From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/1] phy/micrel: KSZ9021 diasable Asym Pause support
Date: Fri, 8 Feb 2013 09:55:50 +0100 [thread overview]
Message-ID: <1360313750-21146-1-git-send-email-plagnioj@jcrosoft.com> (raw)
Due to a hw bug do not enable teh Asym_Pause.
Otherwise if you ser the bit 11 in 4h you will have to unplug
and replug the cable to make the phy work.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/net/phy/micrel.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index ed5abf8..c0bcdd1 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -148,11 +148,15 @@ static struct phy_driver ksphy_driver[] = {
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
}, {
+ /*
+ * Due to a hw bug do not enable the Asym_Pause.
+ * Otherwise if you set the bit 11 in 4h you will have to unplug
+ * and replug the cable to make the phy work.
+ */
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
.drv.name = "Micrel KSZ9021 Gigabit PHY",
- .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
- | SUPPORTED_Asym_Pause),
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-02-08 8:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-08 8:55 Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-02-11 9:58 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360313750-21146-1-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox