From: Wolfram Sang <w.sang@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Wolfram Sang <w.sang@pengutronix.de>
Subject: [PATCH] mtd: nand: mxs: reset BCH earlier to avoid NAND startup problems
Date: Wed, 5 Dec 2012 15:53:53 +0100 [thread overview]
Message-ID: <1354719233-28847-1-git-send-email-w.sang@pengutronix.de> (raw)
It could happen (1 out of 100 times) that NAND did not start up
correctly after warm rebooting, so barebox could not find its
environment or DMA timed out due to a stalled BCH. When resetting BCH
together with GPMI, the issue could not be observed anymore. We probably
need the consistent state already before sending commands to NAND.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---
drivers/mtd/nand/nand_mxs.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/nand_mxs.c b/drivers/mtd/nand/nand_mxs.c
index 975a44f..c4509d3 100644
--- a/drivers/mtd/nand/nand_mxs.c
+++ b/drivers/mtd/nand/nand_mxs.c
@@ -1128,6 +1128,7 @@ int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info)
int mxs_nand_hw_init(struct mxs_nand_info *info)
{
void __iomem *gpmi_regs = (void *)MXS_GPMI_BASE;
+ void __iomem *bch_regs = (void __iomem *)MXS_BCH_BASE;
int i = 0, ret;
u32 val;
@@ -1153,6 +1154,15 @@ int mxs_nand_hw_init(struct mxs_nand_info *info)
if (ret)
return ret;
+ val = readl(gpmi_regs + GPMI_VERSION);
+ info->version = val >> GPMI_VERSION_MINOR_OFFSET;
+
+ /* Reset BCH. Don't use SFTRST on MX23 due to Errata #2847 */
+ ret = mxs_reset_block(bch_regs + BCH_CTRL,
+ info->version == GPMI_VERSION_TYPE_MX23);
+ if (ret)
+ return ret;
+
/*
* Choose NAND mode, set IRQ polarity, disable write protection and
* select BCH ECC.
@@ -1163,9 +1173,6 @@ int mxs_nand_hw_init(struct mxs_nand_info *info)
GPMI_CTRL1_BCH_MODE;
writel(val, gpmi_regs + GPMI_CTRL1);
- val = readl(gpmi_regs + GPMI_VERSION);
- info->version = val >> GPMI_VERSION_MINOR_OFFSET;
-
return 0;
err2:
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-12-05 14:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-05 14:53 Wolfram Sang [this message]
2012-12-05 18:37 ` Sascha Hauer
2012-12-05 18:42 ` Wolfram Sang
2012-12-05 18:50 ` Sascha Hauer
2012-12-05 19:02 ` [PATCH V2] mtd: nand: mxs: reset BCH earlier, too, " Wolfram Sang
2012-12-06 7:43 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1354719233-28847-1-git-send-email-w.sang@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox