From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp6-g21.free.fr ([2a01:e0c:1:1599::15]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TTyi2-0001nx-7B for barebox@lists.infradead.org; Thu, 01 Nov 2012 17:37:41 +0000 From: Robert Jarzmik Date: Thu, 1 Nov 2012 18:37:18 +0100 Message-Id: <1351791438-29967-3-git-send-email-robert.jarzmik@free.fr> In-Reply-To: <1351791438-29967-1-git-send-email-robert.jarzmik@free.fr> References: <1351791438-29967-1-git-send-email-robert.jarzmik@free.fr> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 2/2] commands: remove old Y-Modem implementation To: plagnioj@jcrosoft.com, antonynpavlov@gmail.com, s.hauer@pengutronix.de Cc: barebox@lists.infradead.org, Robert Jarzmik From: Robert Jarzmik As a new implementation of Y-Modem protocol is available, switch from old implementation to the new one : - remove old xyzModem* files - remove old command loady2 - rename command loady2 to loady Signed-off-by: Robert Jarzmik --- commands/Makefile | 4 +- commands/loadb.c | 102 +------ commands/loads.c | 1 - commands/loadxy.c | 2 +- commands/xyzModem.c | 785 --------------------------------------------------- include/xyzModem.h | 109 ------- 6 files changed, 12 insertions(+), 991 deletions(-) delete mode 100644 commands/xyzModem.c delete mode 100644 include/xyzModem.h diff --git a/commands/Makefile b/commands/Makefile index 342c1ee..833b41f 100644 --- a/commands/Makefile +++ b/commands/Makefile @@ -2,8 +2,8 @@ obj-$(CONFIG_STDDEV) += stddev.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_UIMAGE) += uimage.o obj-$(CONFIG_CMD_LINUX16) += linux16.o -obj-$(CONFIG_CMD_LOADB) += loadb.o xyzModem.o -obj-$(CONFIG_CMD_LOADY) += loadb.o xyzModem.o loadxy.o xymodem.o +obj-$(CONFIG_CMD_LOADB) += loadb.o +obj-$(CONFIG_CMD_LOADY) += loadxy.o xymodem.o obj-$(CONFIG_CMD_LOADS) += loads.o obj-$(CONFIG_CMD_ECHO) += echo.o obj-$(CONFIG_CMD_MEMORY) += mem.o diff --git a/commands/loadb.c b/commands/loadb.c index 898b9e3..a2f3315 100644 --- a/commands/loadb.c +++ b/commands/loadb.c @@ -31,7 +31,6 @@ */ #include #include -#include #include #include #include @@ -59,8 +58,6 @@ static int ofd; /* output file descriptor */ -#ifdef CONFIG_CMD_LOADB - /* Size of my buffer to write to o/p file */ #define MAX_WRITE_BUFFER 4096 /* Write size to o/p file */ static char *write_buffer; /* buffer for finalized data to write */ @@ -593,66 +590,6 @@ err_quit: return size; } -#endif /* CONFIG_CMD_LOADB */ - -#ifdef CONFIG_CMD_LOADY -/** - * @brief getcxmodem - * - * @return if character avaiable, return the same, else return -1 - */ -static int getcxmodem(void) -{ - if (tstc()) - return (getc()); - return -1; -} - -/** - * @brief LoadY over ymodem protocol - * - * @return download size - */ -static ulong load_serial_ymodem(void) -{ - int size; - char buf[32]; - int err; - int res, wr; - connection_info_t info; - char ymodemBuf[1024]; - ulong addr = 0; - - size = 0; - info.mode = xyzModem_ymodem; - res = xyzModem_stream_open(&info, &err); - if (!res) { - while ((res = xyzModem_stream_read(ymodemBuf, 1024, &err)) > - 0) { - size += res; - addr += res; - wr = write(ofd, ymodemBuf, res); - if (res != wr) { - perror("ymodem"); - break; - } - - } - } else { - printf("%s\n", xyzModem_error(err)); - } - - xyzModem_stream_close(&err); - xyzModem_stream_terminate(false, &getcxmodem); - - printf("## Total Size = 0x%08x = %d Bytes\n", size, size); - sprintf(buf, "%X", size); - setenv("filesize", buf); - - return res; -} -#endif - /** * @brief returns current used console device * @@ -754,27 +691,16 @@ static int do_load_serial_bin(int argc, char *argv[]) break; } } -#ifdef CONFIG_CMD_LOADY - if (strcmp(argv[0], "loady") == 0) { - printf("## Ready for binary (ymodem) download " - "to 0x%08lX offset on %s device at %d bps...\n", offset, - output_file, load_baudrate); - addr = load_serial_ymodem(); - } -#endif -#ifdef CONFIG_CMD_LOADB - if (strcmp(argv[0], "loadb") == 0) { - - printf("## Ready for binary (kermit) download " - "to 0x%08lX offset on %s device at %d bps...\n", offset, - output_file, load_baudrate); - addr = load_serial_bin(); - if (addr == 0) { - printf("## Binary (kermit) download aborted\n"); - rcode = 1; - } + + printf("## Ready for binary (kermit) download " + "to 0x%08lX offset on %s device at %d bps...\n", offset, + output_file, load_baudrate); + addr = load_serial_bin(); + if (addr == 0) { + printf("## Binary (kermit) download aborted\n"); + rcode = 1; } -#endif + if (load_baudrate != current_baudrate) { printf("## Switch baudrate to %d bps and press ESC ...\n", current_baudrate); @@ -799,18 +725,8 @@ static const __maybe_unused char cmd_loadb_help[] = " -b baud - baudrate at which to download - defaults to " "console baudrate\n" " -c - Create file if it is not present - default disabled"; -#ifdef CONFIG_CMD_LOADB BAREBOX_CMD_START(loadb) .cmd = do_load_serial_bin, .usage = "Load binary file over serial line (kermit mode)", BAREBOX_CMD_HELP(cmd_loadb_help) BAREBOX_CMD_END -#endif -#ifdef CONFIG_CMD_LOADY -BAREBOX_CMD_START(loady) - .cmd = do_load_serial_bin, - .usage = "Load binary file over serial line (ymodem mode)", - BAREBOX_CMD_HELP(cmd_loadb_help) -BAREBOX_CMD_END -#endif - diff --git a/commands/loads.c b/commands/loads.c index 7f4c647..bfc465b 100644 --- a/commands/loads.c +++ b/commands/loads.c @@ -25,7 +25,6 @@ #include #include #include -#include static ulong load_serial(ulong offset); static int read_record(char *buf, ulong len); diff --git a/commands/loadxy.c b/commands/loadxy.c index 141bd7b..8914655 100644 --- a/commands/loadxy.c +++ b/commands/loadxy.c @@ -230,7 +230,7 @@ static const __maybe_unused char cmd_loady_help[] = "console baudrate\n"; #ifdef CONFIG_CMD_LOADY -BAREBOX_CMD_START(loady2) +BAREBOX_CMD_START(loady) .cmd = do_loady, .usage = "Load binary file over serial line (Y-Modem or Y-Modem/G)", BAREBOX_CMD_HELP(cmd_loady_help) diff --git a/commands/xyzModem.c b/commands/xyzModem.c deleted file mode 100644 index 71d7d68..0000000 --- a/commands/xyzModem.c +++ /dev/null @@ -1,785 +0,0 @@ -/** - * @file - * @brief RedBoot stream handler for xyzModem protocol - * - * FileName: commands/xyzModem.c - * Originally from u-boot xyzModem.c - */ -/* - * 2008 - Nishanth Menon - * Modified for sparse and checkpatch.pl compliance - */ -/* - *========================================================================== - * - * xyzModem.c - * - * RedBoot stream handler for xyzModem protocol - * - *========================================================================== - *####ECOSGPLCOPYRIGHTBEGIN#### - * ------------------------------------------- - * This file is part of eCos, the Embedded Configurable Operating System. - * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. - * Copyright (C) 2002 Gary Thomas - * - * eCos is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 or (at your option) any later version. - * - * eCos is distributed in the hope that it will be useful, but WITHOUT ANY - * WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with eCos; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * As a special exception, if other files instantiate templates or use macros - * or inline functions from this file, or you compile this file and link it - * with other works to produce a work based on this file, this file does not - * by itself cause the resulting work to be covered by the GNU General Public - * License. However the source code for this file must still be made available - * in accordance with section (3) of the GNU General Public License. - * - * This exception does not invalidate any other reasons why a work based on - * this file might be covered by the GNU General Public License. - * - * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. - * at http: *sources.redhat.com/ecos/ecos-license/ - * ------------------------------------------- - *####ECOSGPLCOPYRIGHTEND#### - *========================================================================== - *#####DESCRIPTIONBEGIN#### - * - * Author(s): gthomas - * Contributors: gthomas, tsmith, Yoshinori Sato - * Date: 2000-07-14 - * Purpose: - * Description: - * - * This code is part of RedBoot (tm). - * - *####DESCRIPTIONEND#### - * - *========================================================================== - */ -#include -#include -#include -#include -#include -#include -#include - -/* Assumption - run xyzModem protocol over the console port */ - -/* Values magic to the protocol */ -#define SOH 0x01 -#define STX 0x02 -#define EOT 0x04 -#define ACK 0x06 -#define BSP 0x08 -#define NAK 0x15 -#define CAN 0x18 -#define EOF 0x1A /* ^Z for DOS officionados */ - -#define USE_YMODEM_LENGTH - -/* Data & state local to the protocol */ -static struct { -#ifdef REDBOOT - hal_virtual_comm_table_t *__chan; -#else - int *__chan; -#endif - unsigned char pkt[1024], *bufp; - unsigned char blk, cblk, crc1, crc2; - unsigned char next_blk; /* Expected block */ - int len, mode, total_retries; - int total_SOH, total_STX, total_CAN; - bool crc_mode, at_eof, tx_ack; -#ifdef USE_YMODEM_LENGTH - unsigned long file_length, read_length; -#endif -} xyz; - -#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */ -#define xyzModem_MAX_RETRIES 20 -#define xyzModem_MAX_RETRIES_WITH_CRC 10 -/* Wait for 3 CAN before quitting */ -#define xyzModem_CAN_COUNT 3 - -#ifndef REDBOOT /*SB */ -typedef int cyg_int32; -static int CYGACC_COMM_IF_GETC_TIMEOUT(char chan, char *c) -{ -#define DELAY 20 - unsigned long counter = 0; - while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY)) { - udelay(DELAY); - counter++; - } - if (tstc()) { - *c = getc(); - return 1; - } - return 0; -} - -static void CYGACC_COMM_IF_PUTC(char x, char y) -{ - console_putc(CONSOLE_STDOUT, y); -} - -/* Validate a hex character */ -static inline bool _is_hex(char c) -{ - return (((c >= '0') && (c <= '9')) || - ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f'))); -} - -/* Convert a single hex nibble */ -static inline int _from_hex(char c) -{ - int ret = 0; - - if ((c >= '0') && (c <= '9')) - ret = (c - '0'); - else if ((c >= 'a') && (c <= 'f')) - ret = (c - 'a' + 0x0a); - else if ((c >= 'A') && (c <= 'F')) - ret = (c - 'A' + 0x0A); - - return ret; -} - -/* Parse (scan) a number */ -static bool parse_num(char *s, unsigned long *val, char **es, char *delim) -{ - bool first = true; - int radix = 10; - char c; - unsigned long result = 0; - int digit = 0; - - while (*s == ' ') - s++; - while (*s) { - if (first && (s[0] == '0') && (tolower(s[1]) == 'x')) { - radix = 16; - s += 2; - } - first = false; - c = *s++; - if (_is_hex(c)) - digit = _from_hex(c); - if (_is_hex(c) && (digit < radix)) { - /* Valid digit */ -#ifdef CYGPKG_HAL_MIPS - /* FIXME: tx49 compiler generates 0x2539018 for - * MUL which isn't any good. */ - if (16 == radix) - result = result << 4; - else - result = 10 * result; - result += digit; -#else - result = (result * radix) + digit; -#endif - } else { - if (delim != (char *)0) { - /* See if this character is one of the - * delimiters */ - char *dp = delim; - while (*dp && (c != *dp)) - dp++; - if (*dp) - break; /* Found a good delimiter */ - } - return false; /* Malformatted number */ - } - } - *val = result; - if (es != (char **)0) - *es = s; - return true; -} - -#endif - -#define USE_SPRINTF -#ifdef DEBUG -#ifndef USE_SPRINTF -/* - * Note: this debug setup only works if the target platform has two serial ports - * available so that the other one (currently only port 1) can be used for debug - * messages. - */ -static int zm_dprintf(char *fmt, ...) -{ - int cur_console; - va_list args; - - va_start(args, fmt); -#ifdef REDBOOT - cur_console = - CYGACC_CALL_IF_SET_CONSOLE_COMM - (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); - CYGACC_CALL_IF_SET_CONSOLE_COMM(1); -#endif - diag_vprintf(fmt, args); -#ifdef REDBOOT - CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console); -#endif -} - -static void zm_flush(void) -{ -} - -#else -/* - * Note: this debug setup works by storing the strings in a fixed buffer - */ -#define FINAL -#ifdef FINAL -static char *zm_out = (char *)0x00380000; -static char *zm_out_start = (char *)0x00380000; -#else -static char zm_buf[8192]; -static char *zm_out = zm_buf; -static char *zm_out_start = zm_buf; - -#endif -static int zm_dprintf(char *fmt, ...) -{ - int len; - va_list args; - - va_start(args, fmt); - len = diag_vsprintf(zm_out, fmt, args); - zm_out += len; - return len; -} - -static void zm_flush(void) -{ -#ifdef REDBOOT - char *p = zm_out_start; - while (*p) - mon_write_char(*p++); -#endif - zm_out = zm_out_start; -} -#endif - -static void zm_dump_buf(void *buf, int len) -{ -#ifdef REDBOOT - diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0); -#else - -#endif -} - -static unsigned char zm_buf[2048]; -static unsigned char *zm_bp; - -static void zm_new(void) -{ - zm_bp = zm_buf; -} - -static void zm_save(unsigned char c) -{ - *zm_bp++ = c; -} - -static void zm_dump(int line) -{ - zm_dprintf("Packet at line: %d\n", line); - zm_dump_buf(zm_buf, zm_bp - zm_buf); -} - -#define ZM_DEBUG(x) x -#else -#define ZM_DEBUG(x) -#endif - -/* Wait for the line to go idle */ -static void xyzModem_flush(void) -{ - int res; - char c; - while (true) { - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); - if (!res) - return; - } -} - -static int xyzModem_get_hdr(void) -{ - char c; - int res; - bool hdr_found = false; - int i, can_total, hdr_chars; - unsigned short cksum; - - ZM_DEBUG(zm_new()); - /* Find the start of a header */ - can_total = 0; - hdr_chars = 0; - - if (xyz.tx_ack) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - xyz.tx_ack = false; - } - while (!hdr_found) { - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); - ZM_DEBUG(zm_save(c)); - if (res) { - hdr_chars++; - switch (c) { - case SOH: - xyz.total_SOH++; - case STX: - if (c == STX) - xyz.total_STX++; - hdr_found = true; - break; - case CAN: - xyz.total_CAN++; - ZM_DEBUG(zm_dump(__LINE__)); - if (++can_total == xyzModem_CAN_COUNT) { - return xyzModem_cancel; - } else { - /* Wait for multiple CAN to avoid - * early quits */ - break; - } - case EOT: - /* EOT only supported if no noise */ - if (hdr_chars == 1) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - ZM_DEBUG(zm_dprintf - ("ACK on EOT #%d\n", - __LINE__)); - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_eof; - } - default: - /* Ignore, waiting for start of header */ - ; - } - } else { - /* Data stream timed out */ - xyzModem_flush(); /* Toss any current input */ - ZM_DEBUG(zm_dump(__LINE__)); - CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000); - return xyzModem_timeout; - } - } - - /* Header found, now read the data */ - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk); - ZM_DEBUG(zm_save(xyz.blk)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; - } - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk); - ZM_DEBUG(zm_save(xyz.cblk)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; - } - xyz.len = (c == SOH) ? 128 : 1024; - xyz.bufp = xyz.pkt; - for (i = 0; i < xyz.len; i++) { - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); - ZM_DEBUG(zm_save(c)); - if (res) { - xyz.pkt[i] = c; - } else { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; - } - } - res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1); - ZM_DEBUG(zm_save(xyz.crc1)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; - } - if (xyz.crc_mode) { - res = - CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2); - ZM_DEBUG(zm_save(xyz.crc2)); - if (!res) { - ZM_DEBUG(zm_dump(__LINE__)); - return xyzModem_timeout; - } - } - ZM_DEBUG(zm_dump(__LINE__)); - /* Validate the message */ - if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) { - ZM_DEBUG(zm_dprintf - ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, - (xyz.blk ^ xyz.cblk))); - ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len)); - xyzModem_flush(); - return xyzModem_frame; - } - /* Verify checksum/CRC */ - if (xyz.crc_mode) { - cksum = cyg_crc16(xyz.pkt, xyz.len); - if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) { - ZM_DEBUG(zm_dprintf - ("CRC error - recvd: %02x%02x, computed: %x\n", - xyz.crc1, xyz.crc2, cksum & 0xFFFF)); - return xyzModem_cksum; - } - } else { - cksum = 0; - for (i = 0; i < xyz.len; i++) - cksum += xyz.pkt[i]; - if (xyz.crc1 != (cksum & 0xFF)) { - ZM_DEBUG(zm_dprintf - ("Checksum error - recvd: %x, computed: %x\n", - xyz.crc1, cksum & 0xFF)); - return xyzModem_cksum; - } - } - /* If we get here, the message passes [structural] muster */ - return 0; -} - -int xyzModem_stream_open(connection_info_t *info, int *err) -{ -#ifdef REDBOOT - int console_chan; -#endif - int stat = 0; - int retries = xyzModem_MAX_RETRIES; - int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; - -/* ZM_DEBUG(zm_out = zm_out_start); */ -#ifdef xyzModem_zmodem - if (info->mode == xyzModem_zmodem) { - *err = xyzModem_noZmodem; - return -1; - } -#endif - -#ifdef REDBOOT - /* Set up the I/O channel. Note: this allows for using a different - * port in the future */ - console_chan = - CYGACC_CALL_IF_SET_CONSOLE_COMM - (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); - if (info->chan >= 0) - CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan); - else - CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); - - xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS(); - - CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); - CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, - xyzModem_CHAR_TIMEOUT); -#else -/* TODO: CHECK ! */ - int dummy = 0; - xyz.__chan = &dummy; -#endif - xyz.len = 0; - xyz.crc_mode = true; - xyz.at_eof = false; - xyz.tx_ack = false; - xyz.mode = info->mode; - xyz.total_retries = 0; - xyz.total_SOH = 0; - xyz.total_STX = 0; - xyz.total_CAN = 0; -#ifdef USE_YMODEM_LENGTH - xyz.read_length = 0; - xyz.file_length = 0; -#endif - - CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); - - if (xyz.mode == xyzModem_xmodem) { - /* X-modem doesn't have an information header - exit here */ - xyz.next_blk = 1; - return 0; - } - - while (retries-- > 0) { - stat = xyzModem_get_hdr(); - if (stat == 0) { - /* Y-modem file information header */ - if (xyz.blk == 0) { -#ifdef USE_YMODEM_LENGTH - /* skip filename */ - while (*xyz.bufp++) ; - /* get the length */ - parse_num((char *)xyz.bufp, &xyz.file_length, - NULL, " "); -#endif - /* The rest of the file name data block - * quietly discarded - */ - xyz.tx_ack = true; - } - xyz.next_blk = 1; - xyz.len = 0; - return 0; - } else if (stat == xyzModem_timeout) { - if (--crc_retries <= 0) - xyz.crc_mode = false; - /* Extra delay for startup */ - CYGACC_CALL_IF_DELAY_US(5 * 100000); - CYGACC_COMM_IF_PUTC(*xyz.__chan, - (xyz.crc_mode ? 'C' : NAK)); - xyz.total_retries++; - ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); - } - if (stat == xyzModem_cancel) - break; - } - *err = stat; - ZM_DEBUG(zm_flush()); - return -1; -} - -int xyzModem_stream_read(char *buf, int size, int *err) -{ - int stat, total, len; - int retries; - - total = 0; - stat = xyzModem_cancel; - /* Try and get 'size' bytes into the buffer */ - while (!xyz.at_eof && (size > 0)) { - if (xyz.len == 0) { - retries = xyzModem_MAX_RETRIES; - while (retries-- > 0) { - stat = xyzModem_get_hdr(); - if (stat == 0) { - if (xyz.blk == xyz.next_blk) { - xyz.tx_ack = true; - ZM_DEBUG(zm_dprintf - ("ACK block %d (%d)\n", - xyz.blk, __LINE__)); - xyz.next_blk = - (xyz.next_blk + 1) & 0xFF; - -#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH) - if (xyz.mode == xyzModem_xmodem - || xyz.file_length == 0) { -#else - if (1) { -#endif - /* WARNING - Leaving formatting aside for code - * clarity */ - /* Data blocks can be padded with ^Z (EOF) characters */ - /* This code tries to detect and remove them */ - if ((xyz.bufp[xyz.len - 1] == EOF) - && (xyz.bufp[xyz.len - 2] == EOF) - && (xyz.bufp[xyz.len - 3] == EOF)) { - while (xyz.len && - (xyz.bufp[xyz.len - 1] == EOF)) - xyz.len--; - } - } -#ifdef USE_YMODEM_LENGTH - /* WARNING - Leaving formatting aside for code - * clarity */ - /* - * See if accumulated length exceeds that of the file. - * If so, reduce size (i.e., cut out pad bytes) - * Only do this for Y-modem (and Z-modem should it ever - * be supported since it can fall back to Y-modem mode). - */ - if (xyz.mode != xyzModem_xmodem - && 0 != xyz.file_length) { - xyz.read_length += xyz.len; - if (xyz.read_length > xyz.file_length) - xyz.len -= (xyz.read_length - - xyz.file_length); - } -#endif - break; - } else if (xyz.blk == - ((xyz.next_blk - 1) & - 0xFF)) { - /* Just re-ACK this so sender - * will get on with it */ - CYGACC_COMM_IF_PUTC(*xyz.__chan, - ACK); - /* Need new header */ - continue; - } else - stat = xyzModem_sequence; - } - if (stat == xyzModem_cancel) - break; - if (stat == xyzModem_eof) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); - ZM_DEBUG(zm_dprintf - ("ACK (%d)\n", __LINE__)); - if (xyz.mode == xyzModem_ymodem) { - CYGACC_COMM_IF_PUTC(*xyz.__chan, - (xyz. - crc_mode ? - 'C' : - NAK)); - xyz.total_retries++; - ZM_DEBUG(zm_dprintf - ("Reading Final Header\n")); - stat = xyzModem_get_hdr(); - CYGACC_COMM_IF_PUTC(*xyz.__chan, - ACK); - ZM_DEBUG(zm_dprintf - ("FINAL ACK (%d)\n", - __LINE__)); - } - xyz.at_eof = true; - break; - } - CYGACC_COMM_IF_PUTC(*xyz.__chan, - (xyz.crc_mode ? 'C' : NAK)); - xyz.total_retries++; - ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); - } - if (stat < 0) { - *err = stat; - xyz.len = -1; - return total; - } - } - /* Don't "read" data from the EOF protocol package */ - if (!xyz.at_eof) { - len = xyz.len; - if (size < len) - len = size; - memcpy(buf, xyz.bufp, len); - size -= len; - buf += len; - total += len; - xyz.len -= len; - xyz.bufp += len; - } - } - return total; -} - -void xyzModem_stream_close(int *err) -{ - diag_printf - ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets," - " %d retries\n", - xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX, - xyz.total_CAN, xyz.total_retries); - ZM_DEBUG(zm_flush()); -} - -/* Need to be able to clean out the input buffer, so have to take the */ -/* getc */ -void xyzModem_stream_terminate(bool abort, int (*getc) (void)) -{ - int c; - - if (abort) { - ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n")); - switch (xyz.mode) { - case xyzModem_xmodem: - case xyzModem_ymodem: - /* The X/YMODEM Spec seems to suggest that multiple CAN - * followed by an equal number of Backspaces is a - * friendly way to get the other end to abort. */ - CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN); - CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP); - CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP); - CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP); - CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP); - /* Now consume the rest of what's waiting on the line.*/ - ZM_DEBUG(zm_dprintf("Flushing serial line.\n")); - xyzModem_flush(); - xyz.at_eof = true; - break; -#ifdef xyzModem_zmodem - case xyzModem_zmodem: - /* Might support it some day I suppose. */ -#endif - break; - } - } else { - ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n")); - /* - * Consume any trailing crap left in the inbuffer from - * previous recieved blocks. Since very few files are an - * exact multiple of the transfer block size, there will - * almost always be some gunk here. - * If we don't eat it now, RedBoot will think the user typed it. - */ - ZM_DEBUG(zm_dprintf("Trailing gunk:\n")); - while ((c = (*getc) ()) > -1) ; - ZM_DEBUG(zm_dprintf("\n")); - /* - * Make a small delay to give terminal programs like minicom - * time to get control again after their file transfer program - * exits. - */ - CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000); - } -} - -char *xyzModem_error(int err) -{ - switch (err) { - case xyzModem_access: - return "Can't access file"; - break; - case xyzModem_noZmodem: - return "Sorry, zModem not available yet"; - break; - case xyzModem_timeout: - return "Timed out"; - break; - case xyzModem_eof: - return "End of file"; - break; - case xyzModem_cancel: - return "Cancelled"; - break; - case xyzModem_frame: - return "Invalid framing"; - break; - case xyzModem_cksum: - return "CRC/checksum error"; - break; - case xyzModem_sequence: - return "Block sequence error"; - break; - default: - return "Unknown error"; - break; - } -} - -/* - * RedBoot interface - */ -#if 0 /* SB */ -GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close, - xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error); -RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem); -RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem); -#endif diff --git a/include/xyzModem.h b/include/xyzModem.h deleted file mode 100644 index a3ea768..0000000 --- a/include/xyzModem.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - *========================================================================== - * - * xyzModem.h - * - * RedBoot stream handler for xyzModem protocol - * - *========================================================================== - *####ECOSGPLCOPYRIGHTBEGIN#### - * ------------------------------------------- - * This file is part of eCos, the Embedded Configurable Operating System. - * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. - * Copyright (C) 2002 Gary Thomas - * - * eCos is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 or (at your option) any later version. - * - * eCos is distributed in the hope that it will be useful, but WITHOUT ANY - * WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with eCos; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * As a special exception, if other files instantiate templates or use macros - * or inline functions from this file, or you compile this file and link it - * with other works to produce a work based on this file, this file does not - * by itself cause the resulting work to be covered by the GNU General Public - * License. However the source code for this file must still be made available - * in accordance with section (3) of the GNU General Public License. - * - * This exception does not invalidate any other reasons why a work based on - * this file might be covered by the GNU General Public License. - * - * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. - * at http: *sources.redhat.com/ecos/ecos-license/ - * ------------------------------------------- - *####ECOSGPLCOPYRIGHTEND#### - *========================================================================== - *#####DESCRIPTIONBEGIN#### - * - * Author(s): gthomas - * Contributors: gthomas - * Date: 2000-07-14 - * Purpose: - * Description: - * - * This code is part of RedBoot (tm). - * - *####DESCRIPTIONEND#### - * - *========================================================================== - */ - -#ifndef _XYZMODEM_H_ -#define _XYZMODEM_H_ - -#define xyzModem_xmodem 1 -#define xyzModem_ymodem 2 -/* Don't define this until the protocol support is in place */ -/*#define xyzModem_zmodem 3 */ - -#define xyzModem_access -1 -#define xyzModem_noZmodem -2 -#define xyzModem_timeout -3 -#define xyzModem_eof -4 -#define xyzModem_cancel -5 -#define xyzModem_frame -6 -#define xyzModem_cksum -7 -#define xyzModem_sequence -8 - -#define xyzModem_close 1 -#define xyzModem_abort 2 - - -#ifdef REDBOOT -extern getc_io_funcs_t xyzModem_io; -#else -#define CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT -#define CYGACC_CALL_IF_SET_CONSOLE_COMM(x) - -#define diag_vprintf vprintf -#define diag_printf printf -#define diag_vsprintf vsprintf - -#define CYGACC_CALL_IF_DELAY_US(x) udelay(x) - -typedef struct { - char *filename; - int mode; - int chan; -#ifdef CYGPKG_REDBOOT_NETWORKING - struct sockaddr_in *server; -#endif -} connection_info_t; - -#endif - - -int xyzModem_stream_open(connection_info_t *info, int *err); -void xyzModem_stream_close(int *err); -void xyzModem_stream_terminate(bool method, int (*getc)(void)); -int xyzModem_stream_read(char *buf, int size, int *err); -char *xyzModem_error(int err); - -#endif /* _XYZMODEM_H_ */ -- 1.7.10 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox