From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH 3/8] at91sam9261: add atmel lcdc frambuffer support
Date: Sun, 27 Jan 2013 12:20:44 +0100 [thread overview]
Message-ID: <1359285649-18717-3-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1359285649-18717-1-git-send-email-plagnioj@jcrosoft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/mach-at91/at91sam9261_devices.c | 53 ++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 5241894..e9ca51c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -208,6 +208,59 @@ void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
#endif
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_DRIVER_VIDEO_ATMEL)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data)
+{
+ BUG_ON(!data);
+
+ data->have_intensity_bit = true;
+
+#if defined(CONFIG_FB_ATMEL_STN)
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+#else
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+#endif
+
+ add_generic_device("atmel_lcdfb", DEVICE_ID_SINGLE, NULL, AT91SAM9261_LCDC_BASE, SZ_4K,
+ IORESOURCE_MEM, data);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data) {}
+#endif
+
resource_size_t __init at91_configure_dbgu(void)
{
at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-01-27 11:22 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-27 11:07 [For-nex PATCH 0/8 v2] at91: add atmel lcdc framebuffer support Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:20 ` [PATCH 1/8] video: add atmel lcdc frambuffer support Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:20 ` [PATCH 2/8] at91sam9263: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:20 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-27 11:20 ` [PATCH 4/8] at91sam9g45: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:20 ` [PATCH 5/8] at91sam9m10g45ek: add lcdc support Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:20 ` [PATCH 6/8] at91sam9m10ihd: add lcd support Jean-Christophe PLAGNIOL-VILLARD
2013-01-28 8:48 ` Sascha Hauer
2013-01-28 9:26 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:20 ` [PATCH 7/8] at91sam9261ek: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-27 11:20 ` [PATCH 8/8] at91sam9263ek: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-28 7:33 ` [For-nex PATCH 0/8 v2] at91: add atmel lcdc framebuffer support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359285649-18717-3-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox