mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 06/10] ARM i.MX31 pcm037: Switch to new environment
Date: Wed, 12 Dec 2012 21:09:47 +0100	[thread overview]
Message-ID: <1355342991-549-7-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1355342991-549-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boards/pcm037/env/boot/nand-ubi      |   10 +++++
 arch/arm/boards/pcm037/env/config             |   52 -------------------------
 arch/arm/boards/pcm037/env/init/config-board  |    7 ++++
 arch/arm/boards/pcm037/env/init/mtdparts-nand |   11 ++++++
 arch/arm/boards/pcm037/env/init/mtdparts-nor  |   11 ++++++
 arch/arm/configs/pcm037_defconfig             |   32 +++++++++++----
 arch/arm/mach-imx/Kconfig                     |    1 +
 7 files changed, 65 insertions(+), 59 deletions(-)
 create mode 100644 arch/arm/boards/pcm037/env/boot/nand-ubi
 delete mode 100644 arch/arm/boards/pcm037/env/config
 create mode 100644 arch/arm/boards/pcm037/env/init/config-board
 create mode 100644 arch/arm/boards/pcm037/env/init/mtdparts-nand
 create mode 100644 arch/arm/boards/pcm037/env/init/mtdparts-nor

diff --git a/arch/arm/boards/pcm037/env/boot/nand-ubi b/arch/arm/boards/pcm037/env/boot/nand-ubi
new file mode 100644
index 0000000..67b0cb4
--- /dev/null
+++ b/arch/arm/boards/pcm037/env/boot/nand-ubi
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+	boot-menu-add-entry "$0" "nand (UBI)"
+	exit
+fi
+
+global.bootm.image="/dev/nand0.kernel.bb"
+#global.bootm.oftree="/env/oftree"
+global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root rootfstype=ubifs"
diff --git a/arch/arm/boards/pcm037/env/config b/arch/arm/boards/pcm037/env/config
deleted file mode 100644
index 569bfe4..0000000
--- a/arch/arm/boards/pcm037/env/config
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-
-global.hostname=pcm037
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-${global.hostname}.$rootfs_type
-
-kernelimage=zImage-${global.hostname}
-#kernelimage=uImage-${global.hostname}
-#kernelimage=Image-${global.hostname}
-#kernelimage=Image-${global.hostname}.lzo
-
-if [ -n $user ]; then
-	kernelimage="$user"-"$kernelimage"
-	nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
-	rootfsimage="$user"-"$rootfsimage"
-else
-	nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-nor_parts="256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root)"
-rootfs_mtdblock_nor=3
-
-nand_parts="256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root)"
-rootfs_mtdblock_nand=7
-nand_device="mxc_nand"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
-
diff --git a/arch/arm/boards/pcm037/env/init/config-board b/arch/arm/boards/pcm037/env/init/config-board
new file mode 100644
index 0000000..03f9e97
--- /dev/null
+++ b/arch/arm/boards/pcm037/env/init/config-board
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=pcm037
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/pcm037/env/init/mtdparts-nand b/arch/arm/boards/pcm037/env/init/mtdparts-nand
new file mode 100644
index 0000000..84220b7
--- /dev/null
+++ b/arch/arm/boards/pcm037/env/init/mtdparts-nand
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+	init-menu-add-entry "$0" "NAND partitions"
+	exit
+fi
+
+mtdparts="512k(nand0.barebox)ro,128k(nand0.bareboxenv),4M(nand0.kernel),-(nand0.root)"
+kernelname="mxc_nand"
+
+mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/pcm037/env/init/mtdparts-nor b/arch/arm/boards/pcm037/env/init/mtdparts-nor
new file mode 100644
index 0000000..2ef6ead
--- /dev/null
+++ b/arch/arm/boards/pcm037/env/init/mtdparts-nor
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+	init-menu-add-entry "$0" "NOR partitions"
+	exit
+fi
+
+mtdparts="256k(nor0.barebox)ro,128k(nor0.bareboxenv),4M(nor0.kernel),-(nor0.root)"
+kernelname="physmap-flash.0"
+
+mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
index 5a527d5..7c630a5 100644
--- a/arch/arm/configs/pcm037_defconfig
+++ b/arch/arm/configs/pcm037_defconfig
@@ -11,25 +11,36 @@ CONFIG_MALLOC_SIZE=0x01000000
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_LONGHELP=y
-CONFIG_GLOB=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
 CONFIG_PARTITION=y
 CONFIG_PARTITION_DISK=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pcm037/env"
+CONFIG_RESET_SOURCE=y
 CONFIG_CMD_EDIT=y
 CONFIG_CMD_SLEEP=y
+CONFIG_CMD_MSLEEP=y
 CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_LOADENV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_IOMEM=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_BOOTM_VERBOSE=y
@@ -37,23 +48,24 @@ CONFIG_CMD_BOOTM_INITRD=y
 CONFIG_CMD_BOOTM_OFTREE=y
 CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
 CONFIG_CMD_UIMAGE=y
-# CONFIG_CMD_BOOTZ is not set
 # CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_BAREBOX_UPDATE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_CLK=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
-CONFIG_NET_NFS=y
 CONFIG_NET_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
 CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
 CONFIG_DRIVER_NET_SMC911X=y
 CONFIG_NET_USB=y
 CONFIG_NET_USB_ASIX=y
@@ -65,5 +77,11 @@ CONFIG_NAND_IMX=y
 CONFIG_UBI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
 CONFIG_ZLIB=y
 CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ec4f864..33724e9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -333,6 +333,7 @@ config MACH_PCM037
 	bool "phyCORE-i.MX31"
 	select MACH_HAS_LOWLEVEL_INIT
 	select USB_ULPI if USB
+	select HAVE_DEFAULT_ENVIRONMENT_NEW
 	select ARCH_HAS_L2X0
 	help
 	  Say Y here if you are using Phytec's phyCORE-i.MX31 (pcm037) equipped
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-12-12 20:10 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-12 20:09 [PATCH] i.MX31/pcm037 fixes and updates Sascha Hauer
2012-12-12 20:09 ` [PATCH 01/10] ARM i.MX31: Fix gpio device names Sascha Hauer
2012-12-12 20:09 ` [PATCH 02/10] ARM i.MX31 pcm037: Force internal phy Sascha Hauer
2012-12-12 20:09 ` [PATCH 03/10] ARM i.MX31 pcm037: make board bootable again Sascha Hauer
2012-12-12 20:09 ` [PATCH 04/10] ARM i.MX31 pcm037: remove unused defines Sascha Hauer
2012-12-12 20:09 ` [PATCH 05/10] ARM i.MX31 pcm037: rewrite lowlevel init code in C Sascha Hauer
2012-12-12 20:09 ` Sascha Hauer [this message]
2012-12-12 20:09 ` [PATCH 07/10] ARM i.MX31: sync iomux with kernel Sascha Hauer
2012-12-12 20:09 ` [PATCH 08/10] ARM i.MX31 pcm037: add more iomux pins Sascha Hauer
2012-12-12 20:09 ` [PATCH 09/10] ARM i.MX31: Add mmc register convenience functions Sascha Hauer
2012-12-12 20:09 ` [PATCH 10/10] ARM i.MX31 pcm037: add mmc support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1355342991-549-7-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox