From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 3/6] at91: drop PIN_BASE offset for gpio
Date: Thu, 20 Dec 2012 15:31:47 +0100 [thread overview]
Message-ID: <1356013910-30196-3-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1356013910-30196-1-git-send-email-plagnioj@jcrosoft.com>
so 0 is a valid gpio as cleanned in the kernel
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/gpio.c | 2 -
arch/arm/mach-at91/include/mach/gpio.h | 530 ++++++++++++++++----------------
2 files changed, 263 insertions(+), 269 deletions(-)
rewrite arch/arm/mach-at91/include/mach/gpio.h (73%)
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index c35f00e..cd0136f 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -38,7 +38,6 @@ static struct at91_gpio_bank *gpio;
static inline void __iomem *pin_to_controller(unsigned pin)
{
- pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
return gpio[pin].regbase;
@@ -48,7 +47,6 @@ static inline void __iomem *pin_to_controller(unsigned pin)
static inline unsigned pin_to_mask(unsigned pin)
{
- pin -= PIN_BASE;
return 1 << (pin % 32);
}
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
dissimilarity index 73%
index fa695a6..200a852 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -1,267 +1,263 @@
-/*
- * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h]
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91_GPIO_H
-#define __ASM_ARCH_AT91_GPIO_H
-
-#include <io.h>
-#include <asm-generic/errno.h>
-#include <mach/at91_pio.h>
-#include <mach/hardware.h>
-
-#define PIN_BASE 32
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define ARCH_NR_GPIOS 256
-
-static inline int gpio_is_valid(int gpio)
-{
- if (gpio < 1)
- return 0;
- if (gpio < ARCH_NR_GPIOS)
- return 1;
- return 0;
-}
-
-#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
-#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
-#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
-#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
-#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
-#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
-#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
-#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
-#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
-#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
-#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
-#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
-#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
-#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
-#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
-#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
-#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
-#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
-#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
-#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
-#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
-#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
-#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
-#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
-#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
-#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
-#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
-#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
-#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
-#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
-#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
-#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
-
-#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
-#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
-#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
-#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
-#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
-#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
-#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
-#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
-#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
-#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
-#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
-#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
-#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
-#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
-#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
-#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
-#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
-#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
-#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
-#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
-#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
-#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
-#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
-#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
-#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
-#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
-#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
-#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
-#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
-#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
-#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
-#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
-
-#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
-#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
-#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
-#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
-#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
-#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
-#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
-#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
-#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
-#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
-#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
-#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
-#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
-#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
-#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
-#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
-#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
-#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
-#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
-#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
-#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
-#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
-#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
-#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
-#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
-#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
-#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
-#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
-#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
-#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
-#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
-#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
-
-#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
-#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
-#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
-#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
-#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
-#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
-#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
-#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
-#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
-#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
-#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
-#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
-#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
-#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
-#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
-#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
-#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
-#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
-#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
-#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
-#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
-#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
-#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
-#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
-#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
-#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
-#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
-#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
-#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
-#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
-#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
-#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
-
-#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
-#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
-#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
-#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
-#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
-#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
-#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
-#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
-#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
-#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
-#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
-#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
-#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
-#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
-#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
-#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
-#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
-#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
-#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
-#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
-#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
-#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
-#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
-#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
-#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
-#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
-#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
-#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
-#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
-#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
-#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
-#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
-
-/*
- * mux the pin to the "GPIO" peripheral role.
- */
-int at91_set_GPIO_periph(unsigned pin, int use_pullup);
-
-
-/*
- * mux the pin to the "A" internal peripheral role.
- */
-int at91_set_A_periph(unsigned pin, int use_pullup);
-
-/*
- * mux the pin to the "B" internal peripheral role.
- */
-int at91_set_B_periph(unsigned pin, int use_pullup);
-/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
- * configure it for an input.
- */
-int at91_set_gpio_input(unsigned pin, int use_pullup);
-
-/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
- * and configure it for an output.
- */
-int at91_set_gpio_output(unsigned pin, int value);
-
-/*
- * enable/disable the glitch filter; mostly used with IRQ handling.
- */
-int at91_set_deglitch(unsigned pin, int is_on);
-
-/*
- * enable/disable the multi-driver; This is only valid for output and
- * allows the output pin to run as an open collector output.
- */
-int at91_set_multi_drive(unsigned pin, int is_on);
-
-/*
- * assuming the pin is muxed as a gpio output, set its value.
- */
-int at91_set_gpio_value(unsigned pin, int value);
-
-extern int at91_set_C_periph(unsigned pin, int use_pullup);
-extern int at91_set_D_periph(unsigned pin, int use_pullup);
-extern int at91_set_debounce(unsigned pin, int is_on, int div);
-extern int at91_set_pulldown(unsigned pin, int is_on);
-extern int at91_disable_schmitt_trig(unsigned pin);
-
-/*
- * read the pin's value (works even if it's not muxed as a gpio).
- */
-int at91_get_gpio_value(unsigned pin);
-
-struct at91_gpio_bank {
- void __iomem *regbase; /* base of register bank */
- struct clk *clock;
-};
-
-extern int at91_gpio_init(struct at91_gpio_bank *data, int nr_banks);
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-#define gpio_get_value at91_get_gpio_value
-#define gpio_set_value at91_set_gpio_value
-
-#endif /* __ASM_ARCH_AT91SAM9_GPIO_H */
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h]
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91_GPIO_H
+#define __ASM_ARCH_AT91_GPIO_H
+
+#include <io.h>
+#include <asm-generic/errno.h>
+#include <mach/at91_pio.h>
+#include <mach/hardware.h>
+
+#define ARCH_NR_GPIOS 256
+
+static inline int gpio_is_valid(int gpio)
+{
+ if (gpio < 0)
+ return 0;
+ if (gpio < ARCH_NR_GPIOS)
+ return 1;
+ return 0;
+}
+
+#define AT91_PIN_PA0 (0x00 + 0)
+#define AT91_PIN_PA1 (0x00 + 1)
+#define AT91_PIN_PA2 (0x00 + 2)
+#define AT91_PIN_PA3 (0x00 + 3)
+#define AT91_PIN_PA4 (0x00 + 4)
+#define AT91_PIN_PA5 (0x00 + 5)
+#define AT91_PIN_PA6 (0x00 + 6)
+#define AT91_PIN_PA7 (0x00 + 7)
+#define AT91_PIN_PA8 (0x00 + 8)
+#define AT91_PIN_PA9 (0x00 + 9)
+#define AT91_PIN_PA10 (0x00 + 10)
+#define AT91_PIN_PA11 (0x00 + 11)
+#define AT91_PIN_PA12 (0x00 + 12)
+#define AT91_PIN_PA13 (0x00 + 13)
+#define AT91_PIN_PA14 (0x00 + 14)
+#define AT91_PIN_PA15 (0x00 + 15)
+#define AT91_PIN_PA16 (0x00 + 16)
+#define AT91_PIN_PA17 (0x00 + 17)
+#define AT91_PIN_PA18 (0x00 + 18)
+#define AT91_PIN_PA19 (0x00 + 19)
+#define AT91_PIN_PA20 (0x00 + 20)
+#define AT91_PIN_PA21 (0x00 + 21)
+#define AT91_PIN_PA22 (0x00 + 22)
+#define AT91_PIN_PA23 (0x00 + 23)
+#define AT91_PIN_PA24 (0x00 + 24)
+#define AT91_PIN_PA25 (0x00 + 25)
+#define AT91_PIN_PA26 (0x00 + 26)
+#define AT91_PIN_PA27 (0x00 + 27)
+#define AT91_PIN_PA28 (0x00 + 28)
+#define AT91_PIN_PA29 (0x00 + 29)
+#define AT91_PIN_PA30 (0x00 + 30)
+#define AT91_PIN_PA31 (0x00 + 31)
+
+#define AT91_PIN_PB0 (0x20 + 0)
+#define AT91_PIN_PB1 (0x20 + 1)
+#define AT91_PIN_PB2 (0x20 + 2)
+#define AT91_PIN_PB3 (0x20 + 3)
+#define AT91_PIN_PB4 (0x20 + 4)
+#define AT91_PIN_PB5 (0x20 + 5)
+#define AT91_PIN_PB6 (0x20 + 6)
+#define AT91_PIN_PB7 (0x20 + 7)
+#define AT91_PIN_PB8 (0x20 + 8)
+#define AT91_PIN_PB9 (0x20 + 9)
+#define AT91_PIN_PB10 (0x20 + 10)
+#define AT91_PIN_PB11 (0x20 + 11)
+#define AT91_PIN_PB12 (0x20 + 12)
+#define AT91_PIN_PB13 (0x20 + 13)
+#define AT91_PIN_PB14 (0x20 + 14)
+#define AT91_PIN_PB15 (0x20 + 15)
+#define AT91_PIN_PB16 (0x20 + 16)
+#define AT91_PIN_PB17 (0x20 + 17)
+#define AT91_PIN_PB18 (0x20 + 18)
+#define AT91_PIN_PB19 (0x20 + 19)
+#define AT91_PIN_PB20 (0x20 + 20)
+#define AT91_PIN_PB21 (0x20 + 21)
+#define AT91_PIN_PB22 (0x20 + 22)
+#define AT91_PIN_PB23 (0x20 + 23)
+#define AT91_PIN_PB24 (0x20 + 24)
+#define AT91_PIN_PB25 (0x20 + 25)
+#define AT91_PIN_PB26 (0x20 + 26)
+#define AT91_PIN_PB27 (0x20 + 27)
+#define AT91_PIN_PB28 (0x20 + 28)
+#define AT91_PIN_PB29 (0x20 + 29)
+#define AT91_PIN_PB30 (0x20 + 30)
+#define AT91_PIN_PB31 (0x20 + 31)
+
+#define AT91_PIN_PC0 (0x40 + 0)
+#define AT91_PIN_PC1 (0x40 + 1)
+#define AT91_PIN_PC2 (0x40 + 2)
+#define AT91_PIN_PC3 (0x40 + 3)
+#define AT91_PIN_PC4 (0x40 + 4)
+#define AT91_PIN_PC5 (0x40 + 5)
+#define AT91_PIN_PC6 (0x40 + 6)
+#define AT91_PIN_PC7 (0x40 + 7)
+#define AT91_PIN_PC8 (0x40 + 8)
+#define AT91_PIN_PC9 (0x40 + 9)
+#define AT91_PIN_PC10 (0x40 + 10)
+#define AT91_PIN_PC11 (0x40 + 11)
+#define AT91_PIN_PC12 (0x40 + 12)
+#define AT91_PIN_PC13 (0x40 + 13)
+#define AT91_PIN_PC14 (0x40 + 14)
+#define AT91_PIN_PC15 (0x40 + 15)
+#define AT91_PIN_PC16 (0x40 + 16)
+#define AT91_PIN_PC17 (0x40 + 17)
+#define AT91_PIN_PC18 (0x40 + 18)
+#define AT91_PIN_PC19 (0x40 + 19)
+#define AT91_PIN_PC20 (0x40 + 20)
+#define AT91_PIN_PC21 (0x40 + 21)
+#define AT91_PIN_PC22 (0x40 + 22)
+#define AT91_PIN_PC23 (0x40 + 23)
+#define AT91_PIN_PC24 (0x40 + 24)
+#define AT91_PIN_PC25 (0x40 + 25)
+#define AT91_PIN_PC26 (0x40 + 26)
+#define AT91_PIN_PC27 (0x40 + 27)
+#define AT91_PIN_PC28 (0x40 + 28)
+#define AT91_PIN_PC29 (0x40 + 29)
+#define AT91_PIN_PC30 (0x40 + 30)
+#define AT91_PIN_PC31 (0x40 + 31)
+
+#define AT91_PIN_PD0 (0x60 + 0)
+#define AT91_PIN_PD1 (0x60 + 1)
+#define AT91_PIN_PD2 (0x60 + 2)
+#define AT91_PIN_PD3 (0x60 + 3)
+#define AT91_PIN_PD4 (0x60 + 4)
+#define AT91_PIN_PD5 (0x60 + 5)
+#define AT91_PIN_PD6 (0x60 + 6)
+#define AT91_PIN_PD7 (0x60 + 7)
+#define AT91_PIN_PD8 (0x60 + 8)
+#define AT91_PIN_PD9 (0x60 + 9)
+#define AT91_PIN_PD10 (0x60 + 10)
+#define AT91_PIN_PD11 (0x60 + 11)
+#define AT91_PIN_PD12 (0x60 + 12)
+#define AT91_PIN_PD13 (0x60 + 13)
+#define AT91_PIN_PD14 (0x60 + 14)
+#define AT91_PIN_PD15 (0x60 + 15)
+#define AT91_PIN_PD16 (0x60 + 16)
+#define AT91_PIN_PD17 (0x60 + 17)
+#define AT91_PIN_PD18 (0x60 + 18)
+#define AT91_PIN_PD19 (0x60 + 19)
+#define AT91_PIN_PD20 (0x60 + 20)
+#define AT91_PIN_PD21 (0x60 + 21)
+#define AT91_PIN_PD22 (0x60 + 22)
+#define AT91_PIN_PD23 (0x60 + 23)
+#define AT91_PIN_PD24 (0x60 + 24)
+#define AT91_PIN_PD25 (0x60 + 25)
+#define AT91_PIN_PD26 (0x60 + 26)
+#define AT91_PIN_PD27 (0x60 + 27)
+#define AT91_PIN_PD28 (0x60 + 28)
+#define AT91_PIN_PD29 (0x60 + 29)
+#define AT91_PIN_PD30 (0x60 + 30)
+#define AT91_PIN_PD31 (0x60 + 31)
+
+#define AT91_PIN_PE0 (0x80 + 0)
+#define AT91_PIN_PE1 (0x80 + 1)
+#define AT91_PIN_PE2 (0x80 + 2)
+#define AT91_PIN_PE3 (0x80 + 3)
+#define AT91_PIN_PE4 (0x80 + 4)
+#define AT91_PIN_PE5 (0x80 + 5)
+#define AT91_PIN_PE6 (0x80 + 6)
+#define AT91_PIN_PE7 (0x80 + 7)
+#define AT91_PIN_PE8 (0x80 + 8)
+#define AT91_PIN_PE9 (0x80 + 9)
+#define AT91_PIN_PE10 (0x80 + 10)
+#define AT91_PIN_PE11 (0x80 + 11)
+#define AT91_PIN_PE12 (0x80 + 12)
+#define AT91_PIN_PE13 (0x80 + 13)
+#define AT91_PIN_PE14 (0x80 + 14)
+#define AT91_PIN_PE15 (0x80 + 15)
+#define AT91_PIN_PE16 (0x80 + 16)
+#define AT91_PIN_PE17 (0x80 + 17)
+#define AT91_PIN_PE18 (0x80 + 18)
+#define AT91_PIN_PE19 (0x80 + 19)
+#define AT91_PIN_PE20 (0x80 + 20)
+#define AT91_PIN_PE21 (0x80 + 21)
+#define AT91_PIN_PE22 (0x80 + 22)
+#define AT91_PIN_PE23 (0x80 + 23)
+#define AT91_PIN_PE24 (0x80 + 24)
+#define AT91_PIN_PE25 (0x80 + 25)
+#define AT91_PIN_PE26 (0x80 + 26)
+#define AT91_PIN_PE27 (0x80 + 27)
+#define AT91_PIN_PE28 (0x80 + 28)
+#define AT91_PIN_PE29 (0x80 + 29)
+#define AT91_PIN_PE30 (0x80 + 30)
+#define AT91_PIN_PE31 (0x80 + 31)
+
+/*
+ * mux the pin to the "GPIO" peripheral role.
+ */
+int at91_set_GPIO_periph(unsigned pin, int use_pullup);
+
+
+/*
+ * mux the pin to the "A" internal peripheral role.
+ */
+int at91_set_A_periph(unsigned pin, int use_pullup);
+
+/*
+ * mux the pin to the "B" internal peripheral role.
+ */
+int at91_set_B_periph(unsigned pin, int use_pullup);
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
+ * configure it for an input.
+ */
+int at91_set_gpio_input(unsigned pin, int use_pullup);
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
+ * and configure it for an output.
+ */
+int at91_set_gpio_output(unsigned pin, int value);
+
+/*
+ * enable/disable the glitch filter; mostly used with IRQ handling.
+ */
+int at91_set_deglitch(unsigned pin, int is_on);
+
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+int at91_set_multi_drive(unsigned pin, int is_on);
+
+/*
+ * assuming the pin is muxed as a gpio output, set its value.
+ */
+int at91_set_gpio_value(unsigned pin, int value);
+
+extern int at91_set_C_periph(unsigned pin, int use_pullup);
+extern int at91_set_D_periph(unsigned pin, int use_pullup);
+extern int at91_set_debounce(unsigned pin, int is_on, int div);
+extern int at91_set_pulldown(unsigned pin, int is_on);
+extern int at91_disable_schmitt_trig(unsigned pin);
+
+/*
+ * read the pin's value (works even if it's not muxed as a gpio).
+ */
+int at91_get_gpio_value(unsigned pin);
+
+struct at91_gpio_bank {
+ void __iomem *regbase; /* base of register bank */
+ struct clk *clock;
+};
+
+extern int at91_gpio_init(struct at91_gpio_bank *data, int nr_banks);
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+#define gpio_get_value at91_get_gpio_value
+#define gpio_set_value at91_set_gpio_value
+
+#endif /* __ASM_ARCH_AT91SAM9_GPIO_H */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-12-20 14:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-20 14:29 [PATCH 0/6] at91: mux cleanup and switch to gpiolib Jean-Christophe PLAGNIOL-VILLARD
2012-12-20 14:31 ` [PATCH 1/6] at91: use gpio_is_valid to check gpio Jean-Christophe PLAGNIOL-VILLARD
2012-12-20 14:31 ` [PATCH 2/6] at91: use -EINVAL for invalid gpio Jean-Christophe PLAGNIOL-VILLARD
2012-12-20 14:31 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-12-20 14:31 ` [PATCH 4/6] at91: gpio: switch to device driver Jean-Christophe PLAGNIOL-VILLARD
2012-12-20 14:31 ` [PATCH 5/6] at91: gpio: switch to ops Jean-Christophe PLAGNIOL-VILLARD
2012-12-20 14:31 ` [PATCH 6/6] at91: switch to gpiolib Jean-Christophe PLAGNIOL-VILLARD
2012-12-22 18:39 ` [PATCH 0/6] at91: mux cleanup and " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1356013910-30196-3-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox