From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 9/9] at91sam9x5ek: add usb support
Date: Mon, 21 Jan 2013 21:09:56 +0100 [thread overview]
Message-ID: <1358798996-26595-9-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1358798996-26595-1-git-send-email-plagnioj@jcrosoft.com>
warning: the ohci work only without MMU
enable:
- ehci
- usb strorage
- usb net asix
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/at91sam9x5ek/init.c | 20 +++++++++++++++-----
arch/arm/configs/at91sam9x5ek_defconfig | 6 ++++++
2 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index f230205..5e11241 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -192,14 +192,24 @@ static void ek_add_device_spi(void)
at91_add_device_spi(0, &spi_pdata);
}
+#if defined(CONFIG_USB_OHCI) || defined(CONFIG_USB_EHCI)
/*
- * USB Host port
+ * USB HS Host port (common to OHCI & EHCI)
*/
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {AT91_PIN_PD20, AT91_PIN_PD19},
+static struct at91_usbh_data ek_usbh_hs_data = {
+ .ports = 2,
+ .vbus_pin = {AT91_PIN_PD19, AT91_PIN_PD20},
};
+static void ek_add_device_usb(void)
+{
+ at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ at91_add_device_usbh_ehci(&ek_usbh_hs_data);
+}
+#else
+static void ek_add_device_usb(void) {}
+#endif
+
struct gpio_led leds[] = {
{
.gpio = AT91_PIN_PB18,
@@ -250,7 +260,7 @@ static int at91sam9x5ek_devices_init(void)
ek_add_device_eth();
ek_add_device_spi();
ek_add_device_mci();
- at91_add_device_usbh_ohci(&ek_usbh_data);
+ ek_add_device_usb();
ek_add_led();
ek_add_device_i2c();
diff --git a/arch/arm/configs/at91sam9x5ek_defconfig b/arch/arm/configs/at91sam9x5ek_defconfig
index 0df8631..400a35b 100644
--- a/arch/arm/configs/at91sam9x5ek_defconfig
+++ b/arch/arm/configs/at91sam9x5ek_defconfig
@@ -52,6 +52,8 @@ CONFIG_NET_NFS=y
CONFIG_NET_PING=y
CONFIG_NET_NETCONSOLE=y
CONFIG_DRIVER_NET_MACB=y
+CONFIG_NET_USB=y
+CONFIG_NET_USB_ASIX=y
CONFIG_DRIVER_SPI_ATMEL=y
CONFIG_MTD_M25P80=y
CONFIG_I2C=y
@@ -66,6 +68,10 @@ CONFIG_NAND=y
CONFIG_NAND_ATMEL=y
CONFIG_NAND_ATMEL_PMECC=y
CONFIG_UBI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI=y
+CONFIG_USB_EHCI_ATMEL=y
+CONFIG_USB_STORAGE=y
CONFIG_MCI=y
CONFIG_MCI_STARTUP=y
CONFIG_MCI_ATMEL=y
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-01-21 20:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-21 20:07 [PATCH 0/9] atmel: add ehci support Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 1/9] usb: add parameters info on usb device Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 2/9] usb: fix for USB_ST_STALLED status reporting in ehci_submit_async() Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 3/9] ehci: if caps ressource is not provided discover it via cr_capbase Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 4/9] ehci: add atmel support Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 5/9] at91: usb: allow to specicfy inverted vbus Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 6/9] at91sam9g45: add ehci support Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 7/9] at91sam9m10g45ek: add usb support Jean-Christophe PLAGNIOL-VILLARD
2013-01-22 8:30 ` Sascha Hauer
2013-01-22 14:15 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-22 14:24 ` Sascha Hauer
2013-01-22 14:46 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` [PATCH 8/9] at91sam9x5: add ehci support Jean-Christophe PLAGNIOL-VILLARD
2013-01-21 20:09 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-23 19:28 ` [PATCH 0/9] atmel: " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358798996-26595-9-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox