[PATCH 1/2] ata: Add i.MX PATA driver support

* [PATCH 1/2] ata: Add i.MX PATA driver support
@ 2012-12-03 10:36 Sascha Hauer
  2012-12-03 10:36 ` [PATCH 2/2] ARM i.MX: Add i.MX51 PATA device support Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Sascha Hauer @ 2012-12-03 10:36 UTC (permalink / raw)
  To: barebox

Straight forward driver, we only have to configure some additional
bits and then use the generic ide support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/ata/Kconfig    |    7 ++
 drivers/ata/Makefile   |    1 +
 drivers/ata/pata-imx.c |  203 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 211 insertions(+)
 create mode 100644 drivers/ata/pata-imx.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index fe6f5e6..459fac3 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -39,4 +39,11 @@ config DISK_INTF_PLATFORM_IDE
 	  Generic platform driver for simple IDE like interfaces to a connected
 	  ATA device.
 
+config DISK_PATA_IMX
+	bool "i.MX PATA driver"
+	depends on ARCH_IMX
+	select DISK_ATA
+	help
+	  select this to enable support for the i.MX PATA driver
+
 endif
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 2560076..eaeddae 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_DISK_ATA) += disk_ata_drive.o
 # interface types
 
 obj-$(CONFIG_DISK_INTF_PLATFORM_IDE) += intf_platform_ide.o
+obj-$(CONFIG_DISK_PATA_IMX) += pata-imx.o
diff --git a/drivers/ata/pata-imx.c b/drivers/ata/pata-imx.c
new file mode 100644
index 0000000..29531cb
--- /dev/null
+++ b/drivers/ata/pata-imx.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2011 Juergen Beisert, Pengutronix
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix
+ *
+ * Derived from the Linux kernel: Generic platform device PATA driver
+ *  Copyright (C) 2006 - 2007  Paul Mundt
+ *  Based on pata_pcmcia:
+ *  Copyright 2005-2006 Red Hat Inc, all rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <xfuncs.h>
+#include <malloc.h>
+#include <errno.h>
+#include <ata_drive.h>
+#include <platform_ide.h>
+#include <io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define PATA_IMX_ATA_TIME_OFF		0x0
+#define PATA_IMX_ATA_TIME_ON		0x1
+#define PATA_IMX_ATA_TIME_1		0x2
+#define PATA_IMX_ATA_TIME_2W		0x3
+#define PATA_IMX_ATA_TIME_2R		0x4
+#define PATA_IMX_ATA_TIME_AX		0x5
+#define PATA_IMX_ATA_TIME_PIO_RDX	0x6
+#define PATA_IMX_ATA_TIME_4		0x7
+#define PATA_IMX_ATA_TIME_9		0x8
+#define PATA_IMX_ATA_TIME_M		0x9
+#define PATA_IMX_ATA_TIME_JN		0xa
+#define PATA_IMX_ATA_TIME_D		0xb
+#define PATA_IMX_ATA_TIME_K		0xc
+#define PATA_IMX_ATA_TIME_ACK		0xd
+#define PATA_IMX_ATA_TIME_ENV		0xe
+#define PATA_IMX_ATA_TIME_UDMA_RDX	0xf
+#define PATA_IMX_ATA_TIME_ZAH		0x10
+#define PATA_IMX_ATA_TIME_MLIX		0x11
+#define PATA_IMX_ATA_TIME_DVH		0x12
+#define PATA_IMX_ATA_TIME_DZFS		0x13
+#define PATA_IMX_ATA_TIME_DVS		0x14
+#define PATA_IMX_ATA_TIME_CVH		0x15
+#define PATA_IMX_ATA_TIME_SS		0x16
+#define PATA_IMX_ATA_TIME_CYC		0x17
+#define PATA_IMX_ATA_CONTROL		0x24
+#define PATA_IMX_ATA_CTRL_FIFO_RST_B	(1<<7)
+#define PATA_IMX_ATA_CTRL_ATA_RST_B	(1<<6)
+#define PATA_IMX_ATA_CTRL_IORDY_EN	(1<<0)
+#define PATA_IMX_ATA_INT_EN		0x2C
+#define PATA_IMX_ATA_INTR_ATA_INTRQ2	(1<<3)
+#define PATA_IMX_DRIVE_DATA		0xA0
+#define PATA_IMX_DRIVE_CONTROL		0xD8
+
+static uint16_t pio_t1[]    = { 70,  50,  30,  30,  25 };
+static uint16_t pio_t2_8[]  = { 290, 290, 290, 80,  70 };
+static uint16_t pio_t4[]    = { 30,  20,  15,  10,  10 };
+static uint16_t pio_t9[]    = { 20,  15,  10,  10,  10 };
+static uint16_t pio_tA[]    = { 50,  50,  50,  50,  50 };
+
+static void pata_imx_set_bus_timing(void __iomem *base, unsigned long clkrate,
+		unsigned char mode)
+{
+	uint32_t T = 1000000000 / clkrate;
+
+	struct mxc_ata_config_regs *ata_regs;
+	ata_regs = (struct mxc_ata_config_regs *)base;
+
+	if (mode >= ARRAY_SIZE(pio_t1))
+		return;
+
+	/* Write TIME_OFF/ON/1/2W */
+	writeb(3,  base + PATA_IMX_ATA_TIME_OFF);
+	writeb(3,  base + PATA_IMX_ATA_TIME_ON);
+	writeb((pio_t1[mode] + T) / T, base + PATA_IMX_ATA_TIME_1);
+	writeb((pio_t2_8[mode] + T) / T, base + PATA_IMX_ATA_TIME_2W);
+
+	/* Write TIME_2R/AX/RDX/4 */
+	writeb((pio_t2_8[mode] + T) / T,  base + PATA_IMX_ATA_TIME_2R);
+	writeb((pio_tA[mode] + T) / T + 2,  base + PATA_IMX_ATA_TIME_AX);
+	writeb(1,  base + PATA_IMX_ATA_TIME_PIO_RDX);
+	writeb((pio_t4[mode] + T) / T,  base + PATA_IMX_ATA_TIME_4);
+
+	/* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */
+	writeb((pio_t9[mode] + T) / T,  base + PATA_IMX_ATA_TIME_9);
+}
+
+/**
+ * Setup the register specific addresses for an ATA like divice
+ * @param reg_base Base address of the standard ATA like registers
+ * @param alt_base Base address of the alternate ATA like registers
+ * @param ioaddr Register file structure to setup
+ * @param shift Shift offset between registers
+ *
+ * Some of the registers have different names but use the same offset. This is
+ * due to the fact read or write access at the same offset reaches different
+ * registers.
+ */
+static void imx_pata_setup_port(void *reg_base, void *alt_base,
+			struct ata_ioports *ioaddr, unsigned shift)
+{
+	/* standard registers (0 ... 7) */
+	ioaddr->cmd_addr = reg_base;
+
+	ioaddr->data_addr = reg_base + (IDE_REG_DATA << shift);
+
+	ioaddr->error_addr = reg_base + (IDE_REG_ERR << shift);
+	ioaddr->feature_addr = reg_base + (IDE_REG_FEATURE << shift);
+
+	ioaddr->nsect_addr = reg_base + (IDE_REG_NSECT << shift);
+
+	ioaddr->lbal_addr = reg_base + (IDE_REG_LBAL << shift);
+
+	ioaddr->lbam_addr = reg_base + (IDE_REG_LBAM << shift);
+
+	ioaddr->lbah_addr = reg_base + (IDE_REG_LBAH << shift);
+
+	ioaddr->device_addr = reg_base + (IDE_REG_DEVICE << shift);
+
+	ioaddr->status_addr = reg_base + (IDE_REG_STATUS << shift);
+	ioaddr->command_addr = reg_base + (IDE_REG_CMD << shift);
+
+	if (alt_base) {
+		ioaddr->altstatus_addr = alt_base + (IDE_REG_ALT_STATUS << shift);
+		ioaddr->ctl_addr = alt_base + (IDE_REG_DEV_CTL << shift);
+
+		ioaddr->alt_dev_addr = alt_base + (IDE_REG_DRV_ADDR << shift);
+	} else {
+		ioaddr->altstatus_addr = ioaddr->status_addr;
+		ioaddr->ctl_addr = ioaddr->status_addr;
+		/* ioaddr->alt_dev_addr not used in driver */
+	}
+}
+
+static int imx_pata_probe(struct device_d *dev)
+{
+	struct ata_ioports *io;
+	struct clk *clk;
+	void __iomem *base;
+	int ret;
+
+	io = xzalloc(sizeof(struct ata_ioports));
+	base = dev_request_mem_region(dev, 0);
+
+	clk = clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto out_free;
+	}
+
+	imx_pata_setup_port(base + PATA_IMX_DRIVE_DATA,
+			base + PATA_IMX_DRIVE_CONTROL, io, 2);
+
+	/* deassert resets */
+	writel(PATA_IMX_ATA_CTRL_FIFO_RST_B |
+			PATA_IMX_ATA_CTRL_ATA_RST_B,
+			base + PATA_IMX_ATA_CONTROL);
+
+	pata_imx_set_bus_timing(base, clk_get_rate(clk), 4);
+
+	ret= register_ata_drive(dev, io);
+	if (ret) {
+		dev_err(dev, "Cannot register IDE interface: %s\n",
+				strerror(-ret));
+		goto out_free_clk;
+	}
+
+	return 0;
+
+out_free_clk:
+	clk_put(clk);
+
+out_free:
+	free(io);
+
+	return ret;
+}
+
+static struct driver_d imx_pata_driver = {
+	.name   = "imx-pata",
+	.probe  = imx_pata_probe,
+};
+
+static int imx_pata_init(void)
+{
+	return platform_driver_register(&imx_pata_driver);
+}
+
+device_initcall(imx_pata_init);
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread