From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/6] atmel_lcdfb: factorise common code between lcdc and new hlcdc IP
Date: Thu, 31 Jan 2013 00:20:12 +0100 [thread overview]
Message-ID: <1359588017-20045-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20130130230825.GX26329@game.jcrosoft.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/video/Makefile | 2 +-
drivers/video/atmel_lcdfb.c | 313 +++-----------------
drivers/video/atmel_lcdfb.h | 37 +++
.../video/{atmel_lcdfb.c => atmel_lcdfb_core.c} | 259 ++--------------
4 files changed, 102 insertions(+), 509 deletions(-)
create mode 100644 drivers/video/atmel_lcdfb.h
copy drivers/video/{atmel_lcdfb.c => atmel_lcdfb_core.c} (53%)
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 1953307..724ef99 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -1,6 +1,6 @@
obj-$(CONFIG_VIDEO) += fb.o
-obj-$(CONFIG_DRIVER_VIDEO_ATMEL) += atmel_lcdfb.o
+obj-$(CONFIG_DRIVER_VIDEO_ATMEL) += atmel_lcdfb.o atmel_lcdfb_core.o
obj-$(CONFIG_DRIVER_VIDEO_STM) += stm.o
obj-$(CONFIG_DRIVER_VIDEO_IMX) += imx.o
obj-$(CONFIG_DRIVER_VIDEO_IMX_IPU) += imx-ipu-fb.o
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 3a49688..736b25e 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -25,50 +25,19 @@
#include <common.h>
#include <io.h>
#include <init.h>
-#include <linux/clk.h>
-#include <fb.h>
-#include <video/atmel_lcdc.h>
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/cpu.h>
#include <errno.h>
-#include <linux/err.h>
-#include <malloc.h>
#include <asm/mmu.h>
-struct atmel_lcdfb_info {
- struct fb_info info;
- void __iomem *mmio;
- struct device_d *device;
-
- unsigned int guard_time;
- unsigned int smem_len;
- struct clk *bus_clk;
- struct clk *lcdc_clk;
-
- struct atmel_lcdfb_platform_data *pdata;
-};
-
-#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
+#include "atmel_lcdfb.h"
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
-static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
-{
- clk_enable(sinfo->bus_clk);
- clk_enable(sinfo->lcdc_clk);
-}
-
-static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
-{
- clk_disable(sinfo->bus_clk);
- clk_disable(sinfo->lcdc_clk);
-}
-
static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
{
unsigned long value;
@@ -94,7 +63,7 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
return value;
}
-static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo, u32 flags)
{
/* Turn off the LCD controller and the DMA controller */
lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
@@ -105,11 +74,9 @@ static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
mdelay(10);
lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-}
-
-static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
-{
- atmel_lcdfb_stop_nowait(sinfo);
+
+ if (flags & ATMEL_LCDC_STOP_NOWAIT)
+ return;
/* Wait for DMA engine to become idle... */
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
@@ -126,31 +93,6 @@ static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
| ATMEL_LCDC_PWR);
}
-static void atmel_lcdc_power_controller(struct fb_info *fb_info, int i)
-{
- struct atmel_lcdfb_info *sinfo = fb_info->priv;
- struct atmel_lcdfb_platform_data *pdata = sinfo->pdata;
-
- if (pdata->atmel_lcdfb_power_control)
- pdata->atmel_lcdfb_power_control(1);
-}
-
-/**
- * @param fb_info Framebuffer information
- */
-static void atmel_lcdc_enable_controller(struct fb_info *fb_info)
-{
- atmel_lcdc_power_controller(fb_info, 1);
-}
-
-/**
- * @param fb_info Framebuffer information
- */
-static void atmel_lcdc_disable_controller(struct fb_info *fb_info)
-{
- atmel_lcdc_power_controller(fb_info, 0);
-}
-
static void atmel_lcdfb_update_dma(struct fb_info *info)
{
struct atmel_lcdfb_info *sinfo = info->priv;
@@ -164,29 +106,39 @@ static void atmel_lcdfb_update_dma(struct fb_info *info)
lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
}
-static void atmel_lcdfb_set_par(struct fb_info *info)
+static void atmel_lcdfb_limit_screeninfo(struct fb_videomode *mode)
+{
+ /* Saturate vertical and horizontal timings at maximum values */
+ mode->vsync_len = min_t(u32, mode->vsync_len,
+ (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
+ mode->upper_margin = min_t(u32, mode->upper_margin,
+ ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
+ mode->lower_margin = min_t(u32, mode->lower_margin,
+ ATMEL_LCDC_VFP);
+ mode->right_margin = min_t(u32, mode->right_margin,
+ (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
+ mode->hsync_len = min_t(u32, mode->hsync_len,
+ (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
+ mode->left_margin = min_t(u32, mode->left_margin,
+ ATMEL_LCDC_HBP + 1);
+
+}
+
+static void atmel_lcdfb_setup_core(struct fb_info *info)
{
struct atmel_lcdfb_info *sinfo = info->priv;
struct atmel_lcdfb_platform_data *pdata = sinfo->pdata;
struct fb_videomode *mode = info->mode;
unsigned long clk_value_khz;
- unsigned long value;
unsigned long pix_factor = 2;
unsigned long hozval_linesz;
-
- atmel_lcdfb_stop(sinfo);
-
- /* Re-initialize the DMA engine... */
- dev_dbg(&info->dev, " * update DMA engine\n");
- atmel_lcdfb_update_dma(info);
+ unsigned long value;
/* ...set frame size and burst length = 8 words (?) */
value = (mode->yres * mode->xres * info->bits_per_pixel) / 32;
value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
- /* Now, the LCDC core... */
-
/* Set pixel clock */
if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es())
pix_factor = 1;
@@ -271,228 +223,31 @@ static void atmel_lcdfb_set_par(struct fb_info *info)
/* ...wait for DMA engine to become idle... */
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
mdelay(10);
-
- atmel_lcdfb_start(sinfo);
-
- dev_dbg(&info->dev, " * DONE\n");
}
-static int atmel_lcdfb_check_var(struct fb_info *info)
+static void atmel_lcdfb_init_contrast(struct atmel_lcdfb_info *sinfo)
{
- struct device_d *dev = &info->dev;
- struct atmel_lcdfb_info *sinfo = info->priv;
- struct atmel_lcdfb_platform_data *pdata = sinfo->pdata;
- struct fb_videomode *mode = info->mode;
- unsigned long clk_value_khz;
-
- clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-
- dev_dbg(dev, "%s:\n", __func__);
-
- if (!(mode->pixclock && info->bits_per_pixel)) {
- dev_err(dev, "needed value not specified\n");
- return -EINVAL;
- }
-
- dev_dbg(dev, " resolution: %ux%u\n", mode->xres, mode->yres);
- dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(mode->pixclock));
- dev_dbg(dev, " bpp: %u\n", info->bits_per_pixel);
- dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
-
- if (PICOS2KHZ(mode->pixclock) > clk_value_khz) {
- dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(mode->pixclock));
- return -EINVAL;
- }
-
- /* Saturate vertical and horizontal timings at maximum values */
- mode->vsync_len = min_t(u32, mode->vsync_len,
- (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
- mode->upper_margin = min_t(u32, mode->upper_margin,
- ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
- mode->lower_margin = min_t(u32, mode->lower_margin,
- ATMEL_LCDC_VFP);
- mode->right_margin = min_t(u32, mode->right_margin,
- (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
- mode->hsync_len = min_t(u32, mode->hsync_len,
- (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
- mode->left_margin = min_t(u32, mode->left_margin,
- ATMEL_LCDC_HBP + 1);
-
- /* Some parameters can't be zero */
- mode->vsync_len = max_t(u32, mode->vsync_len, 1);
- mode->right_margin = max_t(u32, mode->right_margin, 1);
- mode->hsync_len = max_t(u32, mode->hsync_len, 1);
- mode->left_margin = max_t(u32, mode->left_margin, 1);
-
- switch (info->bits_per_pixel) {
- case 1:
- case 2:
- case 4:
- case 8:
- info->red.offset = info->green.offset = info->blue.offset = 0;
- info->red.length = info->green.length = info->blue.length
- = info->bits_per_pixel;
- break;
- case 16:
- /* Older SOCs use IBGR:555 rather than BGR:565. */
- if (pdata->have_intensity_bit)
- info->green.length = 5;
- else
- info->green.length = 6;
- if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:5X5 mode */
- info->red.offset = info->green.length + 5;
- info->blue.offset = 0;
- } else {
- /* BGR:5X5 mode */
- info->red.offset = 0;
- info->blue.offset = info->green.length + 5;
- }
- info->green.offset = 5;
- info->red.length = info->blue.length = 5;
- break;
- case 32:
- info->transp.offset = 24;
- info->transp.length = 8;
- /* fall through */
- case 24:
- if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:888 mode */
- info->red.offset = 16;
- info->blue.offset = 0;
- } else {
- /* BGR:888 mode */
- info->red.offset = 0;
- info->blue.offset = 16;
- }
- info->green.offset = 8;
- info->red.length = info->green.length = info->blue.length = 8;
- break;
- default:
- dev_err(dev, "color depth %d not supported\n",
- info->bits_per_pixel);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
-{
- struct fb_info *info = &sinfo->info;
- struct fb_videomode *mode = info->mode;
- unsigned int smem_len;
-
- free(info->screen_base);
-
- smem_len = (mode->xres * mode->yres
- * ((info->bits_per_pixel + 7) / 8));
- smem_len = max(smem_len, sinfo->smem_len);
-
- info->screen_base = dma_alloc_coherent(smem_len);
-
- if (!info->screen_base)
- return -ENOMEM;
-
- memset(info->screen_base, 0, smem_len);
-
- return 0;
-}
-
-/**
- * Prepare the video hardware for a specified video mode
- * @param fb_info Framebuffer information
- * @param mode The video mode description to initialize
- * @return 0 on success
- */
-static int atmel_lcdc_activate_var(struct fb_info *info)
-{
- struct atmel_lcdfb_info *sinfo = info->priv;
unsigned long value;
- int ret;
-
- ret = atmel_lcdfb_alloc_video_memory(sinfo);
- if (ret)
- return ret;
- atmel_lcdfb_set_par(info);
-
- /* Set contrast */
value = ATMEL_LCDC_PS_DIV8 |
ATMEL_LCDC_POL_POSITIVE |
ATMEL_LCDC_ENA_PWMENABLE;
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
-
- return atmel_lcdfb_check_var(info);
}
-/*
- * There is only one video hardware instance available.
- * It makes no sense to dynamically allocate this data
- */
-static struct fb_ops atmel_lcdc_ops = {
- .fb_activate_var = atmel_lcdc_activate_var,
- .fb_enable = atmel_lcdc_enable_controller,
- .fb_disable = atmel_lcdc_disable_controller,
+struct atmel_lcdfb_devdata atmel_lcdfb_data = {
+ .start = atmel_lcdfb_start,
+ .stop = atmel_lcdfb_stop,
+ .update_dma = atmel_lcdfb_update_dma,
+ .setup_core = atmel_lcdfb_setup_core,
+ .init_contrast = atmel_lcdfb_init_contrast,
+ .limit_screeninfo = atmel_lcdfb_limit_screeninfo,
};
static int atmel_lcdc_probe(struct device_d *dev)
{
- struct atmel_lcdfb_info *sinfo;
- struct atmel_lcdfb_platform_data *pdata = dev->platform_data;
- int ret = 0;
- struct fb_info *info;
-
- if (!pdata) {
- dev_err(dev, "missing platform_data\n");
- return -EINVAL;
- }
-
- sinfo = xzalloc(sizeof(*sinfo));
- sinfo->pdata = pdata;
- sinfo->mmio = dev_request_mem_region(dev, 0);
-
- /* just init */
- info = &sinfo->info;
- info->priv = sinfo;
- info->fbops = &atmel_lcdc_ops;
- info->mode_list = pdata->mode_list;
- info->num_modes = pdata->num_modes;
- info->mode = &info->mode_list[0];
- info->xres = info->mode->xres;
- info->yres = info->mode->yres;
- info->bits_per_pixel = pdata->default_bpp;
-
- /* Enable LCDC Clocks */
- sinfo->bus_clk = clk_get(dev, "hck1");
- if (IS_ERR(sinfo->bus_clk)) {
- ret = PTR_ERR(sinfo->bus_clk);
- goto err;
- }
- sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
- if (IS_ERR(sinfo->lcdc_clk)) {
- ret = PTR_ERR(sinfo->lcdc_clk);
- goto put_bus_clk;
- }
-
- atmel_lcdfb_start_clock(sinfo);
-
- ret = register_framebuffer(info);
- if (ret != 0) {
- dev_err(dev, "Failed to register framebuffer\n");
- goto stop_clk;
- }
-
- return ret;
-
-stop_clk:
- atmel_lcdfb_stop_clock(sinfo);
- clk_put(sinfo->lcdc_clk);
-put_bus_clk:
- clk_put(sinfo->bus_clk);
-err:
- return ret;
+ return atmel_lcdc_register(dev, &atmel_lcdfb_data);
}
static struct driver_d atmel_lcdc_driver = {
diff --git a/drivers/video/atmel_lcdfb.h b/drivers/video/atmel_lcdfb.h
new file mode 100644
index 0000000..6c53dd4
--- /dev/null
+++ b/drivers/video/atmel_lcdfb.h
@@ -0,0 +1,37 @@
+
+#include <fb.h>
+#include <video/atmel_lcdc.h>
+
+struct atmel_lcdfb_info;
+
+struct atmel_lcdfb_devdata {
+ void (*start)(struct atmel_lcdfb_info *sinfo);
+ void (*stop)(struct atmel_lcdfb_info *sinfo, u32 flags);
+ void (*update_dma)(struct fb_info *info);
+ void (*setup_core)(struct fb_info *info);
+ void (*init_contrast)(struct atmel_lcdfb_info *sinfo);
+ void (*limit_screeninfo)(struct fb_videomode *mode);
+ int fbinfo_flags;
+ int dma_desc_size;
+};
+
+struct atmel_lcdfb_info {
+ struct fb_info info;
+ void __iomem *mmio;
+ struct device_d *device;
+
+ unsigned int guard_time;
+ unsigned int smem_len;
+ struct clk *bus_clk;
+ struct clk *lcdc_clk;
+
+ struct atmel_lcdfb_platform_data *pdata;
+ struct atmel_lcdfb_devdata *dev_data;
+};
+
+#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
+#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
+
+#define ATMEL_LCDC_STOP_NOWAIT (1 << 0)
+
+int atmel_lcdc_register(struct device_d *dev, struct atmel_lcdfb_devdata *data);
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb_core.c
similarity index 53%
copy from drivers/video/atmel_lcdfb.c
copy to drivers/video/atmel_lcdfb_core.c
index 3a49688..528bcd8 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb_core.c
@@ -24,38 +24,12 @@
#include <common.h>
#include <io.h>
-#include <init.h>
-#include <linux/clk.h>
-#include <fb.h>
-#include <video/atmel_lcdc.h>
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/cpu.h>
-#include <errno.h>
#include <linux/err.h>
+#include <linux/clk.h>
#include <malloc.h>
#include <asm/mmu.h>
-struct atmel_lcdfb_info {
- struct fb_info info;
- void __iomem *mmio;
- struct device_d *device;
-
- unsigned int guard_time;
- unsigned int smem_len;
- struct clk *bus_clk;
- struct clk *lcdc_clk;
-
- struct atmel_lcdfb_platform_data *pdata;
-};
-
-#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
-
-/* configurable parameters */
-#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
-#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
+#include "atmel_lcdfb.h"
static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
{
@@ -69,63 +43,6 @@ static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
clk_disable(sinfo->lcdc_clk);
}
-static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
-{
- unsigned long value;
-
- if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
- || cpu_is_at32ap7000()))
- return xres;
-
- value = xres;
- if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
- /* STN display */
- if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR)
- value *= 3;
-
- if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
- || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
- && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
- value = DIV_ROUND_UP(value, 4);
- else
- value = DIV_ROUND_UP(value, 8);
- }
-
- return value;
-}
-
-static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
-{
- /* Turn off the LCD controller and the DMA controller */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* Wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- mdelay(10);
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-}
-
-static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
-{
- atmel_lcdfb_stop_nowait(sinfo);
-
- /* Wait for DMA engine to become idle... */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- mdelay(10);
-}
-
-static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
-{
- struct atmel_lcdfb_platform_data *pdata = sinfo->pdata;
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, pdata->default_dmacon);
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
- | ATMEL_LCDC_PWR);
-}
-
static void atmel_lcdc_power_controller(struct fb_info *fb_info, int i)
{
struct atmel_lcdfb_info *sinfo = fb_info->priv;
@@ -151,131 +68,6 @@ static void atmel_lcdc_disable_controller(struct fb_info *fb_info)
atmel_lcdc_power_controller(fb_info, 0);
}
-static void atmel_lcdfb_update_dma(struct fb_info *info)
-{
- struct atmel_lcdfb_info *sinfo = info->priv;
- unsigned long dma_addr;
-
- dma_addr = (unsigned long)info->screen_base;
-
- dma_addr &= ~3UL;
-
- /* Set framebuffer DMA base address and pixel offset */
- lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-}
-
-static void atmel_lcdfb_set_par(struct fb_info *info)
-{
- struct atmel_lcdfb_info *sinfo = info->priv;
- struct atmel_lcdfb_platform_data *pdata = sinfo->pdata;
- struct fb_videomode *mode = info->mode;
- unsigned long clk_value_khz;
- unsigned long value;
- unsigned long pix_factor = 2;
- unsigned long hozval_linesz;
-
- atmel_lcdfb_stop(sinfo);
-
- /* Re-initialize the DMA engine... */
- dev_dbg(&info->dev, " * update DMA engine\n");
- atmel_lcdfb_update_dma(info);
-
- /* ...set frame size and burst length = 8 words (?) */
- value = (mode->yres * mode->xres * info->bits_per_pixel) / 32;
- value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
- lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
-
- /* Now, the LCDC core... */
-
- /* Set pixel clock */
- if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es())
- pix_factor = 1;
-
- clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-
- value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(mode->pixclock));
-
- if (value < pix_factor) {
- dev_notice(&info->dev, "Bypassing pixel clock divider\n");
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
- } else {
- value = (value / pix_factor) - 1;
- dev_dbg(&info->dev, " * programming CLKVAL = 0x%08lx\n",
- value);
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
- value << ATMEL_LCDC_CLKVAL_OFFSET);
- mode->pixclock =
- KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1)));
- dev_dbg(&info->dev, " updated pixclk: %lu KHz\n",
- PICOS2KHZ(mode->pixclock));
- }
-
- /* Initialize control register 2 */
- value = pdata->default_lcdcon2;
-
- if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT))
- value |= ATMEL_LCDC_INVLINE_INVERTED;
- if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
- value |= ATMEL_LCDC_INVFRAME_INVERTED;
-
- switch (info->bits_per_pixel) {
- case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
- case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
- case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
- case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
- case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
- case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
- case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
- default: BUG(); break;
- }
- dev_dbg(&info->dev, " * LCDCON2 = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
-
- /* Vertical timing */
- value = (mode->vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
- value |= mode->upper_margin << ATMEL_LCDC_VBP_OFFSET;
- value |= mode->lower_margin;
- dev_dbg(&info->dev, " * LCDTIM1 = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
-
- /* Horizontal timing */
- value = (mode->right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
- value |= (mode->hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
- value |= (mode->left_margin - 1);
- dev_dbg(&info->dev, " * LCDTIM2 = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-
- /* Horizontal value (aka line size) */
- hozval_linesz = compute_hozval(mode->xres,
- lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
-
- /* Display size */
- value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
- value |= mode->yres - 1;
- dev_dbg(&info->dev, " * LCDFRMCFG = %08lx\n", value);
- lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-
- /* FIFO Threshold: Use formula from data sheet */
- value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
- lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
-
- /* Toggle LCD_MODE every frame */
- lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
-
- /* Disable all interrupts */
- lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-
- /* Enable FIFO & DMA errors */
- lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
-
- /* ...wait for DMA engine to become idle... */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- mdelay(10);
-
- atmel_lcdfb_start(sinfo);
-
- dev_dbg(&info->dev, " * DONE\n");
-}
static int atmel_lcdfb_check_var(struct fb_info *info)
{
@@ -305,6 +97,9 @@ static int atmel_lcdfb_check_var(struct fb_info *info)
}
/* Saturate vertical and horizontal timings at maximum values */
+ if (sinfo->dev_data->limit_screeninfo)
+ sinfo->dev_data->limit_screeninfo(mode);
+
mode->vsync_len = min_t(u32, mode->vsync_len,
(ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
mode->upper_margin = min_t(u32, mode->upper_margin,
@@ -377,6 +172,26 @@ static int atmel_lcdfb_check_var(struct fb_info *info)
return 0;
}
+static void atmel_lcdfb_set_par(struct fb_info *info)
+{
+ struct atmel_lcdfb_info *sinfo = info->priv;
+
+ if (sinfo->dev_data->stop)
+ sinfo->dev_data->stop(sinfo, ATMEL_LCDC_STOP_NOWAIT);
+
+ /* Re-initialize the DMA engine... */
+ dev_dbg(&info->dev, " * update DMA engine\n");
+ sinfo->dev_data->update_dma(info);
+
+ /* Now, the LCDC core... */
+ sinfo->dev_data->setup_core(info);
+
+ if (sinfo->dev_data->start)
+ sinfo->dev_data->start(sinfo);
+
+ dev_dbg(&info->dev, " * DONE\n");
+}
+
static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
{
struct fb_info *info = &sinfo->info;
@@ -408,7 +223,6 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
static int atmel_lcdc_activate_var(struct fb_info *info)
{
struct atmel_lcdfb_info *sinfo = info->priv;
- unsigned long value;
int ret;
ret = atmel_lcdfb_alloc_video_memory(sinfo);
@@ -417,12 +231,8 @@ static int atmel_lcdc_activate_var(struct fb_info *info)
atmel_lcdfb_set_par(info);
- /* Set contrast */
- value = ATMEL_LCDC_PS_DIV8 |
- ATMEL_LCDC_POL_POSITIVE |
- ATMEL_LCDC_ENA_PWMENABLE;
- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+ if (sinfo->dev_data->init_contrast)
+ sinfo->dev_data->init_contrast(sinfo);
return atmel_lcdfb_check_var(info);
}
@@ -437,7 +247,7 @@ static struct fb_ops atmel_lcdc_ops = {
.fb_disable = atmel_lcdc_disable_controller,
};
-static int atmel_lcdc_probe(struct device_d *dev)
+int atmel_lcdc_register(struct device_d *dev, struct atmel_lcdfb_devdata *data)
{
struct atmel_lcdfb_info *sinfo;
struct atmel_lcdfb_platform_data *pdata = dev->platform_data;
@@ -453,6 +263,8 @@ static int atmel_lcdc_probe(struct device_d *dev)
sinfo->pdata = pdata;
sinfo->mmio = dev_request_mem_region(dev, 0);
+ sinfo->dev_data = data;
+
/* just init */
info = &sinfo->info;
info->priv = sinfo;
@@ -494,14 +306,3 @@ put_bus_clk:
err:
return ret;
}
-
-static struct driver_d atmel_lcdc_driver = {
- .name = "atmel_lcdfb",
- .probe = atmel_lcdc_probe,
-};
-
-static int atmel_lcdc_init(void)
-{
- return platform_driver_register(&atmel_lcdc_driver);
-}
-device_initcall(atmel_lcdc_init);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-01-30 23:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-30 23:08 [PATCH 0/6] atmel: add Atmel HLCDC support and boards Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-01-30 23:20 ` [PATCH 2/6] video: add Atmel HLCD support Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20 ` [PATCH 3/6] at91sam9x5: add lcd support Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20 ` [PATCH 4/6] at91sam9x5ek: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20 ` [PATCH 5/6] sama5d3: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 23:20 ` [PATCH 6/6] sama5d3xek: " Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359588017-20045-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox