From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/8] w1: introduce helper to generate mac address from 1-wire id
Date: Mon, 29 Oct 2012 14:46:58 +0100 [thread overview]
Message-ID: <1351518424-29523-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1351518424-29523-1-git-send-email-plagnioj@jcrosoft.com>
use the first 3 byte of the id of a 1-wire
or 6 if no OUI provided device to provide an Ethernet address
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
include/w1_mac_address.h | 72 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 include/w1_mac_address.h
diff --git a/include/w1_mac_address.h b/include/w1_mac_address.h
new file mode 100644
index 0000000..78348be
--- /dev/null
+++ b/include/w1_mac_address.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#ifndef __W1_MAC_ADDRESS_H__
+#define __W1_MAC_ADDRESS_H__
+
+/**
+ * w1_mac_address_register - use the first 3 byte of the id of a 1-wire
+ * or 6 if no OUI provided device to provide an Ethernet address
+ * @ethid: ethernet device id
+ * @local: generate a local Ethernet address
+ * @oui: Ethernet OUI (3 bytes
+ * @w1_dev: 1-wire device name
+ *
+ * Generate a Ethernet address (MAC) that is not multicast using a 1-wire id.
+ */
+static inline int w1_mac_address_register(int ethid, bool local,
+ char * oui, char *w1_dev)
+{
+ char addr[6];
+ const char *val;
+ u64 id;
+ int nb_oui = 0;
+ int i, shift;
+ char *tmp = NULL;
+ int ret = 0;
+
+ if (!local && !oui)
+ return -EINVAL;
+
+ if (oui) {
+ nb_oui = 3;
+
+ for (i = 0; i < nb_oui; i++)
+ addr[i] = oui[i];
+ }
+
+ tmp = asprintf("%s.id", w1_dev);
+ if (!tmp)
+ return -ENOMEM;
+
+ val = getenv(tmp);
+ if (!val) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ id = simple_strtoull(val, NULL, 16);
+ if (!id) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ for (i = nb_oui, shift = 40; i < 6; i++, shift -= 8)
+ addr[i] = (id >> shift) & 0xff;
+
+ if (local) {
+ addr[0] &= 0xfe; /* clear multicast bit */
+ addr[0] |= 0x02; /* set local assignment bit (IEEE802) */
+ }
+
+ eth_register_ethaddr(ethid, addr);
+
+err:
+ free(tmp);
+ return ret;
+}
+
+#endif /* __W1_MAC_ADDRESS_H__ */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-10-29 13:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-29 13:40 [PATCH 0/8 v2:wqa] pm9g45/pm9253/pm9261: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:46 ` [PATCH 1/8] arm: at91: add gpio_is_valid support Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:46 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-10-29 22:24 ` [PATCH 2/8] w1: introduce helper to generate mac address from 1-wire id Sascha Hauer
2012-10-29 13:46 ` [PATCH 3/8] pm9g45: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:47 ` [PATCH 4/8] pm9g45: use w1 serial number to generate local mac address Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:47 ` [PATCH 5/8] pm9263: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:47 ` [PATCH 6/8] pm9263: use w1 serial number to generate local mac address Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:47 ` [PATCH 7/8] pm9261: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 13:47 ` [PATCH 8/8] pm9261: use w1 serial number to generate local mac address Jean-Christophe PLAGNIOL-VILLARD
2012-10-30 7:32 ` [PATCH 1/8] arm: at91: add gpio_is_valid support Sascha Hauer
2012-10-30 8:41 ` Jean-Christophe PLAGNIOL-VILLARD
-- strict thread matches above, loose matches on Subject: below --
2012-10-30 20:54 [PATCH 0/8 v3] pm9g45/pm9253/pm9261: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-30 21:00 ` [PATCH 1/8] arm: at91: add gpio_is_valid support Jean-Christophe PLAGNIOL-VILLARD
2012-10-30 21:00 ` [PATCH 2/8] w1: introduce helper to generate mac address from 1-wire id Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:21 [PATCH 0/8] pm9g45/pm9253/pm9261: add 1-wire support Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 1/8] arm: at91: add gpio_is_valid support Jean-Christophe PLAGNIOL-VILLARD
2012-10-28 0:24 ` [PATCH 2/8] w1: introduce helper to generate mac address from 1-wire id Jean-Christophe PLAGNIOL-VILLARD
2012-10-29 8:33 ` Sascha Hauer
2012-10-29 11:29 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351518424-29523-2-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox