[PATCH 00/10 v7] at91: add bootstrap support

[PATCH 00/10 v7] at91: add bootstrap support

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

	v7:

	 Makefile bug fix + typo

	v6:
	 allow to pass the fstype for mount (omap usbfs)

	v5:
	 rebase on Sacha SHELL_NONE patch

	v4:
	 make the code arm & mips supported for barebox head detection

	v3:

	send correct patch series and pull

	can we have it on master the v2 does not cange much since v1

	v2:
	 fix whitesapce
	 fix comment
	 fix command default

	This patch serie introduce a common bootstrap code
	aka xloder for TI and at91bootstrap for Atmel
	to barebox

	As I do not have with me right now a TI platform I did not switch
	it to the new generic bootstrap code.

	On at91 add it on the calao usb-a9263 test on nand and spi
	This patch serie depends on the previous Sacha patch for SHELL_NONE

The following changes since commit a0a9331ba745418f1e7871f5bd707e3cc7e89902:

  startup: call a barebox_main function pointer at the end of the startup (2013-01-17 11:56:24 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91_bootstrap

for you to fetch changes up to b290fa88fb2c97a1d5b08ded3554c0a464a4562f:

  at91: usb_a9263: add bootstrap version (2013-01-18 17:17:11 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (10):
      filetype: add is_barebox_mips_head support
      filetype: add is_barebox_head
      at91: dump mux command: make it depends on COMMAND_SUPPORT
      at91: add test commamd to emulate bootrom boot
      at91sam926x: lowlevel add external boot support
      at91: sam926x: switch lowlevel param to c code
      at91: usb-a9263 add lowlevel init
      introduce common bootstrap code
      at91: add bootstrap version
      at91: usb_a9263: add bootstrap version

 arch/arm/boards/at91sam9263ek/Makefile                |    4 +++
 arch/arm/boards/at91sam9263ek/config.h                |   87 --------------------------------------------------------------
 arch/arm/boards/at91sam9263ek/lowlevel_init.c         |  104 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/mmccpu/Makefile                       |    4 +++
 arch/arm/boards/mmccpu/config.h                       |  118 ------------------------------------------------------------------------------------
 arch/arm/boards/mmccpu/lowlevel_init.c                |  135 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/pm9261/Makefile                       |    4 +++
 arch/arm/boards/pm9261/config.h                       |   87 --------------------------------------------------------------
 arch/arm/boards/pm9261/lowlevel_init.c                |  102 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/pm9263/Makefile                       |    4 +++
 arch/arm/boards/pm9263/config.h                       |  103 --------------------------------------------------------------------------
 arch/arm/boards/pm9263/lowlevel_init.c                |  121 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/usb-a926x/Makefile                    |    9 +++++++
 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c       |   16 ++++++++++++
 arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c   |  111 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig |   27 ++++++++++++++++++++
 arch/arm/configs/usb_a9263_bootstrap_defconfig        |   26 +++++++++++++++++++
 arch/arm/mach-at91/Kconfig                            |   16 ++++++++++++
 arch/arm/mach-at91/Makefile                           |    2 ++
 arch/arm/mach-at91/at91sam926x_lowlevel_init.c        |   84 ++++++++++++++++++++++++++++++++++++++++++------------------
 arch/arm/mach-at91/boot_test_cmd.c                    |   95 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/bootstrap.c                        |   95 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h  |   33 ++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/bootstrap.h           |   28 ++++++++++++++++++++
 common/filetype.c                                     |    2 +-
 include/bootstrap.h                                   |   34 +++++++++++++++++++++++++
 include/filetype.h                                    |   21 +++++++++++++++
 lib/Kconfig                                           |    2 ++
 lib/Makefile                                          |    1 +
 lib/bootstrap/Kconfig                                 |   13 ++++++++++
 lib/bootstrap/Makefile                                |    3 +++
 lib/bootstrap/common.c                                |   24 ++++++++++++++++++
 lib/bootstrap/devfs.c                                 |  118 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/bootstrap/disk.c                                  |   37 +++++++++++++++++++++++++++
 34 files changed, 1249 insertions(+), 421 deletions(-)
 create mode 100644 arch/arm/boards/at91sam9263ek/lowlevel_init.c
 create mode 100644 arch/arm/boards/mmccpu/lowlevel_init.c
 create mode 100644 arch/arm/boards/pm9261/lowlevel_init.c
 create mode 100644 arch/arm/boards/pm9263/lowlevel_init.c
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c
 create mode 100644 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
 create mode 100644 arch/arm/configs/usb_a9263_bootstrap_defconfig
 create mode 100644 arch/arm/mach-at91/boot_test_cmd.c
 create mode 100644 arch/arm/mach-at91/bootstrap.c
 create mode 100644 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
 create mode 100644 arch/arm/mach-at91/include/mach/bootstrap.h
 create mode 100644 include/bootstrap.h
 create mode 100644 lib/bootstrap/Kconfig
 create mode 100644 lib/bootstrap/Makefile
 create mode 100644 lib/bootstrap/common.c
 create mode 100644 lib/bootstrap/devfs.c
 create mode 100644 lib/bootstrap/disk.c

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 01/10] filetype: add is_barebox_mips_head support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 common/filetype.c  |    2 +-
 include/filetype.h |   16 ++++++++++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/common/filetype.c b/common/filetype.c
index 748e364..bafdc31 100644
--- a/common/filetype.c
+++ b/common/filetype.c
@@ -145,7 +145,7 @@ enum filetype file_detect_type(void *_buf, size_t bufsize)
 		return filetype_aimage;
 	if (buf64[0] == le64_to_cpu(0x0a1a0a0d474e5089ull))
 		return filetype_png;
-	if (strncmp(buf8 + 0x10, "barebox", 7) == 0)
+	if (is_barebox_mips_head(_buf))
 		return filetype_mips_barebox;
 
 	if (bufsize < 64)
diff --git a/include/filetype.h b/include/filetype.h
index 91139db..c2af917 100644
--- a/include/filetype.h
+++ b/include/filetype.h
@@ -50,4 +50,20 @@ static inline int is_barebox_arm_head(const char *head)
 }
 #endif
 
+#define MIPS_HEAD_SIZE			0x20
+#define MIPS_HEAD_MAGICWORD_OFFSET	0x10
+#define MIPS_HEAD_SIZE_OFFSET		0x1C
+
+#ifdef CONFIG_MIPS
+static inline int is_barebox_mips_head(const char *head)
+{
+	return !strcmp(head + MIPS_HEAD_MAGICWORD_OFFSET, "barebox");
+}
+#else
+static inline int is_barebox_mips_head(const char *head)
+{
+	return 0;
+}
+#endif
+
 #endif /* __FILE_TYPE_H */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 02/10] filetype: add is_barebox_head

[Jean-Christophe PLAGNIOL-VILLARD]

to detect if it's a barebox for the current running arch

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 include/filetype.h |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/filetype.h b/include/filetype.h
index c2af917..a5de4f7 100644
--- a/include/filetype.h
+++ b/include/filetype.h
@@ -66,4 +66,9 @@ static inline int is_barebox_mips_head(const char *head)
 }
 #endif
 
+static inline int is_barebox_head(const char *head)
+{
+	return is_barebox_arm_head(head) || is_barebox_mips_head(head);
+}
+
 #endif /* __FILE_TYPE_H */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 03/10] at91: dump mux command: make it depends on COMMAND_SUPPORT

[Jean-Christophe PLAGNIOL-VILLARD]

so in bootstrap we do not compile it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/Kconfig |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index fcba7fb..0fd9122 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -479,8 +479,12 @@ config CALAO_MB_QIL_A9260
 	bool "MB-QIL A9260 Motherboard Board support"
 	depends on MACH_QIL_A9260
 
+if COMMAND_SUPPORT
+
 config CMD_AT91MUX
 	bool "at91mux dump command"
 	default y
 
 endif
+
+endif
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 04/10] at91: add test commamd to emulate bootrom boot

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/Kconfig         |    6 +++
 arch/arm/mach-at91/Makefile        |    1 +
 arch/arm/mach-at91/boot_test_cmd.c |   95 ++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 arch/arm/mach-at91/boot_test_cmd.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fd9122..567c9d1 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -485,6 +485,12 @@ config CMD_AT91MUX
 	bool "at91mux dump command"
 	default y
 
+config CMD_AT91_BOOT_TEST
+	bool "at91_boot_test"
+	help
+	  allow to upload a boot binary to sram and execute it
+	  useful to test bootstrap or barebox lowlevel init
+
 endif
 
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 53b4dd8..4404d23 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,4 +1,5 @@
 obj-y += setup.o clock.o gpio.o
+obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o
 
 lowlevel_init-y = at91sam926x_lowlevel_init.o
 lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
diff --git a/arch/arm/mach-at91/boot_test_cmd.c b/arch/arm/mach-at91/boot_test_cmd.c
new file mode 100644
index 0000000..aa5c020
--- /dev/null
+++ b/arch/arm/mach-at91/boot_test_cmd.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#include <common.h>
+#include <command.h>
+#include <libbb.h>
+#include <getopt.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <malloc.h>
+#include <errno.h>
+
+static int do_at91_boot_test(int argc, char *argv[])
+{
+	int opt;
+	u32 *buf32;
+	void *buf;
+	void (*jump)(void) = NULL;
+	int fd;
+	int ret = 1;
+	char *sram = "/dev/sram0";
+	u32 read_size, write_size;
+	u32 tmp = 0;
+
+	while ((opt = getopt(argc, argv, "j:s:")) > 0) {
+		switch (opt) {
+		case 'j':
+			jump = (void*)simple_strtoul(optarg, NULL, 0);
+			break;
+		case 's':
+			sram = optarg;
+			break;
+		default:
+			return COMMAND_ERROR_USAGE;
+		}
+	}
+
+	if (argc < optind + 1)
+		return COMMAND_ERROR_USAGE;
+
+	buf32 = buf = read_file(argv[optind], &read_size);
+	if (!buf)
+		return -EINVAL;
+
+	write_size = buf32[5];
+
+	printf("size of the size %d\n", read_size);
+	printf("size to load in sram %d\n", write_size);
+
+	if (write_size > read_size) {
+		printf("file smaller than requested sram loading size (%d < %d)\n", write_size, read_size);
+		goto err;
+	}
+
+	fd = open(sram, O_WRONLY);
+	if (fd < 0) {
+		printf("could not open %s: %s\n", sram, errno_str());
+		ret = fd;
+		goto err;
+	}
+
+	while (write_size) {
+		tmp = write(fd, buf, write_size);
+		if (tmp < 0) {
+			perror("write");
+			goto err_open;
+		}
+		buf += tmp;
+		write_size -= tmp;
+	}
+
+	shutdown_barebox();
+
+	jump();
+
+err_open:
+	close(fd);
+err:
+	free(buf);
+	return ret;
+}
+
+BAREBOX_CMD_HELP_START(at91_boot_test)
+BAREBOX_CMD_HELP_USAGE("at91_boot_test [-j <jump addr>] [-s <sram>] file\n")
+BAREBOX_CMD_HELP_SHORT("upload the binary to sram and jump as will do the romcode\n")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(at91_boot_test)
+	.cmd		= do_at91_boot_test,
+	.usage		= "upload the binary to sram and jump as will do the romcode",
+	BAREBOX_CMD_HELP(cmd_at91_boot_test_help)
+BAREBOX_CMD_END
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 05/10] at91sam926x: lowlevel add external boot support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/at91sam926x_lowlevel_init.c |   20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
index cfae982..4dec275 100644
--- a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
+++ b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
@@ -36,10 +36,19 @@ static void inline pmc_check_mckrdy(void)
 	} while (!(r & AT91_PMC_MCKRDY));
 }
 
+static int inline running_in_sram(void)
+{
+	u32 addr = get_pc();
+
+	addr >>= 28;
+	return addr == 0;
+}
+
 void __naked __bare_init reset(void)
 {
 	u32 r;
 	int i;
+	int in_sram = running_in_sram();
 
 	common_reset();
 
@@ -74,7 +83,7 @@ void __naked __bare_init reset(void)
 	 * PMC Check if the PLL is already initialized
 	 */
 	r = at91_pmc_read(AT91_PMC_MCKR);
-	if (r & AT91_PMC_CSS)
+	if (r & AT91_PMC_CSS && !in_sram)
 		goto end;
 
 	/*
@@ -117,7 +126,7 @@ void __naked __bare_init reset(void)
 	 * SDRAMC Check if Refresh Timer Counter is already initialized
 	 */
 	r = at91_sys_read(AT91_SDRAMC_TR);
-	if (r)
+	if (r && !in_sram)
 		goto end;
 
 	/* SDRAMC_MR : Normal Mode */
@@ -170,6 +179,13 @@ void __naked __bare_init reset(void)
 	/* MATRIX_MCFG - REMAP all masters */
 	at91_sys_write(AT91_MATRIX_MCFG0, 0x1FF);
 #endif
+	/*
+	 * When boot from external boot
+	 * we need to enable mck and ohter clock
+	 * so enable all of them
+	 * We will shutdown what we don't need later
+	 */
+	at91_pmc_write(AT91_PMC_PCER, 0xffffffff);
 
 end:
 	board_init_lowlevel_return();
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 06/10] at91: sam926x: switch lowlevel param to c code

[Jean-Christophe PLAGNIOL-VILLARD]

Instead of hardcode define use a struct that the board fill

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/at91sam9263ek/Makefile             |    4 +
 arch/arm/boards/at91sam9263ek/config.h             |   99 +-------------
 arch/arm/boards/at91sam9263ek/lowlevel_init.c      |  104 +++++++++++++++
 arch/arm/boards/mmccpu/Makefile                    |    4 +
 arch/arm/boards/mmccpu/config.h                    |  130 +------------------
 arch/arm/boards/mmccpu/lowlevel_init.c             |  135 ++++++++++++++++++++
 arch/arm/boards/pm9261/Makefile                    |    4 +
 arch/arm/boards/pm9261/config.h                    |   99 +-------------
 arch/arm/boards/pm9261/lowlevel_init.c             |  102 +++++++++++++++
 arch/arm/boards/pm9263/Makefile                    |    4 +
 arch/arm/boards/pm9263/config.h                    |  115 +----------------
 arch/arm/boards/pm9263/lowlevel_init.c             |  121 ++++++++++++++++++
 arch/arm/mach-at91/at91sam926x_lowlevel_init.c     |   64 ++++++----
 .../mach-at91/include/mach/at91_lowlevel_init.h    |   33 +++++
 14 files changed, 576 insertions(+), 442 deletions(-)
 rewrite arch/arm/boards/at91sam9263ek/config.h (95%)
 create mode 100644 arch/arm/boards/at91sam9263ek/lowlevel_init.c
 rewrite arch/arm/boards/mmccpu/config.h (97%)
 create mode 100644 arch/arm/boards/mmccpu/lowlevel_init.c
 rewrite arch/arm/boards/pm9261/config.h (95%)
 create mode 100644 arch/arm/boards/pm9261/lowlevel_init.c
 rewrite arch/arm/boards/pm9263/config.h (97%)
 create mode 100644 arch/arm/boards/pm9263/lowlevel_init.c
 create mode 100644 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h

diff --git a/arch/arm/boards/at91sam9263ek/Makefile b/arch/arm/boards/at91sam9263ek/Makefile
index eb072c0..b6460c3 100644
--- a/arch/arm/boards/at91sam9263ek/Makefile
+++ b/arch/arm/boards/at91sam9263ek/Makefile
@@ -1 +1,5 @@
 obj-y += init.o
+
+obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
+
+pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
diff --git a/arch/arm/boards/at91sam9263ek/config.h b/arch/arm/boards/at91sam9263ek/config.h
dissimilarity index 95%
index 14eb4fe..cc12040 100644
--- a/arch/arm/boards/at91sam9263ek/config.h
+++ b/arch/arm/boards/at91sam9263ek/config.h
@@ -1,93 +1,6 @@
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define AT91_MAIN_CLOCK		16367660	/* 16.367 MHz crystal */
-
-#define MASTER_PLL_MUL		171
-#define MASTER_PLL_DIV		14
-
-/* clocks */
-#define CONFIG_SYS_MOR_VAL						\
-		(AT91_PMC_MOSCEN |					\
-		 (255 << 8))		/* Main Oscillator Start-up Time */
-#define CONFIG_SYS_PLLAR_VAL						\
-		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-		 AT91_PMC_OUT |						\
-		 AT91_PMC_PLLCOUNT |	/* PLL Counter */		\
-		 (2 << 28) |		/* PLL Clock Frequency Range */	\
-		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR1_VAL		\
-		(AT91_PMC_CSS_SLOW |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR2_VAL		\
-		(AT91_PMC_CSS_PLLA |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-
-/* define PDC[31:16] as DATA[31:16] */
-#define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
-/* no pull-up for D[31:16] */
-#define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
-/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
-#define CONFIG_SYS_MATRIX_EBI0CSA_VAL					\
-	(AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |	\
-	 AT91_MATRIX_EBI0_CS1A_SDRAMC)
-
-/* SDRAM */
-/* SDRAMC_TR - Refresh Timer register */
-#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
-/* SDRAMC_CR - Configuration register*/
-#define CONFIG_SYS_SDRC_CR_VAL							\
-		(AT91_SDRAMC_NC_9 |						\
-		 AT91_SDRAMC_NR_13 |						\
-		 AT91_SDRAMC_NB_4 |						\
-		 AT91_SDRAMC_CAS_3 |						\
-		 AT91_SDRAMC_DBW_32 |						\
-		 (1 <<  8) |		/* Write Recovery Delay */		\
-		 (7 << 12) |		/* Row Cycle Delay */			\
-		 (2 << 16) |		/* Row Precharge Delay */		\
-		 (2 << 20) |		/* Row to Column Delay */		\
-		 (5 << 24) |		/* Active to Precharge Delay */		\
-		 (1 << 28))		/* Exit Self Refresh to Active Delay */
-
-/* Memory Device Register -> SDRAM */
-#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
-#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
-
-/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
-#define CONFIG_SYS_SMC_CS	0
-#define CONFIG_SYS_SMC_SETUP_VAL					\
-		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
-		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
-#define CONFIG_SYS_SMC_PULSE_VAL					\
-		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
-		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
-#define CONFIG_SYS_SMC_CYCLE_VAL	\
-		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
-#define CONFIG_SYS_SMC_MODE_VAL					\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
-
-/* user reset enable */
-#define CONFIG_SYS_RSTC_RMR_VAL			\
-		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
-
-/* Disable Watchdog */
-#define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
-
-#endif	/* __CONFIG_H */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK		16367660	/* 16.367 MHz crystal */
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/at91sam9263ek/lowlevel_init.c b/arch/arm/boards/at91sam9263ek/lowlevel_init.c
new file mode 100644
index 0000000..2f8b312
--- /dev/null
+++ b/arch/arm/boards/at91sam9263ek/lowlevel_init.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_PLL_MUL		171
+#define MASTER_PLL_DIV		14
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+	/* Disable Watchdog */
+	cfg->wdt_mr =
+		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+		AT91_WDT_WDV |
+		AT91_WDT_WDDIS |
+		AT91_WDT_WDD;
+
+	/* define PDC[31:16] as DATA[31:16] */
+	cfg->ebi_pio_pdr = 0xFFFF0000;
+	/* no pull-up for D[31:16] */
+	cfg->ebi_pio_ppudr = 0xFFFF0000;
+	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+	cfg->ebi_csa =
+		AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |
+		AT91_MATRIX_EBI0_CS1A_SDRAMC;
+
+	cfg->smc_cs = 0;
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_16 |
+		AT91_SMC_TDFMODE |
+		AT91_SMC_TDF_(6);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
+		AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
+		AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
+
+	cfg->pmc_mor =
+		AT91_PMC_MOSCEN |
+		(255 << 8);		/* Main Oscillator Start-up Time */
+	cfg->pmc_pllar =
+		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+		AT91_PMC_OUT |
+		AT91_PMC_PLLCOUNT |	/* PLL Counter */
+		(2 << 28) |		/* PLL Clock Frequency Range */
+		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr1 =
+		AT91_PMC_CSS_SLOW |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr2 =
+		AT91_PMC_CSS_PLLA |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+
+	/* SDRAM */
+	/* SDRAMC_TR - Refresh Timer register */
+	cfg->sdrc_tr1 = 0x13C;
+	/* SDRAMC_CR - Configuration register*/
+	cfg->sdrc_cr =
+		AT91_SDRAMC_NC_9 |
+		AT91_SDRAMC_NR_13 |
+		AT91_SDRAMC_NB_4 |
+		AT91_SDRAMC_CAS_3 |
+		AT91_SDRAMC_DBW_32 |
+		(1 <<  8) |		/* Write Recovery Delay */
+		(7 << 12) |		/* Row Cycle Delay */
+		(2 << 16) |		/* Row Precharge Delay */
+		(2 << 20) |		/* Row to Column Delay */
+		(5 << 24) |		/* Active to Precharge Delay */
+		(1 << 28);		/* Exit Self Refresh to Active Delay */
+
+	/* Memory Device Register -> SDRAM */
+	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+	/* SDRAM_TR */
+	cfg->sdrc_tr2 = 1200;
+
+	/* user reset enable */
+	cfg->rstc_rmr =
+		AT91_RSTC_KEY |
+		AT91_RSTC_PROCRST |
+		AT91_RSTC_RSTTYP_WAKEUP |
+		AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/boards/mmccpu/Makefile b/arch/arm/boards/mmccpu/Makefile
index eb072c0..b6460c3 100644
--- a/arch/arm/boards/mmccpu/Makefile
+++ b/arch/arm/boards/mmccpu/Makefile
@@ -1 +1,5 @@
 obj-y += init.o
+
+obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
+
+pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
diff --git a/arch/arm/boards/mmccpu/config.h b/arch/arm/boards/mmccpu/config.h
dissimilarity index 97%
index e6215dc..c896a93 100644
--- a/arch/arm/boards/mmccpu/config.h
+++ b/arch/arm/boards/mmccpu/config.h
@@ -1,124 +1,6 @@
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define AT91_MAIN_CLOCK		18432000
-
-/* values */
-#define MASTER_PLL_MUL		54
-#define MASTER_PLL_DIV		4
-
-/* clocks */
-#define CONFIG_SYS_MOR_VAL						\
-		(AT91_PMC_MOSCEN |					\
-		 (255 << 8))		/* Main Oscillator Start-up Time */
-#define CONFIG_SYS_PLLAR_VAL						\
-		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-		 AT91_PMC_OUT |						\
-		 AT91_PMC_PLLCOUNT |	/* PLL Counter */		\
-		 (2 << 28) |		/* PLL Clock Frequency Range */	\
-		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR1_VAL		\
-		(AT91_PMC_CSS_SLOW |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR2_VAL		\
-		(AT91_PMC_CSS_PLLA |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-
-/* define PDC[31:16] as DATA[31:16] */
-#define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
-/* no pull-up for D[31:16] */
-#define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
-/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 1.8V memories */
-#define CONFIG_SYS_MATRIX_EBI0CSA_VAL					\
-	(AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_1_8V |	\
-	 AT91_MATRIX_EBI0_CS1A_SDRAMC | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA)
-
-/* SDRAM */
-/* SDRAMC_TR - Refresh Timer register */
-#define CONFIG_SYS_SDRC_TR_VAL1		0x13c
-/* SDRAMC_CR - Configuration register*/
-#define CONFIG_SYS_SDRC_CR_VAL							\
-		(AT91_SDRAMC_NC_9 |						\
-		 AT91_SDRAMC_NR_13 |						\
-		 AT91_SDRAMC_NB_4 |						\
-		 AT91_SDRAMC_CAS_3 |						\
-		 AT91_SDRAMC_DBW_32 |						\
-		 (2 <<  8) |	/* tWR -  Write Recovery Delay */		\
-		 (8 << 12) |	/* tRC -  Row Cycle Delay */			\
-		 (2 << 16) |	/* tRP -  Row Precharge Delay */		\
-		 (2 << 20) |	/* tRCD - Row to Column Delay */		\
-		 (5 << 24) |	/* tRAS - Active to Precharge Delay */		\
-		 (12 << 28))	/* tXSR - Exit Self Refresh to Active Delay */
-
-/* Memory Device Register -> SDRAM */
-#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
-#define CONFIG_SYS_SDRC_TR_VAL2		780		/* SDRAM_TR */
-
-/* setup CS0 (NOR Flash) - 16-bit */
-#define CONFIG_SYS_SMC_CS	0
-#if 1
-#define CONFIG_SYS_SMC_SETUP_VAL					\
-		(AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |	\
-		 AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0))
-#define CONFIG_SYS_SMC_PULSE_VAL					\
-		(AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |	\
-		 AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13))
-#define CONFIG_SYS_SMC_CYCLE_VAL	\
-		(AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16))
-#define CONFIG_SYS_SMC_MODE_VAL					\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
-#elif 0	/* slow setup */
-#define CONFIG_SYS_SMC_SETUP_VAL					\
-		(AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |	\
-		 AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0))
-#define CONFIG_SYS_SMC_PULSE_VAL					\
-		(AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |	\
-		 AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13))
-#define CONFIG_SYS_SMC_CYCLE_VAL	\
-		(AT91_SMC_NWECYCLE_(0xd00) | AT91_SMC_NRDCYCLE_(0xd00))
-#define CONFIG_SYS_SMC_MODE_VAL					\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(1))
-#else	/* RONETIX' original values */
-#define CONFIG_SYS_SMC_SETUP_VAL					\
-		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
-		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
-#define CONFIG_SYS_SMC_PULSE_VAL					\
-		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
-		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
-#define CONFIG_SYS_SMC_CYCLE_VAL	\
-		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
-#define CONFIG_SYS_SMC_MODE_VAL					\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
-#endif
-
-/* user reset enable */
-#define CONFIG_SYS_RSTC_RMR_VAL			\
-		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
-
-/* Disable Watchdog */
-#define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
-
-#endif	/* __CONFIG_H */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK		18432000
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/mmccpu/lowlevel_init.c b/arch/arm/boards/mmccpu/lowlevel_init.c
new file mode 100644
index 0000000..68c609f
--- /dev/null
+++ b/arch/arm/boards/mmccpu/lowlevel_init.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_PLL_MUL		54
+#define MASTER_PLL_DIV		4
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+	/* Disable Watchdog */
+	cfg->wdt_mr =
+		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+		AT91_WDT_WDV |
+		AT91_WDT_WDDIS |
+		AT91_WDT_WDD;
+
+	/* define PDC[31:16] as DATA[31:16] */
+	cfg->ebi_pio_pdr = 0xFFFF0000;
+	/* no pull-up for D[31:16] */
+	cfg->ebi_pio_ppudr = 0xFFFF0000;
+	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+	cfg->ebi_csa =
+		AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_1_8V |
+		AT91_MATRIX_EBI0_CS1A_SDRAMC |
+		AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA;
+
+	cfg->smc_cs = 0;
+#if 1
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_16 |
+		AT91_SMC_TDFMODE |
+		AT91_SMC_TDF_(6);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |
+		AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |
+		AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0);
+#elif 0	/* slow setup */
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_16 |
+		AT91_SMC_TDFMODE |
+		AT91_SMC_TDF_(1);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(0xd00) | AT91_SMC_NRDCYCLE_(0xd00);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |
+		AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |
+		AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0);
+#else	/* RONETIX' original values */
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_16 |
+		AT91_SMC_TDFMODE |
+		AT91_SMC_TDF_(6);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
+		AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
+		AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
+#endif
+
+	cfg->pmc_mor =
+		AT91_PMC_MSCEN |
+		(255 << 8);		/* Main Oscillator Start-up Time */
+	cfg->pmc_pllar =
+		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+		AT91_PMC_OUT |
+		AT91_PMC_PLLCOUNT |	/* PLL Counter */
+		(2 << 28) |		/* PLL Clock Frequency Range */
+		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr1 =
+		AT91_PMC_CSS_SLOW |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr2 =
+		AT91_PMC_CSS_PLLA |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+
+	/* SDRAM */
+	/* SDRAMC_TR - Refresh Timer register */
+	cfg->sdrc_tr1 = 0x13C;
+	/* SDRAMC_CR - Configuration register*/
+	cfg->sdrc_cr =
+		AT91_SDRAMC_NC_9 |
+		AT91_SDRAMC_NR_13 |
+		AT91_SDRAMC_NB_4 |
+		AT91_SDRAMC_CAS_3 |
+		AT91_SDRAMC_DBW_32 |
+		(2 <<  8) |	/* tWR -  Write Recovery Delay */
+		(8 << 12) |	/* tRC -  Row Cycle Delay */
+		(2 << 16) |	/* tRP -  Row Precharge Delay */
+		(2 << 20) |	/* tRCD - Row to Column Delay */
+		(5 << 24) |	/* tRAS - Active to Precharge Delay */
+		(12 << 28);	/* tXSR - Exit Self Refresh to Active Delay */
+
+	/* Memory Device Register -> SDRAM */
+	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+	/* SDRAM_TR */
+	cfg->sdrc_tr2 = 780;
+
+	/* user reset enable */
+	cfg->rstc_rmr =
+		AT91_RSTC_KEY |
+		AT91_RSTC_PROCRST |
+		AT91_RSTC_RSTTYP_WAKEUP |
+		AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
index eb072c0..b6460c3 100644
--- a/arch/arm/boards/pm9261/Makefile
+++ b/arch/arm/boards/pm9261/Makefile
@@ -1 +1,5 @@
 obj-y += init.o
+
+obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
+
+pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
diff --git a/arch/arm/boards/pm9261/config.h b/arch/arm/boards/pm9261/config.h
dissimilarity index 95%
index 4602aa7..006820c 100644
--- a/arch/arm/boards/pm9261/config.h
+++ b/arch/arm/boards/pm9261/config.h
@@ -1,93 +1,6 @@
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
-
-#define MASTER_PLL_DIV		15
-#define MASTER_PLL_MUL		162
-#define MAIN_PLL_DIV		2
-
-/* clocks */
-#define CONFIG_SYS_MOR_VAL						\
-		(AT91_PMC_MOSCEN |					\
-		 (255 << 8))		/* Main Oscillator Start-up Time */
-#define CONFIG_SYS_PLLAR_VAL						\
-		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-		 AT91_PMC_OUT |						\
-		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR1_VAL		\
-		(AT91_PMC_CSS_SLOW |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR2_VAL		\
-		(AT91_PMC_CSS_PLLA |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-
-/* define PDC[31:16] as DATA[31:16] */
-#define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
-/* no pull-up for D[31:16] */
-#define CONFIG_SYS_PIOC_PPUDR_VAL	0xFFFF0000
-
-/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
-#define CONFIG_SYS_MATRIX_EBICSA_VAL		\
-       (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
-
-/* SDRAM */
-/* SDRAMC_TR - Refresh Timer register */
-#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
-/* SDRAMC_CR - Configuration register*/
-#define CONFIG_SYS_SDRC_CR_VAL							\
-		(AT91_SDRAMC_NC_9 |						\
-		 AT91_SDRAMC_NR_13 |						\
-		 AT91_SDRAMC_NB_4 |						\
-		 AT91_SDRAMC_CAS_3 |						\
-		 AT91_SDRAMC_DBW_32 |						\
-		 (1 <<  8) |		/* Write Recovery Delay */		\
-		 (7 << 12) |		/* Row Cycle Delay */			\
-		 (3 << 16) |		/* Row Precharge Delay */		\
-		 (2 << 20) |		/* Row to Column Delay */		\
-		 (5 << 24) |		/* Active to Precharge Delay */		\
-		 (1 << 28))		/* Exit Self Refresh to Active Delay */
-
-/* Memory Device Register -> SDRAM */
-#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
-#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
-
-/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
-#define CONFIG_SYS_SMC_CS	0
-#define CONFIG_SYS_SMC_SETUP_VAL					\
-		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
-		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
-#define CONFIG_SYS_SMC_PULSE_VAL					\
-		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
-		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
-#define CONFIG_SYS_SMC_CYCLE_VAL	\
-		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
-#define CONFIG_SYS_SMC_MODE_VAL					\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
-
-/* user reset enable */
-#define CONFIG_SYS_RSTC_RMR_VAL			\
-		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
-
-/* Disable Watchdog */
-#define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
-
-#endif	/* __CONFIG_H */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK		18432000	/* 18.432 MHz crystal */
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/pm9261/lowlevel_init.c b/arch/arm/boards/pm9261/lowlevel_init.c
new file mode 100644
index 0000000..91a64b4
--- /dev/null
+++ b/arch/arm/boards/pm9261/lowlevel_init.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_PLL_DIV		15
+#define MASTER_PLL_MUL		162
+#define MAIN_PLL_DIV		2
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+	/* Disable Watchdog */
+	cfg->wdt_mr =
+		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+		AT91_WDT_WDV |
+		AT91_WDT_WDDIS |
+		AT91_WDT_WDD;
+
+	/* define PDC[31:16] as DATA[31:16] */
+	cfg->ebi_pio_pdr = 0xFFFF0000;
+	/* no pull-up for D[31:16] */
+	cfg->ebi_pio_ppudr = 0xFFFF0000;
+	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+	cfg->ebi_csa =
+		AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC;
+
+	cfg->smc_cs = 0;
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_16 |
+		AT91_SMC_TDFMODE |
+		AT91_SMC_TDF_(6);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
+		AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
+		AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
+
+	cfg->pmc_mor =
+		AT91_PMC_MOSCEN |
+		(255 << 8);		/* Main Oscillator Start-up Time */
+	cfg->pmc_pllar =
+		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+		AT91_PMC_OUT |
+		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr1 =
+		AT91_PMC_CSS_SLOW |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr2 =
+		AT91_PMC_CSS_PLLA |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+
+	/* SDRAM */
+	/* SDRAMC_TR - Refresh Timer register */
+	cfg->sdrc_tr1 = 0x13C;
+	/* SDRAMC_CR - Configuration register*/
+	cfg->sdrc_cr =
+		AT91_SDRAMC_NC_9 |
+		AT91_SDRAMC_NR_13 |
+		AT91_SDRAMC_NB_4 |
+		AT91_SDRAMC_CAS_3 |
+		AT91_SDRAMC_DBW_32 |
+		(1 <<  8) |		/* Write Recovery Delay */
+		(7 << 12) |		/* Row Cycle Delay */
+		(3 << 16) |		/* Row Precharge Delay */
+		(2 << 20) |		/* Row to Column Delay */
+		(5 << 24) |		/* Active to Precharge Delay */
+		(1 << 28);		/* Exit Self Refresh to Active Delay */
+
+	/* Memory Device Register -> SDRAM */
+	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+	/* SDRAM_TR */
+	cfg->sdrc_tr2 = 1200;
+
+	/* user reset enable */
+	cfg->rstc_rmr =
+		AT91_RSTC_KEY |
+		AT91_RSTC_PROCRST |
+		AT91_RSTC_RSTTYP_WAKEUP |
+		AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/boards/pm9263/Makefile b/arch/arm/boards/pm9263/Makefile
index eb072c0..b6460c3 100644
--- a/arch/arm/boards/pm9263/Makefile
+++ b/arch/arm/boards/pm9263/Makefile
@@ -1 +1,5 @@
 obj-y += init.o
+
+obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
+
+pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel_init.o
diff --git a/arch/arm/boards/pm9263/config.h b/arch/arm/boards/pm9263/config.h
dissimilarity index 97%
index 322c1f3..9066613 100644
--- a/arch/arm/boards/pm9263/config.h
+++ b/arch/arm/boards/pm9263/config.h
@@ -1,109 +1,6 @@
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define AT91_MAIN_CLOCK	18432000
-
-#define MASTER_PLL_DIV		6
-#define MASTER_PLL_MUL		65
-#define MAIN_PLL_DIV		2	/* 2 or 4 */
-
-/* clocks */
-#define CONFIG_SYS_MOR_VAL						\
-		(AT91_PMC_MOSCEN |					\
-		 (255 << 8))		/* Main Oscillator Start-up Time */
-#define CONFIG_SYS_PLLAR_VAL						\
-		(AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
-		 AT91_PMC_OUT |						\
-		 AT91_PMC_PLLCOUNT |	/* PLL Counter */		\
-		 (2 << 28) |		/* PLL Clock Frequency Range */	\
-		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
-
-#if (MAIN_PLL_DIV == 2)
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR1_VAL		\
-		(AT91_PMC_CSS_SLOW |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-/* PCK/2 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR2_VAL		\
-		(AT91_PMC_CSS_PLLA |	\
-		 AT91_PMC_PRES_1 |	\
-		 AT91SAM9_PMC_MDIV_2 |	\
-		 AT91_PMC_PDIV_1)
-#else
-/* PCK/4 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR1_VAL			\
-		(AT91_PMC_CSS_SLOW |		\
-		 AT91_PMC_PRES_1 |		\
-		 AT91RM9200_PMC_MDIV_3 |	\
-		 AT91_PMC_PDIV_1)
-/* PCK/4 = MCK Master Clock from PLLA */
-#define	CONFIG_SYS_MCKR2_VAL			\
-		(AT91_PMC_CSS_PLLA |		\
-		 AT91_PMC_PRES_1 |		\
-		 AT91RM9200_PMC_MDIV_3 |	\
-		 AT91_PMC_PDIV_1)
-#endif
-/* define PDC[31:16] as DATA[31:16] */
-#define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
-/* no pull-up for D[31:16] */
-#define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
-/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
-#define CONFIG_SYS_MATRIX_EBI0CSA_VAL					\
-	(AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |	\
-	 AT91_MATRIX_EBI0_CS1A_SDRAMC)
-
-/* SDRAM */
-/* SDRAMC_TR - Refresh Timer register */
-#define CONFIG_SYS_SDRC_TR_VAL1		0x3AA
-/* SDRAMC_CR - Configuration register*/
-#define CONFIG_SYS_SDRC_CR_VAL							\
-		(AT91_SDRAMC_NC_9 |						\
-		 AT91_SDRAMC_NR_13 |						\
-		 AT91_SDRAMC_NB_4 |						\
-		 AT91_SDRAMC_CAS_2 |						\
-		 AT91_SDRAMC_DBW_32 |						\
-		 (2 <<  8) |	/* tWR -  Write Recovery Delay */		\
-		 (7 << 12) |	/* tRC -  Row Cycle Delay */			\
-		 (2 << 16) |	/* tRP -  Row Precharge Delay */		\
-		 (2 << 20) |	/* tRCD - Row to Column Delay */		\
-		 (5 << 24) |	/* tRAS - Active to Precharge Delay */		\
-		 (8 << 28))	/* tXSR - Exit Self Refresh to Active Delay */
-
-/* Memory Device Register -> SDRAM */
-#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
-#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
-
-/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
-#define CONFIG_SYS_SMC_CS	0
-#define CONFIG_SYS_SMC_SETUP_VAL					\
-		(AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |	\
-		 AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
-#define CONFIG_SYS_SMC_PULSE_VAL					\
-		(AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |	\
-		 AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
-#define CONFIG_SYS_SMC_CYCLE_VAL	\
-		(AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
-#define CONFIG_SYS_SMC_MODE_VAL					\
-		(AT91_SMC_READMODE | AT91_SMC_WRITEMODE |	\
-		 AT91_SMC_DBW_16 |				\
-		 AT91_SMC_TDFMODE |				\
-		 AT91_SMC_TDF_(6))
-
-/* user reset enable */
-#define CONFIG_SYS_RSTC_RMR_VAL			\
-		(AT91_RSTC_KEY |		\
-		AT91_RSTC_PROCRST |		\
-		AT91_RSTC_RSTTYP_WAKEUP |	\
-		AT91_RSTC_RSTTYP_WATCHDOG)
-
-/* Disable Watchdog */
-#define CONFIG_SYS_WDTC_WDMR_VAL				\
-		(AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |	\
-		 AT91_WDT_WDV |					\
-		 AT91_WDT_WDDIS |				\
-		 AT91_WDT_WDD)
-
-
-#endif	/* __CONFIG_H */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK	18432000
+
+#endif	/* __CONFIG_H */
diff --git a/arch/arm/boards/pm9263/lowlevel_init.c b/arch/arm/boards/pm9263/lowlevel_init.c
new file mode 100644
index 0000000..6336d51
--- /dev/null
+++ b/arch/arm/boards/pm9263/lowlevel_init.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_PLL_DIV		6
+#define MASTER_PLL_MUL		65
+#define MAIN_PLL_DIV		2	/* 2 or 4 */
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+	/* Disable Watchdog */
+	cfg->wdt_mr =
+		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+		AT91_WDT_WDV |
+		AT91_WDT_WDDIS |
+		AT91_WDT_WDD;
+
+	/* define PDC[31:16] as DATA[31:16] */
+	cfg->ebi_pio_pdr = 0xFFFF0000;
+	/* no pull-up for D[31:16] */
+	cfg->ebi_pio_ppudr = 0xFFFF0000;
+	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+	cfg->ebi_csa =
+		AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |
+		AT91_MATRIX_EBI0_CS1A_SDRAMC;
+
+	cfg->smc_cs = 0;
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_16 |
+		AT91_SMC_TDFMODE |
+		AT91_SMC_TDF_(6);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
+		AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
+		AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
+
+	cfg->pmc_mor =
+		AT91_PMC_MOSCEN |
+		(255 << 8);		/* Main Oscillator Start-up Time */
+	cfg->pmc_pllar =
+		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+		AT91_PMC_OUT |
+		AT91_PMC_PLLCOUNT |	/* PLL Counter */
+		(2 << 28) |		/* PLL Clock Frequency Range */
+		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+
+	if (MAIN_PLL_DIV == 2) {
+		/* PCK/2 = MCK Master Clock from PLLA */
+		cfg->pmc_mckr1 =
+			AT91_PMC_CSS_SLOW |
+			AT91_PMC_PRES_1 |
+			AT91SAM9_PMC_MDIV_2 |
+			AT91_PMC_PDIV_1;
+		/* PCK/2 = MCK Master Clock from PLLA */
+		cfg->pmc_mckr2 =
+			AT91_PMC_CSS_PLLA |
+			AT91_PMC_PRES_1 |
+			AT91SAM9_PMC_MDIV_2 |
+			AT91_PMC_PDIV_1;
+	} else {
+		/* PCK/2 = MCK Master Clock from PLLA */
+		cfg->pmc_mckr1 =
+			AT91_PMC_CSS_SLOW |
+			AT91_PMC_PRES_1 |
+			AT91RM9200_PMC_MDIV_3 |
+			AT91_PMC_PDIV_1;
+		/* PCK/2 = MCK Master Clock from PLLA */
+		cfg->pmc_mckr2 =
+			AT91_PMC_CSS_PLLA |
+			AT91_PMC_PRES_1 |
+			AT91RM9200_PMC_MDIV_3 |
+			AT91_PMC_PDIV_1;
+	}
+
+	/* SDRAM */
+	/* SDRAMC_TR - Refresh Timer register */
+	cfg->sdrc_tr1 = 0x3AA;
+	/* SDRAMC_CR - Configuration register*/
+	cfg->sdrc_cr =
+		AT91_SDRAMC_NC_9 |
+		AT91_SDRAMC_NR_13 |
+		AT91_SDRAMC_NB_4 |
+		AT91_SDRAMC_CAS_2 |
+		AT91_SDRAMC_DBW_32 |
+		(2 <<  8) |	/* tWR -  Write Recovery Delay */
+		(7 << 12) |	/* tRC -  Row Cycle Delay */
+		(2 << 16) |	/* tRP -  Row Precharge Delay */
+		(2 << 20) |	/* tRCD - Row to Column Delay */
+		(5 << 24) |	/* tRAS - Active to Precharge Delay */
+		(8 << 28);	/* tXSR - Exit Self Refresh to Active Delay */
+
+	/* Memory Device Register -> SDRAM */
+	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+	/* SDRAM_TR */
+	cfg->sdrc_tr2 = 1200;
+
+	/* user reset enable */
+	cfg->rstc_rmr =
+		AT91_RSTC_KEY |
+		AT91_RSTC_PROCRST |
+		AT91_RSTC_RSTTYP_WAKEUP |
+		AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
index 4dec275..14afbc9 100644
--- a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
+++ b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
@@ -19,8 +19,10 @@
 #include <mach/at91sam9_matrix.h>
 #include <mach/at91sam9_sdramc.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at91_lowlevel_init.h>
 #include <mach/io.h>
 #include <init.h>
+#include <sizes.h>
 
 static void inline access_sdram(void)
 {
@@ -44,40 +46,41 @@ static int inline running_in_sram(void)
 	return addr == 0;
 }
 
-void __naked __bare_init reset(void)
+void __bare_init at91sam926x_lowlevel_init(void)
 {
 	u32 r;
 	int i;
 	int in_sram = running_in_sram();
+	struct at91sam926x_lowlevel_cfg cfg;
 
-	common_reset();
+	at91sam926x_lowlevel_board_config(&cfg);
 
-	__raw_writel(CONFIG_SYS_WDTC_WDMR_VAL, AT91_BASE_WDT + AT91_WDT_MR);
+	__raw_writel(cfg.wdt_mr, AT91_BASE_WDT + AT91_WDT_MR);
 
 	/* configure PIOx as EBI0 D[16-31] */
 #ifdef CONFIG_ARCH_AT91SAM9263
-	__raw_writel(CONFIG_SYS_PIOD_PDR_VAL1, AT91_BASE_PIOD + PIO_PDR);
-	__raw_writel(CONFIG_SYS_PIOD_PPUDR_VAL, AT91_BASE_PIOD + PIO_PUDR);
-	__raw_writel(CONFIG_SYS_PIOD_PPUDR_VAL, AT91_BASE_PIOD + PIO_ASR);
+	__raw_writel(cfg.ebi_pio_pdr, AT91_BASE_PIOD + PIO_PDR);
+	__raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOD + PIO_PUDR);
+	__raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOD + PIO_ASR);
 #else
-	__raw_writel(CONFIG_SYS_PIOC_PDR_VAL1, AT91_BASE_PIOC + PIO_PDR);
-	__raw_writel(CONFIG_SYS_PIOC_PPUDR_VAL, AT91_BASE_PIOC + PIO_PUDR);
+	__raw_writel(cfg.ebi_pio_pdr, AT91_BASE_PIOC + PIO_PDR);
+	__raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOC + PIO_PUDR);
 #endif
 
 #if defined(AT91_MATRIX_EBI0CSA)
-	at91_sys_write(AT91_MATRIX_EBI0CSA, CONFIG_SYS_MATRIX_EBI0CSA_VAL);
+	at91_sys_write(AT91_MATRIX_EBI0CSA, cfg.ebi_csa);
 #else /* AT91_MATRIX_EBICSA */
-	at91_sys_write(AT91_MATRIX_EBICSA, CONFIG_SYS_MATRIX_EBICSA_VAL);
+	at91_sys_write(AT91_MATRIX_EBICSA, cfg.ebi_csa);
 #endif
 
 	/* flash */
-	at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_MODE, CONFIG_SYS_SMC_MODE_VAL);
+	at91_smc_write(cfg.smc_cs, AT91_SMC_MODE, cfg.smc_mode);
 
-	at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_CYCLE, CONFIG_SYS_SMC_CYCLE_VAL);
+	at91_smc_write(cfg.smc_cs, AT91_SMC_CYCLE, cfg.smc_cycle);
 
-	at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_PULSE, CONFIG_SYS_SMC_PULSE_VAL);
+	at91_smc_write(cfg.smc_cs, AT91_SMC_PULSE, cfg.smc_pulse);
 
-	at91_smc_write(CONFIG_SYS_SMC_CS, AT91_SMC_SETUP, CONFIG_SYS_SMC_SETUP_VAL);
+	at91_smc_write(cfg.smc_cs, AT91_SMC_SETUP, cfg.smc_setup);
 
 	/*
 	 * PMC Check if the PLL is already initialized
@@ -89,7 +92,7 @@ void __naked __bare_init reset(void)
 	/*
 	 * Enable the Main Oscillator
 	 */
-	at91_pmc_write(AT91_CKGR_MOR, CONFIG_SYS_MOR_VAL);
+	at91_pmc_write(AT91_CKGR_MOR, cfg.pmc_mor);
 
 	do {
 		r = at91_pmc_read(AT91_PMC_SR);
@@ -98,7 +101,7 @@ void __naked __bare_init reset(void)
 	/*
 	 * PLLAR: x MHz for PCK
 	 */
-	at91_pmc_write(AT91_CKGR_PLLAR, CONFIG_SYS_PLLAR_VAL);
+	at91_pmc_write(AT91_CKGR_PLLAR, cfg.pmc_pllar);
 
 	do {
 		r = at91_pmc_read(AT91_PMC_SR);
@@ -107,14 +110,14 @@ void __naked __bare_init reset(void)
 	/*
 	 * PCK/x = MCK Master Clock from SLOW
 	 */
-	at91_pmc_write(AT91_PMC_MCKR, CONFIG_SYS_MCKR1_VAL);
+	at91_pmc_write(AT91_PMC_MCKR, cfg.pmc_mckr1);
 
 	pmc_check_mckrdy();
 
 	/*
 	 * PCK/x = MCK Master Clock from PLLA
 	 */
-	at91_pmc_write(AT91_PMC_MCKR, CONFIG_SYS_MCKR2_VAL);
+	at91_pmc_write(AT91_PMC_MCKR, cfg.pmc_mckr2);
 
 	pmc_check_mckrdy();
 
@@ -133,13 +136,13 @@ void __naked __bare_init reset(void)
 	at91_sys_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL);
 
 	/* SDRAMC_TR - Refresh Timer register */
-	at91_sys_write(AT91_SDRAMC_TR, CONFIG_SYS_SDRC_TR_VAL1);
+	at91_sys_write(AT91_SDRAMC_TR, cfg.sdrc_tr1);
 
 	/* SDRAMC_CR - Configuration register*/
-	at91_sys_write(AT91_SDRAMC_CR, CONFIG_SYS_SDRC_CR_VAL);
+	at91_sys_write(AT91_SDRAMC_CR, cfg.sdrc_cr);
 
 	/* Memory Device Type */
-	at91_sys_write(AT91_SDRAMC_MDR, CONFIG_SYS_SDRC_MDR_VAL);
+	at91_sys_write(AT91_SDRAMC_MDR, cfg.sdrc_mdr);
 
 	/* SDRAMC_MR : Precharge All */
 	at91_sys_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_PRECHARGE);
@@ -167,13 +170,13 @@ void __naked __bare_init reset(void)
 	access_sdram();
 
 	/* SDRAMC_TR : Refresh Timer Counter */
-	at91_sys_write(AT91_SDRAMC_TR, CONFIG_SYS_SDRC_TR_VAL2);
+	at91_sys_write(AT91_SDRAMC_TR, cfg.sdrc_tr2);
 
 	/* access SDRAM */
 	access_sdram();
 
 	/* User reset enable*/
-	at91_sys_write(AT91_RSTC_MR, CONFIG_SYS_RSTC_RMR_VAL);
+	at91_sys_write(AT91_RSTC_MR, cfg.rstc_rmr);
 
 #ifdef CONFIG_SYS_MATRIX_MCFG_REMAP
 	/* MATRIX_MCFG - REMAP all masters */
@@ -190,3 +193,18 @@ void __naked __bare_init reset(void)
 end:
 	board_init_lowlevel_return();
 }
+
+void __naked __bare_init reset(void)
+{
+	common_reset();
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+	arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
+	arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+	arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+#endif
+
+	at91sam926x_lowlevel_init();
+}
diff --git a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
new file mode 100644
index 0000000..29d9628
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#ifndef __AT91_LOWLEVEL_INIT_H__
+#define __AT91_LOWLEVEL_INIT_H__
+
+struct at91sam926x_lowlevel_cfg {
+	u32 wdt_mr;
+	u32 ebi_pio_pdr;
+	u32 ebi_pio_ppudr;
+	u32 ebi_csa;
+	u32 smc_cs;
+	u32 smc_mode;
+	u32 smc_cycle;
+	u32 smc_pulse;
+	u32 smc_setup;
+	u32 pmc_mor;
+	u32 pmc_pllar;
+	u32 pmc_mckr1;
+	u32 pmc_mckr2;
+	u32 sdrc_cr;
+	u32 sdrc_tr1;
+	u32 sdrc_mdr;
+	u32 sdrc_tr2;
+	u32 rstc_rmr;
+};
+
+void at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg);
+
+#endif /* __AT91_LOWLEVEL_INIT_H__ */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 07/10] at91: usb-a9263 add lowlevel init

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/usb-a926x/Makefile                 |    6 ++
 .../arm/boards/usb-a926x/usb_a9263_lowlevel_init.c |  111 ++++++++++++++++++++
 arch/arm/mach-at91/Kconfig                         |    1 +
 3 files changed, 118 insertions(+)
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c

diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile
index eb072c0..9511a76 100644
--- a/arch/arm/boards/usb-a926x/Makefile
+++ b/arch/arm/boards/usb-a926x/Makefile
@@ -1 +1,7 @@
 obj-y += init.o
+
+lowlevel_init-$(CONFIG_MACH_USB_A9263) = usb_a9263_lowlevel_init.o
+
+obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
+
+pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
diff --git a/arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c b/arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c
new file mode 100644
index 0000000..f6dc58e
--- /dev/null
+++ b/arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_CLOCK		180
+
+#if MASTER_CLOCK == 200
+#define MASTER_PLL_MUL		100
+#else
+#define MASTER_PLL_MUL		90
+#endif
+#define MASTER_PLL_DIV		6
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+	/* Disable Watchdog */
+	cfg->wdt_mr =
+		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+		AT91_WDT_WDV |
+		AT91_WDT_WDDIS |
+		AT91_WDT_WDD;
+
+	/* define PDC[31:16] as DATA[31:16] */
+	cfg->ebi_pio_pdr = 0xFFFF0000;
+	/* no pull-up for D[31:16] */
+	cfg->ebi_pio_ppudr = 0xFFFF0000;
+	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+	cfg->ebi_csa =
+		AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |
+		AT91_MATRIX_EBI0_CS1A_SDRAMC;
+
+	cfg->smc_cs = 3;
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_8 |
+		AT91_SMC_EXNWMODE_DISABLE |
+		AT91_SMC_TDF_(2);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0);
+
+	cfg->pmc_mor = AT91_PMC_OSCBYPASS;
+	cfg->pmc_pllar =
+		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+		AT91_PMC_PLLCOUNT |	/* PLL Counter */
+		(0 << 28) |		/* PLL Clock Frequency Range */
+		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr1 =
+		AT91_PMC_CSS_SLOW |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr2 =
+		AT91_PMC_CSS_PLLA |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+
+	/* SDRAM */
+	/* SDRAMC_TR - Refresh Timer register */
+	cfg->sdrc_tr1 = 0x13C;
+	/* SDRAMC_CR - Configuration register*/
+	cfg->sdrc_cr =
+		AT91_SDRAMC_NR_13 |
+		AT91_SDRAMC_NB_4 |
+		AT91_SDRAMC_CAS_2 |
+		AT91_SDRAMC_DBW_32 |
+		(2 <<  8) |		/* Write Recovery Delay */
+		(7 << 12) |		/* Row Cycle Delay */
+		(2 << 16) |		/* Row Precharge Delay */
+		(2 << 20) |		/* Row to Column Delay */
+		(5 << 24) |		/* Active to Precharge Delay */
+		(8 << 28);		/* Exit Self Refresh to Active Delay */
+
+	if (IS_ENABLED(CONFIG_AT91_HAVE_SRAM_128M))
+		cfg->sdrc_cr |= AT91_SDRAMC_NC_10;
+	else
+		cfg->sdrc_cr |= AT91_SDRAMC_NC_9;
+
+	/* Memory Device Register -> SDRAM */
+	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+	/* SDRAM_TR */
+	cfg->sdrc_tr2 = (MASTER_CLOCK * 7);
+
+	/* user reset enable */
+	cfg->rstc_rmr =
+		AT91_RSTC_KEY |
+		AT91_RSTC_PROCRST |
+		AT91_RSTC_RSTTYP_WAKEUP |
+		AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 567c9d1..2e43b10 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -357,6 +357,7 @@ config MACH_TNY_A9263
 
 config MACH_USB_A9263
 	bool "CALAO USB-A9263"
+	select MACH_HAS_LOWLEVEL_INIT
 	help
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 08/10] introduce common bootstrap code

[Jean-Christophe PLAGNIOL-VILLARD]

This will allow to have a generic code to create different bootstrap

As example
Barebox as TI Xloader
Barebox as AT91 Bootstrap

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 include/bootstrap.h    |   34 ++++++++++++++
 lib/Kconfig            |    2 +
 lib/Makefile           |    1 +
 lib/bootstrap/Kconfig  |   13 ++++++
 lib/bootstrap/Makefile |    3 ++
 lib/bootstrap/common.c |   24 ++++++++++
 lib/bootstrap/devfs.c  |  118 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/bootstrap/disk.c   |   37 +++++++++++++++
 8 files changed, 232 insertions(+)
 create mode 100644 include/bootstrap.h
 create mode 100644 lib/bootstrap/Kconfig
 create mode 100644 lib/bootstrap/Makefile
 create mode 100644 lib/bootstrap/common.c
 create mode 100644 lib/bootstrap/devfs.c
 create mode 100644 lib/bootstrap/disk.c

diff --git a/include/bootstrap.h b/include/bootstrap.h
new file mode 100644
index 0000000..0fa6b83
--- /dev/null
+++ b/include/bootstrap.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#ifndef __BOOSTRAP_H__
+#define __BOOSTRAP_H__
+
+#define bootstrap_err(fmt, arg...) printf(fmt, ##arg)
+
+void bootstrap_boot(int (*func)(void), bool barebox);
+
+#ifdef CONFIG_BOOTSTRAP_DEVFS
+void* bootstrap_read_devfs(char *devname, bool use_bb, int offset,
+			   int default_size, int max_size);
+#else
+static inline void* bootstrap_read_devfs(char *devname, bool use_bb, int offset,
+			   int default_size, int max_size)
+{
+	return NULL;
+}
+#endif
+
+#ifdef CONFIG_BOOTSTRAP_DISK
+void* bootstrap_read_disk(char *devname, char *fstype);
+#else
+static inline void* bootstrap_read_disk(char *devname, char *fstype)
+{
+	return NULL;
+}
+#endif
+
+#endif /* __BOOSTRAP_H__ */
diff --git a/lib/Kconfig b/lib/Kconfig
index db8a6ad..4578353 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -52,4 +52,6 @@ config LIBMTD
 
 source lib/gui/Kconfig
 
+source lib/bootstrap/Kconfig
+
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index 85f4ec9..43f6ea3 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_BOOTSTRAP)	+= bootstrap/
 obj-y			+= ctype.o
 obj-y			+= rbtree.o
 obj-y			+= display_options.o
diff --git a/lib/bootstrap/Kconfig b/lib/bootstrap/Kconfig
new file mode 100644
index 0000000..558da00
--- /dev/null
+++ b/lib/bootstrap/Kconfig
@@ -0,0 +1,13 @@
+menuconfig BOOTSTRAP
+	bool "Library bootstrap routines           "
+	depends on SHELL_NONE
+
+if BOOTSTRAP
+
+config BOOTSTRAP_DEVFS
+	bool "devfs support"
+
+config BOOTSTRAP_DISK
+	bool "disk support"
+
+endif
diff --git a/lib/bootstrap/Makefile b/lib/bootstrap/Makefile
new file mode 100644
index 0000000..cbaa49f
--- /dev/null
+++ b/lib/bootstrap/Makefile
@@ -0,0 +1,3 @@
+obj-y				+= common.o
+obj-$(CONFIG_BOOTSTRAP_DEVFS)	+= devfs.o
+obj-$(CONFIG_BOOTSTRAP_DISK)	+= disk.o
diff --git a/lib/bootstrap/common.c b/lib/bootstrap/common.c
new file mode 100644
index 0000000..38ec272
--- /dev/null
+++ b/lib/bootstrap/common.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <bootstrap.h>
+#include <filetype.h>
+
+void bootstrap_boot(int (*func)(void), bool barebox)
+{
+	if (!func)
+		return;
+
+	if (barebox && !is_barebox_head((void*)func))
+		return;
+
+	shutdown_barebox();
+	func();
+
+	while (1);
+}
diff --git a/lib/bootstrap/devfs.c b/lib/bootstrap/devfs.c
new file mode 100644
index 0000000..25d07c7
--- /dev/null
+++ b/lib/bootstrap/devfs.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <partition.h>
+#include <nand.h>
+#include <driver.h>
+#include <linux/mtd/mtd.h>
+#include <fcntl.h>
+#include <filetype.h>
+#include <sizes.h>
+#include <errno.h>
+#include <malloc.h>
+#include <bootstrap.h>
+
+#if defined(CONFIG_ARM) || defined(CONFIG_MIPS)
+#if defined(CONFIG_ARM)
+#define BAREBOX_HEAD_SIZE		ARM_HEAD_SIZE
+#define BAREBOX_HEAD_SIZE_OFFSET	ARM_HEAD_SIZE_OFFSET
+#elif defined(CONFIG_MIPS)
+#define BAREBOX_HEAD_SIZE		MIPS_HEAD_SIZE
+#define BAREBOX_HEAD_SIZE_OFFSET	MIPS_HEAD_SIZE_OFFSET
+#endif
+
+static void *read_image_head(const char *name)
+{
+	void *header = xmalloc(BAREBOX_HEAD_SIZE);
+	struct cdev *cdev;
+	int ret;
+
+	cdev = cdev_open(name, O_RDONLY);
+	if (!cdev) {
+		bootstrap_err("failed to open partition\n");
+		return NULL;
+	}
+
+	ret = cdev_read(cdev, header, BAREBOX_HEAD_SIZE, 0, 0);
+	cdev_close(cdev);
+
+	if (ret != BAREBOX_HEAD_SIZE) {
+		bootstrap_err("failed to read from partition\n");
+		return NULL;
+	}
+
+	return header;
+}
+
+static unsigned int get_image_size(void *head)
+{
+	unsigned int ret = 0;
+	unsigned int *psize = head + BAREBOX_HEAD_SIZE_OFFSET;
+
+	if (is_barebox_head(head))
+		ret = *psize;
+	debug("Detected barebox image size %u\n", ret);
+
+	return ret;
+}
+#else
+static void *read_image_head(const char *name)
+{
+	return NULL;
+}
+
+static unsigned int get_image_size(void *head)
+{
+	return 0;
+}
+#endif
+
+void* bootstrap_read_devfs(char *devname, bool use_bb, int offset,
+			   int default_size, int max_size)
+{
+	int ret;
+	int size = 0;
+	void *to, *header;
+	struct cdev *cdev;
+	char *partname = "x";
+
+	devfs_add_partition(devname, offset, max_size, DEVFS_PARTITION_FIXED, partname);
+	if (use_bb) {
+		dev_add_bb_dev(partname, "bbx");
+		partname = "bbx";
+	}
+
+	header = read_image_head(partname);
+	if (header) {
+		size = get_image_size(header);
+		if (!size)
+			bootstrap_err("%s: failed to get image size\n", devname);
+	}
+
+	if (!size) {
+		size = default_size;
+		bootstrap_err("%s: failed to detect barebox and it's image size so use %d\n",
+			 devname, size);
+	}
+
+	to = xmalloc(size);
+
+	cdev = cdev_open(partname, O_RDONLY);
+	if (!cdev) {
+		bootstrap_err("%s: failed to open %s\n", devname, partname);
+		return NULL;
+	}
+
+	ret = cdev_read(cdev, to, size, 0, 0);
+	if (ret != size) {
+		bootstrap_err("%s: failed to read from %s\n", devname, partname);
+		return NULL;
+	}
+
+	return to;
+}
diff --git a/lib/bootstrap/disk.c b/lib/bootstrap/disk.c
new file mode 100644
index 0000000..879d331
--- /dev/null
+++ b/lib/bootstrap/disk.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <sizes.h>
+#include <errno.h>
+#include <malloc.h>
+#include <bootstrap.h>
+
+void* bootstrap_read_disk(char *dev, char *fstype)
+{
+	int ret;
+	void *buf;
+	int len;
+	char *path = "/";
+
+	ret = mount(dev, fstype, path);
+	if (ret) {
+		bootstrap_err("mounting %s failed with %d\n", dev, ret);
+		return NULL;
+	}
+
+	buf = read_file("/barebox.bin", &len);
+	if (!buf) {
+		bootstrap_err("could not read barebox.bin from %s\n", dev);
+		umount(path);
+		return NULL;
+	}
+
+	return buf;
+}
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 09/10] at91: add bootstrap version

[Jean-Christophe PLAGNIOL-VILLARD]

This will allow to boot from NAND/MMC and others.
This version of bootstrap is a non shell version of barebox compressed by the
pbl.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/Kconfig                  |    5 ++
 arch/arm/mach-at91/Makefile                 |    1 +
 arch/arm/mach-at91/bootstrap.c              |   95 +++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/bootstrap.h |   28 ++++++++
 4 files changed, 129 insertions(+)
 create mode 100644 arch/arm/mach-at91/bootstrap.c
 create mode 100644 arch/arm/mach-at91/include/mach/bootstrap.h

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2e43b10..4323d7c 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -494,4 +494,9 @@ config CMD_AT91_BOOT_TEST
 
 endif
 
+config AT91_BOOTSTRAP
+	bool "at91 bootstrap"
+	depends on MACH_HAS_LOWLEVEL_INIT
+	select BOOTSTRAP
+
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 4404d23..634b160 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,6 +1,7 @@
 obj-y += setup.o clock.o gpio.o
 obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o
 
+obj-$(CONFIG_AT91_BOOTSTRAP) += bootstrap.o
 lowlevel_init-y = at91sam926x_lowlevel_init.o
 lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
 obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
diff --git a/arch/arm/mach-at91/bootstrap.c b/arch/arm/mach-at91/bootstrap.c
new file mode 100644
index 0000000..5ee43ad
--- /dev/null
+++ b/arch/arm/mach-at91/bootstrap.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <bootstrap.h>
+#include <mach/bootstrap.h>
+#include <sizes.h>
+#include <malloc.h>
+#include <init.h>
+
+#if defined(CONFIG_MCI_ATMEL)
+#define is_mmc() 1
+#else
+#define is_mmc() 0
+#endif
+
+#ifdef CONFIG_NAND_ATMEL
+#define is_nand() 1
+#else
+#define is_nand() 0
+#endif
+
+#ifdef CONFIG_MTD_M25P80
+#define is_m25p80() 1
+#else
+#define is_m25p80() 0
+#endif
+
+#ifdef CONFIG_MTD_DATAFLASH
+#define is_dataflash() 1
+#else
+#define is_dataflash() 0
+#endif
+
+static void boot_seq(bool is_barebox)
+{
+	char *name = is_barebox ? "barebox" : "unknown";
+	int (*func)(void) = NULL;
+
+	if (is_m25p80()) {
+		func = bootstrap_board_read_m25p80();
+		printf("Boot %s from m25p80\n", name);
+		bootstrap_boot(func, is_barebox);
+		bootstrap_err("... failed\n");
+		free(func);
+	}
+	if (is_dataflash()) {
+		printf("Boot %s from dataflash\n", name);
+		func = bootstrap_board_read_dataflash();
+		bootstrap_boot(func, is_barebox);
+		bootstrap_err("... failed\n");
+		free(func);
+	}
+	if (is_nand()) {
+		printf("Boot %s from nand\n", name);
+		func = bootstrap_read_devfs("nand0", true, SZ_128K, SZ_256K, SZ_1M);
+		bootstrap_boot(func, is_barebox);
+		bootstrap_err("... failed\n");
+		free(func);
+	}
+}
+
+static int at91_bootstrap(void)
+{
+	int (*func)(void) = NULL;
+
+	if (is_mmc()) {
+		printf("Boot from mmc\n");
+		func = bootstrap_read_disk("disk0.0", NULL);
+		bootstrap_boot(func, false);
+		bootstrap_err("... failed\n");
+		free(func);
+	}
+
+	/* First only bootstrap_boot a barebox */
+	boot_seq(true);
+	/* Second bootstrap_boot any */
+	boot_seq(false);
+
+	bootstrap_err("bootstrap_booting failed\n");
+	while (1);
+
+	return 0;
+}
+
+static int at91_set_bootstrap(void)
+{
+	barebox_main = at91_bootstrap;
+
+	return 0;
+}
+late_initcall(at91_set_bootstrap);
diff --git a/arch/arm/mach-at91/include/mach/bootstrap.h b/arch/arm/mach-at91/include/mach/bootstrap.h
new file mode 100644
index 0000000..a3d19dd
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/bootstrap.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#ifndef __MACH_BOOTSTRAP_H__
+#define __MACH_BOOTSTRAP_H__
+
+#ifdef CONFIG_MTD_M25P80
+void * bootstrap_board_read_m25p80(void);
+#else
+static inline void * bootstrap_board_read_m25p80(void)
+{
+	return NULL;
+}
+#endif
+
+#ifdef CONFIG_MTD_DATAFLASH
+void * bootstrap_board_read_dataflash(void);
+#else
+static inline void * bootstrap_board_read_dataflash(void)
+{
+	return NULL;
+}
+#endif
+
+#endif /* __MACH_BOOTSTRAP_H__ */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 10/10] at91: usb_a9263: add bootstrap version

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/usb-a926x/Makefile                 |    3 +++
 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c    |   16 ++++++++++++
 .../configs/usb_a9263_128mib_bootstrap_defconfig   |   27 ++++++++++++++++++++
 arch/arm/configs/usb_a9263_bootstrap_defconfig     |   26 +++++++++++++++++++
 4 files changed, 72 insertions(+)
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
 create mode 100644 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
 create mode 100644 arch/arm/configs/usb_a9263_bootstrap_defconfig

diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile
index 9511a76..e314dd5 100644
--- a/arch/arm/boards/usb-a926x/Makefile
+++ b/arch/arm/boards/usb-a926x/Makefile
@@ -1,5 +1,8 @@
 obj-y += init.o
 
+bootstrap-$(CONFIG_MACH_USB_A9263) = usb_a9263_bootstrap.o
+obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y)
+
 lowlevel_init-$(CONFIG_MACH_USB_A9263) = usb_a9263_lowlevel_init.o
 
 obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
diff --git a/arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c b/arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
new file mode 100644
index 0000000..368c677
--- /dev/null
+++ b/arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <bootstrap.h>
+#include <mach/bootstrap.h>
+
+#ifdef CONFIG_MTD_DATAFLASH
+void * bootstrap_board_read_dataflash(void)
+{
+	return bootstrap_read_devfs("dataflash0", false, 0xffc0, 204864, 204864);
+}
+#endif
diff --git a/arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig b/arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
new file mode 100644
index 0000000..0411bd8
--- /dev/null
+++ b/arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
@@ -0,0 +1,27 @@
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AT91_HAVE_SRAM_128M=y
+CONFIG_AT91_BOOTSTRAP=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x12000
+CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_PBL_IMAGE=y
+CONFIG_MMU=y
+CONFIG_MALLOC_DUMMY=y
+CONFIG_PROMPT="USB-9263:"
+CONFIG_SHELL_NONE=y
+# CONFIG_CONSOLE_FULL is not set
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+# CONFIG_MTD_WRITE is not set
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+CONFIG_NAND_ATMEL=y
+# CONFIG_FS_RAMFS is not set
+CONFIG_BOOTSTRAP_DEVFS=y
diff --git a/arch/arm/configs/usb_a9263_bootstrap_defconfig b/arch/arm/configs/usb_a9263_bootstrap_defconfig
new file mode 100644
index 0000000..78c1c8f
--- /dev/null
+++ b/arch/arm/configs/usb_a9263_bootstrap_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AT91_BOOTSTRAP=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x12000
+CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_PBL_IMAGE=y
+CONFIG_MMU=y
+CONFIG_MALLOC_DUMMY=y
+CONFIG_PROMPT="USB-9263:"
+CONFIG_SHELL_NONE=y
+# CONFIG_CONSOLE_FULL is not set
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+# CONFIG_MTD_WRITE is not set
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+CONFIG_NAND_ATMEL=y
+# CONFIG_FS_RAMFS is not set
+CONFIG_BOOTSTRAP_DEVFS=y
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 00/10 v7] at91: add bootstrap support

[Sascha Hauer]

On Tue, Jan 22, 2013 at 03:38:33PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
> 
> 	v7:
> 
> 	 Makefile bug fix + typo
> 
> 	v6:
> 	 allow to pass the fstype for mount (omap usbfs)
> 
> 	v5:
> 	 rebase on Sacha SHELL_NONE patch
> 
> 	v4:
> 	 make the code arm & mips supported for barebox head detection
> 
> 	v3:
> 
> 	send correct patch series and pull
> 
> 	can we have it on master the v2 does not cange much since v1
> 
> 	v2:
> 	 fix whitesapce
> 	 fix comment
> 	 fix command default
> 
> 	This patch serie introduce a common bootstrap code
> 	aka xloder for TI and at91bootstrap for Atmel
> 	to barebox
> 
> 	As I do not have with me right now a TI platform I did not switch
> 	it to the new generic bootstrap code.
> 
> 	On at91 add it on the calao usb-a9263 test on nand and spi
> 	This patch serie depends on the previous Sacha patch for SHELL_NONE
> 
> The following changes since commit a0a9331ba745418f1e7871f5bd707e3cc7e89902:
> 
>   startup: call a barebox_main function pointer at the end of the startup (2013-01-17 11:56:24 +0800)
> 
> are available in the git repository at:
> 
>   git://git.jcrosoft.org/barebox.git delivery/at91_bootstrap

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 00/10 v6] at91: add bootstrap support

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

	v6:
	 allow to pass the fstype for mount (omap usbfs)

	v5:
	 rebase on Sacha SHELL_NONE patch

	v4:
	 make the code arm & mips supported for barebox head detection

	v3:

	send correct patch series and pull

	can we have it on master the v2 does not cange much since v1

	v2:
	 fix whitesapce
	 fix comment
	 fix command default

	This patch serie introduce a common bootstrap code
	aka xloder for TI and at91bootstrap for Atmel
	to barebox

	As I do not have with me right now a TI platform I did not switch
	it to the new generic bootstrap code.

	On at91 add it on the calao usb-a9263 test on nand and spi
	This patch serie depends on the previous Sacha patch for SHELL_NONE

The following changes since commit a0a9331ba745418f1e7871f5bd707e3cc7e89902:

  startup: call a barebox_main function pointer at the end of the startup (2013-01-17 11:56:24 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91_bootstrap

for you to fetch changes up to a9d1d9ab20117db4ec7b47cb85e4b5ed0dd07c8d:

  at91: usb_a9263: add bootstrap version (2013-01-17 17:05:29 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (10):
      filetype: add is_barebox_mips_head support
      filetype: add is_barebox_head
      at91: dump mux command: make it depends on COMMAND_SUPPORT
      at91: add test commamd to emulate bootrom boot
      at91sam926x: lowlevel add external boot support
      at91: sam926x: switch lowlevel param to c code
      at91: usb-a9263 add lowlevel init
      introduce common bootstrap code
      at91: add bootstrap version
      at91: usb_a9263: add bootstrap version

 arch/arm/boards/at91sam9263ek/Makefile                |    5 +++++
 arch/arm/boards/at91sam9263ek/config.h                |   87 --------------------------------------------------------------------------------------
 arch/arm/boards/at91sam9263ek/lowlevel_init.c         |  104 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/mmccpu/Makefile                       |    5 +++++
 arch/arm/boards/mmccpu/config.h                       |  118 --------------------------------------------------------------------------------------------------------------------
 arch/arm/boards/mmccpu/lowlevel_init.c                |  135 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/pm9261/Makefile                       |    5 +++++
 arch/arm/boards/pm9261/config.h                       |   87 --------------------------------------------------------------------------------------
 arch/arm/boards/pm9261/lowlevel_init.c                |  102 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/pm9263/Makefile                       |    5 +++++
 arch/arm/boards/pm9263/config.h                       |  103 -----------------------------------------------------------------------------------------------------
 arch/arm/boards/pm9263/lowlevel_init.c                |  121 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/usb-a926x/Makefile                    |    9 +++++++++
 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c       |   16 ++++++++++++++++
 arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c   |  111 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig |   27 +++++++++++++++++++++++++++
 arch/arm/configs/usb_a9263_bootstrap_defconfig        |   26 ++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig                            |   16 ++++++++++++++++
 arch/arm/mach-at91/Makefile                           |    2 ++
 arch/arm/mach-at91/at91sam926x_lowlevel_init.c        |   84 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
 arch/arm/mach-at91/boot_test_cmd.c                    |   95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/bootstrap.c                        |   95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h  |   33 +++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/bootstrap.h           |   28 ++++++++++++++++++++++++++++
 common/filetype.c                                     |    2 +-
 include/bootstrap.h                                   |   34 ++++++++++++++++++++++++++++++++++
 include/filetype.h                                    |   21 +++++++++++++++++++++
 lib/Kconfig                                           |    2 ++
 lib/Makefile                                          |    1 +
 lib/bootstrap/Kconfig                                 |   13 +++++++++++++
 lib/bootstrap/Makefile                                |    3 +++
 lib/bootstrap/common.c                                |   24 ++++++++++++++++++++++++
 lib/bootstrap/devfs.c                                 |  118 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/bootstrap/disk.c                                  |   37 +++++++++++++++++++++++++++++++++++++
 34 files changed, 1253 insertions(+), 421 deletions(-)
 create mode 100644 arch/arm/boards/at91sam9263ek/lowlevel_init.c
 create mode 100644 arch/arm/boards/mmccpu/lowlevel_init.c
 create mode 100644 arch/arm/boards/pm9261/lowlevel_init.c
 create mode 100644 arch/arm/boards/pm9263/lowlevel_init.c
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c
 create mode 100644 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
 create mode 100644 arch/arm/configs/usb_a9263_bootstrap_defconfig
 create mode 100644 arch/arm/mach-at91/boot_test_cmd.c
 create mode 100644 arch/arm/mach-at91/bootstrap.c
 create mode 100644 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
 create mode 100644 arch/arm/mach-at91/include/mach/bootstrap.h
 create mode 100644 include/bootstrap.h
 create mode 100644 lib/bootstrap/Kconfig
 create mode 100644 lib/bootstrap/Makefile
 create mode 100644 lib/bootstrap/common.c
 create mode 100644 lib/bootstrap/devfs.c
 create mode 100644 lib/bootstrap/disk.c

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 01/10] filetype: add is_barebox_mips_head support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 common/filetype.c  |    2 +-
 include/filetype.h |   16 ++++++++++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/common/filetype.c b/common/filetype.c
index 748e364..bafdc31 100644
--- a/common/filetype.c
+++ b/common/filetype.c
@@ -145,7 +145,7 @@ enum filetype file_detect_type(void *_buf, size_t bufsize)
 		return filetype_aimage;
 	if (buf64[0] == le64_to_cpu(0x0a1a0a0d474e5089ull))
 		return filetype_png;
-	if (strncmp(buf8 + 0x10, "barebox", 7) == 0)
+	if (is_barebox_mips_head(_buf))
 		return filetype_mips_barebox;
 
 	if (bufsize < 64)
diff --git a/include/filetype.h b/include/filetype.h
index 91139db..c2af917 100644
--- a/include/filetype.h
+++ b/include/filetype.h
@@ -50,4 +50,20 @@ static inline int is_barebox_arm_head(const char *head)
 }
 #endif
 
+#define MIPS_HEAD_SIZE			0x20
+#define MIPS_HEAD_MAGICWORD_OFFSET	0x10
+#define MIPS_HEAD_SIZE_OFFSET		0x1C
+
+#ifdef CONFIG_MIPS
+static inline int is_barebox_mips_head(const char *head)
+{
+	return !strcmp(head + MIPS_HEAD_MAGICWORD_OFFSET, "barebox");
+}
+#else
+static inline int is_barebox_mips_head(const char *head)
+{
+	return 0;
+}
+#endif
+
 #endif /* __FILE_TYPE_H */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 04/10] at91: add test commamd to emulate bootrom boot

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/Kconfig         |    6 +++
 arch/arm/mach-at91/Makefile        |    1 +
 arch/arm/mach-at91/boot_test_cmd.c |   95 ++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 arch/arm/mach-at91/boot_test_cmd.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fd9122..2815d5f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -485,6 +485,12 @@ config CMD_AT91MUX
 	bool "at91mux dump command"
 	default y
 
+config CMD_AT91_BOOT_TEST
+	bool "at91_boot_test"
+	help
+	  allow to upload a boot binary to sram and execute it
+	  usefull to test bootstrap or barebox lowlevel init
+
 endif
 
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 53b4dd8..4404d23 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,4 +1,5 @@
 obj-y += setup.o clock.o gpio.o
+obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o
 
 lowlevel_init-y = at91sam926x_lowlevel_init.o
 lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
diff --git a/arch/arm/mach-at91/boot_test_cmd.c b/arch/arm/mach-at91/boot_test_cmd.c
new file mode 100644
index 0000000..aa5c020
--- /dev/null
+++ b/arch/arm/mach-at91/boot_test_cmd.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#include <common.h>
+#include <command.h>
+#include <libbb.h>
+#include <getopt.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <malloc.h>
+#include <errno.h>
+
+static int do_at91_boot_test(int argc, char *argv[])
+{
+	int opt;
+	u32 *buf32;
+	void *buf;
+	void (*jump)(void) = NULL;
+	int fd;
+	int ret = 1;
+	char *sram = "/dev/sram0";
+	u32 read_size, write_size;
+	u32 tmp = 0;
+
+	while ((opt = getopt(argc, argv, "j:s:")) > 0) {
+		switch (opt) {
+		case 'j':
+			jump = (void*)simple_strtoul(optarg, NULL, 0);
+			break;
+		case 's':
+			sram = optarg;
+			break;
+		default:
+			return COMMAND_ERROR_USAGE;
+		}
+	}
+
+	if (argc < optind + 1)
+		return COMMAND_ERROR_USAGE;
+
+	buf32 = buf = read_file(argv[optind], &read_size);
+	if (!buf)
+		return -EINVAL;
+
+	write_size = buf32[5];
+
+	printf("size of the size %d\n", read_size);
+	printf("size to load in sram %d\n", write_size);
+
+	if (write_size > read_size) {
+		printf("file smaller than requested sram loading size (%d < %d)\n", write_size, read_size);
+		goto err;
+	}
+
+	fd = open(sram, O_WRONLY);
+	if (fd < 0) {
+		printf("could not open %s: %s\n", sram, errno_str());
+		ret = fd;
+		goto err;
+	}
+
+	while (write_size) {
+		tmp = write(fd, buf, write_size);
+		if (tmp < 0) {
+			perror("write");
+			goto err_open;
+		}
+		buf += tmp;
+		write_size -= tmp;
+	}
+
+	shutdown_barebox();
+
+	jump();
+
+err_open:
+	close(fd);
+err:
+	free(buf);
+	return ret;
+}
+
+BAREBOX_CMD_HELP_START(at91_boot_test)
+BAREBOX_CMD_HELP_USAGE("at91_boot_test [-j <jump addr>] [-s <sram>] file\n")
+BAREBOX_CMD_HELP_SHORT("upload the binary to sram and jump as will do the romcode\n")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(at91_boot_test)
+	.cmd		= do_at91_boot_test,
+	.usage		= "upload the binary to sram and jump as will do the romcode",
+	BAREBOX_CMD_HELP(cmd_at91_boot_test_help)
+BAREBOX_CMD_END
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 04/10] at91: add test commamd to emulate bootrom boot

[Sascha Hauer]

On Mon, Jan 21, 2013 at 03:33:18PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/mach-at91/Kconfig         |    6 +++
>  arch/arm/mach-at91/Makefile        |    1 +
>  arch/arm/mach-at91/boot_test_cmd.c |   95 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 102 insertions(+)
>  create mode 100644 arch/arm/mach-at91/boot_test_cmd.c
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 0fd9122..2815d5f 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -485,6 +485,12 @@ config CMD_AT91MUX
>  	bool "at91mux dump command"
>  	default y
>  
> +config CMD_AT91_BOOT_TEST
> +	bool "at91_boot_test"
> +	help
> +	  allow to upload a boot binary to sram and execute it
> +	  usefull to test bootstrap or barebox lowlevel init

useful!!

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 00/10 v5] at91: add bootstrap support

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

	v5:
	 rebase on Sacha SHELL_NONE patch

	v4:
	 make the code arm & mips supported for barebox head detection

	v3:

	send correct patch series and pull

	can we have it on master the v2 does not cange much since v1

	v2:
	 fix whitesapce
	 fix comment
	 fix command default

	This patch serie introduce a common bootstrap code
	aka xloder for TI and at91bootstrap for Atmel
	to barebox

	As I do not have with me right now a TI platform I did not switch
	it to the new generic bootstrap code.

	On at91 add it on the calao usb-a9263 test on nand and spi
	This patch serie depends on the previous Sacha patch for SHELL_NONE

The following changes since commit a0a9331ba745418f1e7871f5bd707e3cc7e89902:

  startup: call a barebox_main function pointer at the end of the startup (2013-01-17 11:56:24 +0800)

are available in the git repository at:

  git://git.jcrosoft.org/barebox.git delivery/at91_bootstrap

for you to fetch changes up to 1e59aa94dad142e105baa4059c271353322d98fc:

  at91: usb_a9263: add bootstrap version (2013-01-17 12:53:23 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (10):
      filetype: add is_barebox_mips_head support
      filetype: add is_barebox_head
      at91: dump mux command: make it depends on COMMAND_SUPPORT
      at91: add test commamd to emulate bootrom boot
      at91sam926x: lowlevel add external boot support
      at91: sam926x: switch lowlevel param to c code
      at91: usb-a9263 add lowlevel init
      introduce common bootstrap code
      at91: add bootstrap version
      at91: usb_a9263: add bootstrap version

 arch/arm/boards/at91sam9263ek/Makefile                |    5 ++++
 arch/arm/boards/at91sam9263ek/config.h                |   87 ---------------------------------------------------------------------
 arch/arm/boards/at91sam9263ek/lowlevel_init.c         |  104 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/mmccpu/Makefile                       |    5 ++++
 arch/arm/boards/mmccpu/config.h                       |  118 ----------------------------------------------------------------------------------------------
 arch/arm/boards/mmccpu/lowlevel_init.c                |  135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/pm9261/Makefile                       |    5 ++++
 arch/arm/boards/pm9261/config.h                       |   87 ---------------------------------------------------------------------
 arch/arm/boards/pm9261/lowlevel_init.c                |  102 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/pm9263/Makefile                       |    5 ++++
 arch/arm/boards/pm9263/config.h                       |  103 ----------------------------------------------------------------------------------
 arch/arm/boards/pm9263/lowlevel_init.c                |  121 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boards/usb-a926x/Makefile                    |    9 ++++++++
 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c       |   16 +++++++++++++
 arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c   |  111 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig |   27 ++++++++++++++++++++++
 arch/arm/configs/usb_a9263_bootstrap_defconfig        |   26 +++++++++++++++++++++
 arch/arm/mach-at91/Kconfig                            |   16 +++++++++++++
 arch/arm/mach-at91/Makefile                           |    2 ++
 arch/arm/mach-at91/at91sam926x_lowlevel_init.c        |   84 +++++++++++++++++++++++++++++++++++++++++++++++--------------------
 arch/arm/mach-at91/boot_test_cmd.c                    |   95 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/bootstrap.c                        |   95 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h  |   33 +++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/bootstrap.h           |   28 +++++++++++++++++++++++
 common/filetype.c                                     |    2 +-
 include/bootstrap.h                                   |   34 +++++++++++++++++++++++++++
 include/filetype.h                                    |   21 +++++++++++++++++
 lib/Kconfig                                           |    2 ++
 lib/Makefile                                          |    1 +
 lib/bootstrap/Kconfig                                 |   13 +++++++++++
 lib/bootstrap/Makefile                                |    3 +++
 lib/bootstrap/common.c                                |   21 +++++++++++++++++
 lib/bootstrap/devfs.c                                 |  118 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/bootstrap/disk.c                                  |   37 ++++++++++++++++++++++++++++++
 34 files changed, 1250 insertions(+), 421 deletions(-)
 create mode 100644 arch/arm/boards/at91sam9263ek/lowlevel_init.c
 create mode 100644 arch/arm/boards/mmccpu/lowlevel_init.c
 create mode 100644 arch/arm/boards/pm9261/lowlevel_init.c
 create mode 100644 arch/arm/boards/pm9263/lowlevel_init.c
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
 create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_lowlevel_init.c
 create mode 100644 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
 create mode 100644 arch/arm/configs/usb_a9263_bootstrap_defconfig
 create mode 100644 arch/arm/mach-at91/boot_test_cmd.c
 create mode 100644 arch/arm/mach-at91/bootstrap.c
 create mode 100644 arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
 create mode 100644 arch/arm/mach-at91/include/mach/bootstrap.h
 create mode 100644 include/bootstrap.h
 create mode 100644 lib/bootstrap/Kconfig
 create mode 100644 lib/bootstrap/Makefile
 create mode 100644 lib/bootstrap/common.c
 create mode 100644 lib/bootstrap/devfs.c
 create mode 100644 lib/bootstrap/disk.c

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 01/10] filetype: add is_barebox_mips_head support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 common/filetype.c  |    2 +-
 include/filetype.h |   16 ++++++++++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/common/filetype.c b/common/filetype.c
index 748e364..bafdc31 100644
--- a/common/filetype.c
+++ b/common/filetype.c
@@ -145,7 +145,7 @@ enum filetype file_detect_type(void *_buf, size_t bufsize)
 		return filetype_aimage;
 	if (buf64[0] == le64_to_cpu(0x0a1a0a0d474e5089ull))
 		return filetype_png;
-	if (strncmp(buf8 + 0x10, "barebox", 7) == 0)
+	if (is_barebox_mips_head(_buf))
 		return filetype_mips_barebox;
 
 	if (bufsize < 64)
diff --git a/include/filetype.h b/include/filetype.h
index 91139db..c2af917 100644
--- a/include/filetype.h
+++ b/include/filetype.h
@@ -50,4 +50,20 @@ static inline int is_barebox_arm_head(const char *head)
 }
 #endif
 
+#define MIPS_HEAD_SIZE			0x20
+#define MIPS_HEAD_MAGICWORD_OFFSET	0x10
+#define MIPS_HEAD_SIZE_OFFSET		0x1C
+
+#ifdef CONFIG_MIPS
+static inline int is_barebox_mips_head(const char *head)
+{
+	return !strcmp(head + MIPS_HEAD_MAGICWORD_OFFSET, "barebox");
+}
+#else
+static inline int is_barebox_mips_head(const char *head)
+{
+	return 0;
+}
+#endif
+
 #endif /* __FILE_TYPE_H */
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 04/10] at91: add test commamd to emulate bootrom boot

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/Kconfig         |    6 +++
 arch/arm/mach-at91/Makefile        |    1 +
 arch/arm/mach-at91/boot_test_cmd.c |   95 ++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 arch/arm/mach-at91/boot_test_cmd.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0fd9122..2815d5f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -485,6 +485,12 @@ config CMD_AT91MUX
 	bool "at91mux dump command"
 	default y
 
+config CMD_AT91_BOOT_TEST
+	bool "at91_boot_test"
+	help
+	  allow to upload a boot binary to sram and execute it
+	  usefull to test bootstrap or barebox lowlevel init
+
 endif
 
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 53b4dd8..4404d23 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,4 +1,5 @@
 obj-y += setup.o clock.o gpio.o
+obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o
 
 lowlevel_init-y = at91sam926x_lowlevel_init.o
 lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
diff --git a/arch/arm/mach-at91/boot_test_cmd.c b/arch/arm/mach-at91/boot_test_cmd.c
new file mode 100644
index 0000000..90093d8
--- /dev/null
+++ b/arch/arm/mach-at91/boot_test_cmd.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#include <common.h>
+#include <command.h>
+#include <libbb.h>
+#include <getopt.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <malloc.h>
+#include <errno.h>
+
+static int do_at91_boot_test(int argc, char *argv[])
+{
+	int opt;
+	u32 *buf32;
+	void *buf;
+	void (*jump)(void) = NULL;
+	int fd;
+	int ret = 1;
+	char *sram = "/dev/sram0";
+	u32 read_size, write_size;
+	u32 tmp = 0;
+
+	while ((opt = getopt(argc, argv, "j:s:")) > 0) {
+		switch (opt) {
+		case 'j':
+			jump = (void*)simple_strtoul(optarg, NULL, 0);
+			break;
+		case 's':
+			sram = optarg;
+			break;
+		default:
+			return COMMAND_ERROR_USAGE;
+		}
+	}
+
+	if (argc < optind + 1)
+		return COMMAND_ERROR_USAGE;
+
+	buf32 = buf = read_file(argv[optind], &read_size);
+	if (!buf)
+		return -EINVAL;
+
+	write_size = buf32[5];
+
+	printf("size of the size %d\n", read_size);
+	printf("size to load in sram %d\n", write_size);
+
+	if (write_size > read_size) {
+		printf("file smaller than requested sram loading size (%d < %d)\n", write_size, read_size);
+		goto err;
+	}
+
+	fd = open(sram, O_WRONLY);
+	if (fd < 0) {
+		printf("could not open %s: %s\n", sram, errno_str());
+		ret = fd;
+		goto err;
+	}
+
+	while(write_size) {
+		tmp = write(fd, buf, write_size);
+		if (tmp < 0) {
+			perror("write");
+			goto err_open;
+		}
+		buf += tmp;
+		write_size -= tmp;
+	}
+
+	shutdown_barebox();
+
+	jump();
+
+err_open:
+	close(fd);
+err:
+	free(buf);
+	return ret;
+}
+
+BAREBOX_CMD_HELP_START(at91_boot_test)
+BAREBOX_CMD_HELP_USAGE("at91_boot_test [-j <jump addr>] [-s <sram>] file\n")
+BAREBOX_CMD_HELP_SHORT("upload the binary to sram and jump as will do the romcode\n")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(at91_boot_test)
+	.cmd		= do_at91_boot_test,
+	.usage		= "upload the binary to sram and jump as will do the romcode",
+	BAREBOX_CMD_HELP(cmd_at91_boot_test_help)
+BAREBOX_CMD_END
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 04/10] at91: add test commamd to emulate bootrom boot

[Alexander Aring]

[-- Attachment #1.1: Type: text/plain, Size: 4509 bytes --]

hi


2013/1/21 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/mach-at91/Kconfig         |    6 +++
>  arch/arm/mach-at91/Makefile        |    1 +
>  arch/arm/mach-at91/boot_test_cmd.c |   95
> ++++++++++++++++++++++++++++++++++++
>  3 files changed, 102 insertions(+)
>  create mode 100644 arch/arm/mach-at91/boot_test_cmd.c
>
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 0fd9122..2815d5f 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -485,6 +485,12 @@ config CMD_AT91MUX
>         bool "at91mux dump command"
>         default y
>
> +config CMD_AT91_BOOT_TEST
> +       bool "at91_boot_test"
> +       help
> +         allow to upload a boot binary to sram and execute it
> +         usefull to test bootstrap or barebox lowlevel init
> +
>  endif
>
>  endif
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 53b4dd8..4404d23 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -1,4 +1,5 @@
>  obj-y += setup.o clock.o gpio.o
> +obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o
>
>  lowlevel_init-y = at91sam926x_lowlevel_init.o
>  lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
> diff --git a/arch/arm/mach-at91/boot_test_cmd.c
> b/arch/arm/mach-at91/boot_test_cmd.c
> new file mode 100644
> index 0000000..90093d8
> --- /dev/null
> +++ b/arch/arm/mach-at91/boot_test_cmd.c
> @@ -0,0 +1,95 @@
> +/*
> + * Copyright (c) 2012 Jean-Christophe PLAGNIOL-VILLARD <
> plagnioj@jcrosoft.com>
> + *
> + * Under GPLv2 only
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <libbb.h>
> +#include <getopt.h>
> +#include <fs.h>
> +#include <fcntl.h>
> +#include <malloc.h>
> +#include <errno.h>
> +
> +static int do_at91_boot_test(int argc, char *argv[])
> +{
> +       int opt;
> +       u32 *buf32;
> +       void *buf;
> +       void (*jump)(void) = NULL;
> +       int fd;
> +       int ret = 1;
> +       char *sram = "/dev/sram0";
> +       u32 read_size, write_size;
> +       u32 tmp = 0;
> +
> +       while ((opt = getopt(argc, argv, "j:s:")) > 0) {
> +               switch (opt) {
> +               case 'j':
> +                       jump = (void*)simple_strtoul(optarg, NULL, 0);
> +                       break;
> +               case 's':
> +                       sram = optarg;
> +                       break;
> +               default:
> +                       return COMMAND_ERROR_USAGE;
> +               }
> +       }
> +
> +       if (argc < optind + 1)
> +               return COMMAND_ERROR_USAGE;
> +
> +       buf32 = buf = read_file(argv[optind], &read_size);
> +       if (!buf)
> +               return -EINVAL;
> +
> +       write_size = buf32[5];
> +
> +       printf("size of the size %d\n", read_size);
> +       printf("size to load in sram %d\n", write_size);
> +
> +       if (write_size > read_size) {
> +               printf("file smaller than requested sram loading size (%d
> < %d)\n", write_size, read_size);
> +               goto err;
> +       }
> +
> +       fd = open(sram, O_WRONLY);
> +       if (fd < 0) {
> +               printf("could not open %s: %s\n", sram, errno_str());
> +               ret = fd;
> +               goto err;
> +       }
> +
> +       while(write_size) {
>
while (foo)


> +               tmp = write(fd, buf, write_size);
> +               if (tmp < 0) {
> +                       perror("write");
> +                       goto err_open;
> +               }
> +               buf += tmp;
> +               write_size -= tmp;
> +       }
> +
> +       shutdown_barebox();
> +
> +       jump();
> +
> +err_open:
> +       close(fd);
> +err:
> +       free(buf);
> +       return ret;
> +}
> +
> +BAREBOX_CMD_HELP_START(at91_boot_test)
> +BAREBOX_CMD_HELP_USAGE("at91_boot_test [-j <jump addr>] [-s <sram>]
> file\n")
> +BAREBOX_CMD_HELP_SHORT("upload the binary to sram and jump as will do the
> romcode\n")
> +BAREBOX_CMD_HELP_END
> +
> +BAREBOX_CMD_START(at91_boot_test)
> +       .cmd            = do_at91_boot_test,
> +       .usage          = "upload the binary to sram and jump as will do
> the romcode",
> +       BAREBOX_CMD_HELP(cmd_at91_boot_test_help)
> +BAREBOX_CMD_END
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>

[-- Attachment #1.2: Type: text/html, Size: 6220 bytes --]

[-- Attachment #2: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox