mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 3/4] at91sam9x5: add mci support
Date: Thu,  1 Nov 2012 22:16:55 +0100	[thread overview]
Message-ID: <1351804616-31047-3-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1351804616-31047-1-git-send-email-plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9x5.c         |    2 +
 arch/arm/mach-at91/at91sam9x5_devices.c |   62 +++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index a9065ff..7c7d997 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -207,6 +207,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci1", &mmc1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9x5_devices.c b/arch/arm/mach-at91/at91sam9x5_devices.c
index 710ded7..14fcb1e 100644
--- a/arch/arm/mach-at91/at91sam9x5_devices.c
+++ b/arch/arm/mach-at91/at91sam9x5_devices.c
@@ -123,6 +123,68 @@ void at91_add_device_eth(int id, struct at91_ether_platform_data *data)
 void at91_add_device_eth(int id, struct at91_ether_platform_data *data) {}
 #endif
 
+#if defined(CONFIG_MCI_ATMEL)
+/* Consider only one slot : slot 0 */
+void __init at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
+{
+	resource_size_t start = ~0;
+
+	if (!data)
+		return;
+
+	/* Must have at least one usable slot */
+	if (!data->bus_width)
+		return;
+
+	/* input/irq */
+	if (data->detect_pin) {
+		at91_set_gpio_input(data->detect_pin, 1);
+		at91_set_deglitch(data->detect_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		start = AT91SAM9X5_BASE_MCI0;
+
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA17, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA16, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA15, 1);
+		if (data->bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA18, 1);
+			at91_set_A_periph(AT91_PIN_PA19, 1);
+			at91_set_A_periph(AT91_PIN_PA20, 1);
+		}
+	} else {			/* MCI1 */
+		start = AT91SAM9X5_BASE_MCI1;
+
+		/* CLK */
+		at91_set_B_periph(AT91_PIN_PA13, 0);
+
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA12, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA11, 1);
+		if (data->bus_width == 4) {
+			at91_set_B_periph(AT91_PIN_PA2, 1);
+			at91_set_B_periph(AT91_PIN_PA3, 1);
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+		}
+	}
+
+	add_generic_device("atmel_mci", mmc_id, NULL, start, SZ_16K,
+			   IORESOURCE_MEM, data);
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
+#endif
+
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-11-01 21:19 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-01 19:50 [PATCH 0/4 v2] at91sam9x5ek: add spi and " Jean-Christophe PLAGNIOL-VILLARD
2012-11-01 21:16 ` [PATCH 1/4] at91sam9x5: add spi support Jean-Christophe PLAGNIOL-VILLARD
2012-11-01 21:16   ` [PATCH 2/4] at91sam9x5ek: " Jean-Christophe PLAGNIOL-VILLARD
2012-11-01 21:16   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-11-01 21:16   ` [PATCH 4/4] at91sam9x5ek: add mci support Jean-Christophe PLAGNIOL-VILLARD
2012-11-02  9:39 ` [PATCH 0/4 v2] at91sam9x5ek: add spi and " Jean-Christophe PLAGNIOL-VILLARD
  -- strict thread matches above, loose matches on Subject: below --
2012-11-03 11:34 [PATCH 0/4 v3] " Jean-Christophe PLAGNIOL-VILLARD
2012-11-03 11:36 ` [PATCH 1/4] at91sam9x5: add spi support Jean-Christophe PLAGNIOL-VILLARD
2012-11-03 11:36   ` [PATCH 3/4] at91sam9x5: add mci support Jean-Christophe PLAGNIOL-VILLARD
2012-11-01 19:30 [PATCH 0/4] at91sam9x5ek: add spi and " Jean-Christophe PLAGNIOL-VILLARD
2012-11-01 19:36 ` [PATCH 1/4] at91sam9x5: add spi support Jean-Christophe PLAGNIOL-VILLARD
2012-11-01 19:36   ` [PATCH 3/4] at91sam9x5: add mci support Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351804616-31047-3-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox