mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 12/28] ARM ep93xx boards: switch to barebox_arm_entry
Date: Wed, 17 Oct 2012 23:03:21 +0200	[thread overview]
Message-ID: <1350507817-7819-13-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1350507817-7819-1-git-send-email-s.hauer@pengutronix.de>

This architecture is a bit strange. It has up to four SDRAM banks, but
all have a quite limited size. The SDRAM size for the different boards
currently is unknown as it's configurable with Kconfig. We use a SDRAM
size based on the value of the only board we have in the defconfigs:
edb9301. This likely breaks other ep93xx boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-ep93xx/Makefile        |    4 ++--
 arch/arm/mach-ep93xx/lowlevel_init.S |   11 ++++++++++-
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 5615394..0ff0b66 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,4 +1,4 @@
 obj-y += clocksource.o gpio.o led.o header.o
 
-obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
-pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o led.o
+obj-y += lowlevel_init.o
+pbl-y += lowlevel_init.o led.o
diff --git a/arch/arm/mach-ep93xx/lowlevel_init.S b/arch/arm/mach-ep93xx/lowlevel_init.S
index 6de53dd..154d38d 100644
--- a/arch/arm/mach-ep93xx/lowlevel_init.S
+++ b/arch/arm/mach-ep93xx/lowlevel_init.S
@@ -20,6 +20,7 @@
  *
  */
 
+#include <sizes.h>
 #include <mach/ep93xx-regs.h>
 #include <asm/barebox-arm-head.h>
 
@@ -52,4 +53,12 @@ reset:
 	orr r0, r0, #0xc0000000
 	mcr p15, 0, r0, c1, c0, 0
 
-	b board_init_lowlevel_return
+	/*
+	 * FIXME: This is suitable for the edb9301, the
+	 * only ep93xx board we have in our defconfigs.
+	 * Other boards need different values here.
+	 */
+	mov	r0, #0x05000000
+	mov	r1, #SZ_8M
+	mov	r2, #0
+	b	barebox_arm_entry
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-10-17 21:03 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-17 21:03 [PATCH] ARM: Make memory known to lowlevel code Sascha Hauer
2012-10-17 21:03 ` [PATCH 01/28] ARM: Make malloc available in all initcalls Sascha Hauer
2012-10-17 21:03 ` [PATCH 02/28] ARM at91sam926x: provide reset function for boards with lowlevel init Sascha Hauer
2012-10-18  7:26   ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-19 15:30     ` Sascha Hauer
2012-10-17 21:03 ` [PATCH 03/28] ARM at91rm9200: " Sascha Hauer
2012-10-18  7:27   ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 21:03 ` [PATCH 04/28] ARM: Add new entry point for barebox Sascha Hauer
2012-10-17 21:03 ` [PATCH 05/28] ARM i.MX Add functions to get sdram base and size Sascha Hauer
2012-10-17 21:03 ` [PATCH 06/28] ARM i.MX boards: switch to barebox_arm_entry Sascha Hauer
2012-10-17 21:12   ` Alexander Shiyan
2012-11-01 19:21     ` Sascha Hauer
2012-10-17 21:03 ` [PATCH 07/28] ARM AT91 " Sascha Hauer
2012-10-17 21:03 ` [PATCH 08/28] ARM i.MXs " Sascha Hauer
2012-10-17 21:03 ` [PATCH 09/28] ARM OMAP " Sascha Hauer
2012-10-17 21:03 ` [PATCH 10/28] ARM Samsung " Sascha Hauer
2012-10-17 21:03 ` [PATCH 11/28] ARM PXA " Sascha Hauer
2012-10-17 21:03 ` Sascha Hauer [this message]
2012-10-17 21:03 ` [PATCH 13/28] ARM tegra " Sascha Hauer
2012-10-17 21:03 ` [PATCH 14/28] ARM nomadik " Sascha Hauer
2012-10-17 21:03 ` [PATCH 15/28] ARM versatile " Sascha Hauer
2012-10-17 21:03 ` [PATCH 16/28] ARM netx " Sascha Hauer
2012-10-17 21:03 ` [PATCH 17/28] ARM: remove now unused *_LOWLEVEL_INIT Kconfig options Sascha Hauer
2012-10-17 21:03 ` [PATCH 18/28] ARM start: remove unused board_init_lowlevel* functions Sascha Hauer
2012-10-17 21:03 ` [PATCH 19/28] ARM pbl: setup stack at end of SDRAM Sascha Hauer
2012-10-17 21:03 ` [PATCH 20/28] ARM pbl: Call uncompressed binary with arguments Sascha Hauer
2012-10-18  7:29   ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-19 15:32     ` Sascha Hauer
2012-10-19 16:15       ` Sascha Hauer
2012-10-17 21:03 ` [PATCH 21/28] ARM pbl: make MMU functional again Sascha Hauer
2012-10-17 21:03 ` [PATCH 22/28] ARM start: pick up memory/boarddata arguments from pbl Sascha Hauer
2012-10-17 21:03 ` [PATCH 23/28] ARM start: Add barebox_arm_boarddata function Sascha Hauer
2012-10-17 21:03 ` [PATCH 24/28] ARM: Determine base and size of malloc space from SDRAM Sascha Hauer
2012-10-17 21:03 ` [PATCH 25/28] ARM pbl: always copy piggydata Sascha Hauer
2012-10-18  7:23   ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-19 15:34     ` Sascha Hauer
2012-10-19 17:27       ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-17 21:03 ` [PATCH 26/28] ARM i.MX: Use SRAM stack in lowlevel code Sascha Hauer
2012-10-17 21:03 ` [PATCH 27/28] generic memory layout: fix deps for [MALLOC|STACK]_BASE Sascha Hauer
2012-10-17 21:03 ` [PATCH 28/28] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1350507817-7819-13-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox