosg9/mux.c | 459 ++++++++++++++++++++++++
arch/arm/boards/archosg9/mux.h | 6 +
arch/arm/boards/panda/mux.c | 52 +--
arch/arm/boards/pcm049/mux.c | 44 +--
arch/arm/boards/phycard-a-xl2/mux.c | 46 +--
arch/arm/configs/archosg9_defconfig | 70 ++++
arch/arm/configs/archosg9_xload_defconfig | 24 ++
arch/arm/cpu/cpu.c | 11 +
arch/arm/lib/bootm.c | 4 +-
arch/arm/mach-omap/Kconfig | 18 +
arch/arm/mach-omap/Makefile | 1 +
arch/arm/mach-omap/gpio.c | 170 +++++----
arch/arm/mach-omap/include/mach/omap4-mux.h | 80 +++--
arch/arm/mach-omap/include/mach/omap4-silicon.h | 13 +
arch/arm/mach-omap/include/mach/omap4_rom_usb.h | 141 ++++++++
arch/arm/mach-omap/include/mach/xload.h | 1 +
arch/arm/mach-omap/omap3_generic.c | 19 -
arch/arm/mach-omap/omap4_generic.c | 44 +--
arch/arm/mach-omap/omap4_rom_usb.c | 198 ++++++++++
arch/arm/mach-omap/xload.c | 26 ++
commands/bootm.c | 6 +-
common/uimage.c | 26 +-
drivers/mfd/twl6030.c | 21 ++
drivers/serial/Kconfig | 7 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_omap4_usbboot.c | 83 +++++
fs/Kconfig | 5 +
fs/Makefile | 1 +
fs/fs.c | 27 +-
fs/omap4_usbbootfs.c | 219 +++++++++++
include/mfd/twl6030.h | 8 +
scripts/.gitignore | 1 +
scripts/Makefile | 4 +
scripts/omap4_usbboot.c | 415 +++++++++++++++++++++
scripts/usb.h | 61 ++++
scripts/usb_linux.c | 397 ++++++++++++++++++++
45 files changed, 2663 insertions(+), 235 deletions(-)
create mode 100644 Documentation/oamp4_usb_booting.txt
create mode 100644 arch/arm/boards/archosg9/Makefile
create mode 100644 arch/arm/boards/archosg9/board.c
create mode 100644 arch/arm/boards/archosg9/config.h
create mode 100644 arch/arm/boards/archosg9/env/config
create mode 100644 arch/arm/boards/archosg9/env/init/usbboot
create mode 100644 arch/arm/boards/archosg9/lowlevel.c
create mode 100644 arch/arm/boards/archosg9/mux.c
create mode 100644 arch/arm/boards/archosg9/mux.h
create mode 100644 arch/arm/configs/archosg9_defconfig
create mode 100644 arch/arm/configs/archosg9_xload_defconfig
create mode 100644 arch/arm/mach-omap/include/mach/omap4_rom_usb.h
create mode 100644 arch/arm/mach-omap/omap4_rom_usb.c
create mode 100644 drivers/serial/serial_omap4_usbboot.c
create mode 100644 fs/omap4_usbbootfs.c
create mode 100644 scripts/omap4_usbboot.c
create mode 100644 scripts/usb.h
create mode 100644 scripts/usb_linux.c
--
1.7.12.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-10-07 22:01 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-07 22:01 Vicente [this message]
2012-10-07 22:01 ` [PATCH 01/13] twl6030: add debug info Vicente
2012-10-07 22:01 ` [PATCH 02/13] omap4: add rename definitions to match datasheet Vicente
2012-10-07 22:01 ` [PATCH 03/13] ARM: ensure irqs are disabled Vicente
2012-10-08 20:21 ` Sascha Hauer
2012-10-07 22:01 ` [PATCH 04/13] omap: revert gpiolib Vicente
2012-10-07 22:01 ` [PATCH 05/13] omap4: add usb boot source Vicente
2012-10-07 22:01 ` [PATCH 06/13] bootm: close open files Vicente
2012-10-08 20:18 ` Sascha Hauer
2012-10-08 21:02 ` vj
2012-10-07 22:01 ` [PATCH 07/13] uimage: improve transfer speed Vicente
2012-10-08 20:01 ` Sascha Hauer
2012-10-08 20:48 ` vj
2012-10-07 22:01 ` [PATCH 08/13] fs: improve robustness Vicente
2012-10-07 22:01 ` [PATCH 09/13] omap4: add support for booting cpu from usb Vicente
2012-10-07 22:01 ` [PATCH 10/13] omap4: add serial communications over usb boot Vicente
2012-10-07 22:01 ` [PATCH 11/13] omap4: add filesystem support " Vicente
2012-10-07 22:01 ` [PATCH 12/13] omap4: add support for loading second stage from usb Vicente
2012-10-07 22:01 ` [PATCH 13/13] Add support for Archos G9 tablet Vicente
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349647287-28224-1-git-send-email-vicencb@gmail.com \
--to=vicencb@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox