* [PATCH] net usb asix: Add missing line breaks in dev_* messages
@ 2012-11-01 7:43 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2012-11-01 7:43 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/net/usb/asix.c | 56 ++++++++++++++++++++++++------------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 97680cf..5975e2a 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -154,7 +154,7 @@ static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
void *buf;
int err = -ENOMEM;
- dev_dbg(&dev->edev.dev, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ dev_dbg(&dev->edev.dev, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
cmd, value, index, size);
buf = malloc(size);
@@ -187,7 +187,7 @@ static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
void *buf = NULL;
int err = -ENOMEM;
- dev_dbg(&dev->edev.dev, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ dev_dbg(&dev->edev.dev, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
cmd, value, index, size);
if (data) {
@@ -218,7 +218,7 @@ static inline int asix_set_sw_mii(struct usbnet *dev)
int ret;
ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
if (ret < 0)
- dev_err(&dev->edev.dev, "Failed to enable software MII access");
+ dev_err(&dev->edev.dev, "Failed to enable software MII access\n");
return ret;
}
@@ -227,7 +227,7 @@ static inline int asix_set_hw_mii(struct usbnet *dev)
int ret;
ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
if (ret < 0)
- dev_err(&dev->edev.dev, "Failed to enable hardware MII access");
+ dev_err(&dev->edev.dev, "Failed to enable hardware MII access\n");
return ret;
}
@@ -241,7 +241,7 @@ static int asix_mdio_read(struct mii_bus *bus, int phy_id, int loc)
(__u16)loc, 2, &res);
asix_set_hw_mii(dev);
- dev_dbg(&dev->edev.dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x",
+ dev_dbg(&dev->edev.dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
phy_id, loc, le16_to_cpu(res));
return le16_to_cpu(res);
@@ -252,7 +252,7 @@ static int asix_mdio_write(struct mii_bus *bus, int phy_id, int loc, u16 val)
struct usbnet *dev = bus->priv;
__le16 res = cpu_to_le16(val);
- dev_dbg(&dev->edev.dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x",
+ dev_dbg(&dev->edev.dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
phy_id, loc, val);
asix_set_sw_mii(dev);
@@ -270,10 +270,10 @@ static inline int asix_get_phy_addr(struct usbnet *dev)
dev_dbg(&dev->edev.dev, "asix_get_phy_addr()");
if (ret < 0) {
- dev_err(&dev->edev.dev, "Error reading PHYID register: %02x", ret);
+ dev_err(&dev->edev.dev, "Error reading PHYID register: %02x\n", ret);
goto out;
}
- dev_dbg(&dev->edev.dev, "asix_get_phy_addr() returning 0x%04x", *((__le16 *)buf));
+ dev_dbg(&dev->edev.dev, "asix_get_phy_addr() returning 0x%04x\n", *((__le16 *)buf));
ret = buf[1];
out:
@@ -286,7 +286,7 @@ static int asix_sw_reset(struct usbnet *dev, u8 flags)
ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
if (ret < 0)
- dev_err(&dev->edev.dev, "Failed to send software reset: %02x", ret);
+ dev_err(&dev->edev.dev, "Failed to send software reset: %02x\n", ret);
return ret;
}
@@ -297,7 +297,7 @@ static u16 asix_read_rx_ctl(struct usbnet *dev)
int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
if (ret < 0) {
- dev_err(&dev->edev.dev, "Error reading RX_CTL register: %02x", ret);
+ dev_err(&dev->edev.dev, "Error reading RX_CTL register: %02x\n", ret);
goto out;
}
ret = le16_to_cpu(v);
@@ -309,10 +309,10 @@ static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
{
int ret;
- dev_dbg(&dev->edev.dev, "asix_write_rx_ctl() - mode = 0x%04x", mode);
+ dev_dbg(&dev->edev.dev, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
if (ret < 0)
- dev_err(&dev->edev.dev, "Failed to write RX_CTL mode to 0x%04x: %02x",
+ dev_err(&dev->edev.dev, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
mode, ret);
return ret;
@@ -324,7 +324,7 @@ static u16 asix_read_medium_status(struct usbnet *dev)
int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
if (ret < 0) {
- dev_err(&dev->edev.dev, "Error reading Medium Status register: %02x", ret);
+ dev_err(&dev->edev.dev, "Error reading Medium Status register: %02x\n", ret);
goto out;
}
ret = le16_to_cpu(v);
@@ -336,10 +336,10 @@ static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
{
int ret;
- dev_dbg(&dev->edev.dev, "asix_write_medium_mode() - mode = 0x%04x", mode);
+ dev_dbg(&dev->edev.dev, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
if (ret < 0)
- dev_err(&dev->edev.dev, "Failed to write Medium Mode mode to 0x%04x: %02x",
+ dev_err(&dev->edev.dev, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
mode, ret);
return ret;
@@ -349,10 +349,10 @@ static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
{
int ret;
- dev_dbg(&dev->edev.dev,"asix_write_gpio() - value = 0x%04x", value);
+ dev_dbg(&dev->edev.dev,"asix_write_gpio() - value = 0x%04x\n", value);
ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
if (ret < 0)
- dev_err(&dev->edev.dev, "Failed to write GPIO value 0x%04x: %02x",
+ dev_err(&dev->edev.dev, "Failed to write GPIO value 0x%04x: %02x\n",
value, ret);
if (sleep)
@@ -369,7 +369,7 @@ static int asix_get_ethaddr(struct eth_device *edev, unsigned char *adr)
/* Get the MAC address */
if ((ret = asix_read_cmd(udev, AX_CMD_READ_NODE_ID,
0, 0, 6, adr)) < 0) {
- debug("Failed to read MAC address: %d", ret);
+ debug("Failed to read MAC address: %d\n", ret);
return -1;
}
@@ -390,7 +390,7 @@ static int ax88172_get_ethaddr(struct eth_device *edev, unsigned char *adr)
/* Get the MAC address */
if ((ret = asix_read_cmd(udev, AX88172_CMD_READ_NODE_ID,
0, 0, 6, adr)) < 0) {
- debug("read AX_CMD_READ_NODE_ID failed: %d", ret);
+ debug("read AX_CMD_READ_NODE_ID failed: %d\n", ret);
return -1;
}
@@ -409,13 +409,13 @@ static int asix_rx_fixup(struct usbnet *dev, void *buf, int len)
while (len > 0) {
if ((short)(header & 0x0000ffff) != ~((short)((header & 0xffff0000) >> 16)))
- dev_err(&dev->edev.dev, "asix_rx_fixup() Bad Header Length");
+ dev_err(&dev->edev.dev, "asix_rx_fixup() Bad Header Length\n");
/* get the packet length */
size = (unsigned short) (header & 0x0000ffff);
if (size > 1514) {
- dev_err(&dev->edev.dev, "asix_rx_fixup() Bad RX Length %d", size);
+ dev_err(&dev->edev.dev, "asix_rx_fixup() Bad RX Length %d\n", size);
return 0;
}
@@ -434,7 +434,7 @@ static int asix_rx_fixup(struct usbnet *dev, void *buf, int len)
}
if (len < 0) {
- dev_err(&dev->edev.dev,"asix_rx_fixup() Bad SKB Length %d", len);
+ dev_err(&dev->edev.dev,"asix_rx_fixup() Bad SKB Length %d\n", len);
return -1;
}
return 0;
@@ -549,7 +549,7 @@ static int ax88772_bind(struct usbnet *dev)
embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
embd_phy, 0, 0, NULL)) < 0) {
- debug("Select PHY #1 failed: %d", ret);
+ debug("Select PHY #1 failed: %d\n", ret);
goto out;
}
@@ -572,12 +572,12 @@ static int ax88772_bind(struct usbnet *dev)
mdelay(150);
rx_ctl = asix_read_rx_ctl(dev);
- debug("RX_CTL is 0x%04x after software reset", rx_ctl);
+ debug("RX_CTL is 0x%04x after software reset\n", rx_ctl);
if ((ret = asix_write_rx_ctl(dev, 0x0000)) < 0)
goto out;
rx_ctl = asix_read_rx_ctl(dev);
- debug("RX_CTL is 0x%04x setting to 0x0000", rx_ctl);
+ debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
dev->edev.get_ethaddr = asix_get_ethaddr;
dev->edev.set_ethaddr = asix_set_ethaddr;
@@ -599,7 +599,7 @@ static int ax88772_bind(struct usbnet *dev)
if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
AX88772_IPG2_DEFAULT, 0, NULL)) < 0) {
- debug("Write IPG,IPG1,IPG2 failed: %d", ret);
+ debug("Write IPG,IPG1,IPG2 failed: %d\n", ret);
goto out;
}
@@ -608,10 +608,10 @@ static int ax88772_bind(struct usbnet *dev)
goto out;
rx_ctl = asix_read_rx_ctl(dev);
- debug("RX_CTL is 0x%04x after all initializations", rx_ctl);
+ debug("RX_CTL is 0x%04x after all initializations\n", rx_ctl);
rx_ctl = asix_read_medium_status(dev);
- debug("Medium Status is 0x%04x after all initializations", rx_ctl);
+ debug("Medium Status is 0x%04x after all initializations\n", rx_ctl);
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-11-01 7:43 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-01 7:43 [PATCH] net usb asix: Add missing line breaks in dev_* messages Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox