From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 08/36] ARM OMAP boards: switch to barebox_arm_entry
Date: Sun, 3 Feb 2013 16:10:08 +0100 [thread overview]
Message-ID: <1359904236-11622-8-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1359904236-11622-1-git-send-email-plagnioj@jcrosoft.com>
From: Sascha Hauer <s.hauer@pengutronix.de>
All boards use hardcoded SDRAM addresses, copied from the board init file.
OMAP3 boards are a bit special, they had a SoC specific reset() function. This
is renamed to omap3_invalidate_dcache() and called from the board lowlevel init
code now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/Kconfig | 2 ++
arch/arm/boards/archosg9/Makefile | 4 ++--
arch/arm/boards/archosg9/lowlevel.c | 3 ++-
arch/arm/boards/beagle/lowlevel.c | 16 ++++++++++++++--
arch/arm/boards/beaglebone/Makefile | 2 ++
arch/arm/boards/beaglebone/lowlevel.c | 12 +++++++++++-
arch/arm/boards/omap343xdsp/lowlevel.c | 15 +++++++++++++--
arch/arm/boards/omap3evm/lowlevel.c | 13 +++++++++++--
arch/arm/boards/panda/lowlevel.c | 7 ++++---
arch/arm/boards/pcm049/lowlevel.c | 7 ++++---
arch/arm/boards/pcm051/Makefile | 2 ++
arch/arm/boards/pcm051/lowlevel.c | 11 +++++++++++
arch/arm/boards/phycard-a-l1/lowlevel.c | 12 ++++++++++--
arch/arm/boards/phycard-a-xl2/lowlevel.c | 7 ++++---
arch/arm/mach-omap/Kconfig | 5 -----
arch/arm/mach-omap/include/mach/omap3-silicon.h | 1 +
arch/arm/mach-omap/omap3_core.S | 11 ++++-------
17 files changed, 97 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/boards/pcm051/lowlevel.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 627c1b5..96ee516 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -82,6 +82,8 @@ config ARCH_OMAP
bool "TI OMAP"
select HAS_DEBUG_LL
select GPIOLIB
+ select MACH_HAS_LOWLEVEL_INIT
+ select MACH_DO_LOWLEVEL_INIT
config ARCH_PXA
bool "Intel/Marvell PXA based"
diff --git a/arch/arm/boards/archosg9/Makefile b/arch/arm/boards/archosg9/Makefile
index 450c03f..4cc5a2e 100644
--- a/arch/arm/boards/archosg9/Makefile
+++ b/arch/arm/boards/archosg9/Makefile
@@ -1,4 +1,4 @@
obj-y += board.o
obj-$(CONFIG_ARM_BOARD_APPEND_ATAG) += archos_features.o
-obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel.o mux.o
-pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += lowlevel.o mux.o
+obj-y += lowlevel.o mux.o
+pbl-y += lowlevel.o mux.o
diff --git a/arch/arm/boards/archosg9/lowlevel.c b/arch/arm/boards/archosg9/lowlevel.c
index aea6342..26808f6 100644
--- a/arch/arm/boards/archosg9/lowlevel.c
+++ b/arch/arm/boards/archosg9/lowlevel.c
@@ -13,6 +13,7 @@
#include <common.h>
#include <io.h>
#include <init.h>
+#include <sizes.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-clock.h>
@@ -63,7 +64,7 @@ static noinline void archosg9_init_lowlevel(void)
omap4_ddr_init(&ddr_regs_400_mhz_2cs, &core);
- board_init_lowlevel_return();
+ barebox_arm_entry(0x80000000, SZ_1G, 0);
}
void __naked __bare_init reset(void)
diff --git a/arch/arm/boards/beagle/lowlevel.c b/arch/arm/boards/beagle/lowlevel.c
index 677f055..c0abbe8 100644
--- a/arch/arm/boards/beagle/lowlevel.c
+++ b/arch/arm/boards/beagle/lowlevel.c
@@ -1,5 +1,7 @@
#include <io.h>
-#include <init.h>
+#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
#include <mach/control.h>
#include <mach/omap3-silicon.h>
#include <mach/omap3-mux.h>
@@ -164,4 +166,14 @@ static int beagle_board_init(void)
return 0;
}
-pure_initcall(beagle_board_init);
+
+void __naked reset(void)
+{
+ omap3_invalidate_dcache();
+
+ common_reset();
+
+ beagle_board_init();
+
+ barebox_arm_entry(0x80000000, SZ_128M, 0);
+}
diff --git a/arch/arm/boards/beaglebone/Makefile b/arch/arm/boards/beaglebone/Makefile
index 88c223a..3b7261c 100644
--- a/arch/arm/boards/beaglebone/Makefile
+++ b/arch/arm/boards/beaglebone/Makefile
@@ -1,3 +1,5 @@
+obj-y += lowlevel.o
+pbl-y += lowlevel.o
obj-y += board.o
obj-y += lowlevel.o
pbl-y += lowlevel.o
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index d446e8d..b565c74 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -1,6 +1,8 @@
#include <init.h>
#include <sizes.h>
#include <io.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
#include <mach/am33xx-silicon.h>
#include <mach/am33xx-clock.h>
#include <mach/sdrc.h>
@@ -245,4 +247,12 @@ static int beaglebone_board_init(void)
return 0;
}
-pure_initcall(beaglebone_board_init);
+
+void __naked reset(void)
+{
+ common_reset();
+
+ beaglebone_board_init();
+
+ barebox_arm_entry(0x80000000, SZ_256M, 0);
+}
diff --git a/arch/arm/boards/omap343xdsp/lowlevel.c b/arch/arm/boards/omap343xdsp/lowlevel.c
index 0d2ccd4..403de91 100644
--- a/arch/arm/boards/omap343xdsp/lowlevel.c
+++ b/arch/arm/boards/omap343xdsp/lowlevel.c
@@ -1,7 +1,8 @@
#include <common.h>
#include <io.h>
-#include <init.h>
#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
#include <mach/omap3-mux.h>
#include <mach/sdrc.h>
#include <mach/control.h>
@@ -543,4 +544,14 @@ static int sdp343x_board_init(void)
return 0;
}
-pure_initcall(sdp343x_board_init);
+
+void __naked reset(void)
+{
+ omap3_invalidate_dcache();
+
+ common_reset();
+
+ sdp343x_board_init();
+
+ barebox_arm_entry(0x80000000, SZ_128M, 0);
+}
diff --git a/arch/arm/boards/omap3evm/lowlevel.c b/arch/arm/boards/omap3evm/lowlevel.c
index 9050c09..49ecb85 100644
--- a/arch/arm/boards/omap3evm/lowlevel.c
+++ b/arch/arm/boards/omap3evm/lowlevel.c
@@ -1,7 +1,8 @@
-#include <common.h>
#include <io.h>
#include <init.h>
#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
#include <mach/omap3-mux.h>
#include <mach/sdrc.h>
#include <mach/control.h>
@@ -157,4 +158,12 @@ static int omap3_evm_board_init(void)
return 0;
}
-pure_initcall(omap3_evm_board_init);
+
+void __naked reset(void)
+{
+ common_reset();
+
+ omap3_evm_board_init();
+
+ barebox_arm_entry(0x80000000, SZ_128M, 0);
+}
diff --git a/arch/arm/boards/panda/lowlevel.c b/arch/arm/boards/panda/lowlevel.c
index 36e2bc5..df0f9c1 100644
--- a/arch/arm/boards/panda/lowlevel.c
+++ b/arch/arm/boards/panda/lowlevel.c
@@ -18,6 +18,7 @@
*/
#include <common.h>
#include <io.h>
+#include <sizes.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-clock.h>
@@ -70,8 +71,6 @@ static void noinline panda_init_lowlevel(void)
/* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
omap4_scale_vcores(TPS62361_VSEL0_GPIO);
-
- board_init_lowlevel_return();
}
void reset(void)
@@ -79,9 +78,11 @@ void reset(void)
common_reset();
if (get_pc() > 0x80000000)
- board_init_lowlevel_return();
+ goto out;
arm_setup_stack(0x4030d000);
panda_init_lowlevel();
+out:
+ barebox_arm_entry(0x80000000, SZ_1G, 0);
}
diff --git a/arch/arm/boards/pcm049/lowlevel.c b/arch/arm/boards/pcm049/lowlevel.c
index b64244c..8ecf81a 100644
--- a/arch/arm/boards/pcm049/lowlevel.c
+++ b/arch/arm/boards/pcm049/lowlevel.c
@@ -18,6 +18,7 @@
*/
#include <common.h>
#include <io.h>
+#include <sizes.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-clock.h>
@@ -80,8 +81,6 @@ static void noinline pcm049_init_lowlevel(void)
sr32(0x4A30a31C, 16, 4, 0x0); /* set divisor to 1 */
sr32(0x4A30a110, 0, 1, 0x1); /* set the clock source to active */
sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */
-
- board_init_lowlevel_return();
}
void reset(void)
@@ -89,9 +88,11 @@ void reset(void)
common_reset();
if (get_pc() > 0x80000000)
- board_init_lowlevel_return();
+ goto out;
arm_setup_stack(0x4030d000);
pcm049_init_lowlevel();
+out:
+ barebox_arm_entry(0x80000000, SZ_512M, 0);
}
diff --git a/arch/arm/boards/pcm051/Makefile b/arch/arm/boards/pcm051/Makefile
index dcfc293..8a571d9 100644
--- a/arch/arm/boards/pcm051/Makefile
+++ b/arch/arm/boards/pcm051/Makefile
@@ -1 +1,3 @@
+obj-y += lowlevel.o
+pbl-y += lowlevel.o
obj-y += board.o
diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
new file mode 100644
index 0000000..683fdce
--- /dev/null
+++ b/arch/arm/boards/pcm051/lowlevel.c
@@ -0,0 +1,11 @@
+#include <common.h>
+#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+void __naked reset(void)
+{
+ common_reset();
+
+ barebox_arm_entry(0x80000000, SZ_512M, 0);
+}
diff --git a/arch/arm/boards/phycard-a-l1/lowlevel.c b/arch/arm/boards/phycard-a-l1/lowlevel.c
index d82c43d..6043d8a 100644
--- a/arch/arm/boards/phycard-a-l1/lowlevel.c
+++ b/arch/arm/boards/phycard-a-l1/lowlevel.c
@@ -1,7 +1,8 @@
-#include <common.h>
#include <io.h>
#include <init.h>
#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
#include <mach/omap3-mux.h>
#include <mach/sdrc.h>
#include <mach/control.h>
@@ -247,5 +248,12 @@ static int pcaal1_board_init(void)
return 0;
}
-pure_initcall(pcaal1_board_init);
+void __naked reset(void)
+{
+ common_reset();
+
+ pcaal1_board_init();
+
+ barebox_arm_entry(0x80000000, SZ_256M, 0);
+}
diff --git a/arch/arm/boards/phycard-a-xl2/lowlevel.c b/arch/arm/boards/phycard-a-xl2/lowlevel.c
index 5d8693a..f8f4db5 100644
--- a/arch/arm/boards/phycard-a-xl2/lowlevel.c
+++ b/arch/arm/boards/phycard-a-xl2/lowlevel.c
@@ -18,6 +18,7 @@
*/
#include <common.h>
#include <io.h>
+#include <sizes.h>
#include <mach/omap4-mux.h>
#include <mach/omap4-silicon.h>
#include <mach/omap4-clock.h>
@@ -80,8 +81,6 @@ static noinline void pcaaxl2_init_lowlevel(void)
sr32(0x4A30a31C, 16, 4, 0x0); /* set divisor to 1 */
sr32(0x4A30a110, 0, 1, 0x1); /* set the clock source to active */
sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */
-
- board_init_lowlevel_return();
}
void reset(void)
@@ -89,9 +88,11 @@ void reset(void)
common_reset();
if (get_pc() > 0x80000000)
- board_init_lowlevel_return();
+ goto out;
arm_setup_stack(0x4030d000);
pcaaxl2_init_lowlevel();
+out:
+ barebox_arm_entry(0x80000000, SZ_512M, 0);
}
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index f659184..a87fc4b 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -29,7 +29,6 @@ config ARCH_OMAP3
bool "OMAP3"
select CPU_V7
select GENERIC_GPIO
- select MACH_HAS_LOWLEVEL_INIT
select OMAP_CLOCK_SOURCE_S32K
help
Say Y here if you are using Texas Instrument's OMAP343x based platform
@@ -148,7 +147,6 @@ config MACH_OMAP3EVM
config MACH_PANDA
bool "Texas Instrument's Panda Board"
- select MACH_HAS_LOWLEVEL_INIT
select HAVE_DEFAULT_ENVIRONMENT_NEW
depends on ARCH_OMAP4
help
@@ -156,7 +154,6 @@ config MACH_PANDA
config MACH_ARCHOSG9
bool "Archos G9 tablets"
- select MACH_HAS_LOWLEVEL_INIT
depends on ARCH_OMAP4
help
Say Y here if you are using OMAP4-based Archos G9 tablet
@@ -164,7 +161,6 @@ config MACH_ARCHOSG9
config MACH_PCM049
bool "Phytec phyCORE pcm049"
depends on ARCH_OMAP4
- select MACH_HAS_LOWLEVEL_INIT
help
Say Y here if you are using Phytecs phyCORE pcm049 board
based on OMAP4
@@ -177,7 +173,6 @@ config MACH_PCAAL1
config MACH_PCAAXL2
bool "Phytec phyCARD XL2"
- select MACH_HAS_LOWLEVEL_INIT
depends on ARCH_OMAP4
help
Say Y here if you are using a phyCARD-A-XL1 PCA-A-XL1
diff --git a/arch/arm/mach-omap/include/mach/omap3-silicon.h b/arch/arm/mach-omap/include/mach/omap3-silicon.h
index 282b587..43b2953 100644
--- a/arch/arm/mach-omap/include/mach/omap3-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap3-silicon.h
@@ -133,6 +133,7 @@
/* If Architecture specific init functions are present */
#ifndef __ASSEMBLY__
void omap3_core_init(void);
+void omap3_invalidate_dcache(void);
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARCH_OMAP3_H */
diff --git a/arch/arm/mach-omap/omap3_core.S b/arch/arm/mach-omap/omap3_core.S
index bc32f55..a47e248 100644
--- a/arch/arm/mach-omap/omap3_core.S
+++ b/arch/arm/mach-omap/omap3_core.S
@@ -33,9 +33,8 @@
#include <mach/clocks.h>
#include <asm/barebox-arm-head.h>
-#ifdef CONFIG_MACH_DO_LOWLEVEL_INIT
-.section .text.__reset
-ENTRY(reset)
+.section .text.__omap3_invalidate_dcache
+ENTRY(omap3_invalidate_dcache)
/* Invalidate all Dcaches */
#ifndef CONFIG_CPU_V7_DCACHE_SKIP
/* If Arch specific ROM code SMI handling does not exist */
@@ -83,8 +82,6 @@ finished_inval:
mcr p15, 2, r10, c0, c0, 0 /* select current cache level in cssr */
isb
#endif /* CONFIG_CPU_V7_DCACHE_SKIP */
- common_reset r0
/* back to arch calling code */
- b board_init_lowlevel_return
-ENDPROC(reset)
-#endif
+ bx lr
+ENDPROC(omap3_invalidate_dcache)
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-02-03 15:12 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-03 15:03 [PATCH v3] Add new ARM entry point for barebox Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 01/36] ARM: Add new " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 02/36] ARM: add __noreturn to board_init_lowlevel_return Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 03/36] ARM i.MX: Use SRAM stack in lowlevel code Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 04/36] ARM i.MX: Add i.MX specific entry point for barebox Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 05/36] ARM i.MX: prepare external nand boot for SoC specific entry Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 06/36] ARM i.MX boards: switch to barebox_arm_entry Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 07/36] ARM MXS " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-02-03 15:10 ` [PATCH 09/36] ARM Samsung " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 10/36] ARM PXA " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 11/36] ARM ep93xx " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 12/36] ARM tegra " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 13/36] ARM nomadik " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 14/36] ARM versatile " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 15/36] ARM netx " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 16/36] ARM clep7212: " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 17/36] ARM raspberrypi: " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 18/36] ARM AT91: switch at91sam9 to barebox_arm_entry part1 Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 19/36] ARM AT91: switch at91rm9200 board to barebox_arm_entry Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 20/36] ARM AT91: switch at91sam9g45 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 21/36] ARM AT91: switch at91sam9x5 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 22/36] ARM AT91: switch at91sam9n12 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 23/36] ARM AT91: switch sama5d3 " Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 24/36] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 25/36] ARM start-pbl: make board_init_lowlevel_return static Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 26/36] ARM start-pbl: call uncompressed binary with arguments Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 27/36] ARM start: pickup parameters from pbl Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 28/36] ARM: Setup stack at end of SDRAM Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 29/36] ARM pbl: Use dynamic parameters for early malloc space Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 30/36] ARM mmu: pickup already enabled mmu Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 31/36] ARM: Factor out early mmu code Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 32/36] ARM: Enable mmu early Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 33/36] ARM: Automatically determine malloc size Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 34/36] generic memory layout: fix deps for [MALLOC|STACK]_BASE Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 35/36] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT Jean-Christophe PLAGNIOL-VILLARD
2013-02-03 15:10 ` [PATCH 36/36] ARM pbl: inline decompress function Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359904236-11622-8-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox