From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 13/14] atmel_mci: drop board host caps
Date: Fri, 25 Jan 2013 16:17:46 +0100 [thread overview]
Message-ID: <1359127067-30079-13-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1359127067-30079-1-git-send-email-plagnioj@jcrosoft.com>
as it's handle by detecting the IP version and bus with
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/boards/at91sam9m10g45ek/init.c | 1 -
arch/arm/boards/dss11/init.c | 1 -
arch/arm/mach-at91/include/mach/board.h | 1 -
drivers/mci/atmel_mci.c | 1 -
4 files changed, 4 deletions(-)
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index d77b2bf..053c85b 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -113,7 +113,6 @@ static struct at91_ether_platform_data macb_pdata = {
#if defined(CONFIG_MCI_ATMEL)
static struct atmel_mci_platform_data ek_mci_data = {
.bus_width = 4,
- .host_caps = MMC_MODE_HS,
.detect_pin = AT91_PIN_PD10,
};
diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
index a2e9825..2920d5e 100644
--- a/arch/arm/boards/dss11/init.c
+++ b/arch/arm/boards/dss11/init.c
@@ -113,7 +113,6 @@ static void dss11_phy_reset(void)
static struct atmel_mci_platform_data dss11_mci_data = {
.slot_b = 1,
.bus_width = 4,
- .host_caps = MMC_MODE_HS,
};
static struct at91_usbh_data dss11_usbh_data = {
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index b18f1c0..9a72474 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -147,7 +147,6 @@ static inline struct device_d * at91_register_uart(unsigned id, unsigned pins)
struct atmel_mci_platform_data {
unsigned slot_b;
unsigned bus_width;
- unsigned host_caps; /* MCI_MODE_* from mci.h */
int detect_pin;
int wp_pin;
};
diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 8ad0e8a..647683b 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -540,7 +540,6 @@ static int atmci_probe(struct device_d *hw_dev)
host->mci.init = atmci_reset;
host->mci.hw_dev = hw_dev;
- host->mci.host_caps = pd->host_caps;
if (pd->bus_width >= 4)
host->mci.host_caps |= MMC_MODE_4BIT;
if (pd->bus_width == 8)
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-01-25 15:19 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-25 15:14 [for master PATCH 00/14] atmel_mci: fixes and cleanup Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 01/14] atmel_mci: rename atmel_mci_host tp atmel_mci Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 02/14] atmel_mci: rename atmel_mci_readl/writel to atmci_readl/writel Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 03/14] atmel_mci: rename all function to start with atmci Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 04/14] atmel_mci: use linux regs define Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 05/14] atmel_mci: detect IP version Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 06/14] atmel_mci: version 0x5xx of the IP have a different clk div Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 07/14] atmel_mci: fix host init Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200 Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 17:31 ` Sascha Hauer
2013-01-25 17:35 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 09/14] atmel_mci: on version 0x0 we need to reset the IP at each request Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 10/14] atmel_mci: after a software timeout the IP need to be reset Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 11/14] atmel_mci: support the SD highspeed since IP version 0x300 Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 12/14] atmel_mci: update the SD/SDIO Card Register at request time Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-25 15:17 ` [PATCH 14/14] atmel_mci: gpio: request and configure card detect Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359127067-30079-13-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox