From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/4] i2c: adapter: register it's own device
Date: Fri, 2 Nov 2012 10:36:49 +0100 [thread overview]
Message-ID: <1351849012-26236-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20121102092718.GO29599@game.jcrosoft.org>
so we can show the this of i2c busses
set the bus device as parent of all devices.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/i2c/busses/i2c-imx.c | 20 ++++++++++----------
drivers/i2c/busses/i2c-omap.c | 30 +++++++++++++++---------------
drivers/i2c/i2c.c | 17 ++++++++++++++++-
include/i2c/i2c.h | 2 +-
4 files changed, 42 insertions(+), 27 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index a1012a7..7f9a2dc 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -154,7 +154,7 @@ static int i2c_fsl_bus_busy(struct i2c_adapter *adapter, int for_busy)
if (!for_busy && !(temp & I2SR_IBB))
break;
if (is_timeout(start, 500 * MSECOND)) {
- dev_err(adapter->dev,
+ dev_err(&adapter->dev,
"<%s> timeout waiting for I2C bus %s\n",
__func__,for_busy ? "busy" : "not busy");
return -EIO;
@@ -177,7 +177,7 @@ static int i2c_fsl_trx_complete(struct i2c_adapter *adapter)
break;
if (is_timeout(start, 100 * MSECOND)) {
- dev_err(adapter->dev, "<%s> TXR timeout\n", __func__);
+ dev_err(&adapter->dev, "<%s> TXR timeout\n", __func__);
return -EIO;
}
}
@@ -199,7 +199,7 @@ static int i2c_fsl_acked(struct i2c_adapter *adapter)
break;
if (is_timeout(start, MSECOND)) {
- dev_dbg(adapter->dev, "<%s> No ACK\n", __func__);
+ dev_dbg(&adapter->dev, "<%s> No ACK\n", __func__);
return -EIO;
}
}
@@ -368,9 +368,9 @@ static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
(500000U * i2c_clk_div[i][0] + (i2c_clk_rate / 2) - 1) /
(i2c_clk_rate / 2);
- dev_dbg(i2c_fsl->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
+ dev_dbg(&i2c_fsl->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
__func__, i2c_clk_rate, div);
- dev_dbg(i2c_fsl->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
+ dev_dbg(&i2c_fsl->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
__func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
}
#endif
@@ -382,7 +382,7 @@ static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
int i, result;
if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
- dev_dbg(adapter->dev,
+ dev_dbg(&adapter->dev,
"<%s> write slave address: addr=0x%02x\n",
__func__, msgs->addr << 1);
@@ -399,7 +399,7 @@ static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
/* write data */
for (i = 0; i < msgs->len; i++) {
- dev_dbg(adapter->dev,
+ dev_dbg(&adapter->dev,
"<%s> write byte: B%d=0x%02X\n",
__func__, i, msgs->buf[i]);
writeb(msgs->buf[i], base + FSL_I2C_I2DR);
@@ -425,7 +425,7 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
writeb(0x0, base + FSL_I2C_I2SR);
if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
- dev_dbg(adapter->dev,
+ dev_dbg(&adapter->dev,
"<%s> write slave address: addr=0x%02x\n",
__func__, (msgs->addr << 1) | 0x01);
@@ -478,7 +478,7 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
}
msgs->buf[i] = readb(base + FSL_I2C_I2DR);
- dev_dbg(adapter->dev, "<%s> read byte: B%d=0x%02X\n",
+ dev_dbg(&adapter->dev, "<%s> read byte: B%d=0x%02X\n",
__func__, i, msgs->buf[i]);
}
return 0;
@@ -544,7 +544,7 @@ static int __init i2c_fsl_probe(struct device_d *pdev)
/* Setup i2c_fsl driver structure */
i2c_fsl->adapter.master_xfer = i2c_fsl_xfer;
i2c_fsl->adapter.nr = pdev->id;
- i2c_fsl->adapter.dev = pdev;
+ i2c_fsl->adapter.dev.parent = pdev;
i2c_fsl->base = dev_request_mem_region(pdev, 0);
i2c_fsl->dfsrr = -1;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 24961eb..f371875 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -318,7 +318,7 @@ static int omap_i2c_init(struct omap_i2c_struct *i2c_omap)
while (!(omap_i2c_read_reg(i2c_omap, OMAP_I2C_SYSS_REG) &
SYSS_RESETDONE_MASK)) {
if (is_timeout(start, MSECOND)) {
- dev_warn(i2c_omap->adapter.dev, "timeout waiting "
+ dev_warn(&i2c_omap->adapter.dev, "timeout waiting "
"for controller reset\n");
return -ETIMEDOUT;
}
@@ -453,7 +453,7 @@ static int omap_i2c_wait_for_bb(struct i2c_adapter *adapter)
start = get_time_ns();
while (omap_i2c_read_reg(i2c_omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
if (is_timeout(start, MSECOND)) {
- dev_warn(adapter->dev, "timeout waiting for bus ready\n");
+ dev_warn(&adapter->dev, "timeout waiting for bus ready\n");
return -ETIMEDOUT;
}
}
@@ -476,9 +476,9 @@ omap_i2c_isr(struct omap_i2c_struct *dev)
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
- dev_dbg(dev->adapter.dev, "IRQ (ISR = 0x%04x)\n", stat);
+ dev_dbg(&dev->adapter.dev, "IRQ (ISR = 0x%04x)\n", stat);
if (count++ == 100) {
- dev_warn(dev->adapter.dev, "Too much work in one IRQ\n");
+ dev_warn(&dev->adapter.dev, "Too much work in one IRQ\n");
break;
}
@@ -499,7 +499,7 @@ complete:
OMAP_I2C_CON_STP);
}
if (stat & OMAP_I2C_STAT_AL) {
- dev_err(dev->adapter.dev, "Arbitration lost\n");
+ dev_err(&dev->adapter.dev, "Arbitration lost\n");
err |= OMAP_I2C_STAT_AL;
}
if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
@@ -536,11 +536,11 @@ complete:
}
} else {
if (stat & OMAP_I2C_STAT_RRDY)
- dev_err(dev->adapter.dev,
+ dev_err(&dev->adapter.dev,
"RRDY IRQ while no data"
" requested\n");
if (stat & OMAP_I2C_STAT_RDR)
- dev_err(dev->adapter.dev,
+ dev_err(&dev->adapter.dev,
"RDR IRQ while no data"
" requested\n");
break;
@@ -577,11 +577,11 @@ complete:
}
} else {
if (stat & OMAP_I2C_STAT_XRDY)
- dev_err(dev->adapter.dev,
+ dev_err(&dev->adapter.dev,
"XRDY IRQ while no "
"data to send\n");
if (stat & OMAP_I2C_STAT_XDR)
- dev_err(dev->adapter.dev,
+ dev_err(&dev->adapter.dev,
"XDR IRQ while no "
"data to send\n");
break;
@@ -613,11 +613,11 @@ complete:
continue;
}
if (stat & OMAP_I2C_STAT_ROVR) {
- dev_err(dev->adapter.dev, "Receive overrun\n");
+ dev_err(&dev->adapter.dev, "Receive overrun\n");
dev->cmd_err |= OMAP_I2C_STAT_ROVR;
}
if (stat & OMAP_I2C_STAT_XUDF) {
- dev_err(dev->adapter.dev, "Transmit underflow\n");
+ dev_err(&dev->adapter.dev, "Transmit underflow\n");
dev->cmd_err |= OMAP_I2C_STAT_XUDF;
}
}
@@ -639,7 +639,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adapter,
int ret = 0;
- dev_dbg(adapter->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
+ dev_dbg(&adapter->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
msg->addr, msg->len, msg->flags, stop);
if (msg->len == 0)
@@ -687,7 +687,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adapter,
/* Let the user know if i2c is in a bad state */
if (is_timeout(start, MSECOND)) {
- dev_err(adapter->dev, "controller timed out "
+ dev_err(&adapter->dev, "controller timed out "
"waiting for start condition to finish\n");
return -ETIMEDOUT;
}
@@ -707,7 +707,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adapter,
while (ret){
ret = omap_i2c_isr(i2c_omap);
if (is_timeout(start, MSECOND)) {
- dev_err(adapter->dev,
+ dev_err(&adapter->dev,
"timed out on polling for "
"open i2c message handling\n");
return -ETIMEDOUT;
@@ -835,7 +835,7 @@ i2c_omap_probe(struct device_d *pdev)
i2c_omap->adapter.master_xfer = omap_i2c_xfer,
i2c_omap->adapter.nr = pdev->id;
- i2c_omap->adapter.dev = pdev;
+ i2c_omap->adapter.dev.parent = pdev;
/* i2c device drivers may be active on return from add_adapter() */
r = i2c_add_numbered_adapter(&i2c_omap->adapter);
diff --git a/drivers/i2c/i2c.c b/drivers/i2c/i2c.c
index 27fd256..3af5c32 100644
--- a/drivers/i2c/i2c.c
+++ b/drivers/i2c/i2c.c
@@ -80,7 +80,7 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
*/
for (ret = 0; ret < num; ret++) {
- dev_dbg(adap->dev, "master_xfer[%d] %c, addr=0x%02x, "
+ dev_dbg(&adap->dev, "master_xfer[%d] %c, addr=0x%02x, "
"len=%d\n", ret, (msgs[ret].flags & I2C_M_RD)
? 'R' : 'W', msgs[ret].addr, msgs[ret].len);
}
@@ -256,6 +256,9 @@ struct i2c_client *i2c_new_device(struct i2c_adapter *adapter,
client->adapter = adapter;
client->addr = chip->addr;
+ client->dev.parent = &adapter->dev;
+ dev_add_child(client->dev.parent, &client->dev);
+
status = register_device(&client->dev);
#if 0
@@ -363,9 +366,21 @@ struct i2c_adapter *i2c_get_adapter(int busnum)
*/
int i2c_add_numbered_adapter(struct i2c_adapter *adapter)
{
+ int ret;
+
if (i2c_get_adapter(adapter->nr))
return -EBUSY;
+ adapter->dev.id = adapter->nr;
+ strcpy(adapter->dev.name, "i2c");
+
+ if (adapter->dev.parent)
+ dev_add_child(adapter->dev.parent, &adapter->dev);
+
+ ret = register_device(&adapter->dev);
+ if (ret)
+ return ret;
+
list_add_tail(&adapter->list, &adapter_list);
/* populate children from any i2c device tables */
diff --git a/include/i2c/i2c.h b/include/i2c/i2c.h
index de2a7ea..5021dd4 100644
--- a/include/i2c/i2c.h
+++ b/include/i2c/i2c.h
@@ -66,7 +66,7 @@ struct i2c_msg {
*
*/
struct i2c_adapter {
- struct device_d *dev; /* ptr to device */
+ struct device_d dev; /* ptr to device */
int nr; /* bus number */
int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
struct list_head list;
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-11-02 9:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-02 9:27 [PATCH 0/4 v2] i2c: add algo-bit support with gpio and versatile support Jean-Christophe PLAGNIOL-VILLARD
2012-11-02 9:36 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-11-02 9:36 ` [PATCH 2/4] i2c: add i2c algo bit support Jean-Christophe PLAGNIOL-VILLARD
2012-11-02 9:36 ` [PATCH 3/4] i2c: add i2c-gpio support Jean-Christophe PLAGNIOL-VILLARD
2012-11-02 9:36 ` [PATCH 4/4] i2c: add versatile support Jean-Christophe PLAGNIOL-VILLARD
2012-11-02 10:27 ` [PATCH 0/4 v2] i2c: add algo-bit support with gpio and " Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2012-11-01 9:42 [PATCH 0/4] " Jean-Christophe PLAGNIOL-VILLARD
2012-11-01 9:44 ` [PATCH 1/4] i2c: adapter: register it's own device Jean-Christophe PLAGNIOL-VILLARD
2012-11-02 7:29 ` Sascha Hauer
2012-11-02 9:24 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351849012-26236-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox