* [PATCH] DeviceTree: add support for initrd in the DT
@ 2013-02-10 15:22 Vicente Bergas
2013-02-10 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 2+ messages in thread
From: Vicente Bergas @ 2013-02-10 15:22 UTC (permalink / raw)
To: barebox; +Cc: Vicente Bergas
Add the initrd start and end address to the DT, code comes from u-boot.
Use this addition on the ArchosG9 board as an example.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
---
arch/arm/boards/archosg9/env/config | 1 +
arch/arm/configs/archosg9_defconfig | 4 ++
arch/arm/configs/archosg9_xload_defconfig | 1 +
arch/arm/lib/armlinux.c | 1 +
common/oftree.c | 66 +++++++++++++++++++++++++++++++
include/of.h | 1 +
6 files changed, 74 insertions(+)
diff --git a/arch/arm/boards/archosg9/env/config b/arch/arm/boards/archosg9/env/config
index 8f3edb0..60467f6 100644
--- a/arch/arm/boards/archosg9/env/config
+++ b/arch/arm/boards/archosg9/env/config
@@ -1,3 +1,4 @@
global.bootm.image="${TARGET_ROOT}/boot/zImage"
global.bootm.initrd="${TARGET_ROOT}/boot/initrd"
+global.bootm.oftree="${TARGET_ROOT}/boot/omap4-archosg9.dtb"
global.linux.bootargs.base="console=ttyO0,115200n8 root=/dev/ram0"
diff --git a/arch/arm/configs/archosg9_defconfig b/arch/arm/configs/archosg9_defconfig
index 9a051da..337a7b7 100644
--- a/arch/arm/configs/archosg9_defconfig
+++ b/arch/arm/configs/archosg9_defconfig
@@ -45,6 +45,9 @@ CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
CONFIG_CMD_BOOTM_AIMAGE=y
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_NODE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_MAGICVAR=y
@@ -68,3 +71,4 @@ CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
CONFIG_FS_OMAP4_USBBOOT=y
+CONFIG_OFDEVICE=y
diff --git a/arch/arm/configs/archosg9_xload_defconfig b/arch/arm/configs/archosg9_xload_defconfig
index 83743fa..b25778a 100644
--- a/arch/arm/configs/archosg9_xload_defconfig
+++ b/arch/arm/configs/archosg9_xload_defconfig
@@ -21,4 +21,5 @@ CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT=y
# CONFIG_SPI is not set
# CONFIG_FS_RAMFS is not set
# CONFIG_FS_DEVFS is not set
+CONFIG_FS_FAT=y
CONFIG_FS_OMAP4_USBBOOT=y
diff --git a/arch/arm/lib/armlinux.c b/arch/arm/lib/armlinux.c
index 40a63ea..166984a 100644
--- a/arch/arm/lib/armlinux.c
+++ b/arch/arm/lib/armlinux.c
@@ -266,6 +266,8 @@ void start_linux(void *adr, int swap, unsigned long initrd_address,
if (oftree) {
printf("booting Linux kernel with devicetree\n");
+ fdt_initrd(oftree, initrd_address,
+ initrd_address+initrd_size, 1);
params = oftree;
} else {
setup_tags(initrd_address, initrd_size, swap);
diff --git a/common/oftree.c b/common/oftree.c
index 0df5209..3ec6a63 100644
--- a/common/oftree.c
+++ b/common/oftree.c
@@ -246,6 +246,72 @@ int fdt_get_path_or_create(struct fdt_header *fdt, const char *path)
return nodeoffset;
}
+int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
+{
+ int nodeoffset;
+ int err, j, total;
+ u32 tmp;
+ const char *path;
+ uint64_t addr, size;
+
+ /* Find the "chosen" node. */
+ nodeoffset = fdt_path_offset(fdt, "/chosen");
+
+ /* If there is no "chosen" node in the blob return */
+ if (nodeoffset < 0) {
+ printf("fdt_initrd: %s\n", fdt_strerror(nodeoffset));
+ return nodeoffset;
+ }
+
+ /* just return if initrd_start/end aren't valid */
+ if ((initrd_start == 0) || (initrd_end == 0))
+ return 0;
+
+ total = fdt_num_mem_rsv(fdt);
+
+ /*
+ * Look for an existing entry and update it. If we don't find
+ * the entry, we will j be the next available slot.
+ */
+ for (j = 0; j < total; j++) {
+ err = fdt_get_mem_rsv(fdt, j, &addr, &size);
+ if (addr == initrd_start) {
+ fdt_del_mem_rsv(fdt, j);
+ break;
+ }
+ }
+
+ err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start);
+ if (err < 0) {
+ printf("fdt_initrd: %s\n", fdt_strerror(err));
+ return err;
+ }
+
+ path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
+ if ((path == NULL) || force) {
+ tmp = __cpu_to_be32(initrd_start);
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,initrd-start", &tmp, sizeof(tmp));
+ if (err < 0) {
+ printf("WARNING: "
+ "could not set linux,initrd-start %s.\n",
+ fdt_strerror(err));
+ return err;
+ }
+ tmp = __cpu_to_be32(initrd_end);
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,initrd-end", &tmp, sizeof(tmp));
+ if (err < 0) {
+ printf("WARNING: could not set linux,initrd-end %s.\n",
+ fdt_strerror(err));
+
+ return err;
+ }
+ }
+
+ return 0;
+}
+
static int of_fixup_bootargs(struct fdt_header *fdt)
{
int nodeoffset;
diff --git a/include/of.h b/include/of.h
index d3a310f..dcb4c4b 100644
--- a/include/of.h
+++ b/include/of.h
@@ -18,6 +18,7 @@ void do_fixup_by_path(struct fdt_header *fdt, const char *path, const char *prop
void do_fixup_by_path_u32(struct fdt_header *fdt, const char *path, const char *prop,
u32 val, int create);
int fdt_get_path_or_create(struct fdt_header *fdt, const char *path);
+int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force);
#define OF_BAD_ADDR ((u64)-1)
--
1.8.1.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] DeviceTree: add support for initrd in the DT
2013-02-10 15:22 [PATCH] DeviceTree: add support for initrd in the DT Vicente Bergas
@ 2013-02-10 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 2+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-02-10 16:01 UTC (permalink / raw)
To: Vicente Bergas; +Cc: barebox
On 16:22 Sun 10 Feb , Vicente Bergas wrote:
> Add the initrd start and end address to the DT, code comes from u-boot.
> Use this addition on the ArchosG9 board as an example.
split it in 2 patch
>
> Signed-off-by: Vicente Bergas <vicencb@gmail.com>
> ---
> arch/arm/boards/archosg9/env/config | 1 +
> arch/arm/configs/archosg9_defconfig | 4 ++
> arch/arm/configs/archosg9_xload_defconfig | 1 +
> arch/arm/lib/armlinux.c | 1 +
> common/oftree.c | 66 +++++++++++++++++++++++++++++++
> include/of.h | 1 +
> 6 files changed, 74 insertions(+)
>
> diff --git a/arch/arm/boards/archosg9/env/config b/arch/arm/boards/archosg9/env/config
> index 8f3edb0..60467f6 100644
> --- a/arch/arm/boards/archosg9/env/config
> +++ b/arch/arm/boards/archosg9/env/config
> @@ -1,3 +1,4 @@
> global.bootm.image="${TARGET_ROOT}/boot/zImage"
> global.bootm.initrd="${TARGET_ROOT}/boot/initrd"
> +global.bootm.oftree="${TARGET_ROOT}/boot/omap4-archosg9.dtb"
> global.linux.bootargs.base="console=ttyO0,115200n8 root=/dev/ram0"
> diff --git a/arch/arm/configs/archosg9_defconfig b/arch/arm/configs/archosg9_defconfig
> index 9a051da..337a7b7 100644
> --- a/arch/arm/configs/archosg9_defconfig
> +++ b/arch/arm/configs/archosg9_defconfig
> @@ -45,6 +45,9 @@ CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
> CONFIG_CMD_BOOTM_AIMAGE=y
> CONFIG_CMD_RESET=y
> CONFIG_CMD_GO=y
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_OF_PROPERTY=y
> +CONFIG_CMD_OF_NODE=y
> CONFIG_CMD_TIMEOUT=y
> CONFIG_CMD_PARTITION=y
> CONFIG_CMD_MAGICVAR=y
> @@ -68,3 +71,4 @@ CONFIG_FS_FAT=y
> CONFIG_FS_FAT_WRITE=y
> CONFIG_FS_FAT_LFN=y
> CONFIG_FS_OMAP4_USBBOOT=y
> +CONFIG_OFDEVICE=y
> diff --git a/arch/arm/configs/archosg9_xload_defconfig b/arch/arm/configs/archosg9_xload_defconfig
> index 83743fa..b25778a 100644
> --- a/arch/arm/configs/archosg9_xload_defconfig
> +++ b/arch/arm/configs/archosg9_xload_defconfig
> @@ -21,4 +21,5 @@ CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT=y
> # CONFIG_SPI is not set
> # CONFIG_FS_RAMFS is not set
> # CONFIG_FS_DEVFS is not set
> +CONFIG_FS_FAT=y
> CONFIG_FS_OMAP4_USBBOOT=y
> diff --git a/arch/arm/lib/armlinux.c b/arch/arm/lib/armlinux.c
> index 40a63ea..166984a 100644
> --- a/arch/arm/lib/armlinux.c
> +++ b/arch/arm/lib/armlinux.c
> @@ -266,6 +266,8 @@ void start_linux(void *adr, int swap, unsigned long initrd_address,
>
> if (oftree) {
> printf("booting Linux kernel with devicetree\n");
> + fdt_initrd(oftree, initrd_address,
> + initrd_address+initrd_size, 1);
why you do not check the return?
> params = oftree;
> } else {
> setup_tags(initrd_address, initrd_size, swap);
> diff --git a/common/oftree.c b/common/oftree.c
> index 0df5209..3ec6a63 100644
> --- a/common/oftree.c
> +++ b/common/oftree.c
> @@ -246,6 +246,72 @@ int fdt_get_path_or_create(struct fdt_header *fdt, const char *path)
> return nodeoffset;
> }
>
> +int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
> +{
> + int nodeoffset;
use tab or 1 space
> + int err, j, total;
> + u32 tmp;
> + const char *path;
> + uint64_t addr, size;
> +
> + /* Find the "chosen" node. */
> + nodeoffset = fdt_path_offset(fdt, "/chosen");
> +
> + /* If there is no "chosen" node in the blob return */
> + if (nodeoffset < 0) {
> + printf("fdt_initrd: %s\n", fdt_strerror(nodeoffset));
> + return nodeoffset;
> + }
> +
> + /* just return if initrd_start/end aren't valid */
> + if ((initrd_start == 0) || (initrd_end == 0))
> + return 0;
> +
> + total = fdt_num_mem_rsv(fdt);
> +
> + /*
> + * Look for an existing entry and update it. If we don't find
> + * the entry, we will j be the next available slot.
> + */
> + for (j = 0; j < total; j++) {
> + err = fdt_get_mem_rsv(fdt, j, &addr, &size);
> + if (addr == initrd_start) {
> + fdt_del_mem_rsv(fdt, j);
> + break;
> + }
> + }
> +
> + err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start);
> + if (err < 0) {
> + printf("fdt_initrd: %s\n", fdt_strerror(err));
> + return err;
> + }
> +
> + path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
> + if ((path == NULL) || force) {
!path
> + tmp = __cpu_to_be32(initrd_start);
why __cpu_to_be32
> + err = fdt_setprop(fdt, nodeoffset,
> + "linux,initrd-start", &tmp, sizeof(tmp));
> + if (err < 0) {
> + printf("WARNING: "
> + "could not set linux,initrd-start %s.\n",
> + fdt_strerror(err));
> + return err;
> + }
> + tmp = __cpu_to_be32(initrd_end);
> + err = fdt_setprop(fdt, nodeoffset,
> + "linux,initrd-end", &tmp, sizeof(tmp));
> + if (err < 0) {
> + printf("WARNING: could not set linux,initrd-end %s.\n",
> + fdt_strerror(err));
> +
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> static int of_fixup_bootargs(struct fdt_header *fdt)
> {
> int nodeoffset;
> diff --git a/include/of.h b/include/of.h
> index d3a310f..dcb4c4b 100644
> --- a/include/of.h
> +++ b/include/of.h
> @@ -18,6 +18,7 @@ void do_fixup_by_path(struct fdt_header *fdt, const char *path, const char *prop
> void do_fixup_by_path_u32(struct fdt_header *fdt, const char *path, const char *prop,
> u32 val, int create);
> int fdt_get_path_or_create(struct fdt_header *fdt, const char *path);
> +int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force);
>
> #define OF_BAD_ADDR ((u64)-1)
>
> --
> 1.8.1.3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-02-10 16:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-10 15:22 [PATCH] DeviceTree: add support for initrd in the DT Vicente Bergas
2013-02-10 16:01 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox