mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 06/14] atmel_mci: version 0x5xx of the IP have a different clk div
Date: Fri, 25 Jan 2013 16:17:39 +0100	[thread overview]
Message-ID: <1359127067-30079-6-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1359127067-30079-1-git-send-email-plagnioj@jcrosoft.com>

so detect and support it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/mci/atmel_mci.c |   65 ++++++++++++++++++++++++++++++++++-------------
 1 file changed, 47 insertions(+), 18 deletions(-)

diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index b9b0668..72d92dc 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -27,6 +27,10 @@
 
 #include "atmel-mci-regs.h"
 
+struct atmel_mci_caps {
+	bool	has_odd_clk_div;
+};
+
 struct atmel_mci {
 	struct mci_host		mci;
 	void  __iomem		*regs;
@@ -38,6 +42,10 @@ struct atmel_mci {
 	struct mci_data		*data;
 	unsigned		slot_b;
 	int			version;
+	struct atmel_mci_caps	caps;
+
+	unsigned long		bus_hz;
+	u32			mode_reg;
 };
 
 #define to_mci_host(mci)	container_of(mci, struct atmel_mci, mci)
@@ -60,25 +68,42 @@ static void atmci_ip_reset(struct atmel_mci *host)
 }
 
 static void atmci_set_clk_rate(struct atmel_mci *host,
-			       unsigned int clk_ios)
+			       unsigned int clock_min)
 {
-	unsigned int divider;
-	unsigned int clk_in = clk_get_rate(host->clk);
+	unsigned int clkdiv;
 
-	if (clk_ios > 0) {
-		divider = (clk_in / clk_ios) / 2;
-		if (divider > 0)
-			divider -= 1;
+	if (!host->mode_reg) {
+		clk_enable(host->clk);
+		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
 	}
 
-	if (clk_ios == 0 || divider > 255)
-		divider = 255;
+	if (host->caps.has_odd_clk_div) {
+		clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
+		if (clkdiv > 511) {
+			dev_dbg(host->hw_dev,
+			         "clock %u too slow; using %lu\n",
+			         clock_min, host->bus_hz / (511 + 2));
+			clkdiv = 511;
+		}
+		host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
+				 | ATMCI_MR_CLKODD(clkdiv & 1);
+	} else {
+		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
+		if (clkdiv > 255) {
+			dev_dbg(host->hw_dev,
+				 "clock %u too slow; using %lu\n",
+				 clock_min, host->bus_hz / (2 * 256));
+			clkdiv = 255;
+		}
+		host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
+	}
+
+	dev_dbg(host->hw_dev, "atmel_set_clk_rate: clkIn=%ld clkIos=%d divider=%d\n",
+		host->bus_hz, clock_min, clkdiv);
 
-	dev_dbg(host->hw_dev, "atmel_set_clk_rate: clkIn=%d clkIos=%d divider=%d\n",
-		clk_in, clk_ios, divider);
+	host->mode_reg |= ATMCI_MR_RDPROOF | ATMCI_MR_WRPROOF;
 
-	atmci_writel(host, ATMCI_MR, ATMCI_MR_CLKDIV(divider)
-		| ATMCI_MR_RDPROOF | ATMCI_MR_WRPROOF);
+	atmci_writel(host, ATMCI_MR, host->mode_reg);
 }
 
 static int atmci_poll_status(struct atmel_mci *host, u32 mask)
@@ -366,9 +391,13 @@ static void atmci_set_ios(struct mci_host *mci, struct mci_ios *ios)
 
 	if (ios->clock) {
 		atmci_set_clk_rate(host, ios->clock);
-		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
 	} else {
 		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
+		if (host->mode_reg) {
+			atmci_readl(host, ATMCI_MR);
+			clk_disable(host->clk);
+		}
+		host->mode_reg = 0;
 	}
 
 	return;
@@ -443,6 +472,7 @@ static void atmci_get_cap(struct atmel_mci *host)
 
 	switch (version & 0xf00) {
 	case 0x500:
+		host->caps.has_odd_clk_div = 1;
 	case 0x400:
 	case 0x300:
 	case 0x200:
@@ -458,7 +488,6 @@ static void atmci_get_cap(struct atmel_mci *host)
 
 static int atmci_probe(struct device_d *hw_dev)
 {
-	unsigned long clk_rate;
 	struct atmel_mci *host;
 	struct atmel_mci_platform_data *pd = hw_dev->platform_data;
 
@@ -490,12 +519,12 @@ static int atmci_probe(struct device_d *hw_dev)
 		return PTR_ERR(host->clk);
 	}
 
-	clk_rate = clk_get_rate(host->clk);
+	host->bus_hz = clk_get_rate(host->clk);
 
 	host->mci.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 
-	host->mci.f_min = clk_rate >> 9;
-	host->mci.f_max = clk_rate >> 1;
+	host->mci.f_min = DIV_ROUND_UP(host->bus_hz, 512);
+	host->mci.f_max = host->bus_hz >> 1;
 
 	atmci_get_cap(host);
 
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2013-01-25 15:19 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-25 15:14 [for master PATCH 00/14] atmel_mci: fixes and cleanup Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17 ` [PATCH 01/14] atmel_mci: rename atmel_mci_host tp atmel_mci Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 02/14] atmel_mci: rename atmel_mci_readl/writel to atmci_readl/writel Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 03/14] atmel_mci: rename all function to start with atmci Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 04/14] atmel_mci: use linux regs define Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 05/14] atmel_mci: detect IP version Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-25 15:17   ` [PATCH 07/14] atmel_mci: fix host init Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200 Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 17:31     ` Sascha Hauer
2013-01-25 17:35       ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 09/14] atmel_mci: on version 0x0 we need to reset the IP at each request Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 10/14] atmel_mci: after a software timeout the IP need to be reset Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 11/14] atmel_mci: support the SD highspeed since IP version 0x300 Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 12/14] atmel_mci: update the SD/SDIO Card Register at request time Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 13/14] atmel_mci: drop board host caps Jean-Christophe PLAGNIOL-VILLARD
2013-01-25 15:17   ` [PATCH 14/14] atmel_mci: gpio: request and configure card detect Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359127067-30079-6-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox