From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 26/34] ARM: Setup stack at end of SDRAM
Date: Sun, 27 Jan 2013 11:46:55 +0100 [thread overview]
Message-ID: <1359283623-1782-27-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1359283623-1782-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/cpu/cpu.c | 12 ++++++++++++
arch/arm/cpu/start-pbl.c | 2 +-
arch/arm/cpu/start.c | 9 ++++++++-
arch/arm/include/asm/barebox-arm.h | 4 ++++
common/meminfo.c | 5 -----
5 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/arch/arm/cpu/cpu.c b/arch/arm/cpu/cpu.c
index 2ca871f..7761f5c 100644
--- a/arch/arm/cpu/cpu.c
+++ b/arch/arm/cpu/cpu.c
@@ -28,6 +28,7 @@
#include <asm/mmu.h>
#include <asm/system.h>
#include <asm/memory.h>
+#include <asm-generic/memory_layout.h>
#include <asm/system_info.h>
#include <asm/cputype.h>
#include <asm/cache.h>
@@ -91,6 +92,17 @@ void arch_shutdown(void)
__asm__ __volatile__("msr cpsr, %0" : : "r"(r));
}
+extern unsigned long arm_stack_top;
+
+static int arm_request_stack(void)
+{
+ if (!request_sdram_region("stack", arm_stack_top - STACK_SIZE, STACK_SIZE))
+ pr_err("Error: Cannot request SDRAM region for stack\n");
+
+ return 0;
+}
+coredevice_initcall(arm_request_stack);
+
#ifdef CONFIG_THUMB2_BAREBOX
static void thumb2_execute(void *func, int argc, char *argv[])
{
diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
index 4fa1f32..1900daa 100644
--- a/arch/arm/cpu/start-pbl.c
+++ b/arch/arm/cpu/start-pbl.c
@@ -205,7 +205,7 @@ static noinline __noreturn void __barebox_arm_entry(uint32_t membase,
void __naked __noreturn barebox_arm_entry(uint32_t membase, uint32_t memsize,
uint32_t boarddata)
{
- arm_setup_stack(STACK_BASE + STACK_SIZE - 16);
+ arm_setup_stack(membase + memsize - ARM_RESERVE_MEM_SIZE - 16);
__barebox_arm_entry(membase, memsize, boarddata);
}
diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
index 64de5da..530fb09 100644
--- a/arch/arm/cpu/start.c
+++ b/arch/arm/cpu/start.c
@@ -26,11 +26,18 @@
#include <asm/cache.h>
#include <memory.h>
+unsigned long arm_stack_top;
+
static noinline __noreturn void __start(uint32_t membase, uint32_t memsize,
uint32_t boarddata)
{
+ unsigned long endmem = membase + memsize;
+
setup_c();
+ arm_stack_top = endmem;
+ endmem -= STACK_SIZE; /* Stack */
+
start_barebox();
}
@@ -63,7 +70,7 @@ void __naked __section(.text_entry) start(void)
void __naked __noreturn barebox_arm_entry(uint32_t membase, uint32_t memsize,
uint32_t boarddata)
{
- arm_setup_stack(STACK_BASE + STACK_SIZE - 16);
+ arm_setup_stack(membase + memsize - ARM_RESERVE_MEM_SIZE - 16);
__start(membase, memsize, boarddata);
}
diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h
index 42b7a3f..988e6e8 100644
--- a/arch/arm/include/asm/barebox-arm.h
+++ b/arch/arm/include/asm/barebox-arm.h
@@ -25,6 +25,8 @@
#ifndef _BAREBOX_ARM_H_
#define _BAREBOX_ARM_H_
+#include <sizes.h>
+
/* cpu/.../cpu.c */
int cleanup_before_linux(void);
@@ -40,4 +42,6 @@ uint32_t get_runtime_offset(void);
void setup_c(void);
void __noreturn barebox_arm_entry(uint32_t membase, uint32_t memsize, uint32_t boarddata);
+#define ARM_RESERVE_MEM_SIZE SZ_128K
+
#endif /* _BAREBOX_ARM_H_ */
diff --git a/common/meminfo.c b/common/meminfo.c
index a09b2d2..5e3ff71 100644
--- a/common/meminfo.c
+++ b/common/meminfo.c
@@ -14,11 +14,6 @@ static int display_meminfo(void)
debug("bss segment: 0x%p -> 0x%p\n", __bss_start, __bss_stop - 1);
printf("malloc space: 0x%08lx -> 0x%08lx (size %s)\n",
mstart, mend, size_human_readable(msize));
-#ifdef CONFIG_ARM
- printf("stack space: 0x%08x -> 0x%08x (size %s)\n",
- STACK_BASE, STACK_BASE + STACK_SIZE - 1,
- size_human_readable(STACK_SIZE));
-#endif
return 0;
}
late_initcall(display_meminfo);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-01-27 10:47 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-27 10:46 [PATCH] Add new ARM entry point for barebox Sascha Hauer
2013-01-27 10:46 ` [PATCH 01/34] ARM: Add new " Sascha Hauer
2013-01-27 10:46 ` [PATCH 02/34] ARM: add __noreturn to board_init_lowlevel_return Sascha Hauer
2013-01-27 10:46 ` [PATCH 03/34] ARM i.MX: Use SRAM stack in lowlevel code Sascha Hauer
2013-01-27 10:46 ` [PATCH 04/34] ARM i.MX: Add i.MX specific entry point for barebox Sascha Hauer
2013-01-27 10:46 ` [PATCH 05/34] ARM i.MX: prepare external nand boot for SoC specific entry Sascha Hauer
2013-01-27 10:46 ` [PATCH 06/34] ARM i.MX boards: switch to barebox_arm_entry Sascha Hauer
2013-01-27 10:46 ` [PATCH 07/34] ARM MXS " Sascha Hauer
2013-01-27 10:46 ` [PATCH 08/34] ARM OMAP " Sascha Hauer
2013-01-27 10:46 ` [PATCH 09/34] ARM Samsung " Sascha Hauer
2013-01-27 10:46 ` [PATCH 10/34] ARM PXA " Sascha Hauer
2013-01-27 10:46 ` [PATCH 11/34] ARM ep93xx " Sascha Hauer
2013-01-27 10:46 ` [PATCH 12/34] ARM tegra " Sascha Hauer
2013-01-27 10:46 ` [PATCH 13/34] ARM nomadik " Sascha Hauer
2013-01-27 10:46 ` [PATCH 14/34] ARM versatile " Sascha Hauer
2013-01-27 10:46 ` [PATCH 15/34] ARM netx " Sascha Hauer
2013-01-27 10:46 ` [PATCH 16/34] ARM clep7212: " Sascha Hauer
2013-01-27 16:32 ` Alexander Shiyan
2013-01-28 7:41 ` Sascha Hauer
2013-01-27 10:46 ` [PATCH 17/34] ARM raspberrypi: " Sascha Hauer
2013-01-27 10:46 ` [PATCH 18/34] ARM AT91 mmccpu: Fix non existing define Sascha Hauer
2013-01-27 10:46 ` [PATCH 19/34] ARM AT91: switch to barebox_arm_entry part1 Sascha Hauer
2013-01-27 10:51 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:09 ` Sascha Hauer
2013-01-27 10:46 ` [PATCH 20/34] ARM AT91: switch at91rm9200 board to barebox_arm_entry Sascha Hauer
2013-01-27 10:46 ` [PATCH 21/34] ARM AT91: switch remaining boards " Sascha Hauer
2013-01-27 16:24 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 10:46 ` [PATCH 22/34] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT Sascha Hauer
2013-01-27 10:46 ` [PATCH 23/34] ARM start-pbl: make board_init_lowlevel_return static Sascha Hauer
2013-01-27 10:46 ` [PATCH 24/34] ARM start-pbl: call uncompressed binary with arguments Sascha Hauer
2013-01-27 10:46 ` [PATCH 25/34] ARM start: pickup parameters from pbl Sascha Hauer
2013-01-27 10:46 ` Sascha Hauer [this message]
2013-01-27 10:46 ` [PATCH 27/34] ARM pbl: Use dynamic parameters for early malloc space Sascha Hauer
2013-01-27 10:46 ` [PATCH 28/34] ARM mmu: pickup already enabled mmu Sascha Hauer
2013-01-27 10:46 ` [PATCH 29/34] ARM: Factor out early mmu code Sascha Hauer
2013-01-27 14:54 ` Alexander Aring
2013-01-28 7:35 ` Sascha Hauer
2013-01-27 10:46 ` [PATCH 30/34] ARM: Enable mmu early Sascha Hauer
2013-01-27 10:47 ` [PATCH 31/34] ARM: Automatically determine malloc size Sascha Hauer
2013-01-27 10:47 ` [PATCH 32/34] generic memory layout: fix deps for [MALLOC|STACK]_BASE Sascha Hauer
2013-01-27 10:47 ` [PATCH 33/34] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT Sascha Hauer
2013-01-27 10:47 ` [PATCH 34/34] ARM pbl: inline decompress function Sascha Hauer
2013-02-01 7:59 [PATCH v2] Add new ARM entry point for barebox Sascha Hauer
2013-02-01 7:59 ` [PATCH 26/34] ARM: Setup stack at end of SDRAM Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359283623-1782-27-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox