* [PATCH 0/5] BCM2835/Raspberry-Pi support
@ 2012-10-13 14:00 Carlo Caione
2012-10-13 14:00 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
` (5 more replies)
0 siblings, 6 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-13 14:00 UTC (permalink / raw)
To: barebox
The set is the same as before except for patch 05/05
Carlo Caione (5):
BCM2835: add clocksource driver
BCM2835: add gpio driver
ARM1176: add support
BCM2835: add support (arch)
Raspberry-Pi: add support (board)
arch/arm/Kconfig | 9 ++
arch/arm/Makefile | 2 +
arch/arm/boards/raspberry-pi/Makefile | 1 +
arch/arm/boards/raspberry-pi/config.h | 4 +
.../arm/boards/raspberry-pi/env/init/bootargs-base | 8 +
arch/arm/boards/raspberry-pi/env/init/hostname | 8 +
arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++
arch/arm/configs/rpi_defconfig | 40 +++++
arch/arm/cpu/Kconfig | 5 +
arch/arm/mach-bcm2835/Kconfig | 18 +++
arch/arm/mach-bcm2835/Makefile | 2 +
arch/arm/mach-bcm2835/clock.c | 39 +++++
arch/arm/mach-bcm2835/core.c | 105 +++++++++++++
arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 +
arch/arm/mach-bcm2835/include/mach/clock.h | 8 +
arch/arm/mach-bcm2835/include/mach/core.h | 27 ++++
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++
arch/arm/mach-bcm2835/include/mach/wd.h | 50 +++++++
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/bcm2835.c | 95 ++++++++++++
drivers/gpio/Kconfig | 4 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bcm2835.c | 165 +++++++++++++++++++++
25 files changed, 706 insertions(+)
create mode 100644 arch/arm/boards/raspberry-pi/Makefile
create mode 100644 arch/arm/boards/raspberry-pi/config.h
create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
create mode 100644 arch/arm/configs/rpi_defconfig
create mode 100644 arch/arm/mach-bcm2835/Kconfig
create mode 100644 arch/arm/mach-bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm2835/clock.c
create mode 100644 arch/arm/mach-bcm2835/core.c
create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
create mode 100644 drivers/clocksource/bcm2835.c
create mode 100644 drivers/gpio/gpio-bcm2835.c
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/5] BCM2835: add clocksource driver
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
@ 2012-10-13 14:00 ` Carlo Caione
2012-10-13 14:00 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
` (4 subsequent siblings)
5 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-13 14:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
drivers/clocksource/Kconfig | 4 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/bcm2835.c | 95 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+)
create mode 100644 drivers/clocksource/bcm2835.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 9d6d293..09acdd7 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -2,6 +2,10 @@ config ARM_SMP_TWD
bool
depends on ARM && CPU_V7
+config CLOCKSOURCE_BCM2835
+ bool
+ depends on ARCH_BCM2835
+
config CLOCKSOURCE_NOMADIK
bool
depends on ARM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index bef465c..92d7c13 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_ARM_SMP_TWD) += arm_smp_twd.o
+obj-$(CONFIG_CLOCKSOURCE_BCM2835) += bcm2835.o
obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
diff --git a/drivers/clocksource/bcm2835.c b/drivers/clocksource/bcm2835.c
new file mode 100644
index 0000000..78f0cae
--- /dev/null
+++ b/drivers/clocksource/bcm2835.c
@@ -0,0 +1,95 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on clocksource for nomadik
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+
+#include <common.h>
+#include <clock.h>
+#include <io.h>
+#include <init.h>
+#include <driver.h>
+#include <errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+/* Registers */
+#define ST_CLO 0x04
+
+static __iomem void *stc_base;
+
+static uint64_t stc_read_cycles(void)
+{
+ return readl(stc_base + ST_CLO);
+}
+
+static struct clocksource bcm2835_stc = {
+ .read = stc_read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+static int bcm2835_cs_probe(struct device_d *dev)
+{
+ static struct clk *stc_clk;
+ u32 rate;
+ int ret;
+
+ stc_clk = clk_get(dev, NULL);
+ if (IS_ERR(stc_clk)) {
+ ret = PTR_ERR(stc_clk);
+ dev_err(dev, "clock not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(stc_clk);
+ if (ret) {
+ dev_err(dev, "clock failed to enable: %d\n", ret);
+ clk_put(stc_clk);
+ return ret;
+ }
+
+ rate = clk_get_rate(stc_clk);
+ stc_base = dev_request_mem_region(dev, 0);
+
+ clocks_calc_mult_shift(&bcm2835_stc.mult, &bcm2835_stc.shift, rate, NSEC_PER_SEC, 60);
+ init_clock(&bcm2835_stc);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id bcm2835_cs_dt_ids[] = {
+ {
+ .compatible = "bcm,bcm2835-cs",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d bcm2835_cs_driver = {
+ .name = "bcm2835-cs",
+ .probe = bcm2835_cs_probe,
+ .of_compatible = DRV_OF_COMPAT(bcm2835_cs_dt_ids),
+};
+
+static int bcm2835_cs_init(void)
+{
+ return platform_driver_register(&bcm2835_cs_driver);
+}
+coredevice_initcall(bcm2835_cs_init);
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/5] BCM2835: add gpio driver
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-13 14:00 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
@ 2012-10-13 14:00 ` Carlo Caione
2012-10-13 14:00 ` [PATCH 3/5] ARM1176: add support Carlo Caione
` (3 subsequent siblings)
5 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-13 14:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
drivers/gpio/Kconfig | 4 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-bcm2835.c | 165 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 170 insertions(+)
create mode 100644 drivers/gpio/gpio-bcm2835.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a0e9b58..e8eeb6d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -6,6 +6,10 @@ if GPIOLIB
menu "GPIO "
+config GPIO_BCM2835
+ bool "GPIO support for BCM2835"
+ depends on ARCH_BCM2835
+
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index e2e97d3..aecdf24 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_GPIOLIB) += gpio.o
+obj-$(CONFIG_GPIO_BCM2835) += gpio-bcm2835.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
diff --git a/drivers/gpio/gpio-bcm2835.c b/drivers/gpio/gpio-bcm2835.c
new file mode 100644
index 0000000..2a9bc59
--- /dev/null
+++ b/drivers/gpio/gpio-bcm2835.c
@@ -0,0 +1,165 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <io.h>
+#include <gpio.h>
+#include <init.h>
+#include <mach/platform.h>
+
+#define GPIOFSEL(x) (0x00+(x)*4)
+#define GPIOSET(x) (0x1c+(x)*4)
+#define GPIOCLR(x) (0x28+(x)*4)
+#define GPIOLEV(x) (0x34+(x)*4)
+#define GPIOEDS(x) (0x40+(x)*4)
+#define GPIOREN(x) (0x4c+(x)*4)
+#define GPIOFEN(x) (0x58+(x)*4)
+#define GPIOHEN(x) (0x64+(x)*4)
+#define GPIOLEN(x) (0x70+(x)*4)
+#define GPIOAREN(x) (0x7c+(x)*4)
+#define GPIOAFEN(x) (0x88+(x)*4)
+#define GPIOUD(x) (0x94+(x)*4)
+#define GPIOUDCLK(x) (0x98+(x)*4)
+
+enum {
+ GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
+ GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
+ GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
+ GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
+};
+
+struct bcm2835_gpio_chip {
+ void __iomem *base;
+ struct gpio_chip chip;
+};
+
+static int bcm2835_set_function(struct gpio_chip *chip, unsigned gpio, int function)
+{
+ struct bcm2835_gpio_chip *bcmgpio = container_of(chip, struct bcm2835_gpio_chip, chip);
+ void __iomem *base = bcmgpio->base;
+ unsigned gpiodir;
+ unsigned gpio_bank = gpio / 10;
+ unsigned gpio_field_offset = (gpio - 10 * gpio_bank) * 3;
+
+ gpiodir = readl(base + GPIOFSEL(gpio_bank));
+ gpiodir &= ~(7 << gpio_field_offset);
+ gpiodir |= function << gpio_field_offset;
+ writel(gpiodir, base + GPIOFSEL(gpio_bank));
+ gpiodir = readl(base + GPIOFSEL(gpio_bank));
+
+ return 0;
+}
+
+static void bcm2835_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ struct bcm2835_gpio_chip *bcmgpio = container_of(chip, struct bcm2835_gpio_chip, chip);
+ void __iomem *base = bcmgpio->base;
+ unsigned gpio_bank = gpio / 32;
+ unsigned gpio_field_offset = gpio % 32;
+
+ if (value)
+ writel(1 << gpio_field_offset, base + GPIOSET(gpio_bank));
+ else
+ writel(1 << gpio_field_offset, base + GPIOCLR(gpio_bank));
+}
+
+static int bcm2835_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ struct bcm2835_gpio_chip *bcmgpio = container_of(chip, struct bcm2835_gpio_chip, chip);
+ void __iomem *base = bcmgpio->base;
+ unsigned gpio_bank = gpio / 32;
+ unsigned gpio_field_offset = gpio % 32;
+ unsigned lev;
+
+ lev = readl(base + GPIOLEV(gpio_bank));
+ return 0x1 & (lev >> gpio_field_offset);
+}
+
+static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ return bcm2835_set_function(chip, gpio, GPIO_FSEL_INPUT);
+}
+
+static int bcm2835_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ bcm2835_set_function(chip, gpio, GPIO_FSEL_OUTPUT);
+ bcm2835_gpio_set_value(chip, gpio, value);
+
+ return 0;
+}
+
+static struct gpio_ops bcm2835_gpio_ops = {
+ .direction_input = bcm2835_gpio_direction_input,
+ .direction_output = bcm2835_gpio_direction_output,
+ .get = bcm2835_gpio_get_value,
+ .set = bcm2835_gpio_set_value,
+};
+
+static int bcm2835_gpio_probe(struct device_d *dev)
+{
+ struct bcm2835_gpio_chip *bcmgpio;
+ int ret;
+
+ bcmgpio = xzalloc(sizeof(*bcmgpio));
+ bcmgpio->base = dev_request_mem_region(dev, 0);
+ bcmgpio->chip.ops = &bcm2835_gpio_ops;
+ bcmgpio->chip.base = -1;
+ bcmgpio->chip.ngpio = 54;
+ bcmgpio->chip.dev = dev;
+
+ ret = gpiochip_add(&bcmgpio->chip);
+ if (ret) {
+ dev_err(dev, "couldn't add gpiochip, ret = %d\n", ret);
+ goto err;
+ }
+ dev_info(dev, "probed gpiochip%d with base %d\n", dev->id, bcmgpio->chip.base);
+
+ return 0;
+
+err:
+ kfree(bcmgpio);
+
+ return ret;
+}
+
+static __maybe_unused struct of_device_id bcm2835_gpio_dt_ids[] = {
+ {
+ .compatible = "bcm,bcm2835-gpio",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d bcm2835_gpio_driver = {
+ .name = "bcm2835-gpio",
+ .probe = bcm2835_gpio_probe,
+ .of_compatible = DRV_OF_COMPAT(bcm2835_gpio_dt_ids),
+};
+
+static int bcm2835_gpio_add(void)
+{
+ platform_driver_register(&bcm2835_gpio_driver);
+ return 0;
+}
+coredevice_initcall(bcm2835_gpio_add);
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/5] ARM1176: add support
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-13 14:00 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
2012-10-13 14:00 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
@ 2012-10-13 14:00 ` Carlo Caione
2012-10-13 14:00 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
` (2 subsequent siblings)
5 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-13 14:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/cpu/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
index 2ed6789..d8a5fb1 100644
--- a/arch/arm/cpu/Kconfig
+++ b/arch/arm/cpu/Kconfig
@@ -8,6 +8,11 @@ config CPU_32
# which CPUs we support in the kernel image, and the compiler instruction
# optimiser behaviour.
+# ARM1176
+config CPU_ARM1176
+ bool
+ select CPU_V6
+
# ARM920T
config CPU_ARM920T
bool
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 4/5] BCM2835: add support (arch)
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
` (2 preceding siblings ...)
2012-10-13 14:00 ` [PATCH 3/5] ARM1176: add support Carlo Caione
@ 2012-10-13 14:00 ` Carlo Caione
2012-10-13 14:00 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
2012-10-15 6:56 ` [PATCH 0/5] BCM2835/Raspberry-Pi support Sascha Hauer
5 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-13 14:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Kconfig | 9 +++
arch/arm/Makefile | 1 +
arch/arm/mach-bcm2835/Kconfig | 3 +
arch/arm/mach-bcm2835/Makefile | 2 +
arch/arm/mach-bcm2835/clock.c | 39 ++++++++++
arch/arm/mach-bcm2835/core.c | 105 ++++++++++++++++++++++++++
arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 ++
arch/arm/mach-bcm2835/include/mach/clock.h | 8 ++
arch/arm/mach-bcm2835/include/mach/core.h | 27 +++++++
arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++++++++
arch/arm/mach-bcm2835/include/mach/wd.h | 50 ++++++++++++
12 files changed, 305 insertions(+)
create mode 100644 arch/arm/mach-bcm2835/Kconfig
create mode 100644 arch/arm/mach-bcm2835/Makefile
create mode 100644 arch/arm/mach-bcm2835/clock.c
create mode 100644 arch/arm/mach-bcm2835/core.c
create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ffeb4bf..de78b65 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -31,6 +31,14 @@ config ARCH_AT91
select HAS_DEBUG_LL
select HAVE_MACH_ARM_HEAD
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 boards"
+ select GPIOLIB
+ select CPU_ARM1176
+ select CLKDEV_LOOKUP
+ select CLOCKSOURCE_BCM2835
+ select ARM_AMBA
+
config ARCH_EP93XX
bool "Cirrus Logic EP93xx"
select CPU_ARM920T
@@ -102,6 +110,7 @@ endchoice
source arch/arm/cpu/Kconfig
source arch/arm/mach-at91/Kconfig
+source arch/arm/mach-bcm2835/Kconfig
source arch/arm/mach-ep93xx/Kconfig
source arch/arm/mach-imx/Kconfig
source arch/arm/mach-mxs/Kconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index de570d7..3449fd7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2)
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_BCM2835) := bcm2835
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
new file mode 100644
index 0000000..c42fe1c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -0,0 +1,3 @@
+if ARCH_BCM2835
+
+endif
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
new file mode 100644
index 0000000..f0aa2e0
--- /dev/null
+++ b/arch/arm/mach-bcm2835/Makefile
@@ -0,0 +1,2 @@
+obj-y += core.o
+obj-y += clock.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcm2835/clock.c b/arch/arm/mach-bcm2835/clock.c
new file mode 100644
index 0000000..31400ea
--- /dev/null
+++ b/arch/arm/mach-bcm2835/clock.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 Alessandro Rubini
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <mach/clock.h>
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-bcm2835/core.c b/arch/arm/mach-bcm2835/core.c
new file mode 100644
index 0000000..4c1bf28
--- /dev/null
+++ b/arch/arm/mach-bcm2835/core.c
@@ -0,0 +1,105 @@
+/*
+ * Author: Carlo Caione <carlo@carlocaione.org>
+ *
+ * Based on mach-nomadik
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <io.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/armlinux.h>
+#include <sizes.h>
+
+#include <mach/platform.h>
+#include <mach/wd.h>
+#include <mach/core.h>
+#include <mach/clock.h>
+#include <linux/amba/bus.h>
+
+static struct clk ref_3_clk = {
+ .rate = 3 * 1000 * 1000,
+};
+
+static struct clk ref_1_clk = {
+ .rate = 1 * 1000 * 1000,
+};
+
+static struct clk bcm2835_dummy;
+
+void bcm2835_add_device_sdram(u32 size)
+{
+ if (!size)
+ size = get_ram_size((ulong *) BCM2835_SDRAM_BASE, SZ_128M);
+
+ arm_add_mem_device("ram0", BCM2835_SDRAM_BASE, size);
+}
+
+static struct clk_lookup clocks_lookups[] = {
+ CLKDEV_CON_ID("apb_pclk", &bcm2835_dummy),
+ CLKDEV_DEV_ID("bcm2835-cs", &ref_1_clk),
+ CLKDEV_DEV_ID("uart0-pl0110", &ref_3_clk),
+};
+
+static int bcm2835_gpio_init(void)
+{
+ add_generic_device("bcm2835-gpio", 0, NULL, BCM2835_GPIO_BASE, 0xB0, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_gpio_init);
+
+static int bcm2835_clkdev_init(void)
+{
+ clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
+ return 0;
+}
+postcore_initcall(bcm2835_clkdev_init);
+
+static int bcm2835_clocksource_init(void)
+{
+ add_generic_device("bcm2835-cs", DEVICE_ID_SINGLE, NULL, BCM2835_ST_BASE, 0x1C, IORESOURCE_MEM, NULL);
+ return 0;
+}
+coredevice_initcall(bcm2835_clocksource_init);
+
+void bcm2835_register_uart(void)
+{
+ amba_apb_device_add(NULL, "uart0-pl011", 0, BCM2835_UART0_BASE, 4096, NULL, 0);
+}
+
+#define RESET_TIMEOUT 10
+
+void __noreturn reset_cpu (unsigned long addr)
+{
+ uint32_t rstc;
+
+ rstc = readl(PM_RSTC);
+ rstc &= ~PM_RSTC_WRCFG_SET;
+ rstc |= PM_RSTC_WRCFG_FULL_RESET;
+ writel(PM_PASSWORD | RESET_TIMEOUT, PM_WDOG);
+ writel(PM_PASSWORD | rstc, PM_RSTC);
+}
+EXPORT_SYMBOL(reset_cpu);
diff --git a/arch/arm/mach-bcm2835/include/mach/clkdev.h b/arch/arm/mach-bcm2835/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/clock.h b/arch/arm/mach-bcm2835/include/mach/clock.h
new file mode 100644
index 0000000..0550bf1
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/clock.h
@@ -0,0 +1,8 @@
+#ifndef _BCM2835_CLOCK_H
+#define _BCM2835_CLOCK_H
+
+struct clk {
+ unsigned long rate;
+};
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/core.h b/arch/arm/mach-bcm2835/include/mach/core.h
new file mode 100644
index 0000000..e60d947
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/core.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __BCM2835_CORE_H__
+#define __BCM2835_CORE_H__
+
+void bcm2835_register_uart(void);
+void bcm2835_add_device_sdram(u32 size);
+
+#endif
diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h b/arch/arm/mach-bcm2835/include/mach/gpio.h
new file mode 100644
index 0000000..306ab4c
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/gpio.h
@@ -0,0 +1 @@
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h b/arch/arm/mach-bcm2835/include/mach/platform.h
new file mode 100644
index 0000000..a058ec5
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/platform.h
@@ -0,0 +1,53 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _BCM2835_PLATFORM_H
+#define _BCM2835_PLATFORM_H
+
+/*
+ * SDRAM
+ */
+#define BCM2835_SDRAM_BASE 0x00000000
+
+/*
+ * Definitions and addresses for the ARM CONTROL logic
+ * This file is manually generated.
+ */
+
+#define BCM2835_PERI_BASE 0x20000000
+#define BCM2835_ST_BASE (BCM2835_PERI_BASE + 0x3000) /* System Timer */
+#define BCM2835_DMA_BASE (BCM2835_PERI_BASE + 0x7000) /* DMA controller */
+#define BCM2835_ARM_BASE (BCM2835_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
+#define BCM2835_PM_BASE (BCM2835_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
+#define BCM2835_GPIO_BASE (BCM2835_PERI_BASE + 0x200000) /* GPIO */
+#define BCM2835_UART0_BASE (BCM2835_PERI_BASE + 0x201000) /* Uart 0 */
+#define BCM2835_MMCI0_BASE (BCM2835_PERI_BASE + 0x202000) /* MMC interface */
+#define BCM2835_SPI0_BASE (BCM2835_PERI_BASE + 0x204000) /* SPI0 */
+#define BCM2835_BSC0_BASE (BCM2835_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
+#define BCM2835_UART1_BASE (BCM2835_PERI_BASE + 0x215000) /* Uart 1 */
+#define BCM2835_EMMC_BASE (BCM2835_PERI_BASE + 0x300000) /* eMMC interface */
+#define BCM2835_SMI_BASE (BCM2835_PERI_BASE + 0x600000) /* SMI */
+#define BCM2835_BSC1_BASE (BCM2835_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
+#define BCM2835_USB_BASE (BCM2835_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
+#define BCM2835_MCORE_BASE (BCM2835_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/
+
+#endif
+
+/* END */
diff --git a/arch/arm/mach-bcm2835/include/mach/wd.h b/arch/arm/mach-bcm2835/include/mach/wd.h
new file mode 100644
index 0000000..8046734
--- /dev/null
+++ b/arch/arm/mach-bcm2835/include/mach/wd.h
@@ -0,0 +1,50 @@
+/*
+ * Extract from arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _WD_H
+#define _WD_H
+
+/*
+ * Watchdog
+ */
+#define PM_RSTC (BCM2835_PM_BASE+0x1c)
+#define PM_RSTS (BCM2835_PM_BASE+0x20)
+#define PM_WDOG (BCM2835_PM_BASE+0x24)
+
+#define PM_WDOG_RESET 0000000000
+#define PM_PASSWORD 0x5a000000
+#define PM_WDOG_TIME_SET 0x000fffff
+#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTC_WRCFG_SET 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTC_RESET 0x00000102
+
+#define PM_RSTS_HADPOR_SET 0x00001000
+#define PM_RSTS_HADSRH_SET 0x00000400
+#define PM_RSTS_HADSRF_SET 0x00000200
+#define PM_RSTS_HADSRQ_SET 0x00000100
+#define PM_RSTS_HADWRH_SET 0x00000040
+#define PM_RSTS_HADWRF_SET 0x00000020
+#define PM_RSTS_HADWRQ_SET 0x00000010
+#define PM_RSTS_HADDRH_SET 0x00000004
+#define PM_RSTS_HADDRF_SET 0x00000002
+#define PM_RSTS_HADDRQ_SET 0x00000001
+
+#endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 5/5] Raspberry-Pi: add support (board)
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
` (3 preceding siblings ...)
2012-10-13 14:00 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
@ 2012-10-13 14:00 ` Carlo Caione
2012-10-15 6:56 ` [PATCH 0/5] BCM2835/Raspberry-Pi support Sascha Hauer
5 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-13 14:00 UTC (permalink / raw)
To: barebox
Tested-By: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/raspberry-pi/Makefile | 1 +
arch/arm/boards/raspberry-pi/config.h | 4 ++
.../arm/boards/raspberry-pi/env/init/bootargs-base | 8 ++++
arch/arm/boards/raspberry-pi/env/init/hostname | 8 ++++
arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++++++++++++++++++
arch/arm/configs/rpi_defconfig | 40 ++++++++++++++++++
arch/arm/mach-bcm2835/Kconfig | 15 +++++++
8 files changed, 126 insertions(+)
create mode 100644 arch/arm/boards/raspberry-pi/Makefile
create mode 100644 arch/arm/boards/raspberry-pi/config.h
create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
create mode 100644 arch/arm/configs/rpi_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3449fd7..ec9898c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -114,6 +114,7 @@ board-$(CONFIG_MACH_PCM043) := pcm043
board-$(CONFIG_MACH_PM9261) := pm9261
board-$(CONFIG_MACH_PM9263) := pm9263
board-$(CONFIG_MACH_PM9G45) := pm9g45
+board-$(CONFIG_MACH_RPI) := raspberry-pi
board-$(CONFIG_MACH_SCB9328) := scb9328
board-$(CONFIG_MACH_NESO) := guf-neso
board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
new file mode 100644
index 0000000..6ce5ede
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_RPI) += rpi.o
diff --git a/arch/arm/boards/raspberry-pi/config.h b/arch/arm/boards/raspberry-pi/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/raspberry-pi/env/init/bootargs-base b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
new file mode 100644
index 0000000..d869754
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Base bootargs"
+ exit
+fi
+
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/raspberry-pi/env/init/hostname b/arch/arm/boards/raspberry-pi/env/init/hostname
new file mode 100644
index 0000000..7e8f294
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/hostname
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "hostname"
+ exit
+fi
+
+global.hostname=Raspberry-Pi
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
new file mode 100644
index 0000000..6c94dcd
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+
+#include <mach/core.h>
+
+static int rpi_mem_init(void)
+{
+ bcm2835_add_device_sdram(0);
+ return 0;
+}
+mem_initcall(rpi_mem_init);
+
+static int rpi_console_init(void)
+{
+ bcm2835_register_uart();
+ return 0;
+}
+console_initcall(rpi_console_init);
+
+static int rpi_devices_init(void)
+{
+ armlinux_set_architecture(MACH_TYPE_BCM2708);
+ armlinux_set_bootparams((void *)(0x00000100));
+ return 0;
+}
+
+device_initcall(rpi_devices_init);
diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
new file mode 100644
index 0000000..bca3d25
--- /dev/null
+++ b/arch/arm/configs/rpi_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARCH_BCM2835=y
+CONFIG_GPIO_BCM2835=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="R-Pi> "
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_GPIO=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index c42fe1c..9d97aea 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -1,3 +1,18 @@
if ARCH_BCM2835
+config ARCH_TEXT_BASE
+ hex
+ default 0x04000000 if MACH_RPI
+
+config BOARDINFO
+ default "RaspberryPi (BCM2835/ARM1176JZF-S)" if MACH_RPI
+
+choice
+ prompt "Broadcom Board type"
+
+config MACH_RPI
+ bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
+
+endchoice
+
endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/5] BCM2835/Raspberry-Pi support
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
` (4 preceding siblings ...)
2012-10-13 14:00 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
@ 2012-10-15 6:56 ` Sascha Hauer
2012-10-15 12:43 ` Jean-Christophe PLAGNIOL-VILLARD
5 siblings, 1 reply; 13+ messages in thread
From: Sascha Hauer @ 2012-10-15 6:56 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
Jean-Christophe,
Since you reviewed this series can I assume you give your Acked-by once
you are happy with it?
Sascha
On Sat, Oct 13, 2012 at 04:00:11PM +0200, Carlo Caione wrote:
> The set is the same as before except for patch 05/05
>
> Carlo Caione (5):
> BCM2835: add clocksource driver
> BCM2835: add gpio driver
> ARM1176: add support
> BCM2835: add support (arch)
> Raspberry-Pi: add support (board)
>
> arch/arm/Kconfig | 9 ++
> arch/arm/Makefile | 2 +
> arch/arm/boards/raspberry-pi/Makefile | 1 +
> arch/arm/boards/raspberry-pi/config.h | 4 +
> .../arm/boards/raspberry-pi/env/init/bootargs-base | 8 +
> arch/arm/boards/raspberry-pi/env/init/hostname | 8 +
> arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++
> arch/arm/configs/rpi_defconfig | 40 +++++
> arch/arm/cpu/Kconfig | 5 +
> arch/arm/mach-bcm2835/Kconfig | 18 +++
> arch/arm/mach-bcm2835/Makefile | 2 +
> arch/arm/mach-bcm2835/clock.c | 39 +++++
> arch/arm/mach-bcm2835/core.c | 105 +++++++++++++
> arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 +
> arch/arm/mach-bcm2835/include/mach/clock.h | 8 +
> arch/arm/mach-bcm2835/include/mach/core.h | 27 ++++
> arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
> arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++
> arch/arm/mach-bcm2835/include/mach/wd.h | 50 +++++++
> drivers/clocksource/Kconfig | 4 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/bcm2835.c | 95 ++++++++++++
> drivers/gpio/Kconfig | 4 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-bcm2835.c | 165 +++++++++++++++++++++
> 25 files changed, 706 insertions(+)
> create mode 100644 arch/arm/boards/raspberry-pi/Makefile
> create mode 100644 arch/arm/boards/raspberry-pi/config.h
> create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
> create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
> create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
> create mode 100644 arch/arm/configs/rpi_defconfig
> create mode 100644 arch/arm/mach-bcm2835/Kconfig
> create mode 100644 arch/arm/mach-bcm2835/Makefile
> create mode 100644 arch/arm/mach-bcm2835/clock.c
> create mode 100644 arch/arm/mach-bcm2835/core.c
> create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
> create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
> create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
> create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
> create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
> create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
> create mode 100644 drivers/clocksource/bcm2835.c
> create mode 100644 drivers/gpio/gpio-bcm2835.c
>
> --
> 1.7.12.3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/5] BCM2835/Raspberry-Pi support
2012-10-15 6:56 ` [PATCH 0/5] BCM2835/Raspberry-Pi support Sascha Hauer
@ 2012-10-15 12:43 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-15 14:20 ` Carlo Caione
0 siblings, 1 reply; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-15 12:43 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
On 08:56 Mon 15 Oct , Sascha Hauer wrote:
>
> Jean-Christophe,
>
> Since you reviewed this series can I assume you give your Acked-by once
> you are happy with it?
I'm happy with it except one point that I just check with the mainline kernel
the DT
the timer as example is "brcm,bcm2835-system-timer" not "brcm,bcm2835-cs"
for gpio it's the right one
as we can agree to dt must be in sync
Best Regards,
J.
>
> Sascha
>
> On Sat, Oct 13, 2012 at 04:00:11PM +0200, Carlo Caione wrote:
> > The set is the same as before except for patch 05/05
> >
> > Carlo Caione (5):
> > BCM2835: add clocksource driver
> > BCM2835: add gpio driver
> > ARM1176: add support
> > BCM2835: add support (arch)
> > Raspberry-Pi: add support (board)
> >
> > arch/arm/Kconfig | 9 ++
> > arch/arm/Makefile | 2 +
> > arch/arm/boards/raspberry-pi/Makefile | 1 +
> > arch/arm/boards/raspberry-pi/config.h | 4 +
> > .../arm/boards/raspberry-pi/env/init/bootargs-base | 8 +
> > arch/arm/boards/raspberry-pi/env/init/hostname | 8 +
> > arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++
> > arch/arm/configs/rpi_defconfig | 40 +++++
> > arch/arm/cpu/Kconfig | 5 +
> > arch/arm/mach-bcm2835/Kconfig | 18 +++
> > arch/arm/mach-bcm2835/Makefile | 2 +
> > arch/arm/mach-bcm2835/clock.c | 39 +++++
> > arch/arm/mach-bcm2835/core.c | 105 +++++++++++++
> > arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 +
> > arch/arm/mach-bcm2835/include/mach/clock.h | 8 +
> > arch/arm/mach-bcm2835/include/mach/core.h | 27 ++++
> > arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
> > arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++
> > arch/arm/mach-bcm2835/include/mach/wd.h | 50 +++++++
> > drivers/clocksource/Kconfig | 4 +
> > drivers/clocksource/Makefile | 1 +
> > drivers/clocksource/bcm2835.c | 95 ++++++++++++
> > drivers/gpio/Kconfig | 4 +
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/gpio-bcm2835.c | 165 +++++++++++++++++++++
> > 25 files changed, 706 insertions(+)
> > create mode 100644 arch/arm/boards/raspberry-pi/Makefile
> > create mode 100644 arch/arm/boards/raspberry-pi/config.h
> > create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
> > create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
> > create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
> > create mode 100644 arch/arm/configs/rpi_defconfig
> > create mode 100644 arch/arm/mach-bcm2835/Kconfig
> > create mode 100644 arch/arm/mach-bcm2835/Makefile
> > create mode 100644 arch/arm/mach-bcm2835/clock.c
> > create mode 100644 arch/arm/mach-bcm2835/core.c
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
> > create mode 100644 drivers/clocksource/bcm2835.c
> > create mode 100644 drivers/gpio/gpio-bcm2835.c
> >
> > --
> > 1.7.12.3
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 0/5] BCM2835/Raspberry-Pi support
2012-10-15 12:43 ` Jean-Christophe PLAGNIOL-VILLARD
@ 2012-10-15 14:20 ` Carlo Caione
0 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-15 14:20 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On 10/15/2012 02:43 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 08:56 Mon 15 Oct , Sascha Hauer wrote:
>>
>> Jean-Christophe,
>>
>> Since you reviewed this series can I assume you give your Acked-by once
>> you are happy with it?
> I'm happy with it except one point that I just check with the mainline kernel
> the DT
>
> the timer as example is "brcm,bcm2835-system-timer" not "brcm,bcm2835-cs"
>
> for gpio it's the right one
>
> as we can agree to dt must be in sync
You are definitely right.
I'll resubmit the patches.
Thank you for your review, it is greatly appreciated.
Best,
--
Carlo Caione
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 5/5] Raspberry-Pi: add support (board)
2012-10-18 19:42 Carlo Caione
@ 2012-10-18 19:42 ` Carlo Caione
0 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-18 19:42 UTC (permalink / raw)
To: barebox
Tested-By: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/raspberry-pi/Makefile | 1 +
arch/arm/boards/raspberry-pi/config.h | 4 ++
.../arm/boards/raspberry-pi/env/init/bootargs-base | 8 ++++
arch/arm/boards/raspberry-pi/env/init/hostname | 8 ++++
arch/arm/boards/raspberry-pi/rpi.c | 44 ++++++++++++++++++++++
arch/arm/configs/rpi_defconfig | 41 ++++++++++++++++++++
arch/arm/mach-bcm2835/Kconfig | 15 ++++++++
8 files changed, 122 insertions(+)
create mode 100644 arch/arm/boards/raspberry-pi/Makefile
create mode 100644 arch/arm/boards/raspberry-pi/config.h
create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
create mode 100644 arch/arm/configs/rpi_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3449fd7..ec9898c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -114,6 +114,7 @@ board-$(CONFIG_MACH_PCM043) := pcm043
board-$(CONFIG_MACH_PM9261) := pm9261
board-$(CONFIG_MACH_PM9263) := pm9263
board-$(CONFIG_MACH_PM9G45) := pm9g45
+board-$(CONFIG_MACH_RPI) := raspberry-pi
board-$(CONFIG_MACH_SCB9328) := scb9328
board-$(CONFIG_MACH_NESO) := guf-neso
board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
new file mode 100644
index 0000000..6ce5ede
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_RPI) += rpi.o
diff --git a/arch/arm/boards/raspberry-pi/config.h b/arch/arm/boards/raspberry-pi/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/raspberry-pi/env/init/bootargs-base b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
new file mode 100644
index 0000000..d869754
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Base bootargs"
+ exit
+fi
+
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/raspberry-pi/env/init/hostname b/arch/arm/boards/raspberry-pi/env/init/hostname
new file mode 100644
index 0000000..7e8f294
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/hostname
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "hostname"
+ exit
+fi
+
+global.hostname=Raspberry-Pi
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
new file mode 100644
index 0000000..3be95ae
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+
+#include <mach/core.h>
+
+static int rpi_mem_init(void)
+{
+ bcm2835_add_device_sdram(0);
+ return 0;
+}
+mem_initcall(rpi_mem_init);
+
+static int rpi_console_init(void)
+{
+ bcm2835_register_uart();
+ return 0;
+}
+console_initcall(rpi_console_init);
+
+static int rpi_devices_init(void)
+{
+ armlinux_set_architecture(MACH_TYPE_BCM2708);
+ armlinux_set_bootparams((void *)(0x00000100));
+ return 0;
+}
+
+device_initcall(rpi_devices_init);
diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
new file mode 100644
index 0000000..014e28c
--- /dev/null
+++ b/arch/arm/configs/rpi_defconfig
@@ -0,0 +1,41 @@
+CONFIG_ARCH_BCM2835=y
+CONFIG_GPIO_BCM2835=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="R-Pi> "
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_GPIO=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index c42fe1c..9d97aea 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -1,3 +1,18 @@
if ARCH_BCM2835
+config ARCH_TEXT_BASE
+ hex
+ default 0x04000000 if MACH_RPI
+
+config BOARDINFO
+ default "RaspberryPi (BCM2835/ARM1176JZF-S)" if MACH_RPI
+
+choice
+ prompt "Broadcom Board type"
+
+config MACH_RPI
+ bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
+
+endchoice
+
endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 5/5] Raspberry-Pi: add support (board)
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
@ 2012-10-16 18:04 ` Carlo Caione
0 siblings, 0 replies; 13+ messages in thread
From: Carlo Caione @ 2012-10-16 18:04 UTC (permalink / raw)
To: barebox
Tested-By: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/raspberry-pi/Makefile | 1 +
arch/arm/boards/raspberry-pi/config.h | 4 ++
.../arm/boards/raspberry-pi/env/init/bootargs-base | 8 ++++
arch/arm/boards/raspberry-pi/env/init/hostname | 8 ++++
arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++++++++++++++++++
arch/arm/configs/rpi_defconfig | 40 ++++++++++++++++++
arch/arm/mach-bcm2835/Kconfig | 15 +++++++
8 files changed, 126 insertions(+)
create mode 100644 arch/arm/boards/raspberry-pi/Makefile
create mode 100644 arch/arm/boards/raspberry-pi/config.h
create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
create mode 100644 arch/arm/configs/rpi_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3449fd7..ec9898c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -114,6 +114,7 @@ board-$(CONFIG_MACH_PCM043) := pcm043
board-$(CONFIG_MACH_PM9261) := pm9261
board-$(CONFIG_MACH_PM9263) := pm9263
board-$(CONFIG_MACH_PM9G45) := pm9g45
+board-$(CONFIG_MACH_RPI) := raspberry-pi
board-$(CONFIG_MACH_SCB9328) := scb9328
board-$(CONFIG_MACH_NESO) := guf-neso
board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
new file mode 100644
index 0000000..6ce5ede
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_RPI) += rpi.o
diff --git a/arch/arm/boards/raspberry-pi/config.h b/arch/arm/boards/raspberry-pi/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/raspberry-pi/env/init/bootargs-base b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
new file mode 100644
index 0000000..d869754
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Base bootargs"
+ exit
+fi
+
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/raspberry-pi/env/init/hostname b/arch/arm/boards/raspberry-pi/env/init/hostname
new file mode 100644
index 0000000..7e8f294
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/hostname
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "hostname"
+ exit
+fi
+
+global.hostname=Raspberry-Pi
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
new file mode 100644
index 0000000..6c94dcd
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+
+#include <mach/core.h>
+
+static int rpi_mem_init(void)
+{
+ bcm2835_add_device_sdram(0);
+ return 0;
+}
+mem_initcall(rpi_mem_init);
+
+static int rpi_console_init(void)
+{
+ bcm2835_register_uart();
+ return 0;
+}
+console_initcall(rpi_console_init);
+
+static int rpi_devices_init(void)
+{
+ armlinux_set_architecture(MACH_TYPE_BCM2708);
+ armlinux_set_bootparams((void *)(0x00000100));
+ return 0;
+}
+
+device_initcall(rpi_devices_init);
diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
new file mode 100644
index 0000000..bca3d25
--- /dev/null
+++ b/arch/arm/configs/rpi_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARCH_BCM2835=y
+CONFIG_GPIO_BCM2835=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="R-Pi> "
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_GPIO=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index c42fe1c..9d97aea 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -1,3 +1,18 @@
if ARCH_BCM2835
+config ARCH_TEXT_BASE
+ hex
+ default 0x04000000 if MACH_RPI
+
+config BOARDINFO
+ default "RaspberryPi (BCM2835/ARM1176JZF-S)" if MACH_RPI
+
+choice
+ prompt "Broadcom Board type"
+
+config MACH_RPI
+ bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
+
+endchoice
+
endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 5/5] Raspberry-Pi: add support (board)
2012-10-13 11:23 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
@ 2012-10-13 12:16 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 13+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-13 12:16 UTC (permalink / raw)
To: Carlo Caione; +Cc: barebox
On 13:23 Sat 13 Oct , Carlo Caione wrote:
>
> Tested-By: Jan Luebbe <jlu@pengutronix.de>
> Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
> ---
> arch/arm/Makefile | 1 +
> arch/arm/boards/raspberry-pi/Kconfig | 10 +++++
> arch/arm/boards/raspberry-pi/Makefile | 1 +
> arch/arm/boards/raspberry-pi/config.h | 4 ++
> .../arm/boards/raspberry-pi/env/init/bootargs-base | 8 ++++
> arch/arm/boards/raspberry-pi/env/init/hostname | 8 ++++
> arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++++++++++++++++++
> arch/arm/configs/rpi_defconfig | 40 ++++++++++++++++++
> arch/arm/mach-bcm2835/Kconfig | 10 +++++
> 9 files changed, 131 insertions(+)
> create mode 100644 arch/arm/boards/raspberry-pi/Kconfig
> create mode 100644 arch/arm/boards/raspberry-pi/Makefile
> create mode 100644 arch/arm/boards/raspberry-pi/config.h
> create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
> create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
> create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
> create mode 100644 arch/arm/configs/rpi_defconfig
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 2ea11d6..adfe590 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -113,6 +113,7 @@ board-$(CONFIG_MACH_PCM043) := pcm043
> board-$(CONFIG_MACH_PM9261) := pm9261
> board-$(CONFIG_MACH_PM9263) := pm9263
> board-$(CONFIG_MACH_PM9G45) := pm9g45
> +board-$(CONFIG_MACH_RPI) := raspberry-pi
> board-$(CONFIG_MACH_SCB9328) := scb9328
> board-$(CONFIG_MACH_NESO) := guf-neso
> board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
> diff --git a/arch/arm/boards/raspberry-pi/Kconfig b/arch/arm/boards/raspberry-pi/Kconfig
> new file mode 100644
> index 0000000..3ac8829
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/Kconfig
no put this if the soc Kconfig otherwise we will become cray to maintain it
and search where the info i
> @@ -0,0 +1,10 @@
> +if MACH_RPI
> +
> +config ARCH_TEXT_BASE
> + hex
> + default 0x04000000
specially here when I expect that nearly all the brmc will use the same value
> +
> +config BOARDINFO
> + default "RaspberryPi (BCM2835/ARM1176JZF-S)"
so you end up with a Kconfig per board for just the BOARDINFO
which we should drop from Kconfig and put it in C
> +
> +endif
> diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
> new file mode 100644
> index 0000000..6ce5ede
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MACH_RPI) += rpi.o
> diff --git a/arch/arm/boards/raspberry-pi/config.h b/arch/arm/boards/raspberry-pi/config.h
> new file mode 100644
> index 0000000..ca15136
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/config.h
> @@ -0,0 +1,4 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#endif /* __CONFIG_H */
> diff --git a/arch/arm/boards/raspberry-pi/env/init/bootargs-base b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
> new file mode 100644
> index 0000000..d869754
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
> @@ -0,0 +1,8 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "Base bootargs"
> + exit
> +fi
> +
> +global.linux.bootargs.base="console=ttymxc0,115200"
> diff --git a/arch/arm/boards/raspberry-pi/env/init/hostname b/arch/arm/boards/raspberry-pi/env/init/hostname
> new file mode 100644
> index 0000000..7e8f294
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/env/init/hostname
> @@ -0,0 +1,8 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "hostname"
> + exit
> +fi
> +
> +global.hostname=Raspberry-Pi
> diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
> new file mode 100644
> index 0000000..6c94dcd
> --- /dev/null
> +++ b/arch/arm/boards/raspberry-pi/rpi.c
> @@ -0,0 +1,49 @@
> +/*
> + * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <asm/armlinux.h>
> +#include <generated/mach-types.h>
> +
> +#include <mach/core.h>
> +
> +static int rpi_mem_init(void)
> +{
> + bcm2835_add_device_sdram(0);
> + return 0;
> +}
> +mem_initcall(rpi_mem_init);
> +
> +static int rpi_console_init(void)
> +{
> + bcm2835_register_uart();
> + return 0;
> +}
> +console_initcall(rpi_console_init);
> +
> +static int rpi_devices_init(void)
> +{
> + armlinux_set_architecture(MACH_TYPE_BCM2708);
> + armlinux_set_bootparams((void *)(0x00000100));
> + return 0;
> +}
> +
> +device_initcall(rpi_devices_init);
> diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
> new file mode 100644
> index 0000000..bca3d25
> --- /dev/null
> +++ b/arch/arm/configs/rpi_defconfig
> @@ -0,0 +1,40 @@
> +CONFIG_ARCH_BCM2835=y
> +CONFIG_GPIO_BCM2835=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PROMPT="R-Pi> "
> +CONFIG_LONGHELP=y
> +CONFIG_GLOB=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_PARTITION=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +CONFIG_CMD_PASSWD=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MTEST=y
> +CONFIG_CMD_MTEST_ALTERNATIVE=y
> +CONFIG_CMD_BOOTM_ZLIB=y
> +CONFIG_CMD_BOOTM_BZLIB=y
> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_SERIAL_AMBA_PL011=y
> +CONFIG_SHA1=y
> +CONFIG_SHA256=y
> diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
> index c42fe1c..fadb1dc 100644
> --- a/arch/arm/mach-bcm2835/Kconfig
> +++ b/arch/arm/mach-bcm2835/Kconfig
> @@ -1,3 +1,13 @@
> if ARCH_BCM2835
>
> +choice
> + prompt "Broadcom Board type"
> +
> +config MACH_RPI
> + bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
> +
> +endchoice
> +
> +source arch/arm/boards/raspberry-pi/Kconfig
> +
> endif
> --
> 1.7.12.3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 5/5] Raspberry-Pi: add support (board)
2012-10-13 11:22 [PATCH 0/5] BCM2835/Raspberry-Pi Carlo Caione
@ 2012-10-13 11:23 ` Carlo Caione
2012-10-13 12:16 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 13+ messages in thread
From: Carlo Caione @ 2012-10-13 11:23 UTC (permalink / raw)
To: barebox
Tested-By: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/raspberry-pi/Kconfig | 10 +++++
arch/arm/boards/raspberry-pi/Makefile | 1 +
arch/arm/boards/raspberry-pi/config.h | 4 ++
.../arm/boards/raspberry-pi/env/init/bootargs-base | 8 ++++
arch/arm/boards/raspberry-pi/env/init/hostname | 8 ++++
arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++++++++++++++++++
arch/arm/configs/rpi_defconfig | 40 ++++++++++++++++++
arch/arm/mach-bcm2835/Kconfig | 10 +++++
9 files changed, 131 insertions(+)
create mode 100644 arch/arm/boards/raspberry-pi/Kconfig
create mode 100644 arch/arm/boards/raspberry-pi/Makefile
create mode 100644 arch/arm/boards/raspberry-pi/config.h
create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
create mode 100644 arch/arm/configs/rpi_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2ea11d6..adfe590 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -113,6 +113,7 @@ board-$(CONFIG_MACH_PCM043) := pcm043
board-$(CONFIG_MACH_PM9261) := pm9261
board-$(CONFIG_MACH_PM9263) := pm9263
board-$(CONFIG_MACH_PM9G45) := pm9g45
+board-$(CONFIG_MACH_RPI) := raspberry-pi
board-$(CONFIG_MACH_SCB9328) := scb9328
board-$(CONFIG_MACH_NESO) := guf-neso
board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
diff --git a/arch/arm/boards/raspberry-pi/Kconfig b/arch/arm/boards/raspberry-pi/Kconfig
new file mode 100644
index 0000000..3ac8829
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/Kconfig
@@ -0,0 +1,10 @@
+if MACH_RPI
+
+config ARCH_TEXT_BASE
+ hex
+ default 0x04000000
+
+config BOARDINFO
+ default "RaspberryPi (BCM2835/ARM1176JZF-S)"
+
+endif
diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
new file mode 100644
index 0000000..6ce5ede
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_RPI) += rpi.o
diff --git a/arch/arm/boards/raspberry-pi/config.h b/arch/arm/boards/raspberry-pi/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/raspberry-pi/env/init/bootargs-base b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
new file mode 100644
index 0000000..d869754
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/bootargs-base
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "Base bootargs"
+ exit
+fi
+
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/raspberry-pi/env/init/hostname b/arch/arm/boards/raspberry-pi/env/init/hostname
new file mode 100644
index 0000000..7e8f294
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/env/init/hostname
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "hostname"
+ exit
+fi
+
+global.hostname=Raspberry-Pi
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
new file mode 100644
index 0000000..6c94dcd
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+
+#include <mach/core.h>
+
+static int rpi_mem_init(void)
+{
+ bcm2835_add_device_sdram(0);
+ return 0;
+}
+mem_initcall(rpi_mem_init);
+
+static int rpi_console_init(void)
+{
+ bcm2835_register_uart();
+ return 0;
+}
+console_initcall(rpi_console_init);
+
+static int rpi_devices_init(void)
+{
+ armlinux_set_architecture(MACH_TYPE_BCM2708);
+ armlinux_set_bootparams((void *)(0x00000100));
+ return 0;
+}
+
+device_initcall(rpi_devices_init);
diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
new file mode 100644
index 0000000..bca3d25
--- /dev/null
+++ b/arch/arm/configs/rpi_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARCH_BCM2835=y
+CONFIG_GPIO_BCM2835=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_PROMPT="R-Pi> "
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_GPIO=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index c42fe1c..fadb1dc 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -1,3 +1,13 @@
if ARCH_BCM2835
+choice
+ prompt "Broadcom Board type"
+
+config MACH_RPI
+ bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
+
+endchoice
+
+source arch/arm/boards/raspberry-pi/Kconfig
+
endif
--
1.7.12.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2012-10-18 19:43 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-13 14:00 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-13 14:00 ` [PATCH 1/5] BCM2835: add clocksource driver Carlo Caione
2012-10-13 14:00 ` [PATCH 2/5] BCM2835: add gpio driver Carlo Caione
2012-10-13 14:00 ` [PATCH 3/5] ARM1176: add support Carlo Caione
2012-10-13 14:00 ` [PATCH 4/5] BCM2835: add support (arch) Carlo Caione
2012-10-13 14:00 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
2012-10-15 6:56 ` [PATCH 0/5] BCM2835/Raspberry-Pi support Sascha Hauer
2012-10-15 12:43 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-15 14:20 ` Carlo Caione
-- strict thread matches above, loose matches on Subject: below --
2012-10-18 19:42 Carlo Caione
2012-10-18 19:42 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
2012-10-16 18:04 [PATCH 0/5] BCM2835/Raspberry-Pi support Carlo Caione
2012-10-16 18:04 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
2012-10-13 11:22 [PATCH 0/5] BCM2835/Raspberry-Pi Carlo Caione
2012-10-13 11:23 ` [PATCH 5/5] Raspberry-Pi: add support (board) Carlo Caione
2012-10-13 12:16 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox