From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 12.mo3.mail-out.ovh.net ([188.165.41.191] helo=mo3.mail-out.ovh.net) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TYMni-0003AE-1v for barebox@lists.infradead.org; Tue, 13 Nov 2012 20:09:46 +0000 Received: from mail417.ha.ovh.net (b6.ovh.net [213.186.33.56]) by mo3.mail-out.ovh.net (Postfix) with SMTP id 958CCFF9435 for ; Tue, 13 Nov 2012 21:20:16 +0100 (CET) From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 13 Nov 2012 21:07:18 +0100 Message-Id: <1352837241-16777-1-git-send-email-plagnioj@jcrosoft.com> In-Reply-To: <20121113200248.GG25679@game.jcrosoft.org> References: <20121113200248.GG25679@game.jcrosoft.org> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/4] mci_spi: always compute command crc byte To: barebox@lists.infradead.org From: Franck Jullien The spec says: "the CMD8 CRC verification is always enabled. The Host shall set correct CRC in the argument ofCMD8. If CRC error is detected, card returns CRC error in R1 response regardless of command index." Make it simple, and compute crc on every commands. Signed-off-by: Franck Jullien --- drivers/mci/Kconfig | 2 +- drivers/mci/mci_spi.c | 12 ------------ 2 files changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index b1a678e..5c0ca4d 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -88,6 +88,7 @@ config MCI_ATMEL config MCI_SPI bool "MMC/SD over SPI" + select CRC7 depends on SPI help Some systems access MMC/SD/SDIO cards using a SPI controller @@ -98,7 +99,6 @@ config MCI_SPI config MMC_SPI_CRC_ON bool "Enable CRC protection for transfers" - select CRC7 select CRC16 depends on MCI_SPI help diff --git a/drivers/mci/mci_spi.c b/drivers/mci/mci_spi.c index 5894104..cb5e0bb 100644 --- a/drivers/mci/mci_spi.c +++ b/drivers/mci/mci_spi.c @@ -121,14 +121,6 @@ mmc_spi_writebytes(struct mmc_spi_host *host, unsigned len, void *data) return status; } -/* - * Note that while the CRC, in general, is ignored in SPI mode, the very first - * command must be followed by a valid CRC, since the card is not yet in SPI mode. - * The CRC byte for a CMD0 command with a zero argument is a constant 0x4A. For - * simplicity, this CRC byte is always sent with every command. - */ -#define MMC_SPI_CMD0_CRC ((0x4a << 1) | 0x1) - static int mmc_spi_command_send(struct mmc_spi_host *host, struct mci_cmd *cmd) { uint8_t r1; @@ -141,11 +133,7 @@ static int mmc_spi_command_send(struct mmc_spi_host *host, struct mci_cmd *cmd) command[3] = cmd->cmdarg >> 16; command[4] = cmd->cmdarg >> 8; command[5] = cmd->cmdarg; -#ifdef CONFIG_MMC_SPI_CRC_ON command[6] = (crc7(0, &command[1], 5) << 1) | 0x01; -#else - command[6] = MMC_SPI_CMD0_CRC; -#endif mmc_spi_writebytes(host, 7, command); -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox