mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/2] tny_a9263: add bootstrap support
Date: Wed, 23 Jan 2013 21:52:12 +0100	[thread overview]
Message-ID: <1358974332-10189-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1358974332-10189-1-git-send-email-plagnioj@jcrosoft.com>

the lowlevel init is the same as the usb-a9263 except that can not have the
128MiB option

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/tny-a926x/Makefile                 |    9 ++
 arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c    |   16 +++
 .../arm/boards/tny-a926x/tny_a9263_lowlevel_init.c |  107 ++++++++++++++++++++
 arch/arm/configs/tny_a9263_bootstrap_defconfig     |   26 +++++
 arch/arm/mach-at91/Kconfig                         |    1 +
 5 files changed, 159 insertions(+)
 create mode 100644 arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c
 create mode 100644 arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c
 create mode 100644 arch/arm/configs/tny_a9263_bootstrap_defconfig

diff --git a/arch/arm/boards/tny-a926x/Makefile b/arch/arm/boards/tny-a926x/Makefile
index eb072c0..36ea09f 100644
--- a/arch/arm/boards/tny-a926x/Makefile
+++ b/arch/arm/boards/tny-a926x/Makefile
@@ -1 +1,10 @@
 obj-y += init.o
+
+bootstrap-$(CONFIG_MACH_TNY_A9263) = tny_a9263_bootstrap.o
+obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y)
+
+lowlevel_init-$(CONFIG_MACH_TNY_A9263) = tny_a9263_lowlevel_init.o
+
+obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
+
+pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
diff --git a/arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c b/arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c
new file mode 100644
index 0000000..368c677
--- /dev/null
+++ b/arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <bootstrap.h>
+#include <mach/bootstrap.h>
+
+#ifdef CONFIG_MTD_DATAFLASH
+void * bootstrap_board_read_dataflash(void)
+{
+	return bootstrap_read_devfs("dataflash0", false, 0xffc0, 204864, 204864);
+}
+#endif
diff --git a/arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c b/arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c
new file mode 100644
index 0000000..1b146da
--- /dev/null
+++ b/arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_CLOCK		180
+
+#if MASTER_CLOCK == 200
+#define MASTER_PLL_MUL		100
+#else
+#define MASTER_PLL_MUL		90
+#endif
+#define MASTER_PLL_DIV		6
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+	/* Disable Watchdog */
+	cfg->wdt_mr =
+		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+		AT91_WDT_WDV |
+		AT91_WDT_WDDIS |
+		AT91_WDT_WDD;
+
+	/* define PDC[31:16] as DATA[31:16] */
+	cfg->ebi_pio_pdr = 0xFFFF0000;
+	/* no pull-up for D[31:16] */
+	cfg->ebi_pio_ppudr = 0xFFFF0000;
+	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+	cfg->ebi_csa =
+		AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |
+		AT91_MATRIX_EBI0_CS1A_SDRAMC;
+
+	cfg->smc_cs = 3;
+	cfg->smc_mode =
+		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_DBW_8 |
+		AT91_SMC_EXNWMODE_DISABLE |
+		AT91_SMC_TDF_(2);
+	cfg->smc_cycle =
+		AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5);
+	cfg->smc_pulse =
+		AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3);
+	cfg->smc_setup =
+		AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0);
+
+	cfg->pmc_mor = AT91_PMC_OSCBYPASS;
+	cfg->pmc_pllar =
+		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+		AT91_PMC_PLLCOUNT |	/* PLL Counter */
+		(0 << 28) |		/* PLL Clock Frequency Range */
+		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr1 =
+		AT91_PMC_CSS_SLOW |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+	/* PCK/2 = MCK Master Clock from PLLA */
+	cfg->pmc_mckr2 =
+		AT91_PMC_CSS_PLLA |
+		AT91_PMC_PRES_1 |
+		AT91SAM9_PMC_MDIV_2 |
+		AT91_PMC_PDIV_1;
+
+	/* SDRAM */
+	/* SDRAMC_TR - Refresh Timer register */
+	cfg->sdrc_tr1 = 0x13C;
+	/* SDRAMC_CR - Configuration register*/
+	cfg->sdrc_cr =
+		AT91_SDRAMC_NR_13 |
+		AT91_SDRAMC_NC_9 |
+		AT91_SDRAMC_NB_4 |
+		AT91_SDRAMC_CAS_2 |
+		AT91_SDRAMC_DBW_32 |
+		(2 <<  8) |		/* Write Recovery Delay */
+		(7 << 12) |		/* Row Cycle Delay */
+		(2 << 16) |		/* Row Precharge Delay */
+		(2 << 20) |		/* Row to Column Delay */
+		(5 << 24) |		/* Active to Precharge Delay */
+		(8 << 28);		/* Exit Self Refresh to Active Delay */
+
+	/* Memory Device Register -> SDRAM */
+	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+	/* SDRAM_TR */
+	cfg->sdrc_tr2 = (MASTER_CLOCK * 7);
+
+	/* user reset enable */
+	cfg->rstc_rmr =
+		AT91_RSTC_KEY |
+		AT91_RSTC_PROCRST |
+		AT91_RSTC_RSTTYP_WAKEUP |
+		AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/configs/tny_a9263_bootstrap_defconfig b/arch/arm/configs/tny_a9263_bootstrap_defconfig
new file mode 100644
index 0000000..d968b6f
--- /dev/null
+++ b/arch/arm/configs/tny_a9263_bootstrap_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_TNY_A9263=y
+CONFIG_AT91_BOOTSTRAP=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x12000
+CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_PBL_IMAGE=y
+CONFIG_MMU=y
+CONFIG_MALLOC_DUMMY=y
+CONFIG_PROMPT="USB-9263:"
+CONFIG_SHELL_NONE=y
+CONFIG_CONSOLE_SIMPLE=y
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+# CONFIG_MTD_WRITE is not set
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+CONFIG_NAND_ATMEL=y
+# CONFIG_FS_RAMFS is not set
+CONFIG_BOOTSTRAP_DEVFS=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4323d7c..dfa062d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -351,6 +351,7 @@ config MACH_PM9263
 config MACH_TNY_A9263
 	bool "CALAO TNY-A9263"
 	select SUPPORT_CALAO_MOB_TNY_MD2
+	select MACH_HAS_LOWLEVEL_INIT
 	help
 	  Select this if you are using a Calao Systems TNY-A9263.
 	  <http://www.calao-systems.com>
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-01-23 20:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-23 20:49 [PATCH 0/2] tny-a9263: add spi + " Jean-Christophe PLAGNIOL-VILLARD
2013-01-23 20:52 ` [PATCH 1/2] tny-a9263: add dataflash support Jean-Christophe PLAGNIOL-VILLARD
2013-01-23 20:52   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-25 17:36 ` [PATCH 0/2] tny-a9263: add spi + bootstrap support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358974332-10189-2-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox