From: Alexander Shiyan <shc_work@mail.ru>
To: barebox@lists.infradead.org
Subject: [PATCH 1/5] ARM: ccmx51: Remove SDRAM size settings
Date: Tue, 22 Jan 2013 15:08:31 +0400 [thread overview]
Message-ID: <1358852915-17983-1-git-send-email-shc_work@mail.ru> (raw)
This patch removes SDRAM memory size setting from board due
to auto detect last one by ESDCTL.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/ccxmx51/ccxmx51.c | 42 +++++++++++++++++-------------------
arch/arm/boards/ccxmx51/ccxmx51.h | 1 -
2 files changed, 20 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index b3173a4..acd2aef 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -50,26 +50,26 @@
#include "ccxmx51.h"
static struct ccxmx51_ident ccxmx51_ids[] = {
-/* 0x00 */ { "Unknown", 0, 0, 0, 0, 0 },
-/* 0x01 */ { "Not supported", 0, 0, 0, 0, 0 },
-/* 0x02 */ { "i.MX515@800MHz, Wireless, PHY, Ext. Eth, Accel", SZ_512M, 0, 1, 1, 1 },
-/* 0x03 */ { "i.MX515@800MHz, PHY, Ext. Eth, Accel", SZ_512M, 0, 1, 1, 0 },
-/* 0x04 */ { "i.MX515@600MHz, Wireless, PHY, Ext. Eth, Accel", SZ_512M, 1, 1, 1, 1 },
-/* 0x05 */ { "i.MX515@600MHz, PHY, Ext. Eth, Accel", SZ_512M, 1, 1, 1, 0 },
-/* 0x06 */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_512M, 0, 1, 0, 1 },
-/* 0x07 */ { "i.MX515@800MHz, PHY, Accel", SZ_512M, 0, 1, 0, 0 },
-/* 0x08 */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_256M, 0, 1, 0, 1 },
-/* 0x09 */ { "i.MX515@800MHz, PHY, Accel", SZ_256M, 0, 1, 0, 0 },
-/* 0x0a */ { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_256M, 1, 1, 0, 1 },
-/* 0x0b */ { "i.MX515@600MHz, PHY, Accel", SZ_256M, 1, 1, 0, 0 },
-/* 0x0c */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_128M, 0, 1, 0, 1 },
-/* 0x0d */ { "i.MX512@800MHz", SZ_128M, 0, 0, 0, 0 },
-/* 0x0e */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_512M, 0, 1, 0, 1 },
-/* 0x0f */ { "i.MX515@600MHz, PHY, Accel", SZ_128M, 1, 1, 0, 0 },
-/* 0x10 */ { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_128M, 1, 1, 0, 1 },
-/* 0x11 */ { "i.MX515@800MHz, PHY, Accel", SZ_128M, 0, 1, 0, 0 },
-/* 0x12 */ { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_512M, 1, 1, 0, 1 },
-/* 0x13 */ { "i.MX515@800MHz, PHY, Accel", SZ_512M, 0, 1, 0, 0 },
+/* 0x00 */ { "Unknown", 0, 0, 0, 0 },
+/* 0x01 */ { "Not supported", 0, 0, 0, 0 },
+/* 0x02 */ { "i.MX515@800MHz, Wireless, PHY, Ext. Eth, Accel", 0, 1, 1, 1 },
+/* 0x03 */ { "i.MX515@800MHz, PHY, Ext. Eth, Accel", 0, 1, 1, 0 },
+/* 0x04 */ { "i.MX515@600MHz, Wireless, PHY, Ext. Eth, Accel", 1, 1, 1, 1 },
+/* 0x05 */ { "i.MX515@600MHz, PHY, Ext. Eth, Accel", 1, 1, 1, 0 },
+/* 0x06 */ { "i.MX515@800MHz, Wireless, PHY, Accel", 0, 1, 0, 1 },
+/* 0x07 */ { "i.MX515@800MHz, PHY, Accel", 0, 1, 0, 0 },
+/* 0x08 */ { "i.MX515@800MHz, Wireless, PHY, Accel", 0, 1, 0, 1 },
+/* 0x09 */ { "i.MX515@800MHz, PHY, Accel", 0, 1, 0, 0 },
+/* 0x0a */ { "i.MX515@600MHz, Wireless, PHY, Accel", 1, 1, 0, 1 },
+/* 0x0b */ { "i.MX515@600MHz, PHY, Accel", 1, 1, 0, 0 },
+/* 0x0c */ { "i.MX515@800MHz, Wireless, PHY, Accel", 0, 1, 0, 1 },
+/* 0x0d */ { "i.MX512@800MHz", 0, 0, 0, 0 },
+/* 0x0e */ { "i.MX515@800MHz, Wireless, PHY, Accel", 0, 1, 0, 1 },
+/* 0x0f */ { "i.MX515@600MHz, PHY, Accel", 1, 1, 0, 0 },
+/* 0x10 */ { "i.MX515@600MHz, Wireless, PHY, Accel", 1, 1, 0, 1 },
+/* 0x11 */ { "i.MX515@800MHz, PHY, Accel", 0, 1, 0, 0 },
+/* 0x12 */ { "i.MX515@600MHz, Wireless, PHY, Accel", 1, 1, 0, 1 },
+/* 0x13 */ { "i.MX515@800MHz, PHY, Accel", 0, 1, 0, 0 },
};
struct ccxmx51_ident *ccxmx51_id;
@@ -408,8 +408,6 @@ static int ccxmx51_devices_init(void)
break;
}
printf("Module Serial : %c%d\n", manloc, ((hwid[2] & 0x3f) << 24) | (hwid[3] << 16) | (hwid[4] << 8) | hwid[5]);
- if ((ccxmx51_id->mem_sz - SZ_128M) > 0)
- arm_add_mem_device("ram1", MX51_CSD0_BASE_ADDR + SZ_128M, ccxmx51_id->mem_sz - SZ_128M);
}
imx51_add_uart1();
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.h b/arch/arm/boards/ccxmx51/ccxmx51.h
index 3feacac..ef40b7f 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.h
+++ b/arch/arm/boards/ccxmx51/ccxmx51.h
@@ -23,7 +23,6 @@ struct ccxmx51_hwid {
struct ccxmx51_ident {
const char *id_string;
- const int mem_sz;
const char industrial;
const char eth0;
const char eth1;
--
1.7.3.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-01-22 11:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 11:08 Alexander Shiyan [this message]
2013-01-22 11:08 ` [PATCH 2/5] ARM: ccmx51: Fix ethernet devices control by MC13892 GPOs Alexander Shiyan
2013-01-22 11:08 ` [PATCH 3/5] ARM: ccmx51: Set MAC address before FEC device registration Alexander Shiyan
2013-01-22 11:08 ` [PATCH 4/5] ARM: ccmx51js: Define reset pin for USB Host1 Alexander Shiyan
2013-01-22 11:08 ` [PATCH 5/5] ARM: ccmx51: Update defconfig Alexander Shiyan
2013-01-23 7:35 ` [PATCH 1/5] ARM: ccmx51: Remove SDRAM size settings Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358852915-17983-1-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox