From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/5] at91sam9260/9g20/9261/9g10/9263: split soc lowlevel_init from generic
Date: Sat, 26 Jan 2013 19:19:55 +0100 [thread overview]
Message-ID: <1359224399-569-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20130126181809.GH26329@game.jcrosoft.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/Kconfig | 6 ++++
arch/arm/mach-at91/Makefile | 5 ++-
arch/arm/mach-at91/at91sam9260_lowlevel_init.c | 34 ++++++++++++++++++
arch/arm/mach-at91/at91sam9261_lowlevel_init.c | 34 ++++++++++++++++++
arch/arm/mach-at91/at91sam9263_lowlevel_init.c | 34 ++++++++++++++++++
arch/arm/mach-at91/at91sam926x_lowlevel_init.c | 36 ++++----------------
.../mach-at91/include/mach/at91_lowlevel_init.h | 1 +
7 files changed, 120 insertions(+), 30 deletions(-)
create mode 100644 arch/arm/mach-at91/at91sam9260_lowlevel_init.c
create mode 100644 arch/arm/mach-at91/at91sam9261_lowlevel_init.c
create mode 100644 arch/arm/mach-at91/at91sam9263_lowlevel_init.c
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a3b2aba..0216a7e 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -62,6 +62,9 @@ config AT91SAM9_RESET
config AT91SAM9G45_RESET
bool
+config AT91SAM9_LOWLEVEL_INIT
+ bool
+
comment "Atmel AT91 System-on-Chip"
config SOC_AT91RM9200
@@ -77,6 +80,7 @@ config SOC_AT91SAM9260
select HAVE_AT91_DBGU0
select HAS_MACB
select AT91SAM9_RESET
+ select AT91SAM9_LOWLEVEL_INIT
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
@@ -86,6 +90,7 @@ config SOC_AT91SAM9261
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select AT91SAM9_RESET
+ select AT91SAM9_LOWLEVEL_INIT
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
@@ -95,6 +100,7 @@ config SOC_AT91SAM9263
select HAVE_AT91_DBGU1
select HAS_MACB
select AT91SAM9_RESET
+ select AT91SAM9_LOWLEVEL_INIT
config SOC_AT91SAM9G45
bool
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 634b160..0eabeac 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -2,7 +2,10 @@ obj-y += setup.o clock.o gpio.o
obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o
obj-$(CONFIG_AT91_BOOTSTRAP) += bootstrap.o
-lowlevel_init-y = at91sam926x_lowlevel_init.o
+lowlevel_init-$(CONFIG_AT91SAM9_LOWLEVEL_INIT) = at91sam926x_lowlevel_init.o
+lowlevel_init-$(CONFIG_SOC_AT91SAM9260) += at91sam9260_lowlevel_init.o
+lowlevel_init-$(CONFIG_SOC_AT91SAM9261) += at91sam9261_lowlevel_init.o
+lowlevel_init-$(CONFIG_SOC_AT91SAM9263) += at91sam9263_lowlevel_init.o
lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
diff --git a/arch/arm/mach-at91/at91sam9260_lowlevel_init.c b/arch/arm/mach-at91/at91sam9260_lowlevel_init.c
new file mode 100644
index 0000000..c2cf8bf
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9260_lowlevel_init.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#define __LOWLEVEL_INIT__
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_pio.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_lowlevel_init.h>
+#include <mach/io.h>
+#include <init.h>
+#include <sizes.h>
+
+void __naked __bare_init reset(void)
+{
+ common_reset();
+
+ arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+
+ at91sam926x_lowlevel_init(IOMEM(AT91SAM9260_BASE_PIOC), false,
+ AT91_MATRIX_EBICSA);
+}
diff --git a/arch/arm/mach-at91/at91sam9261_lowlevel_init.c b/arch/arm/mach-at91/at91sam9261_lowlevel_init.c
new file mode 100644
index 0000000..a2e065f
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9261_lowlevel_init.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#define __LOWLEVEL_INIT__
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_pio.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_lowlevel_init.h>
+#include <mach/io.h>
+#include <init.h>
+#include <sizes.h>
+
+void __naked __bare_init reset(void)
+{
+ common_reset();
+
+ arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
+
+ at91sam926x_lowlevel_init(IOMEM(AT91SAM9261_BASE_PIOC), false,
+ AT91_MATRIX_EBICSA);
+}
diff --git a/arch/arm/mach-at91/at91sam9263_lowlevel_init.c b/arch/arm/mach-at91/at91sam9263_lowlevel_init.c
new file mode 100644
index 0000000..5260658
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263_lowlevel_init.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#define __LOWLEVEL_INIT__
+
+#include <common.h>
+#include <asm/system.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_pio.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_lowlevel_init.h>
+#include <mach/io.h>
+#include <init.h>
+#include <sizes.h>
+
+void __naked __bare_init reset(void)
+{
+ common_reset();
+
+ arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+
+ at91sam926x_lowlevel_init(IOMEM(AT91SAM9263_BASE_PIOD), true,
+ AT91_MATRIX_EBI0CSA);
+}
diff --git a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
index 14afbc9..8b9b33e 100644
--- a/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
+++ b/arch/arm/mach-at91/at91sam926x_lowlevel_init.c
@@ -46,7 +46,8 @@ static int inline running_in_sram(void)
return addr == 0;
}
-void __bare_init at91sam926x_lowlevel_init(void)
+void __bare_init at91sam926x_lowlevel_init(void *pio, bool is_pio_asr,
+ u32 matrix_csa)
{
u32 r;
int i;
@@ -58,20 +59,12 @@ void __bare_init at91sam926x_lowlevel_init(void)
__raw_writel(cfg.wdt_mr, AT91_BASE_WDT + AT91_WDT_MR);
/* configure PIOx as EBI0 D[16-31] */
-#ifdef CONFIG_ARCH_AT91SAM9263
- __raw_writel(cfg.ebi_pio_pdr, AT91_BASE_PIOD + PIO_PDR);
- __raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOD + PIO_PUDR);
- __raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOD + PIO_ASR);
-#else
- __raw_writel(cfg.ebi_pio_pdr, AT91_BASE_PIOC + PIO_PDR);
- __raw_writel(cfg.ebi_pio_ppudr, AT91_BASE_PIOC + PIO_PUDR);
-#endif
+ __raw_writel(cfg.ebi_pio_pdr, pio + PIO_PDR);
+ __raw_writel(cfg.ebi_pio_ppudr, pio + PIO_PUDR);
+ if (is_pio_asr)
+ __raw_writel(cfg.ebi_pio_ppudr, pio + PIO_ASR);
-#if defined(AT91_MATRIX_EBI0CSA)
- at91_sys_write(AT91_MATRIX_EBI0CSA, cfg.ebi_csa);
-#else /* AT91_MATRIX_EBICSA */
- at91_sys_write(AT91_MATRIX_EBICSA, cfg.ebi_csa);
-#endif
+ at91_sys_write(matrix_csa, cfg.ebi_csa);
/* flash */
at91_smc_write(cfg.smc_cs, AT91_SMC_MODE, cfg.smc_mode);
@@ -193,18 +186,3 @@ void __bare_init at91sam926x_lowlevel_init(void)
end:
board_init_lowlevel_return();
}
-
-void __naked __bare_init reset(void)
-{
- common_reset();
-
-#ifdef CONFIG_ARCH_AT91SAM9263
- arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
- arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
- arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
-#endif
-
- at91sam926x_lowlevel_init();
-}
diff --git a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
index 29d9628..8c53ce7 100644
--- a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
+++ b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
@@ -29,5 +29,6 @@ struct at91sam926x_lowlevel_cfg {
};
void at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg);
+void at91sam926x_lowlevel_init(void *pio, bool is_pio_asr, u32 matrix_csa);
#endif /* __AT91_LOWLEVEL_INIT_H__ */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-01-26 18:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-26 18:18 [PATCH 0/5] at91sam9261: add bootstrap and firstage support Jean-Christophe PLAGNIOL-VILLARD
2013-01-26 18:19 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-26 18:19 ` [PATCH 2/5] at91: introduce AT91_LOAD_BAREBOX_SRAM to specifcy which size load for external boot Jean-Christophe PLAGNIOL-VILLARD
2013-01-26 18:19 ` [PATCH 3/5] at91sam9261ek: add spi support Jean-Christophe PLAGNIOL-VILLARD
2013-01-26 18:19 ` [PATCH 4/5] at91sam9261ek: add boostrap support Jean-Christophe PLAGNIOL-VILLARD
2013-01-26 18:19 ` [PATCH 5/5] at91sam9261ek: add first stage support Jean-Christophe PLAGNIOL-VILLARD
2013-01-26 21:59 ` Sascha Hauer
2013-01-26 23:14 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-31 13:22 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-31 13:23 ` [PATCH 0/5] at91sam9261: add bootstrap and firstage support Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359224399-569-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox