From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/2] bus: add bus device
Date: Sat, 3 Nov 2012 16:11:05 +0100 [thread overview]
Message-ID: <1351955465-12206-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1351955465-12206-1-git-send-email-plagnioj@jcrosoft.com>
automatically add it as parent of any bus device if none already specified
we have now a nice output per bus
barebox@Atmel at91sam9x5-ek:/
devices:
`---- platform
`---- atmel_usart0
`---- cs0
`---- atmel_usart1
`---- cs1
`---- mem0
`---- 0x00000000-0x07ffffff: /dev/ram0
`---- mem1
`---- 0x00000000-0x00007fff: /dev/sram0
`---- mem2
`---- 0x00000000-0x000037bf: /dev/defaultenv
`---- mem3
`---- 0x00000000-0xfffffffe: /dev/mem
`---- cs2
`---- w1-gpio
`---- w1_bus0
`---- w1-2d-0
`---- 0x00000000-0x0000007f: /dev/ds24310
`---- w1-2d-1
`---- 0x00000000-0x0000007f: /dev/ds24311
`---- w1-23-0
`---- 0x00000000-0x000001ff: /dev/ds24330
`---- at91sam9x5cm
`---- at91sam9x5ek
`---- at91sam9x5dm
`---- atmel_nand0
`---- nand0
`---- 0x00000000-0x1fffffff: /dev/nand0
`---- 0x00000000-0x0003ffff: /dev/at91bootstrap_raw
`---- 0x00040000-0x0009ffff: /dev/self_raw
`---- 0x000a0000-0x000bffff: /dev/env_raw
`---- 0x000c0000-0x000dffff: /dev/env_raw1
`---- 0x00000000-0x0003ffff: /dev/nand0.at91bootstrap
`---- 0x00040000-0x0009ffff: /dev/nand0.barebox
`---- 0x000a0000-0x000bffff: /dev/nand0.bareboxenv
`---- 0x000c0000-0x000dffff: /dev/nand0.bareboxenv2
`---- 0x000e0000-0x000fffff: /dev/nand0.oftree
`---- 0x00100000-0x001fffff: /dev/nand0.free
`---- 0x00200000-0x007fffff: /dev/nand0.kernel
`---- 0x00800000-0x07ffffff: /dev/nand0.rootfs
`---- 0x08000000-0x1fffffff: /dev/nand0.data
`---- macb0
`---- miibus0
`---- eth0
`---- atmel_spi0
`---- mtd_dataflash0
`---- dataflash0
`---- 0x00000000-0x0041ffff: /dev/dataflash0
`---- atmel_mci0
`---- mci0
`---- 0x00000000-0x1d9bfffff: /dev/disk0
`---- 0x00100000-0x064fffff: /dev/disk0.0
`---- 0x06500000-0x1d9bfffff: /dev/disk0.1
`---- i2c-gpio0
`---- i2c0
`---- qt10700
`---- cs3
`---- mdio_bus
`---- spi
`---- i2c
`---- w1_bus
`---- fs
`---- ramfs0
`---- devfs0
`---- net
`---- global
drivers:
atmel_usart
ramfs
devfs
fat
macb
Generic PHY
atmel_nand
mtd_dataflash
m25p80
atmel_spi
i2c-gpio
mci
atmel_mci
qt1070
w1-gpio
ds2431
ds2433
mem
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/base/bus.c | 10 ++++++++++
drivers/base/driver.c | 5 +++++
include/driver.h | 2 ++
3 files changed, 17 insertions(+)
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 69782d2..e2204da 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -25,9 +25,19 @@ static struct bus_type *get_bus_by_name(const char *name)
int bus_register(struct bus_type *bus)
{
+ int ret;
+
if (get_bus_by_name(bus->name))
return -EEXIST;
+ strcpy(bus->dev.name, bus->name);
+ bus->dev.id = DEVICE_ID_SINGLE;
+
+ ret = register_device(&bus->dev);
+ if (ret)
+ return ret;
+
+
INIT_LIST_HEAD(&bus->device_list);
INIT_LIST_HEAD(&bus->driver_list);
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 64fe289..eaedac7 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -120,6 +120,11 @@ int register_device(struct device_d *new_device)
if (!new_device->bus)
return 0;
+ if (!new_device->parent) {
+ new_device->parent = &new_device->bus->dev;
+ dev_add_child(new_device->parent, new_device);
+ }
+
list_add_tail(&new_device->bus_list, &new_device->bus->device_list);
bus_for_each_driver(new_device->bus, drv) {
diff --git a/include/driver.h b/include/driver.h
index dd22c77..5d433ec 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -378,6 +378,8 @@ struct bus_type {
int (*probe)(struct device_d *dev);
void (*remove)(struct device_d *dev);
+ struct device_d dev;
+
struct list_head list;
struct list_head device_list;
struct list_head driver_list;
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-11-03 15:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-03 15:08 [PATCH 0/2 v2] " Jean-Christophe PLAGNIOL-VILLARD
2012-11-03 15:11 ` [PATCH 1/2] bus_for_each_device/bus_for_each_driver: add () to allow use &bus Jean-Christophe PLAGNIOL-VILLARD
2012-11-03 15:11 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-11-15 10:11 ` [PATCH 0/2 v2] add bus device Jean-Christophe PLAGNIOL-VILLARD
2012-11-19 10:36 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351955465-12206-2-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox