* AM33xx and BeagleBone support
@ 2012-12-18 14:22 Jan Luebbe
2012-12-18 14:22 ` [PATCH 01/19] ARM omap: remove unused function Jan Luebbe
` (18 more replies)
0 siblings, 19 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
This is an updated series based on current master, with more cleanup from
Sascha's. Some of these patches should already be on next.
The CPSW driver is not yet intended for merging and included only for those
who want to try it out.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 01/19] ARM omap: remove unused function
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 02/19] ARM omap4: remove unused struct Jan Luebbe
` (17 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/sys_info.h | 1 -
arch/arm/mach-omap/omap3_generic.c | 19 -------------------
2 files changed, 20 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/sys_info.h b/arch/arm/mach-omap/include/mach/sys_info.h
index e54791d..4d9b138 100644
--- a/arch/arm/mach-omap/include/mach/sys_info.h
+++ b/arch/arm/mach-omap/include/mach/sys_info.h
@@ -85,7 +85,6 @@ u32 get_cpu_rev(void);
u32 get_sdr_cs_size(u32 offset);
u32 get_sdr_cs1_base(void);
inline u32 get_sysboot_value(void);
-u32 get_gpmc0_base(void);
u32 get_base(void);
u32 running_in_flash(void);
u32 running_in_sram(void);
diff --git a/arch/arm/mach-omap/omap3_generic.c b/arch/arm/mach-omap/omap3_generic.c
index 7cfb3e4..cbac06f 100644
--- a/arch/arm/mach-omap/omap3_generic.c
+++ b/arch/arm/mach-omap/omap3_generic.c
@@ -204,25 +204,6 @@ inline u32 get_sysboot_value(void)
}
/**
- * @brief Return the current CS0 base address
- *
- * Return current address hardware will be
- * fetching from. The below effectively gives what is correct, its a bit
- * mis-leading compared to the TRM. For the most general case the mask
- * needs to be also taken into account this does work in practice.
- *
- * @return base address
- */
-u32 get_gpmc0_base(void)
-{
- u32 b;
- b = readl(GPMC_REG(CONFIG7_0));
- b &= 0x1F; /* keep base [5:0] */
- b = b << 24; /* ret 0x0b000000 */
- return b;
-}
-
-/**
* @brief Get the upper address of current execution
*
* we can use this to figure out if we are running in SRAM /
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 02/19] ARM omap4: remove unused struct
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
2012-12-18 14:22 ` [PATCH 01/19] ARM omap: remove unused function Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 03/19] ARM omap4: Add missing assembly protection in header file Jan Luebbe
` (16 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/omap4-silicon.h | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
index 008eafb..8ce1882 100644
--- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
@@ -153,15 +153,6 @@
#define PRM_RSTCTRL PRM_DEVICE_BASE
#define PRM_RSTCTRL_RESET 0x01
-#ifndef __ASSEMBLY__
-
-struct s32ktimer {
- unsigned char res[0x10];
- unsigned int s32k_cr; /* 0x10 */
-};
-
-#endif /* __ASSEMBLY__ */
-
/*
* Non-secure SRAM Addresses
* Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 03/19] ARM omap4: Add missing assembly protection in header file
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
2012-12-18 14:22 ` [PATCH 01/19] ARM omap: remove unused function Jan Luebbe
2012-12-18 14:22 ` [PATCH 02/19] ARM omap4: remove unused struct Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 04/19] ARM omap4: Add missing double include protection Jan Luebbe
` (15 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/omap4-silicon.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
index 8ce1882..127257d 100644
--- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
@@ -184,6 +184,8 @@
#define OMAP4460_ES1_0 6
#define OMAP4460_ES1_1 7
+#ifndef __ASSEMBLY__
+
struct ddr_regs {
u32 tim1;
u32 tim2;
@@ -205,3 +207,5 @@ unsigned int omap4_revision(void);
noinline int omap4_scale_vcores(unsigned vsel0_pin);
#endif
+
+#endif
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 04/19] ARM omap4: Add missing double include protection
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (2 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 03/19] ARM omap4: Add missing assembly protection in header file Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 05/19] ARM omap: Make gpmc base runtime configurable Jan Luebbe
` (14 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
missing in omap4-clock.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/omap4-clock.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap/include/mach/omap4-clock.h b/arch/arm/mach-omap/include/mach/omap4-clock.h
index e5302d6..469c716 100644
--- a/arch/arm/mach-omap/include/mach/omap4-clock.h
+++ b/arch/arm/mach-omap/include/mach/omap4-clock.h
@@ -1,4 +1,7 @@
- /* PRCM */
+#ifndef __MACH_OMAP4_CLOCK_H
+#define __MACH_OMAP4_CLOCK_H
+
+/* PRCM */
#define CM_SYS_CLKSEL 0x4a306110
#define CM_SYS_CLKSEL_19M2 0x4
@@ -337,3 +340,4 @@ void omap4_enable_gpio_clocks(void);
void omap4_enable_all_clocks(void);
void omap4_do_scale_tps62361(u32 reg, u32 volt_mv);
+#endif /* __MACH_OMAP4_CLOCK_H */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 05/19] ARM omap: Make gpmc base runtime configurable
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (3 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 04/19] ARM omap4: Add missing double include protection Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 06/19] ARM omap: Make timer " Jan Luebbe
` (13 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/devices-gpmc-nand.c | 2 +-
arch/arm/mach-omap/gpmc.c | 14 ++++++++++++--
arch/arm/mach-omap/include/mach/gpmc.h | 4 +++-
3 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
index 42cb1b4..b2a2b0f 100644
--- a/arch/arm/mach-omap/devices-gpmc-nand.c
+++ b/arch/arm/mach-omap/devices-gpmc-nand.c
@@ -46,7 +46,7 @@ int omap_add_gpmc_nand_device(struct gpmc_nand_platform_data *pdata)
/* Configure GPMC CS before register */
gpmc_cs_config(pdata->cs, pdata->nand_cfg);
- add_generic_device("gpmc_nand", DEVICE_ID_DYNAMIC, NULL, OMAP_GPMC_BASE,
+ add_generic_device("gpmc_nand", DEVICE_ID_DYNAMIC, NULL, (resource_size_t)omap_gpmc_base,
1024 * 4, IORESOURCE_MEM, pdata);
return 0;
diff --git a/arch/arm/mach-omap/gpmc.c b/arch/arm/mach-omap/gpmc.c
index 4cfb7cf..d2b7024 100644
--- a/arch/arm/mach-omap/gpmc.c
+++ b/arch/arm/mach-omap/gpmc.c
@@ -29,6 +29,16 @@
#include <mach/sys_info.h>
#include <mach/syslib.h>
+void __iomem *omap_gpmc_base;
+
+static int gpmc_init(void)
+{
+ omap_gpmc_base = (void *)OMAP_GPMC_BASE;
+
+ return 0;
+}
+pure_initcall(gpmc_init);
+
/**
* @brief Do a Generic initialization of GPMC. if you choose otherwise,
* Use gpmc registers to modify the values. The defaults configured are:
@@ -43,7 +53,7 @@
void gpmc_generic_init(unsigned int cfg)
{
uint64_t start;
- unsigned int reg = GPMC_REG(CONFIG7_0);
+ void __iomem *reg = GPMC_REG(CONFIG7_0);
char x = 0;
debug("gpmccfg=0x%x\n", cfg);
@@ -89,7 +99,7 @@ EXPORT_SYMBOL(gpmc_generic_init);
*/
void gpmc_cs_config(char cs, struct gpmc_config *config)
{
- unsigned int reg = GPMC_REG(CONFIG1_0) + (cs * GPMC_CONFIG_CS_SIZE);
+ void __iomem *reg = GPMC_REG(CONFIG1_0) + (cs * GPMC_CONFIG_CS_SIZE);
unsigned char x = 0;
debug("gpmccs=0x%x cfg=0x%p\n", cs, config);
diff --git a/arch/arm/mach-omap/include/mach/gpmc.h b/arch/arm/mach-omap/include/mach/gpmc.h
index 957ff55..d4eac79 100644
--- a/arch/arm/mach-omap/include/mach/gpmc.h
+++ b/arch/arm/mach-omap/include/mach/gpmc.h
@@ -32,8 +32,10 @@
#ifndef __ASM_ARCH_OMAP_GPMC_H
#define __ASM_ARCH_OMAP_GPMC_H
+extern void __iomem *omap_gpmc_base;
+
/** GPMC Reg Wrapper */
-#define GPMC_REG(REGNAME) (OMAP_GPMC_BASE + GPMC_##REGNAME)
+#define GPMC_REG(REGNAME) (omap_gpmc_base + GPMC_##REGNAME)
#define GPMC_SYS_CONFIG (0x10)
#define GPMC_SYS_STATUS (0x14)
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 06/19] ARM omap: Make timer base runtime configurable
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (4 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 05/19] ARM omap: Make gpmc base runtime configurable Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 07/19] ARM omap4: make PRM defines SoC specific Jan Luebbe
` (12 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/timers.h | 4 ----
arch/arm/mach-omap/omap3_clock.c | 3 +++
arch/arm/mach-omap/omap4_clock.c | 1 +
arch/arm/mach-omap/omap4_generic.c | 2 +-
arch/arm/mach-omap/s32k_clksource.c | 10 +++++++++-
5 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/timers.h b/arch/arm/mach-omap/include/mach/timers.h
index 2df507d..8e4cb92 100644
--- a/arch/arm/mach-omap/include/mach/timers.h
+++ b/arch/arm/mach-omap/include/mach/timers.h
@@ -47,8 +47,4 @@
/* Enable sys_clk NO-prescale /1 */
#define GPT_EN ((0 << 2) | (0x1 << 1) | (0x1 << 0))
-/** Sync 32Khz Timer registers */
-#define S32K_CR (OMAP_32KTIMER_BASE + 0x10)
-#define S32K_FREQUENCY 32768
-
#endif /*__ASM_ARCH_GPT_H */
diff --git a/arch/arm/mach-omap/omap3_clock.c b/arch/arm/mach-omap/omap3_clock.c
index 975bf45..2a5e6f2 100644
--- a/arch/arm/mach-omap/omap3_clock.c
+++ b/arch/arm/mach-omap/omap3_clock.c
@@ -34,10 +34,13 @@
#include <io.h>
#include <mach/silicon.h>
#include <mach/clocks.h>
+#include <mach/omap3-clock.h>
#include <mach/timers.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
+#define S32K_CR (OMAP_32KTIMER_BASE + 0x10)
+
/* Following functions are exported from omap3_clock_core.S */
/* Helper functions */
static u32 get_osc_clk_speed(void);
diff --git a/arch/arm/mach-omap/omap4_clock.c b/arch/arm/mach-omap/omap4_clock.c
index b489d59..c86e4e5 100644
--- a/arch/arm/mach-omap/omap4_clock.c
+++ b/arch/arm/mach-omap/omap4_clock.c
@@ -3,6 +3,7 @@
#include <mach/syslib.h>
#include <mach/silicon.h>
#include <mach/clocks.h>
+#include <mach/omap4-clock.h>
#define LDELAY 12000000
diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c
index dc1dbae..4653b17 100644
--- a/arch/arm/mach-omap/omap4_generic.c
+++ b/arch/arm/mach-omap/omap4_generic.c
@@ -1,7 +1,7 @@
#include <common.h>
#include <init.h>
#include <io.h>
-#include <mach/clocks.h>
+#include <mach/omap4-clock.h>
#include <mach/silicon.h>
#include <mach/omap4-mux.h>
#include <mach/syslib.h>
diff --git a/arch/arm/mach-omap/s32k_clksource.c b/arch/arm/mach-omap/s32k_clksource.c
index 2cfcfa9..ca73753 100644
--- a/arch/arm/mach-omap/s32k_clksource.c
+++ b/arch/arm/mach-omap/s32k_clksource.c
@@ -31,6 +31,12 @@
#include <mach/sys_info.h>
#include <mach/syslib.h>
+/** Sync 32Khz Timer registers */
+#define S32K_CR 0x10
+#define S32K_FREQUENCY 32768
+
+static void __iomem *timerbase;
+
/**
* @brief Provide a simple clock read
*
@@ -41,7 +47,7 @@
*/
static uint64_t s32k_clocksource_read(void)
{
- return readl(S32K_CR);
+ return readl(timerbase + S32K_CR);
}
/* A bit obvious isn't it? */
@@ -62,6 +68,8 @@ static struct clocksource s32k_cs = {
*/
static int s32k_clocksource_init(void)
{
+ timerbase = (void *)OMAP_32KTIMER_BASE;
+
s32k_cs.mult = clocksource_hz2mult(S32K_FREQUENCY, s32k_cs.shift);
return init_clock(&s32k_cs);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 07/19] ARM omap4: make PRM defines SoC specific
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (5 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 06/19] ARM omap: Make timer " Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 08/19] ARM omap3: " Jan Luebbe
` (11 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/omap4-silicon.h | 8 ++++----
arch/arm/mach-omap/omap4_generic.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
index 127257d..0f0d88d 100644
--- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
@@ -147,11 +147,11 @@
*/
/* PRM */
-#define PRM_BASE 0x4A306000
-#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00)
+#define OMAP44XX_PRM_BASE 0x4A306000
+#define OMAP44XX_PRM_DEVICE_BASE (OMAP44XX_PRM_BASE + 0x1B00)
-#define PRM_RSTCTRL PRM_DEVICE_BASE
-#define PRM_RSTCTRL_RESET 0x01
+#define OMAP44XX_PRM_RSTCTRL OMAP44XX_PRM_DEVICE_BASE
+#define OMAP44XX_PRM_RSTCTRL_RESET 0x01
/*
* Non-secure SRAM Addresses
diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c
index 4653b17..f4841a6 100644
--- a/arch/arm/mach-omap/omap4_generic.c
+++ b/arch/arm/mach-omap/omap4_generic.c
@@ -36,7 +36,7 @@
void __noreturn reset_cpu(unsigned long addr)
{
- writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL);
+ writel(OMAP44XX_PRM_RSTCTRL_RESET, OMAP44XX_PRM_RSTCTRL);
while (1);
}
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 08/19] ARM omap3: make PRM defines SoC specific
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (6 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 07/19] ARM omap4: make PRM defines SoC specific Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 09/19] ARM omap: Use SoC specific defines for gpmc and timer base Jan Luebbe
` (10 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/omap3-silicon.h | 3 +--
arch/arm/mach-omap/omap3_generic.c | 2 +-
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/omap3-silicon.h b/arch/arm/mach-omap/include/mach/omap3-silicon.h
index a655729..1921923 100644
--- a/arch/arm/mach-omap/include/mach/omap3-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap3-silicon.h
@@ -128,7 +128,6 @@
#define OMAP_SDRC_CS1 0xA0000000
/* PRM */
-#define PRM_RSTCTRL_RESET 0x04
+#define OMAP3_PRM_RSTCTRL_RESET 0x04
#endif /* __ASM_ARCH_OMAP3_H */
-
diff --git a/arch/arm/mach-omap/omap3_generic.c b/arch/arm/mach-omap/omap3_generic.c
index cbac06f..9932103 100644
--- a/arch/arm/mach-omap/omap3_generic.c
+++ b/arch/arm/mach-omap/omap3_generic.c
@@ -52,7 +52,7 @@
*/
void __noreturn reset_cpu(unsigned long addr)
{
- writel(PRM_RSTCTRL_RESET, PRM_REG(RSTCTRL));
+ writel(OMAP3_PRM_RSTCTRL_RESET, PRM_REG(RSTCTRL));
while (1);
}
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 09/19] ARM omap: Use SoC specific defines for gpmc and timer base
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (7 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 08/19] ARM omap3: " Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 10/19] ARM omap: include individual SoC files Jan Luebbe
` (9 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/gpmc.c | 11 +++++++++--
arch/arm/mach-omap/include/mach/omap3-silicon.h | 4 ++--
arch/arm/mach-omap/include/mach/omap4-silicon.h | 4 ++--
arch/arm/mach-omap/omap3_clock.c | 2 +-
arch/arm/mach-omap/s32k_clksource.c | 10 ++++++++--
5 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap/gpmc.c b/arch/arm/mach-omap/gpmc.c
index d2b7024..4f54a10 100644
--- a/arch/arm/mach-omap/gpmc.c
+++ b/arch/arm/mach-omap/gpmc.c
@@ -24,7 +24,8 @@
#include <init.h>
#include <io.h>
#include <errno.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
+#include <mach/omap4-silicon.h>
#include <mach/gpmc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
@@ -33,7 +34,13 @@ void __iomem *omap_gpmc_base;
static int gpmc_init(void)
{
- omap_gpmc_base = (void *)OMAP_GPMC_BASE;
+#if defined(CONFIG_ARCH_OMAP3)
+ omap_gpmc_base = (void *)OMAP3_GPMC_BASE;
+#elif defined(CONFIG_ARCH_OMAP4)
+ omap_gpmc_base = (void *)OMAP44XX_GPMC_BASE;
+#else
+#error "Unknown ARCH"
+#endif
return 0;
}
diff --git a/arch/arm/mach-omap/include/mach/omap3-silicon.h b/arch/arm/mach-omap/include/mach/omap3-silicon.h
index 1921923..5843027 100644
--- a/arch/arm/mach-omap/include/mach/omap3-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap3-silicon.h
@@ -44,7 +44,7 @@
#define OMAP_SMX_APE_BASE 0x68000000
#define OMAP_SMS_BASE 0x6C000000
#define OMAP_SDRC_BASE 0x6D000000
-#define OMAP_GPMC_BASE 0x6E000000
+#define OMAP3_GPMC_BASE 0x6E000000
/** Peripheral Base Addresses */
#define OMAP_CTRL_BASE (OMAP_L4_CORE_BASE + 0x02000)
@@ -74,7 +74,7 @@
#define OMAP_WDTIMER2_BASE (OMAP_L4_WKUP_BASE + 0x14000)
#define OMAP_WDTIMER3_BASE (OMAP_L4_PER_BASE + 0x30000)
-#define OMAP_32KTIMER_BASE (OMAP_L4_WKUP_BASE + 0x20000)
+#define OMAP3_32KTIMER_BASE (OMAP_L4_WKUP_BASE + 0x20000)
#define OMAP_MMC1_BASE (OMAP_L4_CORE_BASE + 0x9C000)
#define OMAP_MMC2_BASE (OMAP_L4_CORE_BASE + 0xB4000)
diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
index 0f0d88d..5755856 100644
--- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
@@ -92,7 +92,7 @@
#define OMAP44XX_SCRM_AUXCLK3 (OMAP44XX_SCRM_BASE + 0x31c)
/* 32KTIMER */
-#define OMAP_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
+#define OMAP44XX_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
/* MMC */
#define OMAP44XX_MMC1_BASE (OMAP44XX_L4_PER_BASE + 0x09C100)
@@ -117,7 +117,7 @@
#define OMAP44XX_GPIO6_BASE (OMAP44XX_L4_PER_BASE + 0x5D100)
/* GPMC */
-#define OMAP_GPMC_BASE 0x50000000
+#define OMAP44XX_GPMC_BASE 0x50000000
/* DMM */
#define OMAP44XX_DMM_BASE 0x4E000000
diff --git a/arch/arm/mach-omap/omap3_clock.c b/arch/arm/mach-omap/omap3_clock.c
index 2a5e6f2..11f5117 100644
--- a/arch/arm/mach-omap/omap3_clock.c
+++ b/arch/arm/mach-omap/omap3_clock.c
@@ -39,7 +39,7 @@
#include <mach/sys_info.h>
#include <mach/syslib.h>
-#define S32K_CR (OMAP_32KTIMER_BASE + 0x10)
+#define S32K_CR (OMAP3_32KTIMER_BASE + 0x10)
/* Following functions are exported from omap3_clock_core.S */
/* Helper functions */
diff --git a/arch/arm/mach-omap/s32k_clksource.c b/arch/arm/mach-omap/s32k_clksource.c
index ca73753..7def8b1 100644
--- a/arch/arm/mach-omap/s32k_clksource.c
+++ b/arch/arm/mach-omap/s32k_clksource.c
@@ -25,7 +25,8 @@
#include <clock.h>
#include <init.h>
#include <io.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
+#include <mach/omap4-silicon.h>
#include <mach/clocks.h>
#include <mach/timers.h>
#include <mach/sys_info.h>
@@ -68,7 +69,12 @@ static struct clocksource s32k_cs = {
*/
static int s32k_clocksource_init(void)
{
- timerbase = (void *)OMAP_32KTIMER_BASE;
+ if (IS_ENABLED(CONFIG_ARCH_OMAP3))
+ timerbase = (void *)OMAP3_32KTIMER_BASE;
+ else if (IS_ENABLED(CONFIG_ARCH_OMAP4))
+ timerbase = (void *)OMAP44XX_32KTIMER_BASE;
+ else
+ BUG();
s32k_cs.mult = clocksource_hz2mult(S32K_FREQUENCY, s32k_cs.shift);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 10/19] ARM omap: include individual SoC files
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (8 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 09/19] ARM omap: Use SoC specific defines for gpmc and timer base Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 11/19] ARM omap: Add device register convenience functions Jan Luebbe
` (8 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
- remove mach/silicon.h and include omap?-silicon.h directly
- include mach/omap?-clock.h directly where needed
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/archosg9/board.c | 2 +-
arch/arm/boards/beagle/board.c | 2 +-
arch/arm/boards/omap343xdsp/board.c | 2 +-
arch/arm/boards/omap3evm/board.c | 2 +-
arch/arm/boards/panda/board.c | 2 +-
arch/arm/boards/pcm049/board.c | 2 +-
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 2 +-
arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 2 +-
arch/arm/mach-omap/devices-gpmc-nand.c | 1 -
arch/arm/mach-omap/include/mach/clocks.h | 7 -----
arch/arm/mach-omap/include/mach/omap3-silicon.h | 5 ++++
arch/arm/mach-omap/include/mach/silicon.h | 33 -----------------------
arch/arm/mach-omap/omap3_clock.c | 2 +-
arch/arm/mach-omap/omap3_core.S | 2 +-
arch/arm/mach-omap/omap3_generic.c | 3 ++-
arch/arm/mach-omap/omap4_clock.c | 2 +-
arch/arm/mach-omap/omap4_generic.c | 2 +-
drivers/mtd/nand/nand_omap_gpmc.c | 1 -
18 files changed, 19 insertions(+), 55 deletions(-)
delete mode 100644 arch/arm/mach-omap/include/mach/silicon.h
diff --git a/arch/arm/boards/archosg9/board.c b/arch/arm/boards/archosg9/board.c
index 7076c6f..dab0a36 100644
--- a/arch/arm/boards/archosg9/board.c
+++ b/arch/arm/boards/archosg9/board.c
@@ -15,7 +15,7 @@
#include <ns16550.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
-#include <mach/silicon.h>
+#include <mach/omap4-silicon.h>
#include <sizes.h>
#include <i2c/i2c.h>
#include <gpio.h>
diff --git a/arch/arm/boards/beagle/board.c b/arch/arm/boards/beagle/board.c
index de8206b..f6d9d3f 100644
--- a/arch/arm/boards/beagle/board.c
+++ b/arch/arm/boards/beagle/board.c
@@ -55,7 +55,7 @@
#include <ns16550.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/boards/omap343xdsp/board.c b/arch/arm/boards/omap343xdsp/board.c
index 8b8e0b2..fc50eb1 100644
--- a/arch/arm/boards/omap343xdsp/board.c
+++ b/arch/arm/boards/omap343xdsp/board.c
@@ -48,7 +48,7 @@
#include <io.h>
#include <ns16550.h>
#include <asm/armlinux.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/boards/omap3evm/board.c b/arch/arm/boards/omap3evm/board.c
index d18cf39..a5faf56 100644
--- a/arch/arm/boards/omap3evm/board.c
+++ b/arch/arm/boards/omap3evm/board.c
@@ -46,7 +46,7 @@
#include <sizes.h>
#include <ns16550.h>
#include <asm/armlinux.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 98c05b2..99222d2 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -8,7 +8,7 @@
#include <asm/armlinux.h>
#include <linux/stat.h>
#include <generated/mach-types.h>
-#include <mach/silicon.h>
+#include <mach/omap4-silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index 3159457..859ce3b 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -22,7 +22,7 @@
#include <ns16550.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
-#include <mach/silicon.h>
+#include <mach/omap4-silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/boards/phycard-a-l1/pca-a-l1.c b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
index e35db18..c6a7e60 100644
--- a/arch/arm/boards/phycard-a-l1/pca-a-l1.c
+++ b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
@@ -58,7 +58,7 @@
#include <mach/xload.h>
#include <mach/omap3-mux.h>
#include <mach/sdrc.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c b/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
index 64e6d94..26b31dd 100644
--- a/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
+++ b/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
@@ -22,7 +22,7 @@
#include <ns16550.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
-#include <mach/silicon.h>
+#include <mach/omap4-silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c
index b2a2b0f..c4ddc95 100644
--- a/arch/arm/mach-omap/devices-gpmc-nand.c
+++ b/arch/arm/mach-omap/devices-gpmc-nand.c
@@ -24,7 +24,6 @@
#include <clock.h>
#include <io.h>
-#include <mach/silicon.h>
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
diff --git a/arch/arm/mach-omap/include/mach/clocks.h b/arch/arm/mach-omap/include/mach/clocks.h
index cbadec7..e44d98b 100644
--- a/arch/arm/mach-omap/include/mach/clocks.h
+++ b/arch/arm/mach-omap/include/mach/clocks.h
@@ -34,11 +34,4 @@
#define S26M 26000000
#define S38_4M 38400000
-#ifdef CONFIG_ARCH_OMAP3
-#include <mach/omap3-clock.h>
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-#include <mach/omap4-clock.h>
-#endif
-
#endif /* __OMAP_CLOCKS_H_ */
diff --git a/arch/arm/mach-omap/include/mach/omap3-silicon.h b/arch/arm/mach-omap/include/mach/omap3-silicon.h
index 5843027..0cf43bd 100644
--- a/arch/arm/mach-omap/include/mach/omap3-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap3-silicon.h
@@ -130,4 +130,9 @@
/* PRM */
#define OMAP3_PRM_RSTCTRL_RESET 0x04
+/* If Architecture specific init functions are present */
+#ifndef __ASSEMBLY__
+void omap3_core_init(void);
+#endif /* __ASSEMBLY__ */
+
#endif /* __ASM_ARCH_OMAP3_H */
diff --git a/arch/arm/mach-omap/include/mach/silicon.h b/arch/arm/mach-omap/include/mach/silicon.h
deleted file mode 100644
index 5ee1931..0000000
--- a/arch/arm/mach-omap/include/mach/silicon.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2008
- * Texas Instruments, <www.ti.com>
- * Nishanth Menon <x0nishan@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARCH_OMAP_SILICON_H
-#define __ASM_ARCH_OMAP_SILICON_H
-
-/* Each platform silicon header comes here */
-#ifdef CONFIG_ARCH_OMAP3
-#include <mach/omap3-silicon.h>
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-#include <mach/omap4-silicon.h>
-#endif
-
-/* If Architecture specific init functions are present */
-#ifndef __ASSEMBLY__
-void omap3_core_init(void);
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_OMAP_SILICON_H */
diff --git a/arch/arm/mach-omap/omap3_clock.c b/arch/arm/mach-omap/omap3_clock.c
index 11f5117..5cf2747 100644
--- a/arch/arm/mach-omap/omap3_clock.c
+++ b/arch/arm/mach-omap/omap3_clock.c
@@ -32,7 +32,7 @@
#include <common.h>
#include <io.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
#include <mach/clocks.h>
#include <mach/omap3-clock.h>
#include <mach/timers.h>
diff --git a/arch/arm/mach-omap/omap3_core.S b/arch/arm/mach-omap/omap3_core.S
index 38a8cb4..bc32f55 100644
--- a/arch/arm/mach-omap/omap3_core.S
+++ b/arch/arm/mach-omap/omap3_core.S
@@ -28,7 +28,7 @@
#include <config.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
#include <mach/wdt.h>
#include <mach/clocks.h>
#include <asm/barebox-arm-head.h>
diff --git a/arch/arm/mach-omap/omap3_generic.c b/arch/arm/mach-omap/omap3_generic.c
index 9932103..a209129 100644
--- a/arch/arm/mach-omap/omap3_generic.c
+++ b/arch/arm/mach-omap/omap3_generic.c
@@ -30,12 +30,13 @@
#include <common.h>
#include <init.h>
#include <io.h>
-#include <mach/silicon.h>
+#include <mach/omap3-silicon.h>
#include <mach/gpmc.h>
#include <mach/sdrc.h>
#include <mach/control.h>
#include <mach/omap3-smx.h>
#include <mach/clocks.h>
+#include <mach/omap3-clock.h>
#include <mach/wdt.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
diff --git a/arch/arm/mach-omap/omap4_clock.c b/arch/arm/mach-omap/omap4_clock.c
index c86e4e5..0621fd3 100644
--- a/arch/arm/mach-omap/omap4_clock.c
+++ b/arch/arm/mach-omap/omap4_clock.c
@@ -1,7 +1,7 @@
#include <common.h>
#include <io.h>
#include <mach/syslib.h>
-#include <mach/silicon.h>
+#include <mach/omap4-silicon.h>
#include <mach/clocks.h>
#include <mach/omap4-clock.h>
diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c
index f4841a6..2a09eb6 100644
--- a/arch/arm/mach-omap/omap4_generic.c
+++ b/arch/arm/mach-omap/omap4_generic.c
@@ -2,7 +2,7 @@
#include <init.h>
#include <io.h>
#include <mach/omap4-clock.h>
-#include <mach/silicon.h>
+#include <mach/omap4-silicon.h>
#include <mach/omap4-mux.h>
#include <mach/syslib.h>
#include <mach/xload.h>
diff --git a/drivers/mtd/nand/nand_omap_gpmc.c b/drivers/mtd/nand/nand_omap_gpmc.c
index 4df5a1e..9050a8d 100644
--- a/drivers/mtd/nand/nand_omap_gpmc.c
+++ b/drivers/mtd/nand/nand_omap_gpmc.c
@@ -68,7 +68,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <io.h>
-#include <mach/silicon.h>
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 11/19] ARM omap: Add device register convenience functions
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (9 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 10/19] ARM omap: include individual SoC files Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 12/19] ARM omap3: Use device register functions in boards Jan Luebbe
` (7 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/Makefile | 2 +-
arch/arm/mach-omap/include/mach/devices.h | 13 +++++
arch/arm/mach-omap/include/mach/omap3-devices.h | 54 ++++++++++++++++-
arch/arm/mach-omap/include/mach/omap4-devices.h | 71 +++++++++++++++++++++++
arch/arm/mach-omap/omap_devices.c | 27 +++++++++
5 files changed, 165 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-omap/include/mach/devices.h
create mode 100644 arch/arm/mach-omap/include/mach/omap4-devices.h
create mode 100644 arch/arm/mach-omap/omap_devices.c
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
index 2ac7fb2..b7a5e4a 100644
--- a/arch/arm/mach-omap/Makefile
+++ b/arch/arm/mach-omap/Makefile
@@ -15,7 +15,7 @@
# GNU General Public License for more details.
#
#
-obj-$(CONFIG_ARCH_OMAP) += syslib.o
+obj-$(CONFIG_ARCH_OMAP) += syslib.o omap_devices.o
pbl-$(CONFIG_ARCH_OMAP) += syslib.o
obj-$(CONFIG_OMAP_CLOCK_SOURCE_S32K) += s32k_clksource.o
obj-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o auxcr.o
diff --git a/arch/arm/mach-omap/include/mach/devices.h b/arch/arm/mach-omap/include/mach/devices.h
new file mode 100644
index 0000000..9881604
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/devices.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_OMAP_DEVICES_H
+#define __MACH_OMAP_DEVICES_H
+
+#include <mach/omap_hsmmc.h>
+
+struct device_d *omap_add_uart(int id, unsigned long base);
+
+struct device_d *omap_add_mmc(int id, unsigned long base,
+ struct omap_hsmmc_platform_data *pdata);
+
+struct device_d *omap_add_i2c(int id, unsigned long base, void *pdata);
+
+#endif /* __MACH_OMAP_DEVICES_H */
diff --git a/arch/arm/mach-omap/include/mach/omap3-devices.h b/arch/arm/mach-omap/include/mach/omap3-devices.h
index 8a6b324..dd6826a 100644
--- a/arch/arm/mach-omap/include/mach/omap3-devices.h
+++ b/arch/arm/mach-omap/include/mach/omap3-devices.h
@@ -1,7 +1,12 @@
+#ifndef __MACH_OMAP3_DEVICES_H
+#define __MACH_OMAP3_DEVICES_H
+
#include <driver.h>
#include <sizes.h>
-
+#include <mach/omap3-silicon.h>
+#include <mach/devices.h>
#include <mach/mcspi.h>
+#include <mach/omap_hsmmc.h>
/* the device numbering is the same as in the device tree */
@@ -30,3 +35,50 @@ static inline struct device_d *omap3_add_spi4(void)
{
return omap3_add_spi(4, OMAP3_MCSPI4_BASE);
}
+
+static inline struct device_d *omap3_add_uart1(void)
+{
+ return omap_add_uart(0, OMAP_UART1_BASE);
+}
+
+static inline struct device_d *omap3_add_uart2(void)
+{
+ return omap_add_uart(1, OMAP_UART2_BASE);
+}
+
+static inline struct device_d *omap3_add_uart3(void)
+{
+ return omap_add_uart(2, OMAP_UART3_BASE);
+}
+
+static inline struct device_d *omap3_add_mmc1(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(0, OMAP_MMC1_BASE + 0x100, pdata);
+}
+
+static inline struct device_d *omap3_add_mmc2(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(1, OMAP_MMC2_BASE + 0x100, pdata);
+}
+
+static inline struct device_d *omap3_add_mmc3(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(2, OMAP_MMC3_BASE + 0x100, pdata);
+}
+
+static inline struct device_d *omap3_add_i2c1(void *pdata)
+{
+ return omap_add_i2c(0, OMAP_I2C1_BASE, pdata);
+}
+
+static inline struct device_d *omap3_add_i2c2(void *pdata)
+{
+ return omap_add_i2c(1, OMAP_I2C2_BASE, pdata);
+}
+
+static inline struct device_d *omap3_add_i2c3(void *pdata)
+{
+ return omap_add_i2c(2, OMAP_I2C3_BASE, pdata);
+}
+
+#endif /* __MACH_OMAP3_DEVICES_H */
diff --git a/arch/arm/mach-omap/include/mach/omap4-devices.h b/arch/arm/mach-omap/include/mach/omap4-devices.h
new file mode 100644
index 0000000..448de68
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/omap4-devices.h
@@ -0,0 +1,71 @@
+#ifndef __MACH_OMAP4_DEVICES_H
+#define __MACH_OMAP4_DEVICES_H
+
+#include <driver.h>
+#include <sizes.h>
+#include <mach/devices.h>
+#include <mach/omap4-silicon.h>
+#include <mach/mcspi.h>
+#include <mach/omap_hsmmc.h>
+
+static inline struct device_d *omap44xx_add_uart1(void)
+{
+ return omap_add_uart(0, OMAP44XX_UART1_BASE);
+}
+
+static inline struct device_d *omap44xx_add_uart2(void)
+{
+ return omap_add_uart(1, OMAP44XX_UART2_BASE);
+}
+
+static inline struct device_d *omap44xx_add_uart3(void)
+{
+ return omap_add_uart(2, OMAP44XX_UART3_BASE);
+}
+
+static inline struct device_d *omap44xx_add_mmc1(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(0, OMAP44XX_MMC1_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_mmc2(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(1, OMAP44XX_MMC2_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_mmc3(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(2, OMAP44XX_MMC3_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_mmc4(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(3, OMAP44XX_MMC4_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_mmc5(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(4, OMAP44XX_MMC5_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_i2c1(void *pdata)
+{
+ return omap_add_i2c(0, OMAP44XX_I2C1_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_i2c2(void *pdata)
+{
+ return omap_add_i2c(1, OMAP44XX_I2C2_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_i2c3(void *pdata)
+{
+ return omap_add_i2c(2, OMAP44XX_I2C3_BASE, pdata);
+}
+
+static inline struct device_d *omap44xx_add_i2c4(void *pdata)
+{
+ return omap_add_i2c(3, OMAP44XX_I2C4_BASE, pdata);
+}
+
+#endif /* __MACH_OMAP4_DEVICES_H */
diff --git a/arch/arm/mach-omap/omap_devices.c b/arch/arm/mach-omap/omap_devices.c
new file mode 100644
index 0000000..acf029d
--- /dev/null
+++ b/arch/arm/mach-omap/omap_devices.c
@@ -0,0 +1,27 @@
+#include <driver.h>
+#include <ns16550.h>
+#include <mach/omap3-devices.h>
+
+static struct NS16550_plat serial_plat = {
+ .clock = 48000000, /* 48MHz (APLL96/2) */
+ .shift = 2,
+};
+
+struct device_d *omap_add_uart(int id, unsigned long base)
+{
+ return add_ns16550_device(id, base, 1024,
+ IORESOURCE_MEM_8BIT, &serial_plat);
+}
+
+struct device_d *omap_add_mmc(int id, unsigned long base,
+ struct omap_hsmmc_platform_data *pdata)
+{
+ return add_generic_device("omap-hsmmc", id, NULL,
+ base, SZ_4K, IORESOURCE_MEM, pdata);
+}
+
+struct device_d *omap_add_i2c(int id, unsigned long base, void *pdata)
+{
+ return add_generic_device("i2c-omap", id, NULL, base, SZ_4K,
+ IORESOURCE_MEM, pdata);
+}
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 12/19] ARM omap3: Use device register functions in boards
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (10 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 11/19] ARM omap: Add device register convenience functions Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 13/19] ARM omap4: " Jan Luebbe
` (6 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beagle/board.c | 16 ++++------------
arch/arm/boards/omap343xdsp/board.c | 11 ++---------
arch/arm/boards/omap3evm/board.c | 23 +++++++----------------
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 15 +++------------
4 files changed, 16 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boards/beagle/board.c b/arch/arm/boards/beagle/board.c
index f6d9d3f..6004566 100644
--- a/arch/arm/boards/beagle/board.c
+++ b/arch/arm/boards/beagle/board.c
@@ -64,6 +64,7 @@
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
#include <mach/ehci.h>
+#include <mach/omap3-devices.h>
#include <i2c/i2c.h>
#include <linux/err.h>
#include <usb/ehci.h>
@@ -234,11 +235,6 @@ pure_initcall(beagle_board_init);
#ifdef CONFIG_DRIVER_SERIAL_NS16550
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
/**
* @brief UART serial port initialization - remember to enable COM clocks in
* arch
@@ -247,9 +243,7 @@ static struct NS16550_plat serial_plat = {
*/
static int beagle_console_init(void)
{
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT,
- &serial_plat);
+ omap3_add_uart3();
return 0;
}
@@ -295,8 +289,7 @@ mem_initcall(beagle_mem_init);
static int beagle_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC, NULL, OMAP_I2C1_BASE, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap3_add_i2c1(NULL);
#ifdef CONFIG_USB_EHCI_OMAP
if (ehci_omap_init(&omap_ehci_pdata) >= 0)
@@ -309,8 +302,7 @@ static int beagle_devices_init(void)
#endif
omap_add_gpmc_nand_device(&nand_plat);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap3_add_mmc1(NULL);
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);
diff --git a/arch/arm/boards/omap343xdsp/board.c b/arch/arm/boards/omap343xdsp/board.c
index fc50eb1..6de86f4 100644
--- a/arch/arm/boards/omap343xdsp/board.c
+++ b/arch/arm/boards/omap343xdsp/board.c
@@ -49,6 +49,7 @@
#include <ns16550.h>
#include <asm/armlinux.h>
#include <mach/omap3-silicon.h>
+#include <mach/omap3-devices.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
@@ -602,12 +603,6 @@ static void mux_config(void)
/*-----------------------CONSOLE Devices -----------------------------------*/
#ifdef CONFIG_DRIVER_SERIAL_NS16550
-
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
/**
* @brief UART serial port initialization - remember to enable COM clocks in arch
*
@@ -615,9 +610,7 @@ static struct NS16550_plat serial_plat = {
*/
static int sdp3430_console_init(void)
{
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT,
- &serial_plat);
+ omap3_add_uart3();
return 0;
}
diff --git a/arch/arm/boards/omap3evm/board.c b/arch/arm/boards/omap3evm/board.c
index a5faf56..179450f 100644
--- a/arch/arm/boards/omap3evm/board.c
+++ b/arch/arm/boards/omap3evm/board.c
@@ -55,6 +55,7 @@
#include <mach/gpmc.h>
#include <errno.h>
#include <generated/mach-types.h>
+#include <mach/omap3-devices.h>
/*
@@ -212,11 +213,6 @@ pure_initcall(omap3_evm_board_init);
#ifdef CONFIG_DRIVER_SERIAL_NS16550
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
/**
* @brief Initialize the serial port to be used as console.
*
@@ -224,13 +220,10 @@ static struct NS16550_plat serial_plat = {
*/
static int omap3evm_init_console(void)
{
- add_ns16550_device(DEVICE_ID_DYNAMIC,
-#if defined(CONFIG_OMAP3EVM_UART1)
- OMAP_UART1_BASE,
-#elif defined(CONFIG_OMAP3EVM_UART3)
- OMAP_UART3_BASE,
-#endif
- 1024, IORESOURCE_MEM_8BIT, &serial_plat);
+ if (IS_ENABLED(CONFIG_OMAP3EVM_UART1))
+ omap3_add_uart1();
+ if (IS_ENABLED(CONFIG_OMAP3EVM_UART3))
+ omap3_add_uart3();
return 0;
}
@@ -253,10 +246,8 @@ static int omap3evm_init_devices(void)
*/
gpmc_generic_init(0x10);
#endif
-#ifdef CONFIG_MCI_OMAP_HSMMC
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
- IORESOURCE_MEM, NULL);
-#endif
+ omap3_add_mmc1(NULL);
+
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_OMAP3EVM);
diff --git a/arch/arm/boards/phycard-a-l1/pca-a-l1.c b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
index c6a7e60..3b89631 100644
--- a/arch/arm/boards/phycard-a-l1/pca-a-l1.c
+++ b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
@@ -61,6 +61,7 @@
#include <mach/omap3-silicon.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
+#include <mach/omap3-devices.h>
#define SMC911X_BASE 0x2c000000
@@ -307,10 +308,6 @@ pure_initcall(pcaal1_board_init);
/*
* Run-time initialization(s)
*/
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
/**
* @brief Initialize the serial port to be used as console.
@@ -319,8 +316,7 @@ static struct NS16550_plat serial_plat = {
*/
static int pcaal1_init_console(void)
{
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT,
- &serial_plat);
+ omap3_add_uart3();
return 0;
}
@@ -377,11 +373,9 @@ static int pcaal1_mem_init(void)
}
mem_initcall(pcaal1_mem_init);
-#ifdef CONFIG_MCI_OMAP_HSMMC
struct omap_hsmmc_platform_data pcaal1_hsmmc_plat = {
.f_max = 26000000,
};
-#endif
static struct gpmc_nand_platform_data nand_plat = {
.device_width = 16,
@@ -393,10 +387,7 @@ static int pcaal1_init_devices(void)
{
omap_add_gpmc_nand_device(&nand_plat);
-#ifdef CONFIG_MCI_OMAP_HSMMC
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
- IORESOURCE_MEM, &pcaal1_hsmmc_plat);
-#endif
+ omap3_add_mmc1(&pcaal1_hsmmc_plat);
#ifdef CONFIG_DRIVER_NET_SMC911X
pcaal1_setup_net_chip();
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 13/19] ARM omap4: Use device register functions in boards
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (11 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 12/19] ARM omap3: Use device register functions in boards Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 14/19] ARM omap hsmmc: Fix register offset Jan Luebbe
` (5 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/archosg9/board.c | 17 +++++------------
arch/arm/boards/panda/board.c | 18 ++++--------------
arch/arm/boards/pcm049/board.c | 17 ++++-------------
arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 16 ++++------------
4 files changed, 17 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boards/archosg9/board.c b/arch/arm/boards/archosg9/board.c
index dab0a36..5f62748 100644
--- a/arch/arm/boards/archosg9/board.c
+++ b/arch/arm/boards/archosg9/board.c
@@ -16,14 +16,11 @@
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <mach/omap4-silicon.h>
+#include <mach/omap4-devices.h>
#include <sizes.h>
#include <i2c/i2c.h>
#include <gpio.h>
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
static int archosg9_console_init(void){
if (IS_ENABLED(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT))
add_generic_device("serial_omap4_usbboot", DEVICE_ID_DYNAMIC
@@ -31,8 +28,7 @@ static int archosg9_console_init(void){
if (IS_ENABLED(CONFIG_DRIVER_SERIAL_NS16550)) {
gpio_direction_output(41, 0); /* gps_disable */
gpio_direction_output(34, 1); /* 1v8_pwron */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP44XX_UART1_BASE, 1024,
- IORESOURCE_MEM_8BIT, &serial_plat);
+ omap44xx_add_uart1();
}
return 0;
}
@@ -50,12 +46,9 @@ static struct i2c_board_info i2c_devices[] = {
static int archosg9_devices_init(void){
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap" , DEVICE_ID_DYNAMIC, NULL,
- OMAP44XX_I2C1_BASE, 0x100, IORESOURCE_MEM, NULL);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL,
- OMAP44XX_MMC1_BASE, SZ_4K, IORESOURCE_MEM, NULL);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL,
- OMAP44XX_MMC2_BASE, SZ_4K, IORESOURCE_MEM, NULL);
+ omap44xx_add_i2c1(NULL);
+ omap44xx_add_mmc1(NULL);
+ omap44xx_add_mmc2(NULL);
armlinux_set_bootparams((void *)0x80000100);
/*
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 99222d2..5b27f46 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -9,6 +9,7 @@
#include <linux/stat.h>
#include <generated/mach-types.h>
#include <mach/omap4-silicon.h>
+#include <mach/omap4-devices.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
@@ -33,16 +34,9 @@ static int board_revision;
#define GPIO_BOARD_ID1 101
#define GPIO_BOARD_ID2 171
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
static int panda_console_init(void)
{
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP44XX_UART3_BASE, 1024,
- IORESOURCE_MEM_8BIT, &serial_plat);
+ omap44xx_add_uart3();
return 0;
}
@@ -160,13 +154,9 @@ static int panda_devices_init(void)
}
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC,
- NULL, 0x48070000, 0x1000,
- IORESOURCE_MEM, NULL);
-
+ omap44xx_add_i2c1(NULL);
+ omap44xx_add_mmc1(NULL);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K,
- IORESOURCE_MEM, NULL);
panda_ehci_init();
panda_led_init();
diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index 859ce3b..ca3f906 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -23,6 +23,7 @@
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <mach/omap4-silicon.h>
+#include <mach/omap4-devices.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
@@ -38,16 +39,9 @@
#include <mach/xload.h>
#include <i2c/i2c.h>
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
static int pcm049_console_init(void)
{
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP44XX_UART3_BASE, 1024,
- IORESOURCE_MEM_8BIT, &serial_plat);
+ omap44xx_add_uart3();
return 0;
}
@@ -99,11 +93,8 @@ static struct gpmc_nand_platform_data nand_plat = {
static int pcm049_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC, NULL, 0x48070000, 0x1000,
- IORESOURCE_MEM, NULL);
-
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap44xx_add_i2c1(NULL);
+ omap44xx_add_mmc1(NULL);
gpmc_generic_init(0x10);
diff --git a/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c b/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
index 26b31dd..3931f57 100644
--- a/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
+++ b/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
@@ -37,18 +37,12 @@
#include <mach/gpmc_nand.h>
#include <mach/xload.h>
#include <mach/omap_hsmmc.h>
+#include <mach/omap4-devices.h>
#include <i2c/i2c.h>
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
static int pcaaxl2_console_init(void)
{
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP44XX_UART3_BASE, 1024,
- IORESOURCE_MEM_8BIT, &serial_plat);
+ omap44xx_add_uart3();
return 0;
}
@@ -111,16 +105,14 @@ static int pcaaxl2_devices_init(void)
u32 value;
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC, NULL, 0x48070000, 0x1000,
- IORESOURCE_MEM, NULL);
+ omap44xx_add_i2c1(NULL);
value = readl(OMAP4_CONTROL_PBIASLITE);
value &= ~OMAP4_MMC1_PBIASLITE_VMODE;
value |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ);
writel(value, OMAP4_CONTROL_PBIASLITE);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K,
- IORESOURCE_MEM, &mmc_device);
+ omap44xx_add_mmc1(&mmc_device);
gpmc_generic_init(0x10);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 14/19] ARM omap hsmmc: Fix register offset
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (12 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 13/19] ARM omap4: " Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 15/19] ARM omap3: Add change OMAP_ prefix to OMAP3_ for registers Jan Luebbe
` (4 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
The hsmmc module has a 0x100 offset in its register space. The real
register space size for the module is 4K, so when we register the
device with the size 4k, we have to account for the offset in the
driver, not in the resource allocation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/omap3-devices.h | 6 +++---
arch/arm/mach-omap/include/mach/omap4-silicon.h | 10 +++++-----
drivers/mci/omap_hsmmc.c | 4 +++-
3 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap/include/mach/omap3-devices.h b/arch/arm/mach-omap/include/mach/omap3-devices.h
index dd6826a..555e86f 100644
--- a/arch/arm/mach-omap/include/mach/omap3-devices.h
+++ b/arch/arm/mach-omap/include/mach/omap3-devices.h
@@ -53,17 +53,17 @@ static inline struct device_d *omap3_add_uart3(void)
static inline struct device_d *omap3_add_mmc1(struct omap_hsmmc_platform_data *pdata)
{
- return omap_add_mmc(0, OMAP_MMC1_BASE + 0x100, pdata);
+ return omap_add_mmc(0, OMAP_MMC1_BASE, pdata);
}
static inline struct device_d *omap3_add_mmc2(struct omap_hsmmc_platform_data *pdata)
{
- return omap_add_mmc(1, OMAP_MMC2_BASE + 0x100, pdata);
+ return omap_add_mmc(1, OMAP_MMC2_BASE, pdata);
}
static inline struct device_d *omap3_add_mmc3(struct omap_hsmmc_platform_data *pdata)
{
- return omap_add_mmc(2, OMAP_MMC3_BASE + 0x100, pdata);
+ return omap_add_mmc(2, OMAP_MMC3_BASE, pdata);
}
static inline struct device_d *omap3_add_i2c1(void *pdata)
diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
index 5755856..b5d1eb9 100644
--- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
@@ -95,11 +95,11 @@
#define OMAP44XX_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
/* MMC */
-#define OMAP44XX_MMC1_BASE (OMAP44XX_L4_PER_BASE + 0x09C100)
-#define OMAP44XX_MMC2_BASE (OMAP44XX_L4_PER_BASE + 0x0B4100)
-#define OMAP44XX_MMC3_BASE (OMAP44XX_L4_PER_BASE + 0x0AD100)
-#define OMAP44XX_MMC4_BASE (OMAP44XX_L4_PER_BASE + 0x0D1100)
-#define OMAP44XX_MMC5_BASE (OMAP44XX_L4_PER_BASE + 0x0D5100)
+#define OMAP44XX_MMC1_BASE (OMAP44XX_L4_PER_BASE + 0x09C000)
+#define OMAP44XX_MMC2_BASE (OMAP44XX_L4_PER_BASE + 0x0B4000)
+#define OMAP44XX_MMC3_BASE (OMAP44XX_L4_PER_BASE + 0x0AD000)
+#define OMAP44XX_MMC4_BASE (OMAP44XX_L4_PER_BASE + 0x0D1000)
+#define OMAP44XX_MMC5_BASE (OMAP44XX_L4_PER_BASE + 0x0D5000)
/* GPIO
*
diff --git a/drivers/mci/omap_hsmmc.c b/drivers/mci/omap_hsmmc.c
index d1e4c36..6471ea6 100644
--- a/drivers/mci/omap_hsmmc.c
+++ b/drivers/mci/omap_hsmmc.c
@@ -175,6 +175,7 @@ struct omap_hsmmc {
struct mci_host mci;
struct device_d *dev;
struct hsmmc *base;
+ void __iomem *iobase;
};
#define to_hsmmc(mci) container_of(mci, struct omap_hsmmc, mci)
@@ -575,7 +576,8 @@ static int omap_mmc_probe(struct device_d *dev)
hsmmc->mci.host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS;
hsmmc->mci.hw_dev = dev;
- hsmmc->base = dev_request_mem_region(dev, 0);
+ hsmmc->iobase = dev_request_mem_region(dev, 0);
+ hsmmc->base = hsmmc->iobase + 0x100;
hsmmc->mci.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 15/19] ARM omap3: Add change OMAP_ prefix to OMAP3_ for registers
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (13 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 14/19] ARM omap hsmmc: Fix register offset Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 16/19] ARM OMAP AM33XX: create new ARCH for AM33xx Jan Luebbe
` (3 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beagle/board.c | 32 +--
arch/arm/boards/omap343xdsp/board.c | 32 +--
arch/arm/boards/omap3evm/board.c | 28 +--
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 36 ++--
arch/arm/mach-omap/include/mach/control.h | 4 +-
arch/arm/mach-omap/include/mach/omap3-clock.h | 4 +-
arch/arm/mach-omap/include/mach/omap3-devices.h | 18 +-
arch/arm/mach-omap/include/mach/omap3-silicon.h | 132 ++++++------
arch/arm/mach-omap/include/mach/omap3-smx.h | 16 +-
arch/arm/mach-omap/include/mach/sdrc.h | 2 +-
arch/arm/mach-omap/include/mach/wdt.h | 2 +-
arch/arm/mach-omap/omap3_clock.c | 244 +++++++++++------------
arch/arm/mach-omap/omap3_generic.c | 38 ++--
drivers/usb/host/ehci-omap.c | 76 +++----
14 files changed, 332 insertions(+), 332 deletions(-)
diff --git a/arch/arm/boards/beagle/board.c b/arch/arm/boards/beagle/board.c
index 6004566..04c4d32 100644
--- a/arch/arm/boards/beagle/board.c
+++ b/arch/arm/boards/beagle/board.c
@@ -81,47 +81,47 @@ static void sdrc_init(void)
{
/* SDRAM software reset */
/* No idle ack and RESET enable */
- writel(0x1A, SDRC_REG(SYSCONFIG));
+ writel(0x1A, OMAP3_SDRC_REG(SYSCONFIG));
sdelay(100);
/* No idle ack and RESET disable */
- writel(0x18, SDRC_REG(SYSCONFIG));
+ writel(0x18, OMAP3_SDRC_REG(SYSCONFIG));
/* SDRC Sharing register */
/* 32-bit SDRAM on data lane [31:0] - CS0 */
/* pin tri-stated = 1 */
- writel(0x00000100, SDRC_REG(SHARING));
+ writel(0x00000100, OMAP3_SDRC_REG(SHARING));
/* ----- SDRC Registers Configuration --------- */
/* SDRC_MCFG0 register */
- writel(0x02584099, SDRC_REG(MCFG_0));
+ writel(0x02584099, OMAP3_SDRC_REG(MCFG_0));
/* SDRC_RFR_CTRL0 register */
- writel(0x54601, SDRC_REG(RFR_CTRL_0));
+ writel(0x54601, OMAP3_SDRC_REG(RFR_CTRL_0));
/* SDRC_ACTIM_CTRLA0 register */
- writel(0xA29DB4C6, SDRC_REG(ACTIM_CTRLA_0));
+ writel(0xA29DB4C6, OMAP3_SDRC_REG(ACTIM_CTRLA_0));
/* SDRC_ACTIM_CTRLB0 register */
- writel(0x12214, SDRC_REG(ACTIM_CTRLB_0));
+ writel(0x12214, OMAP3_SDRC_REG(ACTIM_CTRLB_0));
/* Disble Power Down of CKE due to 1 CKE on combo part */
- writel(0x00000081, SDRC_REG(POWER));
+ writel(0x00000081, OMAP3_SDRC_REG(POWER));
/* SDRC_MANUAL command register */
/* NOP command */
- writel(0x00000000, SDRC_REG(MANUAL_0));
+ writel(0x00000000, OMAP3_SDRC_REG(MANUAL_0));
/* Precharge command */
- writel(0x00000001, SDRC_REG(MANUAL_0));
+ writel(0x00000001, OMAP3_SDRC_REG(MANUAL_0));
/* Auto-refresh command */
- writel(0x00000002, SDRC_REG(MANUAL_0));
+ writel(0x00000002, OMAP3_SDRC_REG(MANUAL_0));
/* Auto-refresh command */
- writel(0x00000002, SDRC_REG(MANUAL_0));
+ writel(0x00000002, OMAP3_SDRC_REG(MANUAL_0));
/* SDRC MR0 register Burst length=4 */
- writel(0x00000032, SDRC_REG(MR_0));
+ writel(0x00000032, OMAP3_SDRC_REG(MR_0));
/* SDRC DLLA control register */
- writel(0x0000000A, SDRC_REG(DLLA_CTRL));
+ writel(0x0000000A, OMAP3_SDRC_REG(DLLA_CTRL));
return;
}
@@ -293,8 +293,8 @@ static int beagle_devices_init(void)
#ifdef CONFIG_USB_EHCI_OMAP
if (ehci_omap_init(&omap_ehci_pdata) >= 0)
- add_usb_ehci_device(DEVICE_ID_DYNAMIC, OMAP_EHCI_BASE,
- OMAP_EHCI_BASE + 0x10, &ehci_pdata);
+ add_usb_ehci_device(DEVICE_ID_DYNAMIC, OMAP3_EHCI_BASE,
+ OMAP3_EHCI_BASE + 0x10, &ehci_pdata);
#endif /* CONFIG_USB_EHCI_OMAP */
#ifdef CONFIG_OMAP_GPMC
/* WP is made high and WAIT1 active Low */
diff --git a/arch/arm/boards/omap343xdsp/board.c b/arch/arm/boards/omap343xdsp/board.c
index 6de86f4..eb752ff 100644
--- a/arch/arm/boards/omap343xdsp/board.c
+++ b/arch/arm/boards/omap343xdsp/board.c
@@ -94,54 +94,54 @@ pure_initcall(sdp343x_board_init);
static void sdrc_init(void)
{
/* Issue SDRC Soft reset */
- writel(0x12, SDRC_REG(SYSCONFIG));
+ writel(0x12, OMAP3_SDRC_REG(SYSCONFIG));
/* Wait until Reset complete */
- while ((readl(SDRC_REG(STATUS)) & 0x1) == 0);
+ while ((readl(OMAP3_SDRC_REG(STATUS)) & 0x1) == 0);
/* SDRC to normal mode */
- writel(0x10, SDRC_REG(SYSCONFIG));
+ writel(0x10, OMAP3_SDRC_REG(SYSCONFIG));
/* SDRC Sharing register */
/* 32-bit SDRAM on data lane [31:0] - CS0 */
/* pin tri-stated = 1 */
- writel(0x00000100, SDRC_REG(SHARING));
+ writel(0x00000100, OMAP3_SDRC_REG(SHARING));
/* ----- SDRC_REG(CS0 Configuration --------- */
/* SDRC_REG(MCFG0 register */
- writel(0x02584019, SDRC_REG(MCFG_0));
+ writel(0x02584019, OMAP3_SDRC_REG(MCFG_0));
/* SDRC_REG(RFR_CTRL0 register */
- writel(0x0003DE01, SDRC_REG(RFR_CTRL_0));
+ writel(0x0003DE01, OMAP3_SDRC_REG(RFR_CTRL_0));
/* SDRC_REG(ACTIM_CTRLA0 register */
- writel(0X5A9A4486, SDRC_REG(ACTIM_CTRLA_0));
+ writel(0X5A9A4486, OMAP3_SDRC_REG(ACTIM_CTRLA_0));
/* SDRC_REG(ACTIM_CTRLB0 register */
- writel(0x00000010, SDRC_REG(ACTIM_CTRLB_0));
+ writel(0x00000010, OMAP3_SDRC_REG(ACTIM_CTRLB_0));
/* Disble Power Down of CKE cuz of 1 CKE on combo part */
- writel(0x00000081, SDRC_REG(POWER));
+ writel(0x00000081, OMAP3_SDRC_REG(POWER));
/* SDRC_REG(Manual command register */
/* NOP command */
- writel(0x00000000, SDRC_REG(MANUAL_0));
+ writel(0x00000000, OMAP3_SDRC_REG(MANUAL_0));
/* Precharge command */
- writel(0x00000001, SDRC_REG(MANUAL_0));
+ writel(0x00000001, OMAP3_SDRC_REG(MANUAL_0));
/* Auto-refresh command */
- writel(0x00000002, SDRC_REG(MANUAL_0));
+ writel(0x00000002, OMAP3_SDRC_REG(MANUAL_0));
/* Auto-refresh command */
- writel(0x00000002, SDRC_REG(MANUAL_0));
+ writel(0x00000002, OMAP3_SDRC_REG(MANUAL_0));
/* SDRC MR0 register */
/* CAS latency = 3 */
/* Write Burst = Read Burst */
/* Serial Mode */
- writel(0x00000032, SDRC_REG(MR_0)); /* Burst length =4 */
+ writel(0x00000032, OMAP3_SDRC_REG(MR_0)); /* Burst length =4 */
/* SDRC DLLA control register */
/* Enable DLL A */
- writel(0x0000000A, SDRC_REG(DLLA_CTRL));
+ writel(0x0000000A, OMAP3_SDRC_REG(DLLA_CTRL));
/* wait until DLL is locked */
- while ((readl(SDRC_REG(DLLA_STATUS)) & 0x4) == 0);
+ while ((readl(OMAP3_SDRC_REG(DLLA_STATUS)) & 0x4) == 0);
return;
}
diff --git a/arch/arm/boards/omap3evm/board.c b/arch/arm/boards/omap3evm/board.c
index 179450f..03d3ab8 100644
--- a/arch/arm/boards/omap3evm/board.c
+++ b/arch/arm/boards/omap3evm/board.c
@@ -71,47 +71,47 @@ static void sdrc_init(void)
{
/* SDRAM software reset */
/* No idle ack and RESET enable */
- writel(0x1A, SDRC_REG(SYSCONFIG));
+ writel(0x1A, OMAP3_SDRC_REG(SYSCONFIG));
sdelay(100);
/* No idle ack and RESET disable */
- writel(0x18, SDRC_REG(SYSCONFIG));
+ writel(0x18, OMAP3_SDRC_REG(SYSCONFIG));
/* SDRC Sharing register */
/* 32-bit SDRAM on data lane [31:0] - CS0 */
/* pin tri-stated = 1 */
- writel(0x00000100, SDRC_REG(SHARING));
+ writel(0x00000100, OMAP3_SDRC_REG(SHARING));
/* ----- SDRC Registers Configuration --------- */
/* SDRC_MCFG0 register */
- writel(0x02584099, SDRC_REG(MCFG_0));
+ writel(0x02584099, OMAP3_SDRC_REG(MCFG_0));
/* SDRC_RFR_CTRL0 register */
- writel(0x54601, SDRC_REG(RFR_CTRL_0));
+ writel(0x54601, OMAP3_SDRC_REG(RFR_CTRL_0));
/* SDRC_ACTIM_CTRLA0 register */
- writel(0xA29DB4C6, SDRC_REG(ACTIM_CTRLA_0));
+ writel(0xA29DB4C6, OMAP3_SDRC_REG(ACTIM_CTRLA_0));
/* SDRC_ACTIM_CTRLB0 register */
- writel(0x12214, SDRC_REG(ACTIM_CTRLB_0));
+ writel(0x12214, OMAP3_SDRC_REG(ACTIM_CTRLB_0));
/* Disble Power Down of CKE due to 1 CKE on combo part */
- writel(0x00000081, SDRC_REG(POWER));
+ writel(0x00000081, OMAP3_SDRC_REG(POWER));
/* SDRC_MANUAL command register */
/* NOP command */
- writel(0x00000000, SDRC_REG(MANUAL_0));
+ writel(0x00000000, OMAP3_SDRC_REG(MANUAL_0));
/* Precharge command */
- writel(0x00000001, SDRC_REG(MANUAL_0));
+ writel(0x00000001, OMAP3_SDRC_REG(MANUAL_0));
/* Auto-refresh command */
- writel(0x00000002, SDRC_REG(MANUAL_0));
+ writel(0x00000002, OMAP3_SDRC_REG(MANUAL_0));
/* Auto-refresh command */
- writel(0x00000002, SDRC_REG(MANUAL_0));
+ writel(0x00000002, OMAP3_SDRC_REG(MANUAL_0));
/* SDRC MR0 register Burst length=4 */
- writel(0x00000032, SDRC_REG(MR_0));
+ writel(0x00000032, OMAP3_SDRC_REG(MR_0));
/* SDRC DLLA control register */
- writel(0x0000000A, SDRC_REG(DLLA_CTRL));
+ writel(0x0000000A, OMAP3_SDRC_REG(DLLA_CTRL));
return;
}
diff --git a/arch/arm/boards/phycard-a-l1/pca-a-l1.c b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
index 3b89631..b582d71 100644
--- a/arch/arm/boards/phycard-a-l1/pca-a-l1.c
+++ b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
@@ -103,16 +103,16 @@ struct sdrc_config {
void init_sdram_ddr(void)
{
/* reset sdrc controller */
- writel(SOFTRESET, SDRC_REG(SYSCONFIG));
- wait_on_value(1<<0, 1<<0, SDRC_REG(STATUS), 12000000);
- writel(0, SDRC_REG(SYSCONFIG));
+ writel(SOFTRESET, OMAP3_SDRC_REG(SYSCONFIG));
+ wait_on_value(1<<0, 1<<0, OMAP3_SDRC_REG(STATUS), 12000000);
+ writel(0, OMAP3_SDRC_REG(SYSCONFIG));
/* setup sdrc to ball mux */
- writel(SDP_SDRC_SHARING, SDRC_REG(SHARING));
- writel(SDP_SDRC_POWER_POP, SDRC_REG(POWER));
+ writel(SDP_SDRC_SHARING, OMAP3_SDRC_REG(SHARING));
+ writel(SDP_SDRC_POWER_POP, OMAP3_SDRC_REG(POWER));
/* set up dll */
- writel(SDP_SDRC_DLLAB_CTRL, SDRC_REG(DLLA_CTRL));
+ writel(SDP_SDRC_DLLAB_CTRL, OMAP3_SDRC_REG(DLLA_CTRL));
sdelay(0x2000); /* give time to lock */
}
@@ -122,21 +122,21 @@ void init_sdram_ddr(void)
void config_sdram_ddr(u8 cs, u8 cfg)
{
- writel(sdrc_config[cfg].mcfg, SDRC_REG(MCFG_0) + (0x30 * cs));
- writel(sdrc_config[cfg].actim_ctrla, SDRC_REG(ACTIM_CTRLA_0) + (0x28 * cs));
- writel(sdrc_config[cfg].actim_ctrlb, SDRC_REG(ACTIM_CTRLB_0) + (0x28 * cs));
- writel(sdrc_config[cfg].rfr_ctrl, SDRC_REG(RFR_CTRL_0) + (0x30 * cs));
+ writel(sdrc_config[cfg].mcfg, OMAP3_SDRC_REG(MCFG_0) + (0x30 * cs));
+ writel(sdrc_config[cfg].actim_ctrla, OMAP3_SDRC_REG(ACTIM_CTRLA_0) + (0x28 * cs));
+ writel(sdrc_config[cfg].actim_ctrlb, OMAP3_SDRC_REG(ACTIM_CTRLB_0) + (0x28 * cs));
+ writel(sdrc_config[cfg].rfr_ctrl, OMAP3_SDRC_REG(RFR_CTRL_0) + (0x30 * cs));
- writel(CMD_NOP, SDRC_REG(MANUAL_0) + (0x30 * cs));
+ writel(CMD_NOP, OMAP3_SDRC_REG(MANUAL_0) + (0x30 * cs));
sdelay(5000);
- writel(CMD_PRECHARGE, SDRC_REG(MANUAL_0) + (0x30 * cs));
- writel(CMD_AUTOREFRESH, SDRC_REG(MANUAL_0) + (0x30 * cs));
- writel(CMD_AUTOREFRESH, SDRC_REG(MANUAL_0) + (0x30 * cs));
+ writel(CMD_PRECHARGE, OMAP3_SDRC_REG(MANUAL_0) + (0x30 * cs));
+ writel(CMD_AUTOREFRESH, OMAP3_SDRC_REG(MANUAL_0) + (0x30 * cs));
+ writel(CMD_AUTOREFRESH, OMAP3_SDRC_REG(MANUAL_0) + (0x30 * cs));
/* set mr0 */
- writel(sdrc_config[cfg].mr, SDRC_REG(MR_0) + (0x30 * cs));
+ writel(sdrc_config[cfg].mr, OMAP3_SDRC_REG(MR_0) + (0x30 * cs));
sdelay(2000);
}
@@ -171,7 +171,7 @@ static void pcaal1_sdrc_init(void)
if (test1 == 0) {
init_sdram_ddr();
- writel((sdrc_config[(uchar) cfg].mcfg & 0xfffc00ff), SDRC_REG(MCFG_1));
+ writel((sdrc_config[(uchar) cfg].mcfg & 0xfffc00ff), OMAP3_SDRC_REG(MCFG_1));
/* 1 x 256MByte */
if (test0 == SZ_256M)
@@ -179,7 +179,7 @@ static void pcaal1_sdrc_init(void)
if (cfg != -1) {
config_sdram_ddr(0, cfg);
- writel(sdrc_config[(uchar) cfg].cs_cfg, SDRC_REG(CS_CFG));
+ writel(sdrc_config[(uchar) cfg].cs_cfg, OMAP3_SDRC_REG(CS_CFG));
}
return;
}
@@ -194,7 +194,7 @@ static void pcaal1_sdrc_init(void)
if (cfg != -1) {
init_sdram_ddr();
- writel(sdrc_config[(uchar) cfg].cs_cfg, SDRC_REG(CS_CFG));
+ writel(sdrc_config[(uchar) cfg].cs_cfg, OMAP3_SDRC_REG(CS_CFG));
config_sdram_ddr(0, cfg);
config_sdram_ddr(1, cfg);
}
diff --git a/arch/arm/mach-omap/include/mach/control.h b/arch/arm/mach-omap/include/mach/control.h
index e03d8d5..1cc4cd4 100644
--- a/arch/arm/mach-omap/include/mach/control.h
+++ b/arch/arm/mach-omap/include/mach/control.h
@@ -31,7 +31,7 @@
* Control register defintion which unwraps to the real register
* offset + base address
*/
-#define CONTROL_REG(REGNAME) (OMAP_CTRL_BASE + CONTROL_##REGNAME)
+#define OMAP3_CONTROL_REG(REGNAME) (OMAP3_CTRL_BASE + CONTROL_##REGNAME)
#define CONTROL_SCALABLE_OMAP_STATUS (0x44C)
#define CONTROL_SCALABLE_OMAP_OCP (0x534)
@@ -79,7 +79,7 @@
/** Provide the Regoffset, Value */
#define MUX_VAL(OFFSET,VALUE)\
- writew((VALUE), OMAP_CTRL_BASE + (OFFSET))
+ writew((VALUE), OMAP3_CTRL_BASE + (OFFSET))
/**
* macro for Padconfig Registers @see
diff --git a/arch/arm/mach-omap/include/mach/omap3-clock.h b/arch/arm/mach-omap/include/mach/omap3-clock.h
index 00ce6a5..1ef46aa 100644
--- a/arch/arm/mach-omap/include/mach/omap3-clock.h
+++ b/arch/arm/mach-omap/include/mach/omap3-clock.h
@@ -23,7 +23,7 @@
#define _OMAP343X_CLOCKS_H_
/** CM Clock Regs Wrapper */
-#define CM_REG(REGNAME) (OMAP_CM_BASE + CM_##REGNAME)
+#define OMAP3_CM_REG(REGNAME) (OMAP3_CM_BASE + CM_##REGNAME)
#define CM_FCLKEN_IVA2 0X0000
#define CM_CLKEN_PLL_IVA2 0X0004
@@ -73,7 +73,7 @@
#define CM_CLKSTCTRL_USBH 0x1448
/** PRM Clock Regs */
-#define PRM_REG(REGNAME) (OMAP_PRM_BASE + PRM_##REGNAME)
+#define OMAP3_PRM_REG(REGNAME) (OMAP3_PRM_BASE + PRM_##REGNAME)
#define PRM_CLKSEL 0x0D40
#define PRM_RSTCTRL 0x1250
#define PRM_CLKSRC_CTRL 0x1270
diff --git a/arch/arm/mach-omap/include/mach/omap3-devices.h b/arch/arm/mach-omap/include/mach/omap3-devices.h
index 555e86f..6617430 100644
--- a/arch/arm/mach-omap/include/mach/omap3-devices.h
+++ b/arch/arm/mach-omap/include/mach/omap3-devices.h
@@ -38,47 +38,47 @@ static inline struct device_d *omap3_add_spi4(void)
static inline struct device_d *omap3_add_uart1(void)
{
- return omap_add_uart(0, OMAP_UART1_BASE);
+ return omap_add_uart(0, OMAP3_UART1_BASE);
}
static inline struct device_d *omap3_add_uart2(void)
{
- return omap_add_uart(1, OMAP_UART2_BASE);
+ return omap_add_uart(1, OMAP3_UART2_BASE);
}
static inline struct device_d *omap3_add_uart3(void)
{
- return omap_add_uart(2, OMAP_UART3_BASE);
+ return omap_add_uart(2, OMAP3_UART3_BASE);
}
static inline struct device_d *omap3_add_mmc1(struct omap_hsmmc_platform_data *pdata)
{
- return omap_add_mmc(0, OMAP_MMC1_BASE, pdata);
+ return omap_add_mmc(0, OMAP3_MMC1_BASE, pdata);
}
static inline struct device_d *omap3_add_mmc2(struct omap_hsmmc_platform_data *pdata)
{
- return omap_add_mmc(1, OMAP_MMC2_BASE, pdata);
+ return omap_add_mmc(1, OMAP3_MMC2_BASE, pdata);
}
static inline struct device_d *omap3_add_mmc3(struct omap_hsmmc_platform_data *pdata)
{
- return omap_add_mmc(2, OMAP_MMC3_BASE, pdata);
+ return omap_add_mmc(2, OMAP3_MMC3_BASE, pdata);
}
static inline struct device_d *omap3_add_i2c1(void *pdata)
{
- return omap_add_i2c(0, OMAP_I2C1_BASE, pdata);
+ return omap_add_i2c(0, OMAP3_I2C1_BASE, pdata);
}
static inline struct device_d *omap3_add_i2c2(void *pdata)
{
- return omap_add_i2c(1, OMAP_I2C2_BASE, pdata);
+ return omap_add_i2c(1, OMAP3_I2C2_BASE, pdata);
}
static inline struct device_d *omap3_add_i2c3(void *pdata)
{
- return omap_add_i2c(2, OMAP_I2C3_BASE, pdata);
+ return omap_add_i2c(2, OMAP3_I2C3_BASE, pdata);
}
#endif /* __MACH_OMAP3_DEVICES_H */
diff --git a/arch/arm/mach-omap/include/mach/omap3-silicon.h b/arch/arm/mach-omap/include/mach/omap3-silicon.h
index 0cf43bd..282b587 100644
--- a/arch/arm/mach-omap/include/mach/omap3-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap3-silicon.h
@@ -34,82 +34,82 @@
/* PLEASE PLACE ONLY BASE DEFINES HERE */
/** OMAP Internal Bus Base addresses */
-#define OMAP_L4_CORE_BASE 0x48000000
-#define OMAP_INTC_BASE 0x48200000
-#define OMAP_L4_WKUP_BASE 0x48300000
-#define OMAP_L4_PER_BASE 0x49000000
-#define OMAP_L4_EMU_BASE 0x54000000
-#define OMAP_SGX_BASE 0x50000000
-#define OMAP_IVA_BASE 0x5C000000
-#define OMAP_SMX_APE_BASE 0x68000000
-#define OMAP_SMS_BASE 0x6C000000
-#define OMAP_SDRC_BASE 0x6D000000
+#define OMAP3_L4_CORE_BASE 0x48000000
+#define OMAP3_INTC_BASE 0x48200000
+#define OMAP3_L4_WKUP_BASE 0x48300000
+#define OMAP3_L4_PER_BASE 0x49000000
+#define OMAP3_L4_EMU_BASE 0x54000000
+#define OMAP3_SGX_BASE 0x50000000
+#define OMAP3_IVA_BASE 0x5C000000
+#define OMAP3_SMX_APE_BASE 0x68000000
+#define OMAP3_SMS_BASE 0x6C000000
+#define OMAP3_SDRC_BASE 0x6D000000
#define OMAP3_GPMC_BASE 0x6E000000
/** Peripheral Base Addresses */
-#define OMAP_CTRL_BASE (OMAP_L4_CORE_BASE + 0x02000)
-#define OMAP_CM_BASE (OMAP_L4_CORE_BASE + 0x04000)
-#define OMAP_PRM_BASE (OMAP_L4_WKUP_BASE + 0x06000)
-
-#define OMAP_UART1_BASE (OMAP_L4_CORE_BASE + 0x6A000)
-#define OMAP_UART2_BASE (OMAP_L4_CORE_BASE + 0x6C000)
-#define OMAP_UART3_BASE (OMAP_L4_PER_BASE + 0x20000)
-
-#define OMAP_I2C1_BASE (OMAP_L4_CORE_BASE + 0x70000)
-#define OMAP_I2C2_BASE (OMAP_L4_CORE_BASE + 0x72000)
-#define OMAP_I2C3_BASE (OMAP_L4_CORE_BASE + 0x60000)
-
-#define OMAP_GPTIMER1_BASE (OMAP_L4_WKUP_BASE + 0x18000)
-#define OMAP_GPTIMER2_BASE (OMAP_L4_PER_BASE + 0x32000)
-#define OMAP_GPTIMER3_BASE (OMAP_L4_PER_BASE + 0x34000)
-#define OMAP_GPTIMER4_BASE (OMAP_L4_PER_BASE + 0x36000)
-#define OMAP_GPTIMER5_BASE (OMAP_L4_PER_BASE + 0x38000)
-#define OMAP_GPTIMER6_BASE (OMAP_L4_PER_BASE + 0x3A000)
-#define OMAP_GPTIMER7_BASE (OMAP_L4_PER_BASE + 0x3C000)
-#define OMAP_GPTIMER8_BASE (OMAP_L4_PER_BASE + 0x3E000)
-#define OMAP_GPTIMER9_BASE (OMAP_L4_PER_BASE + 0x40000)
-#define OMAP_GPTIMER10_BASE (OMAP_L4_CORE_BASE + 0x86000)
-#define OMAP_GPTIMER11_BASE (OMAP_L4_CORE_BASE + 0x88000)
-
-#define OMAP_WDTIMER2_BASE (OMAP_L4_WKUP_BASE + 0x14000)
-#define OMAP_WDTIMER3_BASE (OMAP_L4_PER_BASE + 0x30000)
-
-#define OMAP3_32KTIMER_BASE (OMAP_L4_WKUP_BASE + 0x20000)
-
-#define OMAP_MMC1_BASE (OMAP_L4_CORE_BASE + 0x9C000)
-#define OMAP_MMC2_BASE (OMAP_L4_CORE_BASE + 0xB4000)
-#define OMAP_MMC3_BASE (OMAP_L4_CORE_BASE + 0xAD000)
-
-#define OMAP_MUSB0_BASE (OMAP_L4_CORE_BASE + 0xAB000)
-
-#define OMAP_GPIO1_BASE (OMAP_L4_WKUP_BASE + 0x10000)
-#define OMAP_GPIO2_BASE (OMAP_L4_PER_BASE + 0x50000)
-#define OMAP_GPIO3_BASE (OMAP_L4_PER_BASE + 0x52000)
-#define OMAP_GPIO4_BASE (OMAP_L4_PER_BASE + 0x54000)
-#define OMAP_GPIO5_BASE (OMAP_L4_PER_BASE + 0x56000)
-#define OMAP_GPIO6_BASE (OMAP_L4_PER_BASE + 0x58000)
+#define OMAP3_CTRL_BASE (OMAP3_L4_CORE_BASE + 0x02000)
+#define OMAP3_CM_BASE (OMAP3_L4_CORE_BASE + 0x04000)
+#define OMAP3_PRM_BASE (OMAP3_L4_WKUP_BASE + 0x06000)
+
+#define OMAP3_UART1_BASE (OMAP3_L4_CORE_BASE + 0x6A000)
+#define OMAP3_UART2_BASE (OMAP3_L4_CORE_BASE + 0x6C000)
+#define OMAP3_UART3_BASE (OMAP3_L4_PER_BASE + 0x20000)
+
+#define OMAP3_I2C1_BASE (OMAP3_L4_CORE_BASE + 0x70000)
+#define OMAP3_I2C2_BASE (OMAP3_L4_CORE_BASE + 0x72000)
+#define OMAP3_I2C3_BASE (OMAP3_L4_CORE_BASE + 0x60000)
+
+#define OMAP3_GPTIMER1_BASE (OMAP3_L4_WKUP_BASE + 0x18000)
+#define OMAP3_GPTIMER2_BASE (OMAP3_L4_PER_BASE + 0x32000)
+#define OMAP3_GPTIMER3_BASE (OMAP3_L4_PER_BASE + 0x34000)
+#define OMAP3_GPTIMER4_BASE (OMAP3_L4_PER_BASE + 0x36000)
+#define OMAP3_GPTIMER5_BASE (OMAP3_L4_PER_BASE + 0x38000)
+#define OMAP3_GPTIMER6_BASE (OMAP3_L4_PER_BASE + 0x3A000)
+#define OMAP3_GPTIMER7_BASE (OMAP3_L4_PER_BASE + 0x3C000)
+#define OMAP3_GPTIMER8_BASE (OMAP3_L4_PER_BASE + 0x3E000)
+#define OMAP3_GPTIMER9_BASE (OMAP3_L4_PER_BASE + 0x40000)
+#define OMAP3_GPTIMER10_BASE (OMAP3_L4_CORE_BASE + 0x86000)
+#define OMAP3_GPTIMER11_BASE (OMAP3_L4_CORE_BASE + 0x88000)
+
+#define OMAP3_WDTIMER2_BASE (OMAP3_L4_WKUP_BASE + 0x14000)
+#define OMAP3_WDTIMER3_BASE (OMAP3_L4_PER_BASE + 0x30000)
+
+#define OMAP3_32KTIMER_BASE (OMAP3_L4_WKUP_BASE + 0x20000)
+
+#define OMAP3_MMC1_BASE (OMAP3_L4_CORE_BASE + 0x9C000)
+#define OMAP3_MMC2_BASE (OMAP3_L4_CORE_BASE + 0xB4000)
+#define OMAP3_MMC3_BASE (OMAP3_L4_CORE_BASE + 0xAD000)
+
+#define OMAP3_MUSB0_BASE (OMAP3_L4_CORE_BASE + 0xAB000)
+
+#define OMAP3_GPIO1_BASE (OMAP3_L4_WKUP_BASE + 0x10000)
+#define OMAP3_GPIO2_BASE (OMAP3_L4_PER_BASE + 0x50000)
+#define OMAP3_GPIO3_BASE (OMAP3_L4_PER_BASE + 0x52000)
+#define OMAP3_GPIO4_BASE (OMAP3_L4_PER_BASE + 0x54000)
+#define OMAP3_GPIO5_BASE (OMAP3_L4_PER_BASE + 0x56000)
+#define OMAP3_GPIO6_BASE (OMAP3_L4_PER_BASE + 0x58000)
/** MPU WDT Definition */
-#define OMAP_MPU_WDTIMER_BASE OMAP_WDTIMER2_BASE
+#define OMAP3_MPU_WDTIMER_BASE OMAP3_WDTIMER2_BASE
-#define OMAP_HSUSB_OTG_BASE (OMAP_L4_CORE_BASE + 0xAB000)
-#define OMAP_USBTLL_BASE (OMAP_L4_CORE_BASE + 0x62000)
-#define OMAP_UHH_CONFIG_BASE (OMAP_L4_CORE_BASE + 0x64000)
-#define OMAP_OHCI_BASE (OMAP_L4_CORE_BASE + 0x64400)
-#define OMAP_EHCI_BASE (OMAP_L4_CORE_BASE + 0x64800)
+#define OMAP3_HSUSB_OTG_BASE (OMAP3_L4_CORE_BASE + 0xAB000)
+#define OMAP3_USBTLL_BASE (OMAP3_L4_CORE_BASE + 0x62000)
+#define OMAP3_UHH_CONFIG_BASE (OMAP3_L4_CORE_BASE + 0x64000)
+#define OMAP3_OHCI_BASE (OMAP3_L4_CORE_BASE + 0x64400)
+#define OMAP3_EHCI_BASE (OMAP3_L4_CORE_BASE + 0x64800)
/** Interrupt Vector base address */
-#define OMAP_SRAM_BASE 0x40200000
-#define OMAP_SRAM_INTVECT 0x4020F800
-#define OMAP_SRAM_INTVECT_COPYSIZE 0x64
+#define OMAP3_SRAM_BASE 0x40200000
+#define OMAP3_SRAM_INTVECT 0x4020F800
+#define OMAP3_SRAM_INTVECT_COPYSIZE 0x64
/** Gives the silicon revision */
-#define OMAP_TAP_BASE (OMAP_L4_WKUP_BASE + 0xA000)
-#define IDCODE_REG (OMAP_TAP_BASE + 0x204)
-#define DIE_ID_0 (OMAP_TAP_BASE + 0x218)
-#define DIE_ID_1 (OMAP_TAP_BASE + 0x21c)
-#define DIE_ID_2 (OMAP_TAP_BASE + 0x220)
-#define DIE_ID_3 (OMAP_TAP_BASE + 0x224)
+#define OMAP3_TAP_BASE (OMAP3_L4_WKUP_BASE + 0xA000)
+#define OMAP3_IDCODE_REG (OMAP3_TAP_BASE + 0x204)
+#define OMAP3_DIE_ID_0 (OMAP3_TAP_BASE + 0x218)
+#define OMAP3_DIE_ID_1 (OMAP3_TAP_BASE + 0x21c)
+#define OMAP3_DIE_ID_2 (OMAP3_TAP_BASE + 0x220)
+#define OMAP3_DIE_ID_3 (OMAP3_TAP_BASE + 0x224)
/** Masks to extract information from ID code register */
#define IDCODE_HAWKEYE_MASK 0x0FFFF000
diff --git a/arch/arm/mach-omap/include/mach/omap3-smx.h b/arch/arm/mach-omap/include/mach/omap3-smx.h
index f7fa4d2..fb444b8 100644
--- a/arch/arm/mach-omap/include/mach/omap3-smx.h
+++ b/arch/arm/mach-omap/include/mach/omap3-smx.h
@@ -28,11 +28,11 @@
#define __ASM_ARCH_OMAP_SMX_H
/* SMX-APE */
-#define PM_RT_APE_BASE_ADDR_ARM (OMAP_SMX_APE_BASE + 0x10000)
-#define PM_GPMC_BASE_ADDR_ARM (OMAP_SMX_APE_BASE + 0x12400)
-#define PM_OCM_RAM_BASE_ADDR_ARM (OMAP_SMX_APE_BASE + 0x12800)
-#define PM_OCM_ROM_BASE_ADDR_ARM (OMAP_SMX_APE_BASE + 0x12C00)
-#define PM_IVA2_BASE_ADDR_ARM (OMAP_SMX_APE_BASE + 0x14000)
+#define PM_RT_APE_BASE_ADDR_ARM (OMAP3_SMX_APE_BASE + 0x10000)
+#define PM_GPMC_BASE_ADDR_ARM (OMAP3_SMX_APE_BASE + 0x12400)
+#define PM_OCM_RAM_BASE_ADDR_ARM (OMAP3_SMX_APE_BASE + 0x12800)
+#define PM_OCM_ROM_BASE_ADDR_ARM (OMAP3_SMX_APE_BASE + 0x12C00)
+#define PM_IVA2_BASE_ADDR_ARM (OMAP3_SMX_APE_BASE + 0x14000)
#define RT_REQ_INFO_PERMISSION_1 (PM_RT_APE_BASE_ADDR_ARM + 0x68)
#define RT_READ_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x50)
@@ -54,9 +54,9 @@
#define IVA2_WRITE_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x58)
/* SMS */
-#define SMS_SYSCONFIG (OMAP_SMS_BASE + 0x10)
-#define SMS_RG_ATT0 (OMAP_SMS_BASE + 0x48)
-#define SMS_CLASS_ARB0 (OMAP_SMS_BASE + 0xD0)
+#define SMS_SYSCONFIG (OMAP3_SMS_BASE + 0x10)
+#define SMS_RG_ATT0 (OMAP3_SMS_BASE + 0x48)
+#define SMS_CLASS_ARB0 (OMAP3_SMS_BASE + 0xD0)
#define BURSTCOMPLETE_GROUP7 (0x1 << 31)
#endif /* __ASM_ARCH_OMAP_SMX_H */
diff --git a/arch/arm/mach-omap/include/mach/sdrc.h b/arch/arm/mach-omap/include/mach/sdrc.h
index 73031b9..434f119 100644
--- a/arch/arm/mach-omap/include/mach/sdrc.h
+++ b/arch/arm/mach-omap/include/mach/sdrc.h
@@ -24,7 +24,7 @@
#ifndef _ASM_ARCH_SDRC_H
#define _ASM_ARCH_SDRC_H
-#define SDRC_REG(REGNAME) (OMAP_SDRC_BASE + OMAP_SDRC_##REGNAME)
+#define OMAP3_SDRC_REG(REGNAME) (OMAP3_SDRC_BASE + OMAP_SDRC_##REGNAME)
#define OMAP_SDRC_SYSCONFIG (0x10)
#define OMAP_SDRC_STATUS (0x14)
#define OMAP_SDRC_CS_CFG (0x40)
diff --git a/arch/arm/mach-omap/include/mach/wdt.h b/arch/arm/mach-omap/include/mach/wdt.h
index 10cb1f4..5f3bb60 100644
--- a/arch/arm/mach-omap/include/mach/wdt.h
+++ b/arch/arm/mach-omap/include/mach/wdt.h
@@ -21,7 +21,7 @@
#define __ASM_ARCH_OMAP_WDT_H
/** Watchdog Register defines */
-#define WDT_REG(REGNAME) (OMAP_MPU_WDTIMER_BASE + OMAP_WDT_##REGNAME)
+#define OMAP3_WDT_REG(REGNAME) (OMAP3_MPU_WDTIMER_BASE + OMAP_WDT_##REGNAME)
#define OMAP_WDT_WIDR (0x000)
#define OMAP_WDT_SYSCONFIG (0x010)
#define OMAP_WDT_WD_SYSSTATUS (0x014)
diff --git a/arch/arm/mach-omap/omap3_clock.c b/arch/arm/mach-omap/omap3_clock.c
index 5cf2747..bcde48f 100644
--- a/arch/arm/mach-omap/omap3_clock.c
+++ b/arch/arm/mach-omap/omap3_clock.c
@@ -58,7 +58,7 @@ static u32 get_osc_clk_speed(void)
{
u32 start, cstart, cend, cdiff, cdiv, val;
- val = readl(PRM_REG(CLKSRC_CTRL));
+ val = readl(OMAP3_PRM_REG(CLKSRC_CTRL));
if (val & SYSCLK_DIV_2)
cdiv = 2;
@@ -72,28 +72,28 @@ static u32 get_osc_clk_speed(void)
cdiv = 1;
/* enable timer2 */
- val = readl(CM_REG(CLKSEL_WKUP)) | (0x1 << 0);
- writel(val, CM_REG(CLKSEL_WKUP)); /* select sys_clk for GPT1 */
+ val = readl(OMAP3_CM_REG(CLKSEL_WKUP)) | (0x1 << 0);
+ writel(val, OMAP3_CM_REG(CLKSEL_WKUP)); /* select sys_clk for GPT1 */
/* Enable I and F Clocks for GPT1 */
- val = readl(CM_REG(ICLKEN_WKUP)) | (0x1 << 0) | (0x1 << 2);
- writel(val, CM_REG(ICLKEN_WKUP));
- val = readl(CM_REG(FCLKEN_WKUP)) | (0x1 << 0);
- writel(val, CM_REG(FCLKEN_WKUP));
+ val = readl(OMAP3_CM_REG(ICLKEN_WKUP)) | (0x1 << 0) | (0x1 << 2);
+ writel(val, OMAP3_CM_REG(ICLKEN_WKUP));
+ val = readl(OMAP3_CM_REG(FCLKEN_WKUP)) | (0x1 << 0);
+ writel(val, OMAP3_CM_REG(FCLKEN_WKUP));
/* start counting at 0 */
- writel(0, OMAP_GPTIMER1_BASE + TLDR);
+ writel(0, OMAP3_GPTIMER1_BASE + TLDR);
/* enable clock */
- writel(GPT_EN, OMAP_GPTIMER1_BASE + TCLR);
+ writel(GPT_EN, OMAP3_GPTIMER1_BASE + TCLR);
/* enable 32kHz source - enabled out of reset */
/* determine sys_clk via gauging */
start = 20 + readl(S32K_CR); /* start time in 20 cycles */
while (readl(S32K_CR) < start) ; /* dead loop till start time */
/* get start sys_clk count */
- cstart = readl(OMAP_GPTIMER1_BASE + TCRR);
+ cstart = readl(OMAP3_GPTIMER1_BASE + TCRR);
while (readl(S32K_CR) < (start + 20)) ; /* wait for 40 cycles */
/* get end sys_clk count */
- cend = readl(OMAP_GPTIMER1_BASE + TCRR);
+ cend = readl(OMAP3_GPTIMER1_BASE + TCRR);
cdiff = cend - cstart; /* get elapsed ticks */
if (cdiv == 2)
@@ -171,8 +171,8 @@ static void init_core_dpll_34x(u32 cpu_rev, u32 clk_sel)
dp += clk_sel;
if (running_in_sram()) {
- sr32(CM_REG(CLKEN_PLL), 0, 3, PLL_FAST_RELOCK_BYPASS);
- wait_on_value((0x1 << 0), 0, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_FAST_RELOCK_BYPASS);
+ wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
/*
* OMAP3430 ES1.0 Errata 1.50
@@ -181,34 +181,34 @@ static void init_core_dpll_34x(u32 cpu_rev, u32 clk_sel)
*/
/* CM_CLKSEL1_EMU[DIV_DPLL3] */
- sr32(CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2 + 1);
- sr32(CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2);
+ sr32(OMAP3_CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2 + 1);
+ sr32(OMAP3_CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2);
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
- sr32(CM_REG(CLKSEL1_PLL), 27, 2, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 27, 2, dp->m2);
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
- sr32(CM_REG(CLKSEL1_PLL), 16, 11, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 16, 11, dp->m);
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
- sr32(CM_REG(CLKSEL1_PLL), 8, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 8, 7, dp->n);
/* Set source CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
- sr32(CM_REG(CLKSEL1_PLL), 6, 1, 0);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 6, 1, 0);
- sr32(CM_REG(CLKSEL_CORE), 8, 4, CORE_SSI_DIV);
- sr32(CM_REG(CLKSEL_CORE), 4, 2, CORE_FUSB_DIV);
- sr32(CM_REG(CLKSEL_CORE), 2, 2, CORE_L4_DIV);
- sr32(CM_REG(CLKSEL_CORE), 0, 2, CORE_L3_DIV);
- sr32(CM_REG(CLKSEL_GFX), 0, 3, GFX_DIV_34X);
- sr32(CM_REG(CLKSEL_WKUP), 1, 2, WKUP_RSM);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 8, 4, CORE_SSI_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 4, 2, CORE_FUSB_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 2, 2, CORE_L4_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 0, 2, CORE_L3_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_GFX), 0, 3, GFX_DIV_34X);
+ sr32(OMAP3_CM_REG(CLKSEL_WKUP), 1, 2, WKUP_RSM);
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
- sr32(CM_REG(CLKEN_PLL), 4, 4, dp->fsel);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 4, 4, dp->fsel);
/* Lock Mode */
- sr32(CM_REG(CLKEN_PLL), 0, 3, PLL_LOCK);
- wait_on_value((0x1 << 0), 1, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_LOCK);
+ wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
} else if (running_in_flash()) {
/***Oopps.. Wrong .config!! *****/
hang();
@@ -242,41 +242,41 @@ static void init_per_dpll_34x(u32 cpu_rev, u32 clk_sel)
* value and then write the default value.
*/
- sr32(CM_REG(CLKEN_PLL), 16, 3, PLL_STOP);
- wait_on_value((0x1 << 1), 0, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_STOP);
+ wait_on_value((0x1 << 1), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
/* Set M6 */
- sr32(CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2 + 1);
- sr32(CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2);
+ sr32(OMAP3_CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2 + 1);
+ sr32(OMAP3_CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2);
/* Set M5 */
- sr32(CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2 + 1);
- sr32(CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2);
+ sr32(OMAP3_CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2 + 1);
+ sr32(OMAP3_CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2);
/* Set M4 */
- sr32(CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2 + 1);
- sr32(CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2);
+ sr32(OMAP3_CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2 + 1);
+ sr32(OMAP3_CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2);
/* Set M3 */
- sr32(CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2 + 1);
- sr32(CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2);
+ sr32(OMAP3_CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2 + 1);
+ sr32(OMAP3_CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2);
/* Set M2 */
- sr32(CM_REG(CLKSEL3_PLL), 0, 5, dp->m2 + 1);
- sr32(CM_REG(CLKSEL3_PLL), 0, 5, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL3_PLL), 0, 5, dp->m2 + 1);
+ sr32(OMAP3_CM_REG(CLKSEL3_PLL), 0, 5, dp->m2);
/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */
- sr32(CM_REG(CLKSEL2_PLL), 8, 11, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL), 8, 11, dp->m);
/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
- sr32(CM_REG(CLKSEL2_PLL), 0, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL), 0, 7, dp->n);
/* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */
- sr32(CM_REG(CLKEN_PLL), 20, 4, dp->fsel);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 20, 4, dp->fsel);
/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
- sr32(CM_REG(CLKEN_PLL), 16, 3, PLL_LOCK);
- wait_on_value((0x1 << 1), 2, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_LOCK);
+ wait_on_value((0x1 << 1), 2, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
}
static struct dpll_param mpu_dpll_param_34x_es1[] = {
@@ -316,16 +316,16 @@ static void init_mpu_dpll_34x(u32 cpu_rev, u32 clk_sel)
dp += clk_sel;
/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
- sr32(CM_REG(CLKSEL2_PLL_MPU), 0, 5, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL_MPU), 0, 5, dp->m2);
/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
- sr32(CM_REG(CLKSEL1_PLL_MPU), 8, 11, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 8, 11, dp->m);
/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
- sr32(CM_REG(CLKSEL1_PLL_MPU), 0, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 0, 7, dp->n);
/* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
- sr32(CM_REG(CLKEN_PLL_MPU), 4, 4, dp->fsel);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 4, 4, dp->fsel);
}
static struct dpll_param iva_dpll_param_34x_es1[] = {
@@ -362,24 +362,24 @@ static void init_iva_dpll_34x(u32 cpu_rev, u32 clk_sel)
dp += clk_sel;
/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
- sr32(CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_STOP);
- wait_on_value((0x1 << 0), 0, CM_REG(IDLEST_PLL_IVA2), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_STOP);
+ wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
- sr32(CM_REG(CLKSEL2_PLL_IVA2), 0, 5, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL_IVA2), 0, 5, dp->m2);
/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
- sr32(CM_REG(CLKSEL1_PLL_IVA2), 8, 11, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 8, 11, dp->m);
/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
- sr32(CM_REG(CLKSEL1_PLL_IVA2), 0, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 0, 7, dp->n);
/* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
- sr32(CM_REG(CLKEN_PLL_IVA2), 4, 4, dp->fsel);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 4, 4, dp->fsel);
/* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
- sr32(CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_LOCK);
- wait_on_value((0x1 << 0), 1, CM_REG(IDLEST_PLL_IVA2), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_LOCK);
+ wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
}
/* FIXME: All values correspond to 26MHz only */
@@ -404,37 +404,37 @@ static void init_core_dpll_36x(u32 cpu_rev, u32 clk_sel)
dp += clk_sel;
if (running_in_sram()) {
- sr32(CM_REG(CLKEN_PLL), 0, 3, PLL_FAST_RELOCK_BYPASS);
- wait_on_value((0x1 << 0), 0, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_FAST_RELOCK_BYPASS);
+ wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
/* CM_CLKSEL1_EMU[DIV_DPLL3] */
- sr32(CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2);
+ sr32(OMAP3_CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2);
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
- sr32(CM_REG(CLKSEL1_PLL), 27, 5, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 27, 5, dp->m2);
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
- sr32(CM_REG(CLKSEL1_PLL), 16, 11, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 16, 11, dp->m);
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
- sr32(CM_REG(CLKSEL1_PLL), 8, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 8, 7, dp->n);
/* Set source CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
- sr32(CM_REG(CLKSEL1_PLL), 6, 1, 0);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL), 6, 1, 0);
- sr32(CM_REG(CLKSEL_CORE), 8, 4, CORE_SSI_DIV);
- sr32(CM_REG(CLKSEL_CORE), 4, 2, CORE_FUSB_DIV);
- sr32(CM_REG(CLKSEL_CORE), 2, 2, CORE_L4_DIV);
- sr32(CM_REG(CLKSEL_CORE), 0, 2, CORE_L3_DIV);
- sr32(CM_REG(CLKSEL_GFX), 0, 3, GFX_DIV_36X);
- sr32(CM_REG(CLKSEL_WKUP), 1, 2, WKUP_RSM);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 8, 4, CORE_SSI_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 4, 2, CORE_FUSB_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 2, 2, CORE_L4_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 0, 2, CORE_L3_DIV);
+ sr32(OMAP3_CM_REG(CLKSEL_GFX), 0, 3, GFX_DIV_36X);
+ sr32(OMAP3_CM_REG(CLKSEL_WKUP), 1, 2, WKUP_RSM);
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
- sr32(CM_REG(CLKEN_PLL), 4, 4, dp->fsel);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 4, 4, dp->fsel);
/* Lock Mode */
- sr32(CM_REG(CLKEN_PLL), 0, 3, PLL_LOCK);
- wait_on_value((0x1 << 0), 1, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_LOCK);
+ wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
} else if (running_in_flash()) {
/***Oopps.. Wrong .config!! *****/
hang();
@@ -462,36 +462,36 @@ static void init_per_dpll_36x(u32 cpu_rev, u32 clk_sel)
dp += clk_sel;
- sr32(CM_REG(CLKEN_PLL), 16, 3, PLL_STOP);
- wait_on_value((0x1 << 1), 0, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_STOP);
+ wait_on_value((0x1 << 1), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
/* Set M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */
- sr32(CM_REG(CLKSEL1_EMU), 24, 6, dp->m6);
+ sr32(OMAP3_CM_REG(CLKSEL1_EMU), 24, 6, dp->m6);
/* Set M5 (CLKSEL_CAM): CM_CLKSEL_CAM[0:5] */
- sr32(CM_REG(CLKSEL_CAM), 0, 6, dp->m5);
+ sr32(OMAP3_CM_REG(CLKSEL_CAM), 0, 6, dp->m5);
/* Set M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */
- sr32(CM_REG(CLKSEL_DSS), 0, 6, dp->m4);
+ sr32(OMAP3_CM_REG(CLKSEL_DSS), 0, 6, dp->m4);
/* Set M3 (CLKSEL_DSS2): CM_CLKSEL_DSS[8:13] */
- sr32(CM_REG(CLKSEL_DSS), 8, 6, dp->m3);
+ sr32(OMAP3_CM_REG(CLKSEL_DSS), 8, 6, dp->m3);
/* Set M2: CM_CLKSEL3_PLL[0:4] */
- sr32(CM_REG(CLKSEL3_PLL), 0, 5, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL3_PLL), 0, 5, dp->m2);
/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */
- sr32(CM_REG(CLKSEL2_PLL), 8, 12, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL), 8, 12, dp->m);
/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
- sr32(CM_REG(CLKSEL2_PLL), 0, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL), 0, 7, dp->n);
/* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */
- sr32(CM_REG(CLKSEL_CORE), 12, 2, dp->m2div);
+ sr32(OMAP3_CM_REG(CLKSEL_CORE), 12, 2, dp->m2div);
/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
- sr32(CM_REG(CLKEN_PLL), 16, 3, PLL_LOCK);
- wait_on_value((0x1 << 1), 2, CM_REG(IDLEST_CKGEN), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_LOCK);
+ wait_on_value((0x1 << 1), 2, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
}
/* FIXME: All values correspond to 26MHz only */
@@ -516,16 +516,16 @@ static void init_mpu_dpll_36x(u32 cpu_rev, u32 clk_sel)
dp += clk_sel;
/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
- sr32(CM_REG(CLKSEL2_PLL_MPU), 0, 5, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL_MPU), 0, 5, dp->m2);
/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
- sr32(CM_REG(CLKSEL1_PLL_MPU), 8, 11, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 8, 11, dp->m);
/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
- sr32(CM_REG(CLKSEL1_PLL_MPU), 0, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 0, 7, dp->n);
/* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
- sr32(CM_REG(CLKEN_PLL_MPU), 4, 4, dp->fsel);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 4, 4, dp->fsel);
}
/* FIXME: All values correspond to 26MHz only */
@@ -550,24 +550,24 @@ static void init_iva_dpll_36x(u32 cpu_rev, u32 clk_sel)
dp += clk_sel;
/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
- sr32(CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_STOP);
- wait_on_value((0x1 << 0), 0, CM_REG(IDLEST_PLL_IVA2), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_STOP);
+ wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
- sr32(CM_REG(CLKSEL2_PLL_IVA2), 0, 5, dp->m2);
+ sr32(OMAP3_CM_REG(CLKSEL2_PLL_IVA2), 0, 5, dp->m2);
/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
- sr32(CM_REG(CLKSEL1_PLL_IVA2), 8, 11, dp->m);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 8, 11, dp->m);
/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
- sr32(CM_REG(CLKSEL1_PLL_IVA2), 0, 7, dp->n);
+ sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 0, 7, dp->n);
/* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
- sr32(CM_REG(CLKEN_PLL_IVA2), 4, 4, dp->fsel);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 4, 4, dp->fsel);
/* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
- sr32(CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_LOCK);
- wait_on_value((0x1 << 0), 1, CM_REG(IDLEST_PLL_IVA2), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_LOCK);
+ wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
}
/**
@@ -590,7 +590,7 @@ void prcm_init(void)
osc_clk = get_osc_clk_speed();
get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
/* set input crystal speed */
- sr32(PRM_REG(CLKSEL), 0, 3, sys_clkin_sel);
+ sr32(OMAP3_PRM_REG(CLKSEL), 0, 3, sys_clkin_sel);
/*
* OMAP3430:
@@ -602,19 +602,19 @@ void prcm_init(void)
*/
if ((cpu_type != CPU_3630) && (sys_clkin_sel > 2)) {
/* input clock divider */
- sr32(PRM_REG(CLKSRC_CTRL), 6, 2, 2);
+ sr32(OMAP3_PRM_REG(CLKSRC_CTRL), 6, 2, 2);
clk_index = sys_clkin_sel / 2;
} else {
/* input clock divider */
- sr32(PRM_REG(CLKSRC_CTRL), 6, 2, 1);
+ sr32(OMAP3_PRM_REG(CLKSRC_CTRL), 6, 2, 1);
clk_index = sys_clkin_sel;
}
/*
* Unlock the MPU PLL. Run slow while clocks are being configured.
*/
- sr32(CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOW_POWER_BYPASS);
- wait_on_value((0x1 << 0), 0, CM_REG(IDLEST_PLL_MPU), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOW_POWER_BYPASS);
+ wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_PLL_MPU), LDELAY);
if (cpu_type == CPU_3430) {
init_core_dpll_34x(cpu_rev, clk_index);
@@ -636,12 +636,12 @@ void prcm_init(void)
/*
* Clock configuration complete. Lock MPU PLL.
*/
- sr32(CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOCK);
- wait_on_value((0x1 << 0), 1, CM_REG(IDLEST_PLL_MPU), LDELAY);
+ sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOCK);
+ wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_PLL_MPU), LDELAY);
/* Set up GPTimers to sys_clk source only */
- sr32(CM_REG(CLKSEL_PER), 0, 8, 0xff);
- sr32(CM_REG(CLKSEL_WKUP), 0, 1, 1);
+ sr32(OMAP3_CM_REG(CLKSEL_PER), 0, 8, 0xff);
+ sr32(OMAP3_CM_REG(CLKSEL_WKUP), 0, 1, 1);
sdelay(5000);
@@ -663,11 +663,11 @@ void prcm_init(void)
static void per_clocks_enable(void)
{
/* Enable GP2 timer. */
- sr32(CM_REG(CLKSEL_PER), 0, 1, 0x1); /* GPT2 = sys clk */
- sr32(CM_REG(ICLKEN_PER), 3, 1, 0x1); /* ICKen GPT2 */
- sr32(CM_REG(FCLKEN_PER), 3, 1, 0x1); /* FCKen GPT2 */
+ sr32(OMAP3_CM_REG(CLKSEL_PER), 0, 1, 0x1); /* GPT2 = sys clk */
+ sr32(OMAP3_CM_REG(ICLKEN_PER), 3, 1, 0x1); /* ICKen GPT2 */
+ sr32(OMAP3_CM_REG(FCLKEN_PER), 3, 1, 0x1); /* FCKen GPT2 */
/* Enable the ICLK for 32K Sync Timer as its used in udelay */
- sr32(CM_REG(ICLKEN_WKUP), 2, 1, 0x1);
+ sr32(OMAP3_CM_REG(ICLKEN_WKUP), 2, 1, 0x1);
#define FCK_IVA2_ON 0x00000001
#define FCK_CORE1_ON 0x03fffe29
@@ -681,18 +681,18 @@ static void per_clocks_enable(void)
#define ICK_CAM_ON 0x00000001
#define FCK_PER_ON 0x0003ffff
#define ICK_PER_ON 0x0003ffff
- sr32(CM_REG(FCLKEN_IVA2), 0, 32, FCK_IVA2_ON);
- sr32(CM_REG(FCLKEN1_CORE), 0, 32, FCK_CORE1_ON);
- sr32(CM_REG(ICLKEN1_CORE), 0, 32, ICK_CORE1_ON);
- sr32(CM_REG(ICLKEN2_CORE), 0, 32, ICK_CORE2_ON);
- sr32(CM_REG(FCLKEN_WKUP), 0, 32, FCK_WKUP_ON);
- sr32(CM_REG(ICLKEN_WKUP), 0, 32, ICK_WKUP_ON);
- sr32(CM_REG(FCLKEN_DSS), 0, 32, FCK_DSS_ON);
- sr32(CM_REG(ICLKEN_DSS), 0, 32, ICK_DSS_ON);
- sr32(CM_REG(FCLKEN_CAM), 0, 32, FCK_CAM_ON);
- sr32(CM_REG(ICLKEN_CAM), 0, 32, ICK_CAM_ON);
- sr32(CM_REG(FCLKEN_PER), 0, 32, FCK_PER_ON);
- sr32(CM_REG(ICLKEN_PER), 0, 32, ICK_PER_ON);
+ sr32(OMAP3_CM_REG(FCLKEN_IVA2), 0, 32, FCK_IVA2_ON);
+ sr32(OMAP3_CM_REG(FCLKEN1_CORE), 0, 32, FCK_CORE1_ON);
+ sr32(OMAP3_CM_REG(ICLKEN1_CORE), 0, 32, ICK_CORE1_ON);
+ sr32(OMAP3_CM_REG(ICLKEN2_CORE), 0, 32, ICK_CORE2_ON);
+ sr32(OMAP3_CM_REG(FCLKEN_WKUP), 0, 32, FCK_WKUP_ON);
+ sr32(OMAP3_CM_REG(ICLKEN_WKUP), 0, 32, ICK_WKUP_ON);
+ sr32(OMAP3_CM_REG(FCLKEN_DSS), 0, 32, FCK_DSS_ON);
+ sr32(OMAP3_CM_REG(ICLKEN_DSS), 0, 32, ICK_DSS_ON);
+ sr32(OMAP3_CM_REG(FCLKEN_CAM), 0, 32, FCK_CAM_ON);
+ sr32(OMAP3_CM_REG(ICLKEN_CAM), 0, 32, ICK_CAM_ON);
+ sr32(OMAP3_CM_REG(FCLKEN_PER), 0, 32, FCK_PER_ON);
+ sr32(OMAP3_CM_REG(ICLKEN_PER), 0, 32, ICK_PER_ON);
/* Settle down my friend */
sdelay(1000);
diff --git a/arch/arm/mach-omap/omap3_generic.c b/arch/arm/mach-omap/omap3_generic.c
index a209129..8487f07 100644
--- a/arch/arm/mach-omap/omap3_generic.c
+++ b/arch/arm/mach-omap/omap3_generic.c
@@ -53,7 +53,7 @@
*/
void __noreturn reset_cpu(unsigned long addr)
{
- writel(OMAP3_PRM_RSTCTRL_RESET, PRM_REG(RSTCTRL));
+ writel(OMAP3_PRM_RSTCTRL_RESET, OMAP3_PRM_REG(RSTCTRL));
while (1);
}
@@ -69,7 +69,7 @@ u32 get_cpu_type(void)
u32 idcode_val;
u16 hawkeye;
- idcode_val = readl(IDCODE_REG);
+ idcode_val = readl(OMAP3_IDCODE_REG);
hawkeye = get_hawkeye(idcode_val);
@@ -98,7 +98,7 @@ u32 get_cpu_rev(void)
u32 idcode_val;
u32 version, retval;
- idcode_val = readl(IDCODE_REG);
+ idcode_val = readl(OMAP3_IDCODE_REG);
version = get_version(idcode_val);
@@ -167,7 +167,7 @@ u32 get_sdr_cs_size(u32 offset)
{
u32 size;
/* get ram size field */
- size = readl(SDRC_REG(MCFG_0) + offset) >> 8;
+ size = readl(OMAP3_SDRC_REG(MCFG_0) + offset) >> 8;
size &= 0x3FF; /* remove unwanted bits */
size *= 2 * (1024 * 1024); /* find size in MB */
return size;
@@ -183,7 +183,7 @@ u32 get_sdr_cs1_base(void)
u32 base;
u32 cs_cfg;
- cs_cfg = readl(SDRC_REG(CS_CFG));
+ cs_cfg = readl(OMAP3_SDRC_REG(CS_CFG));
/* get ram size field */
base = (cs_cfg & 0x0000000F) << 2; /* get CS1STARTHIGH */
base = base | ((cs_cfg & 0x00000300) >> 8); /* get CS1STARTLOW */
@@ -201,7 +201,7 @@ EXPORT_SYMBOL(get_sdr_cs1_base);
*/
inline u32 get_sysboot_value(void)
{
- return (0x0000003F & readl(CONTROL_REG(STATUS)));
+ return (0x0000003F & readl(OMAP3_CONTROL_REG(STATUS)));
}
/**
@@ -290,7 +290,7 @@ u32 get_boot_type(void)
u32 get_device_type(void)
{
int mode;
- mode = readl(CONTROL_REG(STATUS)) & (DEVICE_MASK);
+ mode = readl(OMAP3_CONTROL_REG(STATUS)) & (DEVICE_MASK);
return (mode >>= 8);
}
@@ -375,17 +375,17 @@ static void watchdog_init(void)
{
int pending = 1;
- sr32(CM_REG(FCLKEN_WKUP), 5, 1, 1);
- sr32(CM_REG(ICLKEN_WKUP), 5, 1, 1);
- wait_on_value((0x1 << 5), 0x20, CM_REG(IDLEST_WKUP), 5);
+ sr32(OMAP3_CM_REG(FCLKEN_WKUP), 5, 1, 1);
+ sr32(OMAP3_CM_REG(ICLKEN_WKUP), 5, 1, 1);
+ wait_on_value((0x1 << 5), 0x20, OMAP3_CM_REG(IDLEST_WKUP), 5);
- writel(WDT_DISABLE_CODE1, WDT_REG(WSPR));
+ writel(WDT_DISABLE_CODE1, OMAP3_WDT_REG(WSPR));
do {
- pending = readl(WDT_REG(WWPS));
+ pending = readl(OMAP3_WDT_REG(WWPS));
} while (pending);
- writel(WDT_DISABLE_CODE2, WDT_REG(WSPR));
+ writel(WDT_DISABLE_CODE2, OMAP3_WDT_REG(WSPR));
}
/**
@@ -494,17 +494,17 @@ const struct gpmc_config omap3_nand_cfg = {
#ifndef __PBL__
static int omap3_gpio_init(void)
{
- add_generic_device("omap-gpio", 0, NULL, OMAP_GPIO1_BASE,
+ add_generic_device("omap-gpio", 0, NULL, OMAP3_GPIO1_BASE,
0xf00, IORESOURCE_MEM, NULL);
- add_generic_device("omap-gpio", 1, NULL, OMAP_GPIO2_BASE,
+ add_generic_device("omap-gpio", 1, NULL, OMAP3_GPIO2_BASE,
0xf00, IORESOURCE_MEM, NULL);
- add_generic_device("omap-gpio", 2, NULL, OMAP_GPIO3_BASE,
+ add_generic_device("omap-gpio", 2, NULL, OMAP3_GPIO3_BASE,
0xf00, IORESOURCE_MEM, NULL);
- add_generic_device("omap-gpio", 3, NULL, OMAP_GPIO4_BASE,
+ add_generic_device("omap-gpio", 3, NULL, OMAP3_GPIO4_BASE,
0xf00, IORESOURCE_MEM, NULL);
- add_generic_device("omap-gpio", 4, NULL, OMAP_GPIO5_BASE,
+ add_generic_device("omap-gpio", 4, NULL, OMAP3_GPIO5_BASE,
0xf00, IORESOURCE_MEM, NULL);
- add_generic_device("omap-gpio", 5, NULL, OMAP_GPIO6_BASE,
+ add_generic_device("omap-gpio", 5, NULL, OMAP3_GPIO6_BASE,
0xf00, IORESOURCE_MEM, NULL);
return 0;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index e2ce65f..fc5a54f 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -30,37 +30,37 @@ void omap_usb_utmi_init(struct omap_hcd *omap, u8 tll_channel_mask)
/* Program the 3 TLL channels upfront */
for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
- reg = __raw_readl(OMAP_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
+ reg = __raw_readl(OMAP3_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
/* Disable AutoIdle, BitStuffing and use SDR Mode */
reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
- __raw_writel(reg, OMAP_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
+ __raw_writel(reg, OMAP3_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
}
/* Program Common TLL register */
- reg = __raw_readl(OMAP_USBTLL_BASE + OMAP_TLL_SHARED_CONF);
+ reg = __raw_readl(OMAP3_USBTLL_BASE + OMAP_TLL_SHARED_CONF);
reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
| OMAP_TLL_SHARED_CONF_USB_DIVRATION
| OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN);
reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
- __raw_writel(reg, OMAP_USBTLL_BASE + OMAP_TLL_SHARED_CONF);
+ __raw_writel(reg, OMAP3_USBTLL_BASE + OMAP_TLL_SHARED_CONF);
/* Enable channels now */
for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
- reg = __raw_readl(OMAP_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
+ reg = __raw_readl(OMAP3_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
/* Enable only the reg that is needed */
if (!(tll_channel_mask & 1<<i))
continue;
reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
- __raw_writel(reg, OMAP_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
+ __raw_writel(reg, OMAP3_USBTLL_BASE + OMAP_TLL_CHANNEL_CONF(i));
__raw_writeb(0xbe,
- OMAP_USBTLL_BASE + OMAP_TLL_ULPI_SCRATCH_REGISTER(i));
+ OMAP3_USBTLL_BASE + OMAP_TLL_ULPI_SCRATCH_REGISTER(i));
}
}
@@ -78,56 +78,56 @@ int ehci_omap_init(struct omap_hcd *omap)
}
- v = __raw_readl(CM_REG(CLKSEL4_PLL));
+ v = __raw_readl(OMAP3_CM_REG(CLKSEL4_PLL));
v |= (12 << OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT);
v |= (120 << OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT);
- __raw_writel(v, CM_REG(CLKSEL4_PLL));
+ __raw_writel(v, OMAP3_CM_REG(CLKSEL4_PLL));
- v = __raw_readl(CM_REG(CLKSEL5_PLL));
+ v = __raw_readl(OMAP3_CM_REG(CLKSEL5_PLL));
v |= (1 << OMAP3430ES2_DIV_120M_SHIFT);
- __raw_writel(v, CM_REG(CLKSEL5_PLL));
+ __raw_writel(v, OMAP3_CM_REG(CLKSEL5_PLL));
- v = __raw_readl(CM_REG(CLKEN2_PLL));
+ v = __raw_readl(OMAP3_CM_REG(CLKEN2_PLL));
v |= (7 << OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT);
v |= (7 << OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT);
- __raw_writel(v, CM_REG(CLKEN2_PLL));
+ __raw_writel(v, OMAP3_CM_REG(CLKEN2_PLL));
/* PRCM settings for USBHOST:
* Interface clk un-related to domain transition
*/
- v = __raw_readl(CM_REG(AIDLE_USBH));
+ v = __raw_readl(OMAP3_CM_REG(AIDLE_USBH));
v |= (0 << OMAP3430ES2_AUTO_USBHOST_SHIFT);
- __raw_writel(v, CM_REG(AIDLE_USBH));
+ __raw_writel(v, OMAP3_CM_REG(AIDLE_USBH));
/* Disable sleep dependency with MPU and IVA */
- v = __raw_readl(CM_REG(SLEEPD_USBH));
+ v = __raw_readl(OMAP3_CM_REG(SLEEPD_USBH));
v |= (0 << OMAP3430ES2_EN_MPU_SHIFT);
v |= (0 << OMAP3430ES2_EN_IVA2_SHIFT);
- __raw_writel(v, CM_REG(SLEEPD_USBH));
+ __raw_writel(v, OMAP3_CM_REG(SLEEPD_USBH));
/* Disable Automatic transition of clock */
- v = __raw_readl(CM_REG(CLKSTCTRL_USBH));
+ v = __raw_readl(OMAP3_CM_REG(CLKSTCTRL_USBH));
v |= (0 << OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT);
- __raw_writel(v, CM_REG(CLKSTCTRL_USBH));
+ __raw_writel(v, OMAP3_CM_REG(CLKSTCTRL_USBH));
/* Enable Clocks for USBHOST */
/* enable usbhost_ick */
- v = __raw_readl(CM_REG(ICLKEN_USBH));
+ v = __raw_readl(OMAP3_CM_REG(ICLKEN_USBH));
v |= (1 << OMAP3430ES2_EN_USBHOST_SHIFT);
- __raw_writel(v, CM_REG(ICLKEN_USBH));
+ __raw_writel(v, OMAP3_CM_REG(ICLKEN_USBH));
/* enable usbhost_120m_fck */
- v = __raw_readl(CM_REG(FCLKEN_USBH));
+ v = __raw_readl(OMAP3_CM_REG(FCLKEN_USBH));
v |= (1 << OMAP3430ES2_EN_USBHOST2_SHIFT);
- __raw_writel(v, CM_REG(FCLKEN_USBH));
+ __raw_writel(v, OMAP3_CM_REG(FCLKEN_USBH));
/* enable usbhost_48m_fck */
- v = __raw_readl(CM_REG(FCLKEN_USBH));
+ v = __raw_readl(OMAP3_CM_REG(FCLKEN_USBH));
v |= (1 << OMAP3430ES2_EN_USBHOST1_SHIFT);
- __raw_writel(v, CM_REG(FCLKEN_USBH));
+ __raw_writel(v, OMAP3_CM_REG(FCLKEN_USBH));
if (omap->phy_reset) {
/* Refer: ISSUE1 */
@@ -144,28 +144,28 @@ int ehci_omap_init(struct omap_hcd *omap)
}
/* enable usbtll_fck */
- v = __raw_readl(CM_REG(FCLKEN3_CORE));
+ v = __raw_readl(OMAP3_CM_REG(FCLKEN3_CORE));
v |= (1 << OMAP3430ES2_EN_USBTLL_SHIFT);
- __raw_writel(v, CM_REG(FCLKEN3_CORE));
+ __raw_writel(v, OMAP3_CM_REG(FCLKEN3_CORE));
/* Configure TLL for 60Mhz clk for ULPI */
/* enable usbtll_ick */
- v = __raw_readl(CM_REG(ICLKEN3_CORE));
+ v = __raw_readl(OMAP3_CM_REG(ICLKEN3_CORE));
v |= (1 << OMAP3430ES2_EN_USBTLL_SHIFT);
- __raw_writel(v, CM_REG(ICLKEN3_CORE));
+ __raw_writel(v, OMAP3_CM_REG(ICLKEN3_CORE));
- v = __raw_readl(CM_REG(AIDLE3_CORE));
+ v = __raw_readl(OMAP3_CM_REG(AIDLE3_CORE));
v |= (0 << OMAP3430ES2_AUTO_USBTLL_SHIFT);
- __raw_writel(v, CM_REG(AIDLE3_CORE));
+ __raw_writel(v, OMAP3_CM_REG(AIDLE3_CORE));
/* perform TLL soft reset, and wait until reset is complete */
__raw_writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET,
- OMAP_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
+ OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
/* Wait for TLL reset to complete */
start = get_time_ns();
- while (!(__raw_readl(OMAP_USBTLL_BASE + OMAP_USBTLL_SYSSTATUS)
+ while (!(__raw_readl(OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSSTATUS)
& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
if (is_timeout(start, timeout * USECOND)) {
return -ETIMEDOUT;
@@ -175,18 +175,18 @@ int ehci_omap_init(struct omap_hcd *omap)
/* (1<<3) = no idle mode only for initial debugging */
__raw_writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
- OMAP_USBTLL_SYSCONFIG_CACTIVITY, OMAP_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
+ OMAP_USBTLL_SYSCONFIG_CACTIVITY, OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
/* Put UHH in NoIdle/NoStandby mode */
- v = __raw_readl(OMAP_UHH_CONFIG_BASE + OMAP_UHH_SYSCONFIG);
+ v = __raw_readl(OMAP3_UHH_CONFIG_BASE + OMAP_UHH_SYSCONFIG);
v |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
| OMAP_UHH_SYSCONFIG_SIDLEMODE
| OMAP_UHH_SYSCONFIG_CACTIVITY
| OMAP_UHH_SYSCONFIG_MIDLEMODE);
v &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
- __raw_writel(v, OMAP_UHH_CONFIG_BASE + OMAP_UHH_SYSCONFIG);
+ __raw_writel(v, OMAP3_UHH_CONFIG_BASE + OMAP_UHH_SYSCONFIG);
- v = __raw_readl(OMAP_UHH_CONFIG_BASE + OMAP_UHH_HOSTCONFIG);
+ v = __raw_readl(OMAP3_UHH_CONFIG_BASE + OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
v |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
@@ -225,7 +225,7 @@ int ehci_omap_init(struct omap_hcd *omap)
v |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
}
- __raw_writel(v, OMAP_UHH_CONFIG_BASE + OMAP_UHH_HOSTCONFIG);
+ __raw_writel(v, OMAP3_UHH_CONFIG_BASE + OMAP_UHH_HOSTCONFIG);
if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 16/19] ARM OMAP AM33XX: create new ARCH for AM33xx
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (14 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 15/19] ARM omap3: Add change OMAP_ prefix to OMAP3_ for registers Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 17/19] arm: omap: am33xx: add support for low level debug Jan Luebbe
` (2 subsequent siblings)
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
From: Teresa Gámez <t.gamez@phytec.de>
Created ARCH for AM33xx boards as second stage bootloader.
This includes:
- Added dmtimer0
- Created basic header files
- Added MMC support for ARCH_AM33XX
- Added reset function
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Some header file cleanup by:
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/Kconfig | 11 +++
arch/arm/mach-omap/Makefile | 2 +
arch/arm/mach-omap/am33xx_generic.c | 29 +++++++
arch/arm/mach-omap/dmtimer0.c | 89 ++++++++++++++++++++++
arch/arm/mach-omap/include/mach/am33xx-clock.h | 23 ++++++
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 49 ++++++++++++
drivers/mci/Kconfig | 2 +-
7 files changed, 204 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-omap/am33xx_generic.c
create mode 100644 arch/arm/mach-omap/dmtimer0.c
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-clock.h
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-silicon.h
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 451783e..b94500a 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -42,12 +42,23 @@ config ARCH_OMAP4
help
Say Y here if you are using Texas Instrument's OMAP4 based platform
+config ARCH_AM33XX
+ bool "AM33xx"
+ select CPU_V7
+ select GENERIC_GPIO
+ select OMAP_CLOCK_SOURCE_DMTIMER0
+ help
+ Say Y here if you are using Texas Instrument's AM33xx based platform
+
endchoice
# Blind enable all possible clocks.. think twice before you do this.
config OMAP_CLOCK_SOURCE_S32K
bool
+config OMAP_CLOCK_SOURCE_DMTIMER0
+ bool
+
config OMAP3_CLOCK_CONFIG
prompt "Clock Configuration"
bool
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
index b7a5e4a..48a951b 100644
--- a/arch/arm/mach-omap/Makefile
+++ b/arch/arm/mach-omap/Makefile
@@ -18,10 +18,12 @@
obj-$(CONFIG_ARCH_OMAP) += syslib.o omap_devices.o
pbl-$(CONFIG_ARCH_OMAP) += syslib.o
obj-$(CONFIG_OMAP_CLOCK_SOURCE_S32K) += s32k_clksource.o
+obj-$(CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0) += dmtimer0.o
obj-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o auxcr.o
pbl-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o auxcr.o
obj-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
pbl-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
+obj-$(CONFIG_ARCH_AM33XX) += am33xx_generic.o
obj-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
pbl-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
obj-$(CONFIG_OMAP_GPMC) += gpmc.o devices-gpmc-nand.o
diff --git a/arch/arm/mach-omap/am33xx_generic.c b/arch/arm/mach-omap/am33xx_generic.c
new file mode 100644
index 0000000..f73f946
--- /dev/null
+++ b/arch/arm/mach-omap/am33xx_generic.c
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2012 Teresa Gámez, Phytec Messtechnik GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <io.h>
+#include <mach/am33xx-silicon.h>
+#include <mach/am33xx-clock.h>
+
+void __noreturn reset_cpu(unsigned long addr)
+{
+ writel(AM33XX_PRM_RSTCTRL_RESET, AM33XX_PRM_RSTCTRL);
+
+ while (1);
+}
diff --git a/arch/arm/mach-omap/dmtimer0.c b/arch/arm/mach-omap/dmtimer0.c
new file mode 100644
index 0000000..b0bd670
--- /dev/null
+++ b/arch/arm/mach-omap/dmtimer0.c
@@ -0,0 +1,89 @@
+/**
+ * @file
+ * @brief Support DMTimer0 counter
+ *
+ * FileName: arch/arm/mach-omap/dmtimer0.c
+ */
+/*
+ * This File is based on arch/arm/mach-omap/s32k_clksource.c
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Nishanth Menon <x0nishan@ti.com>
+ *
+ * (C) Copyright 2012 Teresa Gámez, Phytec Messtechnik GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <clock.h>
+#include <init.h>
+#include <io.h>
+#include <mach/am33xx-silicon.h>
+
+#define CLK_RC32K 32768
+
+#define TIDR 0x0
+#define TIOCP_CFG 0x10
+#define IRQ_EOI 0x20
+#define IRQSTATUS_RAW 0x24
+#define IRQSTATUS 0x28
+#define IRQSTATUS_SET 0x2c
+#define IRQSTATUS_CLR 0x30
+#define IRQWAKEEN 0x34
+#define TCLR 0x38
+#define TCRR 0x3C
+#define TLDR 0x40
+#define TTGR 0x44
+#define TWPS 0x48
+#define TMAR 0x4C
+#define TCAR1 0x50
+#define TSICR 0x54
+#define TCAR2 0x58
+
+/**
+ * @brief Provide a simple counter read
+ *
+ * @return DMTimer0 counter
+ */
+static uint64_t dmtimer0_read(void)
+{
+ return readl(AM33XX_DMTIMER0_BASE + TCRR);
+}
+
+static struct clocksource dmtimer0_cs = {
+ .read = dmtimer0_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 10,
+};
+
+/**
+ * @brief Initialize the Clock
+ *
+ * Enable dmtimer0.
+ *
+ * @return result of @ref init_clock
+ */
+static int dmtimer0_init(void)
+{
+ dmtimer0_cs.mult = clocksource_hz2mult(CLK_RC32K, dmtimer0_cs.shift);
+ /* Enable counter */
+ writel(0x3, AM33XX_DMTIMER0_BASE + TCLR);
+
+ return init_clock(&dmtimer0_cs);
+}
+
+/* Run me at boot time */
+core_initcall(dmtimer0_init);
diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
new file mode 100644
index 0000000..6845412
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
@@ -0,0 +1,23 @@
+/*
+ * (C) Copyright 2012 Teresa Gámez, Phytec Messtechnik GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _AM33XX_CLOCKS_H_
+#define _AM33XX_CLOCKS_H_
+
+
+#endif /* endif _AM33XX_CLOCKS_H_ */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
new file mode 100644
index 0000000..090489c
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -0,0 +1,49 @@
+/*
+ * This file contains the address info for various AM33XX modules.
+ *
+ * Copyright (C) 2012 Teresa Gámez <t.gamez@phytec.de>,
+ * Phytec Messtechnik GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_AM33XX_H
+#define __ASM_ARCH_AM33XX_H
+
+/** AM335x Internal Bus Base addresses */
+#define AM33XX_L4_WKUP_BASE 0x44C00000
+#define AM33XX_L4_PER_BASE 0x48000000
+#define AM33XX_L4_FAST_BASE 0x4A000000
+
+/* UART */
+#define AM33XX_UART0_BASE (AM33XX_L4_WKUP_BASE + 0x209000)
+#define AM33XX_UART1_BASE (AM33XX_L4_PER_BASE + 0x22000)
+#define AM33XX_UART2_BASE (AM33XX_L4_PER_BASE + 0x24000)
+
+/* EMFI Registers */
+#define AM33XX_EMFI0_BASE 0x4C000000
+
+#define AM33XX_DRAM_ADDR_SPACE_START 0x80000000
+#define AM33XX_DRAM_ADDR_SPACE_END 0xC0000000
+
+/* GPMC */
+#define AM33XX_GPMC_BASE 0x50000000
+
+/* MMC */
+#define AM33XX_MMCHS0_BASE (AM33XX_L4_PER_BASE + 0x60000)
+
+/* DTMTimer0 */
+#define AM33XX_DMTIMER0_BASE (AM33XX_L4_WKUP_BASE + 0x205000)
+
+/* PRM */
+#define AM33XX_PRM_BASE (AM33XX_L4_WKUP_BASE + 0x200000)
+
+
+#endif
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 6876117..9558f28 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -67,7 +67,7 @@ config MCI_IMX_ESDHC_PIO
config MCI_OMAP_HSMMC
bool "OMAP HSMMC"
- depends on ARCH_OMAP4 || ARCH_OMAP3
+ depends on ARCH_OMAP4 || ARCH_OMAP3 || ARCH_AM33XX
help
Enable this entry to add support to read and write SD cards on
both OMAP3 and OMAP4 based systems.
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 17/19] arm: omap: am33xx: add support for low level debug
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (15 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 16/19] ARM OMAP AM33XX: create new ARCH for AM33xx Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-18 14:22 ` [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board Jan Luebbe
2012-12-18 14:22 ` [PATCH 19/19] drivers: net: add driver for TI CPSW Jan Luebbe
18 siblings, 0 replies; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/include/mach/debug_ll.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/mach-omap/include/mach/debug_ll.h b/arch/arm/mach-omap/include/mach/debug_ll.h
index b2714c5..142f01a 100644
--- a/arch/arm/mach-omap/include/mach/debug_ll.h
+++ b/arch/arm/mach-omap/include/mach/debug_ll.h
@@ -35,6 +35,11 @@
#define UART_BASE OMAP44XX_UART3_BASE
#endif
+#ifdef CONFIG_ARCH_AM33XX
+#include <mach/am33xx-silicon.h>
+#define UART_BASE AM33XX_UART0_BASE
+#endif
+
#define LSR_THRE 0x20 /* Xmit holding register empty */
#define LSR (5 << 2)
#define THR (0 << 2)
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (16 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 17/19] arm: omap: am33xx: add support for low level debug Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-19 12:07 ` Teresa Gámez
2012-12-18 14:22 ` [PATCH 19/19] drivers: net: add driver for TI CPSW Jan Luebbe
18 siblings, 1 reply; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/Makefile | 1 +
arch/arm/boards/beaglebone/Makefile | 1 +
arch/arm/boards/beaglebone/board.c | 358 ++++++++++++++
arch/arm/boards/beaglebone/config.h | 17 +
arch/arm/boards/beaglebone/env/boot/sd | 11 +
arch/arm/boards/beaglebone/env/config | 21 +
arch/arm/configs/am335x_beaglebone_defconfig | 54 +++
.../configs/am335x_beaglebone_mlo_large_defconfig | 55 +++
.../configs/am335x_beaglebone_mlo_small_defconfig | 31 ++
arch/arm/mach-omap/Kconfig | 11 +-
arch/arm/mach-omap/Makefile | 2 +-
arch/arm/mach-omap/am33xx_clock.c | 289 +++++++++++
arch/arm/mach-omap/am33xx_generic.c | 68 +++
arch/arm/mach-omap/am33xx_mux.c | 506 ++++++++++++++++++++
arch/arm/mach-omap/gpmc.c | 3 +
arch/arm/mach-omap/include/mach/am33xx-clock.h | 171 +++++++
arch/arm/mach-omap/include/mach/am33xx-devices.h | 32 ++
arch/arm/mach-omap/include/mach/am33xx-mux.h | 22 +
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 115 +++++
arch/arm/mach-omap/include/mach/wdt.h | 2 +
arch/arm/mach-omap/include/mach/xload.h | 1 +
arch/arm/mach-omap/xload.c | 2 +
22 files changed, 1771 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boards/beaglebone/Makefile
create mode 100644 arch/arm/boards/beaglebone/board.c
create mode 100644 arch/arm/boards/beaglebone/config.h
create mode 100644 arch/arm/boards/beaglebone/env/boot/sd
create mode 100644 arch/arm/boards/beaglebone/env/config
create mode 100644 arch/arm/configs/am335x_beaglebone_defconfig
create mode 100644 arch/arm/configs/am335x_beaglebone_mlo_large_defconfig
create mode 100644 arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
create mode 100644 arch/arm/mach-omap/am33xx_clock.c
create mode 100644 arch/arm/mach-omap/am33xx_mux.c
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-devices.h
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-mux.h
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3bd645f..5082a13 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -103,6 +103,7 @@ board-$(CONFIG_MACH_NOMADIK_8815NHK) := nhk8815
board-$(CONFIG_MACH_NXDB500) := netx
board-$(CONFIG_MACH_OMAP343xSDP) := omap343xdsp
board-$(CONFIG_MACH_BEAGLE) := beagle
+board-$(CONFIG_MACH_BEAGLEBONE) := beaglebone
board-$(CONFIG_MACH_OMAP3EVM) := omap3evm
board-$(CONFIG_MACH_PANDA) := panda
board-$(CONFIG_MACH_ARCHOSG9) := archosg9
diff --git a/arch/arm/boards/beaglebone/Makefile b/arch/arm/boards/beaglebone/Makefile
new file mode 100644
index 0000000..dcfc293
--- /dev/null
+++ b/arch/arm/boards/beaglebone/Makefile
@@ -0,0 +1 @@
+obj-y += board.o
diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
new file mode 100644
index 0000000..d139e94
--- /dev/null
+++ b/arch/arm/boards/beaglebone/board.c
@@ -0,0 +1,358 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Raghavendra KH <r-khandenahally@ti.com>
+ *
+ * Copyright (C) 2012 Jan Luebbe <j.luebbe@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ * @brief BeagleBone Specific Board Initialization routines
+ */
+
+#include <common.h>
+#include <console.h>
+#include <init.h>
+#include <driver.h>
+#include <fs.h>
+#include <linux/stat.h>
+#include <environment.h>
+#include <sizes.h>
+#include <io.h>
+#include <ns16550.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <mach/am33xx-silicon.h>
+#include <mach/am33xx-clock.h>
+#include <mach/sdrc.h>
+#include <mach/sys_info.h>
+#include <mach/syslib.h>
+#include <mach/gpmc.h>
+#include <mach/ehci.h>
+#include <i2c/i2c.h>
+#include <linux/err.h>
+#include <usb/ehci.h>
+#include <mach/xload.h>
+#include <mach/am33xx-devices.h>
+#include <mach/am33xx-mux.h>
+#include <mach/cpsw.h>
+#include <mach/wdt.h>
+
+/* UART Defines */
+#define UART_SYSCFG_OFFSET (0x54)
+#define UART_SYSSTS_OFFSET (0x58)
+
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+/* AM335X EMIF Register values */
+#define EMIF_SDMGT 0x80000000
+#define EMIF_SDRAM 0x00004650
+#define EMIF_PHYCFG 0x2
+#define DDR_PHY_RESET (0x1 << 10)
+#define DDR_FUNCTIONAL_MODE_EN 0x1
+#define DDR_PHY_READY (0x1 << 2)
+#define VTP_CTRL_READY (0x1 << 5)
+#define VTP_CTRL_ENABLE (0x1 << 6)
+#define VTP_CTRL_LOCK_EN (0x1 << 4)
+#define VTP_CTRL_START_EN (0x1)
+#define DDR2_RATIO 0x80 /* for mDDR */
+#define CMD_FORCE 0x00 /* common #def */
+#define CMD_DELAY 0x00
+
+#define EMIF_READ_LATENCY 0x05
+#define EMIF_TIM1 0x0666B3D6
+#define EMIF_TIM2 0x143731DA
+#define EMIF_TIM3 0x00000347
+#define EMIF_SDCFG 0x43805332
+#define EMIF_SDREF 0x0000081a
+#define DDR2_DLL_LOCK_DIFF 0x0
+#define DDR2_RD_DQS 0x12
+#define DDR2_PHY_FIFO_WE 0x80
+
+#define DDR2_INVERT_CLKOUT 0x00
+#define DDR2_WR_DQS 0x00
+#define DDR2_PHY_WRLVL 0x00
+#define DDR2_PHY_GATELVL 0x00
+#define DDR2_PHY_WR_DATA 0x40
+#define PHY_RANK0_DELAY 0x01
+#define PHY_DLL_LOCK_DIFF 0x0
+#define DDR_IOCTRL_VALUE 0x18B
+
+static void beaglebone_data_macro_config(int dataMacroNum)
+{
+ u32 BaseAddrOffset = 0x00;;
+
+ if (dataMacroNum == 1)
+ BaseAddrOffset = 0xA4;
+
+ __raw_writel(((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
+ |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)),
+ (AM33XX_DATA0_RD_DQS_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_RD_DQS>>2,
+ (AM33XX_DATA0_RD_DQS_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
+ |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)),
+ (AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_WR_DQS>>2,
+ (AM33XX_DATA0_WR_DQS_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
+ |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)),
+ (AM33XX_DATA0_WRLVL_INIT_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_WRLVL>>2,
+ (AM33XX_DATA0_WRLVL_INIT_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
+ |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)),
+ (AM33XX_DATA0_GATELVL_INIT_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_GATELVL>>2,
+ (AM33XX_DATA0_GATELVL_INIT_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
+ |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
+ (AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_FIFO_WE>>2,
+ (AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
+ |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
+ (AM33XX_DATA0_WR_DATA_SLAVE_RATIO_0 + BaseAddrOffset));
+ __raw_writel(DDR2_PHY_WR_DATA>>2,
+ (AM33XX_DATA0_WR_DATA_SLAVE_RATIO_1 + BaseAddrOffset));
+ __raw_writel(PHY_DLL_LOCK_DIFF,
+ (AM33XX_DATA0_DLL_LOCK_DIFF_0 + BaseAddrOffset));
+}
+
+static void beaglebone_cmd_macro_config(void)
+{
+ __raw_writel(DDR2_RATIO, AM33XX_CMD0_CTRL_SLAVE_RATIO_0);
+ __raw_writel(CMD_FORCE, AM33XX_CMD0_CTRL_SLAVE_FORCE_0);
+ __raw_writel(CMD_DELAY, AM33XX_CMD0_CTRL_SLAVE_DELAY_0);
+ __raw_writel(DDR2_DLL_LOCK_DIFF, AM33XX_CMD0_DLL_LOCK_DIFF_0);
+ __raw_writel(DDR2_INVERT_CLKOUT, AM33XX_CMD0_INVERT_CLKOUT_0);
+
+ __raw_writel(DDR2_RATIO, AM33XX_CMD1_CTRL_SLAVE_RATIO_0);
+ __raw_writel(CMD_FORCE, AM33XX_CMD1_CTRL_SLAVE_FORCE_0);
+ __raw_writel(CMD_DELAY, AM33XX_CMD1_CTRL_SLAVE_DELAY_0);
+ __raw_writel(DDR2_DLL_LOCK_DIFF, AM33XX_CMD1_DLL_LOCK_DIFF_0);
+ __raw_writel(DDR2_INVERT_CLKOUT, AM33XX_CMD1_INVERT_CLKOUT_0);
+
+ __raw_writel(DDR2_RATIO, AM33XX_CMD2_CTRL_SLAVE_RATIO_0);
+ __raw_writel(CMD_FORCE, AM33XX_CMD2_CTRL_SLAVE_FORCE_0);
+ __raw_writel(CMD_DELAY, AM33XX_CMD2_CTRL_SLAVE_DELAY_0);
+ __raw_writel(DDR2_DLL_LOCK_DIFF, AM33XX_CMD2_DLL_LOCK_DIFF_0);
+ __raw_writel(DDR2_INVERT_CLKOUT, AM33XX_CMD2_INVERT_CLKOUT_0);
+}
+
+static void beaglebone_config_vtp(void)
+{
+ __raw_writel(__raw_readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_ENABLE,
+ AM33XX_VTP0_CTRL_REG);
+ __raw_writel(__raw_readl(AM33XX_VTP0_CTRL_REG) & (~VTP_CTRL_START_EN),
+ AM33XX_VTP0_CTRL_REG);
+ __raw_writel(__raw_readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_START_EN,
+ AM33XX_VTP0_CTRL_REG);
+
+ /* Poll for READY */
+ while ((__raw_readl(AM33XX_VTP0_CTRL_REG) & VTP_CTRL_READY) != VTP_CTRL_READY);
+}
+
+static void beaglebone_config_emif_ddr2(void)
+{
+ u32 i;
+
+ /*Program EMIF0 CFG Registers*/
+ __raw_writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1));
+ __raw_writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1_SHADOW));
+ __raw_writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_2));
+ __raw_writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1));
+ __raw_writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1_SHADOW));
+ __raw_writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2));
+ __raw_writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2_SHADOW));
+ __raw_writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3));
+ __raw_writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3_SHADOW));
+
+ __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
+ __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG2));
+
+ /* __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL);
+ __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL_SHD); */
+ __raw_writel(0x00004650, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+ __raw_writel(0x00004650, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
+
+ for (i = 0; i < 5000; i++) {
+
+ }
+
+ /* __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL);
+ __raw_writel(EMIF_SDMGT, EMIF0_0_SDRAM_MGMT_CTRL_SHD); */
+ __raw_writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+ __raw_writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
+
+ __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
+ __raw_writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG2));
+}
+
+static void beaglebone_config_ddr(void)
+{
+ enable_ddr_clocks();
+
+ beaglebone_config_vtp();
+
+ beaglebone_cmd_macro_config();
+ beaglebone_data_macro_config(0);
+ beaglebone_data_macro_config(1);
+
+ __raw_writel(PHY_RANK0_DELAY, AM33XX_DATA0_RANK0_DELAYS_0);
+ __raw_writel(PHY_RANK0_DELAY, AM33XX_DATA1_RANK0_DELAYS_0);
+
+ __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD0_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD1_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD2_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA0_IOCTRL);
+ __raw_writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA1_IOCTRL);
+
+ __raw_writel(__raw_readl(AM33XX_DDR_IO_CTRL) & 0xefffffff, AM33XX_DDR_IO_CTRL);
+ __raw_writel(__raw_readl(AM33XX_DDR_CKE_CTRL) | 0x00000001, AM33XX_DDR_CKE_CTRL);
+
+ beaglebone_config_emif_ddr2();
+}
+
+/*
+ * early system init of muxing and clocks.
+ */
+void beaglebone_sram_init(void)
+{
+ u32 regVal, uart_base;
+
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ beaglebone_config_ddr();
+
+ /* UART softreset */
+ uart_base = AM33XX_UART0_BASE;
+
+ regVal = __raw_readl(uart_base + UART_SYSCFG_OFFSET);
+ regVal |= UART_RESET;
+ __raw_writel(regVal, (uart_base + UART_SYSCFG_OFFSET) );
+ while ((__raw_readl(uart_base + UART_SYSSTS_OFFSET) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK);
+
+ /* Disable smart idle */
+ regVal = __raw_readl((uart_base + UART_SYSCFG_OFFSET));
+ regVal |= UART_SMART_IDLE_EN;
+ __raw_writel(regVal, (uart_base + UART_SYSCFG_OFFSET));
+}
+
+
+/**
+ * @brief The basic entry point for board initialization.
+ *
+ * This is called as part of machine init (after arch init).
+ * This is again called with stack in SRAM, so not too many
+ * constructs possible here.
+ *
+ * @return void
+ */
+static int beaglebone_board_init(void)
+{
+ int in_sdram = running_in_sdram();
+
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ __raw_writel(WDT_DISABLE_CODE1, AM33XX_WDT_REG(WSPR));
+ while(__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0);
+ __raw_writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR));
+ while(__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0);
+
+ /* Dont reconfigure SDRAM while running in SDRAM! */
+ if (!in_sdram)
+ beaglebone_sram_init();
+
+ /* Enable pin mux */
+ enable_uart0_pin_mux();
+
+ return 0;
+}
+pure_initcall(beaglebone_board_init);
+
+/******************** Board Run Time *******************/
+
+#ifdef CONFIG_DRIVER_SERIAL_NS16550
+
+/**
+ * @brief UART serial port initialization - remember to enable COM clocks in
+ * arch
+ *
+ * @return result of device registration
+ */
+static int beaglebone_console_init(void)
+{
+ am33xx_add_uart0();
+
+ return 0;
+}
+console_initcall(beaglebone_console_init);
+#endif /* CONFIG_DRIVER_SERIAL_NS16550 */
+
+static int beaglebone_mem_init(void)
+{
+ arm_add_mem_device("ram0", 0x80000000, 256 * 1024 * 1024);
+
+ return 0;
+}
+mem_initcall(beaglebone_mem_init);
+
+static int beaglebone_devices_init(void)
+{
+ am33xx_add_mmc0(NULL);
+
+ enable_i2c0_pin_mux();
+
+ armlinux_set_bootparams((void *)0x80000100);
+ armlinux_set_architecture(MACH_TYPE_BEAGLEBONE);
+
+ return 0;
+}
+device_initcall(beaglebone_devices_init);
+
+#ifdef CONFIG_DEFAULT_ENVIRONMENT
+static int beaglebone_env_init(void)
+{
+ struct stat s;
+ char *diskdev = "/dev/disk0.0";
+ int ret;
+
+ ret = stat(diskdev, &s);
+ if (ret) {
+ printf("device %s not found. Using default environment\n", diskdev);
+ return 0;
+ }
+
+ mkdir ("/boot", 0666);
+ ret = mount(diskdev, "fat", "/boot");
+ if (ret) {
+ printf("failed to mount %s\n", diskdev);
+ return 0;
+ }
+
+ if (IS_ENABLED(CONFIG_OMAP_BUILD_IFT))
+ default_environment_path = "/dev/defaultenv";
+ else
+ default_environment_path = "/boot/barebox.env";
+
+ return 0;
+}
+late_initcall(beaglebone_env_init);
+#endif
diff --git a/arch/arm/boards/beaglebone/config.h b/arch/arm/boards/beaglebone/config.h
new file mode 100644
index 0000000..252aa79
--- /dev/null
+++ b/arch/arm/boards/beaglebone/config.h
@@ -0,0 +1,17 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _CONFIG_H_
+# define _CONFIG_H_
+
+#endif /* _CONFIG_H_ */
diff --git a/arch/arm/boards/beaglebone/env/boot/sd b/arch/arm/boards/beaglebone/env/boot/sd
new file mode 100644
index 0000000..dce0605
--- /dev/null
+++ b/arch/arm/boards/beaglebone/env/boot/sd
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "kernel & rootfs on SD card"
+ exit
+fi
+
+global.bootm.image=/boot/uImage
+global.bootm.oftree=/boot/oftree
+#global.bootm.initrd=<path to initrd>
+global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
diff --git a/arch/arm/boards/beaglebone/env/config b/arch/arm/boards/beaglebone/env/config
new file mode 100644
index 0000000..4b7a635
--- /dev/null
+++ b/arch/arm/boards/beaglebone/env/config
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+# change network settings in /env/network/eth0
+# change mtd partition settings and automountpoints in /env/init/*
+
+global.hostname=beaglebone
+
+# set to false if you do not want to have colors
+global.allow_color=true
+
+# user (used for network filenames)
+global.user=none
+
+# timeout in seconds before the default boot entry is started
+global.autoboot_timeout=3
+
+# default boot entry (one of /env/boot/*)
+global.boot.default=sd
+
+# base bootargs
+global.linux.bootargs.base="console=ttyO0,115200n8"
diff --git a/arch/arm/configs/am335x_beaglebone_defconfig b/arch/arm/configs/am335x_beaglebone_defconfig
new file mode 100644
index 0000000..2066d9c
--- /dev/null
+++ b/arch/arm/configs/am335x_beaglebone_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_AM33XX=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x81000000
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="barebox> "
+CONFIG_LONGHELP=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+# CONFIG_TIMESTAMP is not set
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/beaglebone/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_OMAP_HSMMC=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/configs/am335x_beaglebone_mlo_large_defconfig b/arch/arm/configs/am335x_beaglebone_mlo_large_defconfig
new file mode 100644
index 0000000..d90f581
--- /dev/null
+++ b/arch/arm/configs/am335x_beaglebone_mlo_large_defconfig
@@ -0,0 +1,55 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_AM33XX=y
+# CONFIG_OMAP_GPMC is not set
+CONFIG_OMAP_BUILD_IFT=y
+CONFIG_THUMB2_BAREBOX=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x402F0400
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x4030B800
+CONFIG_STACK_SIZE=0x1600
+CONFIG_MALLOC_BASE=0x8F000000
+CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_PROMPT="barebox> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_TIMESTAMP is not set
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/beaglebone/env"
+CONFIG_BAREBOXENV_TARGET=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+# CONFIG_CMD_UMOUNT is not set
+# CONFIG_CMD_CLEAR is not set
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIMEOUT=y
+# CONFIG_CMD_VERSION is not set
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+# CONFIG_MCI_INFO is not set
+# CONFIG_MCI_WRITE is not set
+CONFIG_MCI_OMAP_HSMMC=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
new file mode 100644
index 0000000..886dad9
--- /dev/null
+++ b/arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
@@ -0,0 +1,31 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_AM33XX=y
+# CONFIG_OMAP_GPMC is not set
+CONFIG_OMAP_BUILD_IFT=y
+CONFIG_THUMB2_BAREBOX=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+# CONFIG_BANNER is not set
+# CONFIG_MEMINFO is not set
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x402F0400
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x4030B800
+CONFIG_STACK_SIZE=0x1600
+CONFIG_MALLOC_BASE=0x8F000000
+CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_PROMPT="MLO>"
+CONFIG_SHELL_NONE=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+# CONFIG_SPI is not set
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_OMAP_HSMMC=y
+# CONFIG_FS_RAMFS is not set
+# CONFIG_FS_DEVFS is not set
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index b94500a..ae1e07e 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -105,7 +105,8 @@ config OMAP4_USBBOOT
config BOARDINFO
default "Archos G9" if MACH_ARCHOSG9
default "Texas Instrument's SDP343x" if MACH_OMAP343xSDP
- default "Texas Instrument's Beagle" if MACH_BEAGLE
+ default "Texas Instrument's Beagle Board" if MACH_BEAGLE
+ default "Texas Instrument's Beagle Bone" if MACH_BEAGLEBONE
default "Texas Instrument's OMAP3EVM" if MACH_OMAP3EVM
default "Texas Instrument's Panda" if MACH_PANDA
default "Phytec phyCORE pcm049" if MACH_PCM049
@@ -129,6 +130,14 @@ config MACH_BEAGLE
help
Say Y here if you are using Beagle Board
+config MACH_BEAGLEBONE
+ bool "Texas Instrument's Beagle Bone"
+ select OMAP_CLOCK_ALL
+ select HAVE_NOSHELL
+ depends on ARCH_AM33XX
+ help
+ Say Y here if you are using Beagle Bone
+
config MACH_OMAP3EVM
bool "Texas Instrument's OMAP3 EVM"
select HAVE_NOSHELL
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
index 48a951b..94e42c6 100644
--- a/arch/arm/mach-omap/Makefile
+++ b/arch/arm/mach-omap/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o auxcr.o
pbl-$(CONFIG_ARCH_OMAP3) += omap3_core.o omap3_generic.o auxcr.o
obj-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
pbl-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
-obj-$(CONFIG_ARCH_AM33XX) += am33xx_generic.o
+obj-$(CONFIG_ARCH_AM33XX) += am33xx_generic.o am33xx_clock.o am33xx_mux.o
obj-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
pbl-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
obj-$(CONFIG_OMAP_GPMC) += gpmc.o devices-gpmc-nand.o
diff --git a/arch/arm/mach-omap/am33xx_clock.c b/arch/arm/mach-omap/am33xx_clock.c
new file mode 100644
index 0000000..a28540c
--- /dev/null
+++ b/arch/arm/mach-omap/am33xx_clock.c
@@ -0,0 +1,289 @@
+/*
+ * pll.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <mach/am33xx-clock.h>
+
+#define PRCM_MOD_EN 0x2
+#define PRCM_FORCE_WAKEUP 0x2
+
+#define PRCM_EMIF_CLK_ACTIVITY (0x1 << 2)
+#define PRCM_L3_GCLK_ACTIVITY (0x1 << 4)
+
+#define PLL_BYPASS_MODE 0x4
+#define PLL_LOCK_MODE 0x7
+#define PLL_MULTIPLIER_SHIFT 8
+
+static void interface_clocks_enable(void)
+{
+ /* Enable all the Interconnect Modules */
+ __raw_writel(PRCM_MOD_EN, CM_PER_L3_CLKCTRL);
+ while (__raw_readl(CM_PER_L3_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L4LS_CLKCTRL);
+ while (__raw_readl(CM_PER_L4LS_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L4FW_CLKCTRL);
+ while (__raw_readl(CM_PER_L4FW_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_L4WKUP_CLKCTRL);
+ while (__raw_readl(CM_WKUP_L4WKUP_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L3_INSTR_CLKCTRL);
+ while (__raw_readl(CM_PER_L3_INSTR_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_L4HS_CLKCTRL);
+ while (__raw_readl(CM_PER_L4HS_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_SPI1_CLKCTRL);
+ while (__raw_readl(CM_PER_SPI1_CLKCTRL) != PRCM_MOD_EN);
+
+ /* GPIO0 */
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_GPIO0_CLKCTRL);
+ while (__raw_readl(CM_WKUP_GPIO0_CLKCTRL) != PRCM_MOD_EN);
+}
+
+static void power_domain_transition_enable(void)
+{
+ /*
+ * Force power domain wake up transition
+ * Ensure that the corresponding interface clock is active before
+ * using the peripheral
+ */
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L3_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L4LS_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_WKUP_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L4FW_CLKSTCTRL);
+
+ __raw_writel(PRCM_FORCE_WAKEUP, CM_PER_L3S_CLKSTCTRL);
+}
+
+/*
+ * Enable the module clock and the power domain for required peripherals
+ */
+static void per_clocks_enable(void)
+{
+ /* Enable the module clock */
+ __raw_writel(PRCM_MOD_EN, CM_PER_TIMER2_CLKCTRL);
+ while (__raw_readl(CM_PER_TIMER2_CLKCTRL) != PRCM_MOD_EN);
+
+ /* Select the Master osc 24 MHZ as Timer2 clock source */
+ __raw_writel(0x1, CLKSEL_TIMER2_CLK);
+
+ /* UART0 */
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_UART0_CLKCTRL);
+ while (__raw_readl(CM_WKUP_UART0_CLKCTRL) != PRCM_MOD_EN);
+
+ /* UART3 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_UART3_CLKCTRL);
+ while (__raw_readl(CM_PER_UART3_CLKCTRL) != PRCM_MOD_EN);
+
+ /* GPMC */
+ __raw_writel(PRCM_MOD_EN, CM_PER_GPMC_CLKCTRL);
+ while (__raw_readl(CM_PER_GPMC_CLKCTRL) != PRCM_MOD_EN);
+
+ /* ELM */
+ __raw_writel(PRCM_MOD_EN, CM_PER_ELM_CLKCTRL);
+ while (__raw_readl(CM_PER_ELM_CLKCTRL) != PRCM_MOD_EN);
+
+ /* i2c0 */
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_I2C0_CLKCTRL);
+ while (__raw_readl(CM_WKUP_I2C0_CLKCTRL) != PRCM_MOD_EN);
+
+ /* i2c1 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_I2C1_CLKCTRL);
+ while (__raw_readl(CM_PER_I2C1_CLKCTRL) != PRCM_MOD_EN);
+
+ /* i2c2 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_I2C2_CLKCTRL);
+ while (__raw_readl(CM_PER_I2C2_CLKCTRL) != PRCM_MOD_EN);
+
+ /* Ethernet */
+ __raw_writel(PRCM_MOD_EN, CM_PER_CPGMAC0_CLKCTRL);
+ __raw_writel(PRCM_MOD_EN, CM_PER_CPSW_CLKSTCTRL);
+ while ((__raw_readl(CM_PER_CPGMAC0_CLKCTRL) & 0x30000) != 0x0);
+
+ /* MMC 0 & 1 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_MMC0_CLKCTRL);
+ while (__raw_readl(CM_PER_MMC0_CLKCTRL) != PRCM_MOD_EN);
+ __raw_writel(PRCM_MOD_EN, CM_PER_MMC1_CLKCTRL);
+ while (__raw_readl(CM_PER_MMC1_CLKCTRL) != PRCM_MOD_EN);
+
+ /* Enable the control module though RBL would have done it*/
+ __raw_writel(PRCM_MOD_EN, CM_WKUP_CONTROL_CLKCTRL);
+ while (__raw_readl(CM_WKUP_CONTROL_CLKCTRL) != PRCM_MOD_EN);
+
+ /* SPI 0 & 1 */
+ __raw_writel(PRCM_MOD_EN, CM_PER_SPI0_CLKCTRL);
+ while (__raw_readl(CM_PER_SPI0_CLKCTRL) != PRCM_MOD_EN);
+
+ __raw_writel(PRCM_MOD_EN, CM_PER_SPI1_CLKCTRL);
+ while (__raw_readl(CM_PER_SPI1_CLKCTRL) != PRCM_MOD_EN);
+}
+
+static void mpu_pll_config(int mpupll_M)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_MPU);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_MPU);
+ div_m2 = __raw_readl(CM_DIV_M2_DPLL_MPU);
+
+ /* Set the PLL to bypass Mode */
+ __raw_writel(PLL_BYPASS_MODE, CM_CLKMODE_DPLL_MPU);
+
+ while(__raw_readl(CM_IDLEST_DPLL_MPU) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((mpupll_M << 0x8) | MPUPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_MPU);
+
+ div_m2 = div_m2 & ~0x1f;
+ div_m2 = div_m2 | MPUPLL_M2;
+ __raw_writel(div_m2, CM_DIV_M2_DPLL_MPU);
+
+ clkmode = clkmode | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_MPU);
+
+ while(__raw_readl(CM_IDLEST_DPLL_MPU) != 0x1);
+}
+
+static void core_pll_config(void)
+{
+ u32 clkmode, clksel, div_m4, div_m5, div_m6;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_CORE);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_CORE);
+ div_m4 = __raw_readl(CM_DIV_M4_DPLL_CORE);
+ div_m5 = __raw_readl(CM_DIV_M5_DPLL_CORE);
+ div_m6 = __raw_readl(CM_DIV_M6_DPLL_CORE);
+
+ /* Set the PLL to bypass Mode */
+ __raw_writel(PLL_BYPASS_MODE, CM_CLKMODE_DPLL_CORE);
+
+ while(__raw_readl(CM_IDLEST_DPLL_CORE) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((COREPLL_M << 0x8) | COREPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_CORE);
+
+ div_m4 = div_m4 & ~0x1f;
+ div_m4 = div_m4 | COREPLL_M4;
+ __raw_writel(div_m4, CM_DIV_M4_DPLL_CORE);
+
+ div_m5 = div_m5 & ~0x1f;
+ div_m5 = div_m5 | COREPLL_M5;
+ __raw_writel(div_m5, CM_DIV_M5_DPLL_CORE);
+
+ div_m6 = div_m6 & ~0x1f;
+ div_m6 = div_m6 | COREPLL_M6;
+ __raw_writel(div_m6, CM_DIV_M6_DPLL_CORE);
+
+
+ clkmode = clkmode | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_CORE);
+
+ while(__raw_readl(CM_IDLEST_DPLL_CORE) != 0x1);
+}
+
+static void per_pll_config(void)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_PER);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_PER);
+ div_m2 = __raw_readl(CM_DIV_M2_DPLL_PER);
+
+ /* Set the PLL to bypass Mode */
+ __raw_writel(PLL_BYPASS_MODE, CM_CLKMODE_DPLL_PER);
+
+ while(__raw_readl(CM_IDLEST_DPLL_PER) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((PERPLL_M << 0x8) | PERPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_PER);
+
+ div_m2 = div_m2 & ~0x7f;
+ div_m2 = div_m2 | PERPLL_M2;
+ __raw_writel(div_m2, CM_DIV_M2_DPLL_PER);
+
+ clkmode = clkmode | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_PER);
+
+ while(__raw_readl(CM_IDLEST_DPLL_PER) != 0x1);
+}
+
+static void ddr_pll_config(void)
+{
+ u32 clkmode, clksel, div_m2;
+
+ clkmode = __raw_readl(CM_CLKMODE_DPLL_DDR);
+ clksel = __raw_readl(CM_CLKSEL_DPLL_DDR);
+ div_m2 = __raw_readl(CM_DIV_M2_DPLL_DDR);
+
+ /* Set the PLL to bypass Mode */
+ clkmode = (clkmode & 0xfffffff8) | 0x00000004;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_DDR);
+
+ while ((__raw_readl(CM_IDLEST_DPLL_DDR) & 0x00000100) != 0x00000100);
+
+ clksel = clksel & (~0x7ffff);
+ clksel = clksel | ((DDRPLL_M << 0x8) | DDRPLL_N);
+ __raw_writel(clksel, CM_CLKSEL_DPLL_DDR);
+
+ div_m2 = div_m2 & 0xFFFFFFE0;
+ div_m2 = div_m2 | DDRPLL_M2;
+ __raw_writel(div_m2, CM_DIV_M2_DPLL_DDR);
+
+ clkmode = (clkmode & 0xfffffff8) | 0x7;
+ __raw_writel(clkmode, CM_CLKMODE_DPLL_DDR);
+
+ while ((__raw_readl(CM_IDLEST_DPLL_DDR) & 0x00000001) != 0x1);
+}
+
+void enable_ddr_clocks(void)
+{
+ /* Enable the EMIF_FW Functional clock */
+ __raw_writel(PRCM_MOD_EN, CM_PER_EMIF_FW_CLKCTRL);
+ /* Enable EMIF0 Clock */
+ __raw_writel(PRCM_MOD_EN, CM_PER_EMIF_CLKCTRL);
+ /* Poll for emif_gclk & L3_G clock are active */
+ while ((__raw_readl(CM_PER_L3_CLKSTCTRL) & (PRCM_EMIF_CLK_ACTIVITY |
+ PRCM_L3_GCLK_ACTIVITY)) != (PRCM_EMIF_CLK_ACTIVITY |
+ PRCM_L3_GCLK_ACTIVITY));
+ /* Poll if module is functional */
+ while ((__raw_readl(CM_PER_EMIF_CLKCTRL)) != PRCM_MOD_EN);
+
+}
+
+/*
+ * Configure the PLL/PRCM for necessary peripherals
+ */
+void pll_init()
+{
+ mpu_pll_config(MPUPLL_M_500);
+ core_pll_config();
+ per_pll_config();
+ ddr_pll_config();
+ /* Enable the required interconnect clocks */
+ interface_clocks_enable();
+ /* Enable power domain transition */
+ power_domain_transition_enable();
+ /* Enable the required peripherals */
+ per_clocks_enable();
+}
diff --git a/arch/arm/mach-omap/am33xx_generic.c b/arch/arm/mach-omap/am33xx_generic.c
index f73f946..e8293f7 100644
--- a/arch/arm/mach-omap/am33xx_generic.c
+++ b/arch/arm/mach-omap/am33xx_generic.c
@@ -1,5 +1,6 @@
/*
* (C) Copyright 2012 Teresa Gámez, Phytec Messtechnik GmbH
+ * (C) Copyright 2012 Jan Luebbe <j.luebbe@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -20,6 +21,8 @@
#include <io.h>
#include <mach/am33xx-silicon.h>
#include <mach/am33xx-clock.h>
+#include <mach/sys_info.h>
+#include <mach/xload.h>
void __noreturn reset_cpu(unsigned long addr)
{
@@ -27,3 +30,68 @@ void __noreturn reset_cpu(unsigned long addr)
while (1);
}
+
+/**
+ * @brief Get the upper address of current execution
+ *
+ * we can use this to figure out if we are running in SRAM /
+ * XIP Flash or in SDRAM
+ *
+ * @return base address
+ */
+u32 get_base(void)
+{
+ u32 val;
+ __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+ val &= 0xF0000000;
+ val >>= 28;
+ return val;
+}
+
+/**
+ * @brief Are we running in Flash XIP?
+ *
+ * If the base is in GPMC address space, we probably are!
+ *
+ * @return 1 if we are running in XIP mode, else return 0
+ */
+u32 running_in_flash(void)
+{
+ if (get_base() < 4)
+ return 1; /* in flash */
+ return 0; /* running in SRAM or SDRAM */
+}
+
+/**
+ * @brief Are we running in OMAP internal SRAM?
+ *
+ * If in SRAM address, then yes!
+ *
+ * @return 1 if we are running in SRAM, else return 0
+ */
+u32 running_in_sram(void)
+{
+ if (get_base() == 4)
+ return 1; /* in SRAM */
+ return 0; /* running in FLASH or SDRAM */
+}
+
+/**
+ * @brief Are we running in SDRAM?
+ *
+ * if we are not in GPMC nor in SRAM address space,
+ * we are in SDRAM execution area
+ *
+ * @return 1 if we are running from SDRAM, else return 0
+ */
+u32 running_in_sdram(void)
+{
+ if (get_base() > 4)
+ return 1; /* in sdram */
+ return 0; /* running in SRAM or FLASH */
+}
+
+enum omap_boot_src am33xx_bootsrc(void)
+{
+ return OMAP_BOOTSRC_MMC1; /* only MMC for now */
+}
diff --git a/arch/arm/mach-omap/am33xx_mux.c b/arch/arm/mach-omap/am33xx_mux.c
new file mode 100644
index 0000000..22bf317
--- /dev/null
+++ b/arch/arm/mach-omap/am33xx_mux.c
@@ -0,0 +1,506 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <mach/am33xx-silicon.h>
+
+#define MUX_CFG(value, offset) \
+ __raw_writel(value, (AM33XX_CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL (0x1 << 6)
+#define RXACTIVE (0x1 << 5)
+#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */
+#define PULLUDEN (0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
+#define MODE(val) val
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+/* TODO replace with defines */
+struct pad_signals {
+ int gpmc_ad0;
+ int gpmc_ad1;
+ int gpmc_ad2;
+ int gpmc_ad3;
+ int gpmc_ad4;
+ int gpmc_ad5;
+ int gpmc_ad6;
+ int gpmc_ad7;
+ int gpmc_ad8;
+ int gpmc_ad9;
+ int gpmc_ad10;
+ int gpmc_ad11;
+ int gpmc_ad12;
+ int gpmc_ad13;
+ int gpmc_ad14;
+ int gpmc_ad15;
+ int gpmc_a0;
+ int gpmc_a1;
+ int gpmc_a2;
+ int gpmc_a3;
+ int gpmc_a4;
+ int gpmc_a5;
+ int gpmc_a6;
+ int gpmc_a7;
+ int gpmc_a8;
+ int gpmc_a9;
+ int gpmc_a10;
+ int gpmc_a11;
+ int gpmc_wait0;
+ int gpmc_wpn;
+ int gpmc_be1n;
+ int gpmc_csn0;
+ int gpmc_csn1;
+ int gpmc_csn2;
+ int gpmc_csn3;
+ int gpmc_clk;
+ int gpmc_advn_ale;
+ int gpmc_oen_ren;
+ int gpmc_wen;
+ int gpmc_be0n_cle;
+ int lcd_data0;
+ int lcd_data1;
+ int lcd_data2;
+ int lcd_data3;
+ int lcd_data4;
+ int lcd_data5;
+ int lcd_data6;
+ int lcd_data7;
+ int lcd_data8;
+ int lcd_data9;
+ int lcd_data10;
+ int lcd_data11;
+ int lcd_data12;
+ int lcd_data13;
+ int lcd_data14;
+ int lcd_data15;
+ int lcd_vsync;
+ int lcd_hsync;
+ int lcd_pclk;
+ int lcd_ac_bias_en;
+ int mmc0_dat3;
+ int mmc0_dat2;
+ int mmc0_dat1;
+ int mmc0_dat0;
+ int mmc0_clk;
+ int mmc0_cmd;
+ int mii1_col;
+ int mii1_crs;
+ int mii1_rxerr;
+ int mii1_txen;
+ int mii1_rxdv;
+ int mii1_txd3;
+ int mii1_txd2;
+ int mii1_txd1;
+ int mii1_txd0;
+ int mii1_txclk;
+ int mii1_rxclk;
+ int mii1_rxd3;
+ int mii1_rxd2;
+ int mii1_rxd1;
+ int mii1_rxd0;
+ int rmii1_refclk;
+ int mdio_data;
+ int mdio_clk;
+ int spi0_sclk;
+ int spi0_d0;
+ int spi0_d1;
+ int spi0_cs0;
+ int spi0_cs1;
+ int ecap0_in_pwm0_out;
+ int uart0_ctsn;
+ int uart0_rtsn;
+ int uart0_rxd;
+ int uart0_txd;
+ int uart1_ctsn;
+ int uart1_rtsn;
+ int uart1_rxd;
+ int uart1_txd;
+ int i2c0_sda;
+ int i2c0_scl;
+ int mcasp0_aclkx;
+ int mcasp0_fsx;
+ int mcasp0_axr0;
+ int mcasp0_ahclkr;
+ int mcasp0_aclkr;
+ int mcasp0_fsr;
+ int mcasp0_axr1;
+ int mcasp0_ahclkx;
+ int xdma_event_intr0;
+ int xdma_event_intr1;
+ int nresetin_out;
+ int porz;
+ int nnmi;
+ int osc0_in;
+ int osc0_out;
+ int rsvd1;
+ int tms;
+ int tdi;
+ int tdo;
+ int tck;
+ int ntrst;
+ int emu0;
+ int emu1;
+ int osc1_in;
+ int osc1_out;
+ int pmic_power_en;
+ int rtc_porz;
+ int rsvd2;
+ int ext_wakeup;
+ int enz_kaldo_1p8v;
+ int usb0_dm;
+ int usb0_dp;
+ int usb0_ce;
+ int usb0_id;
+ int usb0_vbus;
+ int usb0_drvvbus;
+ int usb1_dm;
+ int usb1_dp;
+ int usb1_ce;
+ int usb1_id;
+ int usb1_vbus;
+ int usb1_drvvbus;
+ int ddr_resetn;
+ int ddr_csn0;
+ int ddr_cke;
+ int ddr_ck;
+ int ddr_nck;
+ int ddr_casn;
+ int ddr_rasn;
+ int ddr_wen;
+ int ddr_ba0;
+ int ddr_ba1;
+ int ddr_ba2;
+ int ddr_a0;
+ int ddr_a1;
+ int ddr_a2;
+ int ddr_a3;
+ int ddr_a4;
+ int ddr_a5;
+ int ddr_a6;
+ int ddr_a7;
+ int ddr_a8;
+ int ddr_a9;
+ int ddr_a10;
+ int ddr_a11;
+ int ddr_a12;
+ int ddr_a13;
+ int ddr_a14;
+ int ddr_a15;
+ int ddr_odt;
+ int ddr_d0;
+ int ddr_d1;
+ int ddr_d2;
+ int ddr_d3;
+ int ddr_d4;
+ int ddr_d5;
+ int ddr_d6;
+ int ddr_d7;
+ int ddr_d8;
+ int ddr_d9;
+ int ddr_d10;
+ int ddr_d11;
+ int ddr_d12;
+ int ddr_d13;
+ int ddr_d14;
+ int ddr_d15;
+ int ddr_dqm0;
+ int ddr_dqm1;
+ int ddr_dqs0;
+ int ddr_dqsn0;
+ int ddr_dqs1;
+ int ddr_dqsn1;
+ int ddr_vref;
+ int ddr_vtp;
+ int ddr_strben0;
+ int ddr_strben1;
+ int ain7;
+ int ain6;
+ int ain5;
+ int ain4;
+ int ain3;
+ int ain2;
+ int ain1;
+ int ain0;
+ int vrefp;
+ int vrefn;
+};
+
+struct module_pin_mux {
+ short reg_offset;
+ unsigned char val;
+};
+
+#define PAD_CTRL_BASE 0x800
+#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
+ (PAD_CTRL_BASE))->x)
+
+static const __maybe_unused struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux uart3_pin_mux[] = {
+ {OFFSET(spi0_cs1), (MODE(1) | PULLUDEN | RXACTIVE)}, /* UART3_RXD */
+ {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
+ {-1},
+};
+
+
+#ifdef CONFIG_NAND
+static const __maybe_unused struct module_pin_mux nand_pin_mux[] = {
+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
+ {-1},
+};
+#endif
+
+static const __maybe_unused struct module_pin_mux i2c0_pin_mux[] = {
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux i2c1_pin_mux[] = {
+ {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux i2c2_pin_mux[] = {
+ {OFFSET(uart1_ctsn), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(uart1_rtsn), (MODE(3) | RXACTIVE | PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux rgmii1_pin_mux[] = {
+ {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
+ {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
+ {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
+ {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
+ {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
+ {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
+ {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
+ {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
+ {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
+ {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
+ {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
+ {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux rgmii2_pin_mux[] = {
+ {OFFSET(gpmc_a0), MODE(2)}, /* RGMII2_TCTL */
+ {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII2_RCTL */
+ {OFFSET(gpmc_a2), MODE(2)}, /* RGMII2_TD3 */
+ {OFFSET(gpmc_a3), MODE(2)}, /* RGMII2_TD2 */
+ {OFFSET(gpmc_a4), MODE(2)}, /* RGMII2_TD1 */
+ {OFFSET(gpmc_a5), MODE(2)}, /* RGMII2_TD0 */
+ {OFFSET(gpmc_a6), MODE(2)}, /* RGMII2_TCLK */
+ {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII2_RCLK */
+ {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII2_RD3 */
+ {OFFSET(gpmc_a9), MODE(2) | RXACTIVE}, /* RGMII2_RD2 */
+ {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII2_RD1 */
+ {OFFSET(gpmc_a11), MODE(2) | RXACTIVE}, /* RGMII2_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux mii1_pin_mux[] = {
+ {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */
+ {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */
+ {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */
+ {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */
+ {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */
+ {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */
+ {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */
+ {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */
+ {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */
+ {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */
+ {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */
+ {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */
+ {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux rmii1_pin_mux[] = {
+ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */
+ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */
+ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */
+ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */
+ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */
+ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */
+ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */
+ {-1},
+};
+
+#ifdef CONFIG_NOR
+static const __maybe_unused struct module_pin_mux nor_pin_mux[] = {
+ {OFFSET(lcd_data0), MODE(1) | PULLUDEN}, /* NOR_A0 */
+ {OFFSET(lcd_data1), MODE(1) | PULLUDEN}, /* NOR_A1 */
+ {OFFSET(lcd_data2), MODE(1) | PULLUDEN}, /* NOR_A2 */
+ {OFFSET(lcd_data3), MODE(1) | PULLUDEN}, /* NOR_A3 */
+ {OFFSET(lcd_data4), MODE(1) | PULLUDEN}, /* NOR_A4 */
+ {OFFSET(lcd_data5), MODE(1) | PULLUDEN}, /* NOR_A5 */
+ {OFFSET(lcd_data6), MODE(1) | PULLUDEN}, /* NOR_A6 */
+ {OFFSET(lcd_data7), MODE(1) | PULLUDEN}, /* NOR_A7 */
+ {OFFSET(gpmc_a8), MODE(0)}, /* NOR_A8 */
+ {OFFSET(gpmc_a9), MODE(0)}, /* NOR_A9 */
+ {OFFSET(gpmc_a10), MODE(0)}, /* NOR_A10 */
+ {OFFSET(gpmc_a11), MODE(0)}, /* NOR_A11 */
+ {OFFSET(lcd_data8), MODE(1) | PULLUDEN}, /* NOR_A12 */
+ {OFFSET(lcd_data9), MODE(1) | PULLUDEN}, /* NOR_A13 */
+ {OFFSET(lcd_data10), MODE(1) | PULLUDEN}, /* NOR_A14 */
+ {OFFSET(lcd_data11), MODE(1) | PULLUDEN}, /* NOR_A15 */
+ {OFFSET(lcd_data12), MODE(1) | PULLUDEN}, /* NOR_A16 */
+ {OFFSET(lcd_data13), MODE(1) | PULLUDEN}, /* NOR_A17 */
+ {OFFSET(lcd_data14), MODE(1) | PULLUDEN}, /* NOR_A18 */
+ {OFFSET(lcd_data15), MODE(1) | PULLUDEN}, /* NOR_A19 */
+ {OFFSET(gpmc_a4), MODE(4)}, /* NOR_A20 */
+ {OFFSET(gpmc_a5), MODE(4)}, /* NOR_A21 */
+ {OFFSET(gpmc_a6), MODE(4)}, /* NOR_A22 */
+ {OFFSET(gpmc_ad0), MODE(0) | RXACTIVE}, /* NOR_AD0 */
+ {OFFSET(gpmc_ad1), MODE(0) | RXACTIVE}, /* NOR_AD1 */
+ {OFFSET(gpmc_ad2), MODE(0) | RXACTIVE}, /* NOR_AD2 */
+ {OFFSET(gpmc_ad3), MODE(0) | RXACTIVE}, /* NOR_AD3 */
+ {OFFSET(gpmc_ad4), MODE(0) | RXACTIVE}, /* NOR_AD4 */
+ {OFFSET(gpmc_ad5), MODE(0) | RXACTIVE}, /* NOR_AD5 */
+ {OFFSET(gpmc_ad6), MODE(0) | RXACTIVE}, /* NOR_AD6 */
+ {OFFSET(gpmc_ad7), MODE(0) | RXACTIVE}, /* NOR_AD7 */
+ {OFFSET(gpmc_ad8), MODE(0) | RXACTIVE}, /* NOR_AD8 */
+ {OFFSET(gpmc_ad9), MODE(0) | RXACTIVE}, /* NOR_AD9 */
+ {OFFSET(gpmc_ad10), MODE(0) | RXACTIVE}, /* NOR_AD10 */
+ {OFFSET(gpmc_ad11), MODE(0) | RXACTIVE}, /* NOR_AD11 */
+ {OFFSET(gpmc_ad12), MODE(0) | RXACTIVE}, /* NOR_AD12 */
+ {OFFSET(gpmc_ad13), MODE(0) | RXACTIVE}, /* NOR_AD13 */
+ {OFFSET(gpmc_ad14), MODE(0) | RXACTIVE}, /* NOR_AD14 */
+ {OFFSET(gpmc_ad15), MODE(0) | RXACTIVE}, /* NOR_AD15 */
+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, /* NOR_CE */
+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUP_EN)}, /* NOR_OE */
+ {OFFSET(gpmc_wen), (MODE(0) | PULLUP_EN)}, /* NOR_WEN */
+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NOR WAIT */
+ {OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDEN}, /* NOR RESET */
+ {-1},
+};
+#endif
+
+static const __maybe_unused struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
+ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux mmc1_pin_mux[] = {
+ {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE)}, /* MMC1_DAT3 */
+ {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE)}, /* MMC1_DAT2 */
+ {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE)}, /* MMC1_DAT1 */
+ {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE)}, /* MMC1_DAT0 */
+ {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */
+ {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */
+ {OFFSET(uart1_rxd), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */
+ {OFFSET(mcasp0_fsx), (MODE(4) | RXACTIVE)}, /* MMC1_CD */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux spi0_pin_mux[] = {
+ {OFFSET(spi0_sclk), MODE(0) | PULLUDEN | RXACTIVE}, /*SPI0_SCLK */
+ {OFFSET(spi0_d0), MODE(0) | PULLUDEN | PULLUP_EN |
+ RXACTIVE}, /*SPI0_D0 */
+ {OFFSET(spi0_d1), MODE(0) | PULLUDEN |
+ RXACTIVE}, /*SPI0_D1 */
+ {OFFSET(spi0_cs0), MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE}, /*SPI0_CS0 */
+ {-1},
+};
+
+static const __maybe_unused struct module_pin_mux spi1_pin_mux[] = {
+ {OFFSET(mcasp0_aclkx), MODE(3) | PULLUDEN | RXACTIVE}, /*SPI0_SCLK */
+ {OFFSET(mcasp0_fsx), MODE(3) | PULLUDEN | PULLUP_EN |
+ RXACTIVE}, /*SPI0_D0 */
+ {OFFSET(mcasp0_axr0), MODE(3) | PULLUDEN | RXACTIVE}, /*SPI0_D1 */
+ {OFFSET(mcasp0_ahclkr), MODE(3) | PULLUDEN | PULLUP_EN |
+ RXACTIVE}, /*SPI0_CS0 */
+ {-1},
+};
+
+/*
+ * Configure the pin mux for the module
+ */
+static void configure_module_pin_mux(const struct module_pin_mux *mod_pin_mux)
+{
+ int i;
+
+ if (!mod_pin_mux)
+ return;
+
+ for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
+ MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+}
+
+void enable_mii1_pin_mux(void)
+{
+ configure_module_pin_mux(mii1_pin_mux);
+}
+
+void enable_i2c0_pin_mux(void)
+{
+ configure_module_pin_mux(i2c0_pin_mux);
+}
+
+void enable_i2c1_pin_mux(void)
+{
+ configure_module_pin_mux(i2c1_pin_mux);
+}
+
+void enable_i2c2_pin_mux(void)
+{
+ configure_module_pin_mux(i2c2_pin_mux);
+}
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
diff --git a/arch/arm/mach-omap/gpmc.c b/arch/arm/mach-omap/gpmc.c
index 4f54a10..3aaa4f6 100644
--- a/arch/arm/mach-omap/gpmc.c
+++ b/arch/arm/mach-omap/gpmc.c
@@ -26,6 +26,7 @@
#include <errno.h>
#include <mach/omap3-silicon.h>
#include <mach/omap4-silicon.h>
+#include <mach/am33xx-silicon.h>
#include <mach/gpmc.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>
@@ -38,6 +39,8 @@ static int gpmc_init(void)
omap_gpmc_base = (void *)OMAP3_GPMC_BASE;
#elif defined(CONFIG_ARCH_OMAP4)
omap_gpmc_base = (void *)OMAP44XX_GPMC_BASE;
+#elif defined(CONFIG_ARCH_AM33XX)
+ omap_gpmc_base = (void *)AM33XX_GPMC_BASE;
#else
#error "Unknown ARCH"
#endif
diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
index 6845412..39c107f 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-clock.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
@@ -19,5 +19,176 @@
#ifndef _AM33XX_CLOCKS_H_
#define _AM33XX_CLOCKS_H_
+#include "am33xx-silicon.h"
+
+/* Put the pll config values over here */
+
+#define OSC 24
+
+/* MAIN PLL Fdll = 1 GHZ, */
+#define MPUPLL_M_500 500 /* 125 * n */
+#define MPUPLL_M_550 550 /* 125 * n */
+#define MPUPLL_M_600 600 /* 125 * n */
+#define MPUPLL_M_720 720 /* 125 * n */
+
+#define MPUPLL_N 23 /* (n -1 ) */
+#define MPUPLL_M2 1
+
+/* Core PLL Fdll = 1 GHZ, */
+#define COREPLL_M 1000 /* 125 * n */
+#define COREPLL_N 23 /* (n -1 ) */
+
+#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */
+#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */
+#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */
+
+/*
+ * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll
+ * frequency needs to be set to 960 MHZ. Hence,
+ * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
+ */
+#define PERPLL_M 960
+#define PERPLL_N 23
+#define PERPLL_M2 5
+
+/* DDR Freq is 166 MHZ for now*/
+/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
+//#if (CONFIG_AM335X_EVM_IS_13x13 == 1)
+#if 0
+#define DDRPLL_M 166 /* M/N + 1 = 25/3 */
+#else
+#define DDRPLL_M 266
+#endif
+
+#define DDRPLL_N 23
+#define DDRPLL_M2 1
+
+/* PRCM */
+/* Module Offsets */
+#define CM_PER (AM33XX_PRM_BASE + 0x0)
+#define CM_WKUP (AM33XX_PRM_BASE + 0x400)
+#define CM_DPLL (AM33XX_PRM_BASE + 0x500)
+#define CM_DEVICE (AM33XX_PRM_BASE + 0x0700)
+#define CM_CEFUSE (AM33XX_PRM_BASE + 0x0A00)
+#define PRM_DEVICE (AM33XX_PRM_BASE + 0x0F00)
+/* Register Offsets */
+/* Core PLL ADPLLS */
+#define CM_CLKSEL_DPLL_CORE (CM_WKUP + 0x68)
+#define CM_CLKMODE_DPLL_CORE (CM_WKUP + 0x90)
+
+/* Core HSDIV */
+#define CM_DIV_M4_DPLL_CORE (CM_WKUP + 0x80)
+#define CM_DIV_M5_DPLL_CORE (CM_WKUP + 0x84)
+#define CM_DIV_M6_DPLL_CORE (CM_WKUP + 0xD8)
+#define CM_IDLEST_DPLL_CORE (CM_WKUP + 0x5c)
+
+/* Peripheral PLL */
+#define CM_CLKSEL_DPLL_PER (CM_WKUP + 0x9c)
+#define CM_CLKMODE_DPLL_PER (CM_WKUP + 0x8c)
+#define CM_DIV_M2_DPLL_PER (CM_WKUP + 0xAC)
+#define CM_IDLEST_DPLL_PER (CM_WKUP + 0x70)
+
+/* Display PLL */
+#define CM_CLKSEL_DPLL_DISP (CM_WKUP + 0x54)
+#define CM_CLKMODE_DPLL_DISP (CM_WKUP + 0x98)
+#define CM_DIV_M2_DPLL_DISP (CM_WKUP + 0xA4)
+
+/* DDR PLL */
+#define CM_CLKSEL_DPLL_DDR (CM_WKUP + 0x40)
+#define CM_CLKMODE_DPLL_DDR (CM_WKUP + 0x94)
+#define CM_DIV_M2_DPLL_DDR (CM_WKUP + 0xA0)
+#define CM_IDLEST_DPLL_DDR (CM_WKUP + 0x34)
+
+/* MPU PLL */
+#define CM_CLKSEL_DPLL_MPU (CM_WKUP + 0x2c)
+#define CM_CLKMODE_DPLL_MPU (CM_WKUP + 0x88)
+#define CM_DIV_M2_DPLL_MPU (CM_WKUP + 0xA8)
+#define CM_IDLEST_DPLL_MPU (CM_WKUP + 0x20)
+
+/* TIMER Clock Source Select */
+#define CLKSEL_TIMER2_CLK (CM_DPLL + 0x8)
+
+/* Interconnect clocks */
+#define CM_PER_L4LS_CLKCTRL (CM_PER + 0x60) /* EMIF */
+#define CM_PER_L4FW_CLKCTRL (CM_PER + 0x64) /* EMIF FW */
+#define CM_PER_L3_CLKCTRL (CM_PER + 0xE0) /* OCMC RAM */
+#define CM_PER_L3_INSTR_CLKCTRL (CM_PER + 0xDC)
+#define CM_PER_L4HS_CLKCTRL (CM_PER + 0x120)
+#define CM_WKUP_L4WKUP_CLKCTRL (CM_WKUP + 0x0c)/* UART0 */
+
+/* Domain Wake UP */
+#define CM_WKUP_CLKSTCTRL (CM_WKUP + 0) /* UART0 */
+#define CM_PER_L4LS_CLKSTCTRL (CM_PER + 0x0) /* TIMER2 */
+#define CM_PER_L3_CLKSTCTRL (CM_PER + 0x0c) /* EMIF */
+#define CM_PER_L4FW_CLKSTCTRL (CM_PER + 0x08) /* EMIF FW */
+#define CM_PER_L3S_CLKSTCTRL (CM_PER + 0x4)
+#define CM_PER_L4HS_CLKSTCTRL (CM_PER + 0x011c)
+#define CM_CEFUSE_CLKSTCTRL (CM_CEFUSE + 0x0)
+
+/* Module Enable Registers */
+#define CM_PER_TIMER2_CLKCTRL (CM_PER + 0x80) /* Timer2 */
+#define CM_WKUP_UART0_CLKCTRL (CM_WKUP + 0xB4)/* UART0 */
+#define CM_WKUP_CONTROL_CLKCTRL (CM_WKUP + 0x4) /* Control Module */
+#define CM_PER_EMIF_CLKCTRL (CM_PER + 0x28) /* EMIF */
+#define CM_PER_EMIF_FW_CLKCTRL (CM_PER + 0xD0) /* EMIF FW */
+#define CM_PER_GPMC_CLKCTRL (CM_PER + 0x30) /* GPMC */
+#define CM_PER_ELM_CLKCTRL (CM_PER + 0x40) /* ELM */
+#define CM_PER_SPI0_CLKCTRL (CM_PER + 0x4c) /* SPI0 */
+#define CM_PER_SPI1_CLKCTRL (CM_PER + 0x50) /* SPI1 */
+#define CM_WKUP_I2C0_CLKCTRL (CM_WKUP + 0xB8) /* I2C0 */
+#define CM_PER_CPGMAC0_CLKCTRL (CM_PER + 0x14) /* Ethernet */
+#define CM_PER_CPSW_CLKSTCTRL (CM_PER + 0x144)/* Ethernet */
+#define CM_PER_OCMCRAM_CLKCTRL (CM_PER + 0x2C) /* OCMC RAM */
+#define CM_PER_GPIO2_CLKCTRL (CM_PER + 0xB0) /* GPIO2 */
+#define CM_PER_UART3_CLKCTRL (CM_PER + 0x74) /* UART3 */
+#define CM_PER_I2C1_CLKCTRL (CM_PER + 0x48) /* I2C1 */
+#define CM_PER_I2C2_CLKCTRL (CM_PER + 0x44) /* I2C2 */
+#define CM_WKUP_GPIO0_CLKCTRL (CM_WKUP + 0x8) /* GPIO0 */
+
+#define CM_PER_MMC0_CLKCTRL (CM_PER + 0x3C)
+#define CM_PER_MMC1_CLKCTRL (CM_PER + 0xF4)
+#define CM_PER_MMC2_CLKCTRL (CM_PER + 0xF8)
+
+/* PRCM */
+#define CM_DPLL_OFFSET (AM33XX_PRM_BASE + 0x0300)
+
+#define CM_ALWON_WDTIMER_CLKCTRL (AM33XX_PRM_BASE + 0x158C)
+#define CM_ALWON_SPI_CLKCTRL (AM33XX_PRM_BASE + 0x1590)
+#define CM_ALWON_CONTROL_CLKCTRL (AM33XX_PRM_BASE + 0x15C4)
+
+#define CM_ALWON_L3_SLOW_CLKSTCTRL (AM33XX_PRM_BASE + 0x1400)
+
+#define CM_ALWON_GPIO_0_CLKCTRL (AM33XX_PRM_BASE + 0x155c)
+#define CM_ALWON_GPIO_0_OPTFCLKEN_DBCLK (AM33XX_PRM_BASE + 0x155c)
+
+/* Ethernet */
+#define CM_ETHERNET_CLKSTCTRL (AM33XX_PRM_BASE + 0x1404)
+#define CM_ALWON_ETHERNET_0_CLKCTRL (AM33XX_PRM_BASE + 0x15D4)
+#define CM_ALWON_ETHERNET_1_CLKCTRL (AM33XX_PRM_BASE + 0x15D8)
+
+/* UARTs */
+#define CM_ALWON_UART_0_CLKCTRL (AM33XX_PRM_BASE + 0x1550)
+#define CM_ALWON_UART_1_CLKCTRL (AM33XX_PRM_BASE + 0x1554)
+#define CM_ALWON_UART_2_CLKCTRL (AM33XX_PRM_BASE + 0x1558)
+
+/* I2C */
+/* Note: In ti814x I2C0 and I2C2 have common clk control */
+#define CM_ALWON_I2C_0_CLKCTRL (AM33XX_PRM_BASE + 0x1564)
+
+/* EMIF4 PRCM Defintion */
+#define CM_DEFAULT_L3_FAST_CLKSTCTRL (AM33XX_PRM_BASE + 0x0508)
+#define CM_DEFAULT_EMIF_0_CLKCTRL (AM33XX_PRM_BASE + 0x0520)
+#define CM_DEFAULT_EMIF_1_CLKCTRL (AM33XX_PRM_BASE + 0x0524)
+#define CM_DEFAULT_DMM_CLKCTRL (AM33XX_PRM_BASE + 0x0528)
+#define CM_DEFAULT_FW_CLKCTRL (AM33XX_PRM_BASE + 0x052C)
+
+/* ALWON PRCM */
+#define CM_ALWON_OCMC_0_CLKSTCTRL CM_PER_L3_CLKSTCTRL
+#define CM_ALWON_OCMC_0_CLKCTRL CM_PER_OCMCRAM_CLKCTRL
+
+#define CM_ALWON_GPMC_CLKCTRL CM_PER_GPMC_CLKCTRL
+
+extern void pll_init(void);
+extern void enable_ddr_clocks(void);
#endif /* endif _AM33XX_CLOCKS_H_ */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-devices.h b/arch/arm/mach-omap/include/mach/am33xx-devices.h
new file mode 100644
index 0000000..cfb931f
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/am33xx-devices.h
@@ -0,0 +1,32 @@
+#ifndef __MACH_OMAP3_DEVICES_H
+#define __MACH_OMAP3_DEVICES_H
+
+#include <driver.h>
+#include <sizes.h>
+#include <mach/am33xx-silicon.h>
+#include <mach/devices.h>
+#include <mach/omap_hsmmc.h>
+
+/* the device numbering is the same as in the TRM memory map (SPRUH73G) */
+
+static inline struct device_d *am33xx_add_uart0(void)
+{
+ return omap_add_uart(0, AM33XX_UART0_BASE);
+}
+
+static inline struct device_d *am33xx_add_uart1(void)
+{
+ return omap_add_uart(1, AM33XX_UART1_BASE);
+}
+
+static inline struct device_d *am33xx_add_uart2(void)
+{
+ return omap_add_uart(2, AM33XX_UART2_BASE);
+}
+
+static inline struct device_d *am33xx_add_mmc0(struct omap_hsmmc_platform_data *pdata)
+{
+ return omap_add_mmc(0, AM33XX_MMCHS0_BASE, pdata);
+}
+
+#endif /* __MACH_OMAP3_DEVICES_H */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-mux.h b/arch/arm/mach-omap/include/mach/am33xx-mux.h
new file mode 100644
index 0000000..ed328f5
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/am33xx-mux.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __AM33XX_MUX_H__
+#define __AM33XX_MUX_H__
+
+extern void enable_mii1_pin_mux(void);
+extern void enable_i2c0_pin_mux(void);
+extern void enable_i2c1_pin_mux(void);
+extern void enable_i2c2_pin_mux(void);
+extern void enable_uart0_pin_mux(void);
+
+#endif /*__AM33XX_MUX_H__ */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index 090489c..b46a2d7 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -22,6 +22,8 @@
#define AM33XX_L4_PER_BASE 0x48000000
#define AM33XX_L4_FAST_BASE 0x4A000000
+/* the device numbering is the same as in the TRM memory map (SPRUH73G) */
+
/* UART */
#define AM33XX_UART0_BASE (AM33XX_L4_WKUP_BASE + 0x209000)
#define AM33XX_UART1_BASE (AM33XX_L4_PER_BASE + 0x22000)
@@ -45,5 +47,118 @@
/* PRM */
#define AM33XX_PRM_BASE (AM33XX_L4_WKUP_BASE + 0x200000)
+#define AM33XX_PRM_RSTCTRL (AM33XX_PRM_BASE + 0x0f00)
+#define AM33XX_PRM_RSTCTRL_RESET 0x1
+
+/* CTRL */
+#define AM33XX_CTRL_BASE (AM33XX_L4_WKUP_BASE + 0x210000)
+
+/* Watchdog Timer */
+#define AM33XX_WDT_BASE 0x44E35000
+
+/* EMIF Base address */
+#define AM33XX_EMIF4_0_CFG_BASE 0x4C000000
+#define AM33XX_EMIF4_1_CFG_BASE 0x4D000000
+#define AM33XX_DMM_BASE 0x4E000000
+
+#define AM335X_CPSW_BASE 0x4A100000
+#define AM335X_CPSW_MDIO_BASE 0x4A101000
+
+/*DMM & EMIF4 MMR Declaration*/
+#define AM33XX_DMM_LISA_MAP__0 (AM33XX_DMM_BASE + 0x40)
+#define AM33XX_DMM_LISA_MAP__1 (AM33XX_DMM_BASE + 0x44)
+#define AM33XX_DMM_LISA_MAP__2 (AM33XX_DMM_BASE + 0x48)
+#define AM33XX_DMM_LISA_MAP__3 (AM33XX_DMM_BASE + 0x4C)
+#define AM33XX_DMM_PAT_BASE_ADDR (AM33XX_DMM_BASE + 0x460)
+
+#define AM33XX_EMIF4_0_REG(REGNAME) (AM33XX_EMIF4_0_CFG_BASE + EMIF4_##REGNAME)
+#define AM33XX_EMIF4_1_REG(REGNAME) (AM33XX_EMIF4_1_CFG_BASE + EMIF4_##REGNAME)
+
+#define EMIF4_MOD_ID_REV 0x0
+#define EMIF4_SDRAM_STATUS 0x04
+#define EMIF4_SDRAM_CONFIG 0x08
+#define EMIF4_SDRAM_CONFIG2 0x0C
+#define EMIF4_SDRAM_REF_CTRL 0x10
+#define EMIF4_SDRAM_REF_CTRL_SHADOW 0x14
+#define EMIF4_SDRAM_TIM_1 0x18
+#define EMIF4_SDRAM_TIM_1_SHADOW 0x1C
+#define EMIF4_SDRAM_TIM_2 0x20
+#define EMIF4_SDRAM_TIM_2_SHADOW 0x24
+#define EMIF4_SDRAM_TIM_3 0x28
+#define EMIF4_SDRAM_TIM_3_SHADOW 0x2C
+#define EMIF0_SDRAM_MGMT_CTRL 0x38
+#define EMIF0_SDRAM_MGMT_CTRL_SHD 0x3C
+#define EMIF4_DDR_PHY_CTRL_1 0xE4
+#define EMIF4_DDR_PHY_CTRL_1_SHADOW 0xE8
+#define EMIF4_DDR_PHY_CTRL_2 0xEC
+#define EMIF4_IODFT_TLGC 0x60
+
+#define AM33XX_VTP0_CTRL_REG 0x44E10E0C
+#define AM33XX_VTP1_CTRL_REG 0x48140E10
+
+/* OCMC */
+#define AM33XX_SRAM0_SIZE (0x1B400) /* 109 KB */
+#define AM33XX_SRAM_GPMC_STACK_SIZE (0x40)
+
+#define AM33XX_LOW_LEVEL_SRAM_STACK (AM33XX_SRAM0_START + AM33XX_SRAM0_SIZE - 4)
+
+/* DDR offsets */
+#define AM33XX_DDR_PHY_BASE_ADDR 0x44E12000
+#define AM33XX_DDR_IO_CTRL 0x44E10E04
+#define AM33XX_DDR_CKE_CTRL 0x44E1131C
+#define AM33XX_CONTROL_BASE_ADDR 0x44E10000
+
+#define AM33XX_DDR_CMD0_IOCTRL (AM33XX_CONTROL_BASE_ADDR + 0x1404)
+#define AM33XX_DDR_CMD1_IOCTRL (AM33XX_CONTROL_BASE_ADDR + 0x1408)
+#define AM33XX_DDR_CMD2_IOCTRL (AM33XX_CONTROL_BASE_ADDR + 0x140C)
+#define AM33XX_DDR_DATA0_IOCTRL (AM33XX_CONTROL_BASE_ADDR + 0x1440)
+#define AM33XX_DDR_DATA1_IOCTRL (AM33XX_CONTROL_BASE_ADDR + 0x1444)
+
+#define AM33XX_CMD0_CTRL_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x01C)
+#define AM33XX_CMD0_CTRL_SLAVE_FORCE_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x020)
+#define AM33XX_CMD0_CTRL_SLAVE_DELAY_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x024)
+#define AM33XX_CMD0_DLL_LOCK_DIFF_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x028)
+#define AM33XX_CMD0_INVERT_CLKOUT_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x02C)
+
+#define AM33XX_CMD1_CTRL_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x050)
+#define AM33XX_CMD1_CTRL_SLAVE_FORCE_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x054)
+#define AM33XX_CMD1_CTRL_SLAVE_DELAY_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x058)
+#define AM33XX_CMD1_DLL_LOCK_DIFF_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x05C)
+#define AM33XX_CMD1_INVERT_CLKOUT_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x060)
+
+#define AM33XX_CMD2_CTRL_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x084)
+#define AM33XX_CMD2_CTRL_SLAVE_FORCE_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x088)
+#define AM33XX_CMD2_CTRL_SLAVE_DELAY_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x08C)
+#define AM33XX_CMD2_DLL_LOCK_DIFF_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x090)
+#define AM33XX_CMD2_INVERT_CLKOUT_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x094)
+
+#define AM33XX_DATA0_RD_DQS_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x0C8)
+#define AM33XX_DATA0_RD_DQS_SLAVE_RATIO_1 (AM33XX_DDR_PHY_BASE_ADDR + 0x0CC)
+#define AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x0DC)
+
+#define AM33XX_DATA0_WR_DQS_SLAVE_RATIO_1 (AM33XX_DDR_PHY_BASE_ADDR + 0x0E0)
+#define AM33XX_DATA0_WRLVL_INIT_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x0F0)
+
+#define AM33XX_DATA0_WRLVL_INIT_RATIO_1 (AM33XX_DDR_PHY_BASE_ADDR + 0x0F4)
+#define AM33XX_DATA0_GATELVL_INIT_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x0FC)
+
+#define AM33XX_DATA0_GATELVL_INIT_RATIO_1 (AM33XX_DDR_PHY_BASE_ADDR + 0x100)
+#define AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x108)
+
+#define AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_1 (AM33XX_DDR_PHY_BASE_ADDR + 0x10C)
+#define AM33XX_DATA0_WR_DATA_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x120)
+
+#define AM33XX_DATA0_WR_DATA_SLAVE_RATIO_1 (AM33XX_DDR_PHY_BASE_ADDR + 0x124)
+#define AM33XX_DATA0_DLL_LOCK_DIFF_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x138)
+
+#define AM33XX_DATA0_RANK0_DELAYS_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x134)
+#define AM33XX_DATA1_RANK0_DELAYS_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x1D8)
+
+/* Ethernet MAC ID from EFuse */
+#define AM33XX_MAC_ID0_LO (AM33XX_CTRL_BASE + 0x630)
+#define AM33XX_MAC_ID0_HI (AM33XX_CTRL_BASE + 0x634)
+#define AM33XX_MAC_ID1_LO (AM33XX_CTRL_BASE + 0x638)
+#define AM33XX_MAC_ID1_HI (AM33XX_CTRL_BASE + 0x63c)
+#define AM33XX_MAC_MII_SEL (AM33XX_CTRL_BASE + 0x650)
#endif
diff --git a/arch/arm/mach-omap/include/mach/wdt.h b/arch/arm/mach-omap/include/mach/wdt.h
index 5f3bb60..9a5288d 100644
--- a/arch/arm/mach-omap/include/mach/wdt.h
+++ b/arch/arm/mach-omap/include/mach/wdt.h
@@ -22,6 +22,8 @@
/** Watchdog Register defines */
#define OMAP3_WDT_REG(REGNAME) (OMAP3_MPU_WDTIMER_BASE + OMAP_WDT_##REGNAME)
+#define AM33XX_WDT_REG(REGNAME) (AM33XX_WDT_BASE + OMAP_WDT_##REGNAME)
+
#define OMAP_WDT_WIDR (0x000)
#define OMAP_WDT_SYSCONFIG (0x010)
#define OMAP_WDT_WD_SYSSTATUS (0x014)
diff --git a/arch/arm/mach-omap/include/mach/xload.h b/arch/arm/mach-omap/include/mach/xload.h
index 44d3754..d632735 100644
--- a/arch/arm/mach-omap/include/mach/xload.h
+++ b/arch/arm/mach-omap/include/mach/xload.h
@@ -9,6 +9,7 @@ enum omap_boot_src {
OMAP_BOOTSRC_USB1,
};
+enum omap_boot_src am33xx_bootsrc(void);
enum omap_boot_src omap3_bootsrc(void);
enum omap_boot_src omap4_bootsrc(void);
diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
index 240d3ff..47c5d98 100644
--- a/arch/arm/mach-omap/xload.c
+++ b/arch/arm/mach-omap/xload.c
@@ -163,6 +163,8 @@ enum omap_boot_src omap_bootsrc(void)
return omap3_bootsrc();
#elif defined(CONFIG_ARCH_OMAP4)
return omap4_bootsrc();
+#elif defined(CONFIG_ARCH_AM33XX)
+ return am33xx_bootsrc();
#endif
}
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH 19/19] drivers: net: add driver for TI CPSW
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
` (17 preceding siblings ...)
2012-12-18 14:22 ` [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board Jan Luebbe
@ 2012-12-18 14:22 ` Jan Luebbe
2012-12-19 21:11 ` Sascha Hauer
18 siblings, 1 reply; 22+ messages in thread
From: Jan Luebbe @ 2012-12-18 14:22 UTC (permalink / raw)
To: barebox
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/beaglebone/board.c | 80 +++
arch/arm/mach-omap/include/mach/cpsw.h | 49 ++
drivers/net/Kconfig | 4 +
drivers/net/Makefile | 1 +
drivers/net/cpsw.c | 1021 ++++++++++++++++++++++++++++++++
5 files changed, 1155 insertions(+)
create mode 100644 arch/arm/mach-omap/include/mach/cpsw.h
create mode 100644 drivers/net/cpsw.c
diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
index d139e94..20b4bdd 100644
--- a/arch/arm/boards/beaglebone/board.c
+++ b/arch/arm/boards/beaglebone/board.c
@@ -31,6 +31,7 @@
#include <sizes.h>
#include <io.h>
#include <ns16550.h>
+#include <net.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <mach/am33xx-silicon.h>
@@ -42,6 +43,7 @@
#include <mach/ehci.h>
#include <i2c/i2c.h>
#include <linux/err.h>
+#include <linux/phy.h>
#include <usb/ehci.h>
#include <mach/xload.h>
#include <mach/am33xx-devices.h>
@@ -306,6 +308,84 @@ static int beaglebone_console_init(void)
console_initcall(beaglebone_console_init);
#endif /* CONFIG_DRIVER_SERIAL_NS16550 */
+#ifdef CONFIG_DRIVER_NET_CPSW
+static void cpsw_control(int enabled)
+{
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_id = 0,
+ .phy_if = PHY_INTERFACE_MODE_MII,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_id = 1,
+ .phy_if = PHY_INTERFACE_MODE_MII,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = AM335X_CPSW_MDIO_BASE,
+ .cpsw_base = AM335X_CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 2,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .mac_control = (1 << 5) /* MIIEN */,
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+static int beaglebone_eth_init(void)
+{
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+
+ mac_lo = readl(AM33XX_MAC_ID0_LO);
+ mac_hi = readl(AM33XX_MAC_ID0_HI);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+ if (is_valid_ether_addr(mac_addr))
+ eth_register_ethaddr(0, mac_addr);
+
+ mac_lo = readl(AM33XX_MAC_ID1_LO);
+ mac_hi = readl(AM33XX_MAC_ID1_HI);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+ if (is_valid_ether_addr(mac_addr))
+ eth_register_ethaddr(1, mac_addr);
+
+ writel(0, AM33XX_MAC_MII_SEL);
+
+ enable_mii1_pin_mux();
+
+ add_generic_device("cpsw", 0, NULL, AM335X_CPSW_BASE, SZ_4K,
+ IORESOURCE_MEM, &cpsw_data);
+
+ return 0;
+}
+device_initcall(beaglebone_eth_init);
+#endif
+
static int beaglebone_mem_init(void)
{
arm_add_mem_device("ram0", 0x80000000, 256 * 1024 * 1024);
diff --git a/arch/arm/mach-omap/include/mach/cpsw.h b/arch/arm/mach-omap/include/mach/cpsw.h
new file mode 100644
index 0000000..c101c93
--- /dev/null
+++ b/arch/arm/mach-omap/include/mach/cpsw.h
@@ -0,0 +1,49 @@
+/*
+ * CPSW Ethernet Switch Driver
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CPSW_H_
+#define _CPSW_H_
+
+struct cpsw_slave_data {
+ u32 slave_reg_ofs;
+ u32 sliver_reg_ofs;
+ int phy_id;
+ int phy_if;
+};
+
+enum {
+ CPSW_CTRL_VERSION_1 = 0,
+ CPSW_CTRL_VERSION_2 /* am33xx like devices */
+};
+
+struct cpsw_platform_data {
+ u32 mdio_base;
+ u32 cpsw_base;
+ int mdio_div;
+ int channels; /* number of cpdma channels (symmetric) */
+ u32 cpdma_reg_ofs; /* cpdma register offset */
+ int slaves; /* number of slave cpgmac ports */
+ u32 ale_reg_ofs; /* address lookup engine reg offset */
+ int ale_entries; /* ale table size */
+ u32 host_port_reg_ofs; /* cpdma host port registers */
+ u32 hw_stats_reg_ofs; /* cpsw hw stats counters */
+ u32 mac_control;
+ struct cpsw_slave_data *slave_data;
+ void (*control)(int enabled);
+ u32 host_port_num;
+ u8 version;
+};
+
+#endif /* _CPSW_H_ */
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 43d5984..cf6ceee 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -31,6 +31,10 @@ config DRIVER_NET_CS8900
bool "cs8900 ethernet driver"
depends on HAS_CS8900
+config DRIVER_NET_CPSW
+ bool "CPSW ethernet driver"
+ select PHYLIB
+
config DRIVER_NET_SMC911X
bool "smc911x ethernet driver"
select PHYLIB
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4e6b49b..6e1aeaa 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o
+obj-$(CONFIG_DRIVER_NET_CPSW) += cpsw.o
obj-$(CONFIG_DRIVER_NET_SMC911X) += smc911x.o
obj-$(CONFIG_DRIVER_NET_SMC91111) += smc91111.o
obj-$(CONFIG_DRIVER_NET_DAVINCI_EMAC) += davinci_emac.o
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
new file mode 100644
index 0000000..69639ff
--- /dev/null
+++ b/drivers/net/cpsw.c
@@ -0,0 +1,1021 @@
+/*
+ * CPSW Ethernet Switch Driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+#include <net.h>
+#include <linux/phy.h>
+#include <errno.h>
+#include <io.h>
+#include <xfuncs.h>
+#include <asm/mmu.h>
+#include <asm/system.h>
+
+#include <mach/cpsw.h>
+
+#define BITMASK(bits) ((1 << (bits)) - 1)
+#define PHY_REG_MASK 0x1f
+#define PHY_ID_MASK 0x1f
+#define NUM_DESCS (PKTBUFSRX * 2)
+#define PKT_MIN 60
+#define PKT_MAX (1500 + 14 + 4 + 4)
+
+/* DMA Registers */
+#define CPDMA_TXCONTROL 0x004
+#define CPDMA_RXCONTROL 0x014
+#define CPDMA_SOFTRESET 0x01c
+#define CPDMA_RXFREE 0x0e0
+#define CPDMA_TXHDP_VER1 0x100
+#define CPDMA_TXHDP_VER2 0x200
+#define CPDMA_RXHDP_VER1 0x120
+#define CPDMA_RXHDP_VER2 0x220
+#define CPDMA_TXCP_VER1 0x140
+#define CPDMA_TXCP_VER2 0x240
+#define CPDMA_RXCP_VER1 0x160
+#define CPDMA_RXCP_VER2 0x260
+
+#define CPDMA_RAM_ADDR 0x4a102000
+
+/* Descriptor mode bits */
+#define CPDMA_DESC_SOP BIT(31)
+#define CPDMA_DESC_EOP BIT(30)
+#define CPDMA_DESC_OWNER BIT(29)
+#define CPDMA_DESC_EOQ BIT(28)
+
+struct cpsw_mdio_regs {
+ u32 version;
+ u32 control;
+#define CONTROL_IDLE (1 << 31)
+#define CONTROL_ENABLE (1 << 30)
+
+ u32 alive;
+ u32 link;
+ u32 linkintraw;
+ u32 linkintmasked;
+ u32 __reserved_0[2];
+ u32 userintraw;
+ u32 userintmasked;
+ u32 userintmaskset;
+ u32 userintmaskclr;
+ u32 __reserved_1[20];
+
+ struct {
+ u32 access;
+ u32 physel;
+#define USERACCESS_GO (1 << 31)
+#define USERACCESS_WRITE (1 << 30)
+#define USERACCESS_ACK (1 << 29)
+#define USERACCESS_READ (0)
+#define USERACCESS_DATA (0xffff)
+ } user[0];
+};
+
+struct cpsw_regs {
+ u32 id_ver;
+ u32 control;
+ u32 soft_reset;
+ u32 stat_port_en;
+ u32 ptype;
+};
+
+struct cpsw_slave_regs {
+ u32 max_blks;
+ u32 blk_cnt;
+ u32 flow_thresh;
+ u32 port_vlan;
+ u32 tx_pri_map;
+#ifdef CONFIG_TI814X
+ u32 ts_ctl;
+ u32 ts_seq_ltype;
+ u32 ts_vlan;
+#endif
+ u32 sa_lo;
+ u32 sa_hi;
+};
+
+struct cpsw_host_regs {
+ u32 max_blks;
+ u32 blk_cnt;
+ u32 flow_thresh;
+ u32 port_vlan;
+ u32 tx_pri_map;
+ u32 cpdma_tx_pri_map;
+ u32 cpdma_rx_chan_map;
+};
+
+struct cpsw_sliver_regs {
+ u32 id_ver;
+ u32 mac_control;
+ u32 mac_status;
+ u32 soft_reset;
+ u32 rx_maxlen;
+ u32 __reserved_0;
+ u32 rx_pause;
+ u32 tx_pause;
+ u32 __reserved_1;
+ u32 rx_pri_map;
+};
+
+#define ALE_ENTRY_BITS 68
+#define ALE_ENTRY_WORDS DIV_ROUND_UP(ALE_ENTRY_BITS, 32)
+
+/* ALE Registers */
+#define ALE_CONTROL 0x08
+#define ALE_UNKNOWNVLAN 0x18
+#define ALE_TABLE_CONTROL 0x20
+#define ALE_TABLE 0x34
+#define ALE_PORTCTL 0x40
+
+#define ALE_TABLE_WRITE BIT(31)
+
+#define ALE_TYPE_FREE 0
+#define ALE_TYPE_ADDR 1
+#define ALE_TYPE_VLAN 2
+#define ALE_TYPE_VLAN_ADDR 3
+
+#define ALE_UCAST_PERSISTANT 0
+#define ALE_UCAST_UNTOUCHED 1
+#define ALE_UCAST_OUI 2
+#define ALE_UCAST_TOUCHED 3
+
+#define ALE_MCAST_FWD 0
+#define ALE_MCAST_BLOCK_LEARN_FWD 1
+#define ALE_MCAST_FWD_LEARN 2
+#define ALE_MCAST_FWD_2 3
+
+enum cpsw_ale_port_state {
+ ALE_PORT_STATE_DISABLE = 0x00,
+ ALE_PORT_STATE_BLOCK = 0x01,
+ ALE_PORT_STATE_LEARN = 0x02,
+ ALE_PORT_STATE_FORWARD = 0x03,
+};
+
+/* ALE unicast entry flags - passed into cpsw_ale_add_ucast() */
+#define ALE_SECURE 1
+#define ALE_BLOCKED 2
+
+struct cpsw_slave {
+ struct cpsw_slave_regs *regs;
+ struct cpsw_sliver_regs *sliver;
+ int slave_num;
+ u32 mac_control;
+ struct cpsw_slave_data *data;
+};
+
+struct cpdma_desc {
+ /* hardware fields */
+ u32 hw_next;
+ u32 hw_buffer;
+ u32 hw_len;
+ u32 hw_mode;
+ /* software fields */
+ u32 sw_buffer;
+ u32 sw_len;
+};
+
+struct cpdma_chan {
+ struct cpdma_desc *head, *tail;
+ void *hdp, *cp, *rxfree;
+};
+
+#define desc_write(desc, fld, val) __raw_writel((u32)(val), &(desc)->fld)
+#define desc_read(desc, fld) __raw_readl(&(desc)->fld)
+#define desc_read_ptr(desc, fld) ((void *)__raw_readl(&(desc)->fld))
+
+#define chan_write(chan, fld, val) __raw_writel((u32)(val), (chan)->fld)
+#define chan_read(chan, fld) __raw_readl((chan)->fld)
+#define chan_read_ptr(chan, fld) ((void *)__raw_readl((chan)->fld))
+
+struct cpsw_priv {
+ struct device_d *dev;
+ struct eth_device edev;
+ struct mii_bus miibus;
+
+ struct cpsw_platform_data data;
+ int host_port;
+ uint8_t mac_addr[6];
+
+ struct cpsw_regs *regs;
+ void *dma_regs;
+ struct cpsw_host_regs *host_port_regs;
+ void *ale_regs;
+
+ struct cpdma_desc *descs;
+ struct cpdma_desc *desc_free;
+ struct cpdma_chan rx_chan, tx_chan;
+
+ struct cpsw_slave *slaves;
+#define for_each_slave(priv, func, arg...) \
+ do { \
+ int idx; \
+ for (idx = 0; idx < (priv)->data.slaves; idx++) \
+ (func)((priv)->slaves + idx, ##arg); \
+ } while (0)
+};
+
+static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits)
+{
+ int idx;
+
+ idx = start / 32;
+ start -= idx * 32;
+ idx = 2 - idx; /* flip */
+ return (ale_entry[idx] >> start) & BITMASK(bits);
+}
+
+static inline void cpsw_ale_set_field(u32 *ale_entry, u32 start, u32 bits,
+ u32 value)
+{
+ int idx;
+
+ value &= BITMASK(bits);
+ idx = start / 32;
+ start -= idx * 32;
+ idx = 2 - idx; /* flip */
+ ale_entry[idx] &= ~(BITMASK(bits) << start);
+ ale_entry[idx] |= (value << start);
+}
+
+#define DEFINE_ALE_FIELD(name, start, bits) \
+static inline int cpsw_ale_get_##name(u32 *ale_entry) \
+{ \
+ return cpsw_ale_get_field(ale_entry, start, bits); \
+} \
+static inline void cpsw_ale_set_##name(u32 *ale_entry, u32 value) \
+{ \
+ cpsw_ale_set_field(ale_entry, start, bits, value); \
+}
+
+DEFINE_ALE_FIELD(entry_type, 60, 2)
+DEFINE_ALE_FIELD(mcast_state, 62, 2)
+DEFINE_ALE_FIELD(port_mask, 66, 3)
+DEFINE_ALE_FIELD(ucast_type, 62, 2)
+DEFINE_ALE_FIELD(port_num, 66, 2)
+DEFINE_ALE_FIELD(blocked, 65, 1)
+DEFINE_ALE_FIELD(secure, 64, 1)
+DEFINE_ALE_FIELD(mcast, 40, 1)
+
+char ethbdaddr [6] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+/* The MAC address field in the ALE entry cannot be macroized as above */
+static inline void cpsw_ale_get_addr(u32 *ale_entry, u8 *addr)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ addr[i] = cpsw_ale_get_field(ale_entry, 40 - 8*i, 8);
+}
+
+static inline void cpsw_ale_set_addr(u32 *ale_entry, u8 *addr)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ cpsw_ale_set_field(ale_entry, 40 - 8*i, 8, addr[i]);
+}
+
+static int cpsw_ale_read(struct cpsw_priv *priv, int idx, u32 *ale_entry)
+{
+ int i;
+
+ __raw_writel(idx, priv->ale_regs + ALE_TABLE_CONTROL);
+
+ for (i = 0; i < ALE_ENTRY_WORDS; i++)
+ ale_entry[i] = __raw_readl(priv->ale_regs + ALE_TABLE + 4 * i);
+
+ return idx;
+}
+
+static int cpsw_ale_write(struct cpsw_priv *priv, int idx, u32 *ale_entry)
+{
+ int i;
+
+ for (i = 0; i < ALE_ENTRY_WORDS; i++)
+ __raw_writel(ale_entry[i], priv->ale_regs + ALE_TABLE + 4 * i);
+
+ __raw_writel(idx | ALE_TABLE_WRITE, priv->ale_regs + ALE_TABLE_CONTROL);
+
+ return idx;
+}
+
+static int cpsw_ale_match_addr(struct cpsw_priv *priv, u8* addr)
+{
+ u32 ale_entry[ALE_ENTRY_WORDS];
+ int type, idx;
+
+ for (idx = 0; idx < priv->data.ale_entries; idx++) {
+ u8 entry_addr[6];
+
+ cpsw_ale_read(priv, idx, ale_entry);
+ type = cpsw_ale_get_entry_type(ale_entry);
+ if (type != ALE_TYPE_ADDR && type != ALE_TYPE_VLAN_ADDR)
+ continue;
+ cpsw_ale_get_addr(ale_entry, entry_addr);
+ if (memcmp(entry_addr, addr, 6) == 0)
+ return idx;
+ }
+ return -ENOENT;
+}
+
+static int cpsw_ale_match_free(struct cpsw_priv *priv)
+{
+ u32 ale_entry[ALE_ENTRY_WORDS];
+ int type, idx;
+
+ for (idx = 0; idx < priv->data.ale_entries; idx++) {
+ cpsw_ale_read(priv, idx, ale_entry);
+ type = cpsw_ale_get_entry_type(ale_entry);
+ if (type == ALE_TYPE_FREE)
+ return idx;
+ }
+ return -ENOENT;
+}
+
+static int cpsw_ale_find_ageable(struct cpsw_priv *priv)
+{
+ u32 ale_entry[ALE_ENTRY_WORDS];
+ int type, idx;
+
+ for (idx = 0; idx < priv->data.ale_entries; idx++) {
+ cpsw_ale_read(priv, idx, ale_entry);
+ type = cpsw_ale_get_entry_type(ale_entry);
+ if (type != ALE_TYPE_ADDR && type != ALE_TYPE_VLAN_ADDR)
+ continue;
+ if (cpsw_ale_get_mcast(ale_entry))
+ continue;
+ type = cpsw_ale_get_ucast_type(ale_entry);
+ if (type != ALE_UCAST_PERSISTANT &&
+ type != ALE_UCAST_OUI)
+ return idx;
+ }
+ return -ENOENT;
+}
+
+static int cpsw_ale_add_ucast(struct cpsw_priv *priv, u8 *addr,
+ int port, int flags)
+{
+ u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0};
+ int idx;
+
+ cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_ADDR);
+ cpsw_ale_set_addr(ale_entry, addr);
+ cpsw_ale_set_ucast_type(ale_entry, ALE_UCAST_PERSISTANT);
+ cpsw_ale_set_secure(ale_entry, (flags & ALE_SECURE) ? 1 : 0);
+ cpsw_ale_set_blocked(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0);
+ cpsw_ale_set_port_num(ale_entry, port);
+
+ idx = cpsw_ale_match_addr(priv, addr);
+ if (idx < 0)
+ idx = cpsw_ale_match_free(priv);
+ if (idx < 0)
+ idx = cpsw_ale_find_ageable(priv);
+ if (idx < 0)
+ return -ENOMEM;
+
+ cpsw_ale_write(priv, idx, ale_entry);
+ return 0;
+}
+
+static int cpsw_ale_add_mcast(struct cpsw_priv *priv, u8 *addr, int port_mask)
+{
+ u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0};
+ int idx, mask;
+
+ idx = cpsw_ale_match_addr(priv, addr);
+ if (idx >= 0)
+ cpsw_ale_read(priv, idx, ale_entry);
+
+ cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_ADDR);
+ cpsw_ale_set_addr(ale_entry, addr);
+ cpsw_ale_set_mcast_state(ale_entry, ALE_MCAST_FWD_2);
+
+ mask = cpsw_ale_get_port_mask(ale_entry);
+ port_mask |= mask;
+ cpsw_ale_set_port_mask(ale_entry, port_mask);
+
+ if (idx < 0)
+ idx = cpsw_ale_match_free(priv);
+ if (idx < 0)
+ idx = cpsw_ale_find_ageable(priv);
+ if (idx < 0)
+ return -ENOMEM;
+
+ cpsw_ale_write(priv, idx, ale_entry);
+ return 0;
+}
+
+static inline void cpsw_ale_control(struct cpsw_priv *priv, int bit, int val)
+{
+ u32 tmp, mask = BIT(bit);
+
+ tmp = __raw_readl(priv->ale_regs + ALE_CONTROL);
+ tmp &= ~mask;
+ tmp |= val ? mask : 0;
+ __raw_writel(tmp, priv->ale_regs + ALE_CONTROL);
+}
+
+#define cpsw_ale_enable(priv, val) cpsw_ale_control(priv, 31, val)
+#define cpsw_ale_clear(priv, val) cpsw_ale_control(priv, 30, val)
+#define cpsw_ale_bypass(priv, val) cpsw_ale_control(priv, 4, val)
+#define cpsw_ale_vlan_aware(priv, val) cpsw_ale_control(priv, 2, val)
+
+static inline void cpsw_ale_port_state(struct cpsw_priv *priv, int port,
+ int val)
+{
+ int offset = ALE_PORTCTL + 4 * port;
+ u32 tmp, mask = 0x3;
+
+ tmp = __raw_readl(priv->ale_regs + offset);
+ tmp &= ~mask;
+ tmp |= val & 0x3;
+ __raw_writel(tmp, priv->ale_regs + offset);
+}
+
+static struct cpsw_mdio_regs *mdio_regs;
+
+/* wait until hardware is ready for another user access */
+static inline u32 wait_for_user_access(void)
+{
+ u32 tmp;
+
+ while ((tmp = __raw_readl(&mdio_regs->user[0].access)) & USERACCESS_GO)
+ ;
+
+ return tmp;
+}
+
+/* wait until hardware state machine is idle */
+static inline void wait_for_idle(void)
+{
+ while ((__raw_readl(&mdio_regs->control) & CONTROL_IDLE) == 0)
+ ;
+}
+
+static int cpsw_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg)
+{
+ u32 tmp;
+
+ if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
+ return -EINVAL;
+
+ wait_for_user_access();
+ tmp = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) |
+ (phy_id << 16));
+ __raw_writel(tmp, &mdio_regs->user[0].access);
+ tmp = wait_for_user_access();
+
+ return (tmp & USERACCESS_ACK) ? (tmp & USERACCESS_DATA) : -1;
+}
+
+static int cpsw_mdio_write(struct mii_bus *bus, int phy_id, int phy_reg, u16 value)
+{
+ u32 tmp;
+
+ if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
+ return -EINVAL;
+
+ wait_for_user_access();
+ tmp = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) |
+ (phy_id << 16) | (value & USERACCESS_DATA));
+ __raw_writel(tmp, &mdio_regs->user[0].access);
+ wait_for_user_access();
+
+ return 0;
+}
+
+static inline void soft_reset(void *reg)
+{
+ __raw_writel(1, reg);
+ while (__raw_readl(reg) & 1)
+ ;
+}
+
+#define mac_hi(mac) (((mac)[0] << 0) | ((mac)[1] << 8) | \
+ ((mac)[2] << 16) | ((mac)[3] << 24))
+#define mac_lo(mac) (((mac)[4] << 0) | ((mac)[5] << 8))
+
+static void cpsw_set_slave_mac(struct cpsw_slave *slave,
+ struct cpsw_priv *priv,
+ unsigned char *mac)
+{
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ __raw_writel(mac_hi(mac), &slave->regs->sa_hi);
+ __raw_writel(mac_lo(mac), &slave->regs->sa_lo);
+}
+
+static int cpsw_get_hwaddr(struct eth_device *edev, unsigned char *mac)
+{
+ struct cpsw_priv *priv = edev->priv;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ return -1;
+}
+
+static int cpsw_set_hwaddr(struct eth_device *edev, unsigned char *mac)
+{
+ struct cpsw_priv *priv = edev->priv;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ memcpy(&priv->mac_addr, mac, sizeof(priv->mac_addr));
+
+ for_each_slave(priv, cpsw_set_slave_mac, priv, mac);
+
+ return 0;
+}
+
+static void cpsw_slave_update_link(struct cpsw_slave *slave,
+ struct cpsw_priv *priv, int *link)
+{
+ struct phy_device *phydev = priv->edev.phydev;
+ u32 mac_control = 0;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ if (!phydev)
+ return;
+
+ if (slave->slave_num)
+ return;
+
+ if (phydev->link) {
+ *link = 1;
+ mac_control = priv->data.mac_control;
+ if (phydev->speed == SPEED_10)
+ mac_control |= BIT(18); /* In Band mode */
+ else if (phydev->speed == SPEED_100)
+ mac_control |= BIT(15);
+ else if (phydev->speed == SPEED_1000)
+ mac_control &= ~BIT(7); /* TODO: Do not enable
+ * gig support now */
+ if (phydev->duplex == DUPLEX_FULL)
+ mac_control |= BIT(0); /* FULLDUPLEXEN */
+ }
+
+ if (mac_control == slave->mac_control)
+ return;
+
+ if (mac_control) {
+ dev_dbg(priv->dev, "link up on port %d, speed %d, %s duplex\n",
+ slave->slave_num, phydev->speed,
+ (phydev->duplex == DUPLEX_FULL) ? "full" : "half");
+ } else {
+ dev_dbg(priv->dev, "link down on port %d\n", slave->slave_num);
+ }
+
+ __raw_writel(mac_control, &slave->sliver->mac_control);
+ slave->mac_control = mac_control;
+}
+
+static int cpsw_update_link(struct cpsw_priv *priv)
+{
+ int link = 0;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ for_each_slave(priv, cpsw_slave_update_link, priv, &link);
+ return link;
+}
+
+static void cpsw_adjust_link(struct eth_device *edev) {
+ struct cpsw_priv *priv = edev->priv;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ cpsw_update_link(priv);
+}
+
+static inline u32 cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num)
+{
+ if (priv->host_port == 0)
+ return slave_num + 1;
+ else
+ return slave_num;
+}
+
+static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv)
+{
+ u32 slave_port;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ soft_reset(&slave->sliver->soft_reset);
+
+ /* setup priority mapping */
+ __raw_writel(0x76543210, &slave->sliver->rx_pri_map);
+ __raw_writel(0x33221100, &slave->regs->tx_pri_map);
+
+ /* setup max packet size, and mac address */
+ __raw_writel(PKT_MAX, &slave->sliver->rx_maxlen);
+ //cpsw_set_slave_mac(slave, priv);
+
+ slave->mac_control = 0; /* no link yet */
+
+ /* enable forwarding */
+ slave_port = cpsw_get_slave_port(priv, slave->slave_num);
+ cpsw_ale_port_state(priv, slave_port, ALE_PORT_STATE_FORWARD);
+
+ /* add broadcast address */
+ cpsw_ale_add_mcast(priv, ethbdaddr, 1 << slave_port);
+}
+
+static struct cpdma_desc *cpdma_desc_alloc(struct cpsw_priv *priv)
+{
+ struct cpdma_desc *desc = priv->desc_free;
+
+ if (desc)
+ priv->desc_free = desc_read_ptr(desc, hw_next);
+ return desc;
+}
+
+static void cpdma_desc_free(struct cpsw_priv *priv, struct cpdma_desc *desc)
+{
+ if (desc) {
+ desc_write(desc, hw_next, priv->desc_free);
+ priv->desc_free = desc;
+ }
+}
+
+static int cpdma_submit(struct cpsw_priv *priv, struct cpdma_chan *chan,
+ volatile void *buffer, int len)
+{
+ struct cpdma_desc *desc, *prev;
+ u32 mode;
+
+ //dev_dbg(priv->dev, "* %s\n", __func__);
+
+ desc = cpdma_desc_alloc(priv);
+ if (!desc)
+ return -ENOMEM;
+
+ if (len < PKT_MIN)
+ len = PKT_MIN;
+
+ mode = CPDMA_DESC_OWNER | CPDMA_DESC_SOP | CPDMA_DESC_EOP;
+
+ desc_write(desc, hw_next, 0);
+ desc_write(desc, hw_buffer, buffer);
+ desc_write(desc, hw_len, len);
+ desc_write(desc, hw_mode, mode | len);
+ desc_write(desc, sw_buffer, buffer);
+ desc_write(desc, sw_len, len);
+
+ dev_dbg(priv->dev, "%s: submit addr=0x%p len=%i\n", __func__, buffer, len);
+
+ if (!chan->head) {
+ /* simple case - first packet enqueued */
+ chan->head = desc;
+ chan->tail = desc;
+ chan_write(chan, hdp, desc);
+ goto done;
+ }
+
+ /* not the first packet - enqueue at the tail */
+ prev = chan->tail;
+ desc_write(prev, hw_next, desc);
+ chan->tail = desc;
+
+ /* next check if EOQ has been triggered already */
+ if (desc_read(prev, hw_mode) & CPDMA_DESC_EOQ) {
+ chan_write(chan, hdp, desc);
+ }
+
+done:
+ if (chan->rxfree)
+ chan_write(chan, rxfree, 1);
+ return 0;
+}
+
+static int cpdma_process(struct cpsw_priv *priv, struct cpdma_chan *chan,
+ void **buffer, int *len)
+{
+ struct cpdma_desc *desc = chan->head;
+ u32 status;
+
+ if (!desc)
+ return -ENOENT;
+
+ status = desc_read(desc, hw_mode);
+
+ if (len)
+ *len = status & 0x7ff;
+
+ if (buffer)
+ *buffer = desc_read_ptr(desc, sw_buffer);
+
+ if (status & CPDMA_DESC_OWNER)
+ return -EBUSY;
+
+ chan->head = desc_read_ptr(desc, hw_next);
+ chan_write(chan, cp, desc);
+
+ cpdma_desc_free(priv, desc);
+ return 0;
+}
+
+static int cpsw_init(struct eth_device *edev)
+{
+ struct cpsw_priv *priv = edev->priv;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ return 0;
+}
+
+static int cpsw_open(struct eth_device *edev)
+{
+ struct cpsw_priv *priv = edev->priv;
+ struct cpsw_slave_data *slave_data = priv->data.slave_data;
+ int i, ret;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ ret = phy_device_connect(edev, &priv->miibus, slave_data[0].phy_id,
+ cpsw_adjust_link, 0, slave_data[0].phy_if);
+ if (ret)
+ return ret;
+
+ priv->data.control(1);
+
+ /* soft reset the controller and initialize priv */
+ soft_reset(&priv->regs->soft_reset);
+
+ /* initialize and reset the address lookup engine */
+ cpsw_ale_enable(priv, 1);
+ cpsw_ale_clear(priv, 1);
+ cpsw_ale_bypass(priv, 0);
+ cpsw_ale_vlan_aware(priv, 0); /* vlan unaware mode */
+
+ /* setup host port priority mapping */
+ __raw_writel(0x76543210, &priv->host_port_regs->cpdma_tx_pri_map);
+ __raw_writel(0, &priv->host_port_regs->cpdma_rx_chan_map);
+
+ /* disable priority elevation and enable statistics on all ports */
+ __raw_writel(0, &priv->regs->ptype);
+
+ /* enable statistics collection only on the host port */
+ __raw_writel(BIT(priv->host_port), &priv->regs->stat_port_en);
+
+ cpsw_ale_port_state(priv, priv->host_port, ALE_PORT_STATE_FORWARD);
+
+ cpsw_ale_add_ucast(priv, priv->mac_addr, priv->host_port,
+ ALE_SECURE);
+ cpsw_ale_add_mcast(priv, ethbdaddr, 1 << priv->host_port);
+
+ for_each_slave(priv, cpsw_slave_init, priv);
+
+ cpsw_update_link(priv);
+
+ /* init descriptor pool */
+ for (i = 0; i < NUM_DESCS; i++) {
+ desc_write(&priv->descs[i], hw_next,
+ (i == (NUM_DESCS - 1)) ? 0 : &priv->descs[i+1]);
+ }
+ priv->desc_free = &priv->descs[0];
+
+ /* initialize channels */
+ if (priv->data.version == CPSW_CTRL_VERSION_2) {
+ memset(&priv->rx_chan, 0, sizeof(struct cpdma_chan));
+ priv->rx_chan.hdp = priv->dma_regs + CPDMA_RXHDP_VER2;
+ priv->rx_chan.cp = priv->dma_regs + CPDMA_RXCP_VER2;
+ priv->rx_chan.rxfree = priv->dma_regs + CPDMA_RXFREE;
+
+ memset(&priv->tx_chan, 0, sizeof(struct cpdma_chan));
+ priv->tx_chan.hdp = priv->dma_regs + CPDMA_TXHDP_VER2;
+ priv->tx_chan.cp = priv->dma_regs + CPDMA_TXCP_VER2;
+ } else {
+ memset(&priv->rx_chan, 0, sizeof(struct cpdma_chan));
+ priv->rx_chan.hdp = priv->dma_regs + CPDMA_RXHDP_VER1;
+ priv->rx_chan.cp = priv->dma_regs + CPDMA_RXCP_VER1;
+ priv->rx_chan.rxfree = priv->dma_regs + CPDMA_RXFREE;
+
+ memset(&priv->tx_chan, 0, sizeof(struct cpdma_chan));
+ priv->tx_chan.hdp = priv->dma_regs + CPDMA_TXHDP_VER1;
+ priv->tx_chan.cp = priv->dma_regs + CPDMA_TXCP_VER1;
+ }
+
+ /* clear dma state */
+ soft_reset(priv->dma_regs + CPDMA_SOFTRESET);
+
+ if (priv->data.version == CPSW_CTRL_VERSION_2) {
+ for (i = 0; i < priv->data.channels; i++) {
+ __raw_writel(0, priv->dma_regs + CPDMA_RXHDP_VER2 + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_RXFREE + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_RXCP_VER2 + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_TXHDP_VER2 + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_TXCP_VER2 + 4
+ * i);
+ }
+ } else {
+ for (i = 0; i < priv->data.channels; i++) {
+ __raw_writel(0, priv->dma_regs + CPDMA_RXHDP_VER1 + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_RXFREE + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_RXCP_VER1 + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_TXHDP_VER1 + 4
+ * i);
+ __raw_writel(0, priv->dma_regs + CPDMA_TXCP_VER1 + 4
+ * i);
+
+ }
+ }
+
+ __raw_writel(1, priv->dma_regs + CPDMA_TXCONTROL);
+ __raw_writel(1, priv->dma_regs + CPDMA_RXCONTROL);
+
+ /* submit rx descs */
+ for (i = 0; i < PKTBUFSRX; i++) {
+ ret = cpdma_submit(priv, &priv->rx_chan, NetRxPackets[i],
+ PKTSIZE);
+ if (ret < 0) {
+ printf("error %d submitting rx desc\n", ret);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static void cpsw_halt(struct eth_device *dev)
+{
+ struct cpsw_priv *priv = dev->priv;
+ priv->data.control(0);
+}
+
+static int cpsw_send(struct eth_device *dev, void *packet, int length)
+{
+ // FIXME *packet was volatile before,
+ struct cpsw_priv *priv = dev->priv;
+ void *buffer;
+ int len;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ if (!cpsw_update_link(priv))
+ return -EIO;
+
+ /* first reap completed packets */
+ while (cpdma_process(priv, &priv->tx_chan, &buffer, &len) >= 0)
+ ;
+
+ dev_dbg(priv->dev, "%s: %i bytes @ 0x%p\n", __func__, length, packet);
+ dma_flush_range((ulong) packet, (ulong)packet + length);
+ return cpdma_submit(priv, &priv->tx_chan, packet, length);
+}
+
+static int cpsw_recv(struct eth_device *dev)
+{
+ struct cpsw_priv *priv = dev->priv;
+ void *buffer;
+ int len;
+
+ //dev_dbg(priv->dev, "* %s\n", __func__);
+
+ while (cpdma_process(priv, &priv->rx_chan, &buffer, &len) >= 0) {
+ dev_dbg(priv->dev, "%s: %i bytes @ 0x%p\n", __func__, len, buffer);
+ dma_inv_range((ulong)buffer, (ulong)buffer + len);
+ net_receive(buffer, len);
+ cpdma_submit(priv, &priv->rx_chan, buffer, PKTSIZE);
+ }
+
+ return 0;
+}
+
+static void cpsw_slave_setup(struct cpsw_slave *slave, int slave_num,
+ struct cpsw_priv *priv)
+{
+ void *regs = priv->regs;
+ struct cpsw_slave_data *data = priv->data.slave_data + slave_num;
+
+ dev_dbg(priv->dev, "* %s\n", __func__);
+
+ slave->slave_num = slave_num;
+ slave->data = data;
+ slave->regs = regs + data->slave_reg_ofs;
+ slave->sliver = regs + data->sliver_reg_ofs;
+}
+
+int cpsw_probe(struct device_d *dev)
+{
+ struct cpsw_platform_data *data = (struct cpsw_platform_data *)dev->platform_data;
+ struct cpsw_priv *priv;
+ void *regs = (void *)data->cpsw_base;
+ struct eth_device *edev;
+ uint64_t start;
+ uint32_t phy_mask;
+
+ dev_dbg(dev, "* %s\n", __func__);
+
+ priv = xzalloc(sizeof(*priv));
+ priv->dev = dev;
+ priv->data = *data;
+ edev = &priv->edev;
+
+ priv->slaves = xzalloc(sizeof(struct cpsw_slave) * data->slaves);
+
+ priv->descs = (void *)CPDMA_RAM_ADDR;
+ priv->host_port = data->host_port_num;
+ priv->regs = regs;
+ priv->host_port_regs = regs + data->host_port_reg_ofs;
+ priv->dma_regs = regs + data->cpdma_reg_ofs;
+ priv->ale_regs = regs + data->ale_reg_ofs;
+
+ for_each_slave(priv, cpsw_slave_setup, idx, priv);
+
+ edev->priv = priv;
+ edev->init = cpsw_init;
+ edev->open = cpsw_open;
+ edev->halt = cpsw_halt;
+ edev->send = cpsw_send;
+ edev->recv = cpsw_recv;
+ edev->get_ethaddr = cpsw_get_hwaddr;
+ edev->set_ethaddr = cpsw_set_hwaddr;
+ edev->parent = dev;
+
+ mdio_regs = (struct cpsw_mdio_regs *)data->mdio_base;
+ priv->miibus.read = cpsw_mdio_read;
+ priv->miibus.write = cpsw_mdio_write;
+ priv->miibus.priv = priv;
+ priv->miibus.parent = dev;
+
+ /* set enable and clock divider */
+ __raw_writel(data->mdio_div | CONTROL_ENABLE, &mdio_regs->control);
+
+ /*
+ * wait for scan logic to settle:
+ * the scan time consists of (a) a large fixed component, and (b) a
+ * small component that varies with the mii bus frequency. These
+ * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x
+ * silicon. Since the effect of (b) was found to be largely
+ * negligible, we keep things simple here.
+ */
+ udelay(1000);
+
+ start = get_time_ns();
+ while (1) {
+ phy_mask = readl(&mdio_regs->alive);
+ if (phy_mask) {
+ dev_info(dev, "detected phy mask 0x%x\n", phy_mask);
+ phy_mask = ~phy_mask;
+ break;
+ }
+ if (is_timeout(start, 256 * MSECOND)) {
+ dev_err(dev, "no live phy, scanning all\n");
+ phy_mask = 0;
+ break;
+ }
+ }
+
+ priv->miibus.phy_mask = phy_mask;
+
+ mdiobus_register(&priv->miibus);
+
+ eth_register(edev);
+
+ return 0;
+}
+
+static struct driver_d cpsw_driver = {
+ .name = "cpsw",
+ .probe = cpsw_probe,
+// .remove = cpsw_remove,
+};
+
+static int cpsw_register(void)
+{
+ platform_driver_register(&cpsw_driver);
+ return 0;
+}
+
+device_initcall(cpsw_register);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board
2012-12-18 14:22 ` [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board Jan Luebbe
@ 2012-12-19 12:07 ` Teresa Gámez
0 siblings, 0 replies; 22+ messages in thread
From: Teresa Gámez @ 2012-12-19 12:07 UTC (permalink / raw)
To: Jan Luebbe; +Cc: barebox
Hello Jan,
On Tue, 18. Dec 15:22, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
[...]
> diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
> new file mode 100644
> index 0000000..d139e94
> --- /dev/null
> +++ b/arch/arm/boards/beaglebone/board.c
> @@ -0,0 +1,358 @@
> +/*
> + * (C) Copyright 2008
> + * Texas Instruments, <www.ti.com>
> + * Raghavendra KH <r-khandenahally@ti.com>
> + *
> + * Copyright (C) 2012 Jan Luebbe <j.luebbe@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/**
> + * @file
> + * @brief BeagleBone Specific Board Initialization routines
> + */
> +
> +#include <common.h>
> +#include <console.h>
> +#include <init.h>
> +#include <driver.h>
> +#include <fs.h>
> +#include <linux/stat.h>
> +#include <environment.h>
> +#include <sizes.h>
> +#include <io.h>
> +#include <ns16550.h>
> +#include <asm/armlinux.h>
> +#include <generated/mach-types.h>
> +#include <mach/am33xx-silicon.h>
> +#include <mach/am33xx-clock.h>
> +#include <mach/sdrc.h>
> +#include <mach/sys_info.h>
> +#include <mach/syslib.h>
> +#include <mach/gpmc.h>
> +#include <mach/ehci.h>
> +#include <i2c/i2c.h>
> +#include <linux/err.h>
> +#include <usb/ehci.h>
> +#include <mach/xload.h>
> +#include <mach/am33xx-devices.h>
> +#include <mach/am33xx-mux.h>
> +#include <mach/cpsw.h>
This won't compile as mach/cpsw.h is not known yet.
Move this line to next patch.
Regards,
Teresa
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 19/19] drivers: net: add driver for TI CPSW
2012-12-18 14:22 ` [PATCH 19/19] drivers: net: add driver for TI CPSW Jan Luebbe
@ 2012-12-19 21:11 ` Sascha Hauer
0 siblings, 0 replies; 22+ messages in thread
From: Sascha Hauer @ 2012-12-19 21:11 UTC (permalink / raw)
To: Jan Luebbe; +Cc: barebox
On Tue, Dec 18, 2012 at 03:22:41PM +0100, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/arm/boards/beaglebone/board.c | 80 +++
> arch/arm/mach-omap/include/mach/cpsw.h | 49 ++
> drivers/net/Kconfig | 4 +
> drivers/net/Makefile | 1 +
> drivers/net/cpsw.c | 1021 ++++++++++++++++++++++++++++++++
> 5 files changed, 1155 insertions(+)
> create mode 100644 arch/arm/mach-omap/include/mach/cpsw.h
> create mode 100644 drivers/net/cpsw.c
>
> diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
> index d139e94..20b4bdd 100644
> --- a/arch/arm/boards/beaglebone/board.c
> +++ b/arch/arm/boards/beaglebone/board.c
> @@ -31,6 +31,7 @@
> #include <sizes.h>
> #include <io.h>
> #include <ns16550.h>
> +#include <net.h>
> #include <asm/armlinux.h>
> #include <generated/mach-types.h>
> #include <mach/am33xx-silicon.h>
> @@ -42,6 +43,7 @@
> #include <mach/ehci.h>
> #include <i2c/i2c.h>
> #include <linux/err.h>
> +#include <linux/phy.h>
> #include <usb/ehci.h>
> #include <mach/xload.h>
> #include <mach/am33xx-devices.h>
> @@ -306,6 +308,84 @@ static int beaglebone_console_init(void)
> console_initcall(beaglebone_console_init);
> #endif /* CONFIG_DRIVER_SERIAL_NS16550 */
>
> +#ifdef CONFIG_DRIVER_NET_CPSW
> +static void cpsw_control(int enabled)
> +{
> + return;
> +}
> +
> +static struct cpsw_slave_data cpsw_slaves[] = {
> + {
> + .slave_reg_ofs = 0x208,
> + .sliver_reg_ofs = 0xd80,
> + .phy_id = 0,
> + .phy_if = PHY_INTERFACE_MODE_MII,
> + },
> + {
> + .slave_reg_ofs = 0x308,
> + .sliver_reg_ofs = 0xdc0,
> + .phy_id = 1,
> + .phy_if = PHY_INTERFACE_MODE_MII,
> + },
> +};
> +
> +static struct cpsw_platform_data cpsw_data = {
> + .mdio_base = AM335X_CPSW_MDIO_BASE,
> + .cpsw_base = AM335X_CPSW_BASE,
> + .mdio_div = 0xff,
> + .channels = 8,
> + .cpdma_reg_ofs = 0x800,
> + .slaves = 2,
> + .slave_data = cpsw_slaves,
> + .ale_reg_ofs = 0xd00,
> + .ale_entries = 1024,
> + .host_port_reg_ofs = 0x108,
> + .hw_stats_reg_ofs = 0x900,
> + .mac_control = (1 << 5) /* MIIEN */,
> + .control = cpsw_control,
> + .host_port_num = 0,
> + .version = CPSW_CTRL_VERSION_2,
> +};
Most of this looks SoC specific, not board specific. You should use the
platform_device_id mechanism for this.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2012-12-19 21:12 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
2012-12-18 14:22 ` [PATCH 01/19] ARM omap: remove unused function Jan Luebbe
2012-12-18 14:22 ` [PATCH 02/19] ARM omap4: remove unused struct Jan Luebbe
2012-12-18 14:22 ` [PATCH 03/19] ARM omap4: Add missing assembly protection in header file Jan Luebbe
2012-12-18 14:22 ` [PATCH 04/19] ARM omap4: Add missing double include protection Jan Luebbe
2012-12-18 14:22 ` [PATCH 05/19] ARM omap: Make gpmc base runtime configurable Jan Luebbe
2012-12-18 14:22 ` [PATCH 06/19] ARM omap: Make timer " Jan Luebbe
2012-12-18 14:22 ` [PATCH 07/19] ARM omap4: make PRM defines SoC specific Jan Luebbe
2012-12-18 14:22 ` [PATCH 08/19] ARM omap3: " Jan Luebbe
2012-12-18 14:22 ` [PATCH 09/19] ARM omap: Use SoC specific defines for gpmc and timer base Jan Luebbe
2012-12-18 14:22 ` [PATCH 10/19] ARM omap: include individual SoC files Jan Luebbe
2012-12-18 14:22 ` [PATCH 11/19] ARM omap: Add device register convenience functions Jan Luebbe
2012-12-18 14:22 ` [PATCH 12/19] ARM omap3: Use device register functions in boards Jan Luebbe
2012-12-18 14:22 ` [PATCH 13/19] ARM omap4: " Jan Luebbe
2012-12-18 14:22 ` [PATCH 14/19] ARM omap hsmmc: Fix register offset Jan Luebbe
2012-12-18 14:22 ` [PATCH 15/19] ARM omap3: Add change OMAP_ prefix to OMAP3_ for registers Jan Luebbe
2012-12-18 14:22 ` [PATCH 16/19] ARM OMAP AM33XX: create new ARCH for AM33xx Jan Luebbe
2012-12-18 14:22 ` [PATCH 17/19] arm: omap: am33xx: add support for low level debug Jan Luebbe
2012-12-18 14:22 ` [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board Jan Luebbe
2012-12-19 12:07 ` Teresa Gámez
2012-12-18 14:22 ` [PATCH 19/19] drivers: net: add driver for TI CPSW Jan Luebbe
2012-12-19 21:11 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox