* [PATCH] beaglebone: add first-stage support for AM335x and board
@ 2012-12-11 15:15 Jan Luebbe
0 siblings, 0 replies; only message in thread
From: Jan Luebbe @ 2012-12-11 15:15 UTC (permalink / raw)
To: barebox
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
arch/arm/Makefile | 1 +
arch/arm/boards/beaglebone/Makefile | 1 +
arch/arm/boards/beaglebone/board.c | 366 ++++++++++++++
arch/arm/boards/beaglebone/config.h | 17 +
arch/arm/boards/beaglebone/env/boot/sd | 11 +
arch/arm/boards/beaglebone/env/config | 21 +
arch/arm/boards/beaglebone/mlo-env/bin/boot | 143 ++++++
arch/arm/boards/beaglebone/mlo-env/config | 51 ++
arch/arm/configs/am335x_beaglebone_defconfig | 54 +++
.../configs/am335x_beaglebone_mlo_large_defconfig | 47 ++
.../configs/am335x_beaglebone_mlo_small_defconfig | 29 ++
arch/arm/mach-omap/Kconfig | 11 +-
arch/arm/mach-omap/Makefile | 2 +-
arch/arm/mach-omap/am33xx_clock.c | 289 +++++++++++
arch/arm/mach-omap/am33xx_generic.c | 74 +++
arch/arm/mach-omap/am33xx_mux.c | 502 ++++++++++++++++++++
arch/arm/mach-omap/include/mach/am33xx-clock.h | 172 +++++++
arch/arm/mach-omap/include/mach/am33xx-mux.h | 22 +
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 154 +++++-
arch/arm/mach-omap/include/mach/xload.h | 1 +
arch/arm/mach-omap/xload.c | 4 +-
21 files changed, 1968 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boards/beaglebone/Makefile
create mode 100644 arch/arm/boards/beaglebone/board.c
create mode 100644 arch/arm/boards/beaglebone/config.h
create mode 100644 arch/arm/boards/beaglebone/env/boot/sd
create mode 100644 arch/arm/boards/beaglebone/env/config
create mode 100644 arch/arm/boards/beaglebone/mlo-env/bin/boot
create mode 100644 arch/arm/boards/beaglebone/mlo-env/config
create mode 100644 arch/arm/configs/am335x_beaglebone_defconfig
create mode 100644 arch/arm/configs/am335x_beaglebone_mlo_large_defconfig
create mode 100644 arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
create mode 100644 arch/arm/mach-omap/am33xx_clock.c
create mode 100644 arch/arm/mach-omap/am33xx_mux.c
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-mux.h
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 8cef771..0feb025 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -102,6 +102,7 @@ board-$(CONFIG_MACH_NOMADIK_8815NHK) := nhk8815
board-$(CONFIG_MACH_NXDB500) := netx
board-$(CONFIG_MACH_OMAP343xSDP) := omap343xdsp
board-$(CONFIG_MACH_BEAGLE) := beagle
+board-$(CONFIG_MACH_BEAGLEBONE) := beaglebone
board-$(CONFIG_MACH_OMAP3EVM) := omap3evm
board-$(CONFIG_MACH_PANDA) := panda
board-$(CONFIG_MACH_ARCHOSG9) := archosg9
diff --git a/arch/arm/boards/beaglebone/Makefile b/arch/arm/boards/beaglebone/Makefile
new file mode 100644
index 0000000..dcfc293
--- /dev/null
+++ b/arch/arm/boards/beaglebone/Makefile
@@ -0,0 +1 @@
+obj-y += board.o
diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
new file mode 100644
index 0000000..fd975c4
--- /dev/null
+++ b/arch/arm/boards/beaglebone/board.c
@@ -0,0 +1,366 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Raghavendra KH <r-khandenahally@ti.com>
+ *
+ * Copyright (C) 2012 Jan Luebbe <j.luebbe@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ * @brief BeagleBone Specific Board Initialization routines
+ */
+
+#include <common.h>
+#include <console.h>
+#include <init.h>
+#include <driver.h>
+#include <fs.h>
+#include <linux/stat.h>
+#include <environment.h>
+#include <sizes.h>
+#include <io.h>
+#include <ns16550.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <mach/silicon.h>
+#include <mach/clocks.h>
+#include <mach/sdrc.h>
+#include <mach/sys_info.h>
+#include <mach/syslib.h>
+#include <mach/control.h>
+#include <mach/gpmc.h>
+#include <mach/ehci.h>
+#include <i2c/i2c.h>
+#include <linux/err.h>
+#include <usb/ehci.h>
+#include <mach/xload.h>
+#include <mach/am33xx-mux.h>
+
+/* UART Defines */
+#define UART_SYSCFG_OFFSET (0x54)
+#define UART_SYSSTS_OFFSET (0x58)
+
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+/* AM335X EMIF Register values */
+#define EMIF_SDMGT 0x80000000
+#define EMIF_SDRAM 0x00004650
+#define EMIF_PHYCFG 0x2
+#define DDR_PHY_RESET (0x1 << 10)
+#define DDR_FUNCTIONAL_MODE_EN 0x1
+#define DDR_PHY_READY (0x1 << 2)
+#define VTP_CTRL_READY (0x1 << 5)
+#define VTP_CTRL_ENABLE (0x1 << 6)
+#define VTP_CTRL_LOCK_EN (0x1 << 4)
+#define VTP_CTRL_START_EN (0x1)
+#define DDR2_RATIO 0x80 /* for mDDR */
+#define CMD_FORCE 0x00 /* common #def */
+#define CMD_DELAY 0x00
+
+#define EMIF_READ_LATENCY 0x05
+#define EMIF_TIM1 0x0666B3D6
+#define EMIF_TIM2 0x143731DA
+#define EMIF_TIM3 0x00000347
+#define EMIF_SDCFG 0x43805332
+#define EMIF_SDREF 0x0000081a
+#define DDR2_DLL_LOCK_DIFF 0x0
+#define DDR2_RD_DQS 0x12
+#define DDR2_PHY_FIFO_WE 0x80
+
+#define DDR2_INVERT_CLKOUT 0x00
+#define DDR2_WR_DQS 0x00
+#define DDR2_PHY_WRLVL 0x00
+#define DDR2_PHY_GATELVL 0x00
+#define DDR2_PHY_WR_DATA 0x40
+#define PHY_RANK0_DELAY 0x01
+#define PHY_DLL_LOCK_DIFF 0x0
+#define DDR_IOCTRL_VALUE 0x18B
+
+static void beaglebone_data_macro_config(int dataMacroNum)
+{
+ u32 BaseAddrOffset = 0x00;;
+
+ if (dataMacroNum == 1)
+ BaseAddrOffset = 0xA4;
+
+ __raw_writel(((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
+ |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)),
+ (DATA0_RD_DQS_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_RD_DQS>>2,
+ (DATA0_RD_DQS_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
+ |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)),
+ (DATA0_WR_DQS_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_WR_DQS>>2,
+ (DATA0_WR_DQS_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
+ |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)),
+ (DATA0_WRLVL_INIT_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_WRLVL>>2,
+ (DATA0_WRLVL_INIT_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
+ |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)),
+ (DATA0_GATELVL_INIT_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_GATELVL>>2,
+ (DATA0_GATELVL_INIT_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
+ |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
+ (DATA0_FIFO_WE_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_FIFO_WE>>2,
+ (DATA0_FIFO_WE_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
+ |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
+ (DATA0_WR_DATA_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_WR_DATA>>2,
+ (DATA0_WR_DATA_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(PHY_DLL_LOCK_DIFF,
+ (DATA0_DLL_LOCK_DIFF_0 + BaseAddrOffset));
+}
+
+static void beaglebone_cmd_macro_config(void)
+{
+ __raw_writel(DDR2_RATIO, CMD0_CTRL_SLAVE_RATIO_0);
+ __raw_writel(CMD_FORCE, CMD0_CTRL_SLAVE_FORCE_0);
+ __raw_writel(CMD_DELAY, CMD0_CTRL_SLAVE_DELAY_0);
+ __raw_writel(DDR2_DLL_LOCK_DIFF, CMD0_DLL_LOCK_DIFF_0);
+ __raw_writel(DDR2_INVERT_CLKOUT, CMD0_INVERT_CLKOUT_0);
+
+ __raw_writel(DDR2_RATIO, CMD1_CTRL_SLAVE_RATIO_0);
+ __raw_writel(CMD_FORCE, CMD1_CTRL_SLAVE_FORCE_0);
+ __raw_writel(CMD_DELAY, CMD1_CTRL_SLAVE_DELAY_0);
+ __raw_writel(DDR2_DLL_LOCK_DIFF, CMD1_DLL_LOCK_DIFF_0);
+ __raw_writel(DDR2_INVERT_CLKOUT, CMD1_INVERT_CLKOUT_0);
+
+ __raw_writel(DDR2_RATIO, CMD2_CTRL_SLAVE_RATIO_0);
+ __raw_writel(CMD_FORCE, CMD2_CTRL_SLAVE_FORCE_0);
+ __raw_writel(CMD_DELAY, CMD2_CTRL_SLAVE_DELAY_0);
+ __raw_writel(DDR2_DLL_LOCK_DIFF, CMD2_DLL_LOCK_DIFF_0);
+ __raw_writel(DDR2_INVERT_CLKOUT, CMD2_INVERT_CLKOUT_0);
+}
+
+static void beaglebone_config_vtp(void)
+{
+ __raw_writel(__raw_readl(VTP0_CTRL_REG) | VTP_CTRL_ENABLE,
+ VTP0_CTRL_REG);
+ __raw_writel(__raw_readl(VTP0_CTRL_REG) & (~VTP_CTRL_START_EN),
+ VTP0_CTRL_REG);
+ __raw_writel(__raw_readl(VTP0_CTRL_REG) | VTP_CTRL_START_EN,
+ VTP0_CTRL_REG);
+
+ /* Poll for READY */
+ while ((__raw_readl(VTP0_CTRL_REG) & VTP_CTRL_READY) != VTP_CTRL_READY);
+}
+
+static void beaglebone_config_emif_ddr2(void)
+{
+ u32 i;
+
+ /*Program EMIF0 CFG Registers*/
+ __raw_writel(EMIF_READ_LATENCY, EMIF4_0_DDR_PHY_CTRL_1);
+ __raw_writel(EMIF_READ_LATENCY, EMIF4_0_DDR_PHY_CTRL_1_SHADOW);
+ __raw_writel(EMIF_READ_LATENCY, EMIF4_0_DDR_PHY_CTRL_2);
+ __raw_writel(EMIF_TIM1, EMIF4_0_SDRAM_TIM_1);
+ __raw_writel(EMIF_TIM1, EMIF4_0_SDRAM_TIM_1_SHADOW);
+ __raw_writel(EMIF_TIM2, EMIF4_0_SDRAM_TIM_2);
+ __raw_writel(EMIF_TIM2, EMIF4_0_SDRAM_TIM_2_SHADOW);
+ __raw_writel(EMIF_TIM3, EMIF4_0_SDRAM_TIM_3);
+ __raw_writel(EMIF_TIM3, EMIF4_0_SDRAM_TIM_3_SHADOW);
+
+ __raw_writel(EMIF_SDCFG, EMIF4_0_SDRAM_CONFIG);
+ __raw_writel(EMIF_SDCFG, EMIF4_0_SDRAM_CONFIG2);
+
+ /* __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL);
+ __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL_SHD); */
+ __raw_writel(0x00004650, EMIF4_0_SDRAM_REF_CTRL);
+ __raw_writel(0x00004650, EMIF4_0_SDRAM_REF_CTRL_SHADOW);
+
+ for (i = 0; i < 5000; i++) {
+
+ }
+
+ /* __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL);
+ __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL_SHD); */
+ __raw_writel(EMIF_SDREF, EMIF4_0_SDRAM_REF_CTRL);
+ __raw_writel(EMIF_SDREF, EMIF4_0_SDRAM_REF_CTRL_SHADOW);
+
+ __raw_writel(EMIF_SDCFG, EMIF4_0_SDRAM_CONFIG);
+ __raw_writel(EMIF_SDCFG, EMIF4_0_SDRAM_CONFIG2);
+}
+
+static void beaglebone_config_ddr(void)
+{
+ enable_ddr_clocks();
+
+ beaglebone_config_vtp();
+
+ beaglebone_cmd_macro_config();
+ beaglebone_data_macro_config(0);
+ beaglebone_data_macro_config(1);
+
+ __raw_writel(PHY_RANK0_DELAY, DATA0_RANK0_DELAYS_0);
+ __raw_writel(PHY_RANK0_DELAY, DATA1_RANK0_DELAYS_0);
+
+ __raw_writel(DDR_IOCTRL_VALUE, DDR_CMD0_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, DDR_CMD1_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, DDR_CMD2_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, DDR_DATA0_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, DDR_DATA1_IOCTRL);
+
+ __raw_writel(__raw_readl(DDR_IO_CTRL) & 0xefffffff, DDR_IO_CTRL);
+ __raw_writel(__raw_readl(DDR_CKE_CTRL) | 0x00000001, DDR_CKE_CTRL);
+
+ beaglebone_config_emif_ddr2();
+}
+
+/*
+ * early system init of muxing and clocks.
+ */
+void beaglebone_sram_init(void)
+{
+ u32 regVal, uart_base;
+
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ /* UART softreset */
+ uart_base = AM33XX_UART0_BASE;
+
+ regVal = __raw_readl(uart_base + UART_SYSCFG_OFFSET);
+ regVal |= UART_RESET;
+ __raw_writel(regVal, (uart_base + UART_SYSCFG_OFFSET) );
+ while ((__raw_readl(uart_base + UART_SYSSTS_OFFSET) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK);
+
+ /* Disable smart idle */
+ regVal = __raw_readl((uart_base + UART_SYSCFG_OFFSET));
+ regVal |= UART_SMART_IDLE_EN;
+ __raw_writel(regVal, (uart_base + UART_SYSCFG_OFFSET));
+
+ beaglebone_config_ddr();
+}
+
+
+/**
+ * @brief The basic entry point for board initialization.
+ *
+ * This is called as part of machine init (after arch init).
+ * This is again called with stack in SRAM, so not too many
+ * constructs possible here.
+ *
+ * @return void
+ */
+static int beaglebone_board_init(void)
+{
+ int in_sdram = running_in_sdram();
+
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ __raw_writel(0xAAAA, WDT_WSPR);
+ while(__raw_readl(WDT_WWPS) != 0x0);
+ __raw_writel(0x5555, WDT_WSPR);
+ while(__raw_readl(WDT_WWPS) != 0x0);
+
+ /* Dont reconfigure SDRAM while running in SDRAM! */
+ if (!in_sdram)
+ beaglebone_sram_init();
+
+ enable_mii1_pin_mux();
+ enable_i2c0_pin_mux();
+
+ return 0;
+}
+pure_initcall(beaglebone_board_init);
+
+/******************** Board Run Time *******************/
+
+#ifdef CONFIG_DRIVER_SERIAL_NS16550
+
+static struct NS16550_plat serial_plat = {
+ .clock = 48000000, /* 48MHz (APLL96/2) */
+ .shift = 2,
+};
+
+/**
+ * @brief UART serial port initialization - remember to enable COM clocks in
+ * arch
+ *
+ * @return result of device registration
+ */
+static int beaglebone_console_init(void)
+{
+ /* Enable pin mux */
+ enable_uart0_pin_mux();
+
+ /* Register the serial port */
+ add_ns16550_device(-1, AM33XX_UART0_BASE, SZ_1K, IORESOURCE_MEM_8BIT,
+ &serial_plat);
+
+ return 0;
+}
+console_initcall(beaglebone_console_init);
+#endif /* CONFIG_DRIVER_SERIAL_NS16550 */
+
+static int beaglebone_mem_init(void)
+{
+ arm_add_mem_device("ram0", 0x80000000, 256 * 1024 * 1024);
+
+ return 0;
+}
+mem_initcall(beaglebone_mem_init);
+
+static int beaglebone_devices_init(void)
+{
+ add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL,
+ AM33XX_MMCHS0_BASE+0x100, SZ_4K,
+ IORESOURCE_MEM, NULL);
+
+ armlinux_set_bootparams((void *)0x80000100);
+ armlinux_set_architecture(MACH_TYPE_BEAGLEBONE);
+
+ return 0;
+}
+device_initcall(beaglebone_devices_init);
+
+#ifdef CONFIG_DEFAULT_ENVIRONMENT
+static int beaglebone_env_init(void)
+{
+ struct stat s;
+ char *diskdev = "/dev/disk0.0";
+ int ret;
+
+ ret = stat(diskdev, &s);
+ if (ret) {
+ printf("device %s not found. Using default environment\n", diskdev);
+ return 0;
+ }
+
+ mkdir ("/boot", 0666);
+ ret = mount(diskdev, "fat", "/boot");
+ if (ret) {
+ printf("failed to mount %s\n", diskdev);
+ return 0;
+ }
+
+ if (IS_ENABLED(CONFIG_OMAP_BUILD_IFT))
+ default_environment_path = "/dev/defaultenv";
+ else
+ default_environment_path = "/boot/barebox.env";
+
+ return 0;
+}
+late_initcall(beaglebone_env_init);
+#endif
diff --git a/arch/arm/boards/beaglebone/config.h b/arch/arm/boards/beaglebone/config.h
new file mode 100644
index 0000000..252aa79
--- /dev/null
+++ b/arch/arm/boards/beaglebone/config.h
@@ -0,0 +1,17 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _CONFIG_H_
+# define _CONFIG_H_
+
+#endif /* _CONFIG_H_ */
diff --git a/arch/arm/boards/beaglebone/env/boot/sd b/arch/arm/boards/beaglebone/env/boot/sd
new file mode 100644
index 0000000..dce0605
--- /dev/null
+++ b/arch/arm/boards/beaglebone/env/boot/sd
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "kernel & rootfs on SD card"
+ exit
+fi
+
+global.bootm.image=/boot/uImage
+global.bootm.oftree=/boot/oftree
+#global.bootm.initrd=<path to initrd>
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
diff --git a/arch/arm/boards/beaglebone/env/config b/arch/arm/boards/beaglebone/env/config
new file mode 100644
index 0000000..c6ce930
--- /dev/null
+++ b/arch/arm/boards/beaglebone/env/config
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+# change network settings in /env/network/eth0
+# change mtd partition settings and automountpoints in /env/init/*
+
+#global.hostname=
+
+# set to false if you do not want to have colors
+global.allow_color=true
+
+# user (used for network filenames)
+global.user=none
+
+# timeout in seconds before the default boot entry is started
+global.autoboot_timeout=3
+
+# default boot entry (one of /env/boot/*)
+global.boot.default=sd
+
+# base bootargs
+global.linux.bootargs.base="console=ttyO0,115200n8"
diff --git a/arch/arm/boards/beaglebone/mlo-env/bin/boot b/arch/arm/boards/beaglebone/mlo-env/bin/boot
new file mode 100644
index 0000000..c831c35
--- /dev/null
+++ b/arch/arm/boards/beaglebone/mlo-env/bin/boot
@@ -0,0 +1,143 @@
+#!/bin/sh
+
+. /env/config
+
+if [ x$kernel_loc = xnet ]; then
+ kernel_loc=tftp
+fi
+
+while getopt "hk:r:i:m:o:" Option
+do
+if [ ${Option} = k ]; then
+ kernel_loc=${OPTARG}
+elif [ ${Option} = r ]; then
+ rootfs_loc=${OPTARG}
+elif [ ${Option} = o ]; then
+ oftree_loc=${OPTARG}
+elif [ ${Option} = i ]; then
+ ip=${OPTARG}
+elif [ ${Option} = m ]; then
+ mode=${OPTARG}
+else
+ . /env/bin/_boot_help
+ exit 0
+fi
+done
+
+if [ x$mode = xnand ]; then
+ rootfs_loc=nand
+ kernel_loc=nand
+elif [ x$mode = xnor ]; then
+ rootfs_loc=nor
+ kernel_loc=nor
+elif [ x$mode = xnfs ]; then
+ rootfs_loc=net
+ kernel_loc=nfs
+elif [ x$mode = xtftp ]; then
+ rootfs_loc=net
+ kernel_loc=tftp
+elif [ x$mode = xdisk ]; then
+ rootfs_loc=disk
+ kernel_loc=disk
+fi
+
+if [ x$ip = xdhcp -o x$ip = "xdhcp-barebox" ]; then
+ if [ x$kernel_loc = xnfs -o x$kernel_loc = xtftp ]; then
+ dhcp
+ if [ x${global.dhcp.rootpath} != x ]; then
+ nfsroot=${global.dhcp.rootpath}
+ fi
+ if [ x${global.dhcp.bootfile} != x ]; then
+ kernelimage=${global.dhcp.bootfile}
+ fi
+ if [ x$global.dhcp.oftree_file} != x ]; then
+ oftreeimage=${global.dhcp_oftree_file}
+ fi
+ fi
+fi
+
+if [ x$ip = xdhcp -o ]; then
+ bootargs="$bootargs ip=dhcp"
+elif [ x$ip = xnone ]; then
+ bootargs="$bootargs ip=none"
+else
+ bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask::eth0:"
+fi
+
+
+if [ x$rootfs_loc = xnet ]; then
+ bootargs="$bootargs root=/dev/nfs nfsroot=$nfsroot,v3,tcp noinitrd"
+elif [ x$rootfs_loc = xdisk ]; then
+ bootargs="$bootargs root=/dev/$rootfs_part_linux_dev rootfstype=$rootfs_type noinitrd rootwait"
+elif [ x$rootfs_loc = xinitrd ]; then
+ bootargs="$bootargs root=/dev/ram0 rdinit=/sbin/init"
+else
+ if [ x$rootfs_loc = xnand ]; then
+ rootfs_mtdblock=$rootfs_mtdblock_nand
+ else
+ rootfs_mtdblock=$rootfs_mtdblock_nor
+ fi
+
+ if [ x$rootfs_type = xubifs ]; then
+ if [ -z $ubiroot ]; then
+ ubiroot="root"
+ fi
+ bootargs="$bootargs root=ubi0:$ubiroot ubi.mtd=$rootfs_mtdblock"
+ else
+ bootargs="$bootargs root=/dev/mtdblock$rootfs_mtdblock"
+ fi
+
+ bootargs="$bootargs rootfstype=$rootfs_type noinitrd"
+fi
+
+if [ -n $nor_parts ]; then
+ mtdparts="${mtdparts}physmap-flash.0:${nor_parts}"
+fi
+
+if [ -n $nand_parts ]; then
+ if [ -n ${mtdparts} ]; then
+ mtdparts="${mtdparts};"
+ fi
+ mtdparts="${mtdparts}${nand_device}:${nand_parts}"
+fi
+
+if [ -n $mtdparts ]; then
+ bootargs="${bootargs} mtdparts=${mtdparts}"
+fi
+
+if [ -f $kernel_loc ]; then
+ kdev="$kernel_loc"
+elif [ x$kernel_loc = xnfs -o x$kernel_loc = xtftp ]; then
+ kdev=/image
+ $kernel_loc $kernelimage $kdev || exit 1
+elif [ x$kernel_loc = xnor ]; then
+ kdev="/dev/nor0.kernel"
+elif [ x$kernel_loc = xnand ]; then
+ kdev="/dev/nand0.kernel.bb"
+elif [ x$kernel_loc = xdisk ]; then
+ kdev="/dev/$kernel_part"
+else
+ echo "error: set kernel_loc to one of 'tftp', 'nfs', 'nand', 'nor' or 'disk'"
+ exit 1
+fi
+
+if [ x$oftree_loc = xnfs -o x$oftree_loc = xtftp ]; then
+ odev=/oftree
+ $oftree_loc $oftreeimage $odev || exit 1
+elif [ x$oftree_loc = xnor ]; then
+ odev="/dev/nor0.oftree"
+elif [ x$oftree_loc = xnand ]; then
+ odev="/dev/nand0.oftree.bb"
+elif [ x$oftree_loc = xdisk ]; then
+ odev="/dev/$oftree_part"
+fi
+
+[ x$odev = x ] || bootm_opt="$bootm_opt -o $odev"
+
+echo "booting kernel from $kdev"
+
+#try to execute the file
+# it does not work as example for /dev as the file is not executable
+$kdev $bootm_opt
+# fall back on bootm
+bootm $bootm_opt $kdev
diff --git a/arch/arm/boards/beaglebone/mlo-env/config b/arch/arm/boards/beaglebone/mlo-env/config
new file mode 100644
index 0000000..473777a
--- /dev/null
+++ b/arch/arm/boards/beaglebone/mlo-env/config
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+hostname=BeagleBone
+if [ -z "$user" ]; then
+# user=
+fi
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=none
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.serverip=a.b.c.d
+#eth0.gateway=a.b.c.d
+
+# can be either 'tftp', 'nfs', 'nand', 'nor' or 'disk'
+kernel_loc=/boot/uImage
+# can be either 'net', 'nand', 'nor', 'disk' or 'initrd'
+rootfs_loc=disk
+# can be either 'tftp', 'nfs', 'nand', 'nor', 'disk' or none
+oftree_loc=none
+
+# for flash based rootfs: 'jffs2' or 'ubifs'
+# in case of disk any regular filesystem like 'ext2', 'ext3', 'reiserfs'
+rootfs_type=ext4
+# where is the rootfs in case of 'rootfs_loc=disk' (linux name)
+rootfs_part_linux_dev=mmcblk0p2
+
+kernelimage=uImage-${global.hostname}
+
+bareboximage=barebox-${global.hostname}.bin
+bareboxenvimage=barebox-${global.hostname}.env
+
+if [ -n $user ]; then
+ bareboximage="$user"-"$bareboximage"
+ bareboxenvimage="$user"-"$bareboxenvimage"
+ kernelimage="$user"-"$kernelimage"
+ rootfsimage="$user"-"$rootfsimage"
+ nfsroot="/home/$user/nfsroot/${global.hostname}"
+else
+ nfsroot="/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+bootargs="console=ttyO0,115200n8"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/configs/am335x_beaglebone_defconfig b/arch/arm/configs/am335x_beaglebone_defconfig
new file mode 100644
index 0000000..2066d9c
--- /dev/null
+++ b/arch/arm/configs/am335x_beaglebone_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_AM33XX=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x81000000
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="barebox> "
+CONFIG_LONGHELP=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+# CONFIG_TIMESTAMP is not set
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/beaglebone/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_OMAP_HSMMC=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/configs/am335x_beaglebone_mlo_large_defconfig b/arch/arm/configs/am335x_beaglebone_mlo_large_defconfig
new file mode 100644
index 0000000..75def0d
--- /dev/null
+++ b/arch/arm/configs/am335x_beaglebone_mlo_large_defconfig
@@ -0,0 +1,47 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_AM33XX=y
+CONFIG_OMAP_BUILD_IFT=y
+CONFIG_THUMB2_BAREBOX=y
+CONFIG_LOCALVERSION="-mlo-large"
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x402F0400
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x4030B800
+CONFIG_STACK_SIZE=0x1600
+CONFIG_MALLOC_BASE=0x8F000000
+CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_PROMPT="barebox mlo> "
+CONFIG_LONGHELP=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/beaglebone/mlo-env"
+CONFIG_CMD_EXPORT=y
+# CONFIG_CMD_RM is not set
+# CONFIG_CMD_CAT is not set
+# CONFIG_CMD_RMDIR is not set
+# CONFIG_CMD_CP is not set
+# CONFIG_CMD_PWD is not set
+# CONFIG_CMD_CD is not set
+# CONFIG_CMD_UMOUNT is not set
+# CONFIG_CMD_CLEAR is not set
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+# CONFIG_CMD_VERSION is not set
+# CONFIG_CMD_HELP is not set
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_OMAP_HSMMC=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
new file mode 100644
index 0000000..65260bf
--- /dev/null
+++ b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
@@ -0,0 +1,29 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_AM33XX=y
+CONFIG_OMAP_BUILD_IFT=y
+CONFIG_THUMB2_BAREBOX=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x402F0400
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x4030B800
+CONFIG_STACK_SIZE=0x1600
+CONFIG_MALLOC_BASE=0x8F000000
+CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_PROMPT="MLO>"
+CONFIG_LONGHELP=y
+CONFIG_SHELL_NONE=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_OMAP_HSMMC=y
+# CONFIG_FS_RAMFS is not set
+# CONFIG_FS_DEVFS is not set
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 5ccf7ae..f8b8f2b 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -105,7 +105,8 @@ config OMAP4_USBBOOT
config BOARDINFO
default "Archos G9" if MACH_ARCHOSG9
default "Texas Instrument's SDP343x" if MACH_OMAP343xSDP
- default "Texas Instrument's Beagle" if MACH_BEAGLE
+ default "Texas Instrument's Beagle Board" if MACH_BEAGLE
+ default "Texas Instrument's Beagle Bone" if MACH_BEAGLEBONE
default "Texas Instrument's OMAP3EVM" if MACH_OMAP3EVM
default "Texas Instrument's Panda" if MACH_PANDA
default "Phytec phyCORE pcm049" if MACH_PCM049
@@ -129,6 +130,14 @@ config MACH_BEAGLE
help
Say Y here if you are using Beagle Board
+config MACH_BEAGLEBONE
+ bool "Texas Instrument's Beagle Bone"
+ select OMAP_CLOCK_ALL
+ select HAVE_NOSHELL
+ depends on ARCH_AM33XX
+ help
+ Say Y here if you are using Beagle Bone
+
config MACH_OMAP3EVM
bool "Texas Instrument's OMAP3 EVM"
select HAVE_NOSHELL
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
index 290034e..1536744 100644
--- a/arch/arm/mach-omap/Makefile
+++ b/arch/arm/mach-omap/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o auxcr.o
pbl-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o auxcr.o
obj-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
pbl-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
-obj-$(CONFIG_ARCH_AM33XX) += am33xx_generic.o
+obj-$(CONFIG_ARCH_AM33XX) += am33xx_generic.o am33xx_clock.o am33xx_mux.o
obj-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
pbl-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
obj-$(CONFIG_OMAP_GPMC) += gpmc.o devices-gpmc-nand.o
diff --git a/arch/arm/mach-omap/am33xx_clock.c b/arch/arm/mach-omap/am33xx_clock.c
new file mode 100644
index 0000000..843af9c
--- /dev/null
+++ b/arch/arm/mach-omap/am33xx_clock.c
@@ -0,0 +1,289 @@
+/*
+ * pll.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <mach/clocks.h>
+
+#define PRCM_MOD_EN 0x2
+#define PRCM_FORCE_WAKEUP 0x2
+
+#define PRCM_EMIF_CLK_ACTIVITY (0x1 << 2)
+#define PRCM_L3_GCLK_ACTIVITY (0x1 << 4)
+
+#define PLL_BYPASS_MODE 0x4
+#define PLL_LOCK_MODE 0x7
+#define PLL_MULTIPLIER_SHIFT 8
+
+static void interface_clocks_enable(void)
+{
+ /* Enable all the Interconnect Modules */
+ __raw_writel(PRCM_MOD_EN, CM_PER_L3_CLKCTRL);
+ while (__raw_readl(CM_PER_L3_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L4LS_CLKCTRL);
+ while (__raw_readl(CM_PER_L4LS_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L4FW_CLKCTRL);
+ while (__raw_readl(CM_PER_L4FW_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_L4WKUP_CLKCTRL);
+ while (__raw_readl(CM_WKUP_L4WKUP_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L3_INSTR_CLKCTRL);
+ while (__raw_readl(CM_PER_L3_INSTR_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L4HS_CLKCTRL);
+ while (__raw_readl(CM_PER_L4HS_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_SPI1_CLKCTRL);
+ while (__raw_readl(CM_PER_SPI1_CLKCTRL) != PRCM_MOD_EN);
+
+ /* GPIO0 */
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_GPIO0_CLKCTRL);
+ while (__raw_readl(CM_WKUP_GPIO0_CLKCTRL) != PRCM_MOD_EN);
+}
+
+static void power_domain_transition_enable(void)
+{
+ /*
+ * Force power domain wake up transition
+ * Ensure that the corresponding interface clock is active before
+ * using the peripheral
+ */
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L3_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L4LS_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_WKUP_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L4FW_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L3S_CLKSTCTRL);
+}
+
+/*
+ * Enable the module clock and the power domain for required peripherals
+ */
+static void per_clocks_enable(void)
+{
+ /* Enable the module clock */
+ __raw_writel(PRCM_MOD_EN, CM_PER_TIMER2_CLKCTRL);
+ while (__raw_readl(CM_PER_TIMER2_CLKCTRL) != PRCM_MOD_EN);
+
+ /* Select the Master osc 24 MHZ as Timer2 clock source */
+ __raw_writel(0x1, CLKSEL_TIMER2_CLK);
+
+ /* UART0 */
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_UART0_CLKCTRL);
+ while (__raw_readl(CM_WKUP_UART0_CLKCTRL) != PRCM_MOD_EN);
+
+ /* UART3 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_UART3_CLKCTRL);
+ while (__raw_readl(CM_PER_UART3_CLKCTRL) != PRCM_MOD_EN);
+
+ /* GPMC */
+ __raw_writel(PRCM_MOD_EN, CM_PER_GPMC_CLKCTRL);
+ while (__raw_readl(CM_PER_GPMC_CLKCTRL) != PRCM_MOD_EN);
+
+ /* ELM */
+ __raw_writel(PRCM_MOD_EN, CM_PER_ELM_CLKCTRL);
+ while (__raw_readl(CM_PER_ELM_CLKCTRL) != PRCM_MOD_EN);
+
+ /* i2c0 */
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_I2C0_CLKCTRL);
+ while (__raw_readl(CM_WKUP_I2C0_CLKCTRL) != PRCM_MOD_EN);
+
+ /* i2c1 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_I2C1_CLKCTRL);
+ while (__raw_readl(CM_PER_I2C1_CLKCTRL) != PRCM_MOD_EN);
+
+ /* i2c2 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_I2C2_CLKCTRL);
+ while (__raw_readl(CM_PER_I2C2_CLKCTRL) != PRCM_MOD_EN);
+
+ /* Ethernet */
+ __raw_writel(PRCM_MOD_EN, CM_PER_CPGMAC0_CLKCTRL);
+ __raw_writel(PRCM_MOD_EN, CM_PER_CPSW_CLKSTCTRL);
+ while ((__raw_readl(CM_PER_CPGMAC0_CLKCTRL) & 0x30000) != 0x0);
+
+ /* MMC 0 & 1 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_MMC0_CLKCTRL);
+ while (__raw_readl(CM_PER_MMC0_CLKCTRL) != PRCM_MOD_EN);
+ __raw_writel(PRCM_MOD_EN, CM_PER_MMC1_CLKCTRL);
+ while (__raw_readl(CM_PER_MMC1_CLKCTRL) != PRCM_MOD_EN);
+
+ /* Enable the control module though RBL would have done it*/
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_CONTROL_CLKCTRL);
+ while (__raw_readl(CM_WKUP_CONTROL_CLKCTRL) != PRCM_MOD_EN);
+
+ /* SPI 0 & 1 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_SPI0_CLKCTRL);
+ while (__raw_readl(CM_PER_SPI0_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_SPI1_CLKCTRL);
+ while (__raw_readl(CM_PER_SPI1_CLKCTRL) != PRCM_MOD_EN);
+}
+
+static void mpu_pll_config(int mpupll_M)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_MPU);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_MPU);
+ div_m2 = __raw_readl(CM_DIV_M2_DPLL_MPU);
+
+ /* Set the PLL to bypass Mode */
+ __raw_writel(PLL_BYPASS_MODE, CM_CLKMODE_DPLL_MPU);
+
+ while(__raw_readl(CM_IDLEST_DPLL_MPU) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((mpupll_M << 0x8) | MPUPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_MPU);
+
+ div_m2 = div_m2 & ~0x1f;
+ div_m2 = div_m2 | MPUPLL_M2;
+ __raw_writel(div_m2, CM_DIV_M2_DPLL_MPU);
+
+ clkmode = clkmode | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_MPU);
+
+ while(__raw_readl(CM_IDLEST_DPLL_MPU) != 0x1);
+}
+
+static void core_pll_config(void)
+{
+ u32 clkmode, clksel, div_m4, div_m5, div_m6;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_CORE);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_CORE);
+ div_m4 = __raw_readl(CM_DIV_M4_DPLL_CORE);
+ div_m5 = __raw_readl(CM_DIV_M5_DPLL_CORE);
+ div_m6 = __raw_readl(CM_DIV_M6_DPLL_CORE);
+
+ /* Set the PLL to bypass Mode */
+ __raw_writel(PLL_BYPASS_MODE, CM_CLKMODE_DPLL_CORE);
+
+ while(__raw_readl(CM_IDLEST_DPLL_CORE) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((COREPLL_M << 0x8) | COREPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_CORE);
+
+ div_m4 = div_m4 & ~0x1f;
+ div_m4 = div_m4 | COREPLL_M4;
+ __raw_writel(div_m4, CM_DIV_M4_DPLL_CORE);
+
+ div_m5 = div_m5 & ~0x1f;
+ div_m5 = div_m5 | COREPLL_M5;
+ __raw_writel(div_m5, CM_DIV_M5_DPLL_CORE);
+
+ div_m6 = div_m6 & ~0x1f;
+ div_m6 = div_m6 | COREPLL_M6;
+ __raw_writel(div_m6, CM_DIV_M6_DPLL_CORE);
+
+
+ clkmode = clkmode | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_CORE);
+
+ while(__raw_readl(CM_IDLEST_DPLL_CORE) != 0x1);
+}
+
+static void per_pll_config(void)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_PER);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_PER);
+ div_m2 = __raw_readl(CM_DIV_M2_DPLL_PER);
+
+ /* Set the PLL to bypass Mode */
+ __raw_writel(PLL_BYPASS_MODE, CM_CLKMODE_DPLL_PER);
+
+ while(__raw_readl(CM_IDLEST_DPLL_PER) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((PERPLL_M << 0x8) | PERPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_PER);
+
+ div_m2 = div_m2 & ~0x7f;
+ div_m2 = div_m2 | PERPLL_M2;
+ __raw_writel(div_m2, CM_DIV_M2_DPLL_PER);
+
+ clkmode = clkmode | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_PER);
+
+ while(__raw_readl(CM_IDLEST_DPLL_PER) != 0x1);
+}
+
+static void ddr_pll_config(void)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_DDR);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_DDR);
+ div_m2 = __raw_readl(CM_DIV_M2_DPLL_DDR);
+
+ /* Set the PLL to bypass Mode */
+ clkmode = (clkmode & 0xfffffff8) | 0x00000004;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_DDR);
+
+ while ((__raw_readl(CM_IDLEST_DPLL_DDR) & 0x00000100) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((DDRPLL_M << 0x8) | DDRPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_DDR);
+
+ div_m2 = div_m2 & 0xFFFFFFE0;
+ div_m2 = div_m2 | DDRPLL_M2;
+ __raw_writel(div_m2, CM_DIV_M2_DPLL_DDR);
+
+ clkmode = (clkmode & 0xfffffff8) | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_DDR);
+
+ while ((__raw_readl(CM_IDLEST_DPLL_DDR) & 0x00000001) != 0x1);
+}
+
+void enable_ddr_clocks(void)
+{
+ /* Enable the EMIF_FW Functional clock */
+ __raw_writel(PRCM_MOD_EN, CM_PER_EMIF_FW_CLKCTRL);
+ /* Enable EMIF0 Clock */
+ __raw_writel(PRCM_MOD_EN, CM_PER_EMIF_CLKCTRL);
+ /* Poll for emif_gclk & L3_G clock are active */
+ while ((__raw_readl(CM_PER_L3_CLKSTCTRL) & (PRCM_EMIF_CLK_ACTIVITY |
+ PRCM_L3_GCLK_ACTIVITY)) != (PRCM_EMIF_CLK_ACTIVITY |
+ PRCM_L3_GCLK_ACTIVITY));
+ /* Poll if module is functional */
+ while ((__raw_readl(CM_PER_EMIF_CLKCTRL)) != PRCM_MOD_EN);
+
+}
+
+/*
+ * Configure the PLL/PRCM for necessary peripherals
+ */
+void pll_init()
+{
+ mpu_pll_config(MPUPLL_M_500);
+ core_pll_config();
+ per_pll_config();
+ ddr_pll_config();
+ /* Enable the required interconnect clocks */
+ interface_clocks_enable();
+ /* Enable power domain transition */
+ power_domain_transition_enable();
+ /* Enable the required peripherals */
+ per_clocks_enable();
+}
diff --git a/arch/arm/mach-omap/am33xx_generic.c b/arch/arm/mach-omap/am33xx_generic.c
index ba08773..a8fdec9 100644
--- a/arch/arm/mach-omap/am33xx_generic.c
+++ b/arch/arm/mach-omap/am33xx_generic.c
@@ -1,5 +1,6 @@
/*
* (C) Copyright 2012 Teresa Gámez, Phytec Messtechnik GmbH
+ * (C) Copyright 2012 Jan Luebbe <j.luebbe@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -20,6 +21,8 @@
#include <io.h>
#include <mach/silicon.h>
#include <mach/clocks.h>
+#include <mach/sys_info.h>
+#include <mach/xload.h>
void __noreturn reset_cpu(unsigned long addr)
{
@@ -27,3 +30,74 @@ void __noreturn reset_cpu(unsigned long addr)
while (1);
}
+
+/**
+ * @brief Get the upper address of current execution
+ *
+ * we can use this to figure out if we are running in SRAM /
+ * XIP Flash or in SDRAM
+ *
+ * @return base address
+ */
+u32 get_base(void)
+{
+ u32 val;
+ __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+ val &= 0xF0000000;
+ val >>= 28;
+ return val;
+}
+
+/**
+ * @brief Are we running in Flash XIP?
+ *
+ * If the base is in GPMC address space, we probably are!
+ *
+ * @return 1 if we are running in XIP mode, else return 0
+ */
+u32 running_in_flash(void)
+{
+ if (get_base() < 4)
+ return 1; /* in flash */
+ return 0; /* running in SRAM or SDRAM */
+}
+
+/**
+ * @brief Are we running in OMAP internal SRAM?
+ *
+ * If in SRAM address, then yes!
+ *
+ * @return 1 if we are running in SRAM, else return 0
+ */
+u32 running_in_sram(void)
+{
+ if (get_base() == 4)
+ return 1; /* in SRAM */
+ return 0; /* running in FLASH or SDRAM */
+}
+
+/**
+ * @brief Are we running in SDRAM?
+ *
+ * if we are not in GPMC nor in SRAM address space,
+ * we are in SDRAM execution area
+ *
+ * @return 1 if we are running from SDRAM, else return 0
+ */
+u32 running_in_sdram(void)
+{
+ if (get_base() > 4)
+ return 1; /* in sdram */
+ return 0; /* running in SRAM or FLASH */
+}
+
+#define AM33XX_TRACING_VECTOR3 0x4030cd48
+
+enum omap_boot_src am33xx_bootsrc(void)
+{
+ u32 bootsrc = readl(AM33XX_TRACING_VECTOR3);
+
+ if (bootsrc & (1 << 5))
+ return OMAP_BOOTSRC_MMC1;
+ return OMAP_BOOTSRC_UNKNOWN;
+}
diff --git a/arch/arm/mach-omap/am33xx_mux.c b/arch/arm/mach-omap/am33xx_mux.c
new file mode 100644
index 0000000..d5e1586
--- /dev/null
+++ b/arch/arm/mach-omap/am33xx_mux.c
@@ -0,0 +1,502 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <mach/silicon.h>
+
+#define MUX_CFG(value, offset) \
+ __raw_writel(value, (OMAP_CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL (0x1 << 6)
+#define RXACTIVE (0x1 << 5)
+#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */
+#define PULLUDEN (0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
+#define MODE(val) val
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+/* TODO replace with defines */
+struct pad_signals {
+ int gpmc_ad0;
+ int gpmc_ad1;
+ int gpmc_ad2;
+ int gpmc_ad3;
+ int gpmc_ad4;
+ int gpmc_ad5;
+ int gpmc_ad6;
+ int gpmc_ad7;
+ int gpmc_ad8;
+ int gpmc_ad9;
+ int gpmc_ad10;
+ int gpmc_ad11;
+ int gpmc_ad12;
+ int gpmc_ad13;
+ int gpmc_ad14;
+ int gpmc_ad15;
+ int gpmc_a0;
+ int gpmc_a1;
+ int gpmc_a2;
+ int gpmc_a3;
+ int gpmc_a4;
+ int gpmc_a5;
+ int gpmc_a6;
+ int gpmc_a7;
+ int gpmc_a8;
+ int gpmc_a9;
+ int gpmc_a10;
+ int gpmc_a11;
+ int gpmc_wait0;
+ int gpmc_wpn;
+ int gpmc_be1n;
+ int gpmc_csn0;
+ int gpmc_csn1;
+ int gpmc_csn2;
+ int gpmc_csn3;
+ int gpmc_clk;
+ int gpmc_advn_ale;
+ int gpmc_oen_ren;
+ int gpmc_wen;
+ int gpmc_be0n_cle;
+ int lcd_data0;
+ int lcd_data1;
+ int lcd_data2;
+ int lcd_data3;
+ int lcd_data4;
+ int lcd_data5;
+ int lcd_data6;
+ int lcd_data7;
+ int lcd_data8;
+ int lcd_data9;
+ int lcd_data10;
+ int lcd_data11;
+ int lcd_data12;
+ int lcd_data13;
+ int lcd_data14;
+ int lcd_data15;
+ int lcd_vsync;
+ int lcd_hsync;
+ int lcd_pclk;
+ int lcd_ac_bias_en;
+ int mmc0_dat3;
+ int mmc0_dat2;
+ int mmc0_dat1;
+ int mmc0_dat0;
+ int mmc0_clk;
+ int mmc0_cmd;
+ int mii1_col;
+ int mii1_crs;
+ int mii1_rxerr;
+ int mii1_txen;
+ int mii1_rxdv;
+ int mii1_txd3;
+ int mii1_txd2;
+ int mii1_txd1;
+ int mii1_txd0;
+ int mii1_txclk;
+ int mii1_rxclk;
+ int mii1_rxd3;
+ int mii1_rxd2;
+ int mii1_rxd1;
+ int mii1_rxd0;
+ int rmii1_refclk;
+ int mdio_data;
+ int mdio_clk;
+ int spi0_sclk;
+ int spi0_d0;
+ int spi0_d1;
+ int spi0_cs0;
+ int spi0_cs1;
+ int ecap0_in_pwm0_out;
+ int uart0_ctsn;
+ int uart0_rtsn;
+ int uart0_rxd;
+ int uart0_txd;
+ int uart1_ctsn;
+ int uart1_rtsn;
+ int uart1_rxd;
+ int uart1_txd;
+ int i2c0_sda;
+ int i2c0_scl;
+ int mcasp0_aclkx;
+ int mcasp0_fsx;
+ int mcasp0_axr0;
+ int mcasp0_ahclkr;
+ int mcasp0_aclkr;
+ int mcasp0_fsr;
+ int mcasp0_axr1;
+ int mcasp0_ahclkx;
+ int xdma_event_intr0;
+ int xdma_event_intr1;
+ int nresetin_out;
+ int porz;
+ int nnmi;
+ int osc0_in;
+ int osc0_out;
+ int rsvd1;
+ int tms;
+ int tdi;
+ int tdo;
+ int tck;
+ int ntrst;
+ int emu0;
+ int emu1;
+ int osc1_in;
+ int osc1_out;
+ int pmic_power_en;
+ int rtc_porz;
+ int rsvd2;
+ int ext_wakeup;
+ int enz_kaldo_1p8v;
+ int usb0_dm;
+ int usb0_dp;
+ int usb0_ce;
+ int usb0_id;
+ int usb0_vbus;
+ int usb0_drvvbus;
+ int usb1_dm;
+ int usb1_dp;
+ int usb1_ce;
+ int usb1_id;
+ int usb1_vbus;
+ int usb1_drvvbus;
+ int ddr_resetn;
+ int ddr_csn0;
+ int ddr_cke;
+ int ddr_ck;
+ int ddr_nck;
+ int ddr_casn;
+ int ddr_rasn;
+ int ddr_wen;
+ int ddr_ba0;
+ int ddr_ba1;
+ int ddr_ba2;
+ int ddr_a0;
+ int ddr_a1;
+ int ddr_a2;
+ int ddr_a3;
+ int ddr_a4;
+ int ddr_a5;
+ int ddr_a6;
+ int ddr_a7;
+ int ddr_a8;
+ int ddr_a9;
+ int ddr_a10;
+ int ddr_a11;
+ int ddr_a12;
+ int ddr_a13;
+ int ddr_a14;
+ int ddr_a15;
+ int ddr_odt;
+ int ddr_d0;
+ int ddr_d1;
+ int ddr_d2;
+ int ddr_d3;
+ int ddr_d4;
+ int ddr_d5;
+ int ddr_d6;
+ int ddr_d7;
+ int ddr_d8;
+ int ddr_d9;
+ int ddr_d10;
+ int ddr_d11;
+ int ddr_d12;
+ int ddr_d13;
+ int ddr_d14;
+ int ddr_d15;
+ int ddr_dqm0;
+ int ddr_dqm1;
+ int ddr_dqs0;
+ int ddr_dqsn0;
+ int ddr_dqs1;
+ int ddr_dqsn1;
+ int ddr_vref;
+ int ddr_vtp;
+ int ddr_strben0;
+ int ddr_strben1;
+ int ain7;
+ int ain6;
+ int ain5;
+ int ain4;
+ int ain3;
+ int ain2;
+ int ain1;
+ int ain0;
+ int vrefp;
+ int vrefn;
+};
+
+struct module_pin_mux {
+ short reg_offset;
+ unsigned char val;
+};
+
+#define PAD_CTRL_BASE 0x800
+#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
+ (PAD_CTRL_BASE))->x)
+
+static const __maybe_unused struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux uart3_pin_mux[] = {
+ {OFFSET(spi0_cs1), (MODE(1) | PULLUDEN | RXACTIVE)}, /* UART3_RXD */
+ {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
+ {-1},
+};
+
+
+#ifdef CONFIG_NAND
+static const __maybe_unused struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {-1},
+};
+#endif
+
+static const __maybe_unused struct module_pin_mux i2c0_pin_mux[] = {
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux i2c1_pin_mux[] = {
+ {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux i2c2_pin_mux[] = {
+ {OFFSET(uart1_ctsn), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(uart1_rtsn), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux rgmii1_pin_mux[] = {
+ {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
+ {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
+ {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
+ {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
+ {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
+ {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
+ {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
+ {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
+ {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
+ {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
+ {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
+ {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux rgmii2_pin_mux[] = {
+ {OFFSET(gpmc_a0), MODE(2)}, /* RGMII2_TCTL */
+ {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII2_RCTL */
+ {OFFSET(gpmc_a2), MODE(2)}, /* RGMII2_TD3 */
+ {OFFSET(gpmc_a3), MODE(2)}, /* RGMII2_TD2 */
+ {OFFSET(gpmc_a4), MODE(2)}, /* RGMII2_TD1 */
+ {OFFSET(gpmc_a5), MODE(2)}, /* RGMII2_TD0 */
+ {OFFSET(gpmc_a6), MODE(2)}, /* RGMII2_TCLK */
+ {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII2_RCLK */
+ {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII2_RD3 */
+ {OFFSET(gpmc_a9), MODE(2) | RXACTIVE}, /* RGMII2_RD2 */
+ {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII2_RD1 */
+ {OFFSET(gpmc_a11), MODE(2) | RXACTIVE}, /* RGMII2_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux mii1_pin_mux[] = {
+ {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */
+ {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */
+ {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */
+ {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */
+ {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */
+ {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */
+ {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */
+ {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */
+ {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */
+ {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */
+ {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */
+ {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */
+ {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux rmii1_pin_mux[] = {
+ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */
+ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */
+ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */
+ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */
+ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */
+ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */
+ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */
+ {-1},
+};
+
+#ifdef CONFIG_NOR
+static const __maybe_unused struct module_pin_mux nor_pin_mux[] = {
+ {OFFSET(lcd_data0), MODE(1) | PULLUDEN}, /* NOR_A0 */
+ {OFFSET(lcd_data1), MODE(1) | PULLUDEN}, /* NOR_A1 */
+ {OFFSET(lcd_data2), MODE(1) | PULLUDEN}, /* NOR_A2 */
+ {OFFSET(lcd_data3), MODE(1) | PULLUDEN}, /* NOR_A3 */
+ {OFFSET(lcd_data4), MODE(1) | PULLUDEN}, /* NOR_A4 */
+ {OFFSET(lcd_data5), MODE(1) | PULLUDEN}, /* NOR_A5 */
+ {OFFSET(lcd_data6), MODE(1) | PULLUDEN}, /* NOR_A6 */
+ {OFFSET(lcd_data7), MODE(1) | PULLUDEN}, /* NOR_A7 */
+ {OFFSET(gpmc_a8), MODE(0)}, /* NOR_A8 */
+ {OFFSET(gpmc_a9), MODE(0)}, /* NOR_A9 */
+ {OFFSET(gpmc_a10), MODE(0)}, /* NOR_A10 */
+ {OFFSET(gpmc_a11), MODE(0)}, /* NOR_A11 */
+ {OFFSET(lcd_data8), MODE(1) | PULLUDEN}, /* NOR_A12 */
+ {OFFSET(lcd_data9), MODE(1) | PULLUDEN}, /* NOR_A13 */
+ {OFFSET(lcd_data10), MODE(1) | PULLUDEN}, /* NOR_A14 */
+ {OFFSET(lcd_data11), MODE(1) | PULLUDEN}, /* NOR_A15 */
+ {OFFSET(lcd_data12), MODE(1) | PULLUDEN}, /* NOR_A16 */
+ {OFFSET(lcd_data13), MODE(1) | PULLUDEN}, /* NOR_A17 */
+ {OFFSET(lcd_data14), MODE(1) | PULLUDEN}, /* NOR_A18 */
+ {OFFSET(lcd_data15), MODE(1) | PULLUDEN}, /* NOR_A19 */
+ {OFFSET(gpmc_a4), MODE(4)}, /* NOR_A20 */
+ {OFFSET(gpmc_a5), MODE(4)}, /* NOR_A21 */
+ {OFFSET(gpmc_a6), MODE(4)}, /* NOR_A22 */
+ {OFFSET(gpmc_ad0), MODE(0) | RXACTIVE}, /* NOR_AD0 */
+ {OFFSET(gpmc_ad1), MODE(0) | RXACTIVE}, /* NOR_AD1 */
+ {OFFSET(gpmc_ad2), MODE(0) | RXACTIVE}, /* NOR_AD2 */
+ {OFFSET(gpmc_ad3), MODE(0) | RXACTIVE}, /* NOR_AD3 */
+ {OFFSET(gpmc_ad4), MODE(0) | RXACTIVE}, /* NOR_AD4 */
+ {OFFSET(gpmc_ad5), MODE(0) | RXACTIVE}, /* NOR_AD5 */
+ {OFFSET(gpmc_ad6), MODE(0) | RXACTIVE}, /* NOR_AD6 */
+ {OFFSET(gpmc_ad7), MODE(0) | RXACTIVE}, /* NOR_AD7 */
+ {OFFSET(gpmc_ad8), MODE(0) | RXACTIVE}, /* NOR_AD8 */
+ {OFFSET(gpmc_ad9), MODE(0) | RXACTIVE}, /* NOR_AD9 */
+ {OFFSET(gpmc_ad10), MODE(0) | RXACTIVE}, /* NOR_AD10 */
+ {OFFSET(gpmc_ad11), MODE(0) | RXACTIVE}, /* NOR_AD11 */
+ {OFFSET(gpmc_ad12), MODE(0) | RXACTIVE}, /* NOR_AD12 */
+ {OFFSET(gpmc_ad13), MODE(0) | RXACTIVE}, /* NOR_AD13 */
+ {OFFSET(gpmc_ad14), MODE(0) | RXACTIVE}, /* NOR_AD14 */
+ {OFFSET(gpmc_ad15), MODE(0) | RXACTIVE}, /* NOR_AD15 */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, /* NOR_CE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUP_EN)}, /* NOR_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUP_EN)}, /* NOR_WEN */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NOR WAIT */
+ {OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDEN}, /* NOR RESET */
+ {-1},
+};
+#endif
+
+static const __maybe_unused struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
+ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux mmc1_pin_mux[] = {
+ {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE)}, /* MMC1_DAT3 */
+ {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE)}, /* MMC1_DAT2 */
+ {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE)}, /* MMC1_DAT1 */
+ {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE)}, /* MMC1_DAT0 */
+ {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */
+ {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */
+ {OFFSET(uart1_rxd), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */
+ {OFFSET(mcasp0_fsx), (MODE(4) | RXACTIVE)}, /* MMC1_CD */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux spi0_pin_mux[] = {
+ {OFFSET(spi0_sclk), MODE(0) | PULLUDEN | RXACTIVE}, /*SPI0_SCLK */
+ {OFFSET(spi0_d0), MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE}, /*SPI0_D0 */
+ {OFFSET(spi0_d1), MODE(0) | PULLUDEN | RXACTIVE}, /*SPI0_D1 */
+ {OFFSET(spi0_cs0), MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE}, /*SPI0_CS0 */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux spi1_pin_mux[] = {
+ {OFFSET(mcasp0_aclkx), MODE(3) | PULLUDEN | RXACTIVE}, /*SPI1_SCLK */
+ {OFFSET(mcasp0_fsx), MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE}, /*SPI1_D0 */
+ {OFFSET(mcasp0_axr0), MODE(3) | PULLUDEN | RXACTIVE}, /*SPI1_D1 */
+ {OFFSET(mcasp0_ahclkr), MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE}, /*SPI1_CS0 */
+ {-1},
+};
+
+/*
+ * Configure the pin mux for the module
+ */
+static void configure_module_pin_mux(const struct module_pin_mux *mod_pin_mux)
+{
+ int i;
+
+ if (!mod_pin_mux)
+ return;
+
+ for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
+ MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+}
+
+void enable_mii1_pin_mux(void)
+{
+ configure_module_pin_mux(mii1_pin_mux);
+}
+
+void enable_i2c0_pin_mux(void)
+{
+ configure_module_pin_mux(i2c0_pin_mux);
+}
+
+void enable_i2c1_pin_mux(void)
+{
+ configure_module_pin_mux(i2c1_pin_mux);
+}
+
+void enable_i2c2_pin_mux(void)
+{
+ configure_module_pin_mux(i2c2_pin_mux);
+}
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
index 654c104..f9bfd36 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-clock.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
@@ -19,7 +19,179 @@
#ifndef _AM33XX_CLOCKS_H_
#define _AM33XX_CLOCKS_H_
+#include "am33xx-silicon.h"
+
/** PRM Clock Regs */
#define PRM_RSTCTRL 0x0f00
+/* Put the pll config values over here */
+
+#define OSC 24
+
+/* MAIN PLL Fdll = 1 GHZ, */
+#define MPUPLL_M_500 500 /* 125 * n */
+#define MPUPLL_M_550 550 /* 125 * n */
+#define MPUPLL_M_600 600 /* 125 * n */
+#define MPUPLL_M_720 720 /* 125 * n */
+
+#define MPUPLL_N 23 /* (n -1 ) */
+#define MPUPLL_M2 1
+
+/* Core PLL Fdll = 1 GHZ, */
+#define COREPLL_M 1000 /* 125 * n */
+#define COREPLL_N 23 /* (n -1 ) */
+
+#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */
+#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */
+#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */
+
+/*
+ * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll
+ * frequency needs to be set to 960 MHZ. Hence,
+ * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
+ */
+#define PERPLL_M 960
+#define PERPLL_N 23
+#define PERPLL_M2 5
+
+/* DDR Freq is 166 MHZ for now*/
+/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
+//#if (CONFIG_AM335X_EVM_IS_13x13 == 1)
+#if 0
+#define DDRPLL_M 166 /* M/N + 1 = 25/3 */
+#else
+#define DDRPLL_M 266
+#endif
+
+#define DDRPLL_N 23
+#define DDRPLL_M2 1
+
+/* PRCM */
+/* Module Offsets */
+#define CM_PER (OMAP_PRM_BASE + 0x0)
+#define CM_WKUP (OMAP_PRM_BASE + 0x400)
+#define CM_DPLL (OMAP_PRM_BASE + 0x500)
+#define CM_DEVICE (OMAP_PRM_BASE + 0x0700)
+#define CM_CEFUSE (OMAP_PRM_BASE + 0x0A00)
+#define PRM_DEVICE (OMAP_PRM_BASE + 0x0F00)
+/* Register Offsets */
+/* Core PLL ADPLLS */
+#define CM_CLKSEL_DPLL_CORE (CM_WKUP + 0x68)
+#define CM_CLKMODE_DPLL_CORE (CM_WKUP + 0x90)
+
+/* Core HSDIV */
+#define CM_DIV_M4_DPLL_CORE (CM_WKUP + 0x80)
+#define CM_DIV_M5_DPLL_CORE (CM_WKUP + 0x84)
+#define CM_DIV_M6_DPLL_CORE (CM_WKUP + 0xD8)
+#define CM_IDLEST_DPLL_CORE (CM_WKUP + 0x5c)
+
+/* Peripheral PLL */
+#define CM_CLKSEL_DPLL_PER (CM_WKUP + 0x9c)
+#define CM_CLKMODE_DPLL_PER (CM_WKUP + 0x8c)
+#define CM_DIV_M2_DPLL_PER (CM_WKUP + 0xAC)
+#define CM_IDLEST_DPLL_PER (CM_WKUP + 0x70)
+
+/* Display PLL */
+#define CM_CLKSEL_DPLL_DISP (CM_WKUP + 0x54)
+#define CM_CLKMODE_DPLL_DISP (CM_WKUP + 0x98)
+#define CM_DIV_M2_DPLL_DISP (CM_WKUP + 0xA4)
+
+/* DDR PLL */
+#define CM_CLKSEL_DPLL_DDR (CM_WKUP + 0x40)
+#define CM_CLKMODE_DPLL_DDR (CM_WKUP + 0x94)
+#define CM_DIV_M2_DPLL_DDR (CM_WKUP + 0xA0)
+#define CM_IDLEST_DPLL_DDR (CM_WKUP + 0x34)
+
+/* MPU PLL */
+#define CM_CLKSEL_DPLL_MPU (CM_WKUP + 0x2c)
+#define CM_CLKMODE_DPLL_MPU (CM_WKUP + 0x88)
+#define CM_DIV_M2_DPLL_MPU (CM_WKUP + 0xA8)
+#define CM_IDLEST_DPLL_MPU (CM_WKUP + 0x20)
+
+/* TIMER Clock Source Select */
+#define CLKSEL_TIMER2_CLK (CM_DPLL + 0x8)
+
+/* Interconnect clocks */
+#define CM_PER_L4LS_CLKCTRL (CM_PER + 0x60) /* EMIF */
+#define CM_PER_L4FW_CLKCTRL (CM_PER + 0x64) /* EMIF FW */
+#define CM_PER_L3_CLKCTRL (CM_PER + 0xE0) /* OCMC RAM */
+#define CM_PER_L3_INSTR_CLKCTRL (CM_PER + 0xDC)
+#define CM_PER_L4HS_CLKCTRL (CM_PER + 0x120)
+#define CM_WKUP_L4WKUP_CLKCTRL (CM_WKUP + 0x0c)/* UART0 */
+
+/* Domain Wake UP */
+#define CM_WKUP_CLKSTCTRL (CM_WKUP + 0) /* UART0 */
+#define CM_PER_L4LS_CLKSTCTRL (CM_PER + 0x0) /* TIMER2 */
+#define CM_PER_L3_CLKSTCTRL (CM_PER + 0x0c) /* EMIF */
+#define CM_PER_L4FW_CLKSTCTRL (CM_PER + 0x08) /* EMIF FW */
+#define CM_PER_L3S_CLKSTCTRL (CM_PER + 0x4)
+#define CM_PER_L4HS_CLKSTCTRL (CM_PER + 0x011c)
+#define CM_CEFUSE_CLKSTCTRL (CM_CEFUSE + 0x0)
+
+/* Module Enable Registers */
+#define CM_PER_TIMER2_CLKCTRL (CM_PER + 0x80) /* Timer2 */
+#define CM_WKUP_UART0_CLKCTRL (CM_WKUP + 0xB4)/* UART0 */
+#define CM_WKUP_CONTROL_CLKCTRL (CM_WKUP + 0x4) /* Control Module */
+#define CM_PER_EMIF_CLKCTRL (CM_PER + 0x28) /* EMIF */
+#define CM_PER_EMIF_FW_CLKCTRL (CM_PER + 0xD0) /* EMIF FW */
+#define CM_PER_GPMC_CLKCTRL (CM_PER + 0x30) /* GPMC */
+#define CM_PER_ELM_CLKCTRL (CM_PER + 0x40) /* ELM */
+#define CM_PER_SPI0_CLKCTRL (CM_PER + 0x4c) /* SPI0 */
+#define CM_PER_SPI1_CLKCTRL (CM_PER + 0x50) /* SPI1 */
+#define CM_WKUP_I2C0_CLKCTRL (CM_WKUP + 0xB8) /* I2C0 */
+#define CM_PER_CPGMAC0_CLKCTRL (CM_PER + 0x14) /* Ethernet */
+#define CM_PER_CPSW_CLKSTCTRL (CM_PER + 0x144)/* Ethernet */
+#define CM_PER_OCMCRAM_CLKCTRL (CM_PER + 0x2C) /* OCMC RAM */
+#define CM_PER_GPIO2_CLKCTRL (CM_PER + 0xB0) /* GPIO2 */
+#define CM_PER_UART3_CLKCTRL (CM_PER + 0x74) /* UART3 */
+#define CM_PER_I2C1_CLKCTRL (CM_PER + 0x48) /* I2C1 */
+#define CM_PER_I2C2_CLKCTRL (CM_PER + 0x44) /* I2C2 */
+#define CM_WKUP_GPIO0_CLKCTRL (CM_WKUP + 0x8) /* GPIO0 */
+
+#define CM_PER_MMC0_CLKCTRL (CM_PER + 0x3C)
+#define CM_PER_MMC1_CLKCTRL (CM_PER + 0xF4)
+#define CM_PER_MMC2_CLKCTRL (CM_PER + 0xF8)
+
+/* PRCM */
+#define CM_DPLL_OFFSET (OMAP_PRM_BASE + 0x0300)
+
+#define CM_ALWON_WDTIMER_CLKCTRL (OMAP_PRM_BASE + 0x158C)
+#define CM_ALWON_SPI_CLKCTRL (OMAP_PRM_BASE + 0x1590)
+#define CM_ALWON_CONTROL_CLKCTRL (OMAP_PRM_BASE + 0x15C4)
+
+#define CM_ALWON_L3_SLOW_CLKSTCTRL (OMAP_PRM_BASE + 0x1400)
+
+#define CM_ALWON_GPIO_0_CLKCTRL (OMAP_PRM_BASE + 0x155c)
+#define CM_ALWON_GPIO_0_OPTFCLKEN_DBCLK (OMAP_PRM_BASE + 0x155c)
+
+/* Ethernet */
+#define CM_ETHERNET_CLKSTCTRL (OMAP_PRM_BASE + 0x1404)
+#define CM_ALWON_ETHERNET_0_CLKCTRL (OMAP_PRM_BASE + 0x15D4)
+#define CM_ALWON_ETHERNET_1_CLKCTRL (OMAP_PRM_BASE + 0x15D8)
+
+/* UARTs */
+#define CM_ALWON_UART_0_CLKCTRL (OMAP_PRM_BASE + 0x1550)
+#define CM_ALWON_UART_1_CLKCTRL (OMAP_PRM_BASE + 0x1554)
+#define CM_ALWON_UART_2_CLKCTRL (OMAP_PRM_BASE + 0x1558)
+
+/* I2C */
+/* Note: In ti814x I2C0 and I2C2 have common clk control */
+#define CM_ALWON_I2C_0_CLKCTRL (OMAP_PRM_BASE + 0x1564)
+
+/* EMIF4 PRCM Defintion */
+#define CM_DEFAULT_L3_FAST_CLKSTCTRL (OMAP_PRM_BASE + 0x0508)
+#define CM_DEFAULT_EMIF_0_CLKCTRL (OMAP_PRM_BASE + 0x0520)
+#define CM_DEFAULT_EMIF_1_CLKCTRL (OMAP_PRM_BASE + 0x0524)
+#define CM_DEFAULT_DMM_CLKCTRL (OMAP_PRM_BASE + 0x0528)
+#define CM_DEFAULT_FW_CLKCTRL (OMAP_PRM_BASE + 0x052C)
+
+/* ALWON PRCM */
+#define CM_ALWON_OCMC_0_CLKSTCTRL CM_PER_L3_CLKSTCTRL
+#define CM_ALWON_OCMC_0_CLKCTRL CM_PER_OCMCRAM_CLKCTRL
+
+#define CM_ALWON_GPMC_CLKCTRL CM_PER_GPMC_CLKCTRL
+
+extern void pll_init(void);
+extern void enable_ddr_clocks(void);
+
#endif /* endif _AM33XX_CLOCKS_H_ */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-mux.h b/arch/arm/mach-omap/include/mach/am33xx-mux.h
new file mode 100644
index 0000000..ed328f5
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/am33xx-mux.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __AM33XX_MUX_H__
+#define __AM33XX_MUX_H__
+
+extern void enable_mii1_pin_mux(void);
+extern void enable_i2c0_pin_mux(void);
+extern void enable_i2c1_pin_mux(void);
+extern void enable_i2c2_pin_mux(void);
+extern void enable_uart0_pin_mux(void);
+
+#endif /*__AM33XX_MUX_H__ */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index 7b13991..ef8797f 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -27,7 +27,6 @@
#define AM33XX_UART1_BASE (AM33XX_L4_PER_BASE + 0x22000)
#define AM33XX_UART2_BASE (AM33XX_L4_PER_BASE + 0x24000)
-
/* EMFI Registers */
#define AM33XX_EMFI0_BASE 0x4C000000
@@ -48,4 +47,157 @@
#define PRM_RSTCTRL_RESET 0x1
+/* CTRL */
+#define AM33XX_CTRL_BASE (AM33XX_L4_WKUP_BASE + 0x210000)
+#define OMAP_CTRL_BASE (AM33XX_CTRL_BASE)
+
+/* Watchdog Timer */
+#define WDT_BASE 0x44E35000
+
+/* EMIF Base address */
+#define EMIF4_0_CFG_BASE 0x4C000000
+#define EMIF4_1_CFG_BASE 0x4D000000
+#define DMM_BASE 0x4E000000
+
+#define AM335X_CPSW_BASE 0x4A100000
+#define AM335X_CPSW_MDIO_BASE 0x4A101000
+
+/*DMM & EMIF4 MMR Declaration*/
+#define DMM_LISA_MAP__0 (DMM_BASE + 0x40)
+#define DMM_LISA_MAP__1 (DMM_BASE + 0x44)
+#define DMM_LISA_MAP__2 (DMM_BASE + 0x48)
+#define DMM_LISA_MAP__3 (DMM_BASE + 0x4C)
+#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x460)
+
+#define EMIF_MOD_ID_REV (EMIF4_0_CFG_BASE + 0x0)
+#define EMIF4_0_SDRAM_STATUS (EMIF4_0_CFG_BASE + 0x04)
+#define EMIF4_0_SDRAM_CONFIG (EMIF4_0_CFG_BASE + 0x08)
+#define EMIF4_0_SDRAM_CONFIG2 (EMIF4_0_CFG_BASE + 0x0C)
+#define EMIF4_0_SDRAM_REF_CTRL (EMIF4_0_CFG_BASE + 0x10)
+#define EMIF4_0_SDRAM_REF_CTRL_SHADOW (EMIF4_0_CFG_BASE + 0x14)
+#define EMIF4_0_SDRAM_TIM_1 (EMIF4_0_CFG_BASE + 0x18)
+#define EMIF4_0_SDRAM_TIM_1_SHADOW (EMIF4_0_CFG_BASE + 0x1C)
+#define EMIF4_0_SDRAM_TIM_2 (EMIF4_0_CFG_BASE + 0x20)
+#define EMIF4_0_SDRAM_TIM_2_SHADOW (EMIF4_0_CFG_BASE + 0x24)
+#define EMIF4_0_SDRAM_TIM_3 (EMIF4_0_CFG_BASE + 0x28)
+#define EMIF4_0_SDRAM_TIM_3_SHADOW (EMIF4_0_CFG_BASE + 0x2C)
+#define EMIF0_0_SDRAM_MGMT_CTRL (EMIF4_0_CFG_BASE + 0x38)
+#define EMIF0_0_SDRAM_MGMT_CTRL_SHD (EMIF4_0_CFG_BASE + 0x3C)
+#define EMIF4_0_DDR_PHY_CTRL_1 (EMIF4_0_CFG_BASE + 0xE4)
+#define EMIF4_0_DDR_PHY_CTRL_1_SHADOW (EMIF4_0_CFG_BASE + 0xE8)
+#define EMIF4_0_DDR_PHY_CTRL_2 (EMIF4_0_CFG_BASE + 0xEC)
+#define EMIF4_0_IODFT_TLGC (EMIF4_0_CFG_BASE + 0x60)
+
+#define EMIF4_1_SDRAM_CONFIG (EMIF4_1_CFG_BASE + 0x08)
+#define EMIF4_1_SDRAM_CONFIG2 (EMIF4_1_CFG_BASE + 0x0C)
+#define EMIF4_1_SDRAM_REF_CTRL (EMIF4_1_CFG_BASE + 0x10)
+#define EMIF4_1_SDRAM_REF_CTRL_SHADOW (EMIF4_1_CFG_BASE + 0x14)
+#define EMIF4_1_SDRAM_TIM_1 (EMIF4_1_CFG_BASE + 0x18)
+#define EMIF4_1_SDRAM_TIM_1_SHADOW (EMIF4_1_CFG_BASE + 0x1C)
+#define EMIF4_1_SDRAM_TIM_2 (EMIF4_1_CFG_BASE + 0x20)
+#define EMIF4_1_SDRAM_TIM_2_SHADOW (EMIF4_1_CFG_BASE + 0x24)
+#define EMIF4_1_SDRAM_TIM_3 (EMIF4_1_CFG_BASE + 0x28)
+#define EMIF4_1_SDRAM_TIM_3_SHADOW (EMIF4_1_CFG_BASE + 0x2C)
+#define EMIF4_1_DDR_PHY_CTRL_1 (EMIF4_1_CFG_BASE + 0xE4)
+#define EMIF4_1_DDR_PHY_CTRL_1_SHADOW (EMIF4_1_CFG_BASE + 0xE8)
+#define EMIF4_1_IODFT_TLGC (EMIF4_1_CFG_BASE + 0x60)
+
+#define VTP0_CTRL_REG 0x44E10E0C
+#define VTP1_CTRL_REG 0x48140E10
+
+/* OCMC */
+#define SRAM0_SIZE (0x1B400) /* 109 KB */
+#define SRAM_GPMC_STACK_SIZE (0x40)
+
+#define LOW_LEVEL_SRAM_STACK (SRAM0_START + SRAM0_SIZE - 4)
+
+/* GPMC related */
+#define GPMC_CONFIG_CS0 (0x60)
+#define GPMC_CONFIG_CS0_BASE (GPMC_BASE + GPMC_CONFIG_CS0)
+#define GPMC_CONFIG1 (0x00)
+#define GPMC_CONFIG2 (0x04)
+#define GPMC_CONFIG3 (0x08)
+#define GPMC_CONFIG4 (0x0C)
+#define GPMC_CONFIG5 (0x10)
+#define GPMC_CONFIG6 (0x14)
+#define GPMC_CONFIG7 (0x18)
+
+/* DDR offsets */
+#define DDR_PHY_BASE_ADDR 0x44E12000
+#define DDR_IO_CTRL 0x44E10E04
+#define DDR_CKE_CTRL 0x44E1131C
+#define CONTROL_BASE_ADDR 0x44E10000
+
+#define DDR_CMD0_IOCTRL (CONTROL_BASE_ADDR + 0x1404)
+#define DDR_CMD1_IOCTRL (CONTROL_BASE_ADDR + 0x1408)
+#define DDR_CMD2_IOCTRL (CONTROL_BASE_ADDR + 0x140C)
+#define DDR_DATA0_IOCTRL (CONTROL_BASE_ADDR + 0x1440)
+#define DDR_DATA1_IOCTRL (CONTROL_BASE_ADDR + 0x1444)
+
+#define CMD0_CTRL_SLAVE_RATIO_0 (DDR_PHY_BASE_ADDR + 0x01C)
+#define CMD0_CTRL_SLAVE_FORCE_0 (DDR_PHY_BASE_ADDR + 0x020)
+#define CMD0_CTRL_SLAVE_DELAY_0 (DDR_PHY_BASE_ADDR + 0x024)
+#define CMD0_DLL_LOCK_DIFF_0 (DDR_PHY_BASE_ADDR + 0x028)
+#define CMD0_INVERT_CLKOUT_0 (DDR_PHY_BASE_ADDR + 0x02C)
+
+#define CMD1_CTRL_SLAVE_RATIO_0 (DDR_PHY_BASE_ADDR + 0x050)
+#define CMD1_CTRL_SLAVE_FORCE_0 (DDR_PHY_BASE_ADDR + 0x054)
+#define CMD1_CTRL_SLAVE_DELAY_0 (DDR_PHY_BASE_ADDR + 0x058)
+#define CMD1_DLL_LOCK_DIFF_0 (DDR_PHY_BASE_ADDR + 0x05C)
+#define CMD1_INVERT_CLKOUT_0 (DDR_PHY_BASE_ADDR + 0x060)
+
+#define CMD2_CTRL_SLAVE_RATIO_0 (DDR_PHY_BASE_ADDR + 0x084)
+#define CMD2_CTRL_SLAVE_FORCE_0 (DDR_PHY_BASE_ADDR + 0x088)
+#define CMD2_CTRL_SLAVE_DELAY_0 (DDR_PHY_BASE_ADDR + 0x08C)
+#define CMD2_DLL_LOCK_DIFF_0 (DDR_PHY_BASE_ADDR + 0x090)
+#define CMD2_INVERT_CLKOUT_0 (DDR_PHY_BASE_ADDR + 0x094)
+
+#define DATA0_RD_DQS_SLAVE_RATIO_0 (DDR_PHY_BASE_ADDR + 0x0C8)
+#define DATA0_RD_DQS_SLAVE_RATIO_1 (DDR_PHY_BASE_ADDR + 0x0CC)
+#define DATA0_WR_DQS_SLAVE_RATIO_0 (DDR_PHY_BASE_ADDR + 0x0DC)
+
+#define DATA0_WR_DQS_SLAVE_RATIO_1 (DDR_PHY_BASE_ADDR + 0x0E0)
+#define DATA0_WRLVL_INIT_RATIO_0 (DDR_PHY_BASE_ADDR + 0x0F0)
+
+#define DATA0_WRLVL_INIT_RATIO_1 (DDR_PHY_BASE_ADDR + 0x0F4)
+#define DATA0_GATELVL_INIT_RATIO_0 (DDR_PHY_BASE_ADDR + 0x0FC)
+
+#define DATA0_GATELVL_INIT_RATIO_1 (DDR_PHY_BASE_ADDR + 0x100)
+#define DATA0_FIFO_WE_SLAVE_RATIO_0 (DDR_PHY_BASE_ADDR + 0x108)
+
+#define DATA0_FIFO_WE_SLAVE_RATIO_1 (DDR_PHY_BASE_ADDR + 0x10C)
+#define DATA0_WR_DATA_SLAVE_RATIO_0 (DDR_PHY_BASE_ADDR + 0x120)
+
+#define DATA0_WR_DATA_SLAVE_RATIO_1 (DDR_PHY_BASE_ADDR + 0x124)
+#define DATA0_DLL_LOCK_DIFF_0 (DDR_PHY_BASE_ADDR + 0x138)
+
+#define DATA0_RANK0_DELAYS_0 (DDR_PHY_BASE_ADDR + 0x134)
+#define DATA1_RANK0_DELAYS_0 (DDR_PHY_BASE_ADDR + 0x1D8)
+
+/* Ethernet MAC ID from EFuse */
+#define MAC_ID0_LO (AM33XX_CTRL_BASE + 0x630)
+#define MAC_ID0_HI (AM33XX_CTRL_BASE + 0x634)
+#define MAC_ID1_LO (AM33XX_CTRL_BASE + 0x638)
+#define MAC_ID1_HI (AM33XX_CTRL_BASE + 0x63c)
+#define MAC_MII_SEL (AM33XX_CTRL_BASE + 0x650)
+
+/* WDT related */
+#define WDT_WDSC (WDT_BASE + 0x010)
+#define WDT_WDST (WDT_BASE + 0x014)
+#define WDT_WISR (WDT_BASE + 0x018)
+#define WDT_WIER (WDT_BASE + 0x01C)
+#define WDT_WWER (WDT_BASE + 0x020)
+#define WDT_WCLR (WDT_BASE + 0x024)
+#define WDT_WCRR (WDT_BASE + 0x028)
+#define WDT_WLDR (WDT_BASE + 0x02C)
+#define WDT_WTGR (WDT_BASE + 0x030)
+#define WDT_WWPS (WDT_BASE + 0x034)
+#define WDT_WDLY (WDT_BASE + 0x044)
+#define WDT_WSPR (WDT_BASE + 0x048)
+#define WDT_WIRQEOI (WDT_BASE + 0x050)
+#define WDT_WIRQSTATRAW (WDT_BASE + 0x054)
+#define WDT_WIRQSTAT (WDT_BASE + 0x058)
+#define WDT_WIRQENSET (WDT_BASE + 0x05C)
+#define WDT_WIRQENCLR (WDT_BASE + 0x060)
+
#endif
diff --git a/arch/arm/mach-omap/include/mach/xload.h b/arch/arm/mach-omap/include/mach/xload.h
index 44d3754..d632735 100644
--- a/arch/arm/mach-omap/include/mach/xload.h
+++ b/arch/arm/mach-omap/include/mach/xload.h
@@ -9,6 +9,7 @@ enum omap_boot_src {
OMAP_BOOTSRC_USB1,
};
+enum omap_boot_src am33xx_bootsrc(void);
enum omap_boot_src omap3_bootsrc(void);
enum omap_boot_src omap4_bootsrc(void);
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
index 240d3ff..60357aa 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -159,7 +159,9 @@ static void *omap4_xload_boot_usb(void){
enum omap_boot_src omap_bootsrc(void)
{
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_AM33XX)
+ return am33xx_bootsrc();
+#elif defined(CONFIG_ARCH_OMAP3)
return omap3_bootsrc();
#elif defined(CONFIG_ARCH_OMAP4)
return omap4_bootsrc();
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-12-11 15:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-12-11 15:15 [PATCH] beaglebone: add first-stage support for AM335x and board Jan Luebbe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox